ELECTRIC ELECTRONIC LABORATORY SAMAR

ELECTRIC ELECTRONIC LABORATORY

SAMAR

Via della pace n. 25 Fr. Zivido 20098 San Giuliano Milanese

Tel: +39 0298242255 Fax: +39 02 98242279

e-mail: [email protected] certified e-mail: [email protected]

web: www.samar-instruments.it online catalogue: www.samarinternet.com

Design & Project & Production & Trading of Industrial and Educational Instruments and Equipments

SAMAR s.r.l. Web: www.samar-instruments.it Via della Pace n. 25 Fr. Zivido - 20098 San Giuliano Milanese - Milano – Italy Tel.: (++39) 02 98242255 (r.a.) Fax:(++39) 02 98242279 E-mail: [email protected]

PEC: [email protected] CATALOGO ON LINE: www.samarinternet.com

Ver 04.15

WORKBENCH see dedicated catalog

TYPE TU200 The workbench is suitable to satisfy the laboratory requests in the various sectors of the school. • Standard dimensions mm 2000x1000x900h (ON DEMAND: other dimensions). • Tubular structures mm 40x40x2 • Wooden plane covered on both sides in plastic laminated with anti-scratch work plane. • Rounded corners bordered in rubber • Feet adjustable by screw • Painting with epoxy thermo-hardening dust and phospho-degreasing treatment (the bench is

guaranteed against scratch and rust). Availability of a wide range of options afterwards described that increases the versatility of the desk. Adaptability to the various requests of the user.

OPTIONS FOR THE WORKBENCH • DRAWERS: mounted under the worktop, single or double, side by side or as a chest of drawers. Handle and lock included. • UNDER-POWER: powers mounted under the worktop on the short or long side of the bench including wide range of accessories. • UP-POWER: powers mounted on the worktop on the short or long

side of the bench (in this last case put side by side or single ) including wide range of accessories.

• SUPPORT PLACE: suitable to lodge instruments including wide range of accessories. Placed on the worktop on the short or long side of the bench.

• POWER SUPPLY: several models are available. See the relevant leaflet for detailed descriptions

• KEYBOARD HOLDER: extractable keyboard placed under the worktop to lodge keyboard and mouse • PC TOWER SUPPORT: for PC tower to be fixed under the worktop

OPZIONI:




Ver 04.15

DESKTOP POWER SUPPLY

MULTIFUNCTION SINGLE-THREE PHASE POWER SUPPLY TYPE RZ01 Designed to be used in laboratory and for supplying fixed and variable d.c. and a.c. feedings necessary to make experiences. Complete of all safety devices established by Standards. Supplied with a certification that declares quality and compliance with EN61010 Standard. Built in metal case with frontal panel having a clear synoptic of the various functions. Painting according to standards of security and good quality. Guaranteed against rust and scratches. The turret can be opened at the rear and at front in order to make inspections and maintenance . Terminals according to safety rules 4 mm protected against casual contacts. Dimensions: 1000x400x350 mm

Feeding 400 V three-phase + N + PE 50 Hz (ON DEMAND: different power supply) ON DEMAND: additional securities: coverings in polycarbonate of the frontal side. GENERAL CHARACTERISTICS SAFETY SECTION: • Emergency mushroom button • Automatic residual current circuit breaker • Starting Key • Signal lamp • Protection fuses at OUTPUT SECTION (on request magnetothermic)

OUTPUTS • 3 fixed universal single-phase outlets 220 V 10/16 A • 1 three-phase fixed outlet + N + T 380 V (on request, different configuration ) • 1 adjustable three-phase output 0– 500 V / 5A • 1 adjustable single-phase output 0 – 250 V / 5 A· • 1 adjustable d.c. rectified output 0 – 250 V / 5 A • 1 stabilized adjustable power supply 0 – 30 V / 0 – 5 A ( ON REQUEST: different outputs or dual version, three-outputs and so on )

Complete of:· • Digital instrument 3 ½ digits that indicates d.c. rectified output voltage • Digital instruments 3 ½ digits that indicate voltage and current supplied by stabilized power supply· • Digital instruments 3 ½ digits that indicate single-phase and three-phase output voltage selected by switch. Switch to select single-phase or three-

phase output.

POWER SUPPLY SERIES A0240 FOR ELECTRICAL MACHINES – POWER 200W or 1KW or 3KW (on request other powers) Designed to be used in electrical laboratory for supplying fixed and variable d.c. and a.c. feedings necessary to make experiences. Complete of all safety devices established by standards. Supplied with a certification that declares quality and compliance with EN61010 Standard. Built in metal case with frontal panel having a clear synoptic of the various functions. Painting according to Standards of security and good quality. Guaranteed against rust and scratches. The turret can be opened at the rear and at front in order to make inspections and maintenance . Terminals according to safety rules 4 mm protected against casual contacts. General and outputs protections guarantee the user and the unit against misuse and/or faulty operation. A.c. and d.c. outputs are variable with continuity and the values of current and voltage are suitable for machines under test. Each output is equipped with digital instrument. Terminals according to safety rules.

Dimensions: 1000x400x350 mm Feeding 400 V three-phase + N + PE 50 Hz (ON DEMAND: different power supply) ON DEMAND: additional securities: coverings in polycarbonate of the frontal side. GENERAL CHARACTERISTICS SAFETY SECTION: Emergency mushroom button Automatic residual current circuit breaker Starting Key Signal lamp OUTPUTS POWER: available version 200W or 1KW or 3KW (on request other powers) Three-phase adjustable output: 0-440 V/0-250 V a.c. (current depends on the power you choose) Single-phase adjustable output: 0-220 V a.c./d.c. (current depends on the power you choose) Single-phase adjustable output: 0-220 V d.c./1 A (current depends on the power you choose) Three-phase fixed output 380 V 13 A with EEC plug N. 2 Single-phase fixed output 220 V 16 A with Shuko plug or universal type differential magnetothermic protection high sensitivity 4 x 20 mA button, terminals according to safety rules interconnected by means of a synoptic, measuring instruments on the outputs and protection of max speed rotation of motors. Complete of: • Switch to select single-phase or three-phase output. Different three-phase output voltage selected by switch. • Start/stop button • Signal lamp • • Digital instruments 3 ½ digits that indicate voltage and current single-phase and three-phase output selected by switch. Magnetothermic protection for

a.c. line and d.c. line • Digital instruments 3 ½ digits that indicates d.c. rectified output voltage and current, protection with magnetothermic protection




Ver 04.15

Programmable power supplies Type VAE/1 (code 1385) and VAE/2 (code 1386) They allow regulating the test voltage controlled from PC ensuring such a perfect linearity for a better optimisation of tests. Each model includes two three-phase variacs with adjustable separately outputs single-phase and three-phase voltages in d.c. and a.c. and driven by motors through RS232 of PC . Possibilities of local control by buttons. Included two digital instruments 3 ½ digits for the reading of the supplied voltage, two insulation transformers for separation of the output voltage and switch to reduce the output voltage to 1/10 of the nominal voltage. Power supplies 3x380 V. Provided with safety devices. Dimensions: 800x600x1000 mm. Weight 120 or 170 kg approx according to the model: VAE/1 1200 VA for output (total 2400 VA) VAE/2 3200 VA for output (total 6400 VA). For both models: adjustable output dc voltage from 0 to 250 V; adjustable three phase output voltage from 0 to 400 V with possibility of single-phase use; on request other output voltage or powers. On request also not programmable versions.

POWER SUPPLY SERIES PULP Designed to be used in laboratory and for supplying fixed and variable d.c. and a.c. feedings necessary to make experiences. Complete of all safety devices established by standards. Supplied with a certification that declares quality and compliance with EN61010 standard. Built in metal case with frontal panel having a synoptic light of the various functions. Painting according to standards of security and good quality. Guaranteed against rust and scratches. At your choice

- Single-phase fixed output 220 V 16 A with Shuko plug or universal type - Three-phase fixed output 380 V 13 A with EEC plug or terminals - Automatic residual current circuit breaker - Starting Key - Signal lamp - Emergency mushroom button - Three-phase adjustable output - Single-phase adjustable output - d.c. adjustable output - protection by fuse or magnetothermic

On request customized versions

The power supplies can include the following solutions to be combined with pleasure: - Safety: differential thermal breaker, push-button, key consent, ON / OFF switch, mains detection ... .. - Fixed outputs single-phase and / or three phase different ranges - Variable and continuously adjustable outputs three-phase 0-500V / power to define - Variable and continuously adjustable outputs single-phase 0-250V / power to define - Variable and continuously adjustable dc 0 - 250V / power to define - Outputs stabilized single, dual, triple various ranger - Cover anti-vandalism protect computer tools etc ....

PULP/XX – Small size and low cost

suggerita per macchine elettriche

CON PLC

suggerita per macchine elettriche

polivalente

torrettine per tutti gli usi




Ver 04.15

CHAIRS – STOOLS swivel stools and chairs

5-pronged Swivels

Adjustable Height can be adjusted by using a pneumatic gas lift They are also available with casters

TROLLEY

CABINET available with wheels

con e senza poggiapiedi With

or without footrest polyurethane type

With or without footrest

polyurethane type

With or without footrest

polyurethane type

version for coupling electric

motors




Ver 04.15

WORKSTATION FOR ELECTRICAL INSTALLATIONS AND/ OR PNEUMATIC AND ELETTRO-PNEUMATIC

see dedicated catalog

ACCESSORIES LABORATORY'S CABLES (suitable security rules) + RACK FOR CABLES

AVAILABLE COLOURS: red, black, yellow, green, yellow-green, blue LENGTHS: 25 - 50 - 100 - 150 - 200 cm WORKING VOLTAGE: 1000 V CAT III TEST : 7400 Vrms lasted 1 minute TRACTION: 150 N CURRENTS: versions from 16 - 20 - 30 A (on request other versions) CABLE: PVC section 1 or 1.5 or 2.5 mm2 (on request other sections) TEMPERATURE: 70 °C DIAMETER: 4 mm On request other diameters

STANDARD INSTRUMENTS The proposed instruments are an example of the various available combinations:

• Analogue professional types in typical bakelite case and digital versions • Analogue and digital types in plastic case • Analogue and digital type in aluminium case for use on the desk or vertical with

possibility of plug-in insertion in the suitable support structure

GENERAL TECNICAL CHARACTERISTICS FOR INSTRUMENTS • DC, AC, DC and AC use • Type of instruments: ammeter, voltmeter, wattmeter,

varmeter, frequency-meter, power factor meter etc.. • Some models are supplied with RS232 interface, digital

instruments with option wireless • Ranges: to be defined 1, 2, 3, 4, 5 …. ranges • Instruments precision: 0.2 – 0.5 – 1 – 1.5 – 2 – 2.5 - …..

We are at disposal to quote the configuration you wish / certificate of calibration included

On request

rack for cables




Ver 04.15

AVAILABLE MANY DIFFERENT RANGES ON REQUEST

Digital instruments in plastic case AMMETERS, VOLTMETERS, WATTMETERS, VARMETERS, PHASEMETERS, FREQUENCY-METERS Accuracy 1 – 1.5 - 2 – 2.5 % Display: 3 or 3 ½ or 4 or 4 ½ digits

AVAILABLE R232-USB-WI-FI VERSION Full range of instruments for dc and ac use with several ranges and precision Terminals with concentric profile according to safety rules.

On request: shunt / current and voltage transformers

DOUBLE DISPLAY DIGITAL AND ANALOGUE




Ver 04.15

Low cost energy analyzer type APR/FR Measure of electrical parameters in a single-phase and three-phase networks. From 0 to 500 V and from 0 to 6 A multirange (8 for voltage, 8 for current) • simultaneous acquisition of: RMS voltages, RMS currents, frequency, cosφ, powers, energies, THD… • in field configuration of CT and VT ratios for direct values reading (automatic selection engineering units) • a single device for all type of connection: single-phase, three-phase with 2 CT (ARON), three-phase with 3 CT • automatic change of groups of measures • averaging with selectable response time • addressable RS485 serial output on request Auxiliary power supply 230 V AC

analogue and digital type in aluminium case for use on the desk or vertically with possibility of plug-in insertion in the suitable support structure AMMETERS, VOLTMETERS, WATTMETERS, VARMETERS, PHASEMETERS, FREQUENCY-METERS Accuracy 1 – 1.5 - 2 – 2.5 %

AVAILABLE TYPES: • Moving coil • Moving iron • Dynamometer • Electronic

Digital type with display: 3 or 3 ½ or 4 or 4 ½ digits Available interface wireless or USB for digital type Full range of instruments for dc and ac with several ranges and precision On request: shunt / current and voltage transformers ELECTRONIC INSTRUMENTS see dedicated catalog

- Multimeters, portable or bench with and without interface - stabilized power supplies single dual triple with and without interface - Analog and digital oscilloscopes various range - Function generators - Spectrum analyzers - Logic analyzers - frequency - Current clamps capacitance meters - Various analyzers

RESISTANCE DECADE BOXES - ACCURACY 0.5% From 10x0,1Ω a 10x1MΩ 8 decades terminals standards securities Plastic container, aluminum panel with synoptic Double insulation

CAPACITANCE DECADE BOXES - ACCURACY 1 % From 10x100 pF a 10x1 µF 5 decades terminals standards securities Plastic container, aluminum panel with synoptic Double insulation

INDUCTANCE DECADE BOXES From 10 x 1 µH a 10 x 1 H 7 decades terminals standards securities Plastic container, aluminum panel with synoptic Double insulation




Ver 04.15

SET OF MODULES FOR ELECTRONICS TRAINING

The series is a comprehensive collection of training aids, implemented in a modular form, which covers the range from the basics of electricity, up to circuit application of general electronics. The trainer consists of a collection of box-like modules, 100 x 160 x 20mm size, with a magnetic base and a printed circuit board front face. The PCB face includes the components and devices needed to perform the experiments with clear silk-screen printing indicating the component symbols, identities and interconnections. For the execution of the experiments the modules are placed on a metallic plate (Base Plate, 430x310x30 mm) where they are retained by magnetic strips. The connections to the power supply and to the measuring instruments are by plug-in cables. Certain experiments require more than a single module to be interconnected. This is also done by plug-in cables. The magnetic latching of the modules to the metallic Base Plate ensures that the various items remain steadily fixed even if the Base Plate is placed vertically, as in case of collective demonstrations by the Instructor. A great variety of modules are available to cover in smooth steps the various subjects.

CODE N° DESCRIPTION

B110

5

B110

5T

B111

0

B111

2

B111

5

B113

0 B11 M10 Elementary DC circuits * B11 M12 Elementary Electric Circuits (2) * * B11 M13 Elementary Electric Circuits * * B11 M14 Batteries * * B11 M16 Relays * * B11 M18 Electromagnetism (1) * * B11 M20 R, L, C circuits * B11 M21 Transformers * * B11 M23 R, L, C circuits * * B11 M24 R, L, C measurement bridge 0 0 0 B11 M25 Solderless breadboard * * 0 0 0 0 B11 M30 Resonant circuits * B11 M40 Passive filters * B11 M50 Diodes * B11 M60 Rectifier circuits * * * B11 M64 3-Phase AC loads * B11 M70 SCR and UJT * B11 M80 DIAC and TRIAC * B11 M90 Transistor characteristics * B11 M100 Transistor amplifiers * B11 M102 Darligton and MOSFET power amplifiers 0 0 B11 M104 Emitter-coupled and differential amplifiers 0 0 B11 M105 Signal generators * B11 M106 Power amplifiers (1) 0 0 B11 M108 Complementary and quasi-complementaty power stages 0 0 B11 M109 Loudspeaker 0 0 B11 M110 Field Effect Transistor * B11 M120 Voltage and Current Regulators *




Ver 04.15

B11 M121 Integrated Voltage Regulators B11 M122 HF Oscillators (1) B11 M123 HF Oscillators (2) B11 M130 Operational Amplifiers * B11 M132 Basic op amp configuration * * B11 M133 Sinewave generators * B11 M134 Measurement of op amp parameters 0 * 0 B11 M136 Op amp application circuits (1) * * B11 M137 Op amp applications (2) 0 * B11 M138 V/I and I/V converters * * B11 M139 Clipper and Clamper circuits B11 M140 Digital gates * B11 M142 Analog switches * B11 M144 Active filters (1) * B11 M145 Multiple active filters * B11 M146 Switched-capacity filter * B11 M148 Analog multiplier * B11 M150 Transistor Switch * B11 M151 Transistor Multivibrators * B11 M152 Schmitt Trigger * B11 M153 Transistor Signal Generators * B11 M154 Basic Logic gates * B11 M155 Digital gates * B11 M156 AND/OR/NOT gates * B11 M157 NAND/NOR gates * B11 M158 Special Logic Functions * B11 M159 Binary<==>Decimal converters * B11 M160 Quad D-type flip-flop module * B11 M161 CMOS applications (1) * B11 M162 Output devices * B11 M163 Double IC holder and IC set * B11 M170 Opto-electronic components * B11 M172 Photo-Sensitive devices (Photocells) B11 M210 AC/DC converter with stabilized outputs B11 M220 DC/DC converters B11 M230 8-Bit Video A/D converter B11 M240 8-Bit Video D/A converter B11 M250 Digital Voltmeter B11 M260 Zero-Voltage Trigger module B11 M302 Switched-capacitor Filter B11 M304 2-GHZ Frequency Synthesizer B11 M306 Quartz Oscillators B11 M402 Pressure Sensor B11 M404 Temperature transducers B11 M406 Light Sensors B11 M408 Humidity Sensor B11 M410 Tilt Sensor (Digital Protractor) B11 M412 Infrared Transmitter/Detector B11 M414 Drift/Wind Sensor B11 M416 Smoke Sensor B11 M418 Laser Emitter B11 M420 Laser Detector B11 M422 Photovoltaic Cells

B4191 Power supply * * B4192 Power supply * * * B4196 Power supply *

Mother board, case, cables * * * * * * *= included 0= Optional




Ver 04.15

STUDY OF THE ROLE OF THE EARTH AND A DIFFERENTIAL Safety terminals 4mm, located on the front, let the student measure the fault currents, and insert different resistive modules. These modules simulate two earth resistance values, and two leakage current values. One module with variable resistance enables the differential's tripping current to be measured.

ELECTRICAL INSTALLATION WORKSTATIONS

A2405 for 2 or 4 working places Robust, simple, residual current and overcurrent protection, schemes and components according to EEC rules Dimensions of the bench: 2000 x 1000 x 800 (1890) mm (A2410) - 1100 x 1000 x 800 (1890) mm (A2405) Bi-laminated wood, conglomerate top, 20 mm thick, white colour Cable 3 m (5 wires) 2,5 mmq with CEE plug (On request other version) Power supply 380 V + N + E ( other power supply available on request) included: (for every side) Residual current automatic switch 4x16 A, Id 0.03 A Emergency mushroom button Key switch Output L1, L2, L3, N, T at safety terminals 4 mm Schuko/universal socket outputs 10-16 A Lamp holder with indicator lamp Output 0-12-24 Vac with security terminals 4 mm and protection with fuse Lamp holder with indicator lamp of low voltage Optical circuit tester

ON REQUEST OTHER VERSION Electrical installation bench may be equipped with: a) Wooden panel for residential installations b) Punctured metallic panel for industrial installations c) DIN bar panel d) Panel with 12 places for plug installation e) Acoustic circuit tester f) D.c. output 12-24 V/4 A g) Single drawer for A2405 or double drawer for A2410 h) Magneto-thermic protection instead of the fuse




Ver 04.15

PANELS FOR A2405 PANEL WITH 12 FLUSH-MOUNTED BOXES FOR DOMESTIC INSTALLATION WOODEN PANEL PANEL OF PIERCED METAL GALVANIZED SHEET ( for industrial installation) PANEL WITH METALLIC RODS DIN TYPE ( for industrial installation, pneumatic

Set of components for industrial installations Set of components for civil installations Tools suitcase OPTION: KIT FOR PNEUMATICS AND ELETTROPNEUMATICS PANEL WITH 12 FLUSH-MOUNTED BOXES FOR DOMESTIC INSTALLATION WOODEN PANEL PANEL OF PIERCED METAL GALVANIZED SHEET ( for industrial installation) PANEL OF PIERCED METAL GALVANIZED SHEET AND RAIL DIN ( for industrial installation)

CABINET FOR PANELS

A241 with built-in panel storage




Ver 04.15

KIT LIGHTING INSTALLATIONS TYPE IMP/ILL The kit allows students to acquire the basic competences on electrical circuits. Includes interchangeable modules that can be connected to each other using cables typical laboratory. Modules insulating material with clear synoptic representing the connection diagram and predisposition for fixing the DIN bar placed on the panel. Includes devices necessary to realize the experimental program provided in the kit. Safety Terminals and user manual with tutorials. The kit includes the following modules a) Module One Pole, One Way Switch 250 V c.a. 10 A b) Module One Pole, Two Ways Switch 250 V 10 A c) Module switch 250 V c.a. 10 A d) Module One Pole Reversing Switch 250 V c.a. 10 A e) Module Illuminated Pushbutton 250 V 10 A f) Module Universal Socket g) Module Lamp holder and Lamp h) Module fuse holders complete with fuses 2 A, 250 e 500 V i) Module transformer 100 VA 127 V/220 V 2x12 V l) Module relay 4 positions 10 A 220 V m) Module stairs light timing relay 10 A 220 V excitation 220 V n) Modulo fluorescent lamp complete with lamp holder, starter and choke o) Set of Safety Terminals 4 mm 2,5 mm2

SUGGESTED EXERCISES

• Single point controlled lighting system • Single point controlled lighting system with socket • Switch controlled two lamps lighting system • Two point controlled lighting system • Three point controlled lighting system • Four point controlled lighting system • Circuit breaking relay controlled lighting system • Switching relay controlled lighting system • Time relay controlled lighting system • Hot cathode fluorescent lamp system

KIT SIGNALLING INSTALLATIONS TYPE KIT/SEGN The kit allows students to acquire the basic competences on electrical circuits. Includes interchangeable modules that can be connected to each other using cables typical laboratory. Modules insulating material with clear synoptic representing the connection diagram and predisposition for fixing the DIN bar placed on the panel. Includes devices necessary to realize the experimental program provided in the kit. Safety Terminals and user manual with tutorials. The kit includes the following modules

a) Module with n. 3 bell pushbuttons b) Module with n. 3 door opener pushbuttons, c) Module with n. 2 fuse holders complete with fuses d) Module transformer mains 2x12V, d) Module with n. 3 bell e) Module with n. 3 buzzer f) Modulo pulsanti g) Module electric lock h) Module external pushbutton panel with n. 3 pushbuttons d) Modulo relay e) Module signalling panel with 4 displays f) Set of Safety Terminals 4 mm 2,5 mm2

SUGGESTED EXERCISES

• Single control signalling system • Reciprocal contro signalling system • Display indicator and reset pushbutton signalling system • Ringing system with doors and main entrance control • Electric lock bell system




Ver 04.15

RESIDENTIAL INSTALLATIONS MODULE SET TYPE IMP/CIV The kit allows students to acquire the basic competences on electrical circuits. Includes interchangeable modules that can be connected to each other using cables typical laboratory. Modules insulating material with clear synoptic representing the connection diagram and predisposition for fixing the DIN bar placed on the panel. Includes devices necessary to realize the experimental program provided in the kit. Safety Terminals and user manual with tutorials. The kit includes the following modules The kit must be composed of: n. 3 general purpose pushbutton, n. 3 bell pushbutton, n. 3 door opener pushbutton, n. 3 switches, n. 2 change-over switches, n. 2 reversing switches, n. 1 mains socket, n. 3 bells, n. 1 buzzer, n. 2 fuse holders complete with fuses, n. 1 stairs light timing relay, n. 1 pulse relay, n. 2 lamp holders complete with incandescent lamps, n. 1 fluorescent lamp complete with lamp holder, starter and choke, n. 1 electric lock, n. 1 external pushbutton panel with 3 pushbutton, n. 1 signaling panel with 4 displays, n. 3 wall-type entry phones complete with buzzer and 3 pushbutton, n. 1 power supply for the entry phone, n. 1 transformer mains/2x12V, 1 piece of DIN section, n. 1 set of screws to fix the components,

SUGGESTED EXERCISES • Single-point controlled lighting system • Single-point controlled lighting system with socket • Switch-controlled two-lamps lighting system • Two-point controlled lighting system • Three-point controlled lighting system • Four-point controlled lighting system • Circuit breaking-relay controlled lighting system • Switching-relay controlled lighting system • Timed-relay controlled lighting system • Hot cathode fluorescent lamp system • Signaling installations • Single-control signaling system • Reciprocal control signaling system • Display indicator and reset pushbutton signaling system • Ringing system with doors and main entrance control. • Electric lock bell system • Two reciprocal call house-phone at short distance. • Two reciprocal call house-phone at long distance • Coupled two house-phone system • Main house-phone and two shunted house-phones system • Intercommunicating house-phone system

INDUSTRIAL INSTALLATIONS MODULE SET TYPE IMP/IND The kit allows students to acquire the basic competences on electrical circuits. Includes interchangeable modules that can be connected to each other using cables typical laboratory. Modules insulating material with clear synoptic representing the connection diagram and predisposition for fixing the DIN bar placed on the panel. Includes devices necessary to realize the experimental program provided in the kit. Safety Terminals and user manual with tutorials. The kit includes the following modules - N.1 Module with n. 5 fuse holders complete with fuses 4/6 A - N.1 module TR 220/24 with transformer 230/12-24 V 50-60 Hz 100 VA - N.4 Module IMPI04/K with electromagnetic contactor for industrial uses coil of 24 V a.c. - N.6 Module IMPI05/T timing relay - N.3 Module auxiliary relay for industrial uses, coil 24 V a.c. - N.2 Module IMPI02/PL3 with n. 3 push-buttons for industrial uses - N.2 Module IMPI03/LS with n. 3 lamp sockets for industrial uses with lamps of 24 V - N.1 Module with three-phase Graetz bridge 600 V - 25 A max - N.2 Module with thermal relay for industrial uses with NO-NC auxiliary contacts - N.2 Module with micro switch for industrial uses - N.2 Module with micro switch for industrial uses type MBB - N.2 Module with micro switch for industrial uses type BBM - N.1 Module with four-pole switch keyer 16 A/400 V - N.1 Module with three-pole changeover switch keyer 16 A - 400 V - N.1 Module with three-pole inverter keyer 16 A - 400 V - N.1 Module with star/delta starting keyer 16 A/400 V - N.1 Module with three-pole keyer for Dahlander motors 16 A - 400 V - N.1 Module with three-phase terminal boards for power circuits - N.1 Module with three-phase terminal boards for switching/connecting control circuits - N.1 Module Traffic light unit - Set of Safety Terminals 4 mm 2,5 mm2

• controlling a contactor from a point • jogging of a contactor • separate control of two contactors




Ver 04.15

• remote control reverser • remote control reverser with block on push-buttons • remote control reverser with timer • remote control of an elevator (A) • star-delta starting • starting with stator resistors • starting with autotransformer • starting with rotor resistances; exclusion with continuous variation • remote controlled pole-change switch for 2-winding motors • remote controlled pole-change switch for single-winding (Dahlander) motors • reverse current braking • direct current braking • control of a circuit breaker • switch keyer • changeover switch keyer • inverter keyer • star/delta starter keyer • speed switch keyer • control of an elevator (B) • sequence lighting of advertising neon signs • starting with rotor resistances; exclusion with step variation • remote control reverser, star-delta starter • emergency/extra power line • traffi c light system • main control of a crane

OPTION REQUEST - CONTROL PLC - MODULES TO REALIZE SIMULATION FAULT IN THE CIRCUIT The modules are the same modules of the set for industrial installations, modified on their back with the addition of switches to be used to cause the defects in the circuits. Therefore more than 20 defects can be simulated.

MOTOR CONTROL SIMULATOR TYPE CONTMOT / SIM Simulator for motor control panel with synoptic including : N. 4 contactors, N. 1 thermal relay, N. 4 signal lamps, N. 4 buttons (forward, reverse, stop, emergency), No 1 tachometer 3 ½ digits with sensor mounted on the motor with two selectable alarms, N. 1 Three-phase cage induction motor 42V - 200W, N. 1 three-phase transformer 380/42 V. It is required a PLC with at least 8 inputs and 8 outputs. The simulator allows to start the motor star / delta in rotation braking version.

PNEUMATIC ELECTROPNEUMATIC SYSTEM require dedicated catalogue TRAINERS AVAILABLE: KIT ALREADY INSTALLED OR VERSION INSTALL/ REMOVE




Ver 04.15

TWO-FAMILY HOUSE PHONE KIT Two-family installation house phone mounted on panel: - n. 2 house phones, electronic call button - Outside place with N. 2 call buttons - Power supply Equipped with manuals and exercise ONE FAMILY HOUSE PHONE KIT One-family installation house phone mounted on panel: - n. 1 house phone and call button - Outside place with call buttons - Power supply - It allows the audio communication and the opening of the electrical lock. Equipped with manuals and exercise TWO-FAMILY VIDEO INTERCOM KIT Two-family installation video intercom mounted on panel: - N. 2 internal places with flat monitor 4 inches, n. 3 service buttons. Brightness and contrast control. - Outside place with two call buttons, phonic group, CCD video-camera, with sensor 1/3" and infrared

lighting. - Power supply - Video signal switch Equipped with manuals and exercises ALTERNATIVE FOR THE REALIZATION OF A ONE-FAMILY SYSTEM:

Equipped with equipment as above described but for one-family use VIDEO-CONTROL KIT installation video-control kit mounted on panel: - N. 1 white/black video-camera at high solution - N. 1 objective with automatic diaphragm for video-camera and sensor with brightness zoom lens F1,8 - N. 1 monitor 12” Power supply - N. 1 rotary stirrup - Cyclic selector for the switching up to 4 video cameras on 1 monitor Equipped with manuals and exercises

ON REQUEST

OTHER VERSIONS TELEPHONE KIT Composed of several components in industrial version fixed on the frame with piedistallo.Include: kit components: telephone switch comprising n. 1-2 panels and n. 3-6 handsets, n. 2 phones. Everything is fixed on the module. Each component is provided with a terminal block for easy wiring of the components by the user. In this way it is possible to assemble and remove the plant in a short time and allow more students to become familiar in the technical installation by following the wiring diagram and guided exercises attached to the supply.




Ver 04.15

TESTING PANEL OF ANTI THEFT SYSTEMS Electronic anti theft control unit magnetic detectors micro-switch detectors passive infrared sensors volumetric detector of double (IR + microwave) technology vibration detector electronic key for remote control of control unit self-powered outdoor siren battery

Option GSM/GPRS modem for remote control via mobile phone FIREPROOF INSTALLATION TRAINER installation fireproof kit mounted on panel:

- Detector smoke - Temperature detector - Fireproof control unit - Acoustic signaller - percussion sound and light alarm - manual pushbutton of fi re warning - rate-of-rise heat detector - phone dial - Electromagnetic apparatus for fireproof door

TV AND SAT KIT INSTALLATION The trainer uses equipment which is normally in commerce for the assembly of a system of TV and satellite. EXERCISES: Characteristics and operation of components for TV antenna systems: mixers; broad-band, multi-input and channel amplifiers; filters; converters; power supply units; cables; sockets; shunts; dividers and antennas • Distribution network: cascade 1 and/or 2 columns, and by nodes • Single broad-band system; multiple system with band amplifiers, channel converter and with channel and power amplifiers • Using equalizing filter • Using antennas TV ANTENNA TRAINER The trainer allows the study of an antenna installation in a palace with 12 flats, 3 floors.

MEASUREMENT INSTRUMENTS: available various field strength analyser models for tests on installation TV and sat. Equipped with manuals and exercises




Ver 04.15

AUTOMATION FOR SLIDING AND SWING GATES TYPE CANC/SIM The trainer includes all the necessary for the working: • Gate with hinged door and sliding door and accessories • Opening motors • Selector • Control unit • Flashing light Radio kit (one for type of gate), transmitter, photocells, complete set of accessories • Equipped with manuals and exercises OPTION • Simulator of breakdowns through micro switch. On request types only hinged door or only sliding door BUILDING MANAGEMENT SYSTEM ( KNX BUS ) The wiring installation training system covers planning, installation and testing of an intelligent, bus-capable installation. Project planning and parameter setting. Project planning using ETS5 software Addressing modules Wiring Testing AVAILABLE KNX BUS TRAINER FOR: • Residential • Commercial • Hotel • Industrial

INDUSTRIAL INSTALLATION TYPE PANN/IMPI This system has been designed so that students can assemble, analyze and test a wide range of more and more complex electric circuits. Main components: •No. 4 electro-magnetic contactors for industrial uses, with three NO working contacts, 2+2 NO-NC auxiliary contacts and a coil of 24 Vac • No. 4 auxiliary relays for industrial uses with 3 exchange contacts and coil of 24 Vac • No. 2 three-pole thermal relays with NO-NC auxiliary contacts, 3 delayed relays (1.5 to 30 s) and a coil of 24 Vac • No. 5 lamp sockets with warning lights of 24 V of different colours • No. 4 push-buttons of different colours, with NO-NC contacts, for industrial uses • No. 1 emergency push-button with mechanical holding and 2 NO-NC contacts • No. 1 three-phase power supply and distribution unit with neutral and earth conductors, protected against overcurrents by differential circuit breaker of 6 A, for powering power circuits • No. 1 auxiliary power supply unit, protected against overcurrents by differential circuit breaker of 3 A, for outputting and distributing voltage of 24 Vac for control circuits (single-phase SELV transformer of 72 VA) • No. 1 fault-insertion system that can be used to insert more than 50 faults on the devices included in the panel




Ver 04.15

DISTRIBUTION CABIN - STATE OF THE NEUTRAL - INDUSTRIAL INSTALLATION TYPE PANN/DISTRIB The simulator reproduces a typical installation of electricity distribution at low voltage. The system can be configured as TN, TT, IT. The module simulates distribution cabins medium/low voltage. It includes distribution transformer, breaker, over-temperature, residual current protections, line protections at output. It allows to study the different states of neutral in low voltage distribution plant. Measuring instrument and remote control for: voltage, current, power, energy, pf. Complete of software, monitoring and data storage. Measurement of earth resistance, insulation, loop resistance, functionality of residual current switches, continuity of protection conductor. EXERCISES: • study of systems with system TT, TN, IT • Protection against direct contact; Protection against indirect contact by earthing, electrical separation, differential circuit breaker; overcurrent protection, selectivity in protection devices • construction plant and ground conductors • artificial and natural earth plates • Monitoring of insulation resistance in isolated systems from the earth (IT) • protective and sectioning • analysis of the suitability of materials and equipment used and optimization and project costs Experiences with the use of instrumentation is not included: • identification of the neutral conductors and earth • evidence of continuity of protective conductors • analysis of functionality differentials • verification of protection with automatic disconnection • measurement of earth resistance • measurement of insulation resistance • measurement of the resistance / impedance of the fault • Current measurement of the first earth fault in isolated systems EDUCATIONAL KIT FOR STUDYING OF THE INSTALLATIONS AUTOMATIC POWER FACTOR TYPE PANN/RIFAUT The module allows you to make teaching experiences on industrial installations that use electronic devices to control the power factor of electric utilities in low voltage (400 V). The panel is equipped with safety terminals and clear synoptic that allows to create experiences related to automatic power factor correction circuits with different capacitive steps controlled by an electronic control unit. Includes two energy analyzers which measure: voltage, current, active reactive apparent power, power factor in a single-phase or three-phase systems, with or without neutral. EXERCISES: measurements and relationships between the apparent, active, reactive power power factor correction of localized single-phase electric utilities power factor correction of localized three-phase electric utilities discharge of the energy stored in the capacitors automatic centralized power factor correction systems with 1-2-3 steps equal automatic centralized power factor correction systems with 1-2-3 steps one double of other filtering of harmonic currents in the capacitors. OPTION SCADA CONTROL

SOLDERS AND DESOLDERS




Ver 04.15

AUTOMATED ELECTRICAL MEASUREMENTS Data acquisition system in electrical measurements and

electrical machinery of any power and electrical characteristics

SERIES ETC WIRELESS INTERFACE

We propose several trainers dedicated to the study of various electrical machines and power measurements in a three-phase system ARON. Includes WIRELESS interface and software that guides the user step by step.

Ability to connect the system to LIM and TABLET for a modern teaching and sharing of tests performed.

TRAINER WIRELESS SINGLE PHASE TRANSFORMER Type ETCW/TM

terminal according accident prevention

The system includes: - Module measuring instruments: digital instrumentss 4 digits 10,000 points, precision ac 0.5%, interface wireless.Tipo MS / TRTRMON V1 - measure dc and ac range 100V - 750Vac / 1000Vdc V2 - measure dc range 100V - 1000V dc A1 - measure dc and ac range 1000mA - 10 A W1- range 1000W - 10.000W W2- range 1000W - 10.000W

A4110S - SINGLE PHASE TRANSFORMERS Educational transformer basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The primary windings have a central tap to make it possible to supply full or half of the nominal voltage. The secondary windings are implemented in two sections for separate use or, by connecting them in series, for cumulative output voltage. Nominal Power: 200 VA (Other Nominal Powers are available on request ) Voltage: 110-220 V 50-60 Hz (Other Voltages can be specified on the order included 24 / 48 V )

- Set of cables accident prevention wires of varying length red and black colors for the tests

- Manual and guided experiences

- Software unlimited license

SOFTWARE SUITABLE FOR EXPERIENCES WITH SINGLE-PHASE TRANSFORMER, COMPLETE OF CALCULATION OF CONVENTIONAL EFFICIENCY AND RELEVANT DIAGRAMS TYPE ETC-SWTM 1 Measurement of winding resistance by voltage-current method. 2 Determination of the transformation ratio with direct reading of voltage. 3 No-load test with determination of Po, Io, Cosfìo. 4 Short circuit test with determination of Pcc, Vcc, Cosfìcc. 5 Determination of the equivalent circuit and calculation of efficiency and voltage drop, according to load variations.




Ver 04.15

TRAINER WIRELESS THREE PHASE TRANSFORMER Type ETCW/TT

terminal according accident prevention

The system includes: - Module measuring instruments: digital instrumentss 4 digits 10,000 points, precision ac 0.5%, interface wireless.Tipo MS / TRTRTRI

V1 - measure dc and ac range 100V - 750Vac / 1000Vdc V2 - measure dc and ac range 100V - 750Vac / 1000Vdc A1 - measure dc and ac range 1000mA - 10 A A2 - measure dc and ac range 1000mA - 10 A A3 - measure dc and ac range 1000mA - 10 A W1- range 1000W - 10.000W W2- range 1000W - 10.000W A4120S - THREE PHASE TRANSFORMERS Educational transformer basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The primary windings have a central tap to make it possible to supply full or half of the nominal voltage. The secondary windings are implemented in two sections for separate use or, by connecting them in series, for cumulative output voltage. Nominal Power: 200 VA (Other Nominal Powers are available on request ) Voltage: 220-380 V 50-60 Hz (Other Voltages can be specified on the order included 24 / 48 V ) - Set of cables accident prevention wires of varying length red and black colors for the tests


- Software unlimited license SOFTWARE SUITABLE FOR EXPERIENCES WITH THREE-PHASE TRANSFORMER, COMPLETE OF CALCULATION OF CONVENTIONAL EFFICIENCY AND RELEVANT DIAGRAMS TYPE ETC-SWTT 1 Measurement of winding resistance by voltage-current method. 2 Determination of the transformation ratio with direct reading of voltage. 3 No-load test with determination of Po, Io, Cosfìo. 4 Short circuit test with determination of Pcc, Vcc, Cosfìcc. 5 Determination of the equivalent circuit and calculation of efficiency and voltage drop, according to load variations.




Ver 04.15

TRAINER WIRELESS AC MOTOR Type ETCW/MCA

terminal according accident prevention The system includes: - Module measuring instruments: digital instrumentss 4 digits 10,000 points, precision ac 0.5%, interface wireless. Tipo MS / TRMOTTRI

V1 - measure dc and ac range 100V - 750Vac / 1000Vdc V2 - measure dc and ac range 100V - 750Vac / 1000Vdc A1 - measure dc and ac range 1000mA - 10 A A2 - measure dc and ac range 1000mA - 10 A A3 - measure dc and ac range 1000mA - 10 A W1- range 1000W - 10.000W W2- range 1000W - 10.000W

A4220 - SQUIRREL CAGE THREE PHASE MOTORS Educational motors basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections that can be configured for STAR or DELTA schemes. Nominal Power 200W (Other Nominal Powers are available on request ) Voltage: 220 /380 V (Other Voltages can be specified on the order included 24 / 48 V ) Nominal Speed 2850 50 Hz Included: Star-Delta starter - Set of cables accident prevention wires of varying length red and black colors for the tests


- Software unlimited license SOFTWARE SUITABLE FOR EXPERIENCES WITH ELECTRICAL MOTORS, COMPLETE OF CALCULATION OF CONVENTIONAL EFFICIENCY AND RELEVANT GRAPHIC REPRESENTATIONS AND CIRCULAR DIAGRAMS, WHERE NECESSARY TYPE ETC-SWM 1 Measurement of stator and rotor resistance by voltage-current method. 2 Measurement of the transformation ratio 3 No-load test with determination of Po, Io, Cosfìo. 4 Short circuit test with determination of Icc, Cosfìcc. 5 Tracing of the circular diagram and calculation of the conventional efficiency. 6 Direct test with determination of electrical and mechanical characteristics with relevant visualization by tables and diagrams.

OPTION AC MOTOR CONTROL TYPE REG/CA ELECTRONIC MODULE OF SPEED ADJUSTMENT IN A.C. OPEN AND CLOSED LOOP




Ver 04.15

TRAINER WIRELESS DC MOTOR Type ETCW/MCC

terminal according accident prevention The system includes: - Module measuring instruments: digital instrumentss 4 digits 10,000 points, precision ac 0.5%, interface wireless. Tipo MS / TRMOTCC V1 - measure dc range 100V - 1000Vdc V2 - measure dc range 100V - 1000Vdc A1 - measure dc range 1000mA - 10 A A2 - measure dc and ac range 1000mA - 10 A W1- range 1000W - 10.000W A4240 - DC COMPOUND EXCITATION MACHINES AVAILABLE A4242 - DC SERIES EXCITATION MACHINES A4244 - DC SHUNT EXCITATION MACHINES Educational motors/generators basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The machine has two excitation windings: one for series and one for shunt excitations. Nominal Power 200W (Other Nominal Powers are available on request ) Motor Input Voltage - Generator Output Voltage : 220 V (Other Voltages can be specified on the order included 24 / 48 V ) Nominal Speed 2850 50 Hz Excitation Voltage 220V Included: Starting Rheostat and Excitation Rheostat - Set of cables accident prevention wires of varying length red and black colors for the tests


- Software unlimited license SOFTWARE SUITABLE FOR EXPERIENCE ON D.C. MACHINES TYPE ETC-SWCC D.C. MOTOR WITH SEPARATE EXCITATION 1 Measurement of winding resistance by voltage current method. 2 Determination of excitation characteristic 3 Determination of external characteristics 4 Determination of regulation characteristic. 5 Determination of mechanical and iron loss. 6 Calculation of the conventional efficiency. 7 Determination of the characteristics couple – speed and efficiency.

OPTION DC MOTOR CONTROL TYPE REG/CC ELECTRONIC MODULE OF SPEED ADJUSTMENT IN D.C. SYSTEM OF MOTOR CONTROL FOR D.C. COMPOSED BY SPEED CONTROL BOARD FOR SERVOMOTOR OF LATEST GENERATION




Ver 04.15

TRAINER WIRELESS SYNCHRONOUS THREE PHASE MACHINES

Type ETCW/MS terminal according accident prevention

The system includes: - Module measuring instruments: digital instrumentss 4 digits 10,000 points, precision ac 0.5%, interface wireless. Tipo MS / TRMOTSIN V1 - measure dc and ac range 100V - 750Vac / 1000Vdc V2 - measure dc and ac range 100V - 750Vac / 1000Vdc A1 - measure dc and ac range 1000mA - 10 A A2 - measure dc and ac range 1000mA - 10 A A3 - measure dc and ac range 1000mA - 10 A W1- range 1000W - 10.000W W2- range 1000W - 10.000W A4223S - SYNCHRONOUS THREE PHASE MACHINES Educational motors/generators basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The stator can be configured for STAR or DELTA schemes. Nominal Power 200W (Other Nominal Powers are available on request ) Voltage 220 - 380 V (Other Voltages can be specified on the order included 24 / 48 V ) Nominal Speed 2850 50 Hz Included: Excitation Rheostat - Set of cables accident prevention wires of varying length red and black colors for the tests


- Software unlimited license SOFTWARE SUITABLE FOR EXPERIENCE ON ALTERNATOR TYPE ETC-SWMS 1 Determination of winding resistance by voltage-current method. 2 Determination of no-load or magnetization characteristics 3 Determination of short circuit characteristic and calculation of the synchronous impedance. 4 Determination of additional losses. 5 Determination of external characteristic by the simplified method of Behn-Eshemburg. 6 Tracing of the regulation characteristic by using the simplified method of Behn-Eshemburg and calculation of the conventional efficiency.




Ver 04.15

TRAINER WIRELESS THREE PHASE SYSTEM

Type ETCW/ST terminal according accident prevention

The system includes: - Module measuring instruments: digital instrumentss 4 digits 10,000 points, precision ac 0.5%, interface wireless. Tipo MS / TRTRIF V1 - measure dc and ac range 100V - 1000Vdc A1 - measure dc and ac range 1000mA - 10 A A2 - measure dc and ac range 1000mA - 10 A A3 - measure dc and ac range 1000mA - 10 A W1- range 1000W - 10.000W W2- range 1000W - 10.000W

- Set of cables accident prevention wires of varying length red and black colors for the tests


- Software unlimited license 1 Measurement of power in a single-phase circuit. 2 Measurement of power and power factor in three-phase symmetrical and balanced system by ARON insertion.

ACQUISITION MODULE LINK WIRELESS TYPE SM/RFLINK Link Module acquisition to be connected to the USB port of the computer to acquire data wireless




Ver 04.15

ELECTRICAL TEST COMPUTER ETC ELECTRICAL MEASUREMENT INSTRUMENTS AND AUTOMATED SYSTEM

SAMAR is offering a system for data acquisition and control, suitable for electrical measures and machines. The purpose of our suggested system, combined with the traditional measuring methods, is to ensure that future technicians compare traditional methods with new technologies and with different work methods. USB interface. The Data Acquisition Unit consists of: - multi function instruments with interface, 4000 points LCD and bar-graph display, on which readings of AC and DC voltages and currents, resistance, temperature and frequency can be manually scrolled; they are particularly useful in performing the general electricity measures. – power analyser with graphic display to measure power related parameters such as V, I, W, VAR, cosf , Hz, KWh, KVARh, averages, and distortion measures up to the 50th harmonic. They can also be scrolled manually. - set RPM optical sensor and instruments and torque sensor and instruments The system enables: - Electrical measurements and electrical machines - Energy measurement, electrical power network analysis, energy quality, energy saving - harmonic distortion analysis It guides the user through the exercises by means of clear menu and instructions, online helps, input data validation as far as ranges and consistency are concerned. Reproductions of instrument faces are shown on the computer monitor and their readings are updated in real time. The data acquired are visualized on tables and graphs for detailed analysis and for subsequent printing. The parameters and characteristics such as colours and lines can be selected by the user. By manually inserting test data through the PC keyboard, instead of acquiring them from the computer, it is possible to simulate and demonstrate tests and exercises without having connected any equipment. The system enables: - Electrical measurements and electrical machines - Energy measurement, energy saving - Analysis of electrical mains, energy quality - Analysis of harmonics The system of electrical automated measurements includes: a) Measurement unit type ETC-N: turret including instrument with graphical display for measurements of V, I, W, VAR, cosfi,Hz, KWh, KVARh, average and harmonics up to 50° in single-phase and three-phase systems and n. 2 digital multimeters with large display , 4000 readings and bargraph for measurement d.c. and a.c. of voltage and current + temperature and frequency. This unit can be used also for general electrical measurements. b) Group to detect mechanical measurements type ETC-M: (number of rounds and optical sensor) and couple (instrument and load cell to be installed on the brake not included) c) USB adapter type ETC-SKUSB Design & Project & Production & Trading of Industrial and Educational Instruments Software consists of: Refer to the list of software described above (available English manuals) 1) SOFTWARE SUITABLE FOR EXPERIENCES IN GENERAL ELECTROTECHNICS TYPE ETC-SWEG 2) SOFTWARE SUITABLE FOR EXPERIENCES WITH SINGLE-PHASE TRANSFORMER, COMPLETE OF CALCULATION OF CONVENTIONAL EFFICIENCY AND RELEVANT DIAGRAMS TYPE ETC-SWTM 3) SOFTWARE SUITABLE FOR EXPERIENCES WITH THREE-PHASE TRANSFORMER, COMPLETE OF CALCULATION OF CONVENTIONAL EFFICIENCY AND RELEVANT DIAGRAMS TYPE ETC-SWTT 4) SOFTWARE SUITABLE FOR EXPERIENCES WITH ELECTRICAL MOTORS, COMPLETE OF CALCULATION OF CONVENTIONAL EFFICIENCY AND RELEVANT GRAPHIC REPRESENTATIONS AND CIRCULAR DIAGRAMS, WHERE NECESSARY TYPE ETC-SWM 5) SOFTWARE SUITABLE FOR EXPERIENCE ON D.C. MACHINES TYPE ETC-SWCC 6) SOFTWARE SUITABLE FOR EXPERIENCE ON ALTERNATOR TYPE ETC-SWMS 7) SOFTWARE FOR ELECTRICAL MAINS AND HARMONICS TYPE ETC-SWAR




Ver 04.15

ELECTRICAL MACHINESTRAINER

REMOVABLE ELECTRICAL MACHINE SYSTEM TYPE A43.00 This Trainer consists of a set of modular components that can be assembled in different configurations to construct most rotating machines such as: − 2 and 4 poles AC squirrel cage motor − 2 poles AC slip ring motor − Single phase AC capacitor motor − Single phase AC repulsion motor − AC synchronous motor − AC synchronous generator − AC/DC universal motor − DC series excitation machine − DC shunt excitation machine − DC compound excitation machine − DC independent excitation machine The components are: − One AC stator − One DC stator − One squirrel cage rotor − One slip ring rotor and brush set − One collector rotor and brush set − One starting capacitor − Coupling base − Safety guard The stators are permanently mounted on a coupling base on which four supports hold the rotors and brush sets. The supports are fastened by means of knobs that can be easily removed without the need of any tool, to exchange the rotors and brushes and implement the desired configuration. A compact and integrated laboratory is made available to perform most experiments and tests on standard electrical machines. The advantages are obviously its lower cost compared to that of a set of discrete machines, their modularity and, owing to the complete visibility of the components, the possibility for the student to learn the electrical and mechanical details. The windings are connected to terminal boards on top of which they are clearly identified by drawings that show the internal logic and make their understanding and connections easy in the different possible combinations. The synchronous machine is in all respect a real implementation and not a simulated function of the asynchronous unit. A brake generator can be easily connected coaxial to the trainer for performing load tests. A manual supplied with the unit describes in detail the electrical connections and the mechanical assembling procedure

TECHNICAL DATA

OPTIONAL UNITS A4S Electrical Machines Training System (*) A0240 Power supply A4430 Brake Generator A4725 Digital RPM Hand Meter A4630 Excitation Rheostat A4810 Paralleling Board A4890 Set of cables A4891 Cables support

The unit allows the students to perform a range of experiments such as: Disassembling and assembling No-load tests Short circuit tests Nominal load and overload tests External characteristics Excitation characteristics Determination of efficiency Speed control Different starting methods AC and DC generation Paralleling of AC generators Power factor control

(*) 60 Hz version available on request (**) When AC generator

Input Voltage Output Voltage

Approx. RPM

Excitation Voltage

Approx. Power

AC Unit

220 to 240 V 380 to 415 V

3 /1 phase 50 Hz (*)

- 1,500/3,000 - 300 W

DC Unit 220 V DC 220 V DC 220 VAC (**) 3,000 220 VDC 300 W

ORDERING CODES A4300 - 50 Hz Trainer A4300A - 60 Hz Trainer

Load Modules (**) Measuring Modules (**) Work Table (**) Trolley (**) (*) It includes a suggested set of machines, instruments and accessories required to set-up an electrical machines laboratory (**) See SAMAR general Catalogue




Ver 04.15

A4220 - SQUIRREL CAGE THREE PHASE MOTORS This is a series of educational motors that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections that can be configured for STAR or DELTA schemes. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other machines or with a brake.

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to fasten the motor to the coupling base (or to the Universal coupling base, to be specified when ordering) . They are required when the motor is to be coupled to a brake or other machines. A42DS Double shaft A42FS Fault simulator. The ends of the stator windings are connected to a series of switches hidden inside a box installed between the motor casting and the terminal board. Through the switches the windings are then connected to the standard connectors on the board. The instructor activates the switches to simulate faults and assigns to the student the task of analyzing and explaining them. The following faults can be simulated: Open windings - Shorts between windings - Poor insulation of windings

The motor is supplied with a manual explaining the feasible faults and the corresponding switch settings

OPTIONAL UNITS Power supply Brake Generator Star-Delta starter Coupling base Flywheel Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley A4220C – SQUIRREL CAGE CUTAWAY VERSION The windings and the mechanical parts are perfectly visible so allowing the student to have a good knowledge of the manufacturing techniques. They are mounted on a base 28 x 32 cm approx. The dimensions of the machines are suitable to see the internal construction.

TECHNICAL AND ORDERING INFORMATION

Model N. Input Voltage

Volts (∆/Y) Freq.

Hz Nominal Speed Approx. RPM*

Nominal Power Approx. KW

A4220S 220/380** 50 3.000 0,2*** A4220AS 127/220 60 3.600 0,2*** A4220M 220/380** 50 3.000 1,1 A4220AM 127/220 60 3.600 1,1 A4220L 220/380** 50 3.000 3,0 A4220AL 127/220 60 3.600 3,0 Industrial version is available. Add I to Model Number Kit versions are available. Add K to Model Number Cutaway models are available. Add C to Model Number * Four Poles Motors are available. Add 4 to Model N. (Ex. A4220AS/4) ** 230/400V and 240/415V are available. Specify on order *** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request. NOTE: Powers are indicative and reflect the ranges of the industry standards.

TYPICAL EXPERIMENTS Measurement of winding resistance Short circuit test No-Load test Efficiency determination External characteristics STAR-DELTA starting




Ver 04.15

A4222 - SLIP RING THREE PHASE MOTORS This is a series of educational motors that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are

connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The stator can be configured for STAR or DELTA schemes. The motor can work as a squirrel cage if the rotor brushes are short-circuited. The units can be supplied with an experiment manual, which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to fasten the motor to the coupling base (or to the Universal coupling base, to be specified when ordering). They are required when the motor is to be coupled to a brake or other machines A42DS Double shaft OPTIONAL UNITS Power supply Brake Generator Rotoric Starter Coupling base Flywheel Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley A4222C – SLIP RING CUTAWAY VERSION The windings and the mechanical parts are perfectly visible so allowing the student to have a good knowledge of the manufacturing techniques. They are mounted on a base 28 x 32 cm approx. The dimensions of the machines are suitable to see the internal construction


Model N. Input Voltage Volts (∆/Y)

Freq. Hz

Nominal Speed Approx. RPM*


A4222S 220/380** 50 3.000 0,2*** A4222AS 127/220 60 3.600 0,2*** A4222M 220/380** 50 3.000 1,1 A4222AM 127/220 60 3.600 1,1 A4222L 220/380** 50 3.000 3,0 A4222AL 127/220 60 3.600 3,0 Industrial version is available. Add I to Model Number

Kit version is available. Add K to Model Number

Cutaway models are available. Add C to Model Number

* Four Poles Motors are available. Add 4 to Model N. (Ex. A42.22AS/4)

** 230/400V and 240/415V are available. Specify on order *** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request NOTE: Powers are indicative and reflect the ranges of the industry standards

TYPICAL EXPERIMENTS Measurement of Winding Resistance Short circuit test No-Load Test Efficiency determination External Characteristics




Ver 04.15

A4223 - SYNCHRONOUS THREE PHASE MACHINES This is a series of educational motors/generators that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The stator can be configured for STAR or DELTA schemes. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to fasten the motor to the coupling base (or to the Universal coupling base, to be specified when ordering) . They are required when the motor is to be coupled to a brake or other machines. A42DS Double shaft OPTIONAL UNITS Power supply Driving motor Brake Generator R-C-L Loads Excitation Rheostat Paralleling Board Coupling base Flywheel Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley A4223C – SYNCHRONOUS MACHINE CUTAWAY VERSION The windings and the mechanical parts are perfectly visible so allowing the student to have a good knowledge of the manufacturing techniques. They are mounted on a base 28 x 32 cm approx. The dimensions of the machines are suitable to see the internal construction


Model N. Motor Input Voltage

Generator Output Voltage Volts ∆/Y

Freq. Hz

Nominal Speed RPM


A4223S 220/380** 50 3.000 0,2***

A4223AS 127/220 60 3.600 0,2***

A4223M 220/380** 50 3.000 1,0

A4223AM 127/220 60 3.600 1,0

A4223L 220/380** 50 3.000 2,4

A4223AL 127/220 60 3.600 2,4

Industrial version is available. Add I to Model Number



* Four Poles Motors are available. Add 4 to Model N. (Ex. A42.23AS/4)

** 230/400V and 240/415V are available. Specify on order *** 0,1 - 0,3 - 0,5 and 3 KW are available and can be quoted on request NOTE: Powers are indicative and reflect the ranges of the industry standards

TYPICAL EXPERIMENTS Measurement of winding resistance Short circuit Test No-load test Efficiency determination External characteristics

OPTION: A4223-REG – ALTERNATOR VOLTAGE CONTROLLER The A4223 controller is designed to provide output voltage control and stabilization in AC generation sets. Its function is to monitor the alternator output voltage and provide a feedback signal in the form of a DC voltage suitable to drive the field inductor of the machine. Technical data of the Controller − AC mains input 220-240VAC, 50Hz − Controller output 150 to 230VDC approx., − 1A max Ability to work with Alternators providing 220V nominal per phase, regardless of the

alternator output connection scheme (Triangle for 220V-3p or Star for 380V-3p). − Ability to adjust the alternator voltage in the range of approx. 200 to 240V per phase by means

of a linear potentiometer − Ability to control the alternator voltage within approx. 1% in the range from no-load to full load

condition




Ver 04.15

A4224 - SQUIRREL CAGE DOUBLE SPEED THREE PHASE MOTORS equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The stator is wound in a Dahlander configuration (4 poles in DELTA and 2 poles in STAR schemes). The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other machines or with a brake. This is a series of educational motors that are basically industrial models especially

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to fasten the motor to the coupling base (or to the Universal coupling base, to be specified when ordering). They are required when the motor is to be coupled to a brake or other machines. A42DS Double shaft OPTIONAL UNITS Power supply Brake Generator Off-4-2 Poles switch Coupling base Flywheel Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley A4228 - RELUCTANCE MOTOR The reluctance motor is a single, split phase motor with a properly designed salient poles rotor. It starts as an induction motor reaching a speed close to synchronous and then it runs at synchronous speed. For education purposes the motor is equipped with a connection board with 4 mm terminals and silk printed diagram designed for clear understanding of the internal logic and connections. TECHNICAL DATA Power supply:220V, 50 Hz Approx. power:Fractional HP Speed:Approx. 3000 rpm (2 poles) / Approx. 1500 rpm (4 poles)


Model N. Input Voltage Volts

Freq. Hz

Nominal Speeds 2/4 Poles*

Approx. RPM


A4224S 380** 50 3.000/1.500 0,220/0,150***

A4224AS 220 60 3.600/1.800 0,220/0,150***

A4224M 380** 50 3.000/1.500 1,250/0,950

A4224AM 220 60 3.600/1.800 1,250/0,950

A4224L 380** 50 3.000/1.500 3,300/2,600

A4224AL 220 60 3.600/1.800 3,300/2,600




* Specify on order different number of Poles

** 400 or 415V are available. Specify on order *** 0,300/0,220 and 0,500/350 KW are available and can be quoted on request

TYPICAL EXPERIMENTS Measurement of winding resistance Short circuit test No-load test Efficiency Determination Speed change External characteristics




Ver 04.15

A4230 - SINGLE PHASE CAPACITOR RUN MOTORS This is a series of educational motors that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The rotor is a squirrel cage while the stator has two windings: the primary winding is directly connected to the power source while the auxiliary winding is normally connected in series to a capacitor and the series is paralleled to the primary winding for producing a rotating magnetic field. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other machines or with a brake

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to fasten the motor to the coupling base (or to the Universal coupling base, to be specified when ordering). They are required when the motor is to be coupled to a brake or other machines A42DS Double shaft OPTIONAL UNITS Power supply Brake Generator Coupling base Flywheel Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley A4230-ST – STARTER FOR SINGLE PHASE - SPLIT PHASE MOTORS The starter for single phase, split phase motors is a Module containing two capacitors (one Start Capacitor and one Start/Run Capacitor), one Resistor and one Inductance to be used individually, or in combination, to start the motor. The components are accessible through 4mm terminals and their values are chosen according to the power of the motor they will be connected to. Two control devices are also included: one current relay whose coil can be connected in series with the main winding of the motor to close a contact at start time and momentarily connect the start element chosen, and one pushbutton to manually perform the same operation. As shown in the picture, a clear silk printing on the panel face identifies the elements and allows their connection in different configurations, all of them based on the principle that a capacitor, a resistor or an inductance in series with the auxiliary winding will simulate a rotating magnetic field that is sufficient to start the motor. Once the motor is up to speed, the auxiliary winding, if not required by the amount of the torque to be developed, may be disconnected because the alternating field created by the main winding is sufficient to maintain the motor in rotation. The following main starting configurations may be implemented:

- Capacitor start - Capacitor start and run - Capacitor start and capacitor run (2 capacitors are used) - Resistor start - Inductance start - The above with manual control - The above with automatic control

Other combinations may be implemented for demonstration and training purposes. A manual is supplied with the unit to describe the basic connections and experiments.



Freq. Hz



A4230S 220** 50 3.000 0,2***

A4230AS 127 60 3.600 0,2***

A4230M 220** 50 3.000 1,1

A4230AM 127 60 3.600 1,1

A4230L 220** 50 3.000 2,5

A4230AL 127 60 3.600 2,5




* Half speeds (1.500 and 1.800) are available. Specify on Order.

** 230V and 240V or other voltages are available. Specify on Order *** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request NOTE: Powers are indicative and reflect the ranges of the industry standards

TYPICAL EXPERIMENTS Measurement of winding resistance Short circuit test No-load test Efficiency Determination External characteristics




Ver 04.15

A4232 - SINGLE PHASE CAPACITOR START MOTORS This is a series of educational motors that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The rotor is a squirrel cage while the stator has two windings: the primary winding is directly connected to the power source while the secondary winding is normally connected in series to a capacitor and the series is paralleled to the primary winding for producing a rotating magnetic field. A second capacitor is only used to start the motor and disconnected by a centrifugal switch when the motor is up to speed. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other machines or with a brake.

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to fasten the motor to the coupling base (or to the Universal coupling base, to be specified when ordering) . They are required when the motor is to be coupled to a brake or other machines. A42DS Double shaft

OPTIONAL UNITS Power supply Brake Generator Coupling base Flywheel Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley A4236 - REPULSION MOTOR The repulsion motor is a single phase motor with a collector rotor and short-circuited brushes. An alternating voltage applied to the stator, depending on the brushes position, induces an alternating voltage in the rotor winding. If the brushes are aligned to the neutral plane no current is induced and no torque is developed; if they are at 90° to the neutral plane, maximum current is induced but no torque is developed because the stator and rotor fluxes are in phase. If the brushes are at some intermediate position, a torque is developed which is at maximum value when they are at approximately 70°. Their optimum position can be determined experimentally. For education purposes the motor is equipped with a connection board with 4 mm terminals and silk printed diagram designed for clear understanding of the internal logic and connections TECHNICAL DATA Power supply 220V, 50 Hz Approx. power Fractional HP



Freq. Hz



A4232S 220** 50 3.000 0,2***

A4232AS 127 60 3.600 0,2***

A4232M 220** 50 3.000 1,1

A4232AM 127 60 3.600 1,1

A4232L 220** 50 3.000 2,5

A4232AL 127 60 3.600 2,5




* Half speeds (1.500 and 1.800) are available. Specify on Order.

** 230V and 240V are available. Specify on Order *** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request NOTE: Powers are indicative and reflect the ranges of the industry standards


FUNCTIONAL DIAGRAM A1 A2

A2 B1 B2 B2 C1 C2 C3 C4

A1 M




Ver 04.15

A4234 - SINGLE PHASE UNIVERSAL MOTORS This is a series of educational motors that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The stator has two poles and their windings are in series with the commutator rotor winding through its brushes. Can be powered both from AC or DC sources. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other machines or with a brake.

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to fasten the motor to the coupling base (or to the Universal coupling base, to be specified when ordering) . They are required when the motor is to be coupled to a brake or other machines. A42DS Double shaft

OPTIONAL UNITS Power supply Brake Generator Coupling base Flywheel Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley A4238S - SHADED POLES MOTOR The shaded poles motor is a single phase induction motor with two laminated poles on the stator and a squirrel cage rotor. The poles have a slot cut across the lamination and around one of the two parts a copper coil, called shading coil, is wound. The exciting winding is wound across the poles. When an AC source is applied to the poles windings the axis of the magnetic field shifts from the unshaded part to the shaded part of the poles thus inducing the rotor into a rotation. For education purposes the motor is equipped with a connection board with 4 mm terminals and silk printed diagram designed for clear understanding and connections.

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to fasten the motor to the coupling base (or to the Universal coupling base, to be specified when ordering) They are required when the motor is to be coupled to a brake or other machines. A42DS Double shaft OPTIONAL UNITS Power supply Brake Generator Coupling base Flywheel Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley


Model N. Input Voltage Volts AC or DC

Max. Freq.

Hz

Nominal Speed Approx. RPM


A4234S 220* 60 4.000 0,2**

A4234M 220* 60 4.000 0,4

Industrial version is available. Add I to Model Number Kit version is available. Add K to Model Number Cutaway models are available. Add C to Model Number * 230V and 240V are available. Specify on Order ** 0,1 and 0,3 KW are available and can be quoted on request


A1 A2 Poles Windings



Freq. Hz

Nominal Speed Approx. RPM


A4238S 220 50 3.000 Fractional HP

FUNCTIONAL DIAGRAM

TYPICAL EXPERIMENTS Measurement of winding resistance Short circuit test No-load test

M ≅




Ver 04.15

A4240 - DC COMPOUND EXCITATION MACHINES This is a series of educational motors/generators that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The machine has two excitation windings: one for series and one for shunt excitations. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other machines or with a brake.

OPTIONAL ACCESSORIES A42CO Coupling accessories, composed of a half coupling joint and all required hardware to secure the motor to the coupling base (or to the Universal coupling base, to be specified when ordering). They are required when the motor is to be coupled to a brake. A42DS Double shaft

OPTIONAL UNITS Power supply Driving motor Brake Generator Starting Rheostat Excitation Rheostat Coupling base Flywheel Tachogenerator Set of cables Cables support Measuring modules PC Interface accessories Working table or Trolley

AVAILABLE A4242 - DC SERIES EXCITATION MACHINES

A4244 - DC SHUNT EXCITATION MACHINES A4244C – DC SHUNT EXCITATION MACHINE CUTAWAY VERSION The windings and the mechanical parts are perfectly visible so allowing the student to have a good knowledge of the manufacturing techniques. They are mounted on a base 28 x 32 cm approx. The dimensions of the machines are suitable to see the internal construction.



Generator Output Voltage Volts DC*

Excitation Voltage

Volts DC*

Nominal Speed RPM**

Nominal Motor Power Approx. KW

A4240S 220 220 3.000 0,2***

A4240M 220 220 3.000 1,0

A4240L 220 220 3.000 3,0




* 230 or 240V or other voltages are available. Specify on Order.

** 1.500 RPM are available and can be quoted on request. Add 4 to Model N. *** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request. NOTE: Powers are indicative and reflect the ranges of the industry standards

TYPICAL EXPERIMENTS Winding Resistance Measurement No-Load Test Speed Control Nominal Load and Overload Test Magnetic Characteristics Electromechanical Characteristics




Ver 04.15

TRANSFORMERS A4110 - SINGLE PHASE TRANSFORMERS This is a series of educational transformers that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The primary windings have a central tap to make it possible to supply full or half of the nominal voltage. The secondary windings are implemented in two sections for separate use or, by connecting them in series, for cumulative output voltage. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines

OPTIONAL UNITS Power supply Resistive Load Capacitive Load Inductive Load Set of cables Cables support Measuring modules PC Data acquisition System Working Table or Trolley

SINGLE PHASE DEMOUNTABLE TRANSFORMER THREE PHASE DEMOUNTABLE TRANSFORMER SINGLE PHASE – THREE PHASE VARIABLE AUTOTRANSFORMERS


Model N. Primary Voltage Volts*

Freq. Hz

Secondary Voltage Volts*

Nominal Power Approx. KVA

A4110S 110+110 50/60 0-220 and 0-380 0,2**

A4110AS 63,5+63,5 50/60 0-127 and 0-220 0,2**

A4110M 110+110 50/60 0-220 and 0-380 1,0

A4110AM 63,5+63,5 50/60 0-127 and 0-220 1,0

A4110L 110+110 50/60 0-220 and 0-380 3,0

A4110AL 63,5+63,5 50/60 0-127 and 0-220 3,0


* Other Voltages can be specified on the order

** 0,1 - 0,3 and 0,5 KVA are available and can be quoted on request

Other Nominal Powers are available on request

TYPICAL EXPERIMENTS Transformer winding resistance measurement Transformer ratio measurement No-load test Short circuit test

On request other ranges




Ver 04.15

A4115 - THREE PHASE TRANSFORMERS This is a series of educational transformers that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The primary and secondary windings are both implemented in two identical sections that can be powered, and can supply, nominal or double voltages for added flexibility. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines.


Model N. Primary Voltage Volts*

Freq. Hz

Secondary Voltage Volts*

Nominal Power Approx. KVA

A4115S 110+110 50/60 190+190 0,2**

A4115AS 63,5+63,5 50/60 110+110 0,2**

A4115M 110+110 50/60 190+190 1,0

A4115AM 63,5+63,5 50/60 110+110 1,0

A4115L 110+110 50/60 190+190 3,0

A4115AL 63,5+63,5 50/60 110+110 3,0

Cutaway models are available. Add C to Model N

* Other Voltages can be specified on the order

** 0,1 - 0,3 and 0,5 KVA are available and can be quoted on request

Other Nominal Powers are available on request OPTIONAL UNITS Power supply Resistive Load Capacitive Load Inductive Load Set of cables Cables support Measuring modules PC Interface accessories Working Table or Trolley

A4130M - THREE PHASES PHASE SHIFTER This phase shifter is essentially an industrial slip ring motor to which a 360° rotating rotor lock has been added to vary the relative position of the rotor to the stator, and especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. This unit supplies a 220/380 three-phase output voltage and a phase shift of 0 to 360 electrical degrees between input and output voltages


Model N. Input Voltage Volts*

Freq. Hz Phase shift Output Voltage

Volts* Passing Power Approx. KVA

A4130M 380 50/60 0 - 360° 380 * * To be specified on the order

TYPICAL EXPERIMENTS Transformer winding resistance measurement Transformer ratio measurement No-load test Short circuit test

380 V 220 - 380 V 0° - 360°

PHASE SHIFTER




Ver 04.15

BRAKES A4410 - MAGNETIC POWER BRAKE This magnetic powder brake consists of a stator with an energising coil, an internal rotor and magnetic iron powder between them. The field generated by the current flowing in the coil "solidifies" the magnetic powder iron that mechanically connects the rotor to the stator with a force that is proportional to the amount of current. Therefore, by varying the energising current it is possible to vary the braking action. The torque may be displayed by the Torque Meter Model A4730 fitted with Load Cell Model A4731. Optional Arm Weights and Counterweights, Model A47AW, can be supplied if an electronic torque measurement is not available. OPTIONAL ACCESSORIES: A44AW Arms weights and counterweights OPTIONAL UNITS Power Supply Torque Meter Load Cell Coupling Base Set of Cables Cables Support PC Interface Accessories Working Table or Trolley

A4420 - EDDY CURRENT BRAKES This is a series of brake trainers specially designed for braking and measuring torque of all rotating machines in a school laboratory environment. They are equipped with 4mm terminals. The torque may be displayed by the Torque Meter Model. A4730 fitted with Load Cell Model A4731. Optional Arm Weights and Counterweights, Model A44AW, can be supplied if an electronic torque measurement is not available.

OPTIONAL ACCESSORIES: A42DS Double shaft A4280 Tachogenerator already mounted on the machine (or external, to be specified when ordering) A44AW Arms weights and counterweights A4840RL Rotor locker


Model N. A4410S (B650)

A4410M (B2500)

A4410L (B5000)

Maximum Torque, Nm 65 250 500 Nominal Voltage, V 24 24 24 Nominal Current, A 0.95 1.1 0.9 Coil Resistance at 20°C, Ω 24 22 27 Max. Dissipated Power, W 200 600 1600 Weight, Kg 6.5 32 59

TECHNICAL SPECIFICATIONS

Model N. Input Voltage Volts DC

Nominal Speed RPM*

Nominal Power Approx Kw

A4420S 0-90 3.000 0,3 A4420M 0-90 3.000 1,0 A4420L 0-90 3.000 3,0 * 1.500 RPM are available and can be quoted on request. Add 4 to model number

OPTIONAL UNITS: Power Supply Torque Meter Load Cell Coupling base Flywheel Set of cables Cables support PC Interface accessories Working table or Trolley




Ver 04.15

A4430 - BRAKING DC GENERATORS This is a series of brake generators trainers specially designed for braking and measuring torque of all rotating machines in a school laboratory environment. The units are very versatile and can also be used as DC Motors and Generators. They are equipped with an Educational Terminal Board with 4mm terminals and a clear synoptic showing the feasible connections. The torque may be displayed by the Torque Meter Model A4730 fitted with Load Cell Model A4731. Optional Arm Weights and Counterweights, Model A47AW, can be supplied if an electronic torque measurement is not available.

OPTIONAL ACCESSORIES: A42DS Double shaft

A44AW Arms weights and counterweights

A4430R - VARIABLE LOAD FOR BRAKE GENERATOR The brake generator load is a variable resistive load to be used with the brake generators. It is dedicated for this use and more simple compared with the series A45 loads.

Specifications Input Voltage 220V to 240 V Nominal power 300 W (series S) / 1200 W (series M) / 3600 W (series L)

OPTIONAL UNITS: Power Supply Resistive Load Excitation Rheostat Speed Meter Torque Meter Load Cell Coupling base Flywheel Set of cables Cables support PC Interface accessories Working table or Trolley

TECHNICAL SPECIFICATIONS

Model N. Output Voltage Volts DC*

Excitation Voltage Volts DC*

Nominal Speed RPM**

Nominal Power Approx. Kw***

A4430S 220 220 3.000 0,3 A4430M 220 220 3.000 1,0 A4430L 220 220 3.000 3,0 * 230 or 240V are available. Specify on Order. ** 1.500 RPM are available and can be quoted on request. Add 4 to model number *** 0,1 - 0,3 - 0,5 and 3,5 KW are available and can be quoted on request.. NOTE: Powers are indicative and reflect the ranges of the industry standards.




Ver 04.15

LOADS STANDARD RLC LOADS Dimensions: 1000 x 300 x 350 mm (type RLC) Available powers: 200 VA/VAR, 1000 VA/VAR, 3000 VA/VAR (on request different powers from the ones shown). Regulation by Step with separated powers on each phase Use: single-phase and three-phase, possibility of connection star / delta Nominal voltage 220/380 V Panel equipped with security clamps and synoptic AVAILABLE LOADS ONLY RESISTIVE OR ONLY CAPACITIVE OR ONLY INDUCTIVE Same powers and characteristic as the model described above. (on request custom executions)

RESISTIVE LOADS Available powers: 200 VA, 1000 VA, 3000 VA (on request different powers) Regulation by Step with separated powers on each phase Use: single-phase and three-phase, possibility of connection star / delta Nominal voltage 220/380 V Panel equipped with security clamps and synoptic

CAPACITIVE LOADS Available powers: 200 VAR, 1000 VAR, 3000 VAR (on request different powers) Regulation by Step with separated powers on each phase Use: single-phase and three-phase, possibility of connection star / delta Nominal voltage 220/380 V Panel equipped with security clamps and synoptic

INDUCTIVE LOADS Available powers: 200 VAR, 1000 VAR, 3000 VAR (on request different powers) Regulation by Step with separated powers on each phase Use: single-phase and three-phase, possibility of connection star / delta Nominal voltage 220/380 V Panel equipped with security clamps and synoptic

PROGRAMMABLE MONO AND THREE-PHASE RLC LOAD Type RLC/1K-P Dimensions: 1000 x 300 x 350 mm Weight: 20 Kg Three-phase load balanced with connection to star with neutral accessible suitable also for use in single-phase Maximum line tension 380 V with nominal power P = 1000 W with 4 steps each 250 W Qx = 1000 VAR 4 steps each 250 W Qc = 1000 VAR 4 steps each 250 W The load is supplied with manual/automatic switch and switches for the manual insertion of the elements R, L, C. On request various programmable power loads

OPTION trolley for loads

Comfortable and practical trolley to lodge loads of several types for easy and practical shifting Provided with housing for accessories. Several models and measurements are available. ON REQUEST SPECIAL LOADS OF SEVERAL POWERS AND DIMENSIONS A few examples:

- Load for tests on switches in compliance with IEC 1058-1 (simulates capacitive loads)

- Load for tests on switches in compliance with 1058-2 (simulates tungsten filament lamps)

- Load of ant inductive resistors for the discharge B.T lamp simulation.

- Load of ant inductive resistors for the discharge AT lamp simulation. (For luminous signboards)

- Capacitive load suitable for the test in field of the single-phase limiting device switches installed on the electric energy meters.




Ver 04.15

CONTROL ELECTRIC MOTORS

DC MOTOR CONTROL TYPE REG/CC ELECTRONIC MODULE OF SPEED ADJUSTMENT IN D.C. SYSTEM OF MOTOR CONTROL FOR D.C. COMPOSED BY SPEED CONTROL BOARD FOR SERVOMOTOR OF LATEST GENERATION Suitable for motor 200 W or 1KW Versions with different powers are available on request. Sizing of the actuator and of the motor in function of the dynamic characteristics of the load Speed control in open loop. Speed control for operation in armature feedback Speed control in closed loop .This is possible only by means of a d.c. motor with tacho generator with 10 V output at max speed (not included) Issues of stability and control PID parameters Drives and safety Drives and electromagnetic compatibility. Design to ensure compliance with EC Standards. Reduction of emissions through filters. Ramp speed control. Power supply: single-phase 230 V d.c Speed: 3000 rpm

A4240 - DC COMPOUND EXCITATION MACHINES This is a series of educational motors/generators that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections. The machine has two excitation windings: one for series and one for shunt excitations. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other machines or with a brake.

AVAILABLE A4242 - DC SERIES EXCITATION MACHINES A4244 - DC SHUNT EXCITATION MACHINES



Generator Output Voltage Volts DC*

Excitation Voltage

Volts DC*

Nominal Speed RPM**

Nominal Motor Power Approx. KW

A4240S 220 220 3.000 0,2***

A4240M 220 220 3.000 1,0




* 230 or 240V or other voltages are available. Specify on Order.

** 1.500 RPM are available and can be quoted on request. Add 4 to Model N. *** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request. NOTE: Powers are indicative and reflect the ranges of the industry standards




Ver 04.15

AC MOTOR CONTROL TYPE REG/CA ELECTRONIC MODULE OF SPEED ADJUSTMENT IN A.C. OPEN AND CLOSED LOOP System composed by an inverter of latest generation that is able to manage the motor in all its controls. The installation of the sensors on the motor is not necessary Suitable for motors of 200 W. Versions with different powers are available on request Experiences that can be made: Speed control motor in open loop by adjusting the supplied frequency.Speed control in open loop with the slip compensation. Self calibration (the converter automatically acquires the motor’s parameters) Speed control in closed loop (only with a.c. motor with tacho generator with 10 V output at max speed not included), PID parameter setting, issues of stability The motor to be tested is protected automatically: by means of current limitation and by means of thermal image. Braking by means of d.c. current Drives and safety cautions. Designing of safety system. Drives and electromagnetic compatibility. Design to ensure compliance with EC Standards. Reduction of emissions by filters. Ramp speed control. Supplied with RS-485 output and software. Power supply: three-phase 380 V The motor to be tested is protected automatically: by means of current limitation and by means of thermal image. Braking by means of d.c. current Drives and safety cautions. Designing of safety system. Drives and electromagnetic compatibility. Design to ensure compliance with EC Standards. Reduction of emissions by filters. Three-phase asynchronous cage motor (on request) Power 200 W -Speed 3000 rpm Star/delta connection

A4220 - SQUIRREL CAGE THREE PHASE MOTORS This is a series of educational motors that are basically industrial models especially equipped to be suitable for training. For this purpose the windings ends are connected to 4 mm safety sockets in a metal housing on top of which a clear electrical drawing shows the internal logic. The students can therefore easily understand operation and windings connections that can be configured for STAR or DELTA schemes. The units can be supplied with an experiment manual which explains typical exercises that can be executed on these machines. A comprehensive set of accessories and a joint allow easy and quick coupling with other machines or with a brake.


Model N. Input Voltage

Volts (∆/Y) Freq.

Hz Nominal Speed Approx. RPM*


A4220S 220/380** 50 3.000 0,2*** A4220AS 127/220 60 3.600 0,2*** A4220M 220/380** 50 3.000 1,1 A4220AM 127/220 60 3.600 1,1 Industrial version is available. Add I to Model Number Kit versions are available. Add K to Model Number Cutaway models are available. Add C to Model Number * Four Poles Motors are available. Add 4 to Model N. (Ex. A4220AS/4) ** 230/400V and 240/415V are available. Specify on order *** 0,1 - 0,3 and 0,5 KW are available and can be quoted on request. NOTE: Powers are indicative and reflect the ranges of the industry standards.




Ver 04.15

Brushless motor and control Didactic Kit that consists of a three-phase brushless motor with dedicated drive. The motor can be removed from the holder and mechanically coupled to a load. Max RPM: 4000 Rated Torque: 0.0625 Nm Maximum torque: 0.19 Nm The three-phase brushless motor has three stator windings connected in delta and comes complete with hall effect sensors that provide information on the position of the rotor. This type of motor has excellent torque characteristics, low inertia and possibility of strictly constant speed. For operation it is necessary to add only a stabilized power supply 30 V - 5 A, the kit comes complete with knobs, switches and cables.

B3510-W – LINEAR MOTOR The B3510-W module includes an on-board stepping linear actuator and the electronic drive circuit to allow the experimentation and investigation of the basic characteristics of the motor. The motor is provided with a position indicator, this facilitates the study of motor positioning, take-in point, loss of step. The electronic section includes a phase-signal generator and power drive stage. The motor can be operated manually in single-steps or sequentially from an on-board clock generator. The module also includes a PC data link for full remote operation. A software package is provided with the trainer for this purpose. The clear component layout and rugged construction renders this unit particularly ideal for the most demanding of classroom conditions. Features: Small-size linear motor; Power drive; Phase-signal generation from a PC through a data link; Manual operation in steps or continuous mode, by means of an on-board adjustable frequency generator. The B3510-W module comes complete with a connection cable kit, 2 software packages and an extensive instructions manual. Experiment and study subjects: Construction and functional characteristics of step-by-step motors; Full-step and half-step operation; Control diagram developing; Driver logic developing; Remote control; Operation at various speeds The B3510-W requires a +15 stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules. Optional accessories: Dual trace oscilloscope; multi-meter; Frequency meter

B3510-T – STEPPER MOTOR CONTROLS The B3510-T module includes the step-by-step motor and the electronic drive circuit, to enable the experimentation and investigation of the SXS control technique and the typical characteristics of these motors. The motor is provided with a shaft position indicator. This facilitates the study of motor positioning, take-in point, loss of step. The electronic section includes a phase-signal generator and power drive stage. The motor can be operated manually in single-steps or sequentially from an on-board clock generator. The module also includes a PC data link for full remote operation. A software package is provided with the trainer for this purpose. The clear component layout and rugged construction renders this unit particularly ideal for the most demanding of classroom conditions. Features: Small size step-by-step motor; Variable-frequency clock generator; Phase-signal generator; Manual or sequential operation; PC interface for remote operation The B3510-T module comes complete with a connection cable kit, 2 software packages and extensive instructions manual. The two software packages are respectively running under DOS and Windows operating systems, on IBM or compatible machines. Experiment and study subjects: Construction and functional characteristics of the step-by-step motor; Full and half step operation; Control diagram developing; Driver logic developing; Remote operation under PC control; Operation at various speed The B3510-T requires a +15 stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules. Optional accessories: Dual trace oscilloscope; multi-meter; Frequency meter




Ver 04.15

B3510-S – AC MOTOR CONTROL The B3510-S module includes an AC micro-motor and drive circuit. It is designed to allow the student to study the applications, principles and limitations of these transducers. The panel includes a variable-frequency, digital PWM sine/square signal generator that is used as a pilot signal for the power driver stage. The power driver stage produces the two voltages for the motor phases. An optical encoder is supplied to measure motor speed. The clear component layout and rugged construction renders this unit particularly ideal for the most demanding of classroom conditions. Features: Two-phase AC micro-motor; Variable-frequency clock generator; Digital sine/square signal generator; Pulse conditioners; Power output stages The B3510-S module comes complete with a connection cable kit and extensive instructions manual. Experiment and study subjects: The motor; Motor driving techniques; Timing generation stage; EPROM address generation; Synthesized wave shake; Operation of the drive with square-waves; Operation of the drive with sine-waves The B3510-S requires a +15, -15V stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules. Optional accessories: Dual trace oscilloscope; multi-meter; Frequency meter

B3510-G – DC MOTOR SPEED CONTROL The B3510-G module incorporates all the sub-systems necessary for the study of DC motor speed control in both open and closed-loop set-ups. The module has two small DC motors ganged together. One is used as the drive motor and the other as a tachometric generator. A slot-type optical feedback sensor is also mechanically ganged to a DC motor. The small motors ensure safe operation in all circumstances, this is important when the student has little experience. The clear component layout and rugged construction renders this unit particularly ideal for the most demanding of classroom conditions. Features: 2 small-size mechanically ganged DC motors. One of the two operates as a tachometric generator, or as a load; Slot-type optical sensor and encoder disk. This arrangement provides 8 pulses per motor revolution.; Frequency-to-voltage converter for the encoder signal; Tacho-generator signal conditioner; DC reference generator; Loop amplifier with adjustable gain; Switch mode power driver for the motor The B3510-G board comes complete with a connection cable kit and extensive instructions manual. Exercises and study subjects: Open and closed-loop speed control; Speed sensors: encoders and tacho-generators; Adjustment of gain in a closed-loop system; System response versus loop-gain; Operation of a power switch mode driver The B3510-G requires a +15, -15V stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules. Optional accessories: Dual trace oscilloscope; multi-meter

B3510-P – ROTATIONAL POSITION ENCODERS The B3510-P module is an educational version of an industrial type optical encoder. This allows the student to study the function and use of this type of device The clear component layout and rugged construction renders this unit particularly ideal for the most demanding of classroom conditions. Features: Hand-driven rotating transparent plastic disk, which has darkened (blinded) segments and sectors, that obscure a set of 5 phototransistors placed beneath the disk; The encoder is illuminated by a set of 5 LED lamps from above; Absolute decoder, with a 7-segments display; Relative decoder; Up/down step counting logic and display; Reset pushbutton; The relative encoder circuit is also equipped with step doubler and quadrupler and relevant display (micro steps) The B3510-P module comes complete with a connection cable kit and extensive instructions manual. Experiment and study subjects: The items of this module are of a quite general use in the industry. The student is made to become quickly acquainted with their principle of operation, characteristics and limits of use. The B3510-P requires a +15 stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules. Optional accessories: Dual trace oscilloscope; multi-meter




Ver 04.15

B3510-J – POSITION CONTROL This module includes a geared DC motor (approx. 1 revolution per second), which operates a screw-driven mechanism, ganged to the slide of a linear potentiometer. A second linear potentiometer allows the setting the reference position. This set-up enables the student to study the benefits and limitations of a closed-loop position control system. The clear component layout and rugged construction renders this unit particularly ideal for the most demanding of classroom conditions. Features: Mechanically simulated position system; Summing node for the reference and feedback signals; Loop amplifier, gain-adjustable; Power amplifier/DC driver; Power supply conditioner and control circuit The B3510-J module comes complete with a connection cable kit and extensive instructions manual. Experiments and study subjects: Characteristics of various transducers: linear potentiometer and gear motor; Set-up of a linear position control system; System response versus loop gain; Practical safety precautions for position systems: run limits, power supply control and motor switch off to prevent motor stall The B3510-J requires a +15, -15V stabilized power supply. The B4191 power supply is recommended, as for all the B3510 series modules. Optional accessories: Dual trace oscilloscope; multi-meter

APPLICATION WITH PLC

PLC AND SCADA ACQUISITION MODULE AND CONTROLS SCADA The system consists of data acquisition module and terminal boards with clear educational synoptic for easy wiring and programming. The kit includes: 1 Port COM RS23 - 1 port MiniUSB Processor NXP LPC2387 6 digital isolated input (1 counter 10 kHz) - 2 analog Input 0-10Vdc - 4 digital isolated Output Relè 1 expansion bus I2C High-speed, 16 digital input, 8 digital Output, 5 analog input, 4 analog output programming tool included, Programming cable 220/12 V Adapter Software Programming Ladder Diagram (LD), Instruction List (IL) / C language, SCADA SOFTWARE Option : • Touch screen LCD Display • Ethernet port for local network/internet connection • I/O simulator with switch push button and LEDS

possibility of using other PLC of your choice




Ver 04.15

Motor control simulator type CONTMOT / SIM Simulator for motor control panel with synoptic including : N. 4 contactors, N. 1 thermal relay, N. 4 signal lamps, N. 4 buttons (forward, reverse, stop, emergency), No 1 tachometer 3 ½ digits with sensor mounted on the motor with two selectable alarms, N. 1 Three-phase cage induction motor 42V - 200W, N. 1 three-phase transformer 380/42 V. It is required a PLC with at least 8 inputs and 8 outputs. The simulator allows to start the motor star / delta in rotation braking version. B3729-H – STAR/DELTA CIRCUIT The B3729-H simulator module replicates in a scaled and simplified manner the classic star-delta switching circuit. This system is often used in practice to start large AC electric motors with heavy loads. The principle is to initially connect the motor 3-phase windings in STAR mode, thus reducing the starting current. After a few seconds the connection is changed to DELTA and the motor can then accelerate the load to its full speed. The panel includes three pushbutton switches, which are available as inputs to the PLC. The simulated switching circuit consists of four power contactors, represented by the lighting of the four LED lamps positioned close to the symbol of the contactor on the front face of the unit. The LEDs are controlled by four assigned outputs of the PLC. The condition of the four contactors can be monitored by their respective auxiliary contacts indicated on the synoptic drawing. These contacts are available as inputs to the PLC. The result of the various operations performed by the PLC is indicated by the four LEDs situated in the lower part of the board. B3729-H is supplied with a Sample Program. The students can investigate the functions of the simulator using this program, and can also develop their own programs using the software supplied with the PLC MACHINE. The unit comes complete with a sample program and an extensive instructions manual. It can also be used with any suitable PLC machine, which may already be possessed by the teaching institute. The B3729-DX should be used as an interface in all cases.

B3729-I – ROTOR RESISTANCE STARTER CIRCUIT The B3729-I simulator module replicates in a scaled and simplified manner a rotor resistance starter circuit. This system is often used in practice to reduce the overload while starting and launching large AC asynchronous electric motors. These motors have the rotor made of a winding, creating a magnetic circuit. The winding is initially connected to a (relatively) high resistance, which is progressively reduced in steps to a null value (short circuit). Due to the properties of the magnetic interaction between rotor and stator, this reduces the current required for starting. The panel includes two pushbutton switches, which are available as inputs to the PLC. The simulated starter circuit consists of five power contactors, represented by the lighting of the five LED lamps positioned close to the symbol of the contactor on the front face. The LEDs are controlled by five assigned outputs of the PLC. The condition of the five contactors can be monitored by their respective auxiliary contacts indicated on the synoptic drawing. These contacts are available as inputs to the PLC. B3729-I is supplied with a Sample Program. The students can investigate the functions of the simulator using this program, and can also develop their own programs using the software supplied with the PLC MACHINE. The unit comes complete with a sample program and an extensive instructions manual.

B3601 – INDUSTRIAL ELECTRONICS TRAINER The trainer is conceived to present a review of the characteristics and use of important industrial devices for power handling/conversion, up to application examples of special interest in comprehensive manner. The trainer consists of a collection of box-like modules, 100 x 160 x 20mm size, with a magnetic base and a printed circuit board front face. The PCB face includes the components and devices needed to perform the experiments, with clear silkprint indicating the component symbols, identities and interconnections.For the execution of the experiments the modules are placed on a metallic Base plate (430 x 310 x 30mm) where they are retained by the magnetic strips. The connections to the power supply and to the measuring instruments is by plug-in cables. Certain experiments require more than a single module to be interconnected. This is also done by plug-in cables. The magnetic latching of the modules to the metallic Base plate ensures that the various items remain steadily fixed even if the Base plate is placed vertically, as in case of collective demonstrations by the Instructor. The trainer includes an Auxiliary Module with the low-voltage DC and AC sources required to perform the experiments. This module also includes resistive and inductive loads. All the experiment modules are designed to work from the low-voltages (18-36V AC and 15 to 48V DC) for increased safety. This makes the trainer especially suitable for use by students in their early stages of training, when they have not yet gained the confidence required to work on industry-standard high-voltage systems.

Features: Auxiliary module (with power supplies and loads). Base plate. 4-Diodes module. Capacitors module. 4-Thyristors module. Setpoint generator. 4-Pulse thyristor firing unit. Single-phase Burst AC controller. TRIAC application module. Self-commutation chopper. Temperature control module. Switching regulator module. PWM chopper/inverter. DC motor (permanent magnet type).

Study topics

Uncontrolled rectifiers: Half-wave rectifier. Half-wave rectifier with capacitor. Half-wave rectifier with inductive load. Half-wave rectifier with filter. Midpoint full-wave rectifier. Full-wave rectifier with capacitor. Full-wave rectifier with inductive load. Full-wave rectifier with filter. Diode bridge rectifier. Voltage doubler Controlled rectifiers: Half-wave controlled rectifier. Midpoint full-wave controlled rectifier. Controlled single-phase bridges. AC power control with thyristors. AC and DC power control with TRIAC Application examples: Temperature control. The AC burst controller. The temperature control module. Setup of a temperature control systems DC-DC conversion: The self-commutation chopper. The switching regulator. The PWM converter. The trainer is supplied with cable and accessories kit, Instructions Manual and storage case for the equipment modules

Note: Test instruments and electrical machines are to be ordered separately




Ver 04.15

POWER SYSTEM SIMULATOR PSS MODULE

This innovative system is composed by different autonomous simulators studied to work in serial connection or alone. With this system it is possible also to study the level of the quality of the electrical networks, harmonics and with implementation electrical and magnetic field at 50 and 60 Hz. The system is controlled with SCADA

This simulator includes:

! Module – GENERATION POWER GENERATION SIMULATOR

! Module – TRANSMISSION TRANSMISSION LINE SIMULATOR – HV

! Module – DISTRIBUTION DISTRIBUTION AND SUBSTATION SIMULATOR

! Module - PROTECTION SYSTEM UNIT MODULE RELAY TO BE USED WITH OTHER MODULES

! Module - ENERGY UTILIZATION STATIC AND DYNAMIC LOADS AND NETWORK EQUIVALENT, ALONG WITH ALARM

! SCADA (option) The system is controlled and displayed with SCADA

! PC WORKSTATION (option) to view and control the system using SCADA Power supply 230/400V 50Hz

The system is supplied in the solution that includes SCADA or without the control from SCADA

FOR DETAILS REQUIRE BROCHURE DEDICATED




Ver 04.15

CYCLE OF THE ENERGY AND QUALITY OF THE ELECTRIC ENERGY

Series of modules and instruction manuals with suggested experiences. The modules are equipped with points of measure through safety terminals to help the students during measurements and guarantee high level safety. The levels of voltage and power of the modules 1 … 6 are coordinated to allow the coupling of all the modules and allow the simulation and the study of the complete cycle of the energy.

MODULE 1: PRODUCTION OF THE ENERGY TYPE CE-PE/2 The module simulates a plant for the production of the energy. It is possible: parallel with the net, generation of active and reactive power. The production mechanism is faithfully simulated and does not need any rotating motors. It includes the principal electric protections of a plant and a multifunction instrument for measures.

MODULE 2: TRANSMISSION OF THE ENERGY TYPE SLE/2 The module simulates two high voltage lines. Study of the lines working at no-load and at load, change of voltage, voltage drops, losses in line, fluxes of active and reactive power, phasing, parallel connected lines. As option, it is available a kit for EMC study at 50 Hz.

MODULE 3: DISTRIBUTION OF THE ENERGY TYPE IDLE/3 The module simulates a medium voltage line. It includes power supply, line model, distribution transformer. Study of the line working at no-load and at load, change of voltage, voltage drops, losses in line, fluxes of active and reactive power, phasing. Analysis of convenience to carry energy at high voltage. As option, it is available a kit for EMC study at 50 Hz.

MODULE 4: PROTECTION RELAY TYPE RE/1 AND RE/2 RE/1 Protection of machinery and power lines from overload, short circuit, earth fault RE/2 Protection of lines and power transformers in radial and ring systems from undervoltage, overvoltage, overcurrent, residual overcurrent, residual overvoltage, maximum directional current, directional of earth fault, thermal image for lines and transformers.

MODULE 5: PHASE SHIFTING TRANSFORMER TYPE PST/1 Phase Shifting Transformer is a transformer that has an adjustable phase shifting between input and output. The active power flowing in a transmission line is proportional to the voltages on the sending and receiving side and to the sine of the electrical angle between both sides. The PST allows to control active power flow in parallel transmission lines changing the electrical angle between input and output. With SLE/2 and PST/1 the student can simulate a load flow problem shifting active power from the first line to the second.

MODULE 6: PARALLEL OPERATION OF ALTERNATOR The module includes alternator coupled to a.c. motor, inverter to adjust speed of the motor and dc power supply for excitation of alternator. The module allows synchronizing and parallel operation of rotating machine with infinite power bus. After the parallel operation it is possible to adjust mechanical power of the motor and excitation current of the alternator to generate and transfer to bus active and reactive power.




Ver 04.15

STUDY OF THE SINGLE AND THREE-PHASE ELECTRICAL PROTECTIONS TYPE SIC/EL/PROT SINGLE AND THREE-PHASE TEST - Test on protectors realized by means of fuses and determination of the trip time following currents. - Intervention of the protections by thermal relay - Intervention of the protections by magnetic relay - Intervention of the protections by residual current relay - Combination and coordination of types of protection previously mentioned up to

the definition of a thermo magnetic residual current protection - Use of this type of protection in the electrical distribution net. ACCESSORIES FOR ELECTRICAL PROTECTION KIT - THREE-PHASE ACCESSORY KIT Set of switches and three-pole contactors: - Three-pole electromagnetic switch Nominal current 32 A - Three-pole electromagnetic switch Nominal current 16 A - Three-pole electromagnetic switch Nominal current 25 A - Three-pole contactor with thermal relay in = 16 A - Three-phase differential switch In = 25 A I DIFF= 30 mA - N. 3 fuses and support - cable set - SINGLE PHASE ACCESSORY KIT Set of switches and contactors: - Bipolar electromagnetic switch Nominal current 32 A - Bipolar electromagnetic switch Nominal current 16 A - Bipolar electromagnetic switch Nominal current 25 A - Three-pole contactor with thermal relay In = 16 A - single phase differential switch In = 25 A I DIFF= 30 mA - N. 2 fuses and support - cable set - FRAME WORK OPTIONS: ANALYSIS OF ELECTRICAL NETWORK, POWER QUALITY, DISTURBANCE AND HARMONICS

TYPE KIT/ANALDIST The module studies and measures the quality of the electric energy, relief of the harmonicas, takes the relative corrective provisions to obtain acceptable wave forms for the good working of the electric and electronic equipment fed by the electrical network. It is possible: realization of the typical circuits, acquisition of the wave forms: voltage, current, evaluation of the harmonic distortions and the level of the disturbance, use of filters to simulate troubles or improve the situation after the analysis of the electric energy and the tracking of troubles.

EXTRANEOUS MASS

SIMULATOR

TIMER CHRONOMETER

SIMULATOR OF

BREAKDOWN TO THE GROUND

TROLLEY




Ver 04.15

RENEWABLE ENERGY

Series of didactic systems that uses natural, renewable sources to produce energy. Different solutions are proposed to teach the most common applications in various situations. Parts are supplied in kits and each system is described in user instruction/reference manuals. The systems are modular and can be integrated to make more complex arrangements.

• Photovoltaic: The sun light is converted into electricity • Solar Thermal: The energy of the sun rays is used to heat a fluid • Wind Power: The wind power is converted into the rotation of an electric generator • Hydroelectric System • Hydrogen Cell System

Series of modules and instruction manuals with suggested experiences. The modules are equipped with points of measure through safety terminals to help the students during measurements and guarantee high level safety.

PHOTOVOLTAIC PHOTOVOLTAIC MOUNTING BOX KIT 10 WATTS SOLAR CELLS TYPE SM10W The student can learn the basics of a simple photovoltaic system. It is possible to mount and dismount the trainer. A basic kit to produce electric energy for two lamps. Included: N.110W solar cells panel; N.2 fluorescent lamps; N.1battery with Ah sized for the system; N.1 charge regulator; Manual and suggested experiences. Cables and connectors are not included. The kit is available on request for powers up to 100W. Also available are the components mounted on modules for connection with standard 4mm cables. TRAINER SOLAR ENERGY TYPE KFV Set of instruments and components to study the main characteristics of solar radiation and of photovoltaic conversion process. Manual and suggested experiences. Complete program of experiences which enable students to learn the main characteristics of solar radiation and of photovoltaic conversion process. 1 pyranometer with bar for shadow projection. It includes : digital milliammeter and voltmeter, load rheostat, 3 different solar cells, portable compass, manual solar tracking system, accumulator, d.c. motor, solar ruler, user manual. Included experiences : study of radiation intensity with different inclinations of the solar meter, Calibrating the solar meter with the solar radiation, Plotting charts of daily diurnal insolation, for total, diffuse and direct radiation, on horizontal surface and on surface perpendicular to the sun rays and graphical and statistical results interpretations; assessing the current output of a solar cell by changing its orientation to the light source; experimental assessment of voltage-current curves of a silicon cell for different lighting values; assessing the maximum electric power output by a silicon cell for different lighting or insolation values; calculating the efficiency of a photovoltaic cell; Parallel and series connection of solar cells; calculation of the average power supplied by a silicon cell panel; battery recharge Included: N.1 professional solar meter; N.1 digital milliammeter with 3 ranges: 1 mA- 10mA – 100mA f.s.; N.1 digital voltammeter with 3 ranges: 1 V – 5V –10V f.s.; 0,1 - 0,5 – 1 A f.s.; N.1 load rheostat; N.4 silicon solar cells of standard and different dimensions; N.1 portable compass; N.1 solar tracking system and N.1 silicon solar panel; N.1 lead accumulator; N.1 d.c. motor; N.1 solar ruler; N.1 adjustable stand




Ver 04.15

SIMULATION OF PHOTOVOLTAIC SYSTEM TYPE KIT/SIM-IF The student can simulate the inputs parameters ( solar radiation, battery charge, ac power, solar panel angles, date and hour ) using analog potentiometers. The simulator calculates the output parameters like solar panel voltage and current, battery voltage and current, inverter input and output current and power. The output parameters are visible on four digits precision instruments. Fully configurable simulation software. The simulator requires PC connection via USB cableThis kit hardware + software to simulate accurately a photovoltaic plant of the "island" that includes virtually solar panels, control station, battery, inverter. The system is fully simulated using software algorithms. The simulator should necessarily be connected with a PC (supplied upon request). KIT / SIM-IF uses acquisition modules and digital instruments with USB / SERIAL. It simulates a plant with an installed capacity of 1500 W, corresponding to an area of about 15 m2 of panels with an efficiency of about 0.11. The open circuit voltage of the photovoltaic panels is 29.3 and the voltage at the point of maximum power is of 23.50 V. The inverter has a rated power of 1 kW and a rated power output of 0.95. The efficiency of the inverter decreases automatically for powers of less than 200 W or higher than 1kW. The simulator allows the introduction of data by means of potentiometers and display of system parameters using tools. It is required a connection to a personal computer, the simulation is run on the PC completely with the use of sophisticated algorithms. Included experiences: location Latitude and longitude; calculation of the position of the sun setting and the position of the panel; irradiance: it can adjust the radiation from zero to about 1200 W/m2; position panel: allows to set the orientation of the panel separately adjusting tilt and azimuth; calculation of the angle of incidence of sunlight on the panel (the angle between the direction perpendicular to the panel and the sun) ; calculation of solar power Ps from Ir irradiation, the surface of the Span panels, the performance of panels; calculation of the power and current required by the load; battery voltage buildup; calculation panel voltage and current panel; operation of the digital inputs. The simulator is equipped with 4 inputs: It enables operation system; switch Summer / Winter; Selector overcast / clear sky; break photovoltaic cell. Operation of the digital outputs. Calculation of performance Included: panel with clear synoptic that reproduces the photovoltaic system; Board for data acquisition and control of output signals to the actuators; PC connection via USB cable; N. 6 potentiometers to simulate the inputs: solar radiation, storage battery charge, power requested by users, panel inclination angle (referred to the horizontal surface), panel azimuth angle (referred to south direction), time of day, N.8 bar LEDs to simulate the outputs: photovoltaic panel voltage, panel output current, battery voltage, current supplied/absorbed by the battery, current absorbed by the inverter, solar power incident on the photovoltaic panel, power absorbed by users, system efficiency N. 4 switches to simulate the inputs: enabling system operation; season (summer/winter); clouded sky; breaking of a photovoltaic cell N. 3 LEDs to simulate the outputs: alarm for low charge level of the storage battery; alarm for inverter overload; battery in charging or discharging phase; Simulation program of photovoltaic system operation N. 8 digital displays

SIMULATOR TO STUDY OF THE CONVERSION OF RENEWABLE ENERGY TYPE EA/CONV This converter simulates the principle of an industrial design. The electric power supplied by a system of alternative energy is rectified by a Graetz bridge. This DC voltage is converted by a DC / AC 230V AC 50Hz. If the range is exceeded, the output of the converter disconnects instantly and illuminates a light indicator of an overload. A reset button restores the normal operation




Ver 04.15

PHOTOVOLTAIC SYSTEM TEACHING FOR THE STUDY OF SOLAR – stand-alone version TYPE SIMFVIS TYPE SIMFVIS/C (version on trolley)

The kit includes: • N.2 solar panels 12V 25W mounted on tilt stand to adjust the lighting angle and study the condition of maximum efficiency of panel • N.1 box with clear synoptic including: unit load regulator for solar panels; N.3 digital ammeter connected to the battery and load N.1 digital voltmeter connected to the load; N.1 digital voltmeter connected on solar panels • N.2 Batteries suitable plant for series and parallel connections • Adequate number of connecting cables The control unit incorporates a microprocessor which an algorithm "fuzzy" and of a self-learning process is able to optimize the operation of the system ensuring the proper feeding of the load and the correct sequence of charge / discharge of the batteries. The controller automatically recognizes the nominal battery voltage (12 or 24V). During the hours of exposure to the sun panels the electricity they produce is delivered to the load, maintained at nominal voltage. The excess energy goes to charge the battery. When the battery is fully charged the control unit interrupts the charging process avoiding the development of gas and damage to the battery itself. When solar energy is no longer sufficient to supply the load, control unit draws energy from the battery. The load is maintained at nominal voltage. The control unit is able to recognize the situation of weak battery. In the latter situation the battery is protected from deep discharge through detachment from the load. Regardless of the variation of the incident rays on the panels the control unit uses the battery in buffer to maintain constant voltage on the load. ALL OPERATION ARE WELL VISIBLE AND FULLY DOCUMENTED BY TEACHING PANEL CONTROL 16-character display to display the main parameters in a cyclic manner. Battery voltage, charge status, battery charge current, current to the load; POSSIBILITY OF SERIES OR PARALLEL CONNECTION PANEL AS A FUNCTION OF VOLTAGE LOAD RATED Opportunity to study: calculation of the average power developed by the sun in a particular location, characteristics of the photovoltaic cells, energy balance, performance of the system by means of special equipment with optional measuring solar radiation; series and parallel connections of photovoltaic panels, conversion and distribution storage energy, analysis of the use of energy system and measures the voltage and current and battery charging; lighting techniques, programming of the controller. OPTIONS

- lamps for indoor use photovoltaic panels - pyranometer, solar power meter or instrument certification for photovoltaic systems - acquisition tool for electrical parameters with numeric and graphic display interface and the APR / FR-ARM - inverter to obtain alternating current - software

OPTION FOR TYPE SIMFVIS / C WIND TURBINES 60W TYPE

SIMEOL60 Complete set up the trolley SIMFVIS

/ C Use the same unit and components

Type SIMFVIS

Type SIMFVIS/C side instruments

Type SIMFVIS/C side solar panel




Ver 04.15

GRID CONNECTED SOLAR SIMULATOR KIT TYPE SIMFVGC FOR THE STUDY OF SOLAR TECNOLOGY SYSTEM CONNECTED TO THE SIMULATED PUBLIC NETWORK This kit simulates a system connected to the public network, with provisions for compensation of the energy supplied to the grid. Instruments with USB interface. Trainer with solar panels to analyze the process of conversion of the solar energy in electric energy. The trainer includes: dc power supply signed Photovoltaic generator, inverter solar 'grid connected' power 200 W; N. 2 multifunction instruments for measuring voltage, current, electric power and energy at mains voltage; interface to the computer; modules for connection utilities; modules for dc voltage and dc current measurements; adjustable stand for modules; cables; software. Separate power supply allows to study DC/AC conversion and grid connection without use solar panels. On request computer interface Metal panel with pedestal on which are fixed the various components connected by standard laboratory cables. The kit includes: N.1 AC variable voltage steps signed photovoltaic generator N.1 solar inverter 'grid connected' power of 200 W N. 2 Multi-function meter for measuring voltage, current, power and energy. N.1 RS485A USB converter for interfacing instruments to computer N.1 module with two sockets for the connection of mains voltage loads N.1 module to measure voltage and current Tilt stand for mounting the modules cables Software Solar panels deliver DC voltage. When connecting several panels in series / parallel it is possible to reach voltages of tens of volts with high currents. In order to enter in the network and then sell the energy you need to convert AC voltage through an inverter. The inverter must also be able to engage in frequency and phase to the network (that is supposed to infinite power) delivering the power produced. In this type of system all the energy generated is fed instantly into the network, there is no accumulation with batteries. Normally, the PV system is connected to the network via a dedicated circuit, with counter and protective device independent from the home user. In case of absence of mains voltage the inverter stops and does not supply alternating voltage. This is required for safety reasons by the grid operator. Plants of this type can not be used as a reserve in the event of lack of electrical energy. In this kit the DC voltage, that normally in a real photovoltaic comes from the panels, it is generated by a power supply.

Available system to study: Parallel of photovoltaic system with a network Parallel of wind system with a network




Ver 04.15

PHOTOVOLTAIC INSTALLATION SOLAR PANEL AND TROLLEY Manual version for inclination control

SOLAR PANEL AND SOLAR TRACKER DOUBLE AXES AND CONTROL SOFTWARE With trolley The Cell Panel position is adjusted to the Sun position by a sun tracking apparatus controlled by a Personal Computer. You can combine it with wind power kit for use simultaneous or alternating TYPE KCFVIS200 azimuthal suitable for solar panels up to 200W solar tracking system based on the historical path of the sun when shown the latitude and longitude of the computer directs the solar panel according to the historical path of the sun from sunrise to sunset TYPE KCFVIS100 suitable for solar panels up to 100W solar tracking system based on sensor that follows the light OPTION: WIND TURBINES to match the photovoltaic kit for single or combined use




Ver 04.15

GRID CONNECTED SOLAR SIMULATOR TYPE KCGC TO COMBINE THE KIT FOR SOLAR PANEL / SOLAR TRACKER WITH TROLLEY SHOWN ABOVE (You can combine it with wind simulator kit for use simultaneous or alternating) It allows you to create your own solar power system from 250 watts. You have to connect the solar panel and insert the inverter directly into any electrical outlet housing.

MEASURE KIT INCLUDING: n. 2 modules bi-directional energy meters n. 1 module measures voltage and current of the solar panel n. 1 module 220V connection gried connected software control energy bill STAND ALONE PHOTOVOLTAIC SOLAR SIMULATOR TYPE KCISOL TO COMBINE THE KIT FOR SOLAR PANEL / SOLAR TRACKER WITH TROLLEY SHOWN ABOVE (can combine it with wind simulator kit for use simultaneous or alternating)

Included: CHARGE CONTROLLER, SOLAR STORAGE BATTERIES, INVERTER Pure sine wave, allow you to power with batteries DC (12V, 24V and 48V) any electronic equipment in AC 230V up to the rated power of the inverter. Digital microprocessor control guarantees high performance. Voltage: 24V Voltage range: 21-32V (max) Nominal power /30 min / peak: 300/350/650 W Efficiency: 94% Output voltage stabilized (230V + / - 5%, 50Hz + / - 0.05 %) Protection against short circuit and reverse polarity protection - Protection against overload, overheating and overcurrents. Disconnect automatic alarm in case of low battery THEORETICAL-EXPERIMENTAL MANUAL KIT SOLAR SYSTEMS WITH INTERFACE TYPE KFVI TO COMBINE THE KIT FOR SOLAR PANEL / SOLAR TRACKER WITH TROLLEY SHOWN ABOVE This system includes: charge controller, inverter, a solar storage batteries and some lamps designed to simulate the operation of a typical stand-alone photovoltaic equipment to transform solar energy into electric power through solar panel. The supervision system supplied, connected with a PC (offered upon request), allows to monitor the main electrical operational parameters, both in direct current (before the inverter) and in alternate current (after the inverter). Included experiences : Study of solar energy: calculation of the average power developed by the sun on a specific place; Silicon cells; Energy balance; Efficiency; Batteries charge control; Photovoltaic modules series and parallel connection; storage energy; Energy conversion and distribution; Typical applications. SOFTWARE: The data acquisition and supervision system and the use of a Personal Computer enable to: display the instantaneous power available at the generator outlet, at the storage battery outlet/inlet, at the inverter inlet, as well as the incident solar radiation on photovoltaic modules and the power thus generated, the conversion efficiency of solar energy; display on table the curves of the power generated by the system, of the power stored or supplied by the battery, and of the power feeding the inverter, versus time; plot by points the characteristic current–voltage curve and output power-voltage curve of photovoltaic generator, to store the collected data for future analyses and to compare various curves corresponding to different conditions; Moreover, the development software enables to modify the application programs supplied with the equipment and to create new customized applications, thus leading to learn and develop programming techniques. Furthermore, the remote measuring system of alternating current parameters enables to: display all the measures of these parameters, including peak and average values, in real time; display the trend of the values measured by the instrument, on a table; create a file of historical data; display the historical data on tables, or as graphic representation of the trend; create digital and graphic reports of energy consumptions on a flexible (daily, monthly, yearly) base; transfer the data of these reports to Excel for future analyses and examinations INCLUDED: DC voltmeter and DC ammeter with USB interface; Charge controller; Solar batteries; Inverter 300W; Photovoltaic panel with 2 modules, each one with 100 W peak power; Power supply: 230 Vac 50 Hz single-phase - 50 VA (Other voltage and frequency under request)

INPUT 250 Wp solar inverter Rated voltage 34 VDC 1x34 V 2 x 34 V MPP or MPP parallel or 2 x 17 V MPP serial Current 0-7 Adc. Rated power 6.6 Adc. Mppt voltage range 27 to 50 VDC

OUTPUT Max capacity 200 Watt output Rated voltage 230 VAC (-10% +5%) current range 0 to 1.1 Amp Nominal power 0.87 Amp Frequency of 50 Hz (+ / - 1%) cos.phi 1 MPP efficiency> 98%

OPTION " lamp for load with insertion by switches " pyranometer or complete instruments for certification photovolaic installations " digital instruments A-V- W-VAR- Wh- VARh- cosØ for single and threep-hase measurements type APR-FR/ARM2 with interface – software –

harmonics " inverter " software




Ver 04.15

WIND POWER GENERATOR KIT to match the photovoltaic kit for single or combined use TYPE SIMEOL400 This equipment represents the typical confi guration of a wind power generator, used to convert directly the wind kinetic energy into mechanical energy. Included experiences : Study of wind energy: calculation of the average power developed by the wind on a specific place; The wind power generator: typical structure; installation; orientation; “Brushless” generator; Study of the voltage regulator according to the variation of the wind speed and energy conversion; storing energy; Typical applications; charging batteries. Included: wind power generator 400W with trolley (on request 200W TYPE SIMEOL200) Rated power: 400 W Startup Wind Speed 3,6 m/s Rotor Diameter 1.17 m Voltage 24V (on request 12-48V) Turbine Controller Microprocessor-based smart internal regulator Body Cast aluminum Blades Injection-molded composite Alternator Permanent magnet brushless Electronic torque control Control panel containing: load regulator, digital ammeter, digital voltmeter, battery THEORETICAL-EXPERIMENTAL MANUAL OPTION; lamp for load with insertion by switches; digital instruments A-V- W-VAR- Wh- VARh- cosØ for single and three-phase measurements type APR-FR/ARM2 with interface – software – harmonics ; inverter; software, anemometer ; clamps

On request computer interface

SYSTEM FOR INDOOR OPERATION OF WIND POWER GENERATOR TYPE KEOLSIM Motor with speed regulator and adapter to be installed in place of the turbine blades for generator operation in windless environment. This system, coupled to an asynchronous motor, enables to power the wind turbine (which is not part of this system; the blades must be removed before use) indoors. Determining the power output by the turbine with the instruments. The system is supplied with an inverter for r.p.m. control of the motor.

OTHER VERSIONS same characteristics shown above but

TYPE SIMEOL90 wind power generator 90W with trolley

TYPE SIMEOL60 wind power generator 60W with trolley You can use 60W typical fan to simulate the wind

ON REQUEST wind tunnel for wind generator OPTION: Meteo kit

digital instruments A-V- W-VAR- Wh- VARh- cosØ for single and three-phase measurements type APR-FR/ARM2 with interface – software – harmonics




Ver 04.15

Energy saving kit type KRE Kit analysis and study of energy saving. Trainer kit to investigate and study the concepts of applications based on energy saving in industrial and residential systems. Includes: N. 1 Module with n.3 lamps E26 N. 1 Module simulation single-phase system N. 1 Module halogen lamp 230V 75W N. 1 Module incandescent lamp 230V 75W N. 1 Module fluorescent lamp and low-consumption light output equivalent to a 75W incandescent bulb Connection cables The kit proposes the study of energy saving applied to a lighting system. In particular compare a lighting system with traditional incandescent lamps and lamps "energy saving" low consumption. Both systems offer the same luminous flux (neglecting the color tone) and can be regarded as equivalent. The comparison will highlight the various technical aspects and costs. The module is a lighting dummy with an installed capacity of about 7500W (incandescent). OPTION: digital instruments A-V- W-VAR- Wh- VARh- cosØ for single and three-phase measurements type APR-FR/ARM2 with interface – software – harmonics

INSTRUMENTATION: DIGITAL LUXMETER DIGITAL THERMOMETER AND PROBE MULTIFUNCTION INSTRUMENT ENVIRONMENTAL: light sound humidity temperature DIGITAL MULTIMETER HANDHELD 3 ¾ digits Instrument test electrical continuity, connections between modules, grounding and surge of the type CT/1B Insulation tester

Digital wattmeter type SLD-E/WDM for use in DC and AC measurements for Pcc Digital wattmeter type SLD-E/WDM for use in DC and AC measurements for Pca pyranometer – solar power meter Anemometer clamps

SOLARIMETER - SOLAR POWER METER type SM / SPM 13 Measurement of sunlight up to 1999W / m2 or 634BTu / (ft2 • h) resolution 1W / m2; 1BTu / ft2 • h High accuracy and speed in response- Data hold function (DATA HOLD) Large display easy to read LCD 3 1/2 1999 counts - Range of choices units of W / m2 and BTU / (ft2 • h) Manual range selection - Direct reading without adjustments Value Max. And Min. Low battery indicator Multifunction instrument for testing photovoltaic systems and electrical power analysis complete with software, calibration certificate, bag, cables, solar meter, 4 clamps and grounding kits. Measures: AC and DC power, radiation and temperature are performed at the same time, simply press a button and wait for the result! All measured values are automatically entered in the formulas and will be calculated automatically side the success or failure of the test. In case of failure the instrument will indicate the cause of the failed test.

Peltier cell trainer This cell allows you to convert thermal energy into electrical energy, and vice versa. Box with 2 peltier cells and fan. Power supply , manual controller, n° 2 digital thermometers. User manual




Ver 04.15

NO PRESSURE THERMAL SOLAR SYSTEM WITH HEAT STORAGE FOR RESIDENTIAL HOUSE SPACE HEATING Solar heater is made of parallel rows of transparent glass tubes. Each tube contains a glass outer tube and metal absorber tube attached to a fin. The fin is covered with a coating that absorbs well solar energy, but which inhibits radiative heat loss. Air is removed from the space between the glass tubes and the metal tubes to form a vacuum, which eliminates conductive and convective heat loss. A well-insulated storage tank stores hot water. The system uses a pump to circulate household water through the collectors and into the home. The kit includes: n. 1 solar thermal panel made with glass tubes at a high vacuum tank with a capacity of 100 liters n. 1 floating barrel having the task of ensuring the complete filling of the tanks without additional pressure to atmospheric. n. 1 vent pipe U-folded with the task to let out the water when the volume increases as a result of heating. Outlet tap hot water Off valve to open / close the circuit of the radiator Circulator pump to the heating circuit Electronic control unit for controlling the pump Thermostat.

SOLAR WATER PUMPING STATION Type SM / POMPSOL Solar pumping station completely autonomous. The system allows students to understand and analyze its operation. Photovoltaic solar panel mounted on a chassis with variable inclination. Output terminals. Connecting cable. Tank that simulates the source of water under the ground. Transparent tank for water storage pumped. Tap that simulates the consumption of the user with the return water to the tank. Pump of adequate size. Batteries to power the pumping station when the sun is no longer present. Controller battery charge.

Miniature hydroelectric power generation with Pelton turbine, pump and instruments. Computer wi-fi interface available. The trolley kit includes: Stainless steel tank capacity 140 liters Pelton turbine with generator electric pump Variable speed drive for electric Flow Transmitter Pressure transducer n. 1 RF converter / USB to connect to the USB port of the PC n. 1 sinotticato panel comprising: switch differential thermal Emergency button Section adjusting power pump with switch START/STOP switch, ENABLE/RESET n. 5 digital instruments, with indications of turbine rotation speed, pressure, flow, output voltage, output current. The instruments are equipped with internal module for wireless data transmission Complete with software for experiences. OPTION: trolley for instruments and other accessories




Ver 04.15

HOME AUTOMATION SYSTEM FOR STUDY AND EXERCISES HOME AUTOMATION SYSTEM MODULAR STRUCTURE

RESIDENTIAL VERSION Simulator type DOMOCIV EIB-BUS SYSTEM (on request are also available proprietary systems, industrial systems, hotel and commercial systems) The traditional domestic electrical circuit is replaced by a programmable logic system that allows you to manage each user with flexibility and comfort unthinkable in a traditional system. The system transforms each command in a point of intelligent control capable of bringing together all those actions that are usually carried out separately. The simulator includes: - Frame with perforated plate stand with DIN rail for easy mounting of the modules (optional trolley for easy movements of the structure in the laboratory eventually with cabinet) - Software and system control KONNEX EI-BUS - Modules an insulating material with clear synoptic component for easy and immediate understanding of the function, component typical industrial leading brand mounted on the module and built for wiring safely. Complete rules terminals for wiring with the other modules by means of cables standard laboratory 4 mm with respect to the power line. For bus line terminals 2mm, for added security and protection against accidental connection with the power line. With this solution you can not make mistakes in the wiring between the line power and BUS. System is flexible and expandable with future upgrades offered by the market without problems. - Wiring fixed on the frame, user manual and tutorials that help the user in performing the tests. STUDY PROGRAM: The system includes a series of modules each containing the industrial component mounted in a container with display diagram for the understanding of the use of the module and with standard terminals for easy wiring and ensure maximum safety. Possible to study the electrical installation of a home automation system BUS KONNEX of residential home. ADVANTAGE OF THE SYSTEM PROPOSED: students learn bus programming and also learns the wiring using different power cables (2 and 4 mm) that highlight the power line and the line BUS. The programming and wiring is a formative important points for the installation of an electrical installation. SET ENTRY: basic component necessary for the use of automation components required:

- N.1 MODULE Power type 90709 POWER ELECTRONIC SELF-PROTECTED 110V / 240V - 50 / 60Hz - IP20 - 320mA Output voltage 30 V dc +/- 2 V (SELV) type DOM001 / ALB electric module with data strip for connecting power supply and components

- N.1 MODULE interface USB type 90706B INTERFACE KNX/USB for PC connection type DOM002 / USB

- N. 1 MODULE INTERFACE CONTACT 4 CHANNEL EIB Type 90721

CONTROL LIGHTS SOCKETS ON/OFF N. 1 MODULE actuator general loads Type 90835 4 CHANNELS 10A PROGRAMMABLE INDIVIDUALLY type DOM 003 / TU 6 A 230 VAC for the activation of the users with bus coupler DIMMER N. 1 MODULE UNIVERSAL DIMMER ACTUATOR - EASY - 500 VA Type 90849 MODULE SIMULATOR N. 1 module setting various different scenes on 4 lamps type DOM099 / SCEN SENSOR BRIGHTNESS 'AND MOVEMENT N. 1 MODULO detector movement and brightness type 10756




Ver 04.15

Light-sensitive IR CONTROL ROLLING SHUTTERS N. 1 MODULE actuator for rolling shutters type 90851 n. 2 motors including - raise / lower buttons N. 1 MODULE rolling shutter miniaturized Included proximity sensor. HEATING AND AIR CONDITIONING N. 1 MODULE CHRONOTHERMOSTAT Type 10761 N. 2 MODULO THERMOSTAT Type 10763 TECHNICAL ALARMS N. 1 MODULE WATER SENSOR - TRANSMISSION IN RADIO FREQUENCY - BATTERY 9V Type 12718 + N. 1 MODULE WATER PRESENCE DETECTOR MODULE Type 10716 N. 1 MODULE METHANE GAS DETECTOR SET ANTI ANTI THEFT SYSTEMS SMARTPHONE AND TABLET CONTROL Type SM6500-113 N.1 MODULE gateway KNX connects Type SM6500-113 the KNX system to the IP network. MODULE 4 keypad buttons SOFTWARE KNX KONNEX




Ver 04.15

INDUSTRIAL BUILDING AUTOMATION Type DOMOIND

The simulator includes: - Frame with perforated plate stand with DIN rail for easy mounting of the modules (optional trolley for easy movements of the structure in the laboratory eventually with cabinet) - Software and system control - Modules an insulating material with clear synoptic component for easy and immediate understanding of the function, component typical industrial leading brand mounted on the module and built for wiring safely. Complete rules terminals for wiring with the other modules by means of cables standard laboratory 4 mm with respect to the power line. For bus line terminals 2mm, for added security and protection against accidental connection with the power line. With this solution you can not make mistakes in the wiring between the line power and BUS. System is flexible and expandable with future upgrades offered by the market without problems. - Wiring fixed on the frame, user manual and tutorials that help the user in performing the tests.

COMMERCIAL BUILDING AUTOMATION Type DOMOHOTEL The simulator includes: - Frame with perforated plate stand with DIN rail for easy mounting of the modules (optional trolley for easy movements of the structure in the laboratory eventually with cabinet) - Software and system control - Modules an insulating material with clear synoptic component for easy and immediate understanding of the function, component typical industrial leading brand mounted on the module and built for wiring safely. Complete rules terminals for wiring with the other modules by means of cables standard laboratory 4 mm with respect to the power line. For bus line terminals 2mm, for added security and protection against accidental connection with the power line. With this solution you can not make mistakes in the wiring between the line power and BUS. System is flexible and expandable with future upgrades offered by the market without problems. - Wiring fixed on the frame, user manual and tutorials that help the user in performing the tests. The traditional electrical system of a hotel is replaced by a programmable logic system that allows you to manage the hotel and rooms with a flexibility and comfort unthinkable in a traditional system. The system turns every command in a point of intelligent control capable of bringing together all those actions that are usually carried out separately. The system consists of: • a camera module • a room panel • a temperature sensor NTC • a transformer with 12V ~ secondary 5VA • an outdoor panel comprising a transponder reader for controlling access to the chamber and a series of LED signaling • a badge holder with active antenna integrated read




Ver 04.15

AUTOMATION see dedicated catalog

SENSORS - TRANSDUCTORS

SIMULATORS PLC CONTROLLED

ARDUINO RASPBERRY 3D PRINTER

PLC AND SCADA ACQUISITION MODULE AND CONTROLS SCADA The system consists of data acquisition module and terminal boards with clear educational synoptic for easy wiring and programming. The kit includes: 1 Port COM RS23 - 1 port MiniUSB Processor NXP LPC2387 6 digital isolated input (1 counter 10 kHz) - 2 analog Input 0-10Vdc - 4 digital isolated Output Relè 1 expansion bus I2C High-speed, 16 digital input, 8 digital Output, 5 analog input, 4 analog output programming tool included, Programming cable 220/12 V Adapter Software Programming Ladder Diagram (LD), Instruction List (IL) / C language, SCADA SOFTWARE Option : • Touch screen LCD Display • Ethernet port for local network/internet connection • I/O simulator with switch push button and LEDS




Ver 04.15

THERMOTRONICS see special dedicated documentation

HEATING - AIR CONDITION AND VENTILATION




Ver 04.15

DC AND AC POWER SUPPLIES On request customized versions - see special dedicated documentation

OSCILLOSCOPE see special dedicated documentation

GDS-3000 Series Name: Visual Persistence DSO, GDS-3000 Channel: 2, 4 Bandwidth: 500MHz, 350MHz, 250MHz, 150MHz Memory Depth: 25k points Model Name: GDS-3502, GDS-3352, GDS-3252, GDS-3152, GDS-3504, GDS-3354, GDS-3254, GDS-3154

GDS-2000A Series Name: Visual Persistence DSO, GDS-2000A Channel: 2, 4 Bandwidth: 300MHz, 200MHz, 100MHz, 70MHz Memory Depth: 2M points Model Name: GDS-2304A, GDS-2302A, GDS-2204A, GDS-2202A, GDS-2104A, GDS-2102A, GDS-2074A, GDS-2072A

GDS-2000E Series Name: Digital Storage Oscilloscope, GDS-2000E Channel: 2, 4 Bandwidth: 200MHz, 100MHz, 70MHz Memory Depth: 10M Model Name: GDS-2072E, GDS-2074E, GDS-2102E, GDS-2104E, GDS-2202E, GDS-2204E

GDS-1000A-U Series Name: Digital Storage Oscilloscope, GDS-1000A-U Channel: 2 Bandwidth: 150MHz, 100MHz, 70MHz Memory Depth: 1M points Model Name: GDS-1152A-U, GDS-1102A-U, GDS-1072A-U

anti-vandalism cover




Ver 04.15

GDS-1000-U Series Name: Digital Storage Oscilloscope, GDS-1000-U Channel: 2 Bandwidth: 100MHz, 70MHz, 50MHz Memory Depth: 25k points Model Name: GDS-1102-U, GDS-1072-U, GDS-1052-U

GBS-1000 Series Name: Digital Storage Oscilloscope, GBS-1000 Channel: 4 Bandwidth: 200MHz, 100MHz, 60MHz Memory Depth: 25k R/T Sampling Rate: 1GSa/s E/T Sampling Rate: 25GSa/s Model Name: GBS-1204, GBS-1104, GBS-1074

GDS-300/200 Series Name: Compact Oscilloscope, GDS-300/200 Channel: 2 Bandwidth: 70 / 100 / 200MHz Memory Depth: 5M / 1M R/T Sampling Rate: 1GSa/s Auto Measurement: 36 DMM Function: Yes Screen Size: 7" TFT LCD Interface: USB Device Model Name: GDS-320, GDS-310, GDS-307, GDS-220, GDS-210, GDS-207

GDS-122 Name: Handheld Oscilloscope, GDS-122 Channel: 2 Bandwidth: 20MHz Memory Depth: 6k Points/Channel R/T Sampling Rate: 100MSa/s Auto Measurement: 5 DMM Function: Yes Screen Size: 3.7" STN Color Interface: USB Device Model Name: GDS-122 Products

GRS-6000A Series Name: Real Time / Digital Storage Oscilloscope, GRS-6000A Channel: 2 Bandwidth: 50MHz, 30MHz Memory Depth: 2k Words/CH R/T Sampling Rate: 100MSa/s E/T Sampling Rate: 500MSa/s Interface: RS-232C Screen Size: 6" CRT Model Name: GRS-6052A, GRS-6032A




Ver 04.15

GOS-6100 Series Name: Analog Oscilloscope, GOS-6100 Channel: 2 Bandwidth: 100MHz Screen Size: 6" CRT Model Name: GOS-6112, GOS-6103, GOS-6103C GOS-653G & GOS-652G Name: Analog Oscilloscope, GOS-653G/652G Channel: 2 Bandwidth: 50MHz Screen Size: 6" CRT Model Name: GOS-653G, GOS-652G

GOS-635G & GOS-622G Name: Analog Oscilloscope, GOS-635G/622G Channel: 2 Bandwidth: 35MHz, 20MHz Screen Size: 6" CRT Model Name: GOS-635G, GOS-622G

GOS-630FC Name: Analog Oscilloscope, GOS-630FC Channel: 2 Bandwidth: 30MHz Screen Size: 6" CRT Model Name: GOS-630FC

GOS-620FG Name: Analog Oscilloscope, GOS-620FG Channel: 2 Bandwidth: 20MHz Screen Size: 6" CRT Model Name: GOS-620FG

GOS-630 & GOS-620 Name: Analog Oscilloscope, GOS-630/620 Channel: 2 Bandwidth: 30MHz, 20MHz Screen Size: 6" CRT Model Name: GOS-630, GOS-620

GDB-03 Name: Oscilloscope & Training Kit, GDB-03 Applicable models: GDS-3000, GDS-2000A Model Name: GDB-03




Ver 04.15

SPECTRUM ANALYZERS see dedicated catalog

GSP-9300 Name: Spectrum Analyzer, GSP-9300 Frequency Range: 9kHz ~ 3GHz Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset Amplitude Measurement Range: DANL to 30 dBm Display: 8.4 inchs Color TFT LCD with SVGA (800 x 600) Interface: USB Host/Device, RS-232C, GPIB(Option), MicroSD, Lan(LXI Standard), SVGA Output Model Name: GSP-9300 GSP-830 Name: Spectrum Analyzer, GSP-830 Frequency Range: 9kHz ~ 3GHz Phase Noise: -80dBc/Hz @1GHz, 20kHz offset Amplitude Measurement Range: -117dBm ~ +20dBm Display: 6.4 inchs Color TFT LCD with VGA (640 x 480) Interface: USB Host/Device, RS-232C, GPIB(Option), VGA Output Model Name: GSP-830 GSP-730 Name: Spectrum Analyzer, GSP-730 Frequency Range: 150kHz ~ 3GHz Phase Noise: -85dBc/Hz @1GHz, 500kHz offset Amplitude Measurement Range: -100dBm ~ +20dBm Display: 5.6 inchs Color TFT LCD with VGA (640 x 480) Interface: USB Host/Device, RS-232C, VGA Output Model Name: GSP-730

GSP-810 Name: Spectrum Analyzer, GSP-810 Frequency Range: 150kHz ~ 1GHz Phase Noise: -77dBc/Hz @ 1GHz 30kHz offset Amplitude Measurement Range: -100dBm~+20dBm Display: CRT Display, 8 x 10 graticule, 6-inch waveform screen Interface: RS-232C Model Name: GSP-810




Ver 04.15

FUNCTION GENERATORS

see dedicated catalog

ARBITRARY SERIES

AFG-3000 Series Name: Arbitrary Function Generator, AFG-3000 Analog Channel: 1 Frequency Range: 80MHz , 50MHz Sample Rate: 200MSa/s Vertical Resolution: 16 bits Memory Length: 1M points Model Name: AFG-3081, AFG-3051 AFG-2225 Name: Arbitrary Function Generator, AFG-2225 Analog Channel: 2 Frequency Range: 1μHz ~ 25MHz Sample Rate: 120MSa/s Vertical Resolution: 10-bit Memory Length: 4k points Model Name: AFG-2225

AFG-2100 & AFG-2000 Series Name: Arbitrary Function Generator, AFG-2100/2000 Analog Channel: 1 Frequency Range: 0.1Hz ~ 5/12/25 MHz Sample Rate: 20 MSa/s Vertical Resolution: 10-bit Memory Length: 4k points Model Name: AFG-2125, AFG-2112, AFG-2105, AFG-2025, AFG-2012, AFG-2005 AFG-200/100 Series Name: USB Arbitrary Function Generator, AFG-200/100 Analog Channel: 1 / 2 Frequency Range: 25MHz Frequency Resolution: 1uHz Sample Rate: 120 MSa/s Vertical Resolution: 10 bits Memory Length: 4k point Display: None Model Name: AFG-125, AFG-225, AFG-125P, AFG-225P




Ver 04.15

DDS SERIES FG-2100 & SFG-2000 Name: DDS Function Generator, SFG-2000 Analog Channel: 1 Frequency Range: 0.1Hz ~ 4/10MHz Frequency Resolution: 0.1Hz Display: 9 digits LED Model Name: SFG-2110, SFG-2010, SFG-2004 SFG-1000 Series Name: DDS Function Generator, SFG-1000 Analog Channel: 100MSa/s Frequency Range: 0.1Hz~3MHz Frequency Resolution: 0.1Hz Display: 6 digits LED Model Name: SFG-1003, SFG-1013

ANALOGIC SERIES GFG-3015 Name: Analog Function Generator, GFG-3015 Analog Channel: 1 Frequency Range: 0.01Hz~15MHz Display: 6 Digits Model Name: GFG-3015

GFG-8200A Series Name: Analog Function Generator, GFG-8200A Analog Channel: 1 Frequency Range: 0.3Hz ~ 3/5MHz Frequency Resolution: 0.1Hz Display: 6 digits LED Model Name: GFG-8255A, GFG-8250A, GFG-8219A, GFG-8217A, GFG-8216A, GFG-8215A

GFG-8020H Name: Analog Function Generator, GFG-8020H Analog Channel: 1 Frequency Resolution: 0.1Hz Frequency Range: 0.2Hz ~ 2MHz Display: 4 Digits LED Model Name: GFG-8020H

GFG-8015G Name: Analog Function Generator, GFG-8015G Analog Channel: 1 Frequency Range: 0.2Hz ~ 2MHz Frequency Resolution: 0.1Hz Display: No Display Model Name: GFG-8015G




Ver 04.15

MULTIMETER see dedicated catalog

GDM-8261A Name: 6 1/2 Digit Dual Measurement Multimeter, GDM-8261A Display: 6 1/2 Counts: 1,200,000 Counts Basic Accuracy: 0.0035% DCV Accuracy Interface: RS-232C/ USB Device/ GPIB/ LAN/ Digital I/O Model Name: GDM-8261A GDM-8255A Name: 5 1/2 Digit Dual Measurement Multimeter, GDM-8255A Display: 5 1/2 Counts: 199,999 Counts Basic Accuracy: 0.012% DCV Accuracy Interface: RS232 / USB Device / Digital I/O Model Name: GDM-8255A

GDM-8351 Name: 5 1/2 Digit Dual Measurement Multimeter, GDM-8351 Display: 5 1/2 Counts: 120,000 Counts Basic Accuracy: 0.012% DCV Accuracy Interface: RS232 / USB Device / Digital I/O Model Name: GDM-8351

GDM-8342 & GDM-8341 Name: 4 3/4 Digit Dual Measurement Multimeter, GDM-834x Display: 4 3/4 Counts: 50,000 counts Basic Accuracy: 0.02% DCV Accuracy Interface: USB Device/ USB Storage / GPIB Model Name: GDM-8342, GDM-8341

GDM-8245 Name: 4 3/4 Digit Dual Measurement Multimeter, GDM-8245 Display: 4 3/4 Counts: 50,000 counts Basic Accuracy: 0.03% DCV Accuracy Model Name: GDM-8245

GDM-8145 Name: 4 1/2 Digit Dual Measurement Multimeter, GDM-8145 Display: 4 1/2 Counts: 19,999 counts Basic Accuracy: 0.03% DCV Accuracy Model Name: GDM-8145




Ver 04.15

GDM-400 & GDM-300 Name: Handheld Digital Multimeter, GDM-400/300 Display: 4 1/2 ~ 3 1/2 Counts: 1999 ~ 22000 counts Basic Accuracy: 0.05% ~ 0.8% DCV Best Accuracy Interface: RS-232 (GDM-461/397/396) Model Name: GDM-461, GDM-452, GDM-397, GDM-360, GDM-398, GDM-357, GDM-350B

GCM-403 & GCM-407 Name: Digital Clamp Meter, GCM-403/407 Model Name: GCM-403, GCM-407

RLC MEASURES see dedicated catalog

LCR-8000G Series Name: Precision LCR Meter, LCR-8000G Frequency Range: 10 / 5 / 1 MHz Basic Accuracy: 0.1% Basic Accuracy Interface: RS232 / GPIB Model Name: LCR-8110G, LCR-8105G, LCR-8101G LCR-800 Series Name: Precision LCR Meter, LCR-800 Frequency Range: 200 / 100 / 10 / 2kHz Basic Accuracy: 0.05% ~ 0.1% Interface: RS232 or Handler Model Name: LCR-821, LCR-819, LCR-817, LCR-816, LCR-829, LCR-827, LCR-826

LCR-900 Series Name: Handheld LCR Meter, LCR-900 Frequency Range: 100Hz / 120Hz / 1kHz / 10kHz / 100kHz Basic Accuracy: 0.2% Basic Accuracy Interface: USB Model Name: LCR-916, LCR-915, LCR-914




Ver 04.15

MILLIOHMMETER GOM-802 Name: DC Milli-Ohm Meter, GOM-802 Display: 4 3/4 Counts: 30,000 Counts Basic Accuracy: 0.05% Best Accuracy Interface: Handler, Scan (same connector) Model Name: GOM-802

LOGIC PROBE GLP-1A Name: Logic Probe & Pulser, GLP-1A Model Type: Handheld Type Model Name: GLP-1A

FREQUENCIMETERS GFC-8270H & GFC-8131H Name: Intelligent Counter, GFC-8270H/8131H Model Type: Intelligent Counter Frequency Range: 0.01Hz ~ 2.7GHz / 1.3GHz Display: 8 Digits Display Model Name: GFC-8270H, GFC-8131H

GFC-8010H Name: Digital Frequency Counter, GFC-8010H Model Type: Digital Frequency Counter Frequency Range: 10Hz ~ 120MHz Display: 8 Digits Display Model Name: GFC-8010H

ACCESSORIES

CABLES INTERFACE

CABLES

PROBE

RF ACCESSORIES

BAGS

IC TESTER GUT-6000B Name: Bench-Top Digital IC Tester, GUT-6000B Test Function: Digital IC Tester Model Type: Desktop Type Model Name: GUT-6000B

IC TESTER GUT-6600A Name: Handheld Digital IC Tester, GUT-6600A Test Function: Digital IC Tester Model Type: Handheld Type Model Name: GUT-6600A

ELECTRIC ELECTRONIC LABORATORY SAMAR

Documents