ACCESSORIES THERMOMETERS TEST GAUGES THERMOWELLS THERMOWELLS CAPSULE PRESSURE GAUGES BOURDON TUBE PRESSUREGAUGES SEALS BELLOW PRESSURE GAUGES MANIFOLD PRESSURE GAUGES DIFFERENTIAL PRESSURE GAUGES DIAPHRAGM DIAPHRAGM Test pressure gauges Case diameter DN 150, 200 and 250 mm Model CBX 150 and CBI 200 Accuracy class 0.25% Safety pattern execution, class S3 with solid baffle wall and integral blow out back Model CBI 250 Accuracy class 0.1% and 0,25% open front execution Antiparallax mirror dial Individual calibration report traceable to National standard on request Connection stainless steel AISI 316 Element stainless steel or beryllium copper Carrying case available Model P400 Case diameter DN 100 and DN 150 mm Accuracy class 1,6% Ranges from 10 mbar to 25 bar Threaded or flanged process connection Glycerin or silicon oil filled case Special overload protection up to 10 times FSV (max 40 bar) Wetted parts stainless steel AISI 316L Diaphragm element in special materials (Hastelloy C276, Alloy 400, PTFE) on request Wetted parts in special materials (Hastelloy C276, Alloy 400, PTFE lined ) on request Dial to suit customer’s requirements Electrical contacts available Model P20 - Cu-Alloy wetted parts Model P200 - AISI 316 wetted parts Case diameter DN 63, 100 and 150 mm Accuracy class 1,6% Ranges from 6 mbar to 600 mbar (depending on case diameter) Stainless steel or black steel case material Zero adjustment through dial Local mounting, back flange for wall mounting or front flange for panel mounting Dial to suit customer’s requirements Model P400abs Case diameter DN 100 and DN 150 mm Accuracy class 1,6% All welded construction of pressure and datum chamber Ranges from 25 mbar to 25 bar absolute pressure Threaded or flanged process connection Glycerin or silicon oil filled case Dial to suit customer’s requirements Special overload protection up to 10 times FSV (max 25 bar) Wetted parts stainless steel AISI 316L Model P600T Bourdon pressure gauge with electrical output signal Solid front execution, class S3 Safety pattern version with solid baffle wall Case diameter DN 100 and DN 150 Ranges from 0,6 to 600 bar Stainless steel AISI 316L process connection and sensor Output signal 4...20mA Electrical connection by standard cable junction box Accuracy at 20° C: 1% ( optional 0,5%) Silicon oil filled case available Dial to suit customer’s requirements Direct or remote mounted diaphragm seals available MODEL P60 - Dry execution Case diameter DN 40 to DN 150 Case material black steel or plastic MODEL P60.5 - Liquid filled execution Case diameter DN 40 to DN 100 Case and ring stainless steel AISI 304, crimped ring MODEL P511 - Welding gauges conform to EN562 Supplied with BAM certificate for DN 63 only or UL certificate for DN 40, 50 and 63 mm Brass connection and phosphor bronze sensing element Local mounting, back flange for wall mounting or front flange or U-clamp for panel mounting Dial to suit customer’s requirements Certified since 1998, for the following activities: Design and production of pressure gauges, differential pressure gauges and diaphragm seals. Trading under own brandname of pressure gauges, mechanical thermometers and thermowells. Trading under manufacturer’s brandname of pressure gauge valves and manifolds. Differential pressure gauges Direct diaphragm pressure gauges Direct diaphragm pressure gauges for absolute pressure Pressure gauge with electrical output signal 4...20 mA Capsule pressure gauges Bourdon tube pressure gauges “all stainless steel” Bourdon tube pressure gauges “standard type” ITEC srl Via C. Battisti 114/B 28045 Invorio (NO)-ITALY Tel. (00 39) 0322 259 759 Fax (00 39) 0322 255 157 e-mail: [email protected] www.itec.it ISO9001/ UNIENISO9001:2008 Model DP200 – Capsule element for low pressure, range from 6 mbar to 250 mbar Case diameter DN 150 mm For dry and clean gases Max static pressure 250 mbar on both sides only Accuracy class 1,6% Model DP800 - Double diaphragm sensing element with torsion shaft Case diameter DN 100 and 150 mm Ranges from 60 mbar to 40 bar Pressure rating PN 40,100,250 or 400 bar Accuracy class 1,6% Glycerin or silicon oil filled case Local mounting, back flange for surface mounting and 2” pipe mounting bracket Dial to suit customer’s requirements Wetted parts stainless steel AISI 316L Diaphragm element in special materials (Hastelloy C276, Alloy 400, Inconel 600) on request Wetted parts in special materials (Hastelloy C276, Alloy 400) on request Electrical contacts available on DP800 Remote mounted diaphragm seals available on DP 800 (minimum range 160 mbar) DP 800 ATEX version II 2 GD c MODEL P600 Case diameter DN 40, 50 and 63 mm Accuracy class 1,6% Case diameter DN 100 and 150 mm Accuracy class 1,0% Model P600SF - Safety pattern execution, class S3 with solid baffle wall and integral blow out back Case diameter DN 63 mm Accuracy class 1,6% Case diameter DN 100 and 150 mm Accuracy class 1,0% Conform to European normative EN 837.1 Sensing element and connection AISI 316 L Ranges from 0,6 bar to 1600 bar (depending on case diameter) High overpressure safety execution available Wetted parts material MONEL 400 available on DN100 and 160 Glycerine or silicon filled case Local mounting, back flange for wall mounting or front flange or U-clamp for panel mounting Accuracy class 0.6% available on DN100 and 160 Electrical contacts available Direct or remote mounted diaphragm seals available ATEX version II II 2 GD c for P600 and P600SF DN 100 and 160 Dial to suit customer’s requirements Case diameter DN200 and 250 mm available Model P600PH Case diameter 4,5” – TURRET STYLE Case material Polypropylene black Safety pattern execution, class S3 with solid baffle wall and integral blow out back Accuracy class 0,5% according ANSI B40.1 grade 2A