This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Controls Group 507 E. Michigan Street P.O. Box 423, Milwaukee, WI 53202
_elevalv supe
192 4560 Val ves Elec
1/11
Code No. LIT-19
tric Valves and Actuators Rev
24560
: 0718logostanleft
97:dardft:
undefndright ft:standardSect# = 5seQ# = 433
Electric Valve and Actuator Selection Charts
Example: Valve Body Cv(Use Complete Component Code No.)Field Assembled
Body only = VG7243 CTComponents: Example 1 Example 2 Example 3Actuator VA-7150-1001 M9116-AGA-2 M150AGA-1
3/4 in. 7.3 LT 86/96 177/197 180/201 88/98 134/149 245/2731 in. 11.6 NT 54/63 112/131 114/133 55/64 84/99 155/1821 1/4 in. 18.5 PT 33/36 68/75 70/76 33/37 52/57 95/1041 1/2 in. 28.9 RT 21/22 44/46 45/47 21/23 33/35 61/642 in. 46.2 ST 13/14 28/29 28/30 14/14 21/22 39/40
Notes: [1] Factory-mounted accessories (not available for CGA models): A=Y68AA-1 transformer, 120VAC H=Y68HA-1 transformer, 24VAC ‘ D=Y68DA-1 transformer, 240VAC Blank=none required[2] Max closeoff limited in some cases to maximum body rating at 100 psi sat steam (338°F).[3] These items not available factory mounted, but can be field coupled to VG7000 valve bodies using mounting kit. [4] All electric actuators above have field reversible action.[5] Any of the three available proportional models can be used with the M120, M140, and M150: GGA for 0-10 VDC, CGA for BAS, or JGA for slidewire, for field mounting only.[6] M9116-AGC-2 and GGC-2 with two auxiliary switches also available factory-mounted, use actuator subcode 916AGC or 916GGC.
M9200 models and options are limited above to high usage, factory mounted availability. Closeoff pressures listed apply to the basic models, and do not change when using M9124 torque rating or different control signals, voltage, or accessory options on M9200 or M100 series. Do Not Use The M9108 low torque model because it has insufficient power to compress spring capsule which generates the valve stem force required to provide the maximum closeoff pressures listed above.
Controls Group 507 E. Michigan Street P.O. Box 423, Milwaukee, WI 53202Code No. LIT-1924560
Electric Valve and Actuator Selection Charts (Continued)
VG7000 Series: Non-Spring Return - Brass Trim - Steam, Chilled, or Hot WaterExample:Factory Assembled
Valve Body Cv Actuator
Complete Assembly VG7241 CT +7150G Example 1(Use Subcode) VG7241 CT +916AGA Example 2
284°F Maxi38 psig Ma Satura24 VAC Ac
Example:Field Assembled
Valve Body Cv (Use Complete Component Code No.)Body only= VG7241 CTComponents: Example 1 Example 2 Example 3Actuator VA-7150-1001 M9116-AGA-2 M150AGA-1
Example 1: Valve Cast Brass Eq% Factory mou
2/11
mum Temperatureximum ted Steamtuator
Factory-Assembled
Mounting Kit none required M9000-500 VG7000-M150M1x0 Accessory not available Not available Y68AA-1
Incremental (Drive Open / Drive Closed) Control Signal [4]Complete Actuator Code No. VA-7150-1001 VA-7200-1001 M9116-AGA-2 M12
3/4 in. 7.3 LT 138/153 ---- 289/321 141/156 215/239 345/3451 in. 11.6 NT 86/100 179/209 182/213 88/103 135/158 248/2911 1/4 in. 18.5 PT 52/57 109/120 111/122 54/59 82/90 152/1671 1/2 in. 28.9 RT 34/36 70/74 71/76 34/36 53/56 97/1032 in. 46.2 ST 21/22 45/46 46/47 22/23 34/35 62/64
Notes: [1] Factory-mounted accessories (not available with CGA models): A=Y68AA-1 transformer, 120VAC H=Y68HA-1 transformer, 24VACD=Y68DA-1 transformer, 240VAC Blank=none required
[2] Max closeoff limited in some cases to maximum body rating at 38 psi sat steam (284°F)[3] These items not available factory mounted, but can be field coupled to VG7000 valve bodies using mounting kit. M9116-AGD-2 utilizes a 135 ohm
feedback potentiometer, the M9116-AGE-2 with 1000 ohm feedback pot is also available for field mounting. [4] All electric actuators above have field-reversible action.[5] Any of the three available proportional models can be used with the M120, M140, and M150: GGA for 0-10 VDC, CGA for BAS, or JGA for slidewire,
for field mounting only.[6] M9116-AGC-2 and GGC-2 with 2 auxiliary switches also available factory-mounted. Use actuator subcode 916AGC or 916GGC.
M9200 models and options are limited above to high usage, factory mounted availability. Closeoff pressures listed apply to the basic models, and do not change when using M9124 torque rating or different control signals, voltage, or accessory options on M9200 or M100 Series. Do Not Use The M9108 low torque model because it has insufficient power to compress spring capsule which generates the valve stem force required to provide the maximum closeoff pressures listed above.
Controls Group 507 E. Michigan Street P.O. Box 423, Milwaukee, WI 53202Code No. LIT-1924560
Electric Valve and Actuator Selection Charts (Continued)
VG7000 Series: Non-Spring Return - Brass Trim - Steam, Chilled, or Hot Water (Continued)Example:Factory Assembled
Valve Body Cv Actuator
Complete Assembly VG7241 CS +8020G Example 1(Use Subcode) VG7243 CT +8051G Example 2
For VA-8020-1 an195°F Maximum TeThis actuator is not steam applications.24 VAC Actuator
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond theControls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products.
3/11
d VA-8022-1mperatureto be used for
For VA-8050-1 and VA-8051-1281°F Maximum Temperature
Note: These actuators are not available for field mounting to the VG7000 series valve bodies.
Incremental (Drive Open / Drive Closed) Control Signal [1]
Complete Actuator Code No. VA-8020-1 VA-8050-1
Mounting Kit Code No. none none
Actuator VG7000 subcode +8020G +8050G
Accessory (M1x0) subcode ---- ----
Incremental (Drive Open / Drive Closed) With Feedback [1]
Complete Actuator Code No. Not Available VA-8051-1
Mounting Kit Code No. Not Available none
Actuator VG7000 subcode ---- +8051G
Accessory(M1x0) subcode ---- ----
Proportional Control Signal [1]
Complete Actuator Code No. VA-8122-1
Mounting Kit Code No. none
Actuator VG7000 subcode +8122G
Accessory(M1x0) subcode ----
NPTSize
CvBody Only Code No.
Cv Code
Stem CodeVA-802-x
Maximum Closeoff Pressure (psi) [2]
Stem CodeVA-805x
Maximum Closeoff Pressure (psi) [2]
2-Way Push-Down-To-Close (Factory Mounting Only)
1/2 in.
0.73
VG7241PDTC
C S 284 T 345
1.8 E S 80 T 208
4.6 G S 45 T 118
3/4 in. 7.3 L S 29 T 75
3-Way Mixing (Factory Mounting Only)
1/2 in.
0.73
VG7842Mix
C S 284/381 T 345/345
1.8 E S 80/112 T 208/289
4.6 G S 45/54 T 118/140
3/4 in. 7.3 L S 29/32 T 75/83
Notes: [1]Only the VA-8122 has field reversible action. [2]Max closeoff limited in some cases to maximum body rating at 195°F water for VA-802x series and
Controls Group 507 E. Michigan Street P.O. Box 423, Milwaukee, WI 53202Code No. LIT-1924560
Electric Valve and Actuator Selection Charts (Continued)
VG7000 Series: Spring Return - Stainless Steel Trim - Steam, Chilled, or Hot WaterExample: Valve Body Cv ActuatorFactory AssembledComplete Assembly VG7243 CT +926AGA Example 1(Use Subcode)
Example: Valve Body Cv(Use Complete Component Code No.)Field Assembled
Body only= VG7243 CT
338°F Max100 psig M Satur24 VAC Ac
Example 1:Valve Cast
-1 130
Components: Example 1 Example 2 Example 3Actuator M9216-AGA-2 M130GGA-3 M130AGAMounting Kit M9000-500 VG7000-M110 VG7000-MM1x0 Accessory not available optional Y68AA-1
Incremental (Drive Open / Drive Closed) Control Signal [4]
Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. 4/11
imum Temperatureaximumated Steamtuator
Factory-Assembled Bronze, 2-way PDTC,
NPT, SST Eq% trim, 1/2 in., 0.73 Cv +
Factory mounted M9216-AGA-2Actuator with 24 VAC Supply
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson
Actuator VG7000 subcode +926AGA [6] +946AGA [6] ---- ---- ---- ----Spring to open(up)/close(down) open (up) close (down) open (up) close (down) open (up) close (down)Accessory(M1x0) subcode ---- ---- ---- ---- ---- ----
Proportional Control Signal [4]Complete Actuator Code No. M9216-HGA-2 M9216-HGA-2 M110GGA-3 [3] M110GGA-3 [3] M130GGA-3 [5] M130GGA-3 [5]
Mounting Kit Code No. M9000-500 M9000-500 VG7000-M110 VG7000-M110 VG7000-M130 VG7000-M130Actuator VG7000 subcode +926HGA [6] +946HGA [6] ---- ---- ---- ----Spring to open(up)/close(down) open (up) close (down) open (up) close (down) open (up) close (down)Accessory(M1x0) subcode no. ---- ---- ---- ---- ---- ----
NPTSize
CvBody Only Code No. C
v &
S
tem
C
od
e
Maximum Closeoff Pressure (psi) [2]
2-Way Push-Down-To-Close (Factory And Field Mounting)
4.6 GT 283/308 283/308 51/61 51/61 138/164 138/1643/4 in. 7.3 LT 180/201 180/201 32/36 32/36 88/98 88/981 in. 11.6 NT 114/133 114/133 19/23 21/23 55/64 55/64
1-1/4 in. 18.5 PT 70/76 70/76 12/13 13/13 33/37 33/371-1/2 in. 28.9 RT 45/47 45/47 8/8 8/8 21/23 21/232 in. 46.2 ST 28/30 28/30 5/5 5/5 14/14 14/14
Notes: [1] Factory-mounted accessories (not available for CGA models): A=Y68AA-1 transformer, 120VAC H=Y68HA-1 transformer, 24VACD=Y68DA-1 transformer, 240VAC Blank=none required
[2] Max closeoff limited in some cases to maximum body rating at 100 psi sat steam (338oF).[3] These items not available factory mounted, but can be field coupled to VG7000 valve bodies using mounting kit.[4] All electric actuators above have field-reversible spring and action direction. Note: Incremental plus feedback is available, M9216-AGD-2 utilizes a
135 ohm feedback potentiometer, the M9216-AGE-2 with 1000 ohm feedback pot is also available for field mounting.[5] Any of the three available proportional models can be used with the M110 and M130: GGA for 0-10 VDC, CGA for BAS, or JGA for slidewire,
for field mounting only.[6] M9216-AGC-2 and HGC-2 with two auxiliary switches also available factory-mounted, use actuator subcode 926AGC/HGC or 946AGC/HGC.
M9200 models and options are limited above to high usage, factory mounted availability. Closeoff pressures listed apply to the basic models, and do not change when using M9216 torque rating or different control signals, voltage, or accessory options on M9200 or M100 series.
Controls Group 507 E. Michigan Street P.O. Box 423, Milwaukee, WI 53202Code No. LIT-1924560
Electric Valve and Actuator Selection Charts (Continued)
Example: Valve Body CvField Assembled
VG7000 Series: Spring Return - Brass Trim - Steam, Chilled, or Hot Water Example: Valve Body Cv ActuatorFactory AssembledComplete Assembly VG7241 CT +926AGA Example 1(Use Subcode)
Body only = VG7241 CT (Use Complete Component Code No.)Components: Example 1 Example 2 Example 3Actuator M9216-AGA-2 M110GGA-3 M130AGA-1Mounting Kit M9000-500 VG7000-M110 VG7000-M130M1x0 Accessory not available optional Y68AA-1
Incremental (Drive Open / Drive Closed) Control Signal [4]Complete Actuator Code No. M9216-AGA-2 M9216AGA-2 M110AGA-1 [3] M1
Actuator VG7000 subcode +926AGA [6] +946AGA [6] ---- ---- ---- ----Spring to open (up) / close (down) open (up) close (down) open (up) close (down) open (up) close (down)Accessory (M1x0) subcode ---- ---- ---- ---- ---- ----Proportional Control Signal [4)]
Actuator VG7000 subcode +926HGA [6] +946HGA [6] ---- ---- ---- ----Spring to open (up) / close (down) open (up) close (down) open (up) close (down) open (up) close (down)Accessory (M1x0) subcode ---- ---- ---- ---- ---- ----
NPTSize
CvBody Only Code No. C
v &
S
tem
C
od
e
Maximum Closeoff Pressure (psi) [2]
2-Way Push-Down-To-Close (Factory And Field Mounting)
3/4 in. 7.3 LT 289/321 289/321 52/58 52/58 141/156 141/156
1 in. 11.6 NT 182/213 182/213 31/36 31/36 88/103 88/103
1-1/4 in. 18.5 PT 111/122 111/122 19/21 19/21 54/59 54/59
1-1/2 in. 28.9 RT 71/76 71/76 12/13 12/13 34/36 34/36
2 in. 46.2 ST 46/47 46/47 8/8 8/8 22/23 22/23
Notes:[1] Factory-mounted accessories (not available for CGA models):A=Y68AA-1 transformer, 120VACH=Y68HA-1 transformer, 24VACD=Y68DA-1 transformer, 240VAC Blank=none required.
[2] Max closeoff limited in some cases to maximum body rating at 38 psi sat steam (284°F).[3] These items not available factory mounted, but can be field coupled to VG7000 valve bodies using mounting kit.[4] All electric actuators above have field-reversible spring and action direction. Note: Incremental plus feedback is available, M9216-AGD-2 utilizes a
135 ohm feedback potentiometer, the M9216-AGE-2 with 1000 ohm feedback pot is also available for field mounting.[5] Any of the three available proportional models can be used with the M110 and M130: GGA for 0-10 VDC, CGA for BAS, or JGA for slidewire, for field
mounting only.[6] M9216-AGC-2 and HGC-2 with two auxiliary switches also available factory-mounted, use actuator subcode 926AGC/HGC or 946GGC/HGC.
M9200 models and options are limited above to high usage, factory mounted availability. Closeoff pressures listed apply to the basic models, and do not change when using M9216 torque rating or different control signals, voltage, or accessory options on M9200 or M100 series.
Controls Group 507 E. Michigan Street P.O. Box 423, Milwaukee, WI 53202Code No. LIT-1924560
Electric Valve and Actuator Selection Charts (Continued)
Electrically Actuated 1/2 Inch Flare Valves 1/2 in. Valves Electrically Actuated Maximum Closeoff Pressure (psi) and (Code Number Suffix)
ValveValve BodyCode No. [1]
Style ConnectionMaxCv
VA-812c(AV-802c-)
[2]
VA-805d(AV-805d-)
[2]
VA-715e[2]
av802c.tif av805d.tif va-715x.tif
Flare Valves
VB-3766-1-2-3
PDTC Flare1.01.73.2
150 (1007)150 (1008)150 (1009)
[3]
VB-3966-1-2
PDTO Flare1.82.7
VB-4332-4-5
MX Flare1.5/1.02.3/1.7
[4]100 (1016)100 (1017)
VB-5239-1730-1750-1770
PDTC Flare0.51.22.4
232 (1001)100 (1002)100 (1003)
VB-5839-1730-1750-1770
MX Flare0.51.22.4
232 (1004)100 (1005)100 (1006)
Ordering Information[1] These code numbers are used to order valves without
actuators. See notes 2 and 3 to order valves with electric actuators. Valve bodies can be ordered separately to field mount these electric actuators.
[3] Not available with VA-8052-1(as AV-8052-xxxx)
[2] To order factory-coupled, electric-actuated flare valves, use AV-802c or AV-805d plus desired code number suffix (in parenthesis) from the table.c) 0 = VA-8020-1
2 = VA-8122-1d) 0 = VA-8050-1
1 = VA-8051-1e) 0 = VA-7150-1001
2 = VA-7152-10013 = VA-7153-1001
Example: To order a VB-4332-4 with VA-8051-1 factory-mounted, use Code Number AV-8051-1016 with 100 psi closeoff pressure.
[4] Maximum Closeoff Pressure (psi) and Max Cv (VB-4332)Three-Way Mixing Valve(PDTO Port/PDTC Port)
lect
, Fla
re V
alve
s 1/
2 in
.
Controls Group 507 E. Michigan Street P.O. Box 423, Milwaukee, WI 53202Code No. LIT-1924560
J Series Electric Zone Valve Assemblies - Two-Position On/Off Control
(Standard TemperatureValves Only)
J T 2 2 1 3 w x y z 0 2 0
w Actuator Pressure
G = Standard Closeoff
H =
x Spring Return
1 = Normally Closed
2 = Normally Open
(All Valves)
(Two-Way
y Actuator Temperature
A = 24 VAC, 60 HzB = 120 VAC, 60 Hz
z Voltage
Pressure
High CloseoffPressure
Rating
Valves Only)
Rating3 = Standard Temperature
4 = High Temperature (High TemperatureValves Only)
Electric Valve and Actuator Selection Charts (Continued)
Code Number Ends Style CvTemp
°FCloseoff (psig)
Std. High
1/2 in. Valves
JS2221wxyz020
NPT
2-Way
1.0
250
60 75
JS2222wxyz020 2.5 40 50
JS2223wxyz020 3.5 25 30
JT2221wxyz020 1.0
200
60 75
JT2222wxyz020 2.5 40 50
JT2223wxyz020 3.5 25 30
JS3223wxyz0203-Way 4.0
25025 30
JT3223wxyz020 200
JS2211wxyz020
Sweat
2-Way
1.0
250
60 75
JS2212wxyz020 2.5 40 50
JS2213wxyz020 3.5 25 30
JT2211wxyz020 1.0
200
60 75
JT2212wxyz020 2.5 40 50
JT2213wxyz020 3.5 25 30
JS3213wxyz0203-Way 4.0
25025 30
JT3213wxyz020 200
3/4 in. Valves
JS2343wxyz020
Flare
2-Way 3.5250
25 30JT2343wxyz020 200
JS3343wxyz0203-Way 4.0
250
JT3343wxyz020 200
JS2322wxyz020
NPT
2-Way
2.5 250 40 50
JS2323wxyz020 3.5 250 25 30
JT2322wxyz020 2.5 200 40 50
JT2323wxyz020 3.5 200 25 30
JS3325wxyz0203-Way 5.0
25020 25
JT3325wxyz020 200
JS2312wxyz020
Sweat
2-Way
2.5 250 40 50
JS2313wxyz020 3.5 250 25 30
JT2312wxyz020 2.5 200 40 50
JT2313wxyz020 3.5 200 25 30
JS3315wxyz0203-Way 5.0
25020 25
JT3315wxyz020 200
The performance specifications are nominal and conform to acceptable industry standaControls office. Johnson Controls, Inc. shall not be liable for damages resulting from mi
7
Inverted Flare Fittings (Order Separately)
1 in. Valves
JS2427wxyz020
NPT
2-Way
8.0
250
17 20
JT2427wxyz020 200
JS3427wxyz0203-Way
250
JT3427wxyz020 200
JS2417wxyz020
Sweat
2-Way250
JT2417wxyz020 200
JS3417wxyz0203-Way
250
JT3417wxyz020 200
1-1/4 in. Valves
JS2517wxyz020
Sweat
2-Way
8.0
250
17 20JT2517wxyz020 200
JS3517wxyz0203-Way
250
JT3517wxyz020 200
Code No. Description
J647-601 For 1/2 in. (5/8 in. O.D.) Copper Tubing, 5/16 in.
J647-602 For 1/2 in. (5/8 in. O.D.) Copper Tubing, 1-11/16 in.
J647-603 For 1/2 in. (5/8 in. O.D.) Copper Tubing, 3 in.
J647-604 For 3/4 in. (7/8 in. O.D.) Copper Tubing, 1-27/32 in.
J647-605 For 1/2 in. (5/8 in. O.D.) Copper Tubing, 1-15/16 in.
J647-606 For 1 in. (1-1/8 in. O.D.) Copper Tubing, 2-3/8 in.
Controls Group 507 E. Michigan Street P.O. Box 423, Milwaukee, WI 53202Code No. LIT-1924560
WARcross ref mark
Electric Valve and Actuator Selection Charts (Continued)
NING!
VA-3100/VA-6100 Series Electrically Actuated
M100 Series Electrically Actuated 2-1/2 through 4 in. Iron Globe Valves
M100 Series Electrically Actuated Valves
Maximum Closeoff Pressure (psig)
Val
ve B
od
y C
od
e N
o.
[1]
Siz
e (i
n.)
Sty
le
Co
nn
ecti
on
Max
. Cv
M12
0/13
0Y
20E
BD
-1M
120/
130
Y20
EB
D-6
M14
0Y
20E
BD
-2M
150
Y20
EB
D-3
M15
0Y
20E
BD
-4
VG2231TM 2-1/2PDTC
Flanged(ANSI
Class 125)
51 7 12 22 46 28
VG2231UM 3 83 --- 7 14 32 18
VG2231VM 4 150 --- --- 6 18 9
VG2431TM 2-1/2
PDTO
54 7 12 22 46 28
VG2431UM 3 83 --- 7 14 32 18
VG2431VM 4 150 --- --- 6 18 9
VG2831TM 2-1/2
MIX
54 7 12 22 28 26
VG2831UM 3 80 --- 7 14 19 18
VG2831VM 4 157 --- --- 6 11 9
The performance specifications are nominal and conformControls office. Johnson Controls, Inc. shall not be liable for damages resulting from mi
9
M9000 Series Electrically Actuated 2-1/2 through 6 In. Cast Iron Flanged Globe Valves
Note: Connection: Flanged (ANSI Class 125)
Mounting Kits for Field Mounting M9000 Series Electric Actuators
M9100 Series Electrically Actuated Valves
Maximum Closeoff Pressure (psig)
Non-Spring Return
Spring Return
Val
ve B
od
yC
od
e N
o.
Siz
e (i
n.)
Ste
m D
ia. (
in.)
Max
. Cv
M91
16-x
Gx-
2(S
ing
le A
ctu
ato
r)
M91
24-x
Gx-
2(S
ing
le A
ctu
ato
r)
M91
24-x
Gx-
2(T
wo
Act
uat
ors
)
M92
16-x
Gx-
2(S
ing
le A
ctu
ato
r)
M92
16-x
Gx-
2(T
wo
Act
uat
ors
)
Two-Way (Push-Down-to-Close)
VG2231TM 2-1/2 3/8 51 62 101 --- 47 ---
VG2231UM 3 3/8 83 27 43 88 20 41
VG2231VM 4 3/8 150 --- 24 49 --- 23
VG2231WN 5 1/2 240 --- --- 26 --- 12
VG2231YN 6 1/2 350 --- --- 16 --- ---
Two-Way (Push-Down-to-Open)
VG2431TM 2-1/2 3/8 54 62 101 --- 47 ---
VG2431UM 3 3/8 83 27 43 88 20 41
VG2431VM 4 3/8 150 --- 24 49 --- 23
VG2431WN 5 1/2 237 --- --- 26 --- 12
VG2431YN 6 1/2 344 --- --- 16 --- ---
Three-Way Mixing
VG2831TM 2-1/2 3/8 54 37 60 --- 28 ---
VG2831UM 3 3/8 80 16 26 53 12 24
VG2831VM 4 3/8 157 9 14 30 6 14
VG2831WN 5 1/2 238 --- 7 15 --- 7
VG2831YN 6 1/2 347 --- 4 9 --- 4
Mounting Kit Code Number
Valve Size (in.)
Stroke Length
Valve Stem Type(Diameter in.)
Number of Actuators
M9000-530 2-1/2 7/8“M” (3/8)
OneM9000-531
3 and 4 1-1/8M9000-532 Two
M9000-5335 1-3/8
“N” (1/2)
One
M9000-534 Two
M9000-5356 1-1/2
One
M9000-536Two
M9000-537 3 and 4 1-1/8
2-1/2 through 6 in. Iron Globe ValvesVA-3100/VA-6100 Series
Electrically Actuated ValvesMaximum Closeoff
Pressure (psig)
Val
ve B
od
y C
od
e N
o.
[1]
Siz
e (i
n.)
Ste
m D
ia.
Sty
le
Co
nn
ecti
on
Max
. Cv
VA
-310
0-xG
xV
A-3
100-
500
VA
-310
0-xG
xV
A-3
100-
501
VA
-610
0-xG
CV
A-3
100-
501
VG2231TM 2-1/2 3/8
PDTC
Flanged(ANSIClass 125)
51 115 --- ---
VG2231UM 3 3/8 83 79 --- ---
VG2231VM 4 3/8 150 45 --- ---
VG2231VN 4 1/2 150 --- --- 89
VG2231WN 5 1/2 240 --- 29 57
VG2231YN 6 1/2 350 --- 20 40
VG2431TM 2-1/2 3/8
PDTO
54 115 --- ---
VG2431UM 3 3/8 83 79 --- ---
VG2431VM 4 3/8 150 45 --- ---
VG2431VN 4 1/2 150 --- --- 89
VG2431WN 5 1/2 237 --- 29 57
VG2431YN 6 1/2 344 --- 20 40
VG2831TM 2-1/2 3/8
MIX
54 69 --- ---
VG2831UM 3 3/8 80 48 --- ---
VG2831VM 4 3/8 157 27 --- ---
VG2831VN 4 1/2 157 --- --- 54
VG2831WN 5 1/2 238 --- 17 34
VG2831YN 6 1/2 347 --- 12 24
Note [1] These code numbers are used to order valves without actuators for field mounting. Refer to VG2x31 Series Electric Cast Iron Flanged Globe Valves for available factory-coupled combinations.
Electric Non-Spring Return Electric Non-Spring Return
Modulating 4-20 mA (a) Two-Position
Modulating 4-20 mA (a)
(a) 0-10 VDC available upon special request
Two-Position
2 144 -701 -721
2-1/2 282 -701 -721
3 461 -701 -721
4 841 -702 -722 -701 -721
5 1376 -703 -723 -702 -722
6 1850 -703 -723 -703 -723
8 3316 -705 -725 -703 -723
10 5430 -707 -727 -705 -725
12 8077 -708 -728 -706 -726
14 10538 -708 -728 -707 -727
16 13966 -907 -927 -707 -727
18 17214 -908 -928 -708 -728
20 22339 -908 -928 -907 -927
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyonControls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products.
10/11
Example: Use code number VFF-100HA-727N to order a 10 inch, three-way, style F, high closeoff pressure (175 psi) butterfly valve featuring a phosphatized, carbon steel stem and an electric two-position actuator.
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these sControls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products.