Business Address: 106 Vulcan St, Etobicoke, ON M9W1L2 Phone No. – 416-742-2777 Site - https://www.royturk.com/ Email ID – [email protected] Effective Methods to Check Your Pressure Washer Fuel It’s a good habit to check the fuel levels in a pressure washer to prevent it from abruptly stopping operations during the cleaning process. The best gas pressure washers make it easy for the user to identify low-pressure levels and quickly refuel them to keep them working. Here are some useful methods to use for checking your pressure water fuels. Refer To The User Manual Every machine is unique. An older machine may require a different amount of oil compared to the industry’s best gas pressure washer, which may have different oil requirements. For this reason, it’s crucial to the machine’s user manual from the specific pressure washer supplier. The user manual contains detailed information about the pump and contains the right procedure to check a machine's oil. Remember, it doesn’t help to carry out the procedure prescribed for a different machine on the currently available machine. Viewing Glass Levels After identifying the position of the viewing glass from the user manual, look for any marking, like a red dot or two parallel lines. These lines don’t say anything about the amount of oil. Rather, this is the amount of oil that’s required for the machine to operate effectively. On the other hand, keeping the oils up to or above this level is crucial.