Top Banner
by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
83

EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Dec 13, 2015

Download

Documents

Ronald Evans
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

EE201 Fundamentals of Electric Circuits

by

Dr. Ibraheem Nasiruddin

1

WHEEL-3:

Page 2: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Connect / Attend

Connect: Create an opposite experience

Asking students to hold any items with their hands and touch other students at hand, shoulder, legs in random manner

Attend:

• Listen individual Responses

• Seek their way to do the same process

2

conclude connect and attend activity and compile thoughts conclude connect and attend activity and compile thoughts Ask them to list down their observation based on the experinceAsk them to list down their observation based on the experince List down process of analysis List down process of analysis

Page 3: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Image

Page 4: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

DC CIRCUIT ANALYSIS AND NETWORK THEOREMS

Page 5: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Mind Map

5

TASIMPLIFICATIONS

DC analysis

Network Theorems

Superposition

Thevenin's

Norton's Theorem

Source Transformation

Mesh Analysis Delta-Wye Transformation

Nodal Analysis

Page 6: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

MESH ANALYSIS1. Assign a distinct current in the clockwise direction to each

independent, closed loop of the network. It is not absolutely necessary to choose the clockwise direction for each loop current.

In fact, any direction can be chosen for each loop current with no loss in accuracy, as long as the remaining steps are followed properly. However, by choosing the clockwise direction as a standard, we can develop a shorthand method for writing the required equations that will save time and possibly prevent some common errors.

This first step is accomplished most effectively by placing a loop current within each “window” of the network, in order to ensure that they are all independent.

1. Indicate the polarities within each loop for each resistor as determined by the assumed direction of loop current for that loop. Note the requirement that the polarities be placed within each loop. This requires, as will be shown, that the common branch- resistor has two sets of polarities across it.

Page 7: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

3. Apply Kirchhoff’s voltage law around each closed loop in the clockwise direction. Again, the clockwise direction was chosen to establish uniformity and prepare us for the method to be introduced later.a) If a resistor has two or more assumed currents through it, the total current

through the resistor is the assumed current of the loop in which Kirchhoff’s voltage law is being applied, plus the assumed currents of the other loops passing through in the same direction, minus the assumed currents through in the opposite direction.

b) The polarity of a voltage source is unaffected by the direction of the assigned loop currents.

4. Solve the resulting simultaneous linear equations for the assumed loop currents.

Page 8: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 9: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 10: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 11: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

MESH ANALYSIS with Current SourcesOn occasion there will be current sources in the network to which mesh analysis

is to be applied. In such cases one can convert the current source to a voltage source (if a parallel resistor is present) and proceed as before, or use the following technique:

•Assign a mesh current to each independent loop, including the current sources. •Redraw the network if necessary by removing the current sources (replace with open-circuit). •Apply Kirchhoff’s voltage law to all the remaining independent paths of the network. Note that the mesh currents I1 – I2 = I = 4 A.

Page 12: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Format Approach To Mesh AnalysisA technique for writing the mesh equations more rapidly and usually with

fewer errors and in a form that is convenient for the use of determinants. Note the following equations:

column 1 is composed of a loop current times the sum of the resistors through which that loop current passes. Column 2 is the product of the resistors common to another loop current times that other loop current. Note that in each equation, this column is subtracted from column 1. Column 3 is the algebraic sum of the voltage sources through which the loop current of interest passes. A source is assigned a positive sign if the loop current passes from the negative to the positive terminal, and a negative value is assigned if the polarities are reversed. The loop current in each window must be in the standard direction (clockwise) .

Page 13: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 14: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

NODAL ANALYSIS• In loop analysis, the general network equations were obtained by

applying Kirchhoff’s voltage law around each closed loop. • Now Kirchhoff’s current law is used to develop a method referred to as

nodal analysis.• A node is defined as a junction of two or more branches. Define one

node as a reference (that is, a point of zero potential or ground), the remaining nodes of the network will all have a fixed potential relative to this reference.

• For a network of N nodes, there will exist (N - 1) nodes with a fixed potential relative to the assigned reference node. Equations relating these nodal voltages can be written by applying Kirchhoff’s current law at each node.

• Solve these nodal voltages in the same manner in which loop currents were found in loop analysis.

Page 15: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 16: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Steps 1 and 2: The network has two nodes, as shown in the above Fig. The lower node is defined as the reference node at ground potential (zero volts), and the other node as V1, the voltage from node 1 to ground.Step 3: I1 and I2 are defined as leaving the node in the Fig., and Kirchhoff’s current law is applied as follows:

Page 17: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 18: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Nodal ANALYSIS with Voltage SourcesOn occasion there will be voltage sources in the network to which nodal

analysis is to be applied. In such cases one can convert the voltage source to a current source (if a series resistor is present) and proceed as before, or use the following technique:•Start as before and assign a nodal voltage to each independent node of the network •Redraw the network if necessary by removing the voltage sources (replace with short-circuit). •Apply Kirchhoff’s current law to all the remaining independent nodes of the network. •Finally, relate the defined nodes to the independent voltage sources of the network, and solve for the nodal voltages.

Page 19: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

In particular, note that the current I3 will leave the supernode atV1 and then enter the same supernode at V2. It must therefore appear twice when applying Kirchhoff’s current law, as shown:

Note that, before any analysis, the voltage across the resistor R3 must be12 V and I3 must be equal to 1.2 A.

Page 20: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Format Approach To Nodal Analysis

• A technique for writing the nodal equations more rapidly and usually with fewer errors and in a form that is convenient for the use of determinants.

• the subscripted voltage at the node in which Kirchhoff’s current law is applied is multiplied by the sum of the conductances attached to that node. Note also that the other nodal voltages within the same equation are multiplied by the negative of the conductance between the two nodes.

• The current sources are represented to the right of the equals sign with a positive sign if they supply current to the node and with a negative sign if they draw current from the node.

• A major requirement, however, is that all voltage sources must first be converted to current sources before the procedure is applied.

Page 21: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 22: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 23: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 24: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 25: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 26: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

If the ratio of R1 to R3 is equal to that ofR2 to R4, the bridge will be balanced, and I = 0 A or V = 0 V.

Page 27: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Home Assignment-6

27

Solve Examples from each section

Submit solution of selected question

Page 28: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

QUIZ-6

28

Page 29: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Circuit configurations are often encountered in which the resistors do not appear to be in series or parallel. Under these conditions, it may be necessary to convert the circuit from one form to another to solve for any unknown quantities if mesh or nodal analysis is not applied.

Page 30: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Note that the pi is actually an inverted delta.

Page 31: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 32: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 33: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 34: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 35: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 36: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Home Assignment-7

36

Solve Examples from each section

Submit solution of selected question

Page 37: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

QUIZ-7

37

Page 38: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Network Theorems

There are seven important fundamental theorems of network analysis which are: • Superposition theorem, • Thévenin’s theorem, • Norton’s theorem,• Maximum power transfer theorem,• Substitution theorem,• Millman’s theorem,• Reciprocity theorem.

Page 39: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Superposition theorem

It can be used to find the solution to networks with two or more sources that are not in series or parallel.

The current through, or voltage across, an element in a linear bilateral network is equal to the algebraic sum of the currents or voltages produced independently by each source.

To consider the effects of each source independently requires that all other sources be removed and replaced without affecting the final result. The total current through any portion of the network is equal to the algebraic sum of the currents produced independently by each source.

Page 40: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

To remove a voltage source when applying this theorem, the difference in potential between the terminals of the voltage source must be set to zero(short circuit); removing a current source requires that its terminals be opened (open circuit). Any internal resistance or conductance associatedwith the displaced sources is not eliminated but must still be considered.

Page 41: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

The superposition principle is not applicable to power

effects since the power loss in a resistor varies as the square

(nonlinear) of the current or voltage.

The total power delivered to a resistive element must be

determined using the total current through or the total

voltage across the element and cannot be determined by a

simple sum of the power levels established by each source.

if

but

Page 42: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 43: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 44: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Thévenin’s theoremAny two-terminal, linear bilateral dc network can be

replaced by an equivalent circuit consisting of a

voltage source and a series resistor, as shown

The Thévenin equivalent circuit provides an equivalence at theterminals only—the internal construction and characteristics of the original network and the Thévenin equivalent are usually quite different.

Page 45: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 46: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 47: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 48: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 49: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 50: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 51: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

NORTON’S THEOREMAny two-terminal linear bilateral dc network can be replaced by an equivalent circuit consisting of a current source and a parallel resistor.It was demonstrated before that every voltage source with a series internal resistance has a current source equivalent. The current source equivalent of the Thévenin network can be determined by Norton’s theorem as shown in Fig.

Page 52: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 53: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 54: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 55: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 56: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 57: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

MAXIMUM POWER TRANSFER THEOREM

A load will receive maximum power from a linear

bilateral dc network when its total resistive value

is exactly equal to the Thévenin resistance of the

network as “seen” by the load.

For the Thévenin equivalent circuit, maximum power will be delivered to the load when RL = R TH

For the Norton equivalent circuit, maximum power will be delivered to the load when RL = RN

Page 58: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 59: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 60: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Note that a small change in load resistance for levels of RL below RTh will have a moredramatic effect on the power delivered than similar changes in RL above the RTh level.

Page 61: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Note again that the most dramatic changes in VL and IL occur for levels of RL less than RTh. As pointed out on the plot, when RL= RTh, VL = ETh/2 and IL = Imax/2, with Imax = ETh/RTh.

Page 62: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

DC Operating EfficiencyThe dc operating efficiency of a system is defined by the

ratio of the power delivered to the load to the power

supplied by the source; that is,

The efficiency therefore increases linearly and dramatically for small levels of RL and then begins to level off as it approaches the 100% level for very large values of RL, as shown in Fig. However, the efficiency criterion is sensitive only to the ratio of PL to Ps and not to their actual levels. At efficiency levels approaching 100%, the power delivered to the load may be so small as to have little practical value. Note that at RL = 1000Ω , PL = 3.54 Watt and while at max. PL = 100W

Page 63: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

For each application, therefore, a balance point must be identified where the efficiency is sufficiently high without reducing the power to the load to insignificant levels.

Page 64: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

This Figure is a semi log plot of

PL and the power delivered by the

source Ps = EThIL versus RL for

ETh = 60 V and RTh = 9 Ω.

It is now quite clear that the PL

curve has only one maximum

(at RL = RTh), whereas Ps

decreases for every increase in RL

Page 65: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 66: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 67: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 68: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

MILLMAN’S THEOREM

Through the application of Millman’s theorem, any number of parallel voltage sources can be reduced to one.

Page 69: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 70: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Steps followed to apply Millman’s Theorm

Step 1: Convert all voltage sources to current sources.

Page 71: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Where

Page 72: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 73: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 74: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 75: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

The dual of Millman’s theorem

Page 76: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

SUBSTITUTION THEOREM

a known potential difference and current in a network can be replaced by an ideal voltage source and current source, respectively. This theorem cannot be used to solve networks with two or more sources that are not in series or parallel.

Page 77: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 78: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

RECIPROCITY THEOREM

Page 79: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Example

Page 80: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:
Page 81: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Home Assignment-8

81

Solve Examples from each section

Submit solution of selected question

Page 82: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

QUIZ-8

82

Page 83: EE201 Fundamentals of Electric Circuits by Dr. Ibraheem Nasiruddin 1 WHEEL-3:

Report-2

83

•create a chart/presentation on the process/product which demonstrates the concept in real life