Top Banner
Model: SE2C3 115V 1P Gorman-Rupp electric submersible pumps are designed for dewatering where solids are not a concern – whether it is a flooded basement, a pool, spa, pond, or pit, or anywhere else where the pump can be lowered into the water. Built with a 49-foot power cord and a barbed discharge connection, these pumps are ready to go to work. Cast iron construction and mechanical seals mean they are built to last. Models are available with optional built-in level controls for automatic on/off operation. GENERAL INFORMATION Model Description Ship Wt. (Approx.) Driver Type (HP) Max. Solids Dis. (NPT) Basic Construction Seal Type & Elastomer/Faces VAC 60 Hz Phase Amps Motor Housing (RPM) SE1 1/2A3 115V 1P Submersible 42 lbs. Electric Motor (1/3) 1/4" (6 mm) 1-1/2" Cast Iron Buna-N Carbon/Ceramic 115 1 4.8 Cast Iron (3450) SE1 1/2A3A 115V 1P Submersible Auto-start 42 lbs. Electric Motor (1/3) 1/4" (6 mm) 1-1/2" Cast Iron Buna-N Carbon/Ceramic 115 1 4.8 Cast Iron (3450) SE2C3 115V 1P Submersible 52 lbs. Electric Motor (1/2) 1/4" (6 mm) 2" Cast Iron Buna-N Carbon/Ceramic 115 1 6.8 Cast Iron (3470) SE2C3A 115V 1P Submersible Auto-start 52 lbs. Electric Motor (1/2) 1/4" (6 mm) 2" Cast Iron Buna-N Carbon/Ceramic 115 1 6.8 Cast Iron (3470) SE2D3 115V 1P Submersible 78 lbs. Electric Motor (1) 1/4" (6 mm) 2" Cast Iron Buna-N Bronze/Steel 115 1 9.0 Cast Iron (3450) SE2D3A 115V 1P Submersible Auto-start 78 lbs. Electric Motor (1) 1/4" (6 mm) 2" Cast Iron Buna-N Bronze/Steel 115 1 9.0 Cast Iron (3450) FEATURES n Cast iron construction n Built-in carry handle n Motors are 115 VAC, single phase and include a 49 ft. (14,9 m) power cord n Thermal overload protected n Built-in stainless steel strainer n Maximum liquid temperature 122º F (50º C) n Optional level control (for manual models) n Buna-N mechanical seal with carbon and ceramic faces (SE2C3, SE1 1/2A3) n Buna-N mechanical seal with bronze and steel faces (SE2D3 only) n Available with auto-start/stop (see description) n 49 ft. (14,9 m) nylon lifting rope included n Barbed hose connector O35-0020 WARNING! Do not use in explosive atmosphere or for pumping volatile flammable liquids. ELECTRIC SUBMERSIBLE PUMPS REVISED: 11/2011
2

ELECTRIC SuBMERSIBLE PuMPS - Westech Equipment - The Pump ... .3 to 1 HP... · Model: SE2C3 115V 1P Gorman-Rupp electric submersible pumps are designed for dewatering where solids

Aug 25, 2018

Download

Documents

hoangduong
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: ELECTRIC SuBMERSIBLE PuMPS - Westech Equipment - The Pump ... .3 to 1 HP... · Model: SE2C3 115V 1P Gorman-Rupp electric submersible pumps are designed for dewatering where solids

Model: SE2C3 115V 1P

Gorman-Rupp electric submersible pumps are designed for dewatering where solids are not a concern – whether it is a flooded basement, a pool, spa, pond, or pit, or anywhere else where the pump can be lowered into the water. Built with a 49-foot power cord and a barbed discharge connection, these pumps are ready to go to work. Cast iron construction and mechanical seals mean they are built to last. Models are available with optional built-in level controls for automatic on/off operation.

GENERAL INFORMATION

Model Description Ship Wt. (Approx.)

Driver Type (HP)

Max. Solids

Dis. (NPT)

Basic Construction

Seal Type & Elastomer/Faces

VAC 60 Hz Phase Amps Motor

Housing (RPM)

SE1 1/2A3 115V 1P Submersible 42 lbs. Electric Motor (1/3) 1/4" (6 mm) 1-1/2" Cast Iron Buna-N Carbon/Ceramic 115 1 4.8 Cast Iron (3450)

SE1 1/2A3A 115V 1P Submersible Auto-start 42 lbs. Electric Motor

(1/3) 1/4" (6 mm) 1-1/2" Cast Iron Buna-N Carbon/Ceramic 115 1 4.8 Cast Iron (3450)

SE2C3 115V 1P Submersible 52 lbs. Electric Motor (1/2) 1/4" (6 mm) 2" Cast Iron Buna-N Carbon/Ceramic 115 1 6.8 Cast Iron (3470)

SE2C3A 115V 1P Submersible Auto-start 52 lbs. Electric Motor

(1/2) 1/4" (6 mm) 2" Cast Iron Buna-N Carbon/Ceramic 115 1 6.8 Cast Iron (3470)

SE2D3 115V 1P Submersible 78 lbs. Electric Motor (1) 1/4" (6 mm) 2" Cast Iron Buna-N Bronze/Steel 115 1 9.0 Cast Iron (3450)

SE2D3A 115V 1P Submersible Auto-start 78 lbs. Electric Motor

(1) 1/4" (6 mm) 2" Cast Iron Buna-N Bronze/Steel 115 1 9.0 Cast Iron (3450)

FEATuRESn Cast iron construction n Built-in carry handlen Motors are 115 VAC, single phase and include a 49 ft. (14,9 m) power cordn Thermal overload protectedn Built-in stainless steel strainer n Maximum liquid temperature

122º F (50º C)

n Optional level control (for manual models)n Buna-N mechanical seal with carbon and ceramic faces (SE2C3, SE1 1/2A3)n Buna-N mechanical seal with bronze and steel faces (SE2D3 only)n Available with auto-start/stop (see description)n 49 ft. (14,9 m) nylon lifting rope includedn Barbed hose connector

O35-0020

WARNING!Do not use in explosive atmosphere or for pumping volatile flammable liquids.

ELECTRIC SuBMERSIBLE PuMPS

REVISED: 11/2011

Page 2: ELECTRIC SuBMERSIBLE PuMPS - Westech Equipment - The Pump ... .3 to 1 HP... · Model: SE2C3 115V 1P Gorman-Rupp electric submersible pumps are designed for dewatering where solids

PuMP d IMENSIONAL dATA

Model A B C D E – Turn-Off Level

F – Turn-On Level Discharge* Cable Length

SE1 1/2A3 115V 1P9.19 16.81 4.21 6.30

N/A N/A 1.50 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00)

SE1 1/2A3A 115V 1P9.19 16.81 4.21 6.30 4.82 12.97

1.50 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00) (122,50) (329,50)

SE2C3 115V 1P9.19 16.81 4.21 6.30

N/A N/A 2.00 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00)

SE2C3A 115V 1P9.19 16.81 4.21 6.30 4.82 12.97

2.00 49 ft./(15,0 m)(233,50) (427,10) (107,00) (160,00) (122,50) (329,50)

SE2D3 115V 1P10.12 20.93 4.29 7.09

N/A N/A 2.00 49 ft./(15,0 m)(257,00) (531,50) (109,00) (180,00)

SE2D3A 115V 1P10.12 20.93 4.29 7.09 4.82 12.97

2.00 49 ft./(15,0 m)(257,00) (531,50) (109,00) (180,00) (122,50) (329,50)

INCHES (MILLIMETERS)

©2011 The Gorman-Rupp Company. The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation.

ELECTRIC SuBMERSIBLE PuMPS

SE

SE

RIE

S

Curves are based on a speci�c gravity of 1.0U.S. GALLONS PER MINUTE (LITERS PER SECOND)

TOTA

L HE

AD IN

FEE

T (M

ETER

S)*

*To convert to PSI divide by 2.31

0 10 (0,6)

20 (1,3)

30 (1,9)

40 (2,5)

50 (3,1)

60 (3,8)

70 (4,4)

80 (5,0)

90 (5,7)

100

(6,3)

110

(6,9)

100(30,5)

90(27,4)

80(24,4)

70(21,3)

60(18,3)

50(15,2)

40(12,2)

30(9,1)

20(6,1)

10(3,0)

0

SE1 1/2A3 115V 1PSE1 1/2A3A 115V 1PSE2C3 115V 1PSE2C3A 115V 1P

SE2D3 115V 1PSE2D3A 115V 1P

PERFORMANCE CuRVES

MOdEL: SE2C3A 115V 1P

A

B

C

D

E

F

DISCHARGE

*Standard NPT Pipe Threads

O35-0020