Top Banner
M.Prasad Naidu MSc Medical Biochemistry, Ph.D.Research Scholar
66
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Electophorosis

M.Prasad NaiduMSc Medical Biochemistry,Ph.D.Research Scholar

Page 2: Electophorosis

ELECTROPHORESIS:

Electrophoresis use the migration of Charged Solutes or particles in liquid medium under the influence of an electric field.

Electrophoresis is widely used analytical technique for the seperation of biological molecules such as plasma proteins, lipo proteins,immunoglobulins,abnormal hemoglobins, genetic variants of transferrin and haptoglobins and isoenzymes

Page 3: Electophorosis

General Principle of electrophoresis:

This technique is used for the separation of charged particles.

Biological materials such as amino acids, peptides, proteins, nucleic acids posses ionizable groups and hence exist as charged molecules in solutions, either as cations (+vely charged) or anions(-vely charged) depending upon the pH of the medium,.

Page 4: Electophorosis

contdEven typical nonpolar substance such as

carbohydrates can be given charges by derivatization, for example as borate or phosphates.

These charged particles like cations move towards cathode(-vely charged electrode) and anions towards anode (+vely charged electrode) in an electric field.

Page 5: Electophorosis

The difference in Charge: Mass ratio (C/M) forms the basis for the differential migration of particles in an applied electric field. This forms the general principle of electrophoresis.

The Rate of migration of the charged particle depends on

The amount of net charge on the solution

The size and shape of the solute particles

The electrical gradient established in the solution

The pH of the solution

Particles of like charges move in an electric field on the basis of their net charge, size, and shape.

Page 6: Electophorosis

Description of technique

Instrumentation and Reagents

A schematic diagram of a conventional electrophoresis system is shown

Page 7: Electophorosis

Made of either platinum or carbon, the polarity of which is determined by the mode of connection to the power supply.The electrophoresis support On which separation takes place may contact the buffer directly, or by means of wicks Two buffer boxes 1. With baffle plates contain the buffer used in the process. Each buffer box contains an electrode.The entire apparatus is coveredTo minimize evaporation and protect the system and is powered by a direct current power supply.

Page 8: Electophorosis

Buffers:

The buffer serves as a multifunctional component in the electrophoretic process as it,

Carriers the applied current.

Establishes the pH at which electrophoresis is performed and

Determines the Electrical charge on the solute.

Page 9: Electophorosis
Page 10: Electophorosis
Page 11: Electophorosis

As the ionic strength of the buffer increases, the proportion of current carried by the buffer will increase and the share of the current carried by the sample will decrease, thus slowing down the rate of migration.

So always ionic strength of 0.05M is preferred for the separation of proteins, or lipoproteins in an electric field.

Page 12: Electophorosis

Support MediaThe Support Medium provides the matrix in which separation takes place.

Various types of support media are used in electrophoresis and vary from pure buffer solution in a capillary to insoluble gels (e.g., sheet, slabs, or columns of starch, agarose, or polyacrylamide) or membrances of cellulose acetate.

Page 13: Electophorosis

contdGels are cast in a solution of the same

buffer to be used in the procedure and may be used in a horizontal or vertical direction.

In either case, maximum resolution is achieved if the sample is applied in very fine starting zone.

Separation is based on difference in charge-to-=mass ratio of the proteins and, depending on the pore size of the medium.

Page 14: Electophorosis

Starch Gel and Cellulose Acetate:

Starch gel was the first material to be used as a support medium for electropheresis.

Because preparation of a reproducible starch gel is difficult, this medium is now rarely used in the clinical laboratory.

Cellulose acetate are seldom used in routine clinical applications.

Currently,agarose and polyacrylamide gels are the support media of choice for electrophoresis.

Page 15: Electophorosis

AgaroseAgarose is used in a agarose gel

electrophoresis (AGE) for the separation of 1.serum, urine, or cerebrospinal fluid (CSF) proteins, 2. Hemoglobin variants, 3. Isoenzymes, 4.lipoproteins, and 5. Other Substances.

Page 16: Electophorosis

Most routine procedure for AGE are carried out on commercially produced, prepacked microzone gels.

Operationally, 0.5 to 1.0 of agarose/DL of buffer provides a gel with suitable strength and good migration properties for proteins and DNA fragments in the range of 0.5 to 20.0 kbp (kilobase pairs)

Page 17: Electophorosis

PolyacrylamidePolyacrylamide is most useful for mixtures of

smaller DNA fragments The average pore size in a typical 7.5%

polyacrylamide gel is about 5nm(50A).

With polyacrylamide, proteins are separated, on the basis of both charge to mass ratio and molecular size, a phenomenon referred to as molecular sieving .

Page 18: Electophorosis

contd

Because of the potential carcinogenic character of acrylamide appropriate caution must be exercised when handling this material if gels are prepared manually

Page 19: Electophorosis

Automated Systems

Many laboratories are converting to automated system for electrophoresis, such as the helena SPIFE 3000 or the Sebia Hydragel-Hydrasys system.

They are capable of processing of 10 to 100 samples simultaneously.

Beckman Coulter Capillary Zone Electrophoresis (CZE) system permits simultaneous processing of seven sample by using multiple capillaries.

Page 20: Electophorosis

contd

Newer microchip based analyzers like the Agilent 2100 Bioanalyzer significantly miniaturize and increase the speed of the process for separating proteins, nucleic acids even entire cells.

Page 21: Electophorosis

GENERAL procedure:

General Operations performed in conventional electrophoreis include 1. Separation, 2.Staining 3.Detection, and 4. Quantification.

Separation:

To perform an electrophoretic separation, a hydrated support material such as precast microzone agarose or polyacrylamide, gel is blotted to remove excess buffer and then placed into the electrophoresis chamber.

Page 22: Electophorosis

contdCare should be taken that the gel has neither

excess liquid nor bubbles on it. Next the sample is added to the support and

it is placed in contact with buffer previously added to the electrode Chambers.

Electrophoresis is conducted for a determined length of time under conditions of either constant voltage or constant current

Page 23: Electophorosis

Staining:

When electrophoresis is completed, the support is removed from the electrophoresis cell and rapidly dried or placed in a fixative to prevent diffusion of sample components.

It is then stained to visualize the individual protein zone.

After washing out excess dye, the support is dried.

Page 24: Electophorosis

contdStains used to visualize the separated

protein fractions are differ according to type of application.

Most commercial methods for serum protein electrophoresis use Amido Black B or members of the Coomassie Brilliant Blue series of dyes for staining.

Silver nitrate or silver diamine has been used to stain proteins and polypeptides.

Page 25: Electophorosis
Page 26: Electophorosis

Detection and Quantification

Once electrophoretic separation and staining are complete, it is possible to quantify the individual zones either as a percentage of the total or as absolute concentration by direct densitometry, If the total protein concentration is known.

Page 27: Electophorosis

contd

In the densitometer, the gel (or other medium) is moved past a measuring optical system and the absorbance of each fraction is displayed on a recorder chart or an electronic display

Page 28: Electophorosis

Modern DNA analysis techniques, which may produce several dozen bands of different length DNA fragments require a new type of densitometer referred to as a flat bed scanner or digital image analyzer.

Page 29: Electophorosis

contdIn addition to scanning by densitometry,

electrophoresis gels are now being analyzed by mass spectrometers to determine the molecular weights of proteins and their cleavage products, and for peptide sequencing.

Page 30: Electophorosis

Types of Electrophoresis

There are mainly two types of Electrophoresis, 1. Vertical Electrophoresis 2. Horizontal Electrophoresis

Different types of support media are used in Horizontal Electrophoresis

Ex: Filter Paper , cellulose acetate agar gel, agarose gel, starch gel, etc.,

Page 31: Electophorosis

contd The Vertical Electrophoresismainly use

polyacrylamide gel, Depending upon the nature of

supporting medium. Agar gel Electrophoresis AGE)-where

agar gel is used as supporting medium. Polyacrylamide gel

Electrophoresis(PAGE). Acrylamide and methylene bisacry lamide forms a polymer in this case.

Cellulose acetate electrophoresis (Paper Strip Electrophoresis)

Where cellulose acetate paper serves as the supporting medium.

Page 32: Electophorosis

2. Depending upon the mode of the technique:

Slide gel Electrophoresis

Tube gel Electrophoresis

Disc Electrophoresis

Low and high voltage Electrophoresis

Page 33: Electophorosis

Zone Electrophoresis

Zone Electrophoresis techniques produce zone of proteins, which are heterogeneous and physically separated from one another as shown .

They are classified according to the type and structure of the support material used and are commonly referred to as AGE cellulose acetate electrophoresis (CAE) polyacrylamide gel Electrophoresis (PAGE)etc.,

Page 34: Electophorosis

contdIn 1934, consden introduced a simpler

Zone electrophoresis technique using filter paper as a supporting medium .

It uses an inert supporting like paper or gel. It is simple, routinely used and gives better resolution than moving boundary type.

A simple and modified method of moving boundary electrophoresis is the zone electrophoresis.

Page 35: Electophorosis

Various Types of Zone electrophoresis 1. Paper Electrophoresis 2. Gel Electrophoresis 3. Isoelectric Focusing 4. Cellulose acetate 5. Immunoelectrophoresis

Page 36: Electophorosis

Free or Moving Boundary Electrophoresis:

The Original moving boundary Electrohoresis system was devised by arne Tiselius in 1937.

Arne Tiselius was awarded nobel prize in 1948

Tiselius 1937 introduced this technique

This consists of a quartz U-shaped tube.

Page 37: Electophorosis

contdProtein in buffer (pH-8-6) is taken in it

and is layered with protein free buffer in both limbs of the tube.

Two electrodes are fitted in the two limbs of cell and joined to the battery.

When electric current is passed through the U-tube, the protein negatively charged migrate towards anode and their rate of migration is

Page 38: Electophorosis

Albumin>α1 Globulin> α2 Globulin>β Globulin>Gamma Globulin When current has flown through for 16 hours front edge of albumin has travelled considerably ahead of other proteins in the order given above. The position of the boundary for each protein can be determined by observing the change in refractive index. The refraction can be photographed in the form of so called electrophoretic pattern

Page 39: Electophorosis
Page 40: Electophorosis

contdSeparation only occurs at the

boundaries. The bulk of the protein remaining

homgenous. It is called moving or free boundary

because proteins move freely in solution.

This apparatus is complicated and costly and so was comparatively little used.

Page 41: Electophorosis

Paper Electrophoresis : The technique of paper electrophoresis is simple and inexpensive and requires only micro quantities of plasma for separation.

The electrophoresis apparatus in its simplest form consists of two troughs to contain buffer solution, through which electric current is passed.

Page 42: Electophorosis
Page 43: Electophorosis

The plasma under investigation is mixed with bromophenol blue, a blue coloured stain and spotted at the centre of a strip of special filter paper, saturated with an alkaline buffer solution. Barbitone Buffer of pH 8.6 is used. The centre of the filter paper is supported vertically over a glass rod. The ends of the paper dip in buffer solution contained in two troughs placed on either side of the glass rod. The entire system is covered with an airtight transparent lid.

.

Page 44: Electophorosis

An electric current of proper amperage and voltage is passed Across the paper, when the charged protein fractions bearing different charges migrate at different rates.

The moving boundary of the migrating proteins, stained blue can be seen moving towards anode.

Page 45: Electophorosis

contdAfter a run of about five to six hours,

the current is stopped and the separated fractions of plasma protein which lie in succession behind the moving boundary, are fixed in their places by heating the paper in an oven at 110 ‘c for half an hour.

The paper is then stained with a solution containing bromophenol blue.

Page 46: Electophorosis

The different fractions appear as blue coloured bands across the filter paper starting from the moving boundary backwards.

If a quantitative estimation is required for each fraction, the bands may be carefully cut and eluted, or the bands may be scanned optically in a densitometer.

In human plasma five different bands can be identified on paper electrophoresis

Page 47: Electophorosis
Page 48: Electophorosis

GEL ELECTROPHORESIS :

This technique involves the separation of molecules based on their size, in addition to the electrical charge. The movement of large olecules is slow in gel electrophoresis. Serum proteins can be separated to about 15 bands, instead of 5 bands on paper electrophoresis.

The gels commonly used in gel electrophoresis are agarose and Polyacrylamide, sodium dodecyl sulfate (SDS)

Page 49: Electophorosis

AGAR GEL ELECTROPHORESIS :

Slide Preparation About 1.4 ml of Warm (60 °c) agar solution (100

mg / 10 ml of Barbitone buffer) is delivered on a slide uniformly at room temperature and allowed to solidify. Chamber saturation

Twenty minutes before starting the experiment, both the buffer tanks of the electrophoretic chamber are filled with equal volume of 0.05 M barbitone uffer (pH8.6) and kept closed to saturate the chamber With solvent vapors.

Page 50: Electophorosis
Page 51: Electophorosis

Sample Application Small filter paper strip (Whatman

No :1, 1 X 5 mm ) Soaked in the Serum sample is kept on the slide perpendicular to the length of the slide Close towards the cathode and the chamber is closed.

Slide Projection and Wick Connection The slide prepared is kept in the

chamber and connected to buffer By means of filter paper strips (Wicks).

Page 52: Electophorosis

Application of Electric FieldThe electrophoretic chamber is

connected to a power pack (an Equipment used to alter or adjust the required current or voltage values).

The power pack is switched on and current is adjust so that 4 m Amp current Flows through each slide. The process has to be carried out for about 90-120 minutes.

Page 53: Electophorosis

contdFixing of Proteins The slides are kept immersed in

the absolute alcohol for about 20 Minutes to prevent the diffusion of separated proteins.

Staining The Slides are dried and kept

immersed in the Amidoschwartz 10B dye For about 5 minutes.

Page 54: Electophorosis

Destaining The Stained slides are washed with 3 %

acetic acid to clear the background and to see the protein bands clearly.

The dried slides can be preserved for a long time. Since the electrophoretic pattern of serum proteins in certain diseases vary markedly from a normal pattern it is of great diagnostic significance is several conditions like nephrosis, liver disease, multiple myeloma, gamma globulinemia and others.

Page 55: Electophorosis
Page 56: Electophorosis

Polyacrylamide gel electrophoresis (PAGE )

It is useful when high resolution is required. Addition of a detergent sodium dodecyl sulphate (SDS) makes it the convenient technique for separation of proteins and determination of their molecular weight, and also for separation of isoenzymes.

Polyacrylamide is employed for the determination of molecular weights of proteins in a popularly known electrophesis technique known as SDS-PAGE.

Page 57: Electophorosis

ISOELECTRIC FOCUSSING :

It is the improved type of electrophoresis.

It separates proteins Electrophoretically on the basis of their relative content of positively and negatively charged groups and isoelectric pH values.

It is useful for separation of isoenzymes and some proteins of biological Importance.

Page 58: Electophorosis

This technique is primarily based on the immobilization of the molecules at isoelectric pH during electrophoresis.

Stable pH gradients are set up (usually in a gel) covering the pH range to include the isoelectric points of the components in a mixture. As the electrophores is occurs, the molecules (say proteins ) migrate to positions corresponding to their isoelectic points , get immobilized and form sharp stationary bonds.

Page 59: Electophorosis

The gel blocks can be stained and identified.

By isoelectic focussing, serum Proteins can be separated to as many as 40 bands. Isoelectric focussing Can be conveniently used for the purification of proteins.

CELLULOSE ACETATE ELECTROPHORESIS :

The strips of cellulose acetate are used as supporting medium,Particularly in separation of variants of hemoglobin.

Page 60: Electophorosis

IMMUNOELECTROPHORESIS

Here antigenic proteins are separated by combining their electrophoretic migration with their precipitation by specific antibodies.This technique involues combination of the principles of Electrophoresis and immunological reactions.

Immunoelectrophoresis is useful for the analysis of complex mixtures of antigens and Antibodies.

Page 61: Electophorosis
Page 62: Electophorosis

The complex proteins of biological samples (say human serum) Are subjected to electrophoresis.

The antibody (antihuman immune Serum

from rabbit or horse ) is then applied in a trough parallel to the Electrophoretic separation.

The antibodies diffuse and, when they come In contact with antigens, Precipitation occurs, resulting in the formation Of precipitin bands which can be identified.

Page 63: Electophorosis

APPLICATION OF ELECTROPHORESISClinical diagnosis :

a. Separation of serum proteins : Different patterns are seen with different diseases.

For ex, in nephrotic syndrome, albumin and gamma Globulin bands are decreased while alpha-2 band is increased .

Page 64: Electophorosis

In multiple myeloma, there will be a ‘M’ band (paraprotein) in Gamma region or gamma-beta inter region.

b. Useful in separation of isoenzymes (LDH, ALP,CPK etc) in differential Diagnosis, hemoglobin variant (hemoglobino-pathies), lipoproteins (hyperlipoproteinemias).

Page 65: Electophorosis

2. SDS –PAGE : used for finding molecular weight of proteins and their Purification.

3. Separation and analysis of nucleotides and nucleic acids, DNA finger printing.

4. Hemoglobin separation

5. Lipoprotein separation and identification

6. Determination of molecular weight of proteins.

Page 66: Electophorosis