Electrical engineering training solutions

Electrical engineering training solutions

Festo electrical engineering Turnkey laboratory solutions for your training needs

To extend the scope of our worldwide leading educational solutions, Festo Didactic has developed an all-new electrical engineering range to provide complete training solutions in even more areas.

This means one source for all your training needs.

– Fluidics – Mechatronics – Automation technology – Electrical engineering and electronics

Our new, high-quality electrical engineering solution, combined with our large variety of different workstations, allows you to:

– Add electrical engineering and electronics content to your existing Festo Didactic learning system

– Ensure safe and successful transition from theory to practice – Cover all important training aims in depth – Conduct a wide range of experiments to give students practical experience of relevant technologies

– Prepare students optimally for their later professional life – Guarantee a safe learning environment

3

Fundamentals of electrical engineering TP 1011

Fundamentals of circuits with contactsTP 1211

TP 1011 – the training package that provides the ideal introduction to all aspects of electrical engineering and electronics components and systems.

Complete with built-in safety fea-tures, the universal patch panel in the reliable 19 mm grid forms the basis for electrical engineering and electronics as well as digital and closed-loop technology experiments. These are fully supplied by the basic power supply unit with inte-grated display and menu control.

TP 1211 – Fundamentals of control technology training package

Basic control circuits still have their place in modern automation tech-nology, as simple automation tasks are still set up with low-cost contac-tor circuits.

Realistic projects are built using the equipment set and practical exer-cises. The design, function and ar-eas of application of the components are explained. The right selection of switching elements and equip-ment is just as important as the cor-rect use and adjustment of protec-tive devices.

The component set contains all the components required for basic ex-periments and are clearly labeled thanks to its printed storage panel.

Advantages

– Range of configurable power supplies

– Built-in signal generator – Integrated voltage and current measurement

– A broad range of the most com-monly used electrical components

– Very safe design with safety connectors and sockets based on state-of-the-art technology

– Safe connections on the top and underside of the component housing – Measurements can thus be taken at any time without having to modify the circuit

Advantages

– 3-phase AC supply guarantees the electrical safety of the workplace

– Extremely compact equipment – Flexible thanks to the use of industrial components

– Easily expandable – Maximum effectiveness in connection with MPS® transfer line or electric machines

– Rugged angled screw-in sockets for contacting

Training aims

– Direct current: Voltage, current, Ohm’s law, series/parallel connections, linear/non-linear resistors, power and work ...

– Alternating current: Resistor, coil and capacitor in AC circuits, RC, RL and RLC mixed circuits. Star/Delta with three phase power supply ...

– Semiconductors: Different diodes and LEDs, various transistors types, diac, triac and thyristors ...

– Basic electronics circuits: Design of transistor, including: amplification circuits, signal generation, DC voltage converters, power supply circuits, use of thyristors and triacs

Optional contents

– Digital circuits – Closed-loop control

Training aims

– Use of pushbutton, switches – NO and NC contacts – Contactor and pushbutton interlocking

– Use of contactors, relays and protective devices

– Wiring and setup of overcurrent protectors in star-delta circuits

– Manually and automatically operating star-delta contactor circuits

– Timing and multifunction relays – Understanding and wiring a reversing contactor circuit

– Understanding and wiring a star-delta start-up of a 3-phase motor

– Understanding and wiring a reversing contactor circuit with automatic star

PC software

With a USB connection to the board, optional PSU remote control soft-ware allows remote control of the voltage and signal generator out-lets along with measurement visu-alization.

Additional media available

4 complete workbooks: – DC technology – AC technology – Semiconductors – Basic electronic circuits

Interactive learning software (WBT): – Electrical Engineering 1 – Electrical Engineering 2 – Electronics 1 – Electronics 2

Option: Conveyor system

The MPS® transfer line conveyor with a star-delta-capable 3-phase motor and light barrier sensors, make ex-perimenting with contactor controls even more attractive.


1 workbook: – Workbook with realistic projects

Interactive learning software (WBT): – Electric Drives 1

4 5

Servo-brake and drive systemTP 1410

Servo/Stepper motor drive technologyTP 1421/TP 1422

Electric drive technology Modern drives are characterized by bringing together electrical and me-chanical components to create com-plete drive systems.

Particularly in the case of rotating electric machines, the basic prin-ciples of the individual components along with the system approach and practicality play a crucial role. Enclosed in a compact housing, this equipment set incorporates a com-plete, flexible and convenient load and drive system, allowing students to experiment and examine drives in different realistic load situations.

Servo/Stepper motor drive technology

Coming with state-of-the-art Festo drive technology, this set al-lows complete industrial solutions to be studied and operated.

The standard rotary disk application guarantees safe and simple handling of the system throughout all stages of the introductory course. The in-tegrated limit switches support the simulation of an axis with a range of rotation of approx. 340°. Metering can be implemented to extend train-ing content.

The unique didactic concept makes a clear distinction between the unit under test, the control equipment, and the load. The practical quick-change system makes it easy to set up and change the machines to be examined.

Various motors available DC-shunt and series-wound ma-chines, universal motor, capaci-tor motor, 3-phase asynchronous 230/400V or 400/690V or synchro-nous machine – others on demand.

Additional frequency converters MicroMaster 420 and Sinamics G110/G120 frequency converters are available to further enhance learn-ing content and make projects even more interesting.

The integrated simulation box al-lows the connection of all required inputs and displays the states of all important outputs. This permits con-venient operation without any addi-tional hardware.

Mechanical options

Available as an add-on, the Festo linear axis (EGC, 600 mm) allows re-alistic measurements and examina-tion of behavior. It is supplied with 2 inductive sensors and mounts onto a profile plate. The new MPS® handling station, electrical allows full integra-tion into an automation system.

Electrical options

In combination with a PLC, the drive systems can be remotely controlled via I/O-handshake or bus systems. The controllers have CAN bus on board; optional modules are avail-able for Profibus and Device-Net.

Advantages

– Safe and compact workbench – Very convenient system to change motors

– Wide range of motors available, allowing students to experience different drive technologies

– Powerful software to visualize all relevant data of drive systems

– Various extensions available to cover a wide range of content

Training aims

DC, AC and 3-phase machines: – Wiring and start-up – Electrical and mechanical values for example current, torque, power (active, reactive, apparent), slip, efficiency, power factor ...

– Load behaviour – Load curve analysis – Motor and generator mode – Speed control – Load start-up – Rotational direction change – ...

Advantages

– State-of-the-art drives components from Festo

– Integrated test box for all important I/Os

– Mechanical and electrical expandability of learning content from basics to realistic applications.

Training aims

– Configuration and parameterization of a drive system

– Speed control of a servo/stepper motor system

– Torque control of a servo motor system

– Homing – Acceleration, deceleration, ramps and speeds

– Teaching and record positions – Positioning sequence control – Acquiring and analyzing drive system behaviour data

– System optimization

PC software

Included in the set, DriveLab allows manual control of loads, automatic recording of characteristics, and ap-plication of load models to the drive system under examination. Visualization of measurements can be customised, providing perfect support for the examination and comparison of acquired data.


3 workbooks: – DC machines – AC machines – 3-phase machines

Interactive learning software (WBT): – Electric Drives 1 – Electric Drives 2

Parameterization software

The FCT software allows complete configuration and parameterization as well as data acquisition and opti-mization of the system on a realistic industrial level.


2 workbooks: – Servo motor drive technology – Stepper motor drive technology

Interactive learning software (WBT): – Electric Drives 1 – Electric Drives 2

6 7

Power supply systems and protective measures TP 1111

KNX/EIB building automation board TP 1311

Fundamentals of electrical protective measures

Protecting people and equipment plays a very important role when us-ing electrical energy, as it is not vis-ible – only its effects can be seen. Suitable protective measures must therefore be taken to minimise risk.

Examples provide an introduction to the dangers associated with electric-ity. The existing conditions are exam-ined and the risks resulting from the relevant situation are demonstrated by measurements. The analysis and interpretation of the measurements show relationships and identify mea-sures.

KNX/EIB building technology

Modern buildings are characterised by intelligent lighting and air-condi-tioning solutions. Building automa-tion systems and bus systems play a key role here. The KNX/EIB compact board EduTrainer® is used to explain the use of this technology. Equipped with the latest generation of indus-trial components, it represents the state of the art.

Devices were selected so as to al-low realisation of the widest possible range of levels of complexity. This ensures that beginners are not over-whelmed but can use the full range of functions to meet increasing de-mands.

Advantages

– Error switches integrated in the housing under a lockable flap facilitate troubleshooting.

– Connects directly to the 3-phase power network – no additional power supply required.

– The Systainer solution included in the scope of delivery meets work, transport and storage require-ments efficiently.

– For a practical explanation of the protective measures, tests and measurements are carried out us-ing conventional test and measure-ment devices.

Advantages

– Compact, safe and easy commis-sioning

– Pushbutton sensors can be used either as rockers or as independent buttons

– The channels of the 4-fold univer-sal interface can be parameterised as both binary inputs and outputs

– A switching actuator as well as a dimming and a sunblind actuator cover all requirements for the con-trol of external actuators

– The universal simulation range, including dimmable LEDs, offers versatile options for exciting proj-ects thanks to various overlay masks.

Training aims

– A range of power supply systems (TN, TT, IT system) and designa-tions in the TN system (TN-C, TN-S, TN-C-S)

– Study and use of protective measures in different power supply systems

– Selection of the protective measure and protective devices

– Planning and execution of initial and repeat tests in accordance with the electrical directives and standards

– Evaluation of measurements – Identifying, describing and measur-ing risks due to errors

– Systematic troubleshooting

Training aims

– Study and apply KNX/EIB system fundamentals

– Use different KNX/EIB system components, for example sensors and actuators

– Program and control different components with KNX/EIB pro-gramming language in different situations and scenarios

– Program interval timers, stairwell lighting timers, heating and climate control


1 workbook: – Power supply systems and protective measures

Interactive learning software (WBT): – Electrical protective measures

Additional media

KNX certification course documen-tation:

– Basic course – Advanced course – Tutor course – System handbook

PC software

Providing PC parameterization and programming software for all compo-nents of a KNX-based building au-tomation system, the latest version ETS4 Lite can be used with systems of up to 20 bus components.

8 9

10

Electrical engineering 1 and 2

Learning content: – Closed circuit: voltage, current – Units, symbol and Ohm’s law – Resistor behavior – Resistor series and parallel connection

– Temperature and level detection – Capacitor and coil theory – Capacitor in DC and AC circuit – Coil in DC and AC circuit – Capacitor and coil applications – Power generation and transmission

Electronics 1 and 2

Learning content: – Semiconductor technology – Diode – Bipolar and field effect transistors – Regulated power supply – Amplifier – Integrated circuits – AC voltage of various frequencies – Operational amplifier – Circuit technology of amplifiers – Filters

Electrical drives 1 and 2

Learning content: – Basic principles of electric drives – Mechanical principle – Electronic principle – DC motors (shunt, brushless, etc.) – Single-phase and three-phase AC motor

– How to control a DC motor – How to control an AC motor – Energy efficiency – Environmental aspects

Protective measurements

Learning content: – The dangers of electricity – What are electrical protective measures and how are they classified?

– Protection levels, protective measures, protection classes

– Differences between DIN standards, VDE regulations and DIN-VDE standards

– Definition and overview of protective measures to prevent direct contact

– Mains systems (TN, TT, IT systems) – Testing protective measures and measuring devices

Relevant Web Based Trainings for electrical engineering We can design an efficient laboratory for you!

LabCreator

Our powerful LabCreator software enables us to design your entire lab-oratory. Festo Didactic has extensive experience and has successfully de-signed many labs all over the world, especially pneumatic, hydraulic and automation labs.

Now, with these new electrical engi-neering solutions presented in this brochure, Festo Didactic is able to do the same for your future electrical/electronics laboratory.

Please contact us – we are glad to support you.

Service Request/Reply card

Please send more Info about:

TP 1011 TP 1211 TP 1410 TP 1421 / TP 1422 TP 1111 TP 1131 Workstations for electrical engineering E-Learning solutions

I am planning new training facilities. Please take a contact for me.

I am interested in …

Please contact me:

Name

Occupation

School/Institute

Address

Email

Mobile phone

Fold, staple and mail to Festo !

Simple, professional, affordable: the learning management system Classroom Manager

The Classroom Manager is the quick and easy way to create, manage and supervise training sessions and courses. It enables you to combine presence-based courses, e-learning modules and many other training modules to make complete train-ing units.

All digital training media are avail-able in a central library. Direct access to training media greatly reduces course preparation time.

The participants are provided with the right material for each session. You can create new tests, question-naires or other training media when-ever you need for participants com-pleting courses or training sessions.

Festo worldwide

ArgentinaFesto S.A.Edison 2392(1640) MartínezProv. Buenos AiresTel. +54 (011) 4717 82 00,Fax +54 (011) 47 17 82 82E-mail: [email protected]

AustraliaFesto Pty. Ltd.Head Office (Melbourne)179-187 Browns RoadP.O. Box 261Noble Park Vic. 3174Call Toll Free 1300 88 96 96Fax Toll Free 1300 88 95 95Tel. +61(0)3 97 95 95 55,Fax +61(0)3 97 95 97 87E-mail: [email protected]

AustriaFesto Gesellschaft m.b.H.Linzer Straße 2271140 WienTel. +43 (0)1 910 75-0, Fax +43 (0)1 910 75-250E-mail: [email protected]

BelarusIP FestoMasherov avenue, 78220035 MinskTel. +375 (0)17 204 85 58,Fax +375 (0)17 204 85 59E-mail: [email protected]

BelgiumFesto Belgium sa/nvRue Colonel Bourg 1011030 Bruxelles/BrusselTel. +32 (0)2 702 32 11, Fax +32 (0)2 702 32 09E-mail: [email protected]

BrazilFesto Brasil LtdaRua Guiseppe Crespi, 76KM 12,5 - Via Anchieta04183-080 São Paulo SP-BrazílTel. +55 (0)11 50 13 16 00,Fax +55 (0)11 50 13 18 68E-mail: [email protected]

BulgariaFesto EOOD1592 SofiaBul. Christophor Kolumb 9Tel. +359 (0)2 960 07 12,Fax +359 (0)2 960 07 13E-mail: [email protected]

CanadaFesto Inc.5300 Explorer DriveMississauga, Ontario L4W 5G4Tel. +1 (0)905 624 90 00,Fax +1 (0)905 624 90 01E-mail: [email protected]

ChileFesto S.A.Avenida Américo Vespucio, 760PudahuelSantiagoTel. +56 2 690 28 00, Fax +56 2 690 28 60E-mail: [email protected]

ChinaFesto (China) Ltd.1156 Yunqiao Road,Jinqiao Export Processing Zone,Pudong,201206 ShanghaiTel. +86 21 60 81 51 00, Fax +86 21 58 54 03 00E-mail: [email protected]

ColombiaFesto Ltda.Autopista Bogotá - Medellín Km 6 (costado sur)Tenjo, CundinamarcaTel. +57 (1) 865 77 88,Fax +57 (1) 865 77 88 Ext.287E-mail: [email protected]

CroatiaFesto d.o.o.Nova Cesta 18110000 ZagrebTel. +385 (0)1 619 19 69,Fax +385 (0)1 619 18 18E-mail: [email protected]

Czech RepublicFesto, s.r.o.Modřanská 543/76147 00 Praha 4Tel. +420 261 09 96 11, Fax +420 241 77 33 84E-mail: [email protected]

DenmarkFesto A/SIslevdalvej 1802610 RødovreTel. +45 70 21 10 90, Fax +45 44 88 81 10E-mail: [email protected]

EstoniaFesto OY AB Eesti FiliaalA.H. Tammsaare tee 118B12918 TallinnDirect +372 666 15 64Mobile +372 56 50 30 50Tel. +372 666 15 60, Fax +372 666 15 61E-mail: [email protected]

FinlandFesto OYMäkituvantie 9P.O. Box 8601511 VantaaTel. +358 (09) 87 06 51,Fax +358 (09) 87 06 52 00E-mail: [email protected]

FranceFesto EurlZA des Maisons Rouges8 rue du clos sainte Catherine94360 Bry-sur-MarneTel. +33 (0) 820 20 46 40 (numéro indigo),Fax +33 (0) 820 20 46 41E-mail: [email protected]

GermanyFesto Didactic GmbH & Co. KGRechbergstr. 373770 DenkendorfGermanyTel. +49 (0)711 346 70,Fax +49 (0)711 34 75 48 85 00E-mail: [email protected]

GermanyFesto AG & Co. KGPostfach73726 EsslingenRuiter Straße 8273734 EsslingenTel. +49 (0)711 347 0, Fax +49 (0)711 347 26 28E-mail: [email protected]

GreeceFesto Ltd.40 Hamosternas Ave.P.C. 11853 AthensTel. +30 210 341 29 00, Fax +30 210 341 29 05E-mail: [email protected]

Hong KongFesto Ltd.6/F New Timely Factory Building,497 Castle Peak Road,Kowloon, Hong KongTel. + 852 27 43 83 79, Fax + 852 27 86 21 73E-mail: [email protected]

HungaryFesto Kft.Csillaghegyi út 32-34.1037 BudapestHotline +36 1 436 51 00Tel. +36 1 436 51 11, Fax +36 1 436 51 01E-mail: [email protected]

IndiaFesto Controls Private Ltd.237B,Bommasandra Industrial Area,Bangalore Hosur Highway,Bangalore 560 099Tel. +91 (0)80 22 89 41 00,Fax +91 (0)80 27 83 20 58 / 27 83 33 62E-mail: [email protected]

IndonesiaPT. FestoJL. Sultan Iskandar Muda No. 68Arteri Pondok IndahJakarta 12240Tel. +62 (0)21 27 50 79 00,Fax +62 (0)21 27 50 79 98E-mail: [email protected]

IranFesto Pneumatic S.K.# 2, 6th street, 16th avenue,Km 8, Special Karaj RoadP.O.Box 15815-1485Teheran 1389793761Tel. +98 (0)21 44 52 24 09,Fax +98 (0)21 44 52 24 08E-mail: [email protected]

IrelandFesto LimitedUnit 5 Sandyford ParkSandyford Industrial EstateDublin 18Tel. +353 (0)1 295 49 55,Fax +353 (0)1 295 56 80E-mail: [email protected]

IsraelFesto Pneumatic Israel Ltd.P.O. Box 1076Ha'atzma'ut Road 48Yehud 56100Tel. +972 (0)3 632 22 66,Fax +972 (0)3 632 22 77E-mail: [email protected]

ItalyFesto SpAVia Enrico Fermi 36/3820090 Assago (MI)Tel. +39 02 45 78 81, Fax +39 02 488 06 20E-mail: [email protected]

JapanFesto K.K.1-26-10 HayabuchiTsuzuki-kuYokohama 224-0025Tel. +81 (0)45 593 56 10 / -5611,Fax +81 (0)45 593 56 78E-mail: [email protected]

Korea SouthFesto Korea Co., Ltd.470-1 Gasan-dongGeumcheon-guSeoul #153-803Tel. +82 (0)2 850 71 14, Fax +82 (0)2 864 70 40E-mail: [email protected]

LatviaFesto SIAA. Deglava iela 601035 RigaTel. +371 67 57 78 64, Fax +371 67 57 79 46E-mail: [email protected]

LithuaniaFesto, UABPartizanų 63M50306 KaunasLietuvaTel. +370 (8)7 32 13 14, Fax +370 (8)7 32 13 15E-mail: [email protected]

MalaysiaFesto Sdn. Berhad10 Persiaran IndustriBandar Sri DamansaraWilayah Persekutuan52200 Kuala LumpurTel. +60 (0)3 62 86 80 00,Fax +60 (0)3 62 75 64 11E-mail: [email protected]

MexicoFesto Pneumatic, S.A.Av. Ceylán 3,Col. Tequesquináhuac54020 TlalnepantlaEstado de MéxicoTel. +52 (01)55 53 21 66 00,Fax +52 (01)55 53 21 66 55E-mail: [email protected]

NetherlandsFesto B.V.Schieweg 622627 AN DelftTel. +31 (0)15 251 88 99,Fax +31 (0)15 251 88 67E-mail: [email protected]

New ZealandFesto Ltd.20 Fisher CrescentMount WellingtonAucklandTel. +64 (0)9 574 10 94, Fax +64 (0)9 574 10 99E-mail: [email protected]

NigeriaFesto Automation Ltd.Motorways Centre, First Floor, Block CAlausa, Ikeja,LagosTel. +234 (0)1 794 78 20,Fax +234 (0)1 555 78 94E-mail: [email protected]

NorwayFesto ASOle Deviks vei 20666 OsloTel. +47 22 72 89 50, Fax +47 22 72 89 51E-mail: [email protected]

PeruFesto S.R.L.Amador Merino Reyna 480San IsidroLimaTel. +51 (1) 219 69 60, Fax +51 (1) 219 69 71E-mail: [email protected]

PhilippinesFesto Inc.Festo BuildingKM 18, West Service RoadSouth Super Highway1700 Paranaque CityMetro ManilaTel. +63 (2) 77 66 888, Fax +63 (2) 82 34 220/21E-mail: [email protected]

PolandFesto Sp. z o.o.Janki k/Warszawyul. Mszczonowska 705090 RaszynTel. +48 (0)22 711 41 00,Fax +48 (0)22 711 41 02E-mail: [email protected]

PortugalFesto – Automação, Unipessoal, Lda.Rua Manuel Pinto De Azevedo, 567Apartado 80134109-016 PortoContact Center: 707 20 20 43Tel. +351 22 615 61 50, Fax +351 22 615 61 89E-mail: [email protected]

RomaniaFesto S.R.L.St. Constantin 17010217 BucurestiTel. +40 (0)21 310 31 90,Fax +40 (0)21 310 24 09E-mail: [email protected]

RussiaOOO Festo-RFMichurinskiy prosp., 49119607 MoscowTel. +7 495 737 34 00, Fax +7 495 737 34 01E-mail: [email protected]

SingaporeFesto Pte. Ltd.6 Kian Teck WaySingapore 628754Tel. +65 62 64 01 52, Fax +65 62 61 10 26E-mail: [email protected]

SlovakiaFesto spol. s r.o.Gavlovicová ul. 183103 Bratislava 3Tel. +421 (0)2 49 10 49 10,Fax +421 (0)2 49 10 49 11E-mail: [email protected]

SloveniaFesto d.o.o. LjubljanaIC Trzin, Blatnica 81236 TrzinTel. +386 (0)1 530 21 00,Fax +386 (0)1 530 21 25E-mail: [email protected]

South AfricaFesto (Pty) Ltd.22-26 Electron AvenueP.O. Box 255Isando 1600Tel. +27 (0)11 971 55 00,Fax +27 (0)11 974 21 57E-mail: [email protected]

SpainFesto Pneumatic, S.A.U.Avenida Granvia, 159Distrito Económico Granvia L'H08908 Hospitalet de LlobregatBarcelonaTel.: 901243660, Fax: 902243660Tel. +34 93 261 64 00, Fax +34 93 261 64 20E-mail: [email protected]

SwedenFesto ABStillmansgatan 1Box 21038200 21 MalmöTel. +46 (0)20 38 38 40, Fax +46 (0)40 38 38 10E-mail: [email protected]

SwitzerlandFesto AGMoosmattstrasse 248953 Dietikon ZHTel. +41 (0)44 744 55 44,Fax +41 (0)44 744 55 00E-mail: [email protected]

TaiwanFesto Co., Ltd.Head Office9, Kung 8th RoadLinkou 2nd Industrial ZoneLinkou Dist., New Taipei City24450 Taiwan, R.O.C.Tel. +886 (0)2 26 01-92 81,Fax +886 (0)2 26 01 92 86-7E-mail: [email protected]

ThailandFesto Ltd.67/1 Phaholyothin Rd.,T. Klong 1, A. KlongluangPathumthani 12120Tel. +66 29 01 88 00, Fax +66 29 01 88 30E-mail: [email protected]

TurkeyFesto San. ve Tic. A.S.Tuzla Mermerciler OrganizeSanayi Bölgesi 6/1834956 Tuzla - Istanbul/TRTel. +90 (0)216 585 00 85,Fax +90 (0)216 585 00 50E-mail: [email protected]

UkraineDP Festoul. Borisoglebskaya,1104070, KievTel. +380 (0)44 239 24 30,Fax +380 (0)44 463 70 96E-mail: [email protected]

United KingdomFesto LimitedApplied Automation CentreCaswell RoadBrackmills Trading EstateNorthampton NN4 7PYTel. ++44 (0)1604 / 66 70 00,Fax ++44 (0)1604 / 66 70 01E-mail: [email protected]

United StatesFesto Corporation (New York)395 Moreland RoadP.O. Box 18023Hauppauge, NY 11788Call Toll-free 800/993 3786Fax Toll-free 800/963 3786Tel. +1(631) 435 08 00, Fax +1(631) 435 80 26E-mail: [email protected]

VenezuelaFesto C.A.Av. 23 esquina con calle 71N° 22-62, Edif. Festo.Sector ParaísoMaracaibo - VenezuelaTel. +58 (261) 759 11 20/759 41 20/759 44 38,Fax +58 (261) 759 04 55E-mail: [email protected]

VietnamFesto Co Ltd(Cong Ty TNHH FESTO)No. 1515 – 1516 Van Dai Dong StreetWard An Phu, District 2Ho Chi Minh CityTel. +84 (8) 62 81 44 53 – 4454,Fax +84 (8) 62 81 44 42E-mail: [email protected]

xxx

xxx

xxx

Fest

o xx

xxxx

xxxx

xxx

xxxx

xxxx

xxxx

xxxx

xx

Electrical engineering training solutions

Documents