High Quality Valves Built to Last ... Air / Vacuum Valves Butterfly Valves Check Valves Control Valves Gate Valves Plug Valves High Quality Valves Built to Last… Effective April 17 Many new Flomatic valve products in 2017 are now NSF/ANSI 61 certified. These products are marked with a NSF/ANSI 61 logo. rev. 3 Sept. 8, 2017
40
Embed
Effective April 17 - Quality Valves Manufactured in the US ... Price List.pdf · Gate Valves Plug Valves alves Built to Last… Effective April 17 Many new Flomatic valve products
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
High Quality Valves Built to Last ...
Air / Vacuum Valves
Butterfly Valves
Check Valves
Control Valves
Gate Valves
Plug Valves
High Quality Valves Built to Last…
Effective April 17
Many new Flomatic valve products in2017 are now NSF/ANSI 61 certified.These products are marked with a
High Quality Valves Built to Last... I www.flomatic.com
WH
AT’
S N
EW A
T
80
0.8
33
.20
40
• Model 888VFD – Wafer Style VFD CheckNew patent pending wafer check valve for use with variable-frequency drive (VFD)control pumps and booster pump package applications. The triple 8 valve is designedfor simple flange supported installation and will operate equally well in a vertical flowup or horizontal position. Also they have an exclusive patented wafer connection forANSI class 150#/300# connections. A unique patented feature of the valve allows itto be close coupled to a butterfly valve without a spool piece for full independentoperation of both valves. The double guided spring loaded poppet system maximizesefficiency and minimizes water hammer. All internal parts are easily field replaceableand poppet has standard EPDM seating, for a drip tight seal. The poppet assembly isdesigned for minimum flow loss with up to 60% more flow efficiency giving years oftrouble-free service under variable flow. Standard check valves have a minimum andmaximum flow characteristic design and will “chatter” and be noisy when a VFD goesto low flow, causing premature wear and eventual failure.
See Page: 11
• Model 80EVFD & 80SSVFD – A, B & C Tapped ValvesThese new tapped valves feature a patented VFD design with tappings of 1/8” and 1/4”for all types of water well accessories. The “A”, “B” & “C” taps allow for easy connectionof the pressure switch, pressure gauges and many other types of accessories. Thesevalves have very low head loss and noiseless operation. The valves have extra-largebosses that give more threads to ensure the fitting is secure. The male threaded end ofaccessories will not interfere with the check valve operation or poppet.
See Page: 3 & 9
• Model 100SSVFD – 304 Stainless Steel VFD CheckThese patented submersible pump check valves are specially designed mainlyfor use with variable-frequency drive (VFD) control submersible pumps and alsowork excellent with standard pump systems. The unique valve design minimizesflow losses with noiseless operation and reduces hydraulic shocks in the pumping system. An exclusive patented guided poppet system ensures that thevalve automatically adjusts noiselessly from high to very low flow rates whenthe VFD controlled pump rampdown. The model 100SSVFD has female threadedconnections and can be installed vertical or horizontal.
See Page: 9
VALVES BY TYPE
Air Release/ Vacuum Page Miniair®, Maxiair®, Wellair® 31 Comboair®, Sewair® Series 31,32 Backflush 32 Auto-Drain - Model 70 3 Auto-Vac® - Model 77 14
www.flomatic.com High Quality Valves Built to Last...
Go to www.flomatic.com and type the model number in the search Product/Site Search
80XBE - ENVIRO CHECK®body casting unleaded bronze
with two 1/4" tapped holes on the outlet side for pressure switchand gauge. This valve features a non-spin acetal poppet with aNITRILE (Buna-N) seal and stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
80CE - ENVIRO CHECK® body casting unleaded bronze.Control Center with four tappings; one 1/8" inlet side, two 1/4" out-let sides, one 1/8" outlet side with a brass plug. This valve featuresa non-spin acetal poppet with a NITRILE (Buna-N) seal and stain-less steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
applications. See 80DIX or 80DI-VFD for horizontal.
80BE - ENVIRO CHECK®body casting unleaded bronze with
two drilled and tapped holes; 1/8" inlet side and 1/4" outlet side.This valve features a non-spin acetal (3/4"- 2") or unleaded bronze( 21/2"- 4") poppet with a NITRILE (Buna-N) seal and stainlesssteel spring.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" 4050E .6 100 $ 55.55 1" 4051E 1 50 $ 64.64 11/4" 4052E 1.5 36 $ 78.78 11/2" 4053E 2.3 25 $ 103.00 2" 4054E 2.9 16 $ 159.0021/2"* 4055E* 6.3 $ 735.00 3"* 4056E* 13 $ 1,037.00 4"* 4057E* 25 $ 1,356.0080BE with 1/4" Tapped Holes on Both Ends SIZE PART NO. WGT. CASE QTY. LIST PRICE
80AE - ENVIRO CHECK® body casting unleaded bronze. Thisvalve features a non-spin acetal (3/4"- 2") or unleaded bronze (21/2"- 4") poppet with a NITRILE (Buna-N) seal and stainless steelspring and a 1/8" drilled and tapped hole on the inlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" 4040E .7 100 $ 53.53 1" 4041E 1.2 50 $ 59.59 11/4" 4042E 1.5 36 $ 79.79 11/2" 4043E 2.4 25 $ 97.97 2" 4044E 3 16 $ 157.0021/2"* 4045E* 6.4 $ 788.00 3"* 4046E* 13 $ 1,009.00 4"* 4047E* 25 $ 1,334.00 80AE with a 1/4" Tapped Hole on the Inlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE
* Unleaded bronze poppet, 21/2" and larger are recommended for vertical applications. See 80DIA for horizontal.
1
80ME - ENVIRO CHECK® body casting unleaded bronze. Thisvalve features a non-spin poppet, with a NITRILE (Buna-N) sealand stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4071E .7 50 $ 54.162"M x 2"F 4079E 2.5 16 $ 154.00
80AE Discount Code A80E Discount Code A
Patent and other patents pending
80E - ENVIRO CHECK® body casting unleaded bronze withthreaded female x female connection. This valve features a non-spin acetal (1/2"- 2") or unleaded bronze (21/2"- 4") poppet with aNITRILE (Buna-N) seal and a stainless steel spring.
* Pressure Max 200 PSI** Unleaded bronze poppet, 21/2" and larger are recommended for
vertical applications. See 80EVFD or 80DI-VFD for horizontal.
ALL VALVES HAVE LESS THAN 1 PSI CRACKING PRESSUREFOR HIGHER CRACKING PRESSURE SEE PAGE 7, Model 816HS
80CE Discount Code A
80XBE Discount Code A
80BE Discount Code A
www.flomatic.com
80ME Discount Code AEN
VIR
O C
HEC
K®
VA
LVES
8
00
.83
3.2
04
0
NOTE: ENVIRO CHECK WITH SS POPPET ADD "S"TO END OF PART # AND 10% TO LIST.
New NSF/ANSI 61Certified Valves
100% Made inU.S.A.
100DPE - ENVIRO CHECK® body. Dual purpose check valve,stainless steel spring and non-spin acetal poppet. 11/4" male and1" female threads on both ends with a NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4"M & 1"F 4231E 1.1 50 $ 56.09
100DPE Discount Code A
100E - ENVIRO CHECK® body casting unleaded bronze. Hexshaped for easy wrenching, this valve features a non-spin acetalpoppet with a NITRILE (Buna-N) seal and stainless steel spring.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
80HTE - ENVIRO CHECK® body with threaded female xfemale connections. Features a high temperature stainless steelpoppet and a VITON seal with a stainless steel spring. Ideal for hotwater applications.Temp Max: 400°F (150C) Pressure Max: 100 PSI*
* At high temps the pressure rating is derated to 100 PSI,valve will take higher pressure at lower temps.
80HTE Discount Code A
100XLE - ENVIRO CHECK® body casting unleaded bronze.Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainlesssteel spring. Features extra long threads for bell end PVC droppipe.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4201XLE 1 36 $ 57.5711/4"M x 11/4"F 4242XLE 1.5 36 $ 72.72 80MDI-VFD DUCTILE IRON2"M x 2"F 4084VFD 4.5 36 $ 223.00
See page 8 for stainless steel version
100XLE Discount Code A
High Quality Valves Built to Last... www.flomatic.com
70 - Auto-Drain- This 1” valve is available in stainless steel,and PVC. All internal parts are engineered composite, with astainless steel disc and resilient seat. Temp Max: 180°F (80C) Pressure Max: 400 PSI
5 PSI – open pressure – standardMATERIAL PART NO. CASE QTY. LIST PRICE
Note: 10 PSI spring require minimum 5 gpm to close. Forlower flows or long horizontal runs use standard 5 PSI.
100ME - ENVIRO CHECK® body casting unleaded bronze.Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steelspring.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4071E .7 50 $ 54.1611/4"M x 1"F* 4221LE* 1.4 50 $ 47.3211/4"M x 11/4"F 4242E 1.5 50 $ 59.8211/2"M x 11/4"F 4223E 1.5 36 $ 95.47
* Longer threads
New NSF/ANSI 61Certified Valves
VISIT OUR WEBSITE AT
www.flomatic.com
ENV
IRO
CH
ECK
®VA
LVES
80
0.8
33
.20
40
10 Reasons to Buy WCR Check valves
• Radiused valve seat
• Oversized Spring
• No Spin Poppet
• Stabilizing Popper
• Self Cleaning Seat
• Full Flow Design
• Custom Molded Valve Disc
• Stem-less Valve Design
• Low Headloss
• 100% Water Tested
• Flow-fin®
80XBEVFD-ENVIRO CHECK®- Body casting unleaded
bronze with threaded female x female connection. The valve fea-tures a high strength patented guide, poppet and spring with aNITRILE (Buna-N) seal. This valve has two ¼” tapped holes on theoutlet side for pressure switch and gauge.
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
80CEVFD-ENVIRO CHECK® - Body casting unleaded bronzewith threaded female x female connection. The valve features ahigh strength patented guide, poppet and spring with a NITRILE(Buna-N) seal. Control center with four tapping; one 1/8" inletside, two 1/4" outlet sides, one 1/8" outlet side with a brass plug.
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
bronze with threaded female x female connection. The valve fea-tures a high strength patented guide, poppet and spring with aNITRILE (Buna-N) seal. This valve has two drilled and tappedholes; 1/8" inlet side and 1/4" outlet side. Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
80AEVFD-ENVIRO CHECK® - Body casting unleaded bronzewith threaded female x female connection. The valve features ahigh strength patented guide, poppet and spring with a NITRILE(Buna-N) seal. This valve has a 1/8" drilled and tapped hole on theinlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4041EVFD 1.2 36 $ 68.68 11/4" 4042EVFD 1.5 36 $ 91.91 11/2" 4043EVFD 2.4 25 $ 113.12 80AE with a 1/4" Tapped Hole on the Inlet Side SIZE PART NO. WGT. CASE QTY. LIST PRICE
100MEVFD-ENVIRO CHECK® - Body casting unleadedbronze with threaded male x female connection. The valve fea-tures a high strength patented guide, poppet and spring with aNITRILE (Buna-N) seal.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4071EVFD .7 50 $ 62.6211/4"M x 1"F 4221EVFD 1.4 50 $ 54.5411/4"M x 11/4"F 4242EVFD 1.5 50 $ 69.6911/2"M x 11/4"F 4223EVFD 1.5 36 $110.09
80CEVFD Discount Code A
80BEVFD Discount Code A
www.flomatic.com
100MEVFD Discount Code A
80AEVFD Discount Code A
80XBEVFD Discount Code A
80EVFD/100EVFD-ENVIRO CHECK® - body castingunleaded bronze with threaded female x female connection. Thevalve features a high strength patented guide and poppet andspring with a NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. STYLE WGT. CASE QTY. LIST PRICE
MODEL 80DI-VFD SERIESWith Stainless Steel Guiding (2”-8”)
Features & Benefits• 20% - 30% lower Friction Loss • Noiseless Operation• Strong Ductile Iron Valve Body (SS see page 9)• Corrosion Resistant Internal Components• Longer pipe threads with lead-In section• Longer thread area (8 round optional)• Optional “Break-Off” Plug• NSF®/ANSI 61 approved
Materials• Valve body: Ductile Iron or 316SS (see page 10)• Valve Guide: 316 Stainless Steel (2” & 21/2” optional)• Follower: Ductile Iron or 316SS (see page 10)• Disc: Buna-N Nitrile (FDA approved)• Spring: 316 Stainless Steel
New additional sizes and models,see website for additional listings.
80DI-VFD Discount Code A
80DI8R-VFD - 8 Round Short Threads High strengthepoxy coated ductile iron patented body, poppet and guide with 8round short thread connection. Features a NITRILE (Buna-N) seal,with stainless steel shaft and a ductile iron poppet. Designed forvertical or horizontal applications.Temp Max: 180°F (80C) Pressure Max: 600 PSIShort Threads - consult factory for standard threads SIZE PART NO. WGT. LIST PRICE
To order break-off plug, add “PLG” to part number and add$100.00 to list price, $75.00 added for composite plug installedand add “PPLG” to end of part number.
80DI8R-VFD Discount Code A
80MDW-VFD DEEP WELL® - Epoxy coated carbon steelmale inlet x female outlet body. Metal to metal seat with stainlesssteel spring and stem with 8 Round or 8 Round short threads. Temp Max: 180°F Body Pressure Max: 4,400 PSI (API J55 tubing) SIZE PART NO. WGT. LIST PRICE
* OD 8rd EU (External-Upset) Tubing ** OD 8rd Male end short casing x female end long casing
To order break-off plug, add “PLG” to part number and add$100.00 to list price.
80MDW-VFD Discount Code A
NEW!
DU
CTILE IR
ON
CH
ECK
VA
LVES
80
0.8
33
.20
40
TheHeavyweightChampMade in U.S.A.
®
80DI-VFD - High strength epoxy coated ductile iron patentedbody, poppet and guide with threaded female x female NPT con-nection. Features a NITRILE (Buna-N) seal. Designed for verticalor horizontal applications.Temp Max: 180°F (80C) Pressure Max: 600 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
To order break-off plug, add “PLG” to part number and add$100.00 to list price, $75.00 added for composite plug installedand add “PPLG” to end of part number.
5
80DI- High strength epoxy coated ductile iron body, disc and follower with threaded female x female connection. Features aNITRILE (Buna-N) seal, stainless steel spring fasteners, and ductileiron poppet. 21/2" and larger are designed for vertical applica-tions. See 80DIX or VFD design for horizontal. Note: 1" through 11/2" features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI 1”–11/2"
600 PSI 2”-8” SIZE PART NO. WGT. CASE QTY. LIST PRICE
*Longer body with stainless steel seat, use break off plug76098-2.
To order break-off plug, add “PLG” to part number for 2”-8”and add $100.00 to list price, $75.00 added for composite pluginstalled and add “PPLG” to end of part number.
80DI Discount Code A
80DIX- High strength epoxy coated ductile iron body features adouble-guided ductile iron poppet. Designed for vertical and hori-zontal applications.Temp Max: 180°F (80C) Pressure Max: 400 PSI
To order with break-off plug, replace “DIX” with “XPL” in partnumber and add $100.00 to list price of valve, $75.00 addedfor composite plug installed and add “XPPLG” to end of partnumber.
See 80DI or 80DIVFD for high capacity flow.
100MDI- High strength epoxy coated ductile iron valve featuresmale threaded inlet and female threaded outlet. Ideal forsubmersible pumps.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE11/4"M x 1"F 4221LDI 1 $ 24.7511/4"M x 11/4"F* 4242LDI* 1.4 $ 35.352"M x 2"F 4084VFD 4.5 $ 223.21*Longer threads.
SIZE PART NO. BREAK OFF PLUG LIST PRICE 2" 76098-2 1/4" $ 65.24 2 1/2" 76098-3 3/8" $ 66.95 3" 76098-6 3/8" $ 67.19 4" 76098-7 3/8" $ 67.18 5"–8"* 76098* 3/8" $ 64.60 10"&12"* 76098-12* 3/8" $ 76.32 8" 76098-8 1/2" $ 70.70 10"&12" 76098-11 1/2" $ 85.85*After 2014, the 8”-12” valve plug hole increased from 3/8" to 1/2"
BREAK-OFF PLUG Discount Code A
80DI8R-8 Round Short Threads - High strength epoxycoated ductile iron body, disc and follower with threaded female xfemale 8 round short connection. Features a NITRILE (Buna-N)seal, stainless steel spring fasteners and ductile iron poppet.Designed for vertical applications.Temp Max: 180°F (80C) Pressure Max: 600 PSIShort Threads - consult factory for standard threads SIZE PART NO. WGT. LIST PRICE
To order with break-off plug, add “PLG” to part number for 3"-8" and add $100.00 to list price of valve, $75.00 added forcomposite plug installed and add “PPLG” to end of part number.
SIZE PART NO. WGT. LIST PRICE 3"–6" 76098P .1 $ 24.24
* One size fits all break-off is for 6” size valves and markedwhere to cut for smaller 3” & 4” size valves.
COMPOSITEBREAK-OFF PLUG Discount Code A
80DIX Discount Code A
80DIB- Standard high strength epoxy coated ductile iron bodywith 1/8" tapped hole on inlet side and 1/4" tapped hole on theoutlet side. Note: 1" through 11/2" features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY LIST PRICE
* 80DIX double guided poppet. Can be installed vertical or horizontal.
80DIA- Standard high strength epoxy coated ductile iron bodywith 1/8" tapped hole on the inlet side. Note: 1" through 11/2" features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
* 80DIX double guided poppet. Can be installed vertical or horizontal.
80DIA Discount Code A 80DIB Discount Code A
flomatic vfd
DU
CTI
LE I
RO
N C
HEC
K V
ALV
ES
80
0.8
33
.20
40
6
80DICLVFD- Ductile iron check valve incorporates grooved lock-ing type pipe connections called Certa-Lok®. Fusion epoxy coatedinside and out including poppet assembly, this valve is corrosionresistant and unleaded. High strength ductile iron body with stain-less steel spring and NITRILE (Buna-N) seal.Also available in all 316SS, Model 80S6CLVFD. See Page 10.
80MDICL- Ductile iron check valve uses groove lock type pipeconnection on outlet end, and male pipe thread for the inlet con-nection. Materials are the same as the 80DICL.
Certa-Lok® is a registered trademark with North AmericanSpecialty Products.
To order with break-off plug, add “PLG” to part number andadd $100.00 to list price of valve, $75.00 added for compositeplug installed and add “PPLG” to end of part number.*Not for horizontal installation. See 7938CLSVFD, 7938MCLSVFD,7937CLSVFD or 7937MCLSVFD.
80DI Turbo- Patented high efficiency ductile iron check valve.Threaded female x female connection. High strength ductile ironbody and poppet, stainless steel spring and screws, stainless steelshaft and with a NITRILE (Buna-N) Seal Disc. (No “O”-Ring Seals)Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE 10" 4091T 155 $ 6,111.00
80DI Turbo Discount Code A 80DICLVFD Discount Code A
82DP- Dual purpose compact ductile iron reduced ported checkvalve with male and female threads on both ends. High strengthductile iron body and poppet, with stainless steel spring and fasteners. Designed to fit into tight fitting wells.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE21/2" F & 3" M* 4094DP* 7 $ 328.253" F & 4" M 4095DP 10 $ 416.124" F & 5" M 4096DP 25 $ 784.775" F & 6" M 4097DP 51 $ 1,577.00
Same valve as 82, extra female (internal) threads.
Note: RESTRICTED FLOW - REDUCED PORTED, SEE VFD MODEL FOR FULLPORTED, HIGH FLOW DESIGN.
* Unleaded Bronze Poppet
82DP (replaces 82) Discount Code A
100% Fusion Bonded Epoxycoated with NSF/ANSI 61
approved powder with quality coating operation.
High Quality Valves Built to Last... www.flomatic.com
80MDI- High strength epoxy coated ductile iron valve featuresmale threaded inlet and female threaded outlet. Ideal forsubmersible pumps.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. LIST PRICE
3"M x 3"F 4083 14 $ 350.474"M x 4"F 4077 22 $ 472.685"M x 5"F* 4075VFD* 23 $ 833.256"M x 5"F 4087VFD 48 $ 1,129.00
To order with break-off plug, add “PLG” to part number for 4"-6" and add $100.00 to list price of valve,$75.00 added for composite plug installed and add “PPLG” toend of part number.
Note: RESTRICTED FLOW - REDUCED PORTED, VFD PART NUMBERS ARE FULL PORTED.
* Not offered with break-off plug. See VFD below.
80MDI Discount Code A
80MDI-VFD- High strength epoxy coated ductile iron body, high strength poppet and guide with threaded male x female NPTconnection. Features a NITRILE (Buna-N) seal, stainless steel shaft,and ductile iron poppet. Designed for vertical or horizontal appli-cations. Full ported valve.Temp Max: 180°F (80C) Pressure Max: 600 PSI SIZE PART NO. WGT. LIST PRICE
11/4"M x 1"F 4221DIVFD 1 $ 29.6911/4"M x 11/4"F 4242DIVFD 1.2 $ 42.422"M x 2"F* 4084VFD* 4 $ 223.002"M x 2"F 4084SVFD 4 $ 245.503"M x 3"F 4083VFD 14 $ 379.054"M x 4"F 4077VFD 22 $ 566.615"M x 5"F 4075VFD 23 $ 988.796"M x 5"F 4087VFD 48 $ 1,129.006"M x 6"F 4081VFD 50 $ 1,199.00To order with break-off plug, add “PLG” to part number and add $100.00 to list price of valve, $75.00 addedfor composite plug installed and add “PPLG” to end of partnumber.*Not for horizontal installation, see 4084SVFD.
80MDI-VFD Discount Code A82DI-VFD Discount Code A
82DI-VFD - High strength epoxy coated ductile iron body, poppet and stainless steel guide with threaded male x male con-nection. Features a NITRILE (Buna-N) seal, stainless steel shaft,and ductile iron poppet. Designed for vertical or horizontal appli-cations.Temp Max: 180°F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE
2"M x 2"M* 4093VFD* 6 $ 177.262"M x 2"M 4093SVFD 6 $ 196.953"M x 3"M 4094SVFD 6 $ 341.383"M x 3"M* 4094VFD* 6 $ 383.804"M x 4"M 4095VFD 12 $ 550.455"M x 5"M 4096VFD 27 $ 843.356"M x 6"M 4097VFD 40 $ 1,788.008"M x 8"M 4098VFD 63 $ 2,384.00To order with break-off plug, add “PLG” to part number and add $100.00 to list price of valve, $75.00 addedfor composite plug installed and add “PPLG” to end of partnumber.* Not for horizontal installation, see 4094SVFD & 4093SVFD.
80SL Slim Line® - Epoxy coated carbon Steel threaded valvebody with all 316 stainless steel internals. Nitrile nylon seal fea-tures a small OD body dimension.Temp Max: 200°F Pressure Max: 450 PSI
Consult factory for pricing and other end connections and body material options.
* Pressure & temp depended see website.816HS Discount Code B
816HS- Same body as Model 816 with heavy spring for highercracking pressure.SIZE PART NO. CRACKING PRESSURE LIST PRICE1” YV001110107-08 8 PSI $328.001” YV001110107-10 10 PSI $328.001” YV001110107-15 15 PSI $328.001” YV001110107-20 20 PSI $328.001” YV001110107-30 30 PSI $328.00Consult factory for pricing and other sizes and body materials.*Note: the last 2 digits are the weight of the spring.
816FL- All 316 stainless steel flanged “Y-Type” check valve.Patented Spring loaded, Teflon® soft-seated plunger, optionalencapsulated spring, with all 316SS internals.Temp Max: 450°F (230C)* Pressure Max: 600 PSI* X=1 FOR STAINLESS X=2 FOR CARBON STAINLESS CARBON SIZE PART NO. WGT. LIST PRICE LIST PRICE 1" YV0014-X-0100 5.5 $ 630.00 $ 571.0011/4" YV1254-X-0100 8 $ 791.00 $ 676.0011/2" YV0154-X-0100 10 $ 937.00 $ 779.00 2" YV0024-X-0100 15 $1,200.00 N/AConsult factory for pricing and other sizes and body materials.
812X WAFER STYLE CHECK VALVE- All 316 stainlesssteel, wafer connection ANSI 150/300. Metal to metal seating on812X model.Temp Max: -20° F (-30C) to 660° F (350C)*Pressure Max: Metal Seating 600 PSI*NSF/ANSI 61 Certified by IAPMO R&T, 2”-8”812X - No Flange Face Seal SIZE PART NO. WGT. LIST PRICE 1/2" 2420X .2 $ 89.00 3/4" 2421X .3 $ 118.00 1" 2422X .5 $ 138.00 11/4" 2423X .7 $ 182.00 11/2" 2424X 1.4 $ 269.00 2" 2425X 2.3 $ 313.00 21/2" 2426X 3.9 $ 372.00 3" 2427X 5.4 $ 472.00 4" 2428X 7.8 $ 629.00 5" 2429X 20 $ 2,305.00 6" 2430X 32 $ 2,909.00 8"** 2431X** 67 $ 5,050.00 8" 2432X 64 $ 5,500.00
*Consult factory for temp. & pressure rating. **230 PSI Max
812XT- All 316 stainless steel, threaded 3 piece check valve andbody. Metal to metal seating, teflon O-ring. 1 1/2"–8" availablewith NITRILE (Buna-N) or VITON seal, add 10% to list price. 2"–6"available with socket weld connection, add 25% to list.Temp Max: Metal Seating only 400°F (200C)* Pressure Max: 300 PSI*
80SSB - body is all 303 stainless steel one piece body with twodrilled and tapped holes; 1/8" inlet side and 1/4" outlet side.
80SSA Discount Code A
100MSS - All 303 stainless steel body, threaded female xfemale connection. Features a high strength delrin poppet, stain-less steel spring with a NITRILE (Buna-N) seal.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. CASE QTY. LIST PRICE3/4"M x 3/4"F* 4218SS* 100 $ 90.401"M x 1"F* 4220SS2VFD 50 $ 61.3211/4"M x 1"F** 4221LSS2(CAST)** 50 $ 51.5111/4"M x 11/4"F 4242SS2 (CAST) 50 $ 63.6311/4"M x11/4"F**4242LSS2(CAST)** 50 $ 65.35
80SS/100SS - All 303 stainless steel one piece body. Stainless steelspring with a NITRILE (Buna-N) seal. Threaded female x female connection.Temp Max: 180°F (80C) Pressure Max: 400 PSI
100XLSS - All 303 stainless steel. Hex shaped for easy wrench-ing, this valve features a non-spin acetal poppet, with a NITRILE(Buna-N) seal and stainless steel spring. Features extra longthreads for special bell end PVC pipe, with threaded male x femaleconnection.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4201XLSS2 1 36 $ 65.6511/4"M x 11/4"F 4242XLSS2 1.5 36 $ 80.80
80SS WITH A TAPS - All 303 stainless steel one piece body.This valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring with a 1/8" drilled and tapped holeon the inlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
80SSA with a 1/8" Tapped Hole on the Inlet Side
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4041SS2 1.2 50 $ 70.70 11/4" 4042SS2 1.5 36 $ 97.97 11/2" 4043SS2 2.4 25 $ 121.20 2" 4044SS2 3 16 $ 191.90 80SSA with a 1/4 " Tapped Hole on the Inlet Side
80SSXB - body is all 303 stainless steel one piece body withtwo 1/4" tapped holes on outlet side for pressure switch andgauge. This valve features a non-spin acetal poppet with a NITRILE(Buna-N) seal and stainless steel spring.Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
80SSC - All 303 stainless steel body construction. Control Centerwith four tappings; one 1/8" inlet side, two 1/4" outlet sides, one 1/8"outlet side with plug.
SIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 4051SS2 1 50 $ 78.78 11/4" 4052SS2 1.5 36 $ 96.96 11/2" 4053SS2 2.3 25 $126.25 2" 4054SS2 2.9 16 $193.92
80SSB with 1/4" Tapped Holes on Both Ends SIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 7971SS2 1 50 $ 78.78 11/4" 7972SS2 1.5 36 $ 96.96 11/2" 7973SS2 2.3 25 $126.25 2" 7974SS2 2.9 16 $193.92
80SSB with 1/8" Tapped Holes on Both Ends SIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 7951SS2 1 50 $ 78.78 11/4" 4052SS2 1.5 36 $ 96.96 11/2" 7953SS2 2.3 25 $126.25 2" 7954SS2 2.9 16 $193.92
Temp Max: 180°F (80C) Pressure Max: 400 PSI
* Made from bar stock, with a viton seal** Long BodyVITON seats optional, add 10% to list price.
** longer threadsSee page 25 for 3/8" and 1/2" 316SS check valve
80SS/100SS Discount Code A
8
80SS 100SS
STA
INLES
S S
TEEL CH
ECK
VA
LVES
80
0.8
33
.20
40
80SSBVFD -All 304 stainless steel female x female threadedcheck valve body features patented VFD design with stainless steelspring, delrin poppet and a NITRILE (Buna-N) seal. This valve hastwo drilled and tapped holes; 1/8" inlet side and 1/4"outlet side.
80SSAVFD Discount Code A
100MSSVFD - All 304 stainless steel male x female threadedcheck valve body features patented VFD design with stainless steelspring, delrin poppet and a NITRILE (Buna-N) seal. Temp Max: 180°F (80C) Pressure Max: 400 PSI
Composite Poppet & Guide SIZE PART NO. WGT. CASE QTY. LIST PRICE 1"M x 1"F 4220SS2VFD 1 50 $ 61.32 11/4"M x 1"F 4221SS2VFD 1.4 50 $ 61.8111/4"M x 11/4"F 4242SS2VFD 1.6 50 $ 76.3611/2"M x11/4"F 4223SS2VFD 1.7 36 $100.99
100SSVFD - All 304 stainless steel female x female threaded checkvalve body features patented VFD design with stainless steel spring, delrin poppet and a NITRILE (Buna-N) seal. Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 4201SS2VFD 1 50 $ 59.39 11/4" 4202SS2VFD 2 36 $ 80.50 11/2" 4203SS2VFD 2 36 $187.55
80SSCVFD Discount Code A
100MSSVFD Discount Code A
80SSVFD WITH A TAPS - All 304 stainless steel female xfemale threaded check valve body features patented VFD designwith stainless steel spring, delrin poppet and a NITRILE (Buna-N)seal. This valve has a 1/8" drilled and tapped hole on the inlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
80SSA with a 1/8" Tapped Hole on the Inlet Side
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4041SS2VFD 1.2 36 $ 84.84 11/4" 4042SS2VFD 1.5 36 $ 117.56 11/2" 4043SS2VFD 2.4 25 $ 145.44 80SSA with a 1/4 " Tapped Hole on the Inlet Side
80SSXBVFD - All 304 stainless steel female x female thread-ed check valve body features patented VFD design with stainlesssteel spring, delrin poppet and a NITRILE (Buna-N) seal. This valvehas two ¼” tapped holes on the outlet side for pressure switch andgauge. Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
80SSCVFD - All 304 stainless steel female x female threadedcheck valve body features patented VFD design with stainless steelspring, delrin poppet and a NITRILE (Buna-N) seal. Control Centerwith four tapping; one 1/8" inlet side, two ¼” outlet sides, one 1/8"outlet side with a SS plug.
Temp Max: 180°F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
To order Model 80S6 with break-off plug, add “PLG” to part number for2”- 10” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.
80S6VFD - All 316 stainless steel female x female threadedcheck valve body features patented VFD design with stainless steelspring, poppet and a NITRILE (Buna-N) seal, Viton optional.Temp Max: 180°F (80C) Pressure Max: 450 PSI
82S6VFD - All 316 stainless steel threaded male x male checkvalve body features patented VFD design with stainless steelspring, poppet and a NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 450 PSI
SIZE PART NO. WGT. LIST PRICE2"M x 2"M 4093S6VFD 4 $ 973.003"M x 3"M 4094S6VFD 6 $ 1,022.004"M x 4"M 4095S6VFD 12 $ 1,162.005"M x 5"M 4096S6VFD 27 $ 1,465.006"M x 6"M 4097S6VFD 40 $ 4,316.008"M x 8"M 4098S6VFD 63 $ 5,742.00
82S6VFD Discount Code A
To order Model 80S6VFD with break-off plug, add “PLG” to part numberfor 2”- 8” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.
80MS6VFD - All 316 stainless steel threaded male x femalecheck valve body features patented VFD design with stainless steelspring, poppet and a NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 450 PSI
SIZE PART NO. WGT. LIST PRICE2"M x 2"F 4084S6VFD 5 $ 429.253"M x 3"F 4083S6VFD 13 $ 1,035.004"M x 4"F 4077S6VFD 30 $ 1,818.006"M x 6"F 4081S6VFD 69 $ 5,039.00
80S6MVFD Discount Code A
To order Model 82S6VFD with break-off plug, add “PLG” to part numberfor 3”- 8” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.
To order Model 80S6MVFD with break-off plug, add “PLG” to part numberfor 2”- 6” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.
80S6CLVFD - Stainless steel check valve incorporates groovedlocking type pipe connections called Certa-Lok®. Stainless steelinside and out including poppet assembly. High strength stainlesssteel body and spring with a NITRILE (Buna-N) seal. Also avail-able in ductile iron. See Page 6.
Temp Max: 180°F (80C) Pressure Max: 450 PSI
SIZE PART NO. WGT. LIST PRICE 2" 7937S6CLVFD 4 $ 963.54 3" 7938S6CLVFD 10 $ 1,014.04 4" 7939S6CLVFD 27 $ 1,161.00 5" 4088S6CLVFD 32 $ 2,222.00 6" 4089S6CLVFD 47 $ 4,242.00 8" 4090S6CLVFD 90 $ 5,668.00Certa-Lok® is a registered trademark with North American Specialty Products.
To order Model 80S6CLVFD with break-off plug, add “PLG” to part numberfor 3”- 8” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.
80S6CLVFD Discount Code A 80S6MCLVFD Discount Code A
80S6MCLVFD - Stainless steel check valve uses grooved lockingtype pipe connection on outlet end and male pipe thread for theinlet connection. Materials are the same as the 80S6CL. Also avail-able in ductile iron. See Page 6.
Temp Max: 180°F (80C) Pressure Max: 450 PSI
SIZE PART NO. WGT. LIST PRICE 2" 7937S6MCLVFD 4 $ 963.54 3" 7938S6MCLVFD 10 $ 1,014.00 4" 7939S6MCLVFD 27 $ 1,162.00 5" 4088S6MCLVFD 32 $ 2,222.00 6" 4089S6MCLVFD 47 $ 4,242.00 8" 4090S6MCLVFD 90 $ 5,668.00Certa-Lok® is a registered trademark with North American Specialty Products.
Reverse combination available on the inlet side & male on outlet.
To order Model 80S6MCLVFD with break-off plug, add “PLG” to part numberfor 3”- 8” and add $100.00 to list price on valve above, $75.00 added forcomposite plug installed and add “PPLG” to end of part #.
OUR WEBSITE NOW FEATURING:
LIVECHAT
3DANIMATIONS
SHIPMENTTRACKING
UPDATEDPRODUCT
APPROVAL
FLOMATIC VALVES IS AN ACTIVE MEMBER INTHESE INDUSTRY ASSOCIATIONS AND OTHERS
www.watersystemscouncil.org
ALL CHECK VALVES AVAILABLE WITH “DRAIN BACK”HOLE DRILLED INTO CHECK VALVES, CONSULT FACTORY
flomatic vfd
888R/888- Patented design. Cast iron body with epoxy coat-ing. Wafer connection ANSI 125#/250#. Drip tight sealing. Formetal to metal seating use 888. NSF/ANSI 61 and 372 approved.For stainless steel trim add ST to end of part numberand 25% to list. See picture on right.Temp Max: 180°F (80C)Pressure Max: 200 PSI ANSI 125#, 400 PSI ANSI 250#
888 optional - Metal to Metal seat not drip tight SIZE PART NO. WGT. LIST PRICE 2" 2434 5 $ 207.00 21/2" 2432 7 $ 231.00 3" 2435 11 $ 239.00 4" 2436 18 $ 307.00 5" 2433 25 $ 546.00 6" 2437 36 $ 571.00 8"* 2438* 80 $ 1,025.008"** 2438-2** 85 $ 1,417.00
10"* 2439* 129 $ 1,676.00
Note: 21/2"- 8'' are dual rated to fit between both ANSI class 125#& 250# flanges, 2”, 3” & 10” Ductile Iron, ANSI 150#/300#,consult factory for other sizes.For viton seal add 20% to 888 list price* ANSI 150#** 300# Flanged Dimensions
SPLIT DISC®- Cast iron body with epoxy coating and split discdesign. Stainless disc with wafer connection ANSI 125# flange 2”-24” EPDM, PTFE bearing. Stainless steel spring hinge pin. Lifting ringstd. above 4".Temp Max: 180°F (80C) Pressure Max: 200 PSI
402S6R/402S6- 316 stainless steel body. Flanged connectionANSI class 150# connection. Metal to metal seating with a stain-less steel spring. NSF/ANSI 61 and 372 approved (2”-12”).Note: For rubber seal EPDM, add “R” to end of partnumber and 10% to list price.Temp Max: 180° F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-18" SIZE PART NO. WGT. LIST PRICE
888S6R/888S6- Patented design, all 316 stainless steelbody. Wafer connection ANSI 150#/300#, 2”- 6”. Drip tight seal-ing. For metal to metal seating use 888S6 and NSF/ANSI 61 and372 approved.
Note: 2''- 6'' are dual rated to fit between both ANSI class 150# &300# flanges.* ANSI 150# onlyFor viton seal add 20% to 888 list price** 300# Flanged Dimensions
flomatic 888VFD
NEW!
888R/888
Discount Code B
12
78 Discount Code B
Flomatic offers domestically manufactured valve products that meet the requirements under EPA State Revolving Fund (SRF) projects in compliance with the American Iron and Steel Act (AIS) requirements. Must be specified at time of order.
All models available with limit switch, add $600 to list price and add “LS” to end of part #.
78A Discount Code B
90LS/92LS* Discount Code B 90LW/92LW* Discount Code B 90CS/92CS* Discount Code B
SW
ING
CH
ECK
VA
LVES
80
0.8
33
.20
40
High Quality Valves Built to Last...
78- Cast iron body with epoxy coating. Flanged connection ANSIB16.1, class 125. Metal reinforced neoprene swing disc, other sealsare available that are chemically resistant especially to chlo-ramines. In-line serviceable.Temp Max: 140°F (60C) Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"
Stainless steel seats optional on Model 92 only, add 10% to list price.*92 series 4", 6" and 8”.Epoxy coated blue. Model 90 is TNEMEC red primer N-140.
90LW/92LW*- Cast iron body with epoxy primer. MeetsAWWA C508 specifications. Flanged connection ANSI B16.1, class125, with stainless steel shaft. Metal to metal standard or NITRILE(Buna-N) seal (Please add “R” to end of part number) Featuresexternal lever and weight. For vertical installation add “V” to partnumber.
90CS/92CS*- Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125, withstainless steel shaft. Metal to metal standard or NITRILE (Buna-N) seal(Please add “R” to end of part number) Features external lever andweight. Sealed end cushion closure system for adjustable rate of valveclosure. For vertical installation add “V” to part number. Temp Max: 180°F (80C) Pressure Max: 200 PSI: 3"-12", 150 PSI: 14"-30"
78A- Ductile iron angle body with epoxy coating. Flanged connection ANSI B16.1, class 125. Metal reinforced neopreneswing disc, other seals are available that are chemically resistantespecially to chloramines. In-line serviceable. (same as ANSI 90˚elbow dimension)Temp Max: 140°F (60C) Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"
90LS/92LS*-Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125,with stainless steel shaft. Metal to metal standard or NITRILE(Buna-N) seal (Please add “R” to end of part number) Featuresexternal lever and spring. For vertical installation add “V” to partnumber.Temp Max: 180°F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"
93LW- Swing check valve with outside lever and weight. Castiron body with epoxy coated. Meets AWWA C508 specifications.Flanged connection ANSI B16.1, class 125. Bronze trim with stainless steel shaft. Metal to metal seating standard, rubberoptional consult factory. Features external lever and weight.Imported, mainly for AG/Irrigation purposes, not municipal.
745 WITH POSITION INDICATOR- 45˚ Seat Flo-Flex®,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 150, ANSI/AWWA C508, with a Buna-N coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI
745BFPI Discount Code B
High Quality Valves Built to Last... www.flomatic.com
SW
ING
CH
ECK
VA
LVES
8
00
.83
3.2
04
0
745LS Discount Code B
Add “S” to end of part number for Stainless Steel fasteners. 10% mark up to list price.For 2” NPT Stainless Steel tapped plug in cover add -2P to end of part # and $150 adder.
745 WITH LIMIT SWITCH (SPDT) - 45˚ Seat Flo-Flex®,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 150, ANSI/AWWA C508, with a Buna-N coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI
745ASCSURGE STOPPER® Discount Code B
NEW!
745 SURGE-STOPPER® WITH ADJUSTABLESPRING CLOSURE - 45˚ Seat Flo-Flex®, Swing Check ValveEpoxy coated Ductile Iron Body, ANSI B16.1, class 150,ANSI/AWWA C508, with Buna-N coated Disc. Surge-Stopper®designed for high head, long pipe lines with field adjustablespring assisted closure.Temp Max: 140°F (60C) Pressure Max: 250 PSI
208T- Corrosion resistant PVC body. Threaded female x female connection. NITRILE (Buna-N) self-cleaning ball E-Z access port with NITRILE (Buna-N) seal. Also available with socket weld–change part number from “T” to “S”–same pricing.Temp Max: 150°F (65C) Pressure Max: 100 PSI
Note: For BSPP threads, change part number from “T” to “P”.NOT FOR GROUND BURIAL.
14
508- Cast iron body with epoxy coating. Threaded female xfemale connection. Standard corrosion resistant phenolic “SinkingBall” 2 Bolt access cover. Also available with special “FloatingBall” for flood control or air vent application–add “FB” to partnumber and 35% to list price.Temp Max: 180°F (80C) Pressure Max: 150 PSI
Note: 3" and 4", has no access cover, quick disconnect valvesystem.
*Connection is flanged ANSI 125, no floating ball available.
508 Discount Code B
408 & 4082- Cast iron body with epoxy coating and access port,flanged connection ANSI, class 125. NITRILE (Buna-N) covered metalball sinking. Stainless steel fasteners. Also available with special“Floating Ball” for flood control or air vent applications–add FB to partnumber and 35% to list price.
*New 4082 model meets AWWA C508 flange to flange lay lengthsand are ductile iron. Domestic sizes and AIS compliant availableconsult factory.See optional stainless steel body below.
408 & 4082 Discount Code B
208- Cast iron body with epoxy coating and clean-out port.Threaded female x female connection. Features NITRILE (Buna-N)“Sinking Ball”.Temp Max: 180°F (80C) Pressure Max: 150 PSI
77- Auto-Vac® Vacuum Breaker - This 1” valve is avail-able in stainless steel and PVC. All internal parts are engineeredcomposite, with a stainless steel disc and resilient seat. Used toprevent water hammer in wastewater valves.Temp Max: 180°F (80C) Pressure Max: 400 PSI
MATERIAL PART NO. CASE QTY. LIST PRICE PVC 4701P 12 $ 45.00Stainless Steel 4701SS 12 $ 59.00
77 Discount Code B
208T Discount Code B208 Discount Code B
BA
LL CH
ECK
VA
LVES
80
0.8
33
.20
40
www.flomatic.com High Quality Valves Built to Last...
Pictured with optionalAuto-Vac®, add -1 to theend of Ball Check partnumber and $100 to listprice.
208B Discount Code B
208B- Same as Model 208 with bosses for rail mounting. Castiron body with epoxy coating and clean-out port. Threaded femalex female connection. Features NITRILE (Buna-N) “Sinking Ball”.Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE 11/4" 2141B 5 $ 90.00 2" 2142B 10.5 $ 115.00
408 4082
408S6 Discount Code B
Horizontal installationrequires a 20’ statichead on Ball Checks
Recommended for flowvelocity of 3’ to 5’ per sec. For higher
flow, consult factory.
AIS-CompliantMade in U.S.A.
VERTICAL
MOUNTING
Seat up
HORIZONTAL
MOUNTING
Lodging of the ball below the axis. The arrow showsthe direction in which theliquid is moving.
OPERATION OF “THE FLOATING BALL”APPLICATIONS for Model 408FB and 508FB
TO AVOID OVERFLOW OF WATER RISING AND ALSO ALLOW AIR EVACUATION IN FILLING OF TANKS OR PIPES (AIR-VENT).
OptiOnal FlOating Ball
408S6 - All 316 Stainless steel body and access port, flangedconnection ANSI class 150. NITRILE (Buna-N) covered metal ballsinking. Stainless steel fasteners.Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE 4" 3145S6 56 $ 3,547.00Note: Other sizes available at request.
NEW!
15High Quality Valves Built to Last... www.flomatic.com
SERIES 6000 (NICKEL PLATED DUCTILE IRON DISC)Wafer Style butterfly valve,cast iron body. Seat Liner EPDM standard ISO top flange. 10 position lever handle.
FLANGED BUTTERFLY VALVESMunicipal Water & Waste WaterAWWA C504:
• Proof of design available upon request.
• NSF/ANSI 61 Approved.
• Fusion epoxy paint
• V-type packing
• Seat Buna-N
• Ductile Iron disc, 316SS edge
MODEL 45 (Lever Operated) - Cast ductile iron flangedbody. ASTM A536 Cast ductile iron disc with stainless type 316edge. Seat standard NBR (EPDM optional) bonded and vulcanized. Designed to AWWA standard C504, class 150B. Electric/pneumatic actuation available.
Temp Max: 180°F (82C) Pressure Max: 200 PSI SIZE PART NO. WGT. LIST PRICE WITH LEVER
For modulating service add smart card option tolist price and “M” to part #.
AZURE® BUTTERFLY w/ACTUATOR Discount Code BAZURE® Discount Code B
MODEL 45 (Gear Operated) - Ductile iron flanged body. ASTM A536 ductile iron disc with stainless type 316 steel edge. Seat, standard NBR (EPDMoptional)vulcanized.Designed toAWWA standard C504,class150B. Electric/pneumatic actuationavailable.
Temp Max: 180°F (82C) Pressure Max: 200 PSI
SMART CARD Discount Code B
SMART CARD - FCEL Electric Actuator Modulating ServicePart Numbers and Pricing. For High Performance DigitalPositioning Service. Basic 4-20ma input and output, providing450 points of resolution with Flomatic FCEL Electric Actuators.Able to be configured for 1-5V, 0-5V, 0-10V or digital com-mand. Provides default setting upon loss of command. Provideseasy setting of open/closed positions for reverse or direct acting without wiring changes.
Pricing adder $1,153.00 to install DHC Modulating com-ponents in FCEL electric actuator. To order valve withsmart card add “M” to the end of valve part number.
BU
TTERFLY
VA
LVES
80
0.8
33
.20
40
www.flomatic.comHigh Quality Valves Built to Last... 17
SYLAX® WAFER (SS) Discount Code BGEAROPERATOR Discount Code B
149G (DUCTILE IRON DISC) - SYLAX® Full Lug Series Castiron body with epoxy coated ductile iron disc. Seat Liner EPDM(Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Temp Max: 230°F (110°C) Pressure Max: 200 PSI SIZE PART NO. WGT LIST PRICE LIST PRICE
149G (DUCTILE IRON DISC)- SYLAX® Wafer Style Series Cast iron body with epoxy coated ductile iron disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Temp Max: 230°F (110°C) Pressure Max: 200 PSISIZE PART NO. WGT LIST PRICE LIST PRICE (Ductile Iron Disc) WITH LEVER WITH GEAR
149G (316SS DISC)- SYLAX® Wafer Style Series - Cast iron body with 316 stainless steel disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Temp Max: 230˚F (110˚C) Pressure Max: 200 PSI SIZE PART NO. WGT LIST PRICE LIST PRICE (316SS Disc) WITH LEVER WITH GEAR
149G (316SS DISC) - SYLAX® Full Lug Series - Cast ironbody with 316 stainless steel disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator. Temp Max: 230°F (110°C) Pressure Max: 200 PSI SIZE PART NO. WGT LIST PRICE LIST PRICE (316SS Disc) WITH LEVER WITH GEAR
SYLAX® FULL LUG SERIES 149GABody: Cast Iron Seat Liner: EPDMDisc: Epoxy Coated Ductile Iron
333536464653103125159
SIZE PART NO. WGT. LIST PRICE(Ductile Iron Disc)149G037290A149G037291A149G037292A149G037293A149G037294A149G037295A149G037296A149G037297A149G037299A
19
333E-ENVIRO FOOT VALVE- body with high strength acetalpoppet. Tappered stainless steel strainer, end cap, spring and fas-teners. NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4171E .6 50 $ 54.54 11/4" 4172E .8 36 $ 62.62
60SE-ENVIRO FOOT VALVE- body with threaded female connection. Features a NITRILE (Buna-N) seal, acetal poppet (21/2",3" and 4" have bronze poppets) stainless steel spring and strainer.Temp Max: 180°F (80C) Pressure Max: 250 PSI (1/2" size 150 PSI) SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/2 "* 5820E* .1 100 $ 39.39 3/4" 4100E .3 100 $ 39.90 1" 4101E .8 50 $ 46.4611/4"** 4102E** .8 50 $ 53.53 11/4" 4103E 1 36 $ 57.57 11/2" 4104E 1.6 25 $ 88.88 2 " 4105E 2.1 16 $ 137.36 21/2" 4106E 6 $ 453.49 3" 4107E 11 $ 624.18 4" 4108E 19 $ 1,039.29*Polyethylene strainer**Model 600S (4102E) will pass through a 2" pipe.For high temperature: add HTE to the end of part # and 25% to list.
190D- Acetal body and strainer, Nylon 11 poppet.Stainless steel spring and NITRILE (Buna-N) seal.193D- Similar to the 190D with one-piece acetal body and strainer.190P- Polypropylene body and strainer. Stainless steel springand VITON seal.Temp Max: 140°F (60C) SIZE PART NO. MODEL WGT. CASE QTY. LIST PRICE
104PS- Features rugged high-strength noryl GTX 830 valve body with a tapered stainless steel, with a NITRILE (Buna-N) sealand polypropylene follower.Temp Max: 140°F (60C) Pressure Max: 150 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4" 5733PS .21 36 $ 29.80
333DPE-ENVIRO FOOT VALVE- body, but with dual pur-pose male and female threads.Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4"M x 1"F 4181E .5 50 $ 59.5911/2"M x 11/4"F 4182E .8 36 $ 66.66
333DPE Discount Code A333E Discount Code A60SE Discount Code A
124P- FOOT VALVE- features a simple flow through designwith corrosion resistant parts and feature a tapered compositestrainer and poppet.Temp Max: 140°F (60C) Pressure Max: 150 PSI SIZE PART NO. WGT. LIST PRICE
* 4 in 1 combo, male NPT threads 3/4" – 11/2"** 2 in 1 combo barbed insert 1" & 11/4"
104P- Reinforced nylon body with threaded female connection.Polyethylene strainer, polyethylene/acetal poppet. NITRILE (Buna-N) seal and stainless steel spring.Temp Max: 150°F (65C) Pressure Max: 150 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
High Quality Valves Built to Last... www.flomatic.com
FOO
T VA
LVES
AN
D P
LASTI
C V
ALV
ES
80
0.8
33
.20
40
104P Discount Code A
104PS Discount Code A
NEW!
100MP- High-strength Noryl® GTX 830 Body with NITRILE(Buna-N) seal and polypropylene follower. Threaded male xfemale connection. Temp Max: 150°F (65C) Pressure Max: 300 PSI
SIZE PART NO. CASE QTY. LIST PRICE11/4"M x 1"F 4221MP 49 $ 22.2211/4"M x 11/4"F 4242MP 49 $ 24.24
Bulk pricing available.
100MP Discount Code A
The 297D- is an acetal body check valve. Threaded female xfemale construction. Features a VITON seal, Nylon 11 poppet and stainless steel spring.Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE 3/8" 5359 .04 $ 27.27 1/2" 5239 .06 $ 35.35
The 290P is a Polypropylene body check valve and poppet withstainless steel spring and VITON seal.
SIZE PART NO. WGT. LIST PRICE
1/2" 5357 .06 $ 34.34 3/4" 5358 .06 $ 55.55
297D/290P Discount Code A
901- Non-corrosive acetal body and guide. Insert connection.Features NITRILE (Buna-N) seal and stainless steel spring.Temp Max: 180°F (80C) Pressure Max: 150 PSI
812XTF- All 316 stainless steel, threaded female connection.Metal to metal seating and teflon O-ring.2"-4" available with socket weld connection.Consult factory forpricing.* Temp Max: 400°F (200C) * Pressure Max: 300 PSI
63- Cast iron body with epoxy coating. Features threaded femaleconnection. NITRILE (Buna-N) seal, high strength non-metallic orunleaded bronze or ductile iron poppet, stainless steel spring.Heavy duty polyethylene strainer.Temp Max: 180°F (80C) Pressure Max: 250 PSI
www.flomatic.com High Quality Valves Built to Last...
302S6- All 316 stainless steel body. ANSI class 150# flangedconnection. Features a EDPM seal and 304 stainless steel strainer.Temp Max: 180°F (80C) Pressure Max: 200 PSI
333SS- FOOT VALVE- All 303 Stainless steel body with highstrength acetal poppet. Tappered stainless steel strainer, end cap,spring and fasteners. NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
6P STRAINER- Plastic (polyethylene) with male NPT threads.Converts a check valve to a foot valve, by screwing into the valvethreads.Temp Max: 180°F (80C)
16FL STRAINER- All 316 Stainless steel body, flanged with316SS internal strainer. Standard 20 mesh replacement screensoptional 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh).ASME 150 Class.Standard 20 Mesh – if optional 40, 60, 80, or 100 add toend of part number: 40 Mesh = 040 to end of part number
60 Mesh = 060 to end of part number 80 Mesh = 080 to end of part number 100 Mesh = 100 to end of part number
X in part # below 1 for stainless steel and 2 for carbon
*Temp Max: 800°F *Pressure Max: 600 PSI*See temperature/pressure rating. STAINLESS CARBON SIZE PART NO. LIST PRICE LIST PRICE 1" S0014-X-0300 $320.00 $330.00 11/2" S0154-X-0300 $577.00 $550.00 2" S0024-X-0300 $775.00 $660.00
Strainers supplied with FNPT tapped retainer cap for blow off outlet. Strainers supplied with PTFE cap seal.Optional graphite cap seal add: $15.00
16 STRAINER Discount Code B
16 STRAINER- All 316 Stainless steel body, threaded FNPT“Y-Type” strainer. Standard 20 mesh replaceable screens optional40, 60, 80 and 100 mesh screens (fit inside of 20 mesh).ASME 600 Class.Standard 20 Mesh – if optional 40, 60, 80, or 100 add toend of part number: 40 Mesh = 040 to end of part number
60 Mesh = 060 to end of part number 80 Mesh = 080 to end of part number 100 Mesh = 100 to end of part number
X in part # below 1 for stainless steel and 2 for carbon*Temp Max: 800°F *Pressure Max: 600 PSI*See temperature/pressure rating. STAINLESS CARBON SIZE PART NO. LIST PRICE LIST PRICE 1/4" S2501-X-0300 $185.00 $152.00 3/8" S3751-X-0300 $185.00 $152.00 1/2" S5001-X-0300 $185.00 $152.00 3/4" S7501-X-0300 $185.00 $152.00 1" S0011-X-0300 $ 210.00 $ 177.00 11/4" S1251-X-0300 $250.00 $204.00 11/2" S0151-X-0300 $398.00 $264.00 2" S0021-X-0300 $524.00 $280.00Strainers supplied with FNPT tapped retainer cap for blow off outlet. Strainers supplied with PTFE cap seal. Optional graphite list price cap sealadder: $15.00 Many different types of configurations available.
STRAINER- Threaded unleaded Bronze body (3/8" – 2"), 125#cast iron and flanged (21/2" – 12"), 20 mesh stainless steel strain-er. Furnished with clean out plug.
6SE STRAINER- Unleaded bronze body with threaded femaleconnection. Stainless steel strainer with unleaded bronze. Stainlesssteel or plastic caps. SIZE PART NO. WGT. CASE QTY. LIST PRICE
6SS STRAINER- All 303 stainless steel body with threadedfemale connection. Stainless steel strainer with stainless steel orplastic caps. SIZE PART NO. WGT. CASE QTY. LIST PRICE
Rugged Dependability• Model C, full port globe style• Model CF, reduced cavitation configuration• Model CA, angle styleAlways with these standard features...• Fusion Epoxy coating – internal & external• Copper tubing (ss optional)• Control tubing isolation valves• Gauge cocks and air bleeder valve
• Valve Trim – Stainless Steel Standard Optional Unleaded Bronze• Body drain plugs• EZ off Jack screw covers & seat rings• Unleaded Pilots• NSF/ANSI 61 Approved body 11/4”-12”Can be equipped with these popular options• Dual power chamber• Built-In check feature• Stainless Steel Pilots• Electronic controls• Position indicator (standard 6” and up)
Model CA• Angle body globe style
(flanged or threaded)
Model CF• Reduced port globe style
(flanged or threaded)
• Pressure Reducing Valve• Modulating Altitude Valve • Non-Modulating Altitude Valve • Back Pressure Sustaining Valve• Pressure Relief Valve• Surge Arrestor Valve• Pump Control Valve• Pilot Operated Float Valve• Solenoid Control Valve• Flow Control• Hydraulic Check Valve
CHECK THESE FEATURES...
SEVERALDIFFERENT SERIES...
NSF/ANSI 61 approvedconsult factory for configuration and sizes
AIS compliant
CO
NTR
OL V
ALV
ES 8
00
.83
3.2
04
0
www.flomatic.com High Quality Valves Built to Last...
Up to 36''
AIS compliant – Made in USA(Must specify on order)
Model C• Full port globe style
(flanged or threaded)®
®
BACK PRESSURE SUSTAINING VALVE - Sustains a minimum upstream pressure to prevent overdrafting the supply.
NON-MODULATING ALTITUDE VALVE - Single Acting.Level control of storage tanks, reservoirs, and basins.
SIZE THREADED C/CA C/CACF MODEL* C FLANGED C FLANGED
150# 150# 300#
* Reduced cavitation configuration.
C205/CA205 Discount Code B
C/CA C/CA SIZE THREADED CF MODEL* C FLANGED C FLANGED 150# 150# 300#
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE150# 150#
11/2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
* Reduced cavitation configuration.
C/CAC THREADED
CF FLANGED*
11/4"
21/2 "2"
PRESSURE REDUCING VALVE - Reduces high upstream pressure to lower downstream pressure. Part numbers below are for standardC101 valve set at 25-125 PSI. Consult factory for other options.
C/CAC FLANGED
150#
C/CAC FLANGED
300#
High Quality Valves Built to Last... www.flomatic.com
VISIT WEBSITE AT WWW.FLOMATIC.COMFOR CONTROL VALVE PRICE LIST
New NSF/ANSI 61Certified Valves
26
CO
NTR
OL V
ALV
ES 8
00
.83
3.2
04
0
PRP- 3/8" Pressure Reducing Pilot in UnleadedBronze or 316 Stainless Steel* – Enables automaticcontrol valves to reduce inlet pressure to a preset outlet pressureand maintain it irregardless to what fluctuations in flow occur.Temp Max: 180°F (80C) Pressure Max: 400 PSI
* For stainless steel, put “S” before letter and after part number.
BPP - Back Pressure Reducing Pilot in StainlessSteel - Enables automatic control valves to sustain a presetinlet pressure. Also enables control valve to relieve pressureupon reaching a preset inlet pressure.Temp Max: 180°F (80C) Pressure Max: 400 PSI
BPP Discount Code B
MINI BALL VALVE Discount Code B
Mini Ball Valve
SOLENOID VALVE-For on off control used to alternatelyapply pressure to and exhaust pressure from the main valve bodycover. Valves are specified either valve body cover. Valves are 3way 120V and are specified either normally open or closed.
SIZE PART NO. DESCRIPTION LIST PRICE1/4" 8853 Open $ 290.001/4" 8862 Closed $ 290.00
* Other types available.
SOLENOID VALVE Discount Code B
CV80S6 CHECK VALVE- All 316SS body with Delrin poppetand Buna-N seal. Threaded female x female connection.Temp Max: 180° F (82 C) Pressure Max: 400 PSI SIZE PART NO. WGT LIST PRICE3/8" 5159 .43 $ 99.891/2 " 4029 .59 $ 139.00
CV80S6 Discount Code B
PRP Discount Code B
150#150#
3/8" 149B5369 $ 9.40PART NO.
MINI BALL VALVE-Mini ball valves are a quater turn fullported on off isolation valves used on external control valvepilot controls.
152100A152100B152100C152100D
5-80 PSI25-125 PSI2-35 PSI30-300 PSI
$250.00$250.00$250.00$250.00
PART NO. SPRING RANGE LIST PRICE $350.00$350.00$350.00$350.00
LIST PRICESTAINLESS
PART NO. SPRING RANGE LIST PRICE160100SA160100SB160100SC160100SD
5-80 PSI25-125 PSI2-35 PSI30-300 PSI
$425.00$425.00$425.00$425.00
ACP - Accelerator Pilot in Unleaded Bronze - It isused in systems to control flow by applying an independentpressure to the diaphragm. Enables automatic control valvesto rapidly vent water from control diaphragm, thus allowingquicker main valve opening.
Temp Max: Pressure Max: 300 PSI
ACPMODEL 165 Discount Code B
1/2 " $720.00SIZE PART NO. LIST PRICE
165200
180°F (80C)
FC4 Discount Code B
FC -20
FLOW CONTROL- Adjustable restrictor that has free flow inthe direction of the arrow on the body and operates as a needle valve in the reverse direction.
3/8" FC4 $ 175.00SIZE PART NO. LIST PRICE
ManufacturingPlant in UpstateNew York
TEST COCKS Discount Code B
TEST COCKS- Unleaded Bronze test cocks, full port standard.SIZE PART NO. WGT. CASE QTY. LIST PRICE
Y STRAINER- Unleaded Bronze body, 20 mesh stainlesssteel strainer. Furnished with clean out plug.ction as M
SIZE PART NO. LIST PRICE3/8" Inlet x 1/4" Outlet 8710E $ 17.00
See page 21 for other sizes.
Y STRAINER Discount Code B
FLOW LIMITER DEVICE (FLD)- A manual operatingdevice used to restrict the flow on a control valve. It will allowuser to mount on top cover to limit the travel distance of thestem on a control valve.
SIZE PART NO. LIST PRICEFor 2”valve CIS00D-1 $ 150.00
FLOW LIMITER Discount Code B
www.flomatic.com High Quality Valves Built to Last...
27High Quality Valves Built to Last... www.flomatic.com
RRuRulRuleRule Rule oRule ofRule of Rule of TRule of ThRule of ThuRule of ThumRule of ThumbRule of Thumb:Rule of Thumb: Rule of Thumb: I
Rule of Thumb: In
Rule of Thumb: Inl
Rule of Thumb: Inle
Rule of Thumb: Inlet
Rule of Thumb: Inlet
Rule of Thumb: Inlet V
Rule of Thumb: Inlet Vs
Rule of Thumb: Inlet Vs.
Rule of Thumb: Inlet Vs.
Rule of Thumb: Inlet Vs. O
Rule of Thumb: Inlet Vs. Ou
Rule of Thumb: Inlet Vs. Out
Rule of Thumb: Inlet Vs. Outl
Rule of Thumb: Inlet Vs. Outle
Rule of Thumb: Inlet Vs. Outlet
Rule of Thumb: Inlet Vs. Outlet
Rule of Thumb: Inlet Vs. Outlet =
Rule of Thumb: Inlet Vs. Outlet =
Rule of Thumb: Inlet Vs. Outlet = M
Rule of Thumb: Inlet Vs. Outlet = Ma
Rule of Thumb: Inlet Vs. Outlet = Max
Rule of Thumb: Inlet Vs. Outlet = Max
Rule of Thumb: Inlet Vs. Outlet = Max 3
Rule of Thumb: Inlet Vs. Outlet = Max 3:
Rule of Thumb: Inlet Vs. Outlet = Max 3: 1
Rule of Thumb: Inlet Vs. Outlet = Max 3: 1
OK ZONE
SIZING GUIDE for PILOT OPERATED VALVESIn order to insure pressure control and avoid excessive noise and maintenance expense, extreme care must be taken when sizing the throttling valve for a specific application. Although both pressure conditions and flow(velocity) are contributing factors, field experience has determined that flow rate is the most critical factor andthat proper valve sizing can be attained through consideration of the flow rate alone.The maximum flow rates in tables below for Model C (full ported valves) are based on a velocity of 15 feet persecond, feet/second or (4.6 meter per second). The throttling valve is capable of handling larger flows for short-er periods of time; however, the increase in maximum flow should be limited to 25% of the above values.Minimum flow rates are based on 0.5 feet/second flow rate (0.15 meter per second). Valve should be selected tobe opened between 20-30% for best efficiencies and service life. The flow values for Model CF (Reduce portedvalves) in the table below are less as they have smaller valve orifice or seat areas.The tables below indicate the desired throttling valve size (inches) for designated maximum and minimum flowrates in gallons per minute (GPM):
C150E Unleaded Valve Body Female NPT/Union Female NPT/Male NPT
(No union nut)Female NPT/Male NPT
(No union nut)
Single Union Endw/Female NPT
Unleaded Valve BodyC150ET
Description Inlet Outlet
Product Specifications• Connection: NPT (Male/Female),or Sweat (see product option chart below) • Max Pressure: 400 PSI (27 bar) • Max Temperature: 1800F (800C) • Pressure Regulating Setting: Factory set at 50 psi • Standard Spring Adjustment range see part number chart
PRESSURE REDUCING VALVE (PRV)- ModelC150E when properly installed will regulate highupstream (inlet pressure) to a lower regulated down-stream (outlet pressure) constant pressure within a rangeregardless ofwater flow. This is accomplished by anadjustable spring loaded balancing valve factory set toautomatically regulate the downstream pressure.NSF/ANSI 61 Certified by IAPMO R&T, 1⁄2” through 11⁄4”ASSE® Listed 1003, IAPMO® listedCertified for City of Los Angeles
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI
Part numbers are for 15 - 75 PSI range
PRES
SU
RE R
EDU
CIN
G 8
00
.83
3.2
04
0
www.flomatic.com High Quality Valves Built to Last...
PRESSURE REDUCING VALVE (PRV)- ModelC150EHF when properly installed will regulate highupstream (inlet pressure) to a lower regulated down-stream (outlet pressure) constant pressure within a rangeregardless ofwater flow. This is accomplished by anadjustable spring loaded balancing valve factory set toautomatically regulate the downstream pressure.High flow in to 70 GPM
NSF/ANSI 61 Certified by IAPMO R&T.ASSE® Listed 1003, IAPMO® listedCertified for City of Los Angeles
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI
PRESSURE REDUCING VALVE (PRV)- ModelC150ET when properly installed will regulate highupstream (inlet pressure) to a lower regulated down-stream (outlet pressure) constant pressure within a rangeregardless ofwater flow. This is accomplished by anadjustable spring loaded balancing valve factory set toautomatically regulate the downstream pressure.NSF/ANSI 61 Certified by IAPMO R&T.ASSE® Listed 1003, IAPMO® listedCertified for City of Los Angeles
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI
*Note: 11/4" size is one size smaller restricted flow. Maximum 25GPM, see model C150EHF for higher capacity.
C150E Discount Code A C150ET Discount Code A
CONSTANT PRESSURE PUMP CONTROL
$177.65 $177.92 $209.63 $389.56
DIRECT ACTING CONSTANT PRESSURE PUMP CON-TROL VALVE WITH TAPPINGS- Reduces rapid pump cyclingand maintains a pre-set operating pressure for wells. Threadedfemale x female union ends or female I.D. x male O.D. on inlet andoutlet connections. Features a unleaded alloy body & composite bellhousing, Nylon reinforced Buna-N diaphragm. Supplied with twoFNPT tailpiece and union nuts. With two (2) 1⁄4” tappings for gageand pressure switch. One (1) 3⁄4” tapping for water tank.
Temp Max: 180°F (80C) Pressure Max 400 PSIFactory set at 50 PSI
CONSTANT PRESSURE PUMP CONTROL- Reduces rapidpump cycle with field adjustable by-pass and maintains a pre-set operating downstream pressure. Flow 1-5200 GPM depending onsize. For use with domestic water well, municipal water systems,industrial water system, irrigation and agriculture.
Temp Max: 180°F (80C) Pressure Max: 250 PSIFactory set at 60 PSI
SIZE PART NO. LIST PRICE PART NO. LIST PRICETHREADED FLANGED 150#
CYCLE GARD® IVCB152E Discount Code A
HIGH FLOW DIRECT ACTING CONSTANT PRESSUREPUMP CONTROL VALVE- Model C152EHF reduces rapid pumpcycle with field adjustable by-pass and maintains a pre-set operatingdownstream pressure for wells. Threaded female x female NPT con-nection with hex end OD. Features a low lead alloy body and cover.Nylon reinforced Buna-N diaphragm. Ideal for flows up to 70 GPM.
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI
*Note: 11/4” size is one size smaller restricted flow, maximum 25GPM. See model C152EHF below for higher capacity.
SIZE PART NO. SPRING RANGE LIST PRICE
SIZE PART NO. SPRING RANGE LIST PRICE
SIZE PART NO. SPRING RANGE LIST PRICE
LIST PRICE
LIST PRICE
$220.00$265.00$465.00$965.00
$1,100.00
LIST PRICE$250.00
LIST PRICE$250.00
$220.00$265.00$465.00$965.00
$1,100.00
1"F & 11/4" M
1"F & 11/4" M
C152000EC152001EC152002EC152003EC152004E
C152100EC152101EC152102EC152103EC152104E
SIZE
SIZE
PART NO.
PART NO.
SPRING RANGE
SPRING RANGE
$ 1,650$ 1,870$ 2,195$ 2,200$ 3,020$ 4,730$ 8,010
High Quality Valves Built to Last... www.flomatic.com
CO
NSTA
NT
PR
ESSU
RE
PU
MP C
ON
TRO
L8
00
.83
3.2
04
0
3/4"1"1 1/4"*11/2"2"
3/4"1"1 1/4"*11/2"2"
• Slotted seat
• No drilled holes
• Self-cleaning
• No screen
SCREEN DRILLEDHOLE
FOR PRESSURE REDUCING VALVES SEE PG. 22 & 27!
NOTE: NPT VALVES RATED TO 400 PSI
DIRECT ACTING CONSTANT PRESSURE PUMP CONTROL VALVE- Reduces rapid pump cycling and maintains apre-set operating pressure for wells. Threaded female x female connection. Features a low lead alloy body & composite bell housing, Nylon reinforced Buna-N diaphragm. Supplied with twoFNPT tailpiece and union nuts.
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI
DIRECT ACTING CONSTANT PRESSURE PUMP CONTROL VALVE- Dual purpose threads, reduces rapid pumpcycling and maintains a pre-set operating pressure for wells. 1"threaded female I.D. x 11/4" male O.D. on inlet and outlet connections. Features a low lead alloy body & composite bell housing, Nylon reinforced Buna-N diaphragm.
COMPACT CONSTANT PRESSURE PUMP PRESSURE-Reduces rapid pump cycling and maintains a pre-set operatingpressure for wells. Threaded female I.D.x male O.D. on inlet andoutlet connections. Features a unleaded alloy body & cover, Nylonreinforced Buna-N diaphragm. 1” NPT Female connection x 11/4"male NPT.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART # SPRING RANGE LIST PRICE1” C3100E 35 - 65 PSI $ 265.001”* C3100EB* 35 - 65 PSI $ 310.00
CONSTANT PRESSURE PUMP CONTROL VALVE -Reduces rapid pump cycle with field adjustable by-pass and main-tains a pre-set operating downstream pressure. Ideal for irriga-tion, water wells and agriculture applications.
Max. pressure differential between inlet and outlet pressure 125 PSI.Consult factory for higher pressure differential.
30
BOOSTER-IT ®
C154 Discount Code A
CYCLE GARD® CICIN101 Discount Code A
BOOSTER-IT® WATER SYSTEM PUMP CONTROLVALVE- Designed for well water pumping systems, booster systems, and pump irrigation pumping systems. Valve body is cast from an unleaded bronze alloy with two 1/4" tapped holes ontank side for pressure switch and gauge. Temp Max: 180°F (80C) Pressure Max: 175 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
Note: BOOSTER-IT®requires a safety pressure release valve, not
available from Flomatic Valves.
CONSTANT PRESSURE PUMP CONTROL VALVE - Reducesrapid pump cycle and maintains a pre-set operating downstreampressure.Ideal for irrigation, water wells and agriculture. Built inby-pass at 5 GPM.
Temp Max: 180°F (80C) Pressure Max: 250 PSIFactory set at 50 PSI
Temp Max: 180°F (80C) Pressure Max: 250 PSIFactory set at 50 PSI
Temp Max: 180°F (80C) Pressure Max: 250 PSI
LIST PRICE LIST PRICE11/2"2" 11/2"
2"
CIN1020CCIN1020D CIN1020C2
CIN1020D2
SIZE SIZE
PART#THREADED FEMALE PART#
THREADED FEMALE$ 930.00$ 1,050.00 $ 850.00
$ 895.00
CONSTANT PRESSURE PUMP CONTROL VALVE-Reduces rapid pump cycle with field adjustable by-pass andmaintains a pre-set operating downstream pressure for wells.CONSULT FACTORY or control valve price list for specific options.
SIZEPART #
LIST PRICELIST PRICEPART #
11/4"11/2"2"21/2"3"4"6"8"
$ 1,650$ 1,870$ 2,195$ 2,200$ 3,020$ 4,730$ 8,010
THREADED FEMALE
Factory set at 60 PSIMax Flow 25 GPM
CO
NSTA
NT P
RES
SU
RE P
UM
P C
ON
TRO
L 80
0.8
33
.20
40
www.flomatic.com High Quality Valves Built to Last...
*With (2) 1/4” Tappings
CONSTANT PRESSURE PUMP CONTROL
Max. pressure differential between inlet and outlet pressure 125 PSI.Consult factory for higher pressure differential.
CYCLE GARD®
C153S6 Discount Code A
Constant Pressure Pump Control Valve- Reduces rapidpump cycling and maintains a preset system operating pressureindependent from low or high flow conditions. Valve body is all316 stainless steel female NPT connection. Supports a hangingload up to 3,400 lbs. and fits in 4” well casing. 1” NPT Femaleconnection x 11/4" male NPT, flow rates for 1-20 GPM, 11/4" 2-50GPM.Temp Max: 180°F Pressure Max: 400 PSI
Factory set at 50 PSI
For 40 PSI add A to end of part number or 60 PSI add B, and for70 PSI add C
SIZE PART # WGT. LIST PRICE1”F x 11/4"M* C153002S6 3 $281.0011/4"F C153003S6 4.3 $425.00
*Dual purpose threads
31
MINIAIR®- Cast iron fusion bonded epoxy coated body-stainlesssteel trim. Threaded female x female connections. Stainless seatwith Viton o-ring. Small orifice. Consult bulletin # 280 for details.Vents under line pressure.Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
WELLAIR® Discount Code B COMBOAIR®- Cast iron body-stainless steel trim. Combinesfeatures of Miniair® and Maxiair® in one housing. Small orifice is3/32” in the 1” valve, 3/16” in the 2” and 3” sizes.
High Quality Valves Built to Last... www.flomatic.com
AIR
REL
EASE
80
0.8
33
.20
40
6BSE BUG SCREEN - Picture shown with valve not included.Unleaded bronze body with threaded female connection. Stainlesssteel strainer with unleaded bronze. Stainless steel or plastic caps,with nipple for installation into air valve vent. SIZE PART NO. WGT. LIST PRICE
For unit with backflush attachment, add “BF” to end of part number andadd list price. See Backflush on this page.
SEWAIR-DUAL®- Cast iron body, 303 stainless steel trim.NITRILE (Buna-N) seat. Provides protection of both small andlarge orifices. Two body construction.Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI INLET OUTLET PART NO. WGT. LIST PRICE
For unit with backflush attachment, add “BF” to end of part number andadd list price. See Backflush on this page.
SEWAIR-DUAL® Discount Code B
SEWAIR-COMBO®- Cast iron body, 303 stainless steel trim.NITRILE (Buna-N) seat. Provides same protection as Sewair-Dual®,but combines into one body.Temp Max: 150°F (65C) Pressure Max: 175 PSI INLET OUTLET PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. LIST PRICE 3/4" GF800E .21 $ 17.00
UNLEADED DUAL CHECK VALVE- Brass body with singleunion.Temp Max: 180°F (80C) Pressure Max: 175 PSIComplies with ASSE 1024
SIZE PART NO. WGT. LIST PRICE 1/2" GF8089E 2 $ 69.00 3/4" GF8080E 2 $ 71.00 1" GF8081E 2 $ 85.00Add “FC” to end of part number for copper sweat connection.Note: Consult factory for additional connection configurations.
DUAL CHECK with ATMOSPHERIC VENT Continuouspressure backflow preventer with an intermediate atmosphericvent, with double union ends. Complies with ASSE 1012, not forpotable water.Temp Max: 210°F (98C) Pressure Max: 175 PSI
SIZE PART NO. WGT. LIST PRICE 1/2" GF8289 1.3 $ 87.00 3/4" GF8280 1.3 $ 89.00*With copper sweat connectionsNote: Consult factory for additional connection configurations.
GFAVB Discount Code C GFHB8 Discount Code CGF8080E Discount Code C
GF8200 Discount Code C
ATMOSPHERIC VACUUM BREAKER- Designed to preventback-siphonage. Not for potable water.
FOR LISTING OF WORLDWIDE FLOMATIC SALES REP, VISIT OUR WEBPAGE: www.flomatic.com
1. SALES & ORDER DESK 800-833-2040 Press 2 We love to help with new orders and inquiries.
2. TECH SUPPORT 800-833-2040 Press 4 Our engineers are on stand-by for application/product support.
3. MARKETING DEPT. 800-833-2040 Press 3 Use this line to reach the sales & marketing group.
4. FAX ORDERS 800-314-3155 The fastest and easiest way is to fax us orders and inquiries.
518-761-9798
5. PHONE 518-761-9797 If you are out of the country or can’t get through, try this line.
6. WEB SITE www.flomatic.com This page will help you get the latest information on Flomatic.
7. E-MAIL ORDERS [email protected] This is a quick and easy way to send us a message and communicate with us.
8. U.S. Mail 15 Pruyn’s Island Drive Put it in an envelope and lick a stamp, it’s that easy.
Glens Falls, NY 12801-4424
Follow us on:
www.flomatic.com High Quality Valves Built to Last...
Flomatic Conditions of SaleTERMS OF SALEPRICEPrices at date of shipment will apply. Prices are subject to change without notice.ACCEPTANCEOrders are accepted subject to approval of credit. Delivery is subject to strikes,accidents, or other causes beyond our control.ERRORS, SHORTAGES, ETC.All claims for errors, shortages, etc. must be made within 10 days of delivery.CANCELLATIONS OF ORDERSOrders for standard catalog products may be cancelled only if notice is receivedprior to the date of shipment.RETURNSMerchandise in new and saleable condition may be returned within one year afterpurchase on a freight prepaid basis for credit upon return authorization approvalnumber, subject to inspection and acceptance at our plant. A 25% restockingcharge and original freight allowance, if any, will be deducted from the credit.Special order products are nonreturnable, or at manufacturer’s option.MINIMUM NET ORDER TERMS FREIGHT$75.00 1% ten days, net 30 A&C Code $1,500 B Code F.O.B Factory WARRANTIESLIMITED ONE (1)-YEAR WARRANTY (Complete Product Line)Flomatic Corporation warrants that its products are free from defects in materialsand workmanship. Flomatic will replace any valve covered by this warranty that isfound to be defective within one year, unless otherwise stated below, from the timeof sale. This warranty will be void if the product has been modified in any way bythe purchaser, or is subjected to unreasonable use.LIMITED THREE (3)- YEAR WARRANTY (Automatic Control Valves)Flomatic Corporation warrants that its Automatic Control Valves are free fromdefects in materials and workmanship for the period of three (3) years after ship-ment. Flomatic will repair or replace any parts or components that are found to bedefective within three years from the time of its shipment. Components utilized byFlomatic but manufactured by others will be warranted only to the extent of theguarantee of that manufacturer. This warranty will be void if the valve or its con-trols have been modified without factory authorization or if it is subjected to unusu-al operating conditions or if it is used for an application other than which it isintended which were not described or specified at the time of purchase.
LIMITED FIVE (5)-YEAR WARRANTY (Enviro Check® and Enviro FootValves) Flomatic warrants that its ENVIRO-CHECK® AND FOOT VALVES, in all sizesup to 4”, are free from defects in materials and workmanship. Flomatic willreplace, upon return authorization approval number, any ENVIRO CHECK® OR ENVI-RO FOOT VALVE covered by this warranty that is found to be defective within fiveyears from the time of sale. This warranty will be void if the product has beenmodified in any way by the purchaser, or is subjected to unreasonable use.These limited warranties extend to the original purchase from Flomatic only; theydo not extend to any other purchaser or transferee.EXCLUSION OF WARRANTIESFlomatic makes no warranties, expressed or implied, with respect to its valves,other than the expressed limited warranties described herein. The implied war-ranties of merchantability and fitness for a particular purpose are hereby dis-claimed by Flomatic . There are no warranties that extend beyond the descriptionon the face hereof.WARNING-NOT DESIGNED, INTENDED OR PERMITTED IN NUCLEARFACILITY APPLICATIONS. FLOMATIC VALVES ARE NOT DESIGNED OR ENGINEERED FOR USE IN ANY NUCLEAR FACILITY OR IN CONJUNCTION WITH ANY NUCLEAR FACILITY OR SUPPORT FACILITY.USE OF ANY OF FLOMATIC’S PRODUCTS IN ANY SUCH APPLICATIONIS A MISUSE OF THESE PRODUCTS AND VOIDS ALL WARRANTIESCONTAINED HEREIN, EXPRESSED AND IMPLIED, OF MERCHANTABILITYAND FITNESS FOR PARTICULAR PURPOSE.EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGESIn no event shall Flomatic be liable for incidental or consequential damages,including but without limitation, damages of personal injuries resulting from thenegligence of Flomatic, which may arise from the manufacture, sale, purchase and/or use of Flomatic valves. It being intended that purchaser’s exclusive remedy islimited to replacement of defective products. Some states do not allow the exclusionor limitation of incidental or consequential damages, or limitation on how long animplied warranty lasts, so that the above limitations may not apply to you. Contactyour distributor or Flomatic at address shown if you have any questions about thecoverage of this warranty or service under this warranty. This warranty gives youspecific legal rights, and you may have other rights which vary from state to state.
NOTE: Flomatic reserves the right the change and/or alter valve products without prior notice. Consult factory for valve specifications.
88 WAYS YOU CAN REACH US...WAYS YOU CAN REACH US...CO
ND
ITION
S O
F SA
LE8
00
.83
3.2
04
0
Flomatic who we are
Flomatic can accept no responsibility for possible errors in catalogues, brochures and other printed material. Flomatic reserves the right to alter its products without notice. Thisalso applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies.
15 Pruyn’s Island DriveGlens Falls, N.Y. 12801-4424800-833-2040518-761-9797 • Fax 518-761-9798www.flomatic.com e-mail: [email protected]
Distribution By:
This book is covered under patent numbers 6,024,121/6,581,633/5,176,171/4, 971,093/7,128,088/D718,429and other patents.