Electrical Discharge Machining of AISI 329 Stainless Steel Using Copper and Brass Rotary Tubular Electrode

Procedia Materials Science 5 ( 2014 ) 1771 – 1780

Available online at www.sciencedirect.com

2211-8128 © 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of Organizing Committee of AMME 2014doi: 10.1016/j.mspro.2014.07.367

ScienceDirect

© 2014 Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).Selection and peer-review under responsibility of Organizing Committee of AMME 2014

1772 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780

1773 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780

1774 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780

1775 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780

1776 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780

1777 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780

1778 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780

1779 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780

1780 Priyaranjan Sharma et al. / Procedia Materials Science 5 ( 2014 ) 1771 – 1780