ELECTRICAL DESIGN & MANUFACTURE 9 Transport Ave, Paget QLD 4740 www.mcequip.com.au Ph: (07) 4998 5696 Fax: (07) 4998 5617 [email protected] MCE offer the capability to provide a complete electrical package, from panel design through to on site commissioning for conveyor systems and other industrial equipment. We have designed and manufactured conveyor belt starters, VVVF winch controllers, pump controllers, distributed control panels, remote solar powered monitoring stations and provided site commissioning of complex conveyor systems with multiple tripper drives and installed drive powers up to 4.5MW. Belt Starter With Remote Isolation Multi Feed changeover switch KEY SERVICES: Design & Engineering Project Management Conveyor System Electrics Panel Manufacture PLC & SCADA development Site technical support & commissioning Belt Starter Hire ELECTRICAL PROJECTS UNDERTAKEN: Dual 350KW Belt Starter with Remote Isolation Broadmeadow MG7 PLC / SCADA development 150KW Pump Station Soft Starter Solar Powered environmental monitor- ing stations DD250 Series Starter with VVVF winch Distributed I/O control panels 30KW VVVF Winch controller