ELECTRIC SUBMERSIBLE MOTORS
ELECTRIC SUBMERSIBLE
MOTORS
Basic Features:
• NEMA 4" connection or available with custom connection
• Corrosion-resistant construction
• Hardened stainless steel splined shaft
• Advanced Power-Dense 24-slot stator to maximize available horsepower per linear inch of motor length
• Anti-track self-healing resin system
• Hermetically-sealed windings
• Water lubricated bearings
• Filter check valve
• Kingsbury-type thrust bearing rated for 5-10 hp, 1,500 lbs and 15 hp, 3,500 lbs downthrust
• Pressure equalizing diaphragm
• Removable Water-Bloc™ lead
• NEMA pump mounting dimensions
• Reinforced diaphragm housing
• Protective filter shield
• UL 778 recognized
• CSA C22.2 #108 certified
4" CBM+SUBMERSIBLE MOTORS
Applications:Franklin Electric’s CBM+ motors are built for superior dependability in 4” diameter or larger low-producing coalbed methane wells. Rated for continuous operation in 122 °F (50 °C) water at ¼ ft. per second and 176 °F (80 °C) water at 1’ per second flow past the motor. The CBM+ motor can be used in ESP applications as well as ESPCP applications with the use of a Franklin Electric engineered control.
5-15 hp, 460/380 Volts - 60/50 Hz
CBM+ Motor Features:
• Exclusive Sand Fighter™ sealing system
• Increased bearing capacity
• Can handle up to 10% hydrocarbon liquids
Model Availability
Three-Phase (Special Control Required)
OrderNumber HP KW
Length (L) Shipping Weight
In mm lbs kg2347273529G 5 3.7 23.45 596 52 24
2347283529G 7.5 5.5 28.37 721 66 30
2347293529G 10 7.5 31.44 799 74 34
2346268995 15 11.2 47.5 1,206 115 52.3
4" CBM+SUBMERSIBLE MOTORS5-15 hp, 460/380 Volts - 60/50 Hz
Materials of Construction
Component Material
Top Casting 300 Series stainless steel
Bottom Casting 300 Series stainless steel
Stator Shell 300 Series stainless steel
Stator Ends 300 Series stainless steel
Shaft Extensions 17-4 stainless steel
Fasteners 300 Series stainless steel
Seal Cover 300 Series stainless steel
Seal Sand Fighter™ SiC/SiC mechanical seal
Diaphragm FPM/FKM
Diaphragm Cup 300 Series stainless steel
Diaphragm Spring 300 Series stainless steel
Diaphragm Cover CF8M investment casting 316 stainless steel
Slinger FPM/FKM
Lead Wire (or Cable) Hydrocarbon resistant lead
Lead Potting Epoxy
Lead Screws/Clamp 300 Series stainless steel
Filter 300 stainless steel plug
Diaphragm Filter Acetal and polyester
1.48 MAX 0.50 MIN
FULL SPLINE
0.161 MAX LEADBOSS HEIGHT
0.030 RMAX
1.508 1.498
3.75 DIA“L”
SEE TABLE
0.91 1.09
Basic Features:
• Corrosion-resistant construction
• Hardened stainless steel splined shaft
• Advanced Power-Dense 24-slot stator to maximize available horsepower per linear inch of motor length
• Anti-track self-healing resin system
• Hermetically-sealed windings
• Water lubricated bearings
• Kingsbury-type thrust bearing rated for 5 - 10 Hp - 1,500 downthrust
• Pressure equalizing diaphragm
• Removable Water-Bloc™ lead
• NEMA pump mounting dimensions
• UL 778 recognized
• CSA C22.2 #108 certified
4" OIL STRIPPERSUBMERSIBLE MOTORS
Applications:Franklin Electric’s Oil Stripper motors are built for superior dependability in 4” diameter or larger oil stripper wells. Rated for continuous operation in 176 °F (80 °C) water at 1 ft. per second and 122 °F/ 50 °C water at 1/4 ft. per second flow past the motor. The rotation is electrically reversible.
5-10 Hp, 460/380 Volts - 60/50 Hz
Oil Stripper Motor Features:
• Exclusive Sand Fighter™ sealing system
• Increased bearing capacity
• Increased temperature rating
• Can handle up to 10% hydrocarbon liquids
Model Availability
Three-Phase (Special Control Required)
OrderNumber HP KW
Length (L) Shipping Weight
In mm lbs kg2347278702G 5 3.7 22.98 584 51 23
2347288702G 7.5 5.5 27.9 709 65 30
2347298702G 10 7.5 30.97 787 73 33
Materials of Construction
Component Material
Top Casting 300 Series stainless steel
Bottom Casting 300 Series stainless steel
Stator Shell 300 Series stainless steel
Stator Ends 300 Series stainless steel
Shaft Extensions 17-4 stainless steel
Fasteners 300 Series stainless steel
Seal Cover 300 Series stainless steel
Seal Sand Fighter™ SiC/SiC mechanical seal
Diaphragm FPM/FKM
Diaphragm Cup 300 Series stainless steel
Diaphragm Spring 300 Series stainless steel
Diaphragm Cover 300 Series stainless steel
Slinger FPM/FKM
Lead Wire (or Cable) Nitrile rubber
Lead Potting Epoxy
Lead Screws/Clamp 300 Series stainless steel
Filter 300 stainless steel plug
1.48 MAX 0.50 MIN
FULL SPLINE
0.161 MAX LEADBOSS HEIGHT
0.030 RMAX
1.508 1.498
3.75 DIA“L”
SEE TABLE
0.91 1.09
4" OIL STRIPPERSUBMERSIBLE MOTORS5-10 Hp, 460/380 Volts - 60/50 Hz
Basic Features:
• Corrosion-resistant construction
• Stainless steel splined shaft
• Advanced Power-Dense 24-slot stator to maximize available horsepower per linear inch of motor length
• Hermetically-sealed windings
• Anti-track self-healing resin system
• Water lubricated bearings
• Filter check valve
• Kingsbury-type thrust bearing rated for 1,500 lbs. downthrust
• Pressure equalizing diaphragm
• Removable Water-Bloc™ lead (sold separately)
• NEMA pump mounting dimensions
• UL 778 recognized
• Can handle up to 10% oil-can
4" ENERGY SERVICESUBMERSIBLE MOTORS
Applications:Franklin Electric’s Energy Service motors are built for superior dependability in 4” diameter or larger water well casing with little to no hydrocarbons and heavy abrasives. Rated for continuous operation in 86 °F (30 °C) water at ¼ ft. per second flow past the motor. The rotation is electrically reversible.
Three-Phase 5-10 Hp, 460/380 Volts - 60/50 Hz
Model Availability
Three-Phase (Special Control Required)
OrderNumber HP KW
Length (L) Shipping Weight
In mm lbs kg2347278801G 5 3.7 22.49 571 50 23
2347288801G 7.5 5.5 27.41 696 64 29
2347298801G 10 7.5 30.48 774 72 33
Materials of Construction
Component Material
Top Casting 300 Series stainless steel
Bottom Casting 300 Series stainless steel over painted cast iron
Stator Shell 300 Series stainless steel
Stator Ends Low carbon steel
Shaft Extensions 17-4 stainless steel
Fasteners 300 Series stainless steel
Seal Cover Sintered bronze
Seal SiC/SiC mechanical seal
Diaphragm Nitrile rubber
Diaphragm Cup 300 Series stainless steel
Diaphragm Spring 300 Series stainless steel
Diaphragm Cover 300 Series stainless steel
Slinger FPM/FKM
Lead Wire (or Cable) Not Included
Filter 300 Series stainless steel plug
1.48 MAX 0.50 MIN
FULL SPLINE
0.161 MAX LEADBOSS HEIGHT
0.030 RMAX
1.508 1.498
3.75 DIA“L”
SEE TABLE
0.91 1.09
4" ENERGY SERVICESUBMERSIBLE MOTORSThree-Phase 5-10 Hp, 460/380 Volts - 60/50 Hz
Note: 60 Hz - 3,450 RPM and 50 Hz - 2,875 RPM
LEADS
Model Lead Type Lead Wire Insulation
Lead Length in/m
Design PressurePSI/Bar
LeadPotting
LeadScrews/Clamp
WellTemperature Well Fluid
152735953 Standard XLPE 240 in/6m 500 PSI - 34.5 Bar Epoxy316
StainlessSteel
86˚F (30˚C)Water - Minimal
HydrocarbonLiquids
3103865026 CBM+ Orange Polyurethane 97 in/2.5m 1000 PSI - 69 Bar Epoxy
316Stainless
Steel122˚F (50˚C)
Water - upto 10% oil-cut
- corrosive
152744904 Oil-Stripper Nitrile - NoGround Wire 156 in/4m 500 PSI - 34.5 Bar Epoxy
316Stainless
Steel176˚F (80˚C)
Water - upto 10% oil-cut
- corrosive
305978901 High Pressire Nitrile - XLPEGround Wire 156 in/4m 2200 PSI - 152 Bar Epoxy
316Stainless
Steel176˚F (80˚C)
Water - upto 10% oil-cut
- corrosive
AL-0014 5-20
USA - Artificial LiftFranklin Electric - Headquarters9255 Coverdale Road, Fort Wayne, IN 46809Tel: 1.888.885.9248
www.franklin-energy.com
China - Artificial LiftFranklin Electric - ShanghaiUnit 1002-03 Shanghai Centra PlazaNo 227, Huang Pi Bei RoadShanghai, 200003, CHINATel: 86-21-6327-0909
Franklin Electric - South AfricaFrankline Electric (Pty) Ltd.13 Engwena RoadSebenzaEdenvale 1610Republic of South Africa
PO Box 8136Edenglen1613Republic of South Africa
E-mail: [email protected]: +27 11 723 6500Fax: +27 11 609 2417
Australia - Artificial LiftFranklin Electric (Australia) Pty. Ltd.106 - 110 Micro CircuitDandenong South, Victoria 3175AustraliaTel: +61.3.9799.5000
Franklin Electric - BeijingA802 ChaoWaimen CenterNo 26 Chaowai StChaoyang DistrictBeijing 100020 CHINATel: +86-10-8565-4566
CONTACT US