EDMT34-635A RX(Y)MQ4-6PVE Heat Pump 50/60Hz Cooling Only 50/60Hz
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 1/308
EDMT34-635A
RX(Y)MQ4-6PVE
Heat Pump 50/60Hz
Cooling Only 50/60Hz
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 3/308
EDMT34-635A
Table of Contents i
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Introduction ................................................................................................................. ii
Part 1 General Information ............................................... ................................1
Part 2 Indoor Units.....................................................................................................7
Ceiling Mounted Cassette (Round Flow) Type. ...................... ..................9
Ceiling Mounted Cassette (Compact Multi Flow) Type........... ................25
Ceiling Mounted Cassette (Double Flow) Type ...................... ................43
Ceiling Mounted Cassette Corner Type.................................. ................63
Slim Ceiling Mounted Duct Type ............................................ ................77
Ceiling Mounted Duct Type .................................................... ..............103
Ceiling Suspended Type......................................................... ..............131
Wall Mounted Type................................................................. ............. 145
Floor Standing Type / Concealed Floor Standing Type.......... ..............161
Ceiling Suspended Cassette Type (Connection Unit Series) ...... ..............183
Part 3 Outdoor Units .............................................................................................. 203
Heat Pump 50/60Hz, Cooling Only 50/60Hz .......................... ..............205
Part 4 Installation of Outdoor Units ................................. ............................233
Part 5 Option of Control.................................................... ............................281
Part 6 Guide Specifications.............................................. ............................295
1
FXFQ-P2
FXZQ-M3
FXCQ-M4
FXKQ-MA5
FXDQ-PB / FXDQ-NB6
FXMQ-P7
FXHQ-MA8
FXAQ-P9
FXLQ-MA / FXNQ-MA10
FXUQ-MA11
RX(Y)MQ-P12
13
14
15
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 4/308
Introduction EDMT34-635A
ii Introduction
1. Introduction
PrefaceAlong higher quality building environment and more sophisticated building function, there is now a greater demand
for system expansion for a flexible air-conditioning system capable of finer air-conditioning, thus increasing
importance of individual air-conditioning systems. On the other hand, due to social significance of environmental and
energy problems, elements such as energy-efficiency and low maintenance are still strongly desired.
Daikin is the sole air conditioning company in the world that manufactures every component from refrigerant to
complete air conditioning systems itself. Our commitment to offering the best for people as well as the environment
inspires us to develop new systems that make the most effective use of energy resources.
Daikin, the first in the industry to develop the VRV system, has now enhanced the R-410A with the Inverter
that features a capacity of 4, 5, 6 horsepower to further refine all the features of the current VRV system.
This publication contains a variety of information related to the design and installation of this new VRV System. We
hope this information will serve to deepen your understanding of the system, and will help you to efficiently develop
its highly evolved characteristics.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 5/308
EDMT34-635A Publication list of VRV Engineering Data
Introduction iii
2. Publication list of VRV Engineering DataRefrigerant Type Product Series Book No. Hz, Type Model name Area Note
Publishedin
R-410A
Aircooled
VRVIII
InverterP(A)
EDMT341107A 50/60Hz H/P
Normal typeRXYQ5-54PAY1(E)RXYQ5-54PAYL(E)RXYQ5-54PTL(E)
High COP typeRXYQ16-50PAHY1(E)RXYQ16-50PAHYL(E)RXYQ16-50PHTL(E)
General
VRVIII Heat pump Addition of 6HP
outdoor units (Aseanand Oceania only)
Model change ofFXAQ from MA to Pseries
Dec. 2012
EDMT341015A 50Hz C/O
Normal typeRXQ5-54PAY1
High COP typeRXQ16-50PAHY1
General
VRV Cooling only Addition of 6HP
outdoor unit (Aseanand Oceania only)
Model change ofFXAQ from MA to Pseries
Dec. 2012
ED341119 50Hz C/OSingle outdoor unitseriesRSXQ8-18PY1
General
VRVIII Cooling only New lineup of VRV
outdoor unitconnecting with VRVand residentialindoor units
Dec. 2011
ED34121150Hz C/O50Hz H/P
RX(Y)Q6PAY1ASEANOceania
VRVIII Cooling OnlyHeat pump New lineup of 6HP
outdoor units
Aug. 2012
ED37-750 50Hz H/R REYQ8-48PY1 General VRVIII Heat recovery Nov. 2007
VRVIII-Q
ED341014 50Hz H/P RQYQ8-48PY1 General
VRVIII-Q Heat pump New lineup for
replacement use Outdoor unit only
Dec. 2010
ED341207 50Hz C/O RQQ8-48PY1 General
VRVIII-Q Cooling only New lineup for
replacement use(cooling only)
Outdoor unit only
Jul. 2012
VRVIII-S
ED34-63550/60Hz H/P50/60Hz C/O
RX(Y)MQ4-6PVE GeneralVRVIII-S Heat pump,Cooling only
Jul. 2006
EDMT34-635A50/60Hz H/P50/60Hz C/O
RX(Y)MQ4-6PVE General
VRVIII-S Heat pump,Cooling only Model change of
FXAQ from MA to Pseries
Dec. 2012
Watercooled
VRV-WIII ED30-94250Hz H/P,H/R60Hz H/P,H/R
RWEYQ8-30PY1RWEYQ10-30PYLRWEYQ10-30PTL
General
VRV-WIII Heat pump,Heat recovery New lineup of
Centralized BS units
Dec. 2009
R-22Air
cooled
VRVII
InverterM(A)
ED38-82550Hz C/O50/60Hz H/P
RX(Y)5-48MAY1RX(Y)5-48MAYLRX(Y)5-48MATL
GeneralVRVII Cooling only,Heat pump
Oct. 2008
VRVII-S ED38-32950Hz C/O50/60Hz H/P
RXM4-6MVMRXYM4-6MVM(T)
GeneralVRVII-S Cooling only,Heat Pump
Jan. 2004
VRVIIVRVII-S ED38-727
50Hz C/O
50/60Hz H/P
RXM8-10MAY1
RXM4-6MVMRXYM4-6MVM(T) General
VRVII Cooling only
VRVII-S Cooling only,Heat pump Dec. 2007
For all type OH12-01 50/60HzFor indoor and outdoorunits
General Option handbook Jul. 2012
Heat Reclaim Ventilator(VAM)
GJ ED71-613 50/60Hz VAM150-2000GJVE General
Heat ReclaimVentilator New lineup from FA
to GA series
Feb. 2006
Heat Reclaim Ventilator(VKM)
GA(M) ED71-440B 50HzVKM50-100GAMV1VKM50-100GAV1
General
Heat ReclaimVentilator With DX coil and
humidifier (VKM-GAM)
With DX coil (VKM-GA)
Mar. 2012
This time we publish EDMT34-635A as shown by .
H/P: Heat PumpH/R: Heat RecoveryC/O: Cooling Only
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 6/308
Step by Step VRV System Selection Process (Reference) EDMT34-635A
iv Introduction
3. Step by Step VRV System Selection Process (Reference)
(1)
Obtain the maximum heat load for the area(s) to be conditioned.
(2)
Indoor unit specifications
Outdoor unit specifications
Capacity correction factor
Air velocity and temperature distributions
P.10, 26, 44, 64, 78, 104, 132,
146, 162, 184
P.206~
P.226
P.35, 57, 73, 142, 196
(3)
Selection of refrigerant pipes joints & headers P.244, 246, 261, 263, 269
(4)
Selection of the control system
Control wiring method
Description of devices
P.284
P.282
(5)
Electrical wiring
Indoor unit electric characteristics
Outdoor unit electric characteristics
Outdoor unit field wiring
P.17, 31, 53, 69, 89, 114, 138,
153, 174, 192
P.218
P.217
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 7/308
EDMT34-635A
General Information 1
1
Part 1
General Information
1. Model Names of Indoor/Outdoor Units....................................................21.1 Indoor Units ..............................................................................................2
1.2 Outdoor Units ...........................................................................................2
2. External Appearance...............................................................................32.1 Indoor Units ..............................................................................................3
2.2 Outdoor Units ...........................................................................................3
3. Nomenclature..........................................................................................4
4. Capacity Range.......................................................................................6
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 8/308
Model Names of Indoor/Outdoor Units EDMT34-635A
2 General Information
1. Model Names of Indoor/Outdoor Units
1.1 Indoor Units
Indoor Units
Note: FXDQ has following 2 series, as shown below.FXDQ-PBVET, NBVET: without a Drain Pump (For General, Asia: except for EU, China and Australia)
FXDQ-PBVE, NBVE: with a Drain Pump
1 VE: 1 phase, 220-240/220V, 50/60Hz
Connection unit series indoor units
Note: BEV unit is required for FXUQ only.
1 VE: 1 phase, 220-240/220V, 50/60HzV1: 1 phase, 220-240V, 50Hz
1.2 Outdoor Units
Capacity range 0.8HP 1HP 1.25HP 1.6HP 2HP 2.5HP 3.2HP 4HP 5HP 6HP Power
SupplyCapacity index 20 25 31.25 40 50 62.5 80 100 125 140Ceiling MountedCassette Type(Round Flow)
FXFQ — 25P 32P 40P 50P 63P 80P 100P 125P —
VE1
Ceiling MountedCassette (CompactMulti Flow) Type
FXZQ 20M 25M 32M 40M 50M — — — — —
Ceiling MountedCassette Type(Double Flow)
FXCQ 20M 25M 32M 40M 50M 63M 80M — 125M —
Ceiling MountedCassette CornerType
FXKQ — 25MA 32MA 40MA — 63MA — — — —
Slim Ceiling MountedDuct Type
FXDQ-PBVE
20PB 25PB 32PB — — — — — — —
FXDQ-PBVET
20PB 25PB 32PB — — — — — — —
FXDQ-NBVE — — — 40NB 50NB 63NB — — — —
FXDQ-NBVET
— — — 40NB 50NB 63NB — — — —
Ceiling MountedDuct Type
FXMQ 20P 25P 32P 40P 50P 63P 80P 100P 125P 140P
Ceiling SuspendedType
FXHQ — — 32MA — — 63MA — 100MA — —
Wall Mounted Type FXAQ 20P 25P 32P 40P 50P 63P — — — —
Floor Standing Type FXLQ 20MA 25MA 32MA 40MA 50MA 63MA — — — —
Concealed FloorStanding Type
FXNQ 20MA 25MA 32MA 40MA 50MA 63MA — — — —
Capacity range 3HP 4HP 5HP PowerSupplyCapacity index 71 100 125
Ceiling SuspendedCassette Type
FXUQ 71MA 100MA 125MA V1
Connection Unit forFXUQ BEVQ 71MA 100MA 125MA VE1
Series Model NamePowerSupply
Heat Pump RXYMQ 4P 5P 6P VE2
Cooling Only RXMQ 4P 5P 6P VE2
2 VE: 1 phase, 220-230/220V, 50/60Hz
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 9/308
EDMT34-635A External Appearance
General Information 3
12. External Appearance
2.1 Indoor Units
2.2 Outdoor Units
Ceiling mounted cassette (Round flow) type
FXFQ25PVEFXFQ32PVE
FXFQ40PVEFXFQ50PVEFXFQ63PVEFXFQ80PVEFXFQ100PVEFXFQ125PVE
Ceiling suspended type
FXHQ32MAVEFXHQ63MAVE
FXHQ100MAVE
Ceiling mounted cassette (Compact multi flow) type
FXZQ20MVEFXZQ25MVEFXZQ32MVEFXZQ40MVEFXZQ50MVE
Wall mounted type
FXAQ20PVEFXAQ25PVEFXAQ32PVEFXAQ40PVEFXAQ50PVEFXAQ63PVE
Ceiling mounted cassette (Double flow) type
FXCQ20MVEFXCQ25MVEFXCQ32MVEFXCQ40MVEFXCQ50MVEFXCQ63MVEFXCQ80MVEFXCQ125MVE
Floor standing type
FXLQ20MAVEFXLQ25MAVEFXLQ32MAVEFXLQ40MAVEFXLQ50MAVEFXLQ63MAVE
Ceiling mounted cassette corner type
FXKQ25MAVEFXKQ32MAVEFXKQ40MAVEFXKQ63MAVE
Concealed floor standing type
FXNQ20MAVEFXNQ25MAVEFXNQ32MAVEFXNQ40MAVEFXNQ50MAVEFXNQ63MAVE
Slim ceiling mounted duct type
FXDQ20PBVE/FXDQ20PBVETFXDQ25PBVE/FXDQ25PBVETFXDQ32PBVE/FXDQ32PBVETFXDQ40NBVE/FXDQ40NBVETFXDQ50NBVE/FXDQ50NBVETFXDQ63NBVE/FXDQ63NBVETwith a Drain Pump (VE)without a Drain Pump (VET)
Ceiling suspended cassette type
50HzFXUQ71MAV1 +FXUQ100MAV1 +FXUQ125MAV1 +
Connection unit
Ceiling mounted duct type
FXMQ20PVE FXMQ63PVEFXMQ25PVE FXMQ80PVEFXMQ32PVE FXMQ100PVE
FXMQ40PVE FXMQ125PVEFXMQ50PVE FXMQ140PVE
4, 5, 6HP
RX(Y)MQ4PVERX(Y)MQ5PVERX(Y)MQ6PVE
BEVQ71MAVEBEVQ100MAVEBEVQ125MAVE
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 10/308
Nomenclature EDMT34-635A
4 General Information
3. Nomenclature
Indoor Unit
Connection Unit
Power Supply Symbol1 VE: 1 phase, 220-240/220V, 50/60HzV1: 1 phase, 220-240V, 50Hz
Indicates Major Design CategoryM, P, NB, PB : StandardMA : Standard (RoHS Applied Models)
Capacity IndicationConversion to Horsepower:20: 0.8 HP 50: 2.0 HP 100: 4 HP25: 1 HP 63: 2.5 HP 125: 5 HP32: 1.25 HP 71: 3 HP 140: 6 HP40: 1.6 HP 80: 3.2 HP
RefrigerantQ: R-410A
ShapeF : Ceiling Mounted Cassette (Round Flow)Z : Ceiling Mounted Cassette (Compact Multi Flow)C: Ceiling Mounted Cassette (Double Flow)K : Ceiling Mounted Cassette CornerD : Slim Ceiling Mounted DuctM: Ceiling Mounted DuctH : Ceiling SuspendedA : Wall MountedL : Floor StandingN : Concealed Floor StandingU : Ceiling Suspended Cassette
Series categoryX: Inverter
Unit categoryF: Indoor unit for air cooled type
F 40 VE1PQXF
Power supply symbol1
VE: 1 phase, 220-240/220V, 50/60Hz
Indicates major design category
MA: Standard (RoHS applied models)
Capacity indication
Conversion to Horsepower:
71: 3HP
100: 4HP
125: 5HP
Refrigerant
Q: R-410A
Unit category
BEV: Connection unit
BEV MA VE1Q 71
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 11/308
EDMT34-635A Nomenclature
General Information 5
1Outdoor Unit
VE2
Power supply symbol2 VE: 1 phase, 220-230/220V, 50/60Hz
Indicates major design category
4: 4HP 5: 5HP 6: 6HP
Refrigerant
Q: R-410A
Shape
M: Single outdoor unit
Type
Y: Heat pumpBlank: Cooling only
Series category
X: Inverter
Unit category
R: Outdoor unit for air cooled type
P4QMYXR
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 12/308
Capacity Range EDMT34-635A
6 General Information
4. Capacity Range
Combination ratio
Connection capacity: 50% - 130%
Outdoor unit combinations
Note: *1 Total capacity index of connectable indoor units must be 50%-130% of the capacity index of the outdoorunits.
Indoor unit connection capacity
Combination ratio =Total capacity index of the indoor units
Capacity index of the outdoor units
TypeMin. combination
ratio
Max. combination ratio
Types of connected indoor units
Standard indoor units
Single outdoor units 50% 130%
HP Capacity index Model name
Total capacity index ofconnectable indoor units *1 Maximum
number ofconnectable
indoor units
Combination (%)
50% 100% 130%
4 100 RX(Y)MQ4P 50 100 130 6
5 125 RX(Y)MQ5P 62.5 125 162.5 8
6 140 RX(Y)MQ6P 70 140 182 9
Type HP Capacity index Model name
Types of connected indoor units
Min. combination
ratio
Standard indoor units
Max.
combinationratio
Max. number of
connectableindoor units
Single outdoor units
4 100 RX(Y)MQ4P
50% 130%
6
5 125 RX(Y)MQ5P 8
6 140 RX(Y)MQ6P 9
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 13/308
EDMT34-635A
Indoor Units 7
Part 2
Indoor Units
FXFQ-PCeiling Mounted Cassette(Round Flow) Type . . . . . . . . . . . . . . . . . . . . . . . . . 9
FXZQ-MCeiling Mounted Cassette(Compact Multi Flow) Type. . . . . . . . . . . . . . . . . . 25
FXCQ-MCeiling Mounted Cassette(Double Flow) Type . . . . . . . . . . . . . . . . . . . . . . . . 43
FXKQ-MACeiling Mounted Cassette Corner Type . . . . . . . . 63
FXDQ-PB / FXDQ-NBSlim Ceiling Mounted Duct Type . . . . . . . . . . . . . 77
FXMQ-PCeiling Mounted Duct Type. . . . . . . . . . . . . . . . . 103
FXHQ-MACeiling Suspended Type . . . . . . . . . . . . . . . . . . . 131
FXAQ-P
Wall Mounted Type . . . . . . . . . . . . . . . . . . . . . . . 145
FXLQ-MA / FXNQ-MAFloor Standing Type /Concealed Floor Standing Type . . . . . . . . . . . . . 161
FXUQ-MACeiling Suspended Cassette Type(Connection Unit Series). . . . . . . . . . . . . . . . . . . 183
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 14/308
EDMT34-635A
8 Indoor Units
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 15/308
EDMT34-635A
FXFQ-P 9
2FXFQ-P
Ceiling Mounted Cassette
Round Flow) Type
1. Specifications........................................................................................10
2. Dimensions ...........................................................................................12
3. Piping Diagrams....................................................................................15
4. Wiring Diagrams....................................................................................16
5. Electric Characteristics..........................................................................17
6. Safety Devices Setting..........................................................................18
7. Capacity Tables ....................................................................................197.1 Cooling Capacity ....................................................................................19
7.2 Heating Capacity ....................................................................................20
8. Sound Levels ........................................................................................21
9. Centre of Gravity...................................................................................23
10.Accessories...........................................................................................2410.1 Optional Accessories (for Unit)...............................................................24
10.2 Optional Accessories (for Controls)........................................................24
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 16/308
Specifications EDMT34-635A
10 FXFQ-P
1. Specifications
Ceiling mounted cassette (Round flow) type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.6 Refer to page 17 for Fan Motor Input.
Model FXFQ25PVE FXFQ32PVE FXFQ40PVE FXFQ50PVE
Power supply 1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 4 Cooling capacity (19.5°CWB)kcal/h 2,500 3,200 4,000 5,000Btu/h 9,900 12,600 16,000 19,800
kW 2.9 3.7 4.7 5.8
2 4 Cooling capacity (19°CWB) kW 2.8 3.6 4.5 5.6
3 4 Heating capacity
kcal/h 2,800 3,400 4,300 5,400
Btu/h 10,900 13,600 17,100 21,500
kW 3.2 4.0 5.0 6.3
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 246×840×840 246×840×840 246×840×840 246×840×840
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×6×1.2 2×6×1.2 2×6×1.2 2×6×1.2
Face area m² 0.267 0.267 0.267 0.267
Fan
Model QTS48C15M QTS48C15M QTS48C15M QTS48C15M
Type Turbo fan Turbo fan Turbo fan Turbo fan
Motor output ×Number of units W 56×1 56×1 56×1 56×1
Airflow rate (HH/H/L)
m³/min 13/11.5/10 13/11.5/10 15/13/11 16/13.5/11
l/s 216/191/166 216/191/166 250/216/183 266/225/183
cfm 459/406/353 459/406/353 530/459/388 565/477/388
Drive Direct drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Sound absorbing thermal insulation material Polyurethane form Polyurethane form Polyurethane form Polyurethane form
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mmVP25
External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
Mass (Weight) kg 19.5 19.5 19.5 19.5
5 Sound level (HH/H/L) dB(A) 30/28.5/27 30/28.5/27 31/29/27 32/29.5/27
Sound power (HH/H/L) dB(A) 48/46.5/45 48/46.5/45 49/47/45 50/47.5/45
Safety devices Fuse Fuse Fuse Fuse
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Decorationpanels(Option)
Model BYCP125K-W1 BYCP125K-W1 BYCP125K-W1 BYCP125K-W1
Panel colour Fresh white Fresh white Fresh white Fresh white
Dimensions: (H×W×D) mm 50×950×950 50×950×950 50×950×950 50×950×950
Air filter Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Mass (Weight) kg 5.5 5.5 5.5 5.5
Standard accessories
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal. Washerfixing plate. Sealing pads.Clamps. Screws. Washer forhanging bracket. Insulationfor fitting. Installation guide.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal. Washerfixing plate. Sealing pads.Clamps. Screws. Washer forhanging bracket. Insulationfor fitting. Installation guide.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal. Washerfixing plate. Sealing pads.Clamps. Screws. Washer forhanging bracket. Insulationfor fitting. Installation guide.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal. Washerfixing plate. Sealing pads.Clamps. Screws. Washer forhanging bracket. Insulationfor fitting. Installation guide.
Drawing No. C: 3D060255A
( ) ( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 17/308
EDMT34-635A Specifications
FXFQ-P 11
2Ceiling mounted cassette (Round flow) type
Notes:
1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6 Refer to page 17 for Fan Motor Input.
Model FXFQ63PVE FXFQ80PVE FXFQ100PVE FXFQ125PVE
Power supply 1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 6,300 8,000 10,000 12,500
Btu/h 24,900 31,700 39,600 49,500
kW 7.3 9.3 11.6 14.5
2 4 Cooling capacity (19°CWB) kW 7.1 9.0 11.2 14.0
3 4 Heating capacity
kcal/h 6,900 8,600 10,800 13,800
Btu/h 27,300 34,100 42,700 54,600
kW 8.0 10.0 12.5 16.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 246×840×840 246×840×840 288×840×840 288×840×840
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×10×1.2 2×10×1.2 2×12×1.2 2×12×1.2
Face area m² 0.446 0.446 0.535 0.535
Fan
Model QTS48C15M QTS48C15M QTS48C15M QTS48C15M
Type Turbo fan Turbo fan Turbo fan Turbo fan
Motor output ×Number of units W 56×1 56×1 120×1 120×1
Airflow rate (HH/H/L)
m³/min 19/16.5/13.5 21/18/15 32/26/20 33/28/22.5
l/s 316 / 275 / 225 350 / 300 / 250 533 / 433 / 333 550 / 466 / 375
cfm 671/583/477 742/636/530 1,130/918/706 1,165/989/794
Drive Direct drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Sound absorbing thermal insulation material Polyurethane form Polyurethane form Polyurethane form Polyurethane form
Pipingconnections
Liquid pipes mm φ9.5 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ15.9 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection)
Drain pipe mmVP25
External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
Mass (Weight) kg 22 22 25 25
5 Sound level (HH/H/L) dB(A) 34/31/28 36/33.5/31 43/37.5/32 44/39/34
Sound power (HH/H/L) dB(A) 52/49/46 53/51.5/49 60/54.5/50 61/56/52
Safety devices Fuse Fuse Fuse Fuse
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Decorationpanels(Option)
Model BYCP125K-W1 BYCP125K-W1 BYCP125K-W1 BYCP125K-W1Panel colour Fresh white Fresh white Fresh white Fresh white
Dimensions: (H×W×D) mm 50×950×950 50×950×950 50×950×950 50×950×950
Air filter Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Mass (Weight) kg 5.5 5.5 5.5 5.5
Standard accessories
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal. Washerfixing plate. Sealing pads.Clamps. Screws. Washer forhanging bracket. Insulationfor fitting. Installation guide.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal. Washerfixing plate. Sealing pads.Clamps. Screws. Washer forhanging bracket. Insulationfor fitting. Installation guide.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal. Washerfixing plate. Sealing pads.Clamps. Screws. Washer forhanging bracket. Insulationfor fitting. Installation guide.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal. Washerfixing plate. Sealing pads.Clamps. Screws. Washer forhanging bracket. Insulationfor fitting. Installation guide.
Drawing No. C: 3D060255A
( ) ( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 18/308
Dimensions EDMT34-635A
12 FXFQ-P
2. Dimensions
FXFQ25PVE / FXFQ32PVE / FXFQ40PVE / FXFQ50PVEUnit (mm)
3 D 0 6 0 1
8 7 C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 19/308
EDMT34-635A Dimensions
FXFQ-P 13
2FXFQ63PVE / FXFQ80PVE
Unit (mm)
3 D 0 5 8 4 6 0 E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 20/308
Dimensions EDMT34-635A
14 FXFQ-P
FXFQ100PVE / FXFQ125PVEUnit (mm)
3 D 0 5 8 4 6 9 D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 21/308
EDMT34-635A Piping Diagrams
FXFQ-P 15
2
3. Piping Diagrams
Refrigerant pipe connection port diameters
(mm)
Model Gas Liquid
FXFQ25PVE / FXFQ32PVE / FXFQ40PVE / FXFQ50PVE φ12.7 φ6.4
FXFQ63PVE / FXFQ80PVE / FXFQ100PVE / FXFQ125PVE φ15.9 φ9.5
4D024460F
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 22/308
Wiring Diagrams EDMT34-635A
16 FXFQ-P
4. Wiring Diagrams
FXFQ25PVE / FXFQ32PVE / FXFQ40PVE / FXFQ50PVE / FXFQ63PVE / FXFQ80PVE / FXFQ100PVE /
FXFQ125PVE
3 D 0 5 9 8 9
0 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 23/308
EDMT34-635A Electric Characteristics
FXFQ-P 17
2
5. Electric Characteristics
C: 4D060238D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 24/308
Safety Devices Setting EDMT34-635A
18 FXFQ-P
6. Safety Devices Setting
C: 3D006691Q
Model FXFQ25PVE FXFQ32PVE FXFQ40PVE FXFQ50PVE FXFQ63PVE FXFQ80PVE FXFQ100PVE FXFQ125PVE
Printed circuit board fuse 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A
Fan motor thermal fuse °C – – – – – – – –
Fan motor thermal protector °C – – – – – – – –
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 25/308
EDMT34-635A Capacity Tables
FXFQ-P 19
2
7. Capacity Tables
7.1 Cooling Capacity
FXFQ-P [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB 14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB
20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB 20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC °CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
25
10.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.3 2.9 3.5 2.9
80
10.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.8 6.9 11.4 6.812.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.3 2.9 3.5 2.9 12.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.8 6.9 11.2 6.814.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.3 2.9 3.4 2.9 14.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.8 6.9 11.1 6.716.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.3 2.9 3.4 2.8 16.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.7 6.9 10.9 6.718.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.3 2.9 3.4 2.8 18.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.6 6.9 10.8 6.620.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.2 2.9 3.3 2.8 20.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.4 6.8 10.6 6.621.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.2 2.9 3.3 2.8 21.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.4 6.8 10.6 6.523.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.2 2.9 3.2 2.8 23.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.2 6.7 10.4 6.525.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.1 2.8 3.2 2.8 25.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 10.1 6.7 10.3 6.427.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.1 2.8 3.2 2.7 27.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.6 6.8 9.9 6.6 10.1 6.429.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 3.0 2.8 3.0 2.8 3.1 2.7 29.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.5 6.8 9.8 6.5 10.0 6.331.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 2.9 2.8 3.0 2.8 3.1 2.7 31.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.4 6.7 9.6 6.5 9.8 6.333.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 2.9 2.8 2.9 2.8 3.0 2.7 33.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.3 6.6 9.5 6.4 9.7 6.235.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 2.8 2.8 2.9 2.7 3.0 2.6 35.0 6.1 5.1 7.2 5.9 8.4 6.6 9.0 6.7 9.1 6.6 9.3 6.4 9.5 6.237.0 1.9 1.9 2.3 2.3 2.6 2.6 2.8 2.8 2.8 2.8 2.9 2.7 2.9 2.6 37.0 6.1 5.1 7.2 5.9 8.4 6.6 8.9 6.7 9.0 6.5 9.2 6.3 9.4 6.139.0 1.9 1.9 2.3 2.3 2.6 2.6 2.7 2.7 2.7 2.7 2.8 2.7 2.9 2.6 39.0 6.1 5.1 7.2 5.9 8.4 6.6 8.7 6.5 8.8 6.4 9.0 6.3 9.3 6.1
32
10.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.3 3.2 4.6 3.1
100
10.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 13.4 9.3 14.2 9.212.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.3 3.2 4.5 3.1 12.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 13.4 9.3 14.0 9.114.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.3 3.2 4.4 3.1 14.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 13.4 9.3 13.8 9.0
16.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.3 3.2 4.4 3.1 16.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 13.3 9.3 13.6 9.018.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.2 3.2 4.3 3.1 18.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 13.2 9.2 13.4 8.920.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.2 3.1 4.3 3.1 20.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 13.0 9.1 13.2 8.821.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.1 3.1 4.2 3.1 21.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 12.9 9.1 13.2 8.823.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.1 3.1 4.2 3.0 23.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 12.7 9.0 13.0 8.725.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.0 3.1 4.1 3.0 25.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 12.5 8.9 12.8 8.727.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 4.0 3.1 4.1 3.0 27.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 12.3 8.8 12.6 8.629.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.2 3.9 3.1 4.0 3.0 29.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.9 9.0 12.2 8.7 12.4 8.531.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.8 3.1 3.8 3.1 3.9 3.0 31.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.7 8.9 12.0 8.7 12.2 8.533.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.7 3.1 3.8 3.1 3.9 3.0 33.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.5 8.9 11.8 8.6 12.1 8.435.0 2.4 2.4 2.9 2.8 3.4 3.1 3.6 3.1 3.6 3.1 3.7 3.1 3.8 3.0 35.0 7.6 6.8 9.0 7.8 10.5 8.7 11.2 8.9 11.3 8.8 11.6 8.5 11.9 8.337.0 2.4 2.4 2.9 2.8 3.4 3.1 3.5 3.1 3.6 3.1 3.7 3.0 3.8 2.9 37.0 7.6 6.8 9.0 7.8 10.5 8.7 11.0 8.9 11.2 8.7 11.4 8.5 11.7 8.239.0 2.4 2.4 2.9 2.8 3.4 3.1 3.5 3.1 3.5 3.1 3.6 3.0 3.7 2.9 39.0 7.6 6.8 9.0 7.8 10.5 8.7 10.8 8.7 11.0 8.6 11.2 8.4 11.5 8.2
40
10.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.4 3.9 5.7 3.9
125
10.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 16.7 10.9 17.7 10.712.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.4 3.9 5.6 3.8 12.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 16.7 10.9 17.5 10.614.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.4 3.9 5.5 3.8 14.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 16.7 10.9 17.2 10.616.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.4 3.9 5.5 3.8 16.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 16.7 10.8 17.0 10.518.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.3 3.9 5.4 3.8 18.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 16.4 10.7 16.8 10.420.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.2 3.9 5.3 3.7 20.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 16.2 10.6 16.6 10.321.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.2 3.8 5.3 3.7 21.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 16.1 10.6 16.4 10.223.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.1 3.8 5.2 3.7 23.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 15.9 10.5 16.2 10.125.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.0 3.8 5.1 3.7 25.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 15.6 10.4 16.0 10.0
27.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 5.0 3.7 5.1 3.6 27.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 15.4 10.3 15.8 9.929.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.8 3.8 4.9 3.7 5.0 3.6 29.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.9 10.5 15.2 10.2 15.5 9.931.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.7 3.8 4.8 3.7 4.9 3.6 31.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.6 10.4 15.0 10.1 15.3 9.833.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.6 3.7 4.7 3.7 4.8 3.6 33.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.4 10.3 14.7 10.0 15.1 9.735.0 3.0 2.9 3.6 3.4 4.2 3.7 4.5 3.8 4.6 3.7 4.7 3.6 4.8 3.5 35.0 9.4 7.9 11.3 9.0 13.1 10.1 14.0 10.3 14.2 10.2 14.5 9.9 14.9 9.637.0 3.0 2.9 3.6 3.4 4.2 3.7 4.4 3.8 4.5 3.7 4.6 3.6 4.7 3.5 37.0 9.4 7.9 11.3 9.0 13.1 10.1 13.8 10.3 13.9 10.1 14.3 9.8 14.6 9.539.0 3.0 2.9 3.6 3.4 4.2 3.7 4.4 3.7 4.4 3.7 4.5 3.6 4.6 3.5 39.0 9.4 7.9 11.3 9.0 13.1 10.1 13.5 10.1 13.7 10.0 14.1 9.7 14.4 9.4
50
10.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.7 4.6 7.1 4.512.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.7 4.6 7.0 4.514.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.7 4.6 6.9 4.516.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.7 4.5 6.8 4.418.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.6 4.5 6.7 4.420.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.5 4.5 6.6 4.421.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.4 4.5 6.6 4.323.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.4 4.4 6.5 4.325.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.3 4.4 6.4 4.327.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 6.0 4.5 6.2 4.4 6.3 4.229.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 5.9 4.5 6.1 4.3 6.2 4.231.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 5.9 4.4 6.0 4.3 6.1 4.233.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 5.8 4.4 5.9 4.2 6.0 4.235.0 3.8 3.4 4.5 3.9 5.2 4.3 5.6 4.4 5.7 4.4 5.8 4.2 5.9 4.1
37.0 3.8 3.4 4.5 3.9 5.2 4.3 5.5 4.4 5.6 4.3 5.7 4.2 5.8 4.139.0 3.8 3.4 4.5 3.9 5.2 4.3 5.4 4.3 5.5 4.3 5.6 4.2 5.8 4.0
63
10.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 8.5 5.8 9.0 5.712.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 8.5 5.8 8.9 5.714.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 8.5 5.8 8.7 5.716.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 8.5 5.8 8.6 5.618.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 8.3 5.8 8.5 5.620.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 8.2 5.7 8.4 5.521.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 8.2 5.7 8.3 5.523.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 8.1 5.6 8.2 5.525.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 7.9 5.6 8.1 5.427.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.6 5.7 7.8 5.6 8.0 5.429.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.5 5.7 7.7 5.5 7.9 5.431.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.4 5.7 7.6 5.5 7.8 5.333.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.3 5.6 7.5 5.4 7.6 5.335.0 4.8 4.3 5.7 5.0 6.6 5.6 7.1 5.6 7.2 5.5 7.4 5.4 7.5 5.337.0 4.8 4.3 5.7 5.0 6.6 5.6 7.0 5.6 7.1 5.5 7.2 5.4 7.4 5.239.0 4.8 4.3 5.7 5.0 6.6 5.6 6.9 5.6 7.0 5.4 7.1 5.3 7.3 5.2
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 26/308
Capacity Tables EDMT34-635A
20 FXFQ-P
7.2 Heating Capacity
FXFQ-P [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDBUnitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0 16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW °CDB °CWB kW kW kW kW kW kW
25
-19.8 -20.0 1.9 1.9 1.9 1.9 1.9 1.9
80
-19.8 -20.0 5.9 5.9 5.9 5.9 5.9 5.8-18.8 -19.0 1.9 1.9 1.9 1.9 1.9 1.9 -18.8 -19.0 6.1 6.1 6.0 6.0 6.0 6.0
-16.7 -17.0 2.1 2.1 2.0 2.0 2.0 2.0 -16.7 -17.0 6.4 6.4 6.4 6.4 6.4 6.4-14.7 -15.0 2.2 2.2 2.2 2.2 2.2 2.1 -14.7 -15.0 6.8 6.8 6.8 6.7 6.7 6.7-12.6 -13.0 2.3 2.3 2.3 2.3 2.3 2.3 -12.6 -13.0 7.1 7.1 7.1 7.1 7.1 7.1-10.5 -11.0 2.4 2.4 2.4 2.4 2.4 2.4 -10.5 -11.0 7.5 7.5 7.5 7.5 7.4 7.4-9.5 -10.0 2.5 2.4 2.4 2.4 2.4 2.4 -9.5 -10.0 7.7 7.7 7.6 7.6 7.6 7.6-8.5 -9.1 2.5 2.5 2.5 2.5 2.5 2.5 -8.5 -9.1 7.8 7.8 7.8 7.8 7.8 7.8-7.0 -7.6 2.6 2.6 2.6 2.6 2.6 2.6 -7.0 -7.6 8.1 8.1 8.1 8.1 8.0 8.0-5.0 -5.6 2.7 2.7 2.7 2.7 2.7 2.7 -5.0 -5.6 8.4 8.4 8.4 8.4 8.4 8.4-3.0 -3.7 2.8 2.8 2.8 2.8 2.8 2.8 -3.0 -3.7 8.8 8.8 8.7 8.7 8.7 8.70.0 -0.7 3.0 3.0 3.0 3.0 3.0 2.8 0.0 -0.7 9.3 9.3 9.3 9.3 9.3 8.73.0 2.2 3.1 3.1 3.1 3.1 3.0 2.8 3.0 2.2 9.8 9.8 9.8 9.7 9.4 8.75.0 4.1 3.3 3.2 3.2 3.1 3.0 2.8 5.0 4.1 10.2 10.1 10.0 9.7 9.4 8.77.0 6.0 3.4 3.4 3.2 3.1 3.0 2.8 7.0 6.0 10.5 10.5 10.0 9.7 9.4 8.79.0 7.9 3.5 3.4 3.2 3.1 3.0 2.8 9.0 7.9 10.8 10.6 10.0 9.7 9.4 8.711.0 9.8 3.6 3.4 3.2 3.1 3.0 2.8 11.0 9.8 11.2 10.6 10.0 9.7 9.4 8.713.0 11.8 3.6 3.4 3.2 3.1 3.0 2.8 13.0 11.8 11.3 10.6 10.0 9.7 9.4 8.715.0 13.7 3.6 3.4 3.2 3.1 3.0 2.8 15.0 13.7 11.3 10.6 10.0 9.7 9.4 8.7
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3
100
-19.8 -20.0 7.4 7.4 7.3 7.3 7.3 7.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4 -18.8 -19.0 7.6 7.6 7.6 7.5 7.5 7.5-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5 -16.7 -17.0 8.0 8.0 8.0 8.0 8.0 8.0-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7 -14.7 -15.0 8.5 8.5 8.4 8.4 8.4 8.4-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8 -12.6 -13.0 8.9 8.9 8.9 8.9 8.9 8.8
-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0 -10.5 -11.0 9.4 9.3 9.3 9.3 9.3 9.3-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0 -9.5 -10.0 9.6 9.6 9.5 9.5 9.5 9.5-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1 -8.5 -9.1 9.8 9.8 9.7 9.7 9.7 9.7-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2 -7.0 -7.6 10.1 10.1 10.1 10.1 10.1 10.0-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4 -5.0 -5.6 10.6 10.5 10.5 10.5 10.5 10.5-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.5 -3.0 -3.7 11.0 11.0 10.9 10.9 10.9 10.90.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.5 0.0 -0.7 11.6 11.6 11.6 11.6 11.6 10.93.0 2.2 3.9 3.9 3.9 3.9 3.7 3.5 3.0 2.2 12.3 12.3 12.2 12.1 11.7 10.95.0 4.1 4.1 4.1 4.0 3.9 3.7 3.5 5.0 4.1 12.7 12.7 12.5 12.1 11.7 10.97.0 6.0 4.2 4.2 4.0 3.9 3.7 3.5 7.0 6.0 13.1 13.1 12.5 12.1 11.7 10.99.0 7.9 4.3 4.3 4.0 3.9 3.7 3.5 9.0 7.9 13.5 13.3 12.5 12.1 11.7 10.911.0 9.8 4.5 4.3 4.0 3.9 3.7 3.5 11.0 9.8 14.0 13.3 12.5 12.1 11.7 10.913.0 11.8 4.5 4.3 4.0 3.9 3.7 3.5 13.0 11.8 14.1 13.3 12.5 12.1 11.7 10.915.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5 15.0 13.7 14.1 13.3 12.5 12.1 11.7 10.9
40
-19.8 -20.0 3.0 2.9 2.9 2.9 2.9 2.9
125
-19.8 -20.0 9.4 9.4 9.4 9.4 9.4 9.3-18.8 -19.0 3.0 3.0 3.0 3.0 3.0 3.0 -18.8 -19.0 9.7 9.7 9.7 9.7 9.6 9.6-16.7 -17.0 3.2 3.2 3.2 3.2 3.2 3.2 -16.7 -17.0 10.3 10.3 10.2 10.2 10.2 10.2-14.7 -15.0 3.4 3.4 3.4 3.4 3.4 3.4 -14.7 -15.0 10.9 10.8 10.8 10.8 10.8 10.7-12.6 -13.0 3.6 3.6 3.6 3.5 3.5 3.5 -12.6 -13.0 11.4 11.4 11.4 11.4 11.3 11.3-10.5 -11.0 3.7 3.7 3.7 3.7 3.7 3.7 -10.5 -11.0 12.0 12.0 11.9 11.9 11.9 11.9-9.5 -10.0 3.8 3.8 3.8 3.8 3.8 3.8 -9.5 -10.0 12.3 12.2 12.2 12.2 12.2 12.2
-8.5 -9.1 3.9 3.9 3.9 3.9 3.9 3.9 -8.5 -9.1 12.5 12.5 12.5 12.5 12.4 12.4-7.0 -7.6 4.0 4.0 4.0 4.0 4.0 4.0 -7.0 -7.6 13.0 12.9 12.9 12.9 12.9 12.8-5.0 -5.6 4.2 4.2 4.2 4.2 4.2 4.2 -5.0 -5.6 13.5 13.5 13.5 13.4 13.4 13.4-3.0 -3.7 4.4 4.4 4.4 4.4 4.4 4.4 -3.0 -3.7 14.1 14.0 14.0 14.0 14.0 13.90.0 -0.7 4.7 4.6 4.6 4.6 4.6 4.4 0.0 -0.7 14.9 14.9 14.8 14.8 14.8 13.93.0 2.2 4.9 4.9 4.9 4.8 4.7 4.4 3.0 2.2 15.7 15.7 15.7 15.5 15.0 13.95.0 4.1 5.1 5.1 5.0 4.8 4.7 4.4 5.0 4.1 16.3 16.2 16.0 15.5 15.0 13.97.0 6.0 5.2 5.2 5.0 4.8 4.7 4.4 7.0 6.0 16.8 16.8 16.0 15.5 15.0 13.99.0 7.9 5.4 5.3 5.0 4.8 4.7 4.4 9.0 7.9 17.3 17.0 16.0 15.5 15.0 13.911.0 9.8 5.6 5.3 5.0 4.8 4.7 4.4 11.0 9.8 17.9 17.0 16.0 15.5 15.0 13.913.0 11.8 5.6 5.3 5.0 4.8 4.7 4.4 13.0 11.8 18.1 17.0 16.0 15.5 15.0 13.915.0 13.7 5.6 5.3 5.0 4.8 4.7 4.4 15.0 13.7 18.1 17.0 16.0 15.5 15.0 13.9
50
-19.8 -20.0 3.7 3.7 3.7 3.7 3.7 3.7-18.8 -19.0 3.8 3.8 3.8 3.8 3.8 3.8-16.7 -17.0 4.1 4.0 4.0 4.0 4.0 4.0-14.7 -15.0 4.3 4.3 4.3 4.2 4.2 4.2-12.6 -13.0 4.5 4.5 4.5 4.5 4.5 4.5-10.5 -11.0 4.7 4.7 4.7 4.7 4.7 4.7-9.5 -10.0 4.8 4.8 4.8 4.8 4.8 4.8-8.5 -9.1 4.9 4.9 4.9 4.9 4.9 4.9-7.0 -7.6 5.1 5.1 5.1 5.1 5.1 5.1-5.0 -5.6 5.3 5.3 5.3 5.3 5.3 5.3
-3.0 -3.7 5.5 5.5 5.5 5.5 5.5 5.50.0 -0.7 5.9 5.9 5.8 5.8 5.8 5.53.0 2.2 6.2 6.2 6.2 6.1 5.9 5.55.0 4.1 6.4 6.4 6.3 6.1 5.9 5.57.0 6.0 6.6 6.6 6.3 6.1 5.9 5.59.0 7.9 6.8 6.7 6.3 6.1 5.9 5.511.0 9.8 7.0 6.7 6.3 6.1 5.9 5.513.0 11.8 7.1 6.7 6.3 6.1 5.9 5.515.0 13.7 7.1 6.7 6.3 6.1 5.9 5.5
63
-19.8 -20.0 4.7 4.7 4.7 4.7 4.7 4.7-18.8 -19.0 4.9 4.9 4.8 4.8 4.8 4.8-16.7 -17.0 5.1 5.1 5.1 5.1 5.1 5.1-14.7 -15.0 5.4 5.4 5.4 5.4 5.4 5.4-12.6 -13.0 5.7 5.7 5.7 5.7 5.7 5.7-10.5 -11.0 6.0 6.0 6.0 6.0 6.0 5.9-9.5 -10.0 6.1 6.1 6.1 6.1 6.1 6.1-8.5 -9.1 6.3 6.3 6.2 6.2 6.2 6.2-7.0 -7.6 6.5 6.5 6.4 6.4 6.4 6.4-5.0 -5.6 6.8 6.7 6.7 6.7 6.7 6.7-3.0 -3.7 7.0 7.0 7.0 7.0 7.0 7.00.0 -0.7 7.5 7.4 7.4 7.4 7.4 7.0
3.0 2.2 7.9 7.8 7.8 7.7 7.5 7.05.0 4.1 8.1 8.1 8.0 7.7 7.5 7.07.0 6.0 8.4 8.4 8.0 7.7 7.5 7.09.0 7.9 8.7 8.5 8.0 7.7 7.5 7.011.0 9.8 8.9 8.5 8.0 7.7 7.5 7.013.0 11.8 9.0 8.5 8.0 7.7 7.5 7.015.0 13.7 9.0 8.5 8.0 7.7 7.5 7.0
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 27/308
EDMT34-635A Sound Levels
FXFQ-P 21
2
8. Sound Levels
Overall
Octave Band Level
220-240/220V, 50/60Hz
Location of microphone Notes:
1. The operating conditions are assumed to be standard(JIS conditions).
2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipment installed.
dB(A)
Model220-240/220V, 50/60Hz
HH H L
FXFQ25PVEFXFQ32PVE 30 28.5 27
FXFQ40PVE 31 29 27
FXFQ50PVE 32 29.5 27
FXFQ63PVE 34 31 28
FXFQ80PVE 36 33.5 31
FXFQ100PVE 43 37.5 32
FXFQ125PVE 44 39 34
FXFQ25PVE / FXFQ32PVE FXFQ40PVE FXFQ50PVE
FXFQ63PVE FXFQ80PVE FXFQ100PVE
4D060231B 4D060232B 4D060233B
4D060234B 4D060235B 4D060236A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 28/308
Sound Levels EDMT34-635A
22 FXFQ-P
FXFQ125PVE
4D060237B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 29/308
EDMT34-635A Centre of Gravity
FXFQ-P 23
2
9. Centre of Gravity
FXFQ25PVE / FXFQ32PVE / FXFQ40PVE / FXFQ50PVE / FXFQ63PVE / FXFQ80PVE / FXFQ100PVE /
FXFQ125PVEUnit (mm)
C: 4D052237G
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 30/308
Accessories EDMT34-635A
24 FXFQ-P
10.Accessories
10.1 Optional Accessories (for Unit)
C: 3D060297C
10.2 Optional Accessories (for Controls)
Refer to page 282.
Model FXFQ25PVE FXFQ32PVE FXFQ40PVE FXFQ50PVE FXFQ63PVE FXFQ80PVE FXFQ100PVE FXFQ125PVE
Decoration panel BYCP125K-W1
Sealing member of air discharge outlet KDBH55K160F
Panel spacer KDBP55H160FA
Filterrelated
High efficiencyfilter unit
65% KAFP556B80 KAFP556B160
90% KAFP557B80 KAFP557B160
Replacementhigh efficiencyfilter
65% KAFP552B80 KAFP552B160
90% KAFP553B80 KAFP553B160
Filter chamber KDDFP55B160
Replacementlong life filter
Non-woven type
KAFP551K160
Ultra long-life filter KAFP55B160
Replacement ultra long lifefilter
KAFP55H160H
Fresh air
intake kit
Chamber type
Without T- joint pipeand fan
KDDP55B160
With T-jointpipewithout fan
KDDP55B160K
Direct installation type KDDP55X160
Branch duct chamber KDJP55B80 KDJP55B160
Chamber connection kit KKSJ55KA160
Insulation kit for high humidity KDTP55K80 KDTP55K160
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 31/308
EDMT34-635A
FXZQ-M 25
3
FXZQ-M
Ceiling Mounted Cassette
Compact Multi Flow) Type
1. Specifications........................................................................................26
2. Dimensions ...........................................................................................28
3. Piping Diagrams....................................................................................29
4. Wiring Diagrams....................................................................................30
5. Electric Characteristics..........................................................................31
6. Safety Devices Setting..........................................................................32
7. Capacity Tables ....................................................................................337.1 Cooling Capacity ....................................................................................33
7.2 Heating Capacity ....................................................................................34
8. Air velocity and Temperature Distributions (Reference Data)...............35
9. Sound Levels ........................................................................................39
10.Centre of Gravity ...................................................................................41
11.Accessories...........................................................................................4211.1 Optional Accessories (for Unit)...............................................................42
11.2 Optional Accessories (for Controls)........................................................42
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 32/308
Specifications EDMT34-635A
26 FXZQ-M
1. Specifications
Ceiling mounted cassette (Compact multi flow) type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5m, level difference: 0m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.6 Refer to page 31 for Fan Motor Input.
Model FXZQ20MVE FXZQ25MVE FXZQ32MVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 2,000 2,500 3,200
Btu/h 7,800 9,900 12,600
kW 2.3 2.9 3.7
2 4 Cooling capacity (19°CWB) kW 2.2 2.8 3.6
3 4 Heating capacity
kcal/h 2,200 2,800 3,400
Btu/h 8,500 10,900 13,600
kW 2.5 3.2 4.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 286×575×575 286×575×575 286×575×575
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×10×1.5 2×10×1.5 2×10×1.5
Face area m² 0.269 0.269 0.269
Fan
Model QTS32C15M QTS32C15M QTS32C15M
Type Turbo fan Turbo fan Turbo fan
Motor output ×Number of units W 55×1 55×1 55×1
Airflow rate (H/L)m³/min 9.0/7.0 9.0/7.0 9.5/7.5
l/s 150/116 150/116 158/125
cfm 318/247 318/247 335/265
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Sound absorbing thermal insulation material Foamed polystyrene/ Foamed polyethylene
Foamed polystyrene/ Foamed polyethylene
Foamed polystyrene/ Foamed polyethylene
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mmVP20
External dia. 26Internal dia. 20
VP20External dia. 26Internal dia. 20
VP20External dia. 26Internal dia. 20
Mass (Weight) kg 18 18 18
5 Sound level (H/L)
230V, 50Hz
dB(A)
30/25 30/25 32/26
240V, 50Hz 32/26 32/26 34/28
220V, 60Hz 32/29 32/29 33/29
Sound power (H)
230V, 50Hz
dB(A)
47 47 49
240V, 50Hz 49 49 51
220V, 60Hz 49 49 50
Safety devices Printed circuit board fuse.Fan motor thermal protector.
Printed circuit board fuse.Fan motor thermal protector.
Printed circuit board fuse.Fan motor thermal protector.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Decorationpanels(Option)
Model BYFQ60B8W1 BYFQ60B8W1 BYFQ60B8W1
Panel colour White (6.5Y9.5/0.5) White (6.5Y9.5/0.5) White (6.5Y9.5/0.5)
Dimensions: (H×W×D) mm 55×700×700 55×700×700 55×700×700
Air filter Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Mass (Weight) kg 2.7 2.7 2.7
Standard accessories
Operation manual. Installation manual.Paper pattern for installation. Drainhose. Clamp metal. Washer fixingplate. Sealing pads. Clamps. Screws.Washer for hanging bracket. Insulationfor fitting.
Operation manual. Installation manual.Paper pattern for installation. Drainhose. Clamp metal. Washer fixingplate. Sealing pads. Clamps. Screws.Washer for hanging bracket. Insulationfor fitting.
Operation manual. Installation manual.Paper pattern for installation. Drainhose. Clamp metal. Washer fixingplate. Sealing pads. Clamps. Screws.Washer for hanging bracket. Insulationfor fitting.
Drawing No. C: 3D038929C
( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 33/308
EDMT34-635A Specifications
FXZQ-M 27
3
Ceiling mounted cassette (Compact multi flow) type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5m, level difference: 0m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
6 Refer to page 31 for Fan Motor Input.
Model FXZQ40MVE FXZQ50MVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 4,000 5,000
Btu/h 16,000 19,800
kW 4.7 5.8
2 4 Cooling capacity (19°CWB) kW 4.5 5.6
3 4 Heating capacity
kcal/h 4,300 5,400
Btu/h 17,100 21,500
kW 5.0 6.3
Casing / Colour Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 286×575×575 286×575×575
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×10×1.5 2×10×1.5
Face area m² 0.269 0.269
Fan
Model QTS32C15M QTS32C15M
Type Turbo fan Turbo fan
Motor output ×Number of units W 55×1 55×1
Airflow rate (H/L)
m³/min 11.0/8.0 14.0/10.0
l/s 183/133 233/166
cfm 388/282 493/353
Drive Direct drive Direct drive
Temperature control Microprocessor thermostat for cooling and heating Microprocessor thermostat for cooling and heating
Sound absorbing thermal insulation material Foamed polystyrene/Foamed polyethylene Foamed polystyrene/Foamed polyethylene
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mmVP20
External dia. 26Internal dia. 20
VP20External dia. 26Internal dia. 20
Mass (Weight) kg 18 18
5 Sound level (H/L)
230V, 50Hz
dB(A)
36/28 41/33
240V, 50Hz 37/29 42/35
220V, 60Hz 36/30 41/34
Sound power (H)
230V, 50Hz
dB(A)
53 58
240V, 50Hz 54 59
220V, 60Hz 53 58Safety devices Printed circuit board fuse.
Fan motor thermal protector.Printed circuit board fuse.
Fan motor thermal protector.
Refrigerant control Electronic expansion valve Electronic expansion valve
Decorationpanels(Option)
Model BYFQ60B8W1 BYFQ60B8W1
Panel colour White (6.5Y9.5/0.5) White (6.5Y9.5/0.5)
Dimensions: (H×W×D) mm 55×700×700 55×700×700
Air filter Resin net(with mould resistance)
Resin net(with mould resistance)
Mass (Weight) kg 2.7 2.7
Standard accessories
Operation manual. Installation manual. Paper pattern forinstallation. Drain hose. Clamp metal. Washer fixing plate.Sealing pads. Clamps. Screws. Washer for hangingbracket. Insulation for fitting.
Operation manual. Installation manual. Paper pattern forinstallation. Drain hose. Clamp metal. Washer fixing plate.Sealing pads. Clamps. Screws. Washer for hangingbracket. Insulation for fitting.
Drawing No. C: 3D038929C
( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 34/308
Dimensions EDMT34-635A
28 FXZQ-M
2. Dimensions
FXZQ20MVE / FXZQ25MVE / FXZQ32MVE / FXZQ40MVE / FXZQ50MVEUnit (mm)
3 D 0 3 9 0 0
5 E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 35/308
EDMT34-635A Piping Diagrams
FXZQ-M 29
3
3. Piping Diagrams
4D040157A
Refrigerant pipe connection port diameters
(mm)
Model Gas Liquid
FXZQ20MVE / FXZQ25MVE / FXZQ32MVE /FXZQ40MVE / FXZQ50MVE
φ12.7 φ6.4
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 36/308
Wiring Diagrams EDMT34-635A
30 FXZQ-M
4. Wiring Diagrams
FXZQ20MVE / FXZQ25MVE / FXZQ32MVE / FXZQ40MVE / FXZQ50MVE
C : 3
D 0 6 4 8 4 3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 37/308
EDMT34-635A Electric Characteristics
FXZQ-M 31
3
5. Electric Characteristics
C: 4D040159B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 38/308
Safety Devices Setting EDMT34-635A
32 FXZQ-M
6. Safety Devices Setting
C: 3D006691Q
Model FXZQ20MVE FXZQ25MVE FXZQ32MVE FXZQ40MVE FXZQ50MVE
Printed circuit board fuse 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A
Fan motor thermal fuse °C – – – – –
Fan motor thermal protector °COFF: 130±5ON : 83±20
OFF: 130±5ON : 83±20
OFF: 130±5ON : 83±20
OFF: 130±5ON : 83±20
OFF: 130±5ON : 83±20
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 39/308
EDMT34-635A Capacity Tables
FXZQ-M 33
3
7. Capacity Tables
7.1 Cooling Capacity
FXZQ-M [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0°CWB 16.0°CWB 18.0°CWB 19.0°CWB 20.0°CWB 22.0°CWB 24.0°CWB
20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB°CDB TC SC TC SC TC SC TC SC TC SC TC SC TC SC
20
10.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.6 2.6 1.6 2.9 1.712.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.6 2.6 1.6 2.9 1.614.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.6 2.6 1.6 2.8 1.616.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.6 1.8 2.8 1.718.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.6 1.8 2.7 1.720.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.6 1.8 2.7 1.721.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.6 1.8 2.7 1.623.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.6 1.7 2.6 1.625.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.6 1.7 2.6 1.627.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.5 1.7 2.6 1.629.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.5 1.7 2.5 1.631.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.4 1.7 2.5 1.633.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.4 1.6 2.5 1.535.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.4 1.6 2.4 1.537.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.3 1.6 2.4 1.539.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.2 1.7 2.3 1.6 2.3 1.5
25
10.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.4 2.1 3.7 2.112.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.4 2.1 3.6 2.114.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.4 2.1 3.6 2.1
16.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.4 2.1 3.5 2.018.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.4 2.1 3.5 2.020.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.4 2.1 3.4 2.021.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.4 2.1 3.4 2.023.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.3 2.1 3.4 1.925.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.3 2.0 3.3 1.927.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.2 2.0 3.3 1.929.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.2 2.0 3.2 1.931.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.1 2.0 3.2 1.933.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.1 2.0 3.1 1.835.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 3.0 2.0 3.0 1.9 3.1 1.837.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 2.9 2.0 3.0 1.9 3.0 1.839.0 1.9 1.5 2.3 1.8 2.6 2.0 2.8 2.0 2.9 2.0 2.9 1.9 3.0 1.8
32
10.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.3 2.5 4.7 2.612.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.3 2.5 4.7 2.514.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.3 2.5 4.6 2.516.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.3 2.5 4.6 2.518.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.3 2.5 4.5 2.520.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.3 2.5 4.4 2.421.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.3 2.5 4.4 2.423.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.2 2.5 4.3 2.425.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.2 2.5 4.3 2.4
27.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.1 2.4 4.2 2.329.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.1 2.4 4.2 2.331.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 4.0 2.4 4.1 2.333.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 3.9 2.4 4.0 2.335.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.8 2.4 3.9 2.3 4.0 2.237.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.7 2.4 3.8 2.3 3.9 2.239.0 2.4 1.9 2.9 2.1 3.4 2.4 3.6 2.4 3.7 2.4 3.8 2.3 3.8 2.2
40
10.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.4 3.4 5.9 3.512.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.4 3.4 5.8 3.414.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.4 3.4 5.8 3.416.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.4 3.4 5.7 3.418.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.4 3.4 5.6 3.320.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.4 3.4 5.5 3.321.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.4 3.4 5.5 3.323.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.3 3.4 5.4 3.225.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.2 3.3 5.3 3.227.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.2 3.3 5.3 3.229.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.1 3.3 5.2 3.131.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 5.0 3.2 5.1 3.133.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.8 3.3 4.9 3.2 5.0 3.135.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.7 3.3 4.9 3.2 5.0 3.0
37.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.7 3.2 4.8 3.1 4.9 3.039.0 3.0 2.5 3.6 2.9 4.2 3.2 4.5 3.3 4.6 3.2 4.7 3.1 4.8 3.0
50
10.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.7 4.4 7.4 4.412.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.7 4.4 7.3 4.414.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.7 4.4 7.2 4.316.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.7 4.4 7.1 4.318.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.7 4.4 7.0 4.220.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.7 4.4 6.9 4.221.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.7 4.4 6.8 4.223.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.6 4.3 6.7 4.125.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.5 4.3 6.6 4.127.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.4 4.2 6.6 4.029.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.3 4.2 6.5 4.031.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.2 4.1 6.4 4.033.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 6.0 4.2 6.1 4.1 6.3 3.935.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 5.9 4.2 6.0 4.0 6.2 3.937.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 5.8 4.1 5.9 4.0 6.1 3.839.0 3.8 3.1 4.5 3.6 5.2 4.0 5.6 4.1 5.7 4.1 5.8 3.9 6.0 3.8
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 40/308
Capacity Tables EDMT34-635A
34 FXZQ-M
7.2 Heating Capacity
FXZQ-M [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW
20
-19.8 -20.0 1.5 1.5 1.5 1.5 1.5 1.5-18.8 -19.0 1.5 1.5 1.5 1.5 1.5 1.5-16.7 -17.0 1.6 1.6 1.6 1.6 1.6 1.6-14.7 -15.0 1.7 1.7 1.7 1.7 1.7 1.7-12.6 -13.0 1.8 1.8 1.8 1.8 1.8 1.8-10.5 -11.0 1.9 1.9 1.9 1.9 1.9 1.9-9.5 -10.0 1.9 1.9 1.9 1.9 1.9 1.9-8.5 -9.1 2.0 2.0 1.9 1.9 1.9 1.9-7.0 -7.6 2.0 2.0 2.0 2.0 2.0 2.0-5.0 -5.6 2.1 2.1 2.1 2.1 2.1 2.1-3.0 -3.7 2.2 2.2 2.2 2.2 2.2 2.20.0 -0.7 2.3 2.3 2.3 2.3 2.3 2.23.0 2.2 2.5 2.5 2.4 2.4 2.3 2.25.0 4.1 2.5 2.5 2.5 2.4 2.3 2.27.0 6.0 2.6 2.6 2.5 2.4 2.3 2.29.0 7.9 2.7 2.7 2.5 2.4 2.3 2.211.0 9.8 2.8 2.7 2.5 2.4 2.3 2.213.0 11.8 2.8 2.7 2.5 2.4 2.3 2.215.0 13.7 2.8 2.7 2.5 2.4 2.3 2.2
25
-19.8 -20.0 1.9 1.9 1.9 1.9 1.9 1.9-18.8 -19.0 1.9 1.9 1.9 1.9 1.9 1.9-16.7 -17.0 2.1 2.1 2.0 2.0 2.0 2.0-14.7 -15.0 2.2 2.2 2.2 2.2 2.2 2.1-12.6 -13.0 2.3 2.3 2.3 2.3 2.3 2.3
-10.5 -11.0 2.4 2.4 2.4 2.4 2.4 2.4-9.5 -10.0 2.5 2.4 2.4 2.4 2.4 2.4-8.5 -9.1 2.5 2.5 2.5 2.5 2.5 2.5-7.0 -7.6 2.6 2.6 2.6 2.6 2.6 2.6-5.0 -5.6 2.7 2.7 2.7 2.7 2.7 2.7-3.0 -3.7 2.8 2.8 2.8 2.8 2.8 2.80.0 -0.7 3.0 3.0 3.0 3.0 3.0 2.83.0 2.2 3.1 3.1 3.1 3.1 3.0 2.85.0 4.1 3.3 3.2 3.2 3.1 3.0 2.87.0 6.0 3.4 3.4 3.2 3.1 3.0 2.89.0 7.9 3.5 3.4 3.2 3.1 3.0 2.811.0 9.8 3.6 3.4 3.2 3.1 3.0 2.813.0 11.8 3.6 3.4 3.2 3.1 3.0 2.815.0 13.7 3.6 3.4 3.2 3.1 3.0 2.8
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.50.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.53.0 2.2 3.9 3.9 3.9 3.9 3.7 3.55.0 4.1 4.1 4.1 4.0 3.9 3.7 3.57.0 6.0 4.2 4.2 4.0 3.9 3.7 3.59.0 7.9 4.3 4.3 4.0 3.9 3.7 3.511.0 9.8 4.5 4.3 4.0 3.9 3.7 3.513.0 11.8 4.5 4.3 4.0 3.9 3.7 3.515.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5
40
-19.8 -20.0 3.0 2.9 2.9 2.9 2.9 2.9-18.8 -19.0 3.0 3.0 3.0 3.0 3.0 3.0-16.7 -17.0 3.2 3.2 3.2 3.2 3.2 3.2-14.7 -15.0 3.4 3.4 3.4 3.4 3.4 3.4-12.6 -13.0 3.6 3.6 3.6 3.5 3.5 3.5-10.5 -11.0 3.7 3.7 3.7 3.7 3.7 3.7-9.5 -10.0 3.8 3.8 3.8 3.8 3.8 3.8-8.5 -9.1 3.9 3.9 3.9 3.9 3.9 3.9-7.0 -7.6 4.0 4.0 4.0 4.0 4.0 4.0-5.0 -5.6 4.2 4.2 4.2 4.2 4.2 4.2
-3.0 -3.7 4.4 4.4 4.4 4.4 4.4 4.40.0 -0.7 4.7 4.6 4.6 4.6 4.6 4.43.0 2.2 4.9 4.9 4.9 4.8 4.7 4.45.0 4.1 5.1 5.1 5.0 4.8 4.7 4.47.0 6.0 5.2 5.2 5.0 4.8 4.7 4.49.0 7.9 5.4 5.3 5.0 4.8 4.7 4.411.0 9.8 5.6 5.3 5.0 4.8 4.7 4.413.0 11.8 5.6 5.3 5.0 4.8 4.7 4.415.0 13.7 5.6 5.3 5.0 4.8 4.7 4.4
50
-19.8 -20.0 3.7 3.7 3.7 3.7 3.7 3.7-18.8 -19.0 3.8 3.8 3.8 3.8 3.8 3.8-16.7 -17.0 4.1 4.0 4.0 4.0 4.0 4.0-14.7 -15.0 4.3 4.3 4.3 4.2 4.2 4.2-12.6 -13.0 4.5 4.5 4.5 4.5 4.5 4.5-10.5 -11.0 4.7 4.7 4.7 4.7 4.7 4.7-9.5 -10.0 4.8 4.8 4.8 4.8 4.8 4.8-8.5 -9.1 4.9 4.9 4.9 4.9 4.9 4.9-7.0 -7.6 5.1 5.1 5.1 5.1 5.1 5.1-5.0 -5.6 5.3 5.3 5.3 5.3 5.3 5.3-3.0 -3.7 5.5 5.5 5.5 5.5 5.5 5.50.0 -0.7 5.9 5.9 5.8 5.8 5.8 5.53.0 2.2 6.2 6.2 6.2 6.1 5.9 5.55.0 4.1 6.4 6.4 6.3 6.1 5.9 5.57.0 6.0 6.6 6.6 6.3 6.1 5.9 5.59.0 7.9 6.8 6.7 6.3 6.1 5.9 5.511.0 9.8 7.0 6.7 6.3 6.1 5.9 5.513.0 11.8 7.1 6.7 6.3 6.1 5.9 5.515.0 13.7 7.1 6.7 6.3 6.1 5.9 5.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 41/308
EDMT34-635A Air velocity and Temperature Distributions (Reference Data)
FXZQ-M 35
3
8. Air velocity and Temperature Distributions
(Reference Data)
FXZQ20MVE / FXZQ25MVE (Cooling)
FXZQ20MVE / FXZQ25MVE (Heating)
4D039738D
4D039820D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 42/308
Air velocity and Temperature Distributions (Reference Data) EDMT34-635A
36 FXZQ-M
FXZQ32MVE (Cooling)
FXZQ32MVE (Heating)
4D040188A
4D040191A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 43/308
EDMT34-635A Air velocity and Temperature Distributions (Reference Data)
FXZQ-M 37
3
FXZQ40MVE (Cooling)
FXZQ40MVE (Heating)
4D040189A
4D040192A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 44/308
Air velocity and Temperature Distributions (Reference Data) EDMT34-635A
38 FXZQ-M
FXZQ50MVE (Cooling)
FXZQ50MVE (Heating)
4D040190A
4D040193A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 45/308
EDMT34-635A Sound Levels
FXZQ-M 39
3
9. Sound Levels
Overall
Octave Band Level (230V, 50Hz)
Location of microphone Notes:
1. The operating conditions are assumed to be standard (JIS
conditions)
2. These operating values were obtained in a dead room
(conversion values).
Sound level will vary depending on a range of factors such
as the construction (acoustic absorption coefficient) of the
particular room in which the equipment installed.
dB(A)
Model
Sound level Sound power
230V, 50Hz 240V, 50Hz 220V, 60Hz 230V, 50Hz 240V, 50Hz 220V, 60Hz
H L H L H L H H H
FXZQ20MVEFXZQ25MVE
30 25 32 26 32 29 47 49 49
FXZQ32MVE 32 26 34 28 33 29 49 51 50
FXZQ40MVE 36 28 37 29 36 30 53 54 53FXZQ50MVE 41 33 42 35 41 34 58 59 58
FXZQ20MVE / FXZQ25MVE FXZQ32MVE
FXZQ40MVE FXZQ50MVE
4D040274A 4D040285A
4D040286A 4D040287A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 46/308
Sound Levels EDMT34-635A
40 FXZQ-M
Octave Band Level (240V, 50Hz)
Octave Band Level (220V, 60Hz)
FXZQ20MVE / FXZQ25MVE FXZQ32MVE
FXZQ40MVE FXZQ50MVE
FXZQ20MVE / FXZQ25MVE FXZQ32MVE
FXZQ40MVE FXZQ50MVE
4D040492A 4D040491A
4D040490A 4D040293A
4D040323B4D040289B
4D040290B 4D041034A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 47/308
EDMT34-635A Centre of Gravity
FXZQ-M 41
3
10.Centre of Gravity
FXZQ20MVE / FXZQ25MVE / FXZQ32MVE / FXZQ40MVE / FXZQ50MVE
4D040158A
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 48/308
Accessories EDMT34-635A
42 FXZQ-M
11.Accessories
11.1 Optional Accessories (for Unit)
C: 3D038933A
11.2 Optional Accessories (for Controls)
Refer to page 282.
Model FXZQ20MVE FXZQ25MVE FXZQ32MVE FXZQ40MVE FXZQ50MVE
Decoration panel BYFQ60B8W1
Sealing material of air discharge outlet KDBH44BA60
Panel spacer KDBQ44BA60AReplacement long-life filter KAFQ441BA60
Fresh airintake kit
Direct installation type KDDQ44XA60
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 49/308
EDMT34-635A
FXCQ-M 43
4
FXCQ-M
Ceiling Mounted Cassette
Double Flow) Type
1. Specifications........................................................................................44
2. Dimensions ...........................................................................................46
3. Piping Diagrams....................................................................................50
4. Wiring Diagrams....................................................................................51
5. Electric Characteristics..........................................................................53
6. Safety Devices Setting..........................................................................54
7. Capacity Tables ....................................................................................557.1 Cooling Capacity ....................................................................................55
7.2 Heating Capacity ....................................................................................56
8. Air Velocity and Temperature Distributions (Reference Data) ..............57
9. Sound Levels ........................................................................................59
10.Centre of Gravity ...................................................................................60
11.Accessories...........................................................................................6111.1 Optional Accessories (for Unit)...............................................................61
11.2 Optional Accessories (for Controls)........................................................61
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 50/308
Specifications EDMT34-635A
44 FXCQ-M
1. Specifications
Ceiling mounted cassette (Double flow) type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6 Refer to page 53 for Fan Motor Input.
Model FXCQ20MVE FXCQ25MVE FXCQ32MVE FXCQ40MVE
Power supply 1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 4 Cooling capacity (19.5°CWB)kcal/h 2,000 2,500 3,200 4,000Btu/h 7,800 9,900 12,600 16,000
kW 2.3 2.9 3.7 4.7
2 4 Cooling capacity (19°CWB) kW 2.2 2.8 3.6 4.5
3 4 Heating capacity
kcal/h 2,200 2,800 3,400 4,300
Btu/h 8,500 10,900 13,600 17,100
kW 2.5 3.2 4.0 5.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 305×775×600 305×775×600 305×775×600 305×990×600
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×10×1.5 2×10×1.5 2×10×1.5 2×10×1.5
Face area m² 2×0.100 2×0.100 2×0.100 2×0.145
Fan
Model D17K2AA1 D17K2AB1 D17K2AB1 2D17K1AA1
Type Sirocco fan Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 10×1 15×1 15×1 20×1
Airflow rate (H/L)
m³/min 7/5 9/6.5 9/6.5 12/9
l/s 116/83 150/108 150/108 200/150
cfm 247/177 318/230 318/230 424/318
Drive Direct drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Sound absorbing thermal insulation material Glass wool/Urethane foam Glass wool/Urethane foam Glass wool/Urethane foam Glass wool/Urethane foam
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mmVP25
External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
Mass (Weight) kg 26 26 26 31
5 Sound level (H/L)220V, 50/60Hz
dB(A)32/27 34/28 34/28 34/29
240V, 50Hz 34/29 36/30 36/30 37/32
Safety devices Fuse. Thermal protector forfan motor.
Fuse. Thermal protector forfan motor.
Fuse. Thermal protector forfan motor.
Fuse. Thermal protector forfan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Decorationpanels(Option)
Model BYBC32G-W1 BYBC32G-W1 BYBC32G-W1 BYBC50G-W1
Panel colour White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Dimensions: (H×W×D) mm 53×1,030×680 53×1,030×680 53×1,030×680 53×1,245×680
Air filter Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Mass (Weight) kg 8 8 8 8.5
Standard accessories
Operation manual.Installation manual. Paperpattern for installation.Washer for hangingbrackets. Clamp metal.Drain hose. Insulation forfitting. Washer fixing plates.Sealing pads. Clamps.Screws. Washers.
Operation manual.Installation manual. Paperpattern for installation.Washer for hangingbrackets. Clamp metal.Drain hose. Insulation forfitting. Washer fixing plates.Sealing pads. Clamps.Screws. Washers.
Operation manual.Installation manual. Paperpattern for installation.Washer for hangingbrackets. Clamp metal.Drain hose. Insulation forfitting. Washer fixing plates.Sealing pads. Clamps.Screws. Washers.
Operation manual.Installation manual. Paperpattern for installation.Washer for hangingbrackets. Clamp metal.Drain hose. Insulation forfitting. Washer fixing plates.Sealing pads. Clamps.Screws. Washers.
Drawing No. C: 3D039413
( ) ( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 51/308
EDMT34-635A Specifications
FXCQ-M 45
4
Ceiling mounted cassette (Double flow) type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6 Refer to page 53 for Fan Motor Input.
Model FXCQ50MVE FXCQ63MVE FXCQ80MVE FXCQ125MVE
Power supply 1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 5,000 6,300 8,000 12,500
Btu/h 19,800 24,900 31,700 49,500
kW 5.8 7.3 9.3 14.5
2 4 Cooling capacity (19°CWB) kW 5.6 7.1 9.0 14.0
3 4 Heating capacity
kcal/h 5,400 6,900 8,600 13,800
Btu/h 21,500 27,300 34,100 54,600
kW 6.3 8.0 10.0 16.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 305×990×600 305×1,175×600 305×1,665×600 305×1,665×600
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×10×1.5 2×10×1.5 2×10×1.5 2×10×1.5
Face area m² 2×0.145 2×0.184 2×0.287 2×0.287
Fan
Model 2D17K1AA1 2D17K2AA1VE 3D17K2AA1 3D17K2AB1
Type Sirocco fan Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 20×1 30×1 50×1 85×1
Airflow rate (H/L)
m³/min 12/9 16.5/13 26/21 33/25
l/s 200/150 275/216 433/350 550/416
cfm 424/318 582/459 918/741 1,165/883
Drive Direct drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Sound absorbing thermal insulation material Glass wool/Urethane foam Glass wool/Urethane foam Glass wool/Urethane foam Glass wool/Urethane foam
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection)
Drain pipe mmVP25
External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
Mass (Weight) kg 32 35 47 48
5 Sound level (H/L)220V, 50/60Hz
dB(A)34/29 37/32 39/34 44/38
240V, 50Hz 37/32 39/34 41/36 46/40
Safety devices Fuse. Thermal protector forfan motor.
Fuse. Thermal protector forfan motor.
Fuse. Thermal protector forfan motor.
Fuse. Thermal protector forfan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Decorationpanels(Option)
Model BYBC50G-W1 BYBC63G-W1 BYBC125G-W1 BYBC125G-W1
Panel colour White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Dimensions: (H×W×D) mm 53×1,245×680 53×1,430×680 53×1,920×680 53×1,920×680
Air filter Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Mass (Weight) kg 8.5 9.5 12 12
Standard accessories
Operation manual.Installation manual. Paperpattern for installation.Washer for hangingbrackets. Clamp metal.Drain hose. Insulation forfitting. Washer fixing plates.Sealing pads. Clamps.Screws. Washers.
Operation manual.Installation manual. Paperpattern for installation.Washer for hangingbrackets. Clamp metal.Drain hose. Insulation forfitting. Washer fixing plates.Sealing pads. Clamps.Screws. Washers.
Operation manual.Installation manual. Paperpattern for installation.Washer for hangingbrackets. Clamp metal.Drain hose. Insulation forfitting. Washer fixing plates.Sealing pads. Clamps.Screws. Washers.
Operation manual.Installation manual. Paperpattern for installation.Washer for hangingbrackets. Clamp metal.Drain hose. Insulation forfitting. Washer fixing plates.Sealing pads. Clamps.Screws. Washers.
Standard accessories C: 3D039413
( ) ( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 52/308
Dimensions EDMT34-635A
46 FXCQ-M
2. Dimensions
FXCQ20MVE + BYBC32G-W1 (Decoration panel)
FXCQ25MVE + BYBC32G-W1 (Decoration panel)
FXCQ32MVE + BYBC32G-W1 (Decoration panel) Unit (mm)
3 D 0 3 9 4 0 5 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 53/308
EDMT34-635A Dimensions
FXCQ-M 47
4
FXCQ40MVE + BYBC50G-W1 (Decoration panel)
FXCQ50MVE + BYBC50G-W1 (Decoration panel) Unit (mm)
3 D 0 3 9 4 0 6 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 54/308
Dimensions EDMT34-635A
48 FXCQ-M
FXCQ63MVE + BYBC63G-W1 (Decoration panel)Unit (mm)
3 D 0 3 9 4 0 7 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 55/308
EDMT34-635A Dimensions
FXCQ-M 49
4
FXCQ80MVE + BYBC125G-W1 (Decoration panel)
FXCQ125MVE + BYBC125G-W1 (Decoration panel)Unit (mm)
3 D 0 3 9 4
0 9 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 56/308
Piping Diagrams EDMT34-635A
50 FXCQ-M
3. Piping Diagrams
Refrigerant pipe connection port diameters
4D034245G
(mm)
Model Gas LiquidFXCQ20MVE / FXCQ25MVE / FXCQ32MVE / FXCQ40MVE / FXCQ50MVE φ12.7 φ6.4
FXCQ63MVE / FXCQ80MVE / FXCQ125MVE φ15.9 φ9.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 57/308
EDMT34-635A Wiring Diagrams
FXCQ-M 51
4
4. Wiring Diagrams
FXCQ20MVE / FXCQ25MVE / FXCQ32MVE / FXCQ63MVE
C :
3 D 0
3 9 5 5 8 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 58/308
Wiring Diagrams EDMT34-635A
52 FXCQ-M
FXCQ40MVE / FXCQ50MVE / FXCQ80MVE / FXCQ125MVE
C :
3 D 0 3 9 5 5 9 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 59/308
EDMT34-635A Electric Characteristics
FXCQ-M 53
4
5. Electric Characteristics
C: 4D034243B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 60/308
Safety Devices Setting EDMT34-635A
54 FXCQ-M
6. Safety Devices Setting
C: 3D040447A
Model FXCQ20MVE FXCQ25MVE FXCQ32MVE FXCQ40MVE FXCQ50MVE FXCQ63MVE FXCQ80MVE FXCQ125MVE
Printed circuit board fuse 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A
Fan motor thermal fuse °C 152±2 152±2 152±2 152±2 152±2 – – –
Fan motor thermal protector °COFF: 130±5(ON: 90±15)
OFF: 130±5(ON: 90±15)
OFF: 130±5(ON: 90±15) – –
OFF: 135±8(ON: 87±15)
OFF: 135±8(ON: 87±15)
OFF: 135±8(ON: 87±15)
Drain pump thermal fuse °C 169 169 169 169 169 169 169 169
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 61/308
EDMT34-635A Capacity Tables
FXCQ-M 55
4
7. Capacity Tables
7.1 Cooling Capacity
FXCQ-M [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB 14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB
20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB 20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC °CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
20
10.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.9 1.7
63
10.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.5 5.0 9.3 5.012.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.9 1.7 12.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.5 5.0 9.2 5.014.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.8 1.7 14.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.5 5.0 9.1 4.916.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.8 1.7 16.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.5 5.0 9.0 4.918.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.7 1.7 18.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.5 5.0 8.8 4.820.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.7 1.6 20.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.5 5.0 8.7 4.721.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.7 1.6 21.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.5 5.0 8.7 4.723.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.6 1.6 23.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.4 4.9 8.5 4.625.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.6 1.6 25.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.3 4.9 8.4 4.627.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.5 1.7 2.6 1.6 27.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.1 4.8 8.3 4.529.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.5 1.7 2.5 1.6 29.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 8.0 4.7 8.2 4.531.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.4 1.7 2.5 1.5 31.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 7.9 4.7 8.1 4.433.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.4 1.6 2.5 1.5 33.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.6 4.9 7.8 4.6 7.9 4.435.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.4 1.6 2.4 1.5 35.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.5 4.8 7.7 4.6 7.8 4.437.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.3 1.6 2.4 1.5 37.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.4 4.8 7.5 4.5 7.7 4.339.0 1.5 1.4 1.8 1.5 2.1 1.7 2.2 1.7 2.2 1.7 2.3 1.6 2.3 1.5 39.0 4.8 3.8 5.7 4.2 6.6 4.7 7.1 4.9 7.2 4.7 7.4 4.5 7.6 4.3
25
10.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.4 2.2 3.7 2.2
80
10.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.8 6.8 11.8 6.712.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.4 2.2 3.6 2.2 12.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.8 6.8 11.7 6.614.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.4 2.2 3.6 2.2 14.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.8 6.8 11.5 6.6
16.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.4 2.2 3.5 2.2 16.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.8 6.8 11.4 6.518.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.4 2.2 3.5 2.1 18.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.8 6.8 11.2 6.420.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.4 2.2 3.4 2.1 20.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.8 6.8 11.1 6.321.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.4 2.2 3.4 2.1 21.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.8 6.8 11.0 6.323.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.3 2.2 3.4 2.1 23.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.6 6.7 10.8 6.325.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.3 2.2 3.3 2.1 25.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.5 6.6 10.7 6.227.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.2 2.2 3.3 2.0 27.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.3 6.6 10.5 6.129.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.2 2.1 3.2 2.0 29.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.2 6.5 10.4 6.031.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.1 2.1 3.2 2.0 31.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 10.0 6.4 10.2 6.033.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.1 2.1 3.1 2.0 33.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.6 6.5 9.8 6.3 10.1 5.935.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 3.0 2.2 3.0 2.1 3.1 1.9 35.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.5 6.4 9.7 6.3 9.9 5.837.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 2.9 2.2 3.0 2.0 3.0 1.9 37.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.3 6.4 9.5 6.2 9.8 5.739.0 1.9 1.7 2.3 1.9 2.6 2.1 2.8 2.2 2.9 2.2 2.9 2.0 3.0 1.9 39.0 6.1 5.2 7.2 5.7 8.4 6.2 9.0 6.3 9.2 6.3 9.4 6.1 9.6 5.7
32
10.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.3 2.7 4.7 2.7
125
10.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.8 10.2 18.4 10.312.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.3 2.7 4.7 2.7 12.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.8 10.2 18.2 10.214.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.3 2.7 4.6 2.7 14.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.8 10.2 18.0 10.116.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.3 2.7 4.6 2.6 16.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.8 10.2 17.7 9.918.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.3 2.7 4.5 2.6 18.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.8 10.2 17.5 9.820.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.3 2.7 4.4 2.5 20.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.8 10.2 17.2 9.721.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.3 2.7 4.4 2.5 21.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.8 10.2 17.1 9.623.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.2 2.6 4.3 2.5 23.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.5 10.1 16.9 9.525.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.2 2.6 4.3 2.5 25.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.3 10.0 16.6 9.4
27.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.1 2.6 4.2 2.4 27.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 16.1 9.8 16.4 9.329.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.1 2.5 4.2 2.4 29.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 15.8 9.7 16.2 9.331.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 4.0 2.5 4.1 2.4 31.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 15.6 9.6 15.9 9.233.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 3.9 2.5 4.0 2.4 33.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.9 9.9 15.3 9.5 15.7 9.135.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.8 2.6 3.9 2.5 4.0 2.4 35.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.8 9.9 15.1 9.4 15.4 9.037.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.7 2.6 3.8 2.5 3.9 2.3 37.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.7 14.5 9.7 14.9 9.3 15.2 8.939.0 2.4 2.1 2.9 2.3 3.4 2.5 3.6 2.6 3.7 2.6 3.8 2.4 3.8 2.3 39.0 9.5 7.8 11.3 8.6 13.1 9.5 14.0 9.8 14.3 9.6 14.6 9.2 15.0 8.8
40
10.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.4 3.3 5.9 3.312.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.4 3.3 5.8 3.314.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.4 3.3 5.8 3.216.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.4 3.3 5.7 3.218.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.4 3.3 5.6 3.220.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.4 3.3 5.5 3.121.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.4 3.3 5.5 3.123.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.3 3.3 5.4 3.125.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.2 3.3 5.3 3.127.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.2 3.2 5.3 3.029.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.1 3.2 5.2 3.031.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 5.0 3.1 5.1 2.933.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.8 3.3 4.9 3.1 5.0 2.935.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.7 3.3 4.9 3.1 5.0 2.9
37.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.7 3.2 4.8 3.0 4.9 2.839.0 3.0 2.5 3.6 2.8 4.2 3.1 4.5 3.2 4.6 3.2 4.7 3.0 4.8 2.8
50
10.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.4 4.012.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.3 4.014.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.2 4.016.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.1 3.918.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.0 3.920.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 6.9 3.821.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 6.8 3.823.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.6 4.0 6.7 3.825.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.5 4.0 6.6 3.727.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.4 3.9 6.6 3.729.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.3 3.9 6.5 3.631.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.2 3.8 6.4 3.633.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.1 3.8 6.3 3.635.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 5.9 4.0 6.0 3.8 6.2 3.537.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 5.8 3.9 5.9 3.7 6.1 3.539.0 3.8 3.1 4.5 3.4 5.2 3.8 5.6 3.9 5.7 3.9 5.8 3.7 6.0 3.4
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 62/308
Capacity Tables EDMT34-635A
56 FXCQ-M
7.2 Heating Capacity
FXCQ-M [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDBUnitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0 16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW °CDB °CWB kW kW kW kW kW kW
20
-19.8 -20.0 1.5 1.5 1.5 1.5 1.5 1.5
63
-19.8 -20.0 4.7 4.7 4.7 4.7 4.7 4.7-18.8 -19.0 1.5 1.5 1.5 1.5 1.5 1.5 -18.8 -19.0 4.9 4.9 4.8 4.8 4.8 4.8
-16.7 -17.0 1.6 1.6 1.6 1.6 1.6 1.6 -16.7 -17.0 5.1 5.1 5.1 5.1 5.1 5.1-14.7 -15.0 1.7 1.7 1.7 1.7 1.7 1.7 -14.7 -15.0 5.4 5.4 5.4 5.4 5.4 5.4-12.6 -13.0 1.8 1.8 1.8 1.8 1.8 1.8 -12.6 -13.0 5.7 5.7 5.7 5.7 5.7 5.7-10.5 -11.0 1.9 1.9 1.9 1.9 1.9 1.9 -10.5 -11.0 6.0 6.0 6.0 6.0 6.0 5.9-9.5 -10.0 1.9 1.9 1.9 1.9 1.9 1.9 -9.5 -10.0 6.1 6.1 6.1 6.1 6.1 6.1-8.5 -9.1 2.0 2.0 1.9 1.9 1.9 1.9 -8.5 -9.1 6.3 6.3 6.2 6.2 6.2 6.2-7.0 -7.6 2.0 2.0 2.0 2.0 2.0 2.0 -7.0 -7.6 6.5 6.5 6.4 6.4 6.4 6.4-5.0 -5.6 2.1 2.1 2.1 2.1 2.1 2.1 -5.0 -5.6 6.8 6.7 6.7 6.7 6.7 6.7-3.0 -3.7 2.2 2.2 2.2 2.2 2.2 2.2 -3.0 -3.7 7.0 7.0 7.0 7.0 7.0 7.00.0 -0.7 2.3 2.3 2.3 2.3 2.3 2.2 0.0 -0.7 7.5 7.4 7.4 7.4 7.4 7.03.0 2.2 2.5 2.5 2.4 2.4 2.3 2.2 3.0 2.2 7.9 7.8 7.8 7.7 7.5 7.05.0 4.1 2.5 2.5 2.5 2.4 2.3 2.2 5.0 4.1 8.1 8.1 8.0 7.7 7.5 7.07.0 6.0 2.6 2.6 2.5 2.4 2.3 2.2 7.0 6.0 8.4 8.4 8.0 7.7 7.5 7.09.0 7.9 2.7 2.7 2.5 2.4 2.3 2.2 9.0 7.9 8.7 8.5 8.0 7.7 7.5 7.011.0 9.8 2.8 2.7 2.5 2.4 2.3 2.2 11.0 9.8 8.9 8.5 8.0 7.7 7.5 7.013.0 11.8 2.8 2.7 2.5 2.4 2.3 2.2 13.0 11.8 9.0 8.5 8.0 7.7 7.5 7.015.0 13.7 2.8 2.7 2.5 2.4 2.3 2.2 15.0 13.7 9.0 8.5 8.0 7.7 7.5 7.0
25
-19.8 -20.0 1.9 1.9 1.9 1.9 1.9 1.9
80
-19.8 -20.0 5.9 5.9 5.9 5.9 5.9 5.8-18.8 -19.0 1.9 1.9 1.9 1.9 1.9 1.9 -18.8 -19.0 6.1 6.1 6.0 6.0 6.0 6.0-16.7 -17.0 2.1 2.1 2.0 2.0 2.0 2.0 -16.7 -17.0 6.4 6.4 6.4 6.4 6.4 6.4-14.7 -15.0 2.2 2.2 2.2 2.2 2.2 2.1 -14.7 -15.0 6.8 6.8 6.8 6.7 6.7 6.7-12.6 -13.0 2.3 2.3 2.3 2.3 2.3 2.3 -12.6 -13.0 7.1 7.1 7.1 7.1 7.1 7.1
-10.5 -11.0 2.4 2.4 2.4 2.4 2.4 2.4 -10.5 -11.0 7.5 7.5 7.5 7.5 7.4 7.4-9.5 -10.0 2.5 2.4 2.4 2.4 2.4 2.4 -9.5 -10.0 7.7 7.7 7.6 7.6 7.6 7.6-8.5 -9.1 2.5 2.5 2.5 2.5 2.5 2.5 -8.5 -9.1 7.8 7.8 7.8 7.8 7.8 7.8-7.0 -7.6 2.6 2.6 2.6 2.6 2.6 2.6 -7.0 -7.6 8.1 8.1 8.1 8.1 8.0 8.0-5.0 -5.6 2.7 2.7 2.7 2.7 2.7 2.7 -5.0 -5.6 8.4 8.4 8.4 8.4 8.4 8.4-3.0 -3.7 2.8 2.8 2.8 2.8 2.8 2.8 -3.0 -3.7 8.8 8.8 8.7 8.7 8.7 8.70.0 -0.7 3.0 3.0 3.0 3.0 3.0 2.8 0.0 -0.7 9.3 9.3 9.3 9.3 9.3 8.73.0 2.2 3.1 3.1 3.1 3.1 3.0 2.8 3.0 2.2 9.8 9.8 9.8 9.7 9.4 8.75.0 4.1 3.3 3.2 3.2 3.1 3.0 2.8 5.0 4.1 10.2 10.1 10.0 9.7 9.4 8.77.0 6.0 3.4 3.4 3.2 3.1 3.0 2.8 7.0 6.0 10.5 10.5 10.0 9.7 9.4 8.79.0 7.9 3.5 3.4 3.2 3.1 3.0 2.8 9.0 7.9 10.8 10.6 10.0 9.7 9.4 8.711.0 9.8 3.6 3.4 3.2 3.1 3.0 2.8 11.0 9.8 11.2 10.6 10.0 9.7 9.4 8.713.0 11.8 3.6 3.4 3.2 3.1 3.0 2.8 13.0 11.8 11.3 10.6 10.0 9.7 9.4 8.715.0 13.7 3.6 3.4 3.2 3.1 3.0 2.8 15.0 13.7 11.3 10.6 10.0 9.7 9.4 8.7
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3
125
-19.8 -20.0 9.4 9.4 9.4 9.4 9.4 9.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4 -18.8 -19.0 9.7 9.7 9.7 9.7 9.6 9.6-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5 -16.7 -17.0 10.3 10.3 10.2 10.2 10.2 10.2-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7 -14.7 -15.0 10.9 10.8 10.8 10.8 10.8 10.7-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8 -12.6 -13.0 11.4 11.4 11.4 11.4 11.3 11.3-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0 -10.5 -11.0 12.0 12.0 11.9 11.9 11.9 11.9-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0 -9.5 -10.0 12.3 12.2 12.2 12.2 12.2 12.2
-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1 -8.5 -9.1 12.5 12.5 12.5 12.5 12.4 12.4-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2 -7.0 -7.6 13.0 12.9 12.9 12.9 12.9 12.8-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4 -5.0 -5.6 13.5 13.5 13.5 13.4 13.4 13.4-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.5 -3.0 -3.7 14.1 14.0 14.0 14.0 14.0 13.90.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.5 0.0 -0.7 14.9 14.9 14.8 14.8 14.8 13.93.0 2.2 3.9 3.9 3.9 3.9 3.7 3.5 3.0 2.2 15.7 15.7 15.7 15.5 15.0 13.95.0 4.1 4.1 4.1 4.0 3.9 3.7 3.5 5.0 4.1 16.3 16.2 16.0 15.5 15.0 13.97.0 6.0 4.2 4.2 4.0 3.9 3.7 3.5 7.0 6.0 16.8 16.8 16.0 15.5 15.0 13.99.0 7.9 4.3 4.3 4.0 3.9 3.7 3.5 9.0 7.9 17.3 17.0 16.0 15.5 15.0 13.911.0 9.8 4.5 4.3 4.0 3.9 3.7 3.5 11.0 9.8 17.9 17.0 16.0 15.5 15.0 13.913.0 11.8 4.5 4.3 4.0 3.9 3.7 3.5 13.0 11.8 18.1 17.0 16.0 15.5 15.0 13.915.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5 15.0 13.7 18.1 17.0 16.0 15.5 15.0 13.9
40
-19.8 -20.0 3.0 2.9 2.9 2.9 2.9 2.9-18.8 -19.0 3.0 3.0 3.0 3.0 3.0 3.0-16.7 -17.0 3.2 3.2 3.2 3.2 3.2 3.2-14.7 -15.0 3.4 3.4 3.4 3.4 3.4 3.4-12.6 -13.0 3.6 3.6 3.6 3.5 3.5 3.5-10.5 -11.0 3.7 3.7 3.7 3.7 3.7 3.7-9.5 -10.0 3.8 3.8 3.8 3.8 3.8 3.8-8.5 -9.1 3.9 3.9 3.9 3.9 3.9 3.9-7.0 -7.6 4.0 4.0 4.0 4.0 4.0 4.0-5.0 -5.6 4.2 4.2 4.2 4.2 4.2 4.2
-3.0 -3.7 4.4 4.4 4.4 4.4 4.4 4.40.0 -0.7 4.7 4.6 4.6 4.6 4.6 4.43.0 2.2 4.9 4.9 4.9 4.8 4.7 4.45.0 4.1 5.1 5.1 5.0 4.8 4.7 4.47.0 6.0 5.2 5.2 5.0 4.8 4.7 4.49.0 7.9 5.4 5.3 5.0 4.8 4.7 4.411.0 9.8 5.6 5.3 5.0 4.8 4.7 4.413.0 11.8 5.6 5.3 5.0 4.8 4.7 4.415.0 13.7 5.6 5.3 5.0 4.8 4.7 4.4
50
-19.8 -20.0 3.7 3.7 3.7 3.7 3.7 3.7-18.8 -19.0 3.8 3.8 3.8 3.8 3.8 3.8-16.7 -17.0 4.1 4.0 4.0 4.0 4.0 4.0-14.7 -15.0 4.3 4.3 4.3 4.2 4.2 4.2-12.6 -13.0 4.5 4.5 4.5 4.5 4.5 4.5-10.5 -11.0 4.7 4.7 4.7 4.7 4.7 4.7-9.5 -10.0 4.8 4.8 4.8 4.8 4.8 4.8-8.5 -9.1 4.9 4.9 4.9 4.9 4.9 4.9-7.0 -7.6 5.1 5.1 5.1 5.1 5.1 5.1-5.0 -5.6 5.3 5.3 5.3 5.3 5.3 5.3-3.0 -3.7 5.5 5.5 5.5 5.5 5.5 5.50.0 -0.7 5.9 5.9 5.8 5.8 5.8 5.5
3.0 2.2 6.2 6.2 6.2 6.1 5.9 5.55.0 4.1 6.4 6.4 6.3 6.1 5.9 5.57.0 6.0 6.6 6.6 6.3 6.1 5.9 5.59.0 7.9 6.8 6.7 6.3 6.1 5.9 5.511.0 9.8 7.0 6.7 6.3 6.1 5.9 5.513.0 11.8 7.1 6.7 6.3 6.1 5.9 5.515.0 13.7 7.1 6.7 6.3 6.1 5.9 5.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 63/308
EDMT34-635A Air Velocity and Temperature Distributions (Reference Data)
FXCQ-M 57
4
8. Air Velocity and Temperature Distributions
(Reference Data)
FXCQ63MVE
(Heating · Air velocity distribution)
Discharge angle : 60°
FXCQ63MVE
(Heating · Temperature distribution)
Discharge angle : 60°
Note:
The standard setup height of the double flow type is 3 m maximum. Shown here is the measurement distribution at
the ceiling height of 3 m.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 64/308
Air Velocity and Temperature Distributions (Reference Data) EDMT34-635A
58 FXCQ-M
FXCQ125MVE
(Heating · Air velocity distribution)
Discharge angle : 60°
FXCQ125MVE
(Heating · Temperature distribution)
Discharge angle : 60°
Note:
The standard setup height of the double flow type is 3 m maximum. Shown here is the measurement distribution at
the ceiling height of 3 m.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 65/308
EDMT34-635A Sound Levels
FXCQ-M 59
4
9. Sound Levels
Overall
Octave Band Level
220V, 50/60Hz
240V, 50Hz
Location of microphone Notes:
1. The operating conditions are assumed to be standard
(JIS conditions).
2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipment installed.
dB(A)
Model220V, 50/60Hz 240V, 50Hz
H L H L
FXCQ20MVE 32 27 34 29FXCQ25MVEFXCQ32MVE
34 28 36 30
FXCQ40MVEFXCQ50MVE
34 29 37 32
FXCQ63MVE 37 32 39 34
FXCQ80MVE 39 34 41 36
FXCQ125MVE 44 38 46 40
FXCQ20MVE FXCQ25MVE / FXCQ32MVE FXCQ40MVE / FXCQ50MVE
FXCQ63MVE FXCQ80MVE FXCQ125MVE
Microphone
4D034329 4D034330 4D034331
4D034332 4D034333 4D034334
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 66/308
Centre of Gravity EDMT34-635A
60 FXCQ-M
10.Centre of Gravity
FXCQ20MVE / FXCQ25MVE / FXCQ32MVE / FXCQ40MVE / FXCQ50MVE / FXCQ63MVE / FXCQ80MVE /
FXCQ125MVEUnit (mm)
C: 4D034788C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 67/308
EDMT34-635A Accessories
FXCQ-M 61
4
11.Accessories
11.1 Optional Accessories (for Unit)
3D035093D
Note:
1. Filter chamber is required if installing high efficiency filter.
11.2 Optional Accessories (for Controls)
Refer to page 282.
ModelFXCQ20MVEFXCQ25MVEFXCQ32MVE
FXCQ40MVE FXCQ50MVE FXCQ63MVE FXCQ80MVE FXCQ125MVE
Decoration panel BYBC32G-W1 BYBC50G-W1 BYBC63G-W1 BYBC125G-W1
Filterrelated
High efficiency filter 65%1
KAFJ532G36 KAFJ532G56 KAFJ532G80 KAFJ532G160
High efficiency filter 90%1
KAFJ533G36 KAFJ533G56 KAFJ533G80 KAFJ533G160
Filterchamber
Bottomsuction
KDDFJ53G36 KDDFJ53G56 KDDFJ53G80 KDDFJ53G160
Long life replacementfilter
KAFJ531G36 KAFJ531G56 KAFJ531G80 KAFJ531G160
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 68/308
Accessories EDMT34-635A
62 FXCQ-M
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 69/308
EDMT34-635A
FXKQ-MA 63
5
FXKQ-MA
Ceiling Mounted Cassette
Corner Type
1. Specifications........................................................................................64
2. Dimensions ...........................................................................................65
3. Piping Diagrams....................................................................................67
4. Wiring Diagrams....................................................................................68
5. Electric Characteristics..........................................................................69
6. Safety Devices Setting..........................................................................70
7. Capacity Tables ....................................................................................717.1 Cooling Capacity ....................................................................................71
7.2 Heating Capacity ....................................................................................72
8. Air Velocity and Temperature Distributions (Reference Data) ..............73
9. Sound Levels ........................................................................................74
10.Centre of Gravity ...................................................................................75
11.Accessories...........................................................................................7611.1 Optional Accessories (for Unit)...............................................................76
11.2 Optional Accessories (for Controls)........................................................76
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 70/308
Specifications EDMT34-635A
64 FXKQ-MA
1. Specifications
Ceiling mounted cassette corner type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values
are normally somewhat higher as a result of ambient conditions.
6 Refer to page 69 for Fan Motor Input.
Model FXKQ25MAVE FXKQ32MAVE FXKQ40MAVE FXKQ63MAVE
Power supply 1 phase, 220-240/220V, 50/60Hz
1 phase, 220-240/220V, 50/60Hz
1 phase, 220-240/220V, 50/60Hz
1 phase, 220-240/220V, 50/60Hz
1 4 Cooling capacity (19.5°CWB)kcal/h 2,500 3,200 4,000 6,300Btu/h 9,900 12,600 16,000 24,900
kW 2.9 3.7 4.7 7.3
2 4 Cooling capacity (19°CWB) kW 2.8 3.6 4.5 7.1
3 4 Heating capacity
kcal/h 2,800 3,400 4,300 6,900
Btu/h 10,900 13,600 17,100 27,300
kW 3.2 4.0 5.0 8.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 215×1,110×710 215×1,110×710 215×1,110×710 215×1,310×710
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×11×1.75 2×11×1.75 2×11×1.75 3×11×1.75
Face area m² 0.180 0.180 0.180 0.226
Fan
Model 3D12H1AN1V1 3D12H1AN1V1 3D12H1AP1V1 4D12H1AJ1V1
Type Sirocco fan Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 15×1 15×1 20×1 45×1
Airflow rate(H/L)
50 Hz
m³/min 11/9 11/9 13/10 18/15
l/s 183/150 183/150 216/166 300/250
cfm 388/318 388/318 459/353 635/530
60 Hz
m³/min 11/8.5 11/8.5 13/10 18/13
l/s 183/141 183/141 216/166 300/216
cfm 388/300 388/300 459/353 635/459
Drive Direct drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Sound absorbing thermal insulation material Polyethylene foam Polyethylene foam Polyethylene foam Polyethylene foam
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection)
Drain pipe mmVP25
External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
Mass (Weight) kg 31 31 31 34
5 Sound level (H/L)220V, 50/60Hz
dB(A)38/33 38/33 40/34 42/37
240V, 50Hz 40/35 40/35 42/36 44/39
Safety devices Fuse.Thermal fuse for fan motor.
Fuse.Thermal fuse for fan motor.
Fuse.Thermal fuse for fan motor.
Fuse.Thermal fuse for fan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Decorationpanels(Option)
Model BYK45FJW1 BYK45FJW1 BYK45FJW1 BYK71FJW1
Panel colour White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Dimensions: (H×W×D) mm 70×1,240×800 70×1,240×800 70×1,240×800 70×1,440×800
Air filter Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Resin net(with mould resistance)
Mass (Weight) kg 8.5 8.5 8.5 9.5
Standard accessories
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal.
Insulation for fitting. Sealingpads. Clamps. Screws.Washers. Positioning jig forinstallation. Insulation forhanger bracket. Air outletblocking pad.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal.
Insulation for fitting. Sealingpads. Clamps. Screws.Washers. Positioning jig forinstallation. Insulation forhanger bracket. Air outletblocking pad.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal.
Insulation for fitting. Sealingpads. Clamps. Screws.Washers. Positioning jig forinstallation. Insulation forhanger bracket. Air outletblocking pad.
Operation manual.Installation manual. Paperpattern for installation. Drainhose. Clamp metal.
Insulation for fitting. Sealingpads. Clamps. Screws.Washers. Positioning jig forinstallation. Insulation forhanger bracket. Air outletblocking pad.
Drawing No. C: 3D038813A
( ) ( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 71/308
EDMT34-635A Dimensions
FXKQ-MA 65
5
2. Dimensions
FXKQ25MAVE + BYK45FJW1 (Decoration panel)
FXKQ32MAVE + BYK45FJW1 (Decoration panel)
FXKQ40MAVE + BYK45FJW1 (Decoration panel) Unit (mm)
1 2 0 0 ( C e
i l i n g o p e n
i n g
)
5
1 0 0 0 o r m o r e
7 1 0
S u s p e n s
i o n
b o
l t
1 4 0
1 4 0
1 1 5 0 ( S u s p e n s
i o n p o s
i t i o n
)
2 0
2 1 5
2 1 5
4 5
1 2 5 1 4 8
8 0 0
1 0 0
2 0
2 3 3
2 6 0
F r o n
t d i s c
h a r g e
d u c
t p o s
i t i o n
2 0
5 2 0
2 8 0
1 2 4 0
1 7 0
3 5 0 ( S u s p e n s i o n p o s i t i o n )
4 - M
4 h o
l e
1 2 0
2 5 0
2 0 0 m m o r m o r e
2 0 0 m m o r m o r e
2 0 m m o r m o r e
1 5 0 0 m m o r m o r e
1 7 0
6 5 1 9 0
5 6 7
6 5
4 5
2 0
1 1 1 0
7 6 0 ( C e i l i n g o p e n i n g )
1 0
D i s c
h a r g e
G a s
p i p e c o n n e c
t i o n
G r o
u n
d i n g
t e r m
i n a
l
N o
t e s :
1 .
L o c a
t i o n o
f u n
i t ' s N a m e p l a
t e
·
F o r m a
i n b o
d y :
B o
t t o m p a r t o
f f a n
h o u s
i n g
i n s
i d e o
f A i r
s u c
t i o n g r i l l e .
·
F o r
d e c o r a
t i o n p a n e
l : S e r v
i c e
l i d f a c e
i n s
i d e o
f A i r
s u c
t i o n g r i l l e .
2 .
W h e n
i n s
t a l l i n g a n o p
t i o n a
l a c c e s s o r y ,
r e f e r
t o t h e
i n s
t a l l a t i o n
d r a w
i n g s .
3
φ 1 2 . 7 f l a r e c o n n e c t i o n
1
5
I n s i d e s w i t c h b o x ( M 4 )
N u m
b e r
9
7
4 - M
8 ~
M 1 0
2
L o n
g l i f e f i l t e r
φ 6 . 4 f l a r e c o n n e c t i o n
4
R e q u i r e d
i n s t a l l a t i o n s p a c e
V P 2 5 ( O
. D .
φ 3 2 )
N a m e
D e s c r i p
t i o n
S u s
p e n s
i o n
b o
l t
D r a
i n p
i p e c o n n e c
t i o n
A i r s u c
t i o n g r i l l e
8
W i r e
i n t a k e
6
• R e q u i r e
d i n s
t a l l a t i o n s p a c e
I n t e r u n i t w i r i n g c o n n e c t i o n
3 2 9 7 1 1 0 5 6 8 4
L i q u
i d p
i p e c o n n e c
t i o n
C :
3 D 0 3 8 8 4 0
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 72/308
Dimensions EDMT34-635A
66 FXKQ-MA
FXKQ63MAVE + BYK71FJW1 (Decoration panel)Unit (mm)
7 6 0 ( C e i l i n g o p e n i n g )
1 4 4 0
2 3 3
7 1 0
1 0 0 0 o r m o r e F r o n
t d i s c
h a r g e
d u c
t p o s
i t i o n
1 4 8
1 2 0
4 5
5
2 1 5
1 4 0
2 0
8 0 0
5 6 5
2 0
4 5 2 1 5
S u s p e n s
i o n
b o
l t
1 7 0
1 3 1 0
6 5
7 2 0
2 8 0
6 7
1 0 0
2 0 1 4 0
1 7 0
6 - M
4 h o
l e
2 5 0
3 5 0 ( S u s p e n s i o n p o s i t i o n )
1 9 0
2 ×
2 3 0 =
4 6 0
1 2 5
1 3 5 0 ( S u s p e n s
i o n p o
s i t i o n
)
1 4 0 0 ( C e
i l i n g o p e n
i n g
)
2 0
6
8 7
R e q u i r e d
i n s t a l l a t i o n
s p a c e
2
5
9
4 - M
8 ~
M 1 0
1
3
1 0
4
2 0 0 m m
o r m o r e
2 0 0 m m o r m o r e
2 0 m m o r m o r
e
1 5 0 0 m
m o r m o r e
• R e q u
i r e d i n s
t a l l a t i o n s p a c e
D i s c
h a r g e
G a s p
i p e c o n n e c
t i o n
G r o u n
d i n g
t e r m
i n a
l
N o
t e s :
1 .
L o c a
t i o n o
f u n
i t ' s N a m e p
l a t e
·
F o r m a i n
b o
d y :
B o
t t o m p a r t o
f f a n
h o u s
i n g
i n s
i d e o
f A i r
s u c
t i o n g r i l l e .
·
F o r
d e c o r
a t i o n p a n e
l : S e r v
i c e
l i d f a c e
i n s
i d e o
f A i r
s u c
t i o n g r i l l e .
2 .
W h e n
i n s t a
l l i n g a n o p
t i o n a
l a c c e s s o r y ,
r e f e r
t o t h e
i n s
t a l l a t i o n
d r a w
i n g s .
φ 1 5 . 9 f l a r e c o n n e c t i o n
I n s i d e s w i t c h b o x ( M 4 )
N u m
b e r
L o n g
l i f e f i l t e r
φ 9 . 5 f l a r e c o n
n e c t i o n
V P 2 5 ( O
. D .
φ 3 2 )
N a m e
D e s c r i p
t i o n
S u s p e n s
i o n
b o
l t
D r a
i n p
i p e c o n n e c
t i o n
A i r s u c
t i o n g r i l l e
W i r e i n t a k e
I n t e r u n i t w i r i n g c o n n e c t i o n
3 2 9 7 1 1 0 5 6 8 4
L i q u
i d p
i p e c o n n e c
t i o n
C :
3 D 0 3 8 8 4 1
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 73/308
EDMT34-635A Piping Diagrams
FXKQ-MA 67
5
3. Piping Diagrams
Refrigerant pipe connection port diameters
4D034245G
(mm)
Model Gas LiquidFXKQ25MAVE / FXKQ32MAVE / FXKQ40MAVE φ12.7 φ6.4
FXKQ63MAVE φ15.9 φ9.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 74/308
Wiring Diagrams EDMT34-635A
68 FXKQ-MA
4. Wiring Diagrams
FXKQ25MAVE / FXKQ32MAVE / FXKQ40MAVE / FXKQ63MAVE
H A P
A 2 P
Y C
Y 1
X 4 A
F H
X 1 M
2 2 0 - 2
4 0 V
~ 5 0 H z
P O W E R S U P P L Y
2 2 0 V
~
6 0 H z
O R G
A 1 P
B L K
X 3 A
X 1 A
t ˚
X 1 2 A
X 1 3 A
X
1 8 A
Y C
X 1 6 A
F L L
W H T
X 2 A
L L
W H T
M S W ~
M ~
M ~
K P R
S 1 L
R 3 T
X 1 M
X 1 1 A
R E D
B L K
L
S 1 Q
B L K
K A R
L L
R E D R
E D
B L K
O R G
B R N
A 1 P
N
B R N
X 1 A
F H
C 1
F L
N
R 2 T
A 2 P
T 1 R
A 2 P
O R G
B L K
R E D
B R N
O R G
K 2 R
X 1 A
N O T E - 5
G R N /
Y L W
Q 1 M
M 1 F
Y L W
F 1 U
Y 2
G R Y
L
B R N
T 1 R
X 8
A
G R Y
R 1 T
C 1
X 9 A
X 2 A
F L L
K 3 R
F L
F C
X 6 A
t ˚
t ˚
t ˚
X 4 A
X 3 A
X 3 A
K 1 R
F C
R E D
X 2 M X
1 8 A
X 7 A
P 1
T 1
P 2
X 2 M
F 2
T 2
R 1 T
S S 1
T 2
P 2
F 1
F 2
P 1
T 1
P N K
B L U
O R G
Y L W
B L K
W H T
F 1
P 1
P 2
X 3 0 A
X 1 6 A
M Y 1 E
W I R E D R E M O T E C O N T R O L L E R
( O P T I O N A L A C C E S S O R Y )
M 1 P
M 1 S R
E D
W
H T
W H T
E L E C T R I C P A R T S B O X
N O T E - 4
I N P U T F R O M O U T
S I D E
N O T E - 3
T R A N S M I S S I O N W
I R I N G
C E N T R A L R E M O T
E
C O N T R O L L E R
I N D O O R U N I T
P R I N T E D C I R C U I T B O A R D
T E R M I N A L B O A R D
C A P A C I T O R ( M 1 F )
F U S E (
, 5 A
, 2 5 0 V )
L I G H T E M I T T I N G D I O D E
( S E R V I C E M O N I T O R - G
R E E N )
M A G N E T I C R E L A Y ( M 1 F )
M A G N E T I C R E L A Y ( M 1 S )
M A G N E T I C R E L A Y ( M 1 P )
M O T O R ( I N D O O R F A N )
M O T O R ( D R A I N P U M P )
M O T O R ( S W I N G F L A P )
T H E R M O S W I T C H ( M 1 F E M B E D D E D )
A 1 P
A 2 P
C 1
F 1 U
H A P
K 1 R - K 3 R
K A R
K P R
M 1 F
M 1 P
M 1 S
Q 1 M
T H E R M I S T O R ( A I R )
T H E R M I S T O R ( C O I L )
F L O A T S W I T C H
L I M I T S W I T C H ( S W I N G F L A P )
T R A N S F O R M E R ( 2 2 0 - 2
4 0 V / 2 2 V )
E L E C T R O N I C E X P A N S I O N V A L V E
W I R E D R E M O T E C O N T R O L L E R
T H E R M I S T O R ( A I R )
S E L E C T O R S W I T C H ( M A I N / S U B )
C O N N E C T O R ( A D A P T O R F O R W I R I N G )
C O N N E C T O R ( W I R I N G A D A P T O R
F O R E L E C T R I C A L A P P E N D I C E S )
C O N N E C T O R F O R O P T I O N A L P A R T S
T E R M I N A L B L O C K ( C O N T R O L )
T E R M I N A L B L O C K ( P O W E R )
R 1 T
R 2 T · R 3 T
S 1 L
S 1 Q
T 1 R
X 2 M
Y 1 E
X 1 6 A
X 1 M
R 1 T
S S 1
X 1 8 A
B
N O T E
S ) 1
.
: T E R M I N A L B L O C K
,
,
: C
O N N E C T O R
,
: T E R M I N A L
2 .
:
: F I E L D W I R I N G
3 .
I N C A S E U S I N G C E N T R A L R E M O T E C O
N T R O L L E R
, C O N N E C T I T T O T H E U N I T I N A C
C O R D A N C E W I T H T H E A T T A C H E D I N S T R U C
T I O N M A N U A L
.
4 .
W H E N C O N N E C T I N G T H E I N P U T W I R E S F R O M O U T S I D E
, F O R C E D O F F O R O N / O F F
C O N T R O L O P E R A T I O N C A N B E S E L E C T E D
B Y R E M O T E C O N T R O L L E R
.
I N D E T A I L S
, R E F E R T O T H E I N S T A L L A T I O N M A N U A L A T T A C H E D T H E U N I T
.
5 .
I N C A S E H I G H E
. S
. P
. O P E R A T I O N
, C H
A N G E O V E R T H E W I R I N G C O N N E C T I O N F R O
M X 2 A T O X 3 A
.
6 .
S Y M B O L S S H O W
A S F O L L O W S
. ( P N K :
P I N K
W H T :
W H I T E
Y L W
: Y E L L O W
O R G : O
R A N G E
B L U :
B L U E
B L K :
B L A C K
R E D :
R E
D
B R N :
B R O W N
G R Y :
G R A Y )
7 .
U E S C O P P E R C O N D U C T O R S O N L Y
.
C :
3 D 0
3 9 5 6 4 C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 75/308
EDMT34-635A Electric Characteristics
FXKQ-MA 69
5
5. Electric Characteristics
FXKQ25MAVE
FXKQ32MAVE
FXKQ40MAVE
FXKQ63MAVE
FXKQ25MAVE
FXKQ32MAVE
FXKQ40MAVE
FXKQ63MAVE
C: 4D037076B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 76/308
Safety Devices Setting EDMT34-635A
70 FXKQ-MA
6. Safety Devices Setting
C: 3D034597J
Model FXKQ25MAVE FXKQ32MAVE FXKQ40MAVE FXKQ63MAVE
Printed circuit board fuse 250V 5A 250V 5A 250V 5A 250V 5A
Fan motor thermal fuse °C 146±3 146±3 – –
Fan motor thermal protector °C – –OFF: 120±5ON : 105 or less
OFF: 120±5ON : 105 or less
Drain pump thermal fuse °C 145 145 145 145
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 77/308
EDMT34-635A Capacity Tables
FXKQ-MA 71
5
7. Capacity Tables
7.1 Cooling Capacity
FXKQ-MA [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB
20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
25
10.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.4 2.5 3.7 2.512.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.4 2.5 3.6 2.514.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.4 2.5 3.6 2.516.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.4 2.5 3.5 2.418.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.4 2.5 3.5 2.420.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.4 2.5 3.4 2.421.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.4 2.5 3.4 2.423.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.3 2.5 3.4 2.325.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.3 2.5 3.3 2.327.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.2 2.4 3.3 2.329.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.2 2.4 3.2 2.331.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.1 2.4 3.2 2.333.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.1 2.4 3.1 2.335.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 3.0 2.5 3.0 2.4 3.1 2.337.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 2.9 2.5 3.0 2.4 3.0 2.339.0 1.9 1.9 2.3 2.2 2.6 2.3 2.8 2.4 2.9 2.5 2.9 2.3 3.0 2.2
32
10.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.3 2.9 4.7 2.912.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.3 2.9 4.7 2.914.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.3 2.9 4.6 2.9
16.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.3 2.9 4.6 2.818.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.3 2.9 4.5 2.820.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.3 2.9 4.4 2.821.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.3 2.9 4.4 2.723.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.2 2.9 4.3 2.725.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.2 2.8 4.3 2.727.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.1 2.8 4.2 2.729.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.1 2.8 4.2 2.631.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 4.0 2.7 4.1 2.633.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 3.9 2.7 4.0 2.635.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.8 2.9 3.9 2.7 4.0 2.637.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.7 2.8 3.8 2.7 3.9 2.639.0 2.4 2.2 2.9 2.5 3.4 2.6 3.6 2.7 3.7 2.8 3.8 2.7 3.8 2.6
40
10.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.4 3.5 5.9 3.512.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.4 3.5 5.8 3.514.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.4 3.5 5.8 3.416.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.4 3.5 5.7 3.418.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.4 3.5 5.6 3.320.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.4 3.5 5.5 3.321.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.4 3.5 5.5 3.323.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.3 3.4 5.4 3.225.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.2 3.4 5.3 3.2
27.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.2 3.3 5.3 3.229.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.1 3.3 5.2 3.131.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 5.0 3.2 5.1 3.133.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.8 3.3 4.9 3.2 5.0 3.135.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.7 3.3 4.9 3.2 5.0 3.037.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.7 3.3 4.8 3.1 4.9 3.039.0 3.0 2.6 3.6 2.8 4.2 3.2 4.5 3.2 4.6 3.2 4.7 3.1 4.8 3.0
63
10.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.5 5.4 9.3 5.612.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.5 5.4 9.2 5.514.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.5 5.4 9.1 5.416.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.5 5.4 9.0 5.318.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.5 5.4 8.8 5.320.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.5 5.4 8.7 5.221.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.5 5.4 8.7 5.223.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.4 5.3 8.5 5.125.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.3 5.3 8.4 5.027.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.1 5.2 8.3 5.029.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 8.0 5.1 8.2 4.931.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 7.9 5.1 8.1 4.933.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.6 5.2 7.8 5.0 7.9 4.835.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.5 5.2 7.7 5.0 7.8 4.8
37.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.4 5.1 7.5 4.9 7.7 4.839.0 4.8 4.0 5.7 4.5 6.6 5.0 7.1 5.1 7.2 5.0 7.4 4.9 7.6 4.7
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 78/308
Capacity Tables EDMT34-635A
72 FXKQ-MA
7.2 Heating Capacity
FXKQ-MA [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW
25
-19.8 -20.0 1.9 1.9 1.9 1.9 1.9 1.9-18.8 -19.0 1.9 1.9 1.9 1.9 1.9 1.9
-16.7 -17.0 2.1 2.1 2.0 2.0 2.0 2.0-14.7 -15.0 2.2 2.2 2.2 2.2 2.2 2.1-12.6 -13.0 2.3 2.3 2.3 2.3 2.3 2.3-10.5 -11.0 2.4 2.4 2.4 2.4 2.4 2.4-9.5 -10.0 2.5 2.4 2.4 2.4 2.4 2.4-8.5 -9.1 2.5 2.5 2.5 2.5 2.5 2.5-7.0 -7.6 2.6 2.6 2.6 2.6 2.6 2.6-5.0 -5.6 2.7 2.7 2.7 2.7 2.7 2.7-3.0 -3.7 2.8 2.8 2.8 2.8 2.8 2.80.0 -0.7 3.0 3.0 3.0 3.0 3.0 2.83.0 2.2 3.1 3.1 3.1 3.1 3.0 2.85.0 4.1 3.3 3.2 3.2 3.1 3.0 2.87.0 6.0 3.4 3.4 3.2 3.1 3.0 2.89.0 7.9 3.5 3.4 3.2 3.1 3.0 2.811.0 9.8 3.6 3.4 3.2 3.1 3.0 2.813.0 11.8 3.6 3.4 3.2 3.1 3.0 2.815.0 13.7 3.6 3.4 3.2 3.1 3.0 2.8
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8
-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.50.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.53.0 2.2 3.9 3.9 3.9 3.9 3.7 3.55.0 4.1 4.1 4.1 4.0 3.9 3.7 3.57.0 6.0 4.2 4.2 4.0 3.9 3.7 3.59.0 7.9 4.3 4.3 4.0 3.9 3.7 3.511.0 9.8 4.5 4.3 4.0 3.9 3.7 3.513.0 11.8 4.5 4.3 4.0 3.9 3.7 3.515.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5
40
-19.8 -20.0 3.0 2.9 2.9 2.9 2.9 2.9-18.8 -19.0 3.0 3.0 3.0 3.0 3.0 3.0-16.7 -17.0 3.2 3.2 3.2 3.2 3.2 3.2-14.7 -15.0 3.4 3.4 3.4 3.4 3.4 3.4-12.6 -13.0 3.6 3.6 3.6 3.5 3.5 3.5-10.5 -11.0 3.7 3.7 3.7 3.7 3.7 3.7-9.5 -10.0 3.8 3.8 3.8 3.8 3.8 3.8
-8.5 -9.1 3.9 3.9 3.9 3.9 3.9 3.9-7.0 -7.6 4.0 4.0 4.0 4.0 4.0 4.0-5.0 -5.6 4.2 4.2 4.2 4.2 4.2 4.2-3.0 -3.7 4.4 4.4 4.4 4.4 4.4 4.40.0 -0.7 4.7 4.6 4.6 4.6 4.6 4.43.0 2.2 4.9 4.9 4.9 4.8 4.7 4.45.0 4.1 5.1 5.1 5.0 4.8 4.7 4.47.0 6.0 5.2 5.2 5.0 4.8 4.7 4.49.0 7.9 5.4 5.3 5.0 4.8 4.7 4.411.0 9.8 5.6 5.3 5.0 4.8 4.7 4.413.0 11.8 5.6 5.3 5.0 4.8 4.7 4.415.0 13.7 5.6 5.3 5.0 4.8 4.7 4.4
63
-19.8 -20.0 4.7 4.7 4.7 4.7 4.7 4.7-18.8 -19.0 4.9 4.9 4.8 4.8 4.8 4.8-16.7 -17.0 5.1 5.1 5.1 5.1 5.1 5.1-14.7 -15.0 5.4 5.4 5.4 5.4 5.4 5.4-12.6 -13.0 5.7 5.7 5.7 5.7 5.7 5.7-10.5 -11.0 6.0 6.0 6.0 6.0 6.0 5.9-9.5 -10.0 6.1 6.1 6.1 6.1 6.1 6.1-8.5 -9.1 6.3 6.3 6.2 6.2 6.2 6.2-7.0 -7.6 6.5 6.5 6.4 6.4 6.4 6.4-5.0 -5.6 6.8 6.7 6.7 6.7 6.7 6.7
-3.0 -3.7 7.0 7.0 7.0 7.0 7.0 7.00.0 -0.7 7.5 7.4 7.4 7.4 7.4 7.03.0 2.2 7.9 7.8 7.8 7.7 7.5 7.05.0 4.1 8.1 8.1 8.0 7.7 7.5 7.07.0 6.0 8.4 8.4 8.0 7.7 7.5 7.09.0 7.9 8.7 8.5 8.0 7.7 7.5 7.011.0 9.8 8.9 8.5 8.0 7.7 7.5 7.013.0 11.8 9.0 8.5 8.0 7.7 7.5 7.015.0 13.7 9.0 8.5 8.0 7.7 7.5 7.0
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 79/308
EDMT34-635A Air Velocity and Temperature Distributions (Reference Data)
FXKQ-MA 73
5
8. Air Velocity and Temperature Distributions
(Reference Data)
FXKQ63MAVE
(Heating · Air velocity distribution)
Lower airflow
FXKQ63MAVE (Heating · Temperature distribution)
Lower airflow
Note:
The corner type is applicable on a high ceiling. The standard setup height is 3 m. Shown here is the measurement
distribution at the ceiling height of 3 m.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 80/308
Sound Levels EDMT34-635A
74 FXKQ-MA
9. Sound Levels
Overall
Octave Band Level
220V, 50/60Hz
240V, 50Hz
Location of microphone Notes:
1. The operating conditions are assumed to be standard
(JIS conditions).
2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipment installed.
dB(A)
Model220V, 50/60Hz 240V, 50Hz
H L H L
FXKQ25MAVEFXKQ32MAVE 38 33 40 35
FXKQ40MAVE 40 34 42 36
FXKQ63MAVE 42 37 44 39
FXKQ25MAVE / FXKQ32MAVE FXKQ40MAVE FXKQ63MAVE
4D037071 4D037072 4D037073
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 81/308
EDMT34-635A Centre of Gravity
FXKQ-MA 75
5
10.Centre of Gravity
FXKQ25MAVE / FXKQ32MAVE / FXKQ40MAVE / FXKQ63MAVE
C: 4D037079A
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 82/308
Accessories EDMT34-635A
76 FXKQ-MA
11.Accessories
11.1 Optional Accessories (for Unit)
C: 3D037081A
11.2 Optional Accessories (for Controls)
Refer to page 282.
ModelFXKQ25MAVEFXKQ32MAVEFXKQ40MAVE
FXKQ63MAVE
Panelrelated
Decoration panel BYK45FJW1 BYK71FJW1
Long life replacementfilter
KAFJ521F56 KAFJ521F80
Air inletand airdischargeoutletrelated
Air discharge grill K-HV7AW K-HV9AW
Air discharge blindpanel
KDBJ52F56W KDBJ52F80W
Panel spacer KPBJ52F56W KPBJ52F80W
Flexible duct(with shutter)
KFDJ52FA56 KFDJ52FA80
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 83/308
EDMT34-635A
FXDQ-PB / FXDQ-NB 77
6
FXDQ-PB / FXDQ-NB
Slim Ceiling Mounted Duct Type
1. Specifications........................................................................................781.1 FXDQ-PB ...............................................................................................78
1.2 FXDQ-NB ...............................................................................................79
2. Dimensions ...........................................................................................802.1 FXDQ-PB ...............................................................................................80
2.2 FXDQ-NB ...............................................................................................82
3. Piping Diagrams....................................................................................86
4. Wiring Diagrams....................................................................................87
5. Electric Characteristics..........................................................................89
6. Safety Devices Setting..........................................................................90
7. Capacity Tables ....................................................................................917.1 Cooling Capacity ....................................................................................91
7.2 Heating Capacity ....................................................................................93
8. Fan Performances.................................................................................958.1 FXDQ-PB ...............................................................................................95
8.2 FXDQ-NB ...............................................................................................96
9. Sound Levels ........................................................................................979.1 FXDQ-PB ...............................................................................................97
9.2 FXDQ-NB ...............................................................................................98
10.Centre of Gravity ...................................................................................9910.1 FXDQ-PB ...............................................................................................99
10.2 FXDQ-NB.............................................................................................100
11.Accessories.........................................................................................10111.1 Optional Accessories (for Unit).............................................................101
11.2 Optional Accessories (for Controls)......................................................101
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 84/308
Specifications EDMT34-635A
78 FXDQ-PB / FXDQ-NB
1. Specifications
1.1 FXDQ-PB
Slim ceiling mounted duct type (700 mm width type)
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5m, level difference: 0m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard static pressure”.
(Factory setting is 10 Pa.)
6 The operation sound levels are the conversion values in anechoic chamber. In practice, the sound tend to be larger than the specified values
due to ambient noise or reflections.
When the place of suction is changed to the bottom suction, the sound level will increase by approx. 5 dB(A).
7 FXDQ20 / 25 / 32PBVE only.
8 Refer to page 89 for Fan Motor Input.
Modelwith a drain pump FXDQ20PBVE FXDQ25PBVE FXDQ32PBVE
without a drain pump FXDQ20PBVET FXDQ25PBVET FXDQ32PBVET
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 2,000 2,500 3,200
Btu/h 7,800 9,900 12,600
kW 2.3 2.9 3.7
2 4 Cooling capacity (19°CWB) kW 2.2 2.8 3.6
3 4 Heating capacity
kcal/h 2,200 2,800 3,400
Btu/h 8,500 10,900 13,600
kW 2.5 3.2 4.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 200×700×620 200×700×620 200×700×620
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×12×1.5 2×12×1.5 3×12×1.5
Face area m² 0.126 0.126 0.126
Fan
Model — — —
Type Sirocco fan Sirocco fan Sirocco fanMotor output ×Number of units W 62×1 62×1 62×1
Airflow rate (HH/H/L)
m³/min 8.0/7.2/6.4 8.0/7.2/6.4 8.0/7.2/6.4
l/s 133/120/106 133/120/106 133/120/106
cfm 282/254/226 282/254/226 282/254/226
5 External static pressure Pa 30-10 30-10 30-10
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Sound absorbing thermal insulation material Foamed polyethylene Foamed polyethylene Foamed polyethylene
Air filter Removal / Washable / Mildew proof Removal / Washable / Mildew proof Removal / Washable / Mildew proof
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mm VP20
(External dia. 26 Internal dia. 20)
VP20
(External dia. 26 Internal dia. 20)
VP20
(External dia. 26 Internal dia. 20)Mass (Weight) kg 23 23 23
6 Sound level (HH/H/L) dB(A) 33/31/29 33/31/29 33/31/29
Sound power (HH) dB(A) 51 51 51
Safety devices Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual.Installation manual.Drain hose. Sealing pads. Clamps.Washers. Insulation for fitting.Clamp metal. Washer fixing plate.Screws for duct flanges. Air filter. (Product quality certificate 7)
Operation manual.Installation manual.Drain hose. Sealing pads. Clamps.Washers. Insulation for fitting.Clamp metal. Washer fixing plate.Screws for duct flanges. Air filter. (Product quality certificate 7)
Operation manual.Installation manual.Drain hose. Sealing pads. Clamps.Washers. Insulation for fitting.Clamp metal. Washer fixing plate.Screws for duct flanges. Air filter. (Product quality certificate 7)
Drawing No. C: 3D060921A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 85/308
EDMT34-635A Specifications
FXDQ-PB / FXDQ-NB 79
6
1.2 FXDQ-NB
Slim ceiling mounted duct type (900 / 1,100 mm width type)
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5m, level difference: 0m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 External static pressure is changeable to set by the remote controller. This pressure means “High static pressure - Standard static pressure”.(Factory setting is 15 Pa.)
6 The operation sound levels are the conversion values in anechoic chamber. In practice, the sound tend to be larger than the specified values
due to ambient noise or reflections.
When the place of suction is changed to the bottom suction, the sound level will increase by approx. 5 dB(A).
7 FXDQ40 / 50 / 63NBVE only.
8 Refer to page 89 for Fan Motor Input.
Modelwith a drain pump FXDQ40NBVE FXDQ50NBVE FXDQ63NBVE
without a drain pump FXDQ40NBVET FXDQ50NBVET FXDQ63NBVET
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
1 4 Cooling capacity (19.5°CWB)kcal/h 4,000 5,000 6,300Btu/h 16,000 19,800 24,900
kW 4.7 5.8 7.3
2 4 Cooling capacity (19°CWB) kW 4.5 5.6 7.1
3 4 Heating capacity
kcal/h 4,300 5,400 6,900
Btu/h 17,100 21,500 27,300
kW 5.0 6.3 8.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 200×900×620 200×900×620 200×1100×620
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×12×1.5 3×12×1.5 3×12×1.5
Face area m² 0.176 0.176 0.227
Fan
Model — — —
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 62×1 130×1 130×1
Airflow rate (HH/H/L)
m³/min 10.5/9.5/8.5 12.5/11.0/10.0 16.5/14.5/13.0
l/s 175/158/141 208/183/166 275/241/216
cfm 371/335/300 441/388/353 583/512/459
5 External static pressure Pa 44-15 44-15 44-15
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Sound absorbing thermal insulation material Foamed polyethylene Foamed polyethylene Foamed polyethylene
Air filter Removal / Washable / Mildew proof Removal / Washable / Mildew proof Removal / Washable / Mildew proof
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection)
Drain pipe mm VP20(External dia. 26 Internal dia. 20)
VP20(External dia. 26 Internal dia. 20)
VP20(External dia. 26 Internal dia. 20)
Mass (Weight) kg 27 28 31
6 Sound level (HH/H/L) dB(A) 34/32/30 35/33/31 36/34/32
Sound power (HH) dB(A) 52 53 54
Safety devices Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual.Installation manual.Drain hose. Sealing pads. Clamps.Washers. Insulation for fitting.Clamp metal. Washer fixing plate.Screws for duct flanges. Air filter. (Product quality certificate 7)
Operation manual.Installation manual.Drain hose. Sealing pads. Clamps.Washers. Insulation for fitting.Clamp metal. Washer fixing plate.Screws for duct flanges. Air filter. (Product quality certificate 7)
Operation manual.Installation manual.Drain hose. Sealing pads. Clamps.Washers. Insulation for fitting.Clamp metal. Washer fixing plate.Screws for duct flanges. Air filter. (Product quality certificate 7)
Drawing No. C: 3D060921A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 86/308
Dimensions EDMT34-635A
80 FXDQ-PB / FXDQ-NB
2. Dimensions
2.1 FXDQ-PB
FXDQ20PBVE / FXDQ25PBVE / FXDQ32PBVE (with a drain pump)Unit (mm)
3 D 0 4 9 7 9 9 C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 87/308
EDMT34-635A Dimensions
FXDQ-PB / FXDQ-NB 81
6
FXDQ20PBVET / FXDQ25PBVET / FXDQ32PBVET (without a drain pump)Unit (mm)
3 D
0 5 0 7 3 2 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 88/308
Dimensions EDMT34-635A
82 FXDQ-PB / FXDQ-NB
2.2 FXDQ-NB
FXDQ40NBVE / FXDQ50NBVE (with a drain pump)Unit (mm)
3 D 0 4 5 4 9 4 C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 89/308
EDMT34-635A Dimensions
FXDQ-PB / FXDQ-NB 83
6
FXDQ63NBVE (with a drain pump)Unit (mm)
3 D
0 4 5 4 9 6 D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 90/308
Dimensions EDMT34-635A
84 FXDQ-PB / FXDQ-NB
FXDQ40NBVET / FXDQ50NBVET (without a drain pump)Unit (mm)
3 D
0 4 9 7 0 1 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 91/308
EDMT34-635A Dimensions
FXDQ-PB / FXDQ-NB 85
6
FXDQ63NBVET (without a drain pump)Unit (mm)
3 D
0 4 9 7 0 2 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 92/308
Piping Diagrams EDMT34-635A
86 FXDQ-PB / FXDQ-NB
3. Piping Diagrams
Refrigerant pipe connection port diameters
(mm)
Model Gas Liquid
FXDQ20PBVE / FXDQ25PBVE / FXDQ32PBVE / FXDQ40NBVE / FXDQ50NBVEFXDQ20PBVET / FXDQ25PBVET / FXDQ32PBVET / FXDQ40NBVET / FXDQ50NBVET φ12.7 φ6.4
FXDQ63NBVEFXDQ63NBVET
φ15.9 φ9.5
4D060927B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 93/308
EDMT34-635A Wiring Diagrams
FXDQ-PB / FXDQ-NB 87
6
4. Wiring Diagrams
FXDQ20PBVE / FXDQ25PBVE / FXDQ32PBVE / FXDQ40NBVE / FXDQ50NBVE / FXDQ63NBVE
(with a drain pump)
3 D 0 6 0 5 4
7 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 94/308
Wiring Diagrams EDMT34-635A
88 FXDQ-PB / FXDQ-NB
FXDQ20PBVET / FXDQ25PBVET / FXDQ32PBVET / FXDQ40NBVET / FXDQ50NBVET / FXDQ63NBVET
(without a drain pump)
P 1
P 2
R 1 T
S S 1
N
N
R 1
T
X 1 6 A
A 1 P
X 3 1 A
L
B L U
G R N
/ Y L W
R E D
~ 2 2 0 - 2
4 0 V ~
2 2 0 V
X 1 3 A
P O W E R
S U P P L Y
L
X 1 1 A
R 2 T
X 2 M
R 3 T
X 1 2 A
t ˚
t ˚
t ˚
F 1 U
5 0 H z
6 0 H z
M Y 1 E
V 1 T R
T 1 R
X 1 A
t ˚
X 3 0 A
X 3 A
X 1 8 A
X 7 A
H A P
X 4 A
X 2 7 A
X 1 6 A
X 1 8 A
X 2 M
X 1 M
C 1
A 1 P
Z 1 C
T 1 R
Z 2 C
C O
N T R O L B O X
P N K
Z 2 C
N =
3
Z 1 C
N =
3
I N P U T F R O M
O U T S I D E
M 1 F
G R Y
Q 1 M
W H T
X 1 M
W I R E D R E M
O T E
C O N T R O L L E
R
T R A N S M I S S I O N
W I R I N G C E N
T R A L
R E M O T E C O N T R O L L E R
B L U
O R G
M ~
B L K
B L K W H T
N O T E ) 3
B L U
C 1 Y
L W
R E D
Y L W
F 2
T 2
F 1
P 1
P 2
T 1
P R P
N O T E ) 5
N O
T E S )
1 .
: T E R M I N A L
,
: C O N N E C T O R
2 .
: F I E L D W I R I N G
3 . I N C A S E U S I N G C E N T R A L R E M O T E C O N T R O L L E R
, C O N N E C T I T T O T H E U N I T I N A C C O R D
A N C E W I T H T H E A T T A C H E D I N S T A L L A T I O N
M A N U A L
.
4 . R
E M O T E C O N T R O L L E R M O D E L V A R I E S A C C O R D I N G T O T H E C O M B I N A T I O N S Y S T E M
, C O
N F I R M E N G I N E E R I N G M A T E R I A L S A N D C A T
A L O G S
, E T C
. B E F O R E C O N N E C T I N G
.
5 . W
H E N C O N N E C T I N G T H E I N P U T W I R E S F R O M O U T S I D E
, F O R C E D O F F O R O N / O F F C O N T
R O L O P E R A T I O N C A N B E S E L E C T E D B Y R E
M O T E C O N T R O L L E R
.
I N D E T A I L S
, R E F E R T O T H E I N S T A L L A T I O N M
A N U A L A T T A C H E D T H E U N I T
.
6 . S
Y M B O L S S H O W
A S F O L L O W S :
R E D :
R E D B
L K :
B L A C K
W H T :
W H I T E
Y L W
: Y E L L O W
P
R P :
P U R P L E
G R Y :
G R A Y
B L U :
B L U E
P N K
: P I N K
O R G :
O R A N G E
G R N :
G R E E N
S E L E C T O R S W I T C H ( M A I N / S U B )
T R A N S F O R M E R ( 2 2 0 V / 2 2 V )
C O N N E C T O R F O R O P T I O N A L P A R T S
L I G H T E M I T T I N G D I O D E
( S E R V I C E M O N I T O R G R E E N )
P H A S E C O N T R O L C I R C U I T
T H E R M I S T O R ( C O I L - 1
)
W I R E D R E M O T E C O N T R O L L E R
T E R M I N A L B L O C K
P R I N T E D C I R C U I T B O A R D
E L E C T R O N I C E X P A N S I O N V A L V E
C O N N E C T O R ( A D A P T O R F O R W I R I N G )
T H E R M A L P R O T E C T O R ( M 1 F E M B E D D E D )
T E R M I N A L B L O C K
N O I S E F I L T E R ( F E R R I T E C O R E )
M O T O R ( I N D O O R F A N )
C A P A C I T O R ( M 1 F )
T H E R M I S T O R ( A I R )
T H E R M I S T O R ( A I R )
T H E R M I S T O R ( C O I L - 2
)
C O N N E C T O R ( W I R I N G A D A P T O R
F O R E L E C T R I C A L A P P E N D I C E S )
F U S E ( F 5 A / 2 5 0 V )
A 1 P
C 1
F 1
U
H A P
M 1 F
Q 1 M
R 1 T
R 2 T
R 3 T
T 1
R
V 1 T R
X 1 M
X 2 M
Y 1 E
Z 1
C · Z 2 C
R 1 T
S S 1
X 1 6 A
X 1 8 A
C
: 3 D 0 6 0 5 4 8
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 95/308
EDMT34-635A Electric Characteristics
FXDQ-PB / FXDQ-NB 89
6
5. Electric Characteristics
C: 4D060922
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 96/308
Safety Devices Setting EDMT34-635A
90 FXDQ-PB / FXDQ-NB
6. Safety Devices Setting
C: 4D060926B
ModelFXDQ20PBVE
FXDQ20PBVETFXDQ25PBVE
FXDQ25PBVETFXDQ32PBVE
FXDQ32PBVETFXDQ40NBVE
FXDQ40NBVETFXDQ50NBVE
FXDQ50NBVETFXDQ63NBVE
FXDQ63NBVET
Printed circuit board fuse 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A
Fan motor thermal fuse °C – – – – – –
Fan motor thermal protector °C OFF: 130±5ON : 83±15
OFF: 130±5ON : 83±15
OFF: 130±5ON : 83±15
OFF: 130±5ON : 83±15
OFF: 130±5ON : 83±15
OFF: 130±5ON : 83±15
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 97/308
EDMT34-635A Capacity Tables
FXDQ-PB / FXDQ-NB 91
6
7. Capacity Tables
7.1 Cooling Capacity
FXDQ-PB [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0°CWB 16.0°CWB 18.0°CWB 19.0°CWB 20.0°CWB 22.0°CWB 24.0°CWB
20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
20
10.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.9 2.012.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.9 2.014.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.8 1.916.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.8 1.918.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.7 1.920.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.7 1.921.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.7 1.923.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.6 1.925.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.6 1.8 2.6 1.927.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.5 1.8 2.6 1.929.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.5 1.8 2.5 1.831.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.4 1.7 2.5 1.833.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.4 1.7 2.5 1.835.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.4 1.7 2.4 1.837.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.3 1.9 2.3 1.7 2.4 1.839.0 1.5 1.4 1.8 1.6 2.1 1.8 2.2 1.9 2.2 1.9 2.3 1.6 2.3 1.8
25
10.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.4 2.2 3.7 2.312.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.4 2.2 3.6 2.214.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.4 2.2 3.6 2.2
16.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.4 2.2 3.5 2.218.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.4 2.2 3.5 2.220.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.4 2.2 3.4 2.221.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.4 2.2 3.4 2.223.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.3 2.2 3.4 2.125.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.3 2.2 3.3 2.127.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.2 2.2 3.3 2.129.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.2 2.1 3.2 2.131.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.1 2.1 3.2 2.133.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.1 2.1 3.1 2.135.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 3.0 2.2 3.0 2.1 3.1 2.037.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 2.9 2.2 3.0 2.0 3.0 2.039.0 1.9 1.6 2.3 1.9 2.6 2.1 2.8 2.1 2.9 2.1 2.9 2.0 3.0 2.0
32
10.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.3 2.8 4.7 2.912.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.3 2.8 4.7 2.914.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.3 2.8 4.6 2.816.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.3 2.8 4.6 2.818.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.3 2.8 4.5 2.820.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.3 2.8 4.4 2.821.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.3 2.8 4.4 2.723.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.2 2.8 4.3 2.725.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.2 2.7 4.3 2.7
27.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.1 2.7 4.2 2.729.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.1 2.7 4.2 2.631.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 4.0 2.6 4.1 2.633.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 3.9 2.6 4.0 2.635.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.8 2.7 3.9 2.6 4.0 2.537.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.7 2.6 3.8 2.6 3.9 2.539.0 2.4 2.0 2.9 2.3 3.4 2.4 3.6 2.6 3.7 2.6 3.8 2.5 3.8 2.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 98/308
Capacity Tables EDMT34-635A
92 FXDQ-PB / FXDQ-NB
FXDQ-NB [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp.14.0°CWB 16.0°CWB 18.0°CWB 19.0°CWB 20.0°CWB 22.0°CWB 24.0°CWB20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB
°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
40
10.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.4 3.3 5.9 3.512.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.4 3.3 5.8 3.514.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.4 3.3 5.8 3.516.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.4 3.3 5.7 3.5
18.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.4 3.3 5.6 3.420.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.4 3.3 5.5 3.421.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.4 3.3 5.5 3.423.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.3 3.3 5.4 3.325.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.2 3.3 5.3 3.327.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.2 3.2 5.3 3.329.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.1 3.2 5.2 3.331.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 5.0 3.2 5.1 3.233.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.8 3.2 4.9 3.2 5.0 3.235.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.7 3.2 4.9 3.1 5.0 3.237.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.7 3.2 4.8 3.1 4.9 3.139.0 3.0 2.5 3.6 2.8 4.2 3.3 4.5 3.3 4.6 3.2 4.7 3.1 4.8 3.1
50
10.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.7 4.2 7.4 4.112.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.7 4.2 7.3 4.114.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.7 4.2 7.2 4.116.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.7 4.2 7.1 4.018.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.7 4.2 7.0 4.020.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.7 4.2 6.9 4.021.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.7 4.2 6.8 4.023.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.6 4.2 6.7 3.925.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.5 4.1 6.6 3.9
27.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.4 4.1 6.6 3.929.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.3 4.0 6.5 3.831.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.2 4.0 6.4 3.833.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 6.0 4.0 6.1 4.0 6.3 3.835.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 5.9 4.0 6.0 3.9 6.2 3.737.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 5.8 4.0 5.9 3.9 6.1 3.739.0 3.8 3.1 4.5 3.5 5.2 3.9 5.6 4.0 5.7 3.9 5.8 3.9 6.0 3.7
63
10.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.5 5.1 9.3 5.712.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.5 5.1 9.2 5.614.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.5 5.1 9.1 5.516.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.5 5.1 9.0 5.418.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.5 5.1 8.8 5.420.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.5 5.1 8.7 5.321.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.5 5.1 8.7 5.323.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.4 5.1 8.5 5.225.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.3 5.0 8.4 5.127.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.1 5.0 8.3 5.129.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 8.0 4.9 8.2 5.031.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 7.9 4.9 8.1 4.933.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.6 4.9 7.8 4.8 7.9 4.935.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.5 4.8 7.7 4.8 7.8 4.837.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.4 4.8 7.5 4.7 7.7 4.8
39.0 4.8 3.8 5.7 4.3 6.6 4.8 7.1 4.9 7.2 4.7 7.4 4.7 7.6 4.7
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 99/308
EDMT34-635A Capacity Tables
FXDQ-PB / FXDQ-NB 93
6
7.2 Heating Capacity
FXDQ-PB [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW
20
-19.8 -20.0 1.5 1.5 1.5 1.5 1.5 1.5-18.8 -19.0 1.5 1.5 1.5 1.5 1.5 1.5
-16.7 -17.0 1.6 1.6 1.6 1.6 1.6 1.6-14.7 -15.0 1.7 1.7 1.7 1.7 1.7 1.7-12.6 -13.0 1.8 1.8 1.8 1.8 1.8 1.8-10.5 -11.0 1.9 1.9 1.9 1.9 1.9 1.9-9.5 -10.0 1.9 1.9 1.9 1.9 1.9 1.9-8.5 -9.1 2.0 2.0 1.9 1.9 1.9 1.9-7.0 -7.6 2.0 2.0 2.0 2.0 2.0 2.0-5.0 -5.6 2.1 2.1 2.1 2.1 2.1 2.1-3.0 -3.7 2.2 2.2 2.2 2.2 2.2 2.20.0 -0.7 2.3 2.3 2.3 2.3 2.3 2.23.0 2.2 2.5 2.5 2.4 2.4 2.3 2.25.0 4.1 2.5 2.5 2.5 2.4 2.3 2.27.0 6.0 2.6 2.6 2.5 2.4 2.3 2.29.0 7.9 2.7 2.7 2.5 2.4 2.3 2.211.0 9.8 2.8 2.7 2.5 2.4 2.3 2.213.0 11.8 2.8 2.7 2.5 2.4 2.3 2.215.0 13.7 2.8 2.7 2.5 2.4 2.3 2.2
25
-19.8 -20.0 1.9 1.9 1.9 1.9 1.9 1.9-18.8 -19.0 1.9 1.9 1.9 1.9 1.9 1.9-16.7 -17.0 2.1 2.1 2.0 2.0 2.0 2.0-14.7 -15.0 2.2 2.2 2.2 2.2 2.2 2.1-12.6 -13.0 2.3 2.3 2.3 2.3 2.3 2.3
-10.5 -11.0 2.4 2.4 2.4 2.4 2.4 2.4-9.5 -10.0 2.5 2.4 2.4 2.4 2.4 2.4-8.5 -9.1 2.5 2.5 2.5 2.5 2.5 2.5-7.0 -7.6 2.6 2.6 2.6 2.6 2.6 2.6-5.0 -5.6 2.7 2.7 2.7 2.7 2.7 2.7-3.0 -3.7 2.8 2.8 2.8 2.8 2.8 2.80.0 -0.7 3.0 3.0 3.0 3.0 3.0 2.83.0 2.2 3.1 3.1 3.1 3.1 3.0 2.85.0 4.1 3.3 3.2 3.2 3.1 3.0 2.87.0 6.0 3.4 3.4 3.2 3.1 3.0 2.89.0 7.9 3.5 3.4 3.2 3.1 3.0 2.811.0 9.8 3.6 3.4 3.2 3.1 3.0 2.813.0 11.8 3.6 3.4 3.2 3.1 3.0 2.815.0 13.7 3.6 3.4 3.2 3.1 3.0 2.8
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0
-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.50.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.53.0 2.2 3.9 3.9 3.9 3.9 3.7 3.55.0 4.1 4.1 4.1 4.0 3.9 3.7 3.57.0 6.0 4.2 4.2 4.0 3.9 3.7 3.59.0 7.9 4.3 4.3 4.0 3.9 3.7 3.511.0 9.8 4.5 4.3 4.0 3.9 3.7 3.513.0 11.8 4.5 4.3 4.0 3.9 3.7 3.515.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 100/308
Capacity Tables EDMT34-635A
94 FXDQ-PB / FXDQ-NB
FXDQ-NB [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW
40
-19.8 -20.0 3.0 2.9 2.9 2.9 2.9 2.9-18.8 -19.0 3.0 3.0 3.0 3.0 3.0 3.0-16.7 -17.0 3.2 3.2 3.2 3.2 3.2 3.2-14.7 -15.0 3.4 3.4 3.4 3.4 3.4 3.4-12.6 -13.0 3.6 3.6 3.6 3.5 3.5 3.5
-10.5 -11.0 3.7 3.7 3.7 3.7 3.7 3.7-9.5 -10.0 3.8 3.8 3.8 3.8 3.8 3.8-8.5 -9.1 3.9 3.9 3.9 3.9 3.9 3.9-7.0 -7.6 4.0 4.0 4.0 4.0 4.0 4.0-5.0 -5.6 4.2 4.2 4.2 4.2 4.2 4.2-3.0 -3.7 4.4 4.4 4.4 4.4 4.4 4.40.0 -0.7 4.7 4.6 4.6 4.6 4.6 4.43.0 2.2 4.9 4.9 4.9 4.8 4.7 4.45.0 4.1 5.1 5.1 5.0 4.8 4.7 4.47.0 6.0 5.2 5.2 5.0 4.8 4.7 4.49.0 7.9 5.4 5.3 5.0 4.8 4.7 4.411.0 9.8 5.6 5.3 5.0 4.8 4.7 4.413.0 11.8 5.6 5.3 5.0 4.8 4.7 4.415.0 13.7 5.6 5.3 5.0 4.8 4.7 4.4
50
-19.8 -20.0 3.7 3.7 3.7 3.7 3.7 3.7-18.8 -19.0 3.8 3.8 3.8 3.8 3.8 3.8-16.7 -17.0 4.1 4.0 4.0 4.0 4.0 4.0-14.7 -15.0 4.3 4.3 4.3 4.2 4.2 4.2-12.6 -13.0 4.5 4.5 4.5 4.5 4.5 4.5-10.5 -11.0 4.7 4.7 4.7 4.7 4.7 4.7-9.5 -10.0 4.8 4.8 4.8 4.8 4.8 4.8
-8.5 -9.1 4.9 4.9 4.9 4.9 4.9 4.9-7.0 -7.6 5.1 5.1 5.1 5.1 5.1 5.1-5.0 -5.6 5.3 5.3 5.3 5.3 5.3 5.3-3.0 -3.7 5.5 5.5 5.5 5.5 5.5 5.50.0 -0.7 5.9 5.9 5.8 5.8 5.8 5.53.0 2.2 6.2 6.2 6.2 6.1 5.9 5.55.0 4.1 6.4 6.4 6.3 6.1 5.9 5.57.0 6.0 6.6 6.6 6.3 6.1 5.9 5.59.0 7.9 6.8 6.7 6.3 6.1 5.9 5.511.0 9.8 7.0 6.7 6.3 6.1 5.9 5.513.0 11.8 7.1 6.7 6.3 6.1 5.9 5.515.0 13.7 7.1 6.7 6.3 6.1 5.9 5.5
63
-19.8 -20.0 4.7 4.7 4.7 4.7 4.7 4.7-18.8 -19.0 4.9 4.9 4.8 4.8 4.8 4.8-16.7 -17.0 5.1 5.1 5.1 5.1 5.1 5.1-14.7 -15.0 5.4 5.4 5.4 5.4 5.4 5.4-12.6 -13.0 5.7 5.7 5.7 5.7 5.7 5.7-10.5 -11.0 6.0 6.0 6.0 6.0 6.0 5.9-9.5 -10.0 6.1 6.1 6.1 6.1 6.1 6.1-8.5 -9.1 6.3 6.3 6.2 6.2 6.2 6.2-7.0 -7.6 6.5 6.5 6.4 6.4 6.4 6.4-5.0 -5.6 6.8 6.7 6.7 6.7 6.7 6.7
-3.0 -3.7 7.0 7.0 7.0 7.0 7.0 7.00.0 -0.7 7.5 7.4 7.4 7.4 7.4 7.03.0 2.2 7.9 7.8 7.8 7.7 7.5 7.05.0 4.1 8.1 8.1 8.0 7.7 7.5 7.07.0 6.0 8.4 8.4 8.0 7.7 7.5 7.09.0 7.9 8.7 8.5 8.0 7.7 7.5 7.011.0 9.8 8.9 8.5 8.0 7.7 7.5 7.013.0 11.8 9.0 8.5 8.0 7.7 7.5 7.015.0 13.7 9.0 8.5 8.0 7.7 7.5 7.0
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 101/308
EDMT34-635A Fan Performances
FXDQ-PB / FXDQ-NB 95
6
8. Fan Performances
8.1 FXDQ-PB
Notes:
1. The remote controller can be used to switch between “HH”, “H” and “L”.
2. The airflow is set to “standard” before leaving the factory.
It is possible to switch between “standard ESP” and “high ESP” by the remote controller.
FXDQ20PBVE / FXDQ25PBVE
FXDQ20PBVET / FXDQ25PBVET
FXDQ32PBVE
FXDQ32PBVET
3D052156D 3D052157D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 102/308
Fan Performances EDMT34-635A
96 FXDQ-PB / FXDQ-NB
8.2 FXDQ-NB
Notes:
1. The remote controller can be used to switch between “HH”, “H” and “L”.
2. The airflow is set to “standard” before leaving the factory.
It is possible to switch between “standard ESP” and “high ESP” by the remote controller.
FXDQ40NBVE
FXDQ40NBVET
FXDQ50NBVE
FXDQ50NBVET
FXDQ63NBVE
FXDQ63NBVET
3D046299F
3D046300F
3D046301F
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 103/308
EDMT34-635A Sound Levels
FXDQ-PB / FXDQ-NB 97
6
9. Sound Levels
9.1 FXDQ-PB
Overall
Octave Band Level
220-240/220V, 50/60Hz
Location of microphone Notes:1. The operating conditions are assumed to be standard
(JIS conditions)
2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipment installed.
dB(A)
Model220-240/220V, 50/60Hz
HH H L
FXDQ20PBVEFXDQ20PBVET
33 31 29
FXDQ25PBVEFXDQ25PBVET
33 31 29
FXDQ32PBVEFXDQ32PBVET
33 31 29
FXDQ20PBVE
FXDQ20PBVET
FXDQ25PBVE
FXDQ25PBVET
FXDQ32PBVE
FXDQ32PBVET
4D060945B 4D060946B 4D060947B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 104/308
Sound Levels EDMT34-635A
98 FXDQ-PB / FXDQ-NB
9.2 FXDQ-NB
Overall
Octave Band Level
220-240/220V, 50/60Hz
Location of microphone Notes:
1. The operating conditions are assumed to be standard
(JIS conditions).
2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipment installed.
dB(A)
Model220-240/220V, 50/60Hz
HH H L
FXDQ40NBVEFXDQ40NBVET
34 32 30
FXDQ50NBVEFXDQ50NBVET
35 33 31
FXDQ63NBVEFXDQ63NBVET
36 34 32
FXDQ40NBVE
FXDQ40NBVET
FXDQ50NBVE
FXDQ50NBVET
FXDQ63NBVE
FXDQ63NBVET
4D060948B 4D060949B 4D060950B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 105/308
EDMT34-635A Centre of Gravity
FXDQ-PB / FXDQ-NB 99
6
10.Centre of Gravity
10.1 FXDQ-PB
FXDQ20PBVE / FXDQ25PBVE / FXDQ32PBVE
FXDQ20PBVET / FXDQ25PBVET / FXDQ32PBVET
4D049300L
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 106/308
Centre of Gravity EDMT34-635A
100 FXDQ-PB / FXDQ-NB
10.2 FXDQ-NB
FXDQ40NBVE / FXDQ50NBVE
FXDQ40NBVET / FXDQ50NBVET
FXDQ63NBVE
FXDQ63NBVET
4D043886Q
Unit (mm)
4D043887P
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 107/308
EDMT34-635A Accessories
FXDQ-PB / FXDQ-NB 101
6
11.Accessories
11.1 Optional Accessories (for Unit)
C: 4D060939C
11.2 Optional Accessories (for Controls)
Refer to page 282.
ModelFXDQ20PBVEFXDQ25PBVEFXDQ32PBVE
FXDQ20PBVETFXDQ25PBVETFXDQ32PBVET
FXDQ40NBVEFXDQ50NBVE
FXDQ40NBVETFXDQ50NBVET
FXDQ63NBVE FXDQ63NBVET
Insulation kit for high humidity KDT25N32 KDT25N50 KDT25N63
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 108/308
Accessories EDMT34-635A
102 FXDQ-PB / FXDQ-NB
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 109/308
EDMT34-635A
FXMQ-P 103
7
FXMQ-P
Ceiling Mounted Duct Type
1. Specifications......................................................................................104
2. Dimensions .........................................................................................107
3. Piping Diagrams..................................................................................112
4. Wiring Diagrams..................................................................................113
5. Electric Characteristics........................................................................114
6. Safety Devices Setting........................................................................115
7. Capacity Tables ..................................................................................1167.1 Cooling Capacity ..................................................................................116
7.2 Heating Capacity ..................................................................................117
8. Fan Performances...............................................................................118
9. Airflow Auto Adjustment Characteristics .............................................123
10.Sound Levels ......................................................................................127
11.Centre of Gravity .................................................................................129
12.Accessories.........................................................................................13012.1 Optional Accessories (for Unit).............................................................130
12.2 Optional Accessories (for Controls)......................................................130
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 110/308
Specifications EDMT34-635A
104 FXMQ-P
1. Specifications
Ceiling mounted duct type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 External static pressure is changeable in 7 (FXMQ20PVE / FXMQ25PVE / FXMQ32PVE), 13 (FXMQ40PVE), 14 (FXMQ50PVE /
FXMQ63PVE / FXMQ80PVE / FXMQ100PVE / FXMQ125PVE) ,10 (FXMQ140PVE) stages within the ( ) range by remote controller.6 Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity
method) 50% or more.
7 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
8 Refer to page 114 for Fan Motor Input.
Model FXMQ20PVE FXMQ25PVE FXMQ32PVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 2,000 2,500 3,200
Btu/h 7,800 9,900 12,600
kW 2.3 2.9 3.7
2 4 Cooling capacity (19°CWB) kW 2.2 2.8 3.6
3 4 Heating capacity
kcal/h 2,200 2,800 3,400
Btu/h 8,500 10,900 13,600
kW 2.5 3.2 4.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 300×550×700 300×550×700 300×550×700
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×16×1.75 3×16×1.75 3×16×1.75
Face area m² 0.098 0.098 0.098
Fan
Model — — —
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 90×1 90×1 90×1
Airflow rate (HH/H/L)m³/min 9/7.5/6.5 9/7.5/6.5 9.5/8/7
l/s 150/125/108 150/125/108 158/133/116
cfm 318/265/230 318/265/230 335/282/247
External staticpressure Pa Standard 50 (100-30 5) Standard 50 (100-30 5) Standard 50 (100-30 5)
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Air filter 6 6 6
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mmVP25
External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
Mass (Weight) kg 25 25 25
7 Sound level (HH/H/L) dB(A) 33/31/29 33/31/29 34/32/30
Sound power (H) dB(A) 51 51 52
Safety devices Fuse.Fan driver overload protector.
Fuse.Fan driver overload protector.
Fuse.Fan driver overload protector.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installation manual.Drain hose. Sealing pads. Clamps.Washers. Screws. Insulation for fitting.Clamp metal. Air discharge flange. Airsuction flange.
Operation manual. Installation manual.Drain hose. Sealing pads. Clamps.Washers. Screws. Insulation for fitting.Clamp metal. Air discharge flange. Airsuction flange.
Operation manual. Installation manual.Drain hose. Sealing pads. Clamps.Washers. Screws. Insulation for fitting.Clamp metal. Air discharge flange. Airsuction flange.
Drawing No. C: 3D060388E
( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 111/308
EDMT34-635A Specifications
FXMQ-P 105
7
Ceiling mounted duct type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 External static pressure is changeable in 7 (FXMQ20PVE / FXMQ25PVE / FXMQ32PVE), 13 (FXMQ40PVE), 14 (FXMQ50PVE /
FXMQ63PVE / FXMQ80PVE / FXMQ100PVE / FXMQ125PVE) ,10 (FXMQ140PVE) stages within the ( ) range by remote controller.
6 Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity
method) 50% or more.
7 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
8 Refer to page 114 for Fan Motor Input.
Model FXMQ40PVE FXMQ50PVE FXMQ63PVE FXMQ80PVE
Power supply 1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 phase, 220-240/220V,50/60Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 4,000 5,000 6,300 8,000
Btu/h 16,000 19,800 24,900 31,700
kW 4.7 5.8 7.3 9.3
2 4 Cooling capacity (19°CWB) kW 4.5 5.6 7.1 9.0
3 4 Heating capacity
kcal/h 4,300 5,400 6,900 8,600
Btu/h 17,100 21,500 27,300 34,100
kW 5.0 6.3 8.0 10.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 300×700×700 300×1,000×700 300×1,000×700 300×1,000×700
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×16×1.75 3×16×1.75 3×16×1.75 3×16×1.75
Face area m² 0.148 0.249 0.249 0.249
Fan
Model — — — —
Type Sirocco fan Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 140×1 350×1 350×1 350×1
Airflow rate (HH/H/L)
m³/min 16/13/11 18/16.5/15 19.5/17.5/16 25/22.5/20
l/s 267/216/183 300/275/250 325/292/267 417/375/333
cfm 565/459/388 635/582/530 688/618/565 883/794/706
External staticpressure Pa Standard 100 (160-30 5) Standard 100 (200-50 5) Standard 100 (200-50 5) Standard 100 (200-50 5)
Drive Direct drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Microprocessor thermostatfor cooling and heating
Air filter 6 6 6 6
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection)
Drain pipe mmVP25
External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
Mass (Weight) kg 28 36 36 36
7 Sound level (HH/H/L) dB(A) 39/37/35 41/39/37 42/40/38 43/41/39
Sound power (H) dB(A) 57 59 60 61
Safety devicesFuse.
Fan driver overloadprotector.
Fuse.Fan driver overload
protector.
Fuse.Fan driver overload
protector.
Fuse.Fan driver overload
protector.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual.Installation manual. Drainhose. Sealing pads.Clamps. Washers. Screws.Insulation for fitting. Clampmetal. Air discharge flange.Air suction flange.
Operation manual.Installation manual. Drainhose. Sealing pads.Clamps. Washers. Screws.Insulation for fitting. Clampmetal. Air discharge flange.Air suction flange.
Operation manual.Installation manual. Drainhose. Sealing pads.Clamps. Washers. Screws.Insulation for fitting. Clampmetal. Air discharge flange.Air suction flange.
Operation manual.Installation manual. Drainhose. Sealing pads.Clamps. Washers. Screws.Insulation for fitting. Clampmetal. Air discharge flange.Air suction flange.
Drawing No. C: 3D060388E
( ) ( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 112/308
Specifications EDMT34-635A
106 FXMQ-P
Ceiling mounted duct type
Note:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 External static pressure is changeable in 7 (FXMQ20PVE / FXMQ25PVE / FXMQ32PVE), 13 (FXMQ40PVE), 14 (FXMQ50PVE /
FXMQ63PVE / FXMQ80PVE / FXMQ100PVE / FXMQ125PVE) ,10 (FXMQ140PVE) stages within the ( ) range by remote controller.
6 Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency (gravity
method) 50% or more.
7 Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values arenormally somewhat higher as a result of ambient conditions.
8 Refer to page 114 for Fan Motor Input.
Model FXMQ100PVE FXMQ125PVE FXMQ140PVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 10,000 12,500 14,300
Btu/h 39,600 49,500 57,000
kW 11.6 14.5 16.7
2 4 Cooling capacity (19°CWB) kW 11.2 14.0 16.0
3 4 Heating capacity
kcal/h 10,800 13,800 15,500
Btu/h 42,700 54,600 61,400
kW 12.5 16.0 18.0
Casing / Colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 300×1,400×700 300×1,400×700 300×1,400×700
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×16×1.75 3×16×1.75 3×16×1.5
Face area m² 0.383 0.383 0.383
Fan
Model — — —
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 350×1 350×1 350×1
Airflow rate (HH/H/L)
m³/min 32/27/23 39/33/28 46/39/32
l/s 533/450/383 650/550/466 767/650/533
cfm 1,130/953/812 1,377/1,165/988 1,624/1,377/1,130
External staticpressure Pa Standard 100 (200-50 5) Standard 100 (200-50 5) Standard 100 (140-50 5)
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat for coolingand heating
Microprocessor thermostat for coolingand heating
Microprocessor thermostat for coolingand heating
Air filter 6 6 6
Pipingconnections
Liquid pipes mm φ9.5 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ15.9 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection)
Drain pipe mmVP25
External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
VP25External dia. 32Internal dia. 25
Mass (Weight) kg 46 46 47
7 Sound level (HH/H/L) dB(A) 43/41/39 44/42/40 46/45/43
Sound power (H) dB(A) 61 62 64
Safety devices Fuse.Fan driver overload protector.
Fuse.Fan driver overload protector.
Fuse.Fan driver overload protector.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installation manual.Drain hose. Sealing pads. Clamps.Washers. Screws. Insulation for fitting.Clamp metal. Air discharge flange. Airsuction flange.
Operation manual. Installation manual.Drain hose. Sealing pads. Clamps.Washers. Screws. Insulation for fitting.Clamp metal. Air discharge flange. Airsuction flange.
Operation manual. Installation manual.Drain hose. Sealing pads. Clamps.Washers. Screws. Insulation for fitting.Clamp metal. Air discharge flange. Airsuction flange.
Drawing No. C: 3D060388E
( ) ( ) ( )
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 113/308
EDMT34-635A Dimensions
FXMQ-P 107
7
2. Dimensions
FXMQ20PVE / FXMQ25PVE / FXMQ32PVEUnit (mm)
3 D 0 6
2 5 4 1 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 114/308
Dimensions EDMT34-635A
108 FXMQ-P
FXMQ40PVEUnit (mm)
3 D 0 6 0 1 6 0 G
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 115/308
EDMT34-635A Dimensions
FXMQ-P 109
7
FXMQ50PVEUnit (mm)
3 D 0 6 0 1 5 9 F
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 116/308
Dimensions EDMT34-635A
110 FXMQ-P
FXMQ63PVE / FXMQ80PVEUnit (mm)
3 D 0 6 0 1 6 1 G
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 117/308
EDMT34-635A Dimensions
FXMQ-P 111
7
FXMQ100PVE / FXMQ125PVE / FXMQ140PVEUnit (mm)
3 D 0 6 0 1 6 2 G
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 118/308
Piping Diagrams EDMT34-635A
112 FXMQ-P
3. Piping Diagrams
Refrigerant pipe connection port diameters
(mm)
Model Gas Liquid
FXMQ20PVE / FXMQ25PVE / FXMQ32PVE / FXMQ40PVE / FXMQ50PVE φ12.7 φ6.4
FXMQ63PVE / FXMQ80PVE / FXMQ100PVE / FXMQ125PVE / FXMQ140PVE φ15.9 φ9.5
4D034245G
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 119/308
EDMT34-635A Wiring Diagrams
FXMQ-P 113
7
4. Wiring Diagrams
FXMQ20PVE / FXMQ25PVE / FXMQ32PVE / FXMQ40PVE / FXMQ50PVE / FXMQ63PVE / FXMQ80PVE /
FXMQ100PVE / FXMQ125PVE / FXMQ140PVE
C :
3 D 0 5 8 7
8 3 F
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 120/308
Electric Characteristics EDMT34-635A
114 FXMQ-P
5. Electric Characteristics
C: 4D060439C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 121/308
EDMT34-635A Safety Devices Setting
FXMQ-P 115
7
6. Safety Devices Setting
C: 3D034597J
Model FXMQ20PVE FXMQ25PVE FXMQ32PVE FXMQ40PVE FXMQ50PVE FXMQ63PVE FXMQ80PVE FXMQ100PVE FXMQ125PVE FXMQ140PVE
Printed circuit board fuse 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A
Printed circuit board fuse(Fan driver)
250V 5A 250V 5A 250V 5A 250V 5A 250V 6.3A 250V 6.3A 250V 6.3A 250V 6.3A 250V 6.3A 250V 6.3A
Drain pump thermal fuse °C 145 145 145 145 145 145 145 145 145 145
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 122/308
Capacity Tables EDMT34-635A
116 FXMQ-P
7. Capacity Tables
7.1 Cooling Capacity
FXMQ-P [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unit
size
Outdoor
air temp.
Indoor air temp.Unit
size
Outdoor
air temp.
Indoor air temp.14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB 14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB
20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB 20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC °CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
20
10.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.8 2.1
63
10.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 8.5 5.8 9.0 6.412.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.7 2.0 12.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 8.5 5.8 8.9 6.314.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.7 2.0 14.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 8.5 5.8 8.7 6.316.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.7 2.0 16.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 8.5 5.8 8.6 6.318.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.6 2.0 18.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 8.3 5.8 8.5 6.220.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.5 1.9 2.6 2.0 20.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 8.2 5.7 8.4 6.221.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.5 1.9 2.6 2.0 21.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 8.2 5.7 8.3 6.223.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.5 1.9 2.5 1.9 23.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 8.1 5.6 8.2 6.125.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.5 1.9 2.5 1.9 25.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 7.9 5.6 8.1 6.127.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.4 1.9 2.5 1.9 27.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.6 5.6 7.8 5.5 8.0 6.129.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.4 1.8 2.4 1.9 29.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.5 5.6 7.7 5.4 7.9 6.031.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.4 1.8 2.4 1.8 31.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.4 5.5 7.6 5.4 7.8 6.033.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.3 1.8 2.4 1.8 33.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.3 5.5 7.5 5.3 7.6 5.935.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.2 1.9 2.3 1.8 2.3 1.8 35.0 4.8 4.2 5.7 4.9 6.6 5.4 7.1 5.5 7.2 5.4 7.4 5.3 7.5 5.937.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.2 1.8 2.2 1.7 2.3 1.8 37.0 4.8 4.2 5.7 4.9 6.6 5.4 7.0 5.5 7.1 5.4 7.2 5.2 7.4 5.939.0 1.5 1.5 1.8 1.8 2.1 1.9 2.1 1.9 2.2 1.8 2.2 1.7 2.3 1.8 39.0 4.8 4.2 5.7 4.9 6.6 5.4 6.9 5.4 7.0 5.3 7.1 5.1 7.3 5.842.0 1.5 1.5 1.8 1.8 2.0 1.9 2.1 1.8 2.1 1.8 2.2 1.7 2.2 1.7 42.0 4.8 4.2 5.7 4.9 6.6 5.4 6.7 5.3 6.8 5.2 7.0 5.0 7.1 5.744.0 1.5 1.5 1.8 1.8 2.0 1.9 2.0 1.8 2.1 1.7 2.1 1.7 2.2 1.7 44.0 4.8 4.2 5.7 4.9 6.5 5.4 6.6 5.2 6.7 5.1 6.8 5.0 7.0 5.746.0 1.5 1.5 1.8 1.8 1.9 1.8 1.9 1.7 1.9 1.6 1.9 1.5 1.9 1.5 46.0 4.8 4.2 5.7 4.9 6.1 5.1 6.1 5.0 6.1 4.8 6.1 4.6 6.2 5.3
25
10.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.3 2.4 3.5 2.4
80
10.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.8 7.4 11.4 7.412.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.3 2.4 3.5 2.4 12.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.8 7.4 11.2 7.4
14.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.3 2.4 3.4 2.4 14.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.8 7.4 11.1 7.316.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.3 2.4 3.4 2.4 16.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.7 7.4 10.9 7.218.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.3 2.4 3.4 2.4 18.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.6 7.3 10.8 7.220.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.2 2.3 3.3 2.3 20.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.4 7.2 10.6 7.121.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.2 2.3 3.3 2.3 21.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.4 7.2 10.6 7.123.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.2 2.3 3.2 2.3 23.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.2 7.1 10.4 7.025.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.1 2.3 3.2 2.3 25.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 10.1 7.0 10.3 6.927.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.1 2.2 3.2 2.3 27.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.6 7.1 9.9 7.0 10.1 6.929.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 3.0 2.3 3.0 2.2 3.1 2.2 29.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.5 7.1 9.8 6.9 10.0 6.831.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 2.9 2.3 3.0 2.2 3.1 2.2 31.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.4 7.0 9.6 6.8 9.8 6.733.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 2.9 2.3 2.9 2.2 3.0 2.2 33.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.3 7.0 9.5 6.7 9.7 6.735.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 2.8 2.2 2.9 2.1 3.0 2.2 35.0 6.1 5.3 7.2 6.1 8.4 6.9 9.0 7.0 9.1 6.9 9.3 6.6 9.5 6.637.0 1.9 1.8 2.3 2.0 2.6 2.3 2.8 2.3 2.8 2.2 2.9 2.1 2.9 2.1 37.0 6.1 5.3 7.2 6.1 8.4 6.9 8.9 6.9 9.0 6.8 9.2 6.6 9.4 6.539.0 1.9 1.8 2.3 2.0 2.6 2.3 2.7 2.2 2.7 2.2 2.8 2.1 2.9 2.1 39.0 6.1 5.3 7.2 6.1 8.4 6.9 8.7 6.8 8.8 6.7 9.0 6.5 9.3 6.542.0 1.9 1.8 2.3 2.0 2.6 2.3 2.6 2.2 2.7 2.1 2.7 2.1 2.8 2.1 42.0 6.1 5.3 7.2 6.1 8.4 6.8 8.5 6.7 8.6 6.6 8.8 6.4 9.0 6.444.0 1.9 1.8 2.3 2.0 2.6 2.2 2.6 2.2 2.6 2.1 2.7 2.0 2.8 2.0 44.0 6.1 5.3 7.2 6.1 8.2 6.8 8.3 6.6 8.5 6.5 8.7 6.3 8.9 6.346.0 1.9 1.8 2.3 2.0 2.4 2.1 2.4 2.1 2.4 2.0 2.4 1.9 2.4 1.9 46.0 6.1 5.3 7.2 6.1 7.7 6.5 7.7 6.3 7.8 6.1 7.8 5.8 7.8 5.7
32
10.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.6 3.0
100
10.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 13.4 9.0 14.2 8.912.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.5 3.0 12.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 13.4 9.0 14.0 8.914.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.4 3.0 14.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 13.4 9.0 13.8 8.816.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.4 3.0 16.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 13.3 9.0 13.6 8.718.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.2 3.0 4.3 2.9 18.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 13.2 8.9 13.4 8.620.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.2 2.9 4.3 2.9 20.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 13.0 8.8 13.2 8.521.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.1 2.9 4.2 2.9 21.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 12.9 8.8 13.2 8.523.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.1 2.9 4.2 2.9 23.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 12.7 8.7 13.0 8.425.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.0 2.9 4.1 2.8 25.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 12.5 8.6 12.8 8.327.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 4.0 2.8 4.1 2.8 27.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.7 12.3 8.5 12.6 8.229.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 3.9 2.8 4.0 2.8 29.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.9 8.6 12.2 8.4 12.4 8.131.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.8 2.9 3.8 2.8 3.9 2.7 31.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.7 8.5 12.0 8.3 12.2 8.033.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.7 2.8 3.8 2.7 3.9 2.7 33.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.5 8.5 11.8 8.2 12.1 7.935.0 2.4 2.2 2.9 2.5 3.4 2.8 3.6 2.9 3.6 2.8 3.7 2.7 3.8 2.7 35.0 7.6 6.4 9.0 7.3 10.5 8.3 11.2 8.5 11.3 8.4 11.6 8.1 11.9 7.837.0 2.4 2.2 2.9 2.5 3.4 2.8 3.5 2.8 3.6 2.8 3.7 2.7 3.8 2.7 37.0 7.6 6.4 9.0 7.3 10.5 8.3 11.0 8.4 11.2 8.3 11.4 8.0 11.7 7.739.0 2.4 2.2 2.9 2.5 3.4 2.8 3.5 2.8 3.5 2.7 3.6 2.6 3.7 2.6 39.0 7.6 6.4 9.0 7.3 10.5 8.3 10.8 8.3 11.0 8.2 11.2 7.9 11.5 7.642.0 2.4 2.2 2.9 2.5 3.4 2.8 3.4 2.7 3.4 2.7 3.5 2.6 3.6 2.6 42.0 7.6 6.4 9.0 7.3 10.4 8.2 10.6 8.1 10.7 8.1 11.0 7.8 11.2 7.544.0 2.4 2.2 2.9 2.5 3.3 2.8 3.3 2.7 3.4 2.6 3.5 2.6 3.6 2.6 44.0 7.6 6.4 9.0 7.3 10.2 8.1 10.4 8.1 10.5 8.0 10.8 7.7 11.1 7.446.0 2.4 2.2 2.9 2.5 3.1 2.7 3.1 2.6 3.1 2.5 3.1 2.3 3.1 2.3 46.0 7.6 6.4 9.0 7.3 9.6 7.8 9.6 7.7 9.7 7.5 9.7 7.1 9.7 6.6
40
10.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.4 3.9 5.7 4.0
125
10.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 16.7 11.1 17.7 11.112.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.4 3.9 5.6 4.0 12.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 16.7 11.1 17.5 11.014.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.4 3.9 5.5 4.0 14.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 16.7 11.1 17.2 10.916.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.4 3.9 5.5 3.9 16.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 16.7 11.1 17.0 10.818.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.3 3.9 5.4 3.9 18.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 16.4 11.0 16.8 10.720.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.2 3.8 5.3 3.9 20.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 16.2 10.9 16.6 10.621.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.2 3.8 5.3 3.8 21.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 16.1 10.9 16.4 10.523.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.1 3.8 5.2 3.8 23.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 15.9 10.8 16.2 10.425.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.0 3.7 5.1 3.8 25.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 15.6 10.6 16.0 10.327.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 5.0 3.7 5.1 3.7 27.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.8 15.4 10.5 15.8 10.229.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.8 3.8 4.9 3.7 5.0 3.7 29.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.9 10.7 15.2 10.4 15.5 10.1
31.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.7 3.8 4.8 3.6 4.9 3.6 31.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.6 10.6 15.0 10.3 15.3 10.033.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.6 3.7 4.7 3.6 4.8 3.6 33.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.4 10.5 14.7 10.2 15.1 9.835.0 3.0 2.9 3.6 3.4 4.2 3.8 4.5 3.8 4.6 3.7 4.7 3.5 4.8 3.6 35.0 9.4 8.0 11.3 9.2 13.1 10.3 14.0 10.5 14.2 10.4 14.5 10.1 14.9 9.737.0 3.0 2.9 3.6 3.4 4.2 3.8 4.4 3.8 4.5 3.6 4.6 3.5 4.7 3.5 37.0 9.4 8.0 11.3 9.2 13.1 10.3 13.8 10.4 13.9 10.3 14.3 10.0 14.6 9.639.0 3.0 2.9 3.6 3.4 4.2 3.8 4.4 3.7 4.4 3.6 4.5 3.4 4.6 3.5 39.0 9.4 8.0 11.3 9.2 13.1 10.3 13.5 10.3 13.7 10.2 14.1 9.9 14.4 9.542.0 3.0 2.9 3.6 3.4 4.2 3.8 4.2 3.6 4.3 3.5 4.4 3.4 4.5 3.4 42.0 9.4 8.0 11.3 9.2 13.0 10.3 13.2 10.2 13.4 10.0 13.7 9.8 14.1 9.344.0 3.0 2.9 3.6 3.4 4.1 3.7 4.2 3.6 4.2 3.5 4.3 3.3 4.4 3.4 44.0 9.4 8.0 11.3 9.2 12.8 10.2 13.0 10.1 13.1 9.9 13.5 9.7 13.8 9.246.0 3.0 2.9 3.6 3.4 3.9 3.6 3.9 3.4 3.9 3.3 3.9 3.0 3.9 3.1 46.0 9.4 8.0 11.3 9.2 12.0 9.8 12.1 9.6 12.1 9.4 12.1 9.0 12.2 8.3
50
10.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.7 4.8 7.1 4.3
140
10.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 19.1 12.7 20.2 12.612.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.7 4.8 7.0 4.3 12.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 19.1 12.7 20.0 12.514.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.7 4.8 6.9 4.2 14.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 19.1 12.7 19.7 12.416.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.7 4.8 6.8 4.1 16.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 19.1 12.7 19.4 12.318.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.6 4.7 6.7 4.1 18.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 18.8 12.6 19.2 12.220.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.5 4.7 6.6 4.0 20.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 18.5 12.4 18.9 12.121.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.4 4.6 6.6 4.0 21.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 18.4 12.4 18.8 12.123.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.4 4.6 6.5 4.0 23.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 18.1 12.3 18.5 12.025.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.3 4.5 6.4 3.9 25.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 17.9 12.1 18.3 11.927.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 6.0 4.6 6.2 4.5 6.3 3.8 27.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 17.6 12.0 18.0 11.829.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 5.9 4.6 6.1 4.4 6.2 3.8 29.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 17.0 12.3 17.4 11.9 17.8 11.731.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 5.9 4.6 6.0 4.4 6.1 3.7 31.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 16.7 12.1 17.1 11.8 17.5 11.633.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 5.8 4.5 5.9 4.3 6.0 3.7 33.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 16.5 12.0 16.8 11.7 17.2 11.535.0 3.8 3.6 4.5 4.1 5.2 4.5 5.6 4.6 5.7 4.5 5.8 4.3 5.9 3.6 35.0 10.8 9.0 12.9 10.4 15.0 11.7 16.0 12.0 16.2 11.9 16.6 11.5 17.0 11.337.0 3.8 3.6 4.5 4.1 5.2 4.5 5.5 4.6 5.6 4.4 5.7 4.2 5.8 3.6 37.0 10.8 9.0 12.9 10.4 15.0 11.7 15.7 11.9 15.9 11.7 16.3 11.4 16.7 11.2
39.0 3.8 3.6 4.5 4.1 5.2 4.5 5.4 4.5 5.5 4.4 5.6 4.2 5.8 3.5 39.0 10.8 9.0 12.9 10.4 15.0 11.7 15.5 11.8 15.7 11.6 16.1 11.3 16.5 11.142.0 3.8 3.6 4.5 4.1 5.2 4.5 5.3 4.4 5.3 4.3 5.5 4.1 5.6 3.4 42.0 10.8 9.0 12.9 10.4 14.9 11.7 15.1 11.6 15.3 11.4 15.7 11.1 16.1 11.044.0 3.8 3.6 4.5 4.1 5.1 4.5 5.2 4.4 5.3 4.2 5.4 4.1 5.5 3.4 44.0 10.8 9.0 12.9 10.4 14.6 11.5 14.8 11.4 15.0 11.3 15.4 11.0 15.8 10.946.0 3.8 3.6 4.5 4.1 4.8 4.3 4.8 4.1 4.8 4.0 4.8 3.7 4.9 2.9 46.0 10.8 9.0 12.9 10.4 13.7 11.1 13.8 10.9 13.8 10.6 13.8 10.2 13.9 10.0
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 123/308
EDMT34-635A Capacity Tables
FXMQ-P 117
7
7.2 Heating Capacity
FXMQ-P [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDBUnitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0 16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW °CDB °CWB kW kW kW kW kW kW
20
-19.8 -20.0 1.5 1.5 1.5 1.5 1.5 1.5
63
-19.8 -20.0 4.7 4.7 4.7 4.7 4.7 4.7-18.8 -19.0 1.5 1.5 1.5 1.5 1.5 1.5 -18.8 -19.0 4.9 4.9 4.8 4.8 4.8 4.8
-16.7 -17.0 1.6 1.6 1.6 1.6 1.6 1.6 -16.7 -17.0 5.1 5.1 5.1 5.1 5.1 5.1-14.7 -15.0 1.7 1.7 1.7 1.7 1.7 1.7 -14.7 -15.0 5.4 5.4 5.4 5.4 5.4 5.4-12.6 -13.0 1.8 1.8 1.8 1.8 1.8 1.8 -12.6 -13.0 5.7 5.7 5.7 5.7 5.7 5.7-10.5 -11.0 1.9 1.9 1.9 1.9 1.9 1.9 -10.5 -11.0 6.0 6.0 6.0 6.0 6.0 5.9-9.5 -10.0 1.9 1.9 1.9 1.9 1.9 1.9 -9.5 -10.0 6.1 6.1 6.1 6.1 6.1 6.1-8.5 -9.1 2.0 2.0 1.9 1.9 1.9 1.9 -8.5 -9.1 6.3 6.3 6.2 6.2 6.2 6.2-7.0 -7.6 2.0 2.0 2.0 2.0 2.0 2.0 -7.0 -7.6 6.5 6.5 6.4 6.4 6.4 6.4-5.0 -5.6 2.1 2.1 2.1 2.1 2.1 2.1 -5.0 -5.6 6.8 6.7 6.7 6.7 6.7 6.7-3.0 -3.7 2.2 2.2 2.2 2.2 2.2 2.2 -3.0 -3.7 7.0 7.0 7.0 7.0 7.0 7.00.0 -0.7 2.3 2.3 2.3 2.3 2.3 2.2 0.0 -0.7 7.5 7.4 7.4 7.4 7.4 7.03.0 2.2 2.5 2.5 2.4 2.4 2.3 2.2 3.0 2.2 7.9 7.8 7.8 7.7 7.5 7.05.0 4.1 2.5 2.5 2.5 2.4 2.3 2.2 5.0 4.1 8.1 8.1 8.0 7.7 7.5 7.07.0 6.0 2.6 2.6 2.5 2.4 2.3 2.2 7.0 6.0 8.4 8.4 8.0 7.7 7.5 7.09.0 7.9 2.7 2.7 2.5 2.4 2.3 2.2 9.0 7.9 8.7 8.5 8.0 7.7 7.5 7.011.0 9.8 2.8 2.7 2.5 2.4 2.3 2.2 11.0 9.8 8.9 8.5 8.0 7.7 7.5 7.013.0 11.8 2.8 2.7 2.5 2.4 2.3 2.2 13.0 11.8 9.0 8.5 8.0 7.7 7.5 7.015.0 13.7 2.8 2.7 2.5 2.4 2.3 2.2 15.0 13.7 9.0 8.5 8.0 7.7 7.5 7.0
25
-19.8 -20.0 1.9 1.9 1.9 1.9 1.9 1.9
80
-19.8 -20.0 5.9 5.9 5.9 5.9 5.9 5.8-18.8 -19.0 1.9 1.9 1.9 1.9 1.9 1.9 -18.8 -19.0 6.1 6.1 6.0 6.0 6.0 6.0-16.7 -17.0 2.1 2.1 2.0 2.0 2.0 2.0 -16.7 -17.0 6.4 6.4 6.4 6.4 6.4 6.4-14.7 -15.0 2.2 2.2 2.2 2.2 2.2 2.1 -14.7 -15.0 6.8 6.8 6.8 6.7 6.7 6.7-12.6 -13.0 2.3 2.3 2.3 2.3 2.3 2.3 -12.6 -13.0 7.1 7.1 7.1 7.1 7.1 7.1
-10.5 -11.0 2.4 2.4 2.4 2.4 2.4 2.4 -10.5 -11.0 7.5 7.5 7.5 7.5 7.4 7.4-9.5 -10.0 2.5 2.4 2.4 2.4 2.4 2.4 -9.5 -10.0 7.7 7.7 7.6 7.6 7.6 7.6-8.5 -9.1 2.5 2.5 2.5 2.5 2.5 2.5 -8.5 -9.1 7.8 7.8 7.8 7.8 7.8 7.8-7.0 -7.6 2.6 2.6 2.6 2.6 2.6 2.6 -7.0 -7.6 8.1 8.1 8.1 8.1 8.0 8.0-5.0 -5.6 2.7 2.7 2.7 2.7 2.7 2.7 -5.0 -5.6 8.4 8.4 8.4 8.4 8.4 8.4-3.0 -3.7 2.8 2.8 2.8 2.8 2.8 2.8 -3.0 -3.7 8.8 8.8 8.7 8.7 8.7 8.70.0 -0.7 3.0 3.0 3.0 3.0 3.0 2.8 0.0 -0.7 9.3 9.3 9.3 9.3 9.3 8.73.0 2.2 3.1 3.1 3.1 3.1 3.0 2.8 3.0 2.2 9.8 9.8 9.8 9.7 9.4 8.75.0 4.1 3.3 3.2 3.2 3.1 3.0 2.8 5.0 4.1 10.2 10.1 10.0 9.7 9.4 8.77.0 6.0 3.4 3.4 3.2 3.1 3.0 2.8 7.0 6.0 10.5 10.5 10.0 9.7 9.4 8.79.0 7.9 3.5 3.4 3.2 3.1 3.0 2.8 9.0 7.9 10.8 10.6 10.0 9.7 9.4 8.711.0 9.8 3.6 3.4 3.2 3.1 3.0 2.8 11.0 9.8 11.2 10.6 10.0 9.7 9.4 8.713.0 11.8 3.6 3.4 3.2 3.1 3.0 2.8 13.0 11.8 11.3 10.6 10.0 9.7 9.4 8.715.0 13.7 3.6 3.4 3.2 3.1 3.0 2.8 15.0 13.7 11.3 10.6 10.0 9.7 9.4 8.7
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3
100
-19.8 -20.0 7.4 7.4 7.3 7.3 7.3 7.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4 -18.8 -19.0 7.6 7.6 7.6 7.5 7.5 7.5-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5 -16.7 -17.0 8.0 8.0 8.0 8.0 8.0 8.0-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7 -14.7 -15.0 8.5 8.5 8.4 8.4 8.4 8.4-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8 -12.6 -13.0 8.9 8.9 8.9 8.9 8.9 8.8-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0 -10.5 -11.0 9.4 9.3 9.3 9.3 9.3 9.3-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0 -9.5 -10.0 9.6 9.6 9.5 9.5 9.5 9.5
-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1 -8.5 -9.1 9.8 9.8 9.7 9.7 9.7 9.7-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2 -7.0 -7.6 10.1 10.1 10.1 10.1 10.1 10.0-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4 -5.0 -5.6 10.6 10.5 10.5 10.5 10.5 10.5-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.5 -3.0 -3.7 11.0 11.0 10.9 10.9 10.9 10.90.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.5 0.0 -0.7 11.6 11.6 11.6 11.6 11.6 10.93.0 2.2 3.9 3.9 3.9 3.9 3.7 3.5 3.0 2.2 12.3 12.3 12.2 12.1 11.7 10.95.0 4.1 4.1 4.1 4.0 3.9 3.7 3.5 5.0 4.1 12.7 12.7 12.5 12.1 11.7 10.97.0 6.0 4.2 4.2 4.0 3.9 3.7 3.5 7.0 6.0 13.1 13.1 12.5 12.1 11.7 10.99.0 7.9 4.3 4.3 4.0 3.9 3.7 3.5 9.0 7.9 13.5 13.3 12.5 12.1 11.7 10.911.0 9.8 4.5 4.3 4.0 3.9 3.7 3.5 11.0 9.8 14.0 13.3 12.5 12.1 11.7 10.913.0 11.8 4.5 4.3 4.0 3.9 3.7 3.5 13.0 11.8 14.1 13.3 12.5 12.1 11.7 10.915.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5 15.0 13.7 14.1 13.3 12.5 12.1 11.7 10.9
40
-19.8 -20.0 3.0 2.9 2.9 2.9 2.9 2.9
125
-19.8 -20.0 9.4 9.4 9.4 9.4 9.4 9.3-18.8 -19.0 3.0 3.0 3.0 3.0 3.0 3.0 -18.8 -19.0 9.7 9.7 9.7 9.7 9.6 9.6-16.7 -17.0 3.2 3.2 3.2 3.2 3.2 3.2 -16.7 -17.0 10.3 10.3 10.2 10.2 10.2 10.2-14.7 -15.0 3.4 3.4 3.4 3.4 3.4 3.4 -14.7 -15.0 10.9 10.8 10.8 10.8 10.8 10.7-12.6 -13.0 3.6 3.6 3.6 3.5 3.5 3.5 -12.6 -13.0 11.4 11.4 11.4 11.4 11.3 11.3-10.5 -11.0 3.7 3.7 3.7 3.7 3.7 3.7 -10.5 -11.0 12.0 12.0 11.9 11.9 11.9 11.9-9.5 -10.0 3.8 3.8 3.8 3.8 3.8 3.8 -9.5 -10.0 12.3 12.2 12.2 12.2 12.2 12.2-8.5 -9.1 3.9 3.9 3.9 3.9 3.9 3.9 -8.5 -9.1 12.5 12.5 12.5 12.5 12.4 12.4-7.0 -7.6 4.0 4.0 4.0 4.0 4.0 4.0 -7.0 -7.6 13.0 12.9 12.9 12.9 12.9 12.8-5.0 -5.6 4.2 4.2 4.2 4.2 4.2 4.2 -5.0 -5.6 13.5 13.5 13.5 13.4 13.4 13.4
-3.0 -3.7 4.4 4.4 4.4 4.4 4.4 4.4 -3.0 -3.7 14.1 14.0 14.0 14.0 14.0 13.90.0 -0.7 4.7 4.6 4.6 4.6 4.6 4.4 0.0 -0.7 14.9 14.9 14.8 14.8 14.8 13.93.0 2.2 4.9 4.9 4.9 4.8 4.7 4.4 3.0 2.2 15.7 15.7 15.7 15.5 15.0 13.95.0 4.1 5.1 5.1 5.0 4.8 4.7 4.4 5.0 4.1 16.3 16.2 16.0 15.5 15.0 13.97.0 6.0 5.2 5.2 5.0 4.8 4.7 4.4 7.0 6.0 16.8 16.8 16.0 15.5 15.0 13.99.0 7.9 5.4 5.3 5.0 4.8 4.7 4.4 9.0 7.9 17.3 17.0 16.0 15.5 15.0 13.911.0 9.8 5.6 5.3 5.0 4.8 4.7 4.4 11.0 9.8 17.9 17.0 16.0 15.5 15.0 13.913.0 11.8 5.6 5.3 5.0 4.8 4.7 4.4 13.0 11.8 18.1 17.0 16.0 15.5 15.0 13.915.0 13.7 5.6 5.3 5.0 4.8 4.7 4.4 15.0 13.7 18.1 17.0 16.0 15.5 15.0 13.9
50
-19.8 -20.0 3.7 3.7 3.7 3.7 3.7 3.7
140
19.8 20.0 10.6 10.6 10.6 10.6 10.5 10.5-18.8 -19.0 3.8 3.8 3.8 3.8 3.8 3.8 18.8 19.0 10.9 10.9 10.9 10.9 10.9 10.8-16.7 -17.0 4.1 4.0 4.0 4.0 4.0 4.0 -16.7 -17.0 11.6 11.6 11.5 11.5 11.5 11.5-14.7 -15.0 4.3 4.3 4.3 4.2 4.2 4.2 -13.7 -15.0 12.2 12.2 12.2 12.1 12.1 12.1-12.6 -13.0 4.5 4.5 4.5 4.5 4.5 4.5 -11.8 -13.0 12.9 12.8 12.8 12.8 12.8 12.7-10.5 -11.0 4.7 4.7 4.7 4.7 4.7 4.7 -9.8 -11.0 13.5 13.5 13.4 13.4 13.4 13.4-9.5 -10.0 4.8 4.8 4.8 4.8 4.8 4.8 -9.5 -10.0 13.8 13.8 13.7 13.7 13.7 13.7-8.5 -9.1 4.9 4.9 4.9 4.9 4.9 4.9 -8.5 -9.1 14.1 14.1 14.0 14.0 14.0 14.0-7.0 -7.6 5.1 5.1 5.1 5.1 5.1 5.1 -7.0 -7.6 14.6 14.5 14.5 14.5 14.5 14.4-5.0 -5.6 5.3 5.3 5.3 5.3 5.3 5.3 -5.0 -5.6 15.2 15.2 15.1 15.1 15.1 15.1-3.0 -3.7 5.5 5.5 5.5 5.5 5.5 5.5 -3.0 -3.7 15.8 15.8 15.7 15.7 15.7 15.70.0 -0.7 5.9 5.9 5.8 5.8 5.8 5.5 0.0 -0.7 16.8 16.7 16.7 16.7 16.7 15.7
3.0 2.2 6.2 6.2 6.2 6.1 5.9 5.5 3.0 2.2 17.7 17.7 17.6 17.4 16.8 15.75.0 4.1 6.4 6.4 6.3 6.1 5.9 5.5 5.0 4.1 18.3 18.3 18.0 17.4 16.8 15.77.0 6.0 6.6 6.6 6.3 6.1 5.9 5.5 7.0 6.0 18.9 18.9 18.0 17.4 16.8 15.79.0 7.9 6.8 6.7 6.3 6.1 5.9 5.5 9.0 7.9 19.5 19.2 18.0 17.4 16.8 15.711.0 9.8 7.0 6.7 6.3 6.1 5.9 5.5 11.0 9.8 20.1 19.2 18.0 17.4 16.8 15.713.0 11.8 7.1 6.7 6.3 6.1 5.9 5.5 13.0 11.8 20.3 19.2 18.0 17.4 16.8 15.715.0 13.7 7.1 6.7 6.3 6.1 5.9 5.5 15.0 13.7 20.3 19.2 18.0 17.4 16.8 15.7
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 124/308
Fan Performances EDMT34-635A
118 FXMQ-P
8. Fan Performances
FXMQ20PVE / FXMQ25PVE
FXMQ32PVE
3D062537A
3D062538A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 125/308
EDMT34-635A Fan Performances
FXMQ-P 119
7
FXMQ40PVE
FXMQ50PVE
3D060456C
3D060457D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 126/308
Fan Performances EDMT34-635A
120 FXMQ-P
FXMQ63PVE
FXMQ80PVE
3D060458C
3D060459C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 127/308
EDMT34-635A Fan Performances
FXMQ-P 121
7
FXMQ100PVE
FXMQ125PVE
3D060460C
3D060461C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 128/308
Fan Performances EDMT34-635A
122 FXMQ-P
FXMQ140PVE
3D063787
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 129/308
EDMT34-635A Airflow Auto Adjustment Characteristics
FXMQ-P 123
7
9. Airflow Auto Adjustment Characteristics
FXMQ20PVE / FXMQ25PVE
FXMQ32PVE
3D062539A
3D062540A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 130/308
Airflow Auto Adjustment Characteristics EDMT34-635A
124 FXMQ-P
FXMQ40PVE
FXMQ50PVE
3D060577D
3D060578D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 131/308
EDMT34-635A Airflow Auto Adjustment Characteristics
FXMQ-P 125
7
FXMQ63PVE
FXMQ80PVE
3D060579D
3D060580D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 132/308
Airflow Auto Adjustment Characteristics EDMT34-635A
126 FXMQ-P
FXMQ100PVE
FXMQ125PVE
3D060581D
3D060582D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 133/308
EDMT34-635A Sound Levels
FXMQ-P 127
7
10.Sound Levels
Overall
Octave Band Level
220-240/220V, 50/60Hz
Location of microphone Notes:
1. The operating conditions are assumed to be standard
(JIS conditions).2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipment installed.
dB(A)
Model220-240/220V, 50/60Hz
HH H L
FXMQ20PVE / FXMQ25PVE 33 31 29
FXMQ32PVE 34 32 30
FXMQ40PVE 39 37 35
FXMQ50PVE 41 39 37
FXMQ63PVE 42 40 38
FXMQ80PVE 43 41 39
FXMQ100PVE 43 41 39
FXMQ125PVE 44 42 40
FXMQ140PVE 46 45 43
FXMQ20PVE / FXMQ25PVE FXMQ32PVE FXMQ40PVE
FXMQ50PVE FXMQ63PVE FXMQ80PVE
4D062535 4D062536 4D060446B
4D060428B 4D060447B 4D060429B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 134/308
Sound Levels EDMT34-635A
128 FXMQ-P
FXMQ100PVE FXMQ125PVE FXMQ140PVE
4D060448B 4D060449B 4D063786
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 135/308
EDMT34-635A Centre of Gravity
FXMQ-P 129
7
11.Centre of Gravity
FXMQ20PVE / FXMQ25PVE / FXMQ32PVE / FXMQ40PVE / FXMQ50PVE / FXMQ63PVE / FXMQ80PVE /
FXMQ100PVE / FXMQ125PVE / FXMQ140PVEUnit (mm)
C: 4D060438C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 136/308
Accessories EDMT34-635A
130 FXMQ-P
12.Accessories
12.1 Optional Accessories (for Unit)
C: 3D060443D
12.2 Optional Accessories (for Controls)
Refer to page 282.
Model FXMQ20PVE FXMQ25PVE FXMQ32PVE FXMQ40PVE FXMQ50PVE FXMQ63PVE FXMQ80PVE FXMQ100PVE FXMQ125PVE FXMQ140PVE
High efficiency filter65% KAF372AA36 KAF372AA56 KAF372AA80 KAF372AA160
90% KAF373AA36 KAF373AA56 KAF373AA80 KAF373AA160
Filter chamber KDDF37AA36 KDDF37AA56 KDDF37AA80 KDDF37AA160Long life replacement filter KAF371AA36 KAF371AA56 KAF371AA80 KAF371AA160
Long life filter chamber kit KAF375AA36 KAF375AA56 KAF375AA80 KAF375AA160
Service panel
KTBJ25K36W KTB25KA56W KTB25KA80W KTB25KA160W
KTBJ25K36F KTBJ25K56F KTBJ25K80F KTBJ25K160F
KTBJ25K36T KTBJ25K56T KTBJ25K80T KTBJ25K160T
Air discharge adapter KDAJ25K36A KDAJ25K56A KDAJ25K71A KDAJ25K140A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 137/308
EDMT34-635A
FXHQ-MA 131
8
FXHQ-MA
Ceiling Suspended Type
1. Specifications......................................................................................132
2. Dimensions .........................................................................................133
3. Piping Diagrams..................................................................................136
4. Wiring Diagrams..................................................................................137
5. Electric Characteristics........................................................................138
6. Safety Devices Setting........................................................................139
7. Capacity Tables ..................................................................................1407.1 Cooling Capacity ..................................................................................140
7.2 Heating Capacity ..................................................................................141
8. Air Velocity and Temperature Distributions (Reference Data) ............142
9. Sound Levels ......................................................................................143
10.Accessories.........................................................................................14410.1 Optional Accessories (for Unit).............................................................144
10.2 Optional Accessories (for Controls)......................................................144
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 138/308
Specifications EDMT34-635A
132 FXHQ-MA
1. Specifications
Ceiling suspended type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values
are normally somewhat higher as a result of ambient conditions.
6 Refer to page 138 for Fan Motor Input.
Model FXHQ32MAVE FXHQ63MAVE FXHQ100MAVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
14 Cooling capacity (19.5°CWB)
kcal/h 3,200 6,300 10,000
Btu/h 12,600 24,900 39,600
kW 3.7 7.3 11.6
24 Cooling capacity (19°CWB) kW 3.6 7.1 11.2
34 Heating capacity
kcal/h 3,400 6,900 10,800
Btu/h 13,600 27,300 42,700
kW 4.0 8.0 12.5
Casing colour White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Dimensions: (H×W×D) mm 195×960×680 195×1,160×680 195×1,400×680
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×12×1.75 3×12×1.75 3×12×1.75
Face area m² 0.182 0.233 0.293
Fan
Model 3D12K1AA1 4D12K1AA1 3D12K2AA1
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 62×1 62×1 130×1
Airflow rate (H/L)m³/min 12/10 17.5/14 25/19.5
l/s 200/166 291/233 416/325
cfm 424/353 618/494 883/688
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat for coolingand heating
Microprocessor thermostat for coolingand heating
Microprocessor thermostat for coolingand heating
Sound absorbing thermal insulation material Glass wool Glass wool Glass wool
Air filter Resin net (with mold resistant) Resin net (with mold resistant) Resin net (with mold resistant)
PipingConnections
Liquid pipes mm φ6.4 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection)
Drain pipe mm VP20(External dia. 26 Internal dia. 20)
VP20(External dia. 26 Internal dia. 20)
VP20(External dia. 26 Internal dia. 20)
Mass (Weight) kg 24 28 33
5 Sound level (H/L) dB(A) 36/31 39/34 45/37
Safety devices Fuse.Thermal protector for fan motor.
Fuse.Thermal protector for fan motor.
Fuse.Thermal protector for fan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installationmanual. Drain hose. Paper pattern forinstallation. Clamp metal. Insulationfor fitting. Clamps. Washers.
Operation manual. Installationmanual. Drain hose. Paper pattern forinstallation. Clamp metal. Insulationfor fitting. Clamps. Washers.
Operation manual. Installationmanual. Drain hose. Paper pattern forinstallation. Clamp metal. Insulationfor fitting. Clamps. Washers.
Drawing No. C: 3D038815A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 139/308
EDMT34-635A Dimensions
FXHQ-MA 133
8
2. Dimensions
FXHQ32MAVEUnit (mm)
3 D 0 3 8 8 5 5 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 140/308
Dimensions EDMT34-635A
134 FXHQ-MA
FXHQ63MAVEUnit (mm)
3 D 0 3 8 8 5 6 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 141/308
EDMT34-635A Dimensions
FXHQ-MA 135
8
FXHQ100MAVEUnit (mm)
3 D 0 3 8 8 5 7 C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 142/308
Piping Diagrams EDMT34-635A
136 FXHQ-MA
3. Piping Diagrams
Refrigerant pipe connection port diameters
4D034245G
(mm)
Model Gas LiquidFXHQ32MAVE φ12.7 φ6.4
FXHQ63MAVE / FXHQ100MAVE φ15.9 φ9.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 143/308
EDMT34-635A Wiring Diagrams
FXHQ-MA 137
8
4. Wiring Diagrams
FXHQ32MAVE / FXHQ63MAVE / FXHQ100MAVE
N
F 1
( D E F R O S T - O
R A N G E )
A 1 P
L I G H T E M I T T I N G D I O D E
X 6 A
C O N N E C T O R F O R
O P T I O N A L P A R T S
E L E C T R I C
A L A P P E N D I C E S )
L
X 2 A
X 2 7 A
X 8 A
R E M O T E C O N T R O L L E R
X 2 M
A 2 P
S S 1
R E D
T
H E R M I S T O R ( A I R )
E L E C T R I C P A R T S B O X
W H
T
R 2 T
X 1 M
I N P U T F R O M
X 2 3 A
K A R
L
I M I T S W I T C H ( S W I N G F L A P )
N O T E - 3
C 1 R
B L K
P O W E R S U P P L Y
F 2
S S 1
X 2 3 A
X 1 A
X 1 8 A
T 2
M
O T O R ( I N D O O R F A N )
W H T
R E D
N O T E - 6 B
L U
C
A P A C I T O R ( M 1 F )
X 7 A
M
O T O R ( D R A I N P U M P )
M
Q 1 M
R 3 T
N O T E - 5
A 1 P
T
E R M I N A L B L O C K ( P O W E R )
X 1 A
X 2 3 A
T
E R M I N A L B L O C K ( C O N T R O L )
L
I G H T E M I T T I N G D I O D E
P
H A S E C O N T R O L C I R C U I T
X 8 A
T R A N S M I S S
I O N
X 1 2 A
S S 2
Y L W
P 2
M S W
X 1 1 A
W I R I N G C E N
T R A L
P 2
S S 2
( O P T I O N A L A C C E S S O R Y )
H 4 P
B L K
Y 1 E
W H T
W H T
I N D O O R U N I T
T
H E R M I S T O R ( C O I L G A S )
S E L E C T O R S W I T C H ( M A I N / S U B )
A 3 P
( T I M E R - G
R E E N )
L
I G H T E M I T T I N G D I O D E
X 3 0 A
A 1 P
R 1 T
X 2 M
O R G
N O T E - 4
F 1 U
M
X 9 A
X 3 A
N
F 2
H 3 P
P 2
M
X 1 A
C O N N E C T O R ( W
I R I N G A D A P T O R F O R
P
R I N T E D C I R C U I T B O A R D
F 1
P N K
T
H E R M I S T O R ( C O I L L I Q U I D )
P 1
C O N N E C T O R
( F L O A T S W I T C H )
E
L E C T R O N I C E X P A N S I O N V A L V E
W I R E D
R E M O T E C O N T R O L L E R
M
A G N E T I C R E L A Y ( M 1 P )
C O N N E C T O R ( W I R E L E S S
T 1
T
H E R M O S W I T C H ( M 1 F E M B E D D E D )
L I G H T E M I T T I N G D I O D E
T 2
P C
L
I G H T E M I T T I N G D I O D E ( O N - R E D )
B S 1
( W I R E L E S S A D D R E S S S E T )
O U T S I D E X
1 M
2 2 0 - 2
4 0 V
~ 5 0 H z
S S 1
C 1 R
P
R I N T E D C I R C U I T B O A R D
X 1 3 A
P 1
t ˚
P 1
X 2 5 A
X 4 A
T O W I R
E L E S S R E M O T E C O N T R O L L E R )
M
A G N E T I C R E L A Y ( M 1 S )
H 4 P
T 1 R
S
E L E C T O R S W I T C H ( M A I N / S U B )
X 1 8 A
T 1 R
H 2 P
R 1 T
( W I R E L E S S R E M O T E C O N T R O L L E R )
R E C E I V E R / D I S P L A Y U N I T
W I R E D R E M O T E C O N T R
O L L E R
T
H E R M I S T O R ( A I R )
K P R
H A P
S 1 Q
R E C E I V
E R / D I S P L A Y U N I T ( A T T A C H E D
L
P
U S H B U T T O N ( O N / O F F )
T
R A N S F O R M E R ( 2 2 0 - 2 4 0 V / 2 2 V )
R E M O T
E C O N T R O L L E R )
S E L E C T O R S W I T C H
H 1 P
B L K
R E D
Y L W
M
O T O R ( S W I N G F L A P )
P
R I N T E D C I R C U I T B O A R D
( S E R V I C E M O N I T O R - G R E E N )
W H T
( F I L T E R S I G N - R
E D )
F
U S E ( B
, 5 A
, 2 5 0 V )
M 1 S
H 3 P
M 1 F
T 1
M 1 P
X 2 3 A
X 1 8 A
)
(
X 8 A
1 .
: T E R M
I N A L B L O C K
,
: C O N N E C T O R
: S H O R T
C I R C U I T C O N N E C T O R
2 .
: F I E L D W I R I N G
3 .
I N C A S E U S I N
G C E N T R A L R E M O T E C O N T R O L L E R
,
C O N N E C T I T T O T H E U N I T I N A C C O R D A N C E W I T H
T H E A T T A C H E
D I N S T R U C T I O N M A N U A L
.
4 .
X 2 3 A I S C O N N
E C T E D W H E N T H E W I R E L E S S R E M O T E
C O N T R O L L E R
K I T I S B E I N G U S E D
.
5 . W
H E N C O N N E C T I N G T H E I N P U T W I R E S F R O M O U T S I D E ,
F O R C E D O F F
O R O N / O F F C O N T R O L O P E R A T I O N C A N B E
S E L E C T E D B Y
R E M O T E C O N T R O L L E R
. I N D E T A I L S
, R E F E R
T O T H E I N S T A
L L A T I O N M A N U A L A T T A C H E D T H E U N I T
.
6 .
I N C A S E I N S T
A L L I N G T H E D R A I N P U M P
, R E M O V E T H E
S H O R T C I R C U
I T C O N N E C T O R O F X 8 A A N D E X E C U T E T H E
A D D I T I O N A L W
I R I N G F O R F L O A T S W I T C H A N D D R A I N P U M
P .
7 .
S Y M B O L S S H
O W
A S F O L L O W S
.
P N K :
P I N K W
H T : W
H I T E Y L W
: Y E L L O W
O R G :
O R A N G E
B L U :
B L U E B
L K :
B L A C K
R E D :
R E D
8 .
U S E C O P P E R
C O N D U C T O R S O N L Y
.
N O T E S )
t ˚
t ˚
t ˚
A 1 P
C 1 R
F 1 U
H A P
K A R
K P R
M 1 F
M 1 S
Q 1 M
R 1 T
R 2 T
R 3 T
S 1 Q
T 1 R
X 1 M
X 2 M
Y 1 E
P C
M 1 P
R 1 T
S S 1
A 2 P
A 3 P
B S 1
H 1 P
H 2 P
2 2 0 V
~ 6 0 H z
~
~
~
O P T I O N A L P A R T S
C :
3 D 0 3 9 8 0 1 D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 144/308
Electric Characteristics EDMT34-635A
138 FXHQ-MA
5. Electric Characteristics
C: 4D035304C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 145/308
EDMT34-635A Safety Devices Setting
FXHQ-MA 139
8
6. Safety Devices Setting
C: 3D034597J
Model FXHQ32MAVE FXHQ63MAVE FXHQ100MAVE
Printed circuit board fuse 250V 5A 250V 5A 250V 5A
Fan motor thermal fuse °C – – –
Fan motor thermal protector °COFF: 130±5ON : 80±20
OFF: 130±5ON : 80±20
OFF: 130±5ON : 80±20
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 146/308
Capacity Tables EDMT34-635A
140 FXHQ-MA
7. Capacity Tables
7.1 Cooling Capacity
FXHQ-MA [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0°CWB 16.0°CWB 18.0°CWB 19.0°CWB 20.0°CWB 22.0°CWB 24.0°CWB
20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
32
10.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.7 3.112.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.7 3.014.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.6 3.016.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.6 3.018.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.5 2.920.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.4 2.921.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.3 3.0 4.4 2.923.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.2 3.0 4.3 2.825.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.2 2.9 4.3 2.827.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.1 2.9 4.2 2.829.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.1 2.9 4.2 2.731.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 4.0 2.8 4.1 2.733.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 3.9 2.8 4.0 2.735.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.8 2.9 3.9 2.8 4.0 2.737.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.7 2.9 3.8 2.8 3.9 2.739.0 2.4 2.3 2.9 2.6 3.4 2.8 3.6 2.9 3.7 2.9 3.8 2.7 3.8 2.6
63
10.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.5 5.5 9.3 5.612.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.5 5.5 9.2 5.514.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.5 5.5 9.1 5.4
16.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.5 5.5 9.0 5.318.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.5 5.5 8.8 5.320.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.5 5.5 8.7 5.221.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.5 5.5 8.7 5.223.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.4 5.4 8.5 5.125.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.3 5.4 8.4 5.127.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.1 5.3 8.3 5.029.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 8.0 5.2 8.2 5.031.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 7.9 5.1 8.1 4.933.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.6 5.3 7.8 5.1 7.9 4.935.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.5 5.3 7.7 5.1 7.8 4.837.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.4 5.2 7.5 5.0 7.7 4.839.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.2 7.2 5.1 7.4 5.0 7.6 4.7
100
10.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.4 8.5 14.7 8.712.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.4 8.5 14.5 8.514.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.4 8.5 14.4 8.416.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.4 8.5 14.2 8.318.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.4 8.5 14.0 8.220.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.4 8.5 13.8 8.121.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.4 8.5 13.7 8.023.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.2 8.3 13.5 7.925.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 13.0 8.2 13.3 7.8
27.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 12.8 8.1 13.1 7.729.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 12.6 8.0 12.9 7.631.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 12.4 7.9 12.7 7.633.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.9 8.1 12.2 7.8 12.5 7.535.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.8 8.1 12.1 7.7 12.3 7.437.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.6 8.0 11.9 7.7 12.2 7.339.0 7.6 6.2 9.0 6.9 10.5 7.8 11.2 8.0 11.4 7.9 11.7 7.6 12.0 7.2
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 147/308
EDMT34-635A Capacity Tables
FXHQ-MA 141
8
7.2 Heating Capacity
FXHQ-MA [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.50.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.53.0 2.2 3.9 3.9 3.9 3.9 3.7 3.55.0 4.1 4.1 4.1 4.0 3.9 3.7 3.57.0 6.0 4.2 4.2 4.0 3.9 3.7 3.59.0 7.9 4.3 4.3 4.0 3.9 3.7 3.511.0 9.8 4.5 4.3 4.0 3.9 3.7 3.513.0 11.8 4.5 4.3 4.0 3.9 3.7 3.515.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5
63
-19.8 -20.0 4.7 4.7 4.7 4.7 4.7 4.7-18.8 -19.0 4.9 4.9 4.8 4.8 4.8 4.8-16.7 -17.0 5.1 5.1 5.1 5.1 5.1 5.1-14.7 -15.0 5.4 5.4 5.4 5.4 5.4 5.4-12.6 -13.0 5.7 5.7 5.7 5.7 5.7 5.7
-10.5 -11.0 6.0 6.0 6.0 6.0 6.0 5.9-9.5 -10.0 6.1 6.1 6.1 6.1 6.1 6.1-8.5 -9.1 6.3 6.3 6.2 6.2 6.2 6.2-7.0 -7.6 6.5 6.5 6.4 6.4 6.4 6.4-5.0 -5.6 6.8 6.7 6.7 6.7 6.7 6.7-3.0 -3.7 7.0 7.0 7.0 7.0 7.0 7.00.0 -0.7 7.5 7.4 7.4 7.4 7.4 7.03.0 2.2 7.9 7.8 7.8 7.7 7.5 7.05.0 4.1 8.1 8.1 8.0 7.7 7.5 7.07.0 6.0 8.4 8.4 8.0 7.7 7.5 7.09.0 7.9 8.7 8.5 8.0 7.7 7.5 7.011.0 9.8 8.9 8.5 8.0 7.7 7.5 7.013.0 11.8 9.0 8.5 8.0 7.7 7.5 7.015.0 13.7 9.0 8.5 8.0 7.7 7.5 7.0
100
-19.8 -20.0 7.4 7.4 7.3 7.3 7.3 7.3-18.8 -19.0 7.6 7.6 7.6 7.5 7.5 7.5-16.7 -17.0 8.0 8.0 8.0 8.0 8.0 8.0-14.7 -15.0 8.5 8.5 8.4 8.4 8.4 8.4-12.6 -13.0 8.9 8.9 8.9 8.9 8.9 8.8-10.5 -11.0 9.4 9.3 9.3 9.3 9.3 9.3-9.5 -10.0 9.6 9.6 9.5 9.5 9.5 9.5-8.5 -9.1 9.8 9.8 9.7 9.7 9.7 9.7-7.0 -7.6 10.1 10.1 10.1 10.1 10.1 10.0-5.0 -5.6 10.6 10.5 10.5 10.5 10.5 10.5-3.0 -3.7 11.0 11.0 10.9 10.9 10.9 10.90.0 -0.7 11.6 11.6 11.6 11.6 11.6 10.93.0 2.2 12.3 12.3 12.2 12.1 11.7 10.95.0 4.1 12.7 12.7 12.5 12.1 11.7 10.97.0 6.0 13.1 13.1 12.5 12.1 11.7 10.99.0 7.9 13.5 13.3 12.5 12.1 11.7 10.911.0 9.8 14.0 13.3 12.5 12.1 11.7 10.913.0 11.8 14.1 13.3 12.5 12.1 11.7 10.915.0 13.7 14.1 13.3 12.5 12.1 11.7 10.9
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 148/308
Air Velocity and Temperature Distributions (Reference Data) EDMT34-635A
142 FXHQ-MA
8. Air Velocity and Temperature Distributions
(Reference Data)
FXHQ100MAVE
(Heating · Air velocity distribution)
Centre airflow
FXHQ100MAVE
(Heating · Temperature distribution)
Centre airflow
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 149/308
EDMT34-635A Sound Levels
FXHQ-MA 143
8
9. Sound Levels
Overall
Octave Band Level220-240/220V, 50/60Hz
Location of microphone Notes:
1. The operating conditions are assumed to be standard
(JIS conditions).2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipment installed.
dB(A)
Model220-240/220V, 50/60Hz
H L
FXHQ32MAVE 36 31
FXHQ63MAVE 39 34
FXHQ100MAVE 45 37
FXHQ32MAVE FXHQ63MAVE FXHQ100MAVE
Microphone
4D035301 4D035302 4D035303A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 150/308
Accessories EDMT34-635A
144 FXHQ-MA
10.Accessories
10.1 Optional Accessories (for Unit)
4D040446C
10.2 Optional Accessories (for Controls)
Refer to page 282.
Model FXHQ32MAVE FXHQ63MAVE FXHQ100MAVE
Drain pump kit KDU50N60VE KDU50N125VE
Replacement long-life filter(Resin net)
KAF501DA56 KAF501DA80 KAF501DA112
L-type piping kit(for upward direction)
KHFP5MA63 KHFP5MA160
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 151/308
EDMT34-635A
FXAQ-P 145
9
FXAQ-P
Wall Mounted Type
1. Specifications......................................................................................146
2. Dimensions .........................................................................................148
3. Piping Diagrams..................................................................................151
4. Wiring Diagrams..................................................................................152
5. Electric Characteristics........................................................................153
6. Safety Devices Setting........................................................................154
7. Capacity Tables ..................................................................................1557.1 Cooling Capacity ..................................................................................155
7.2 Heating Capacity ..................................................................................156
8. Sound Levels ......................................................................................157
9. Recommended Mounting-plate Retention Spots and Dimensions......158
10.Accessories.........................................................................................15910.1 Optional Accessories (for Unit).............................................................159
10.2 Optional Accessories (for Controls)......................................................159
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 152/308
Specifications EDMT34-635A
146 FXAQ-P
1. Specifications
Wall mounted type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values
are normally somewhat higher as a result of ambient conditions.
6 Refer to page 153 for Fan Motor Input.
Model FXAQ20PVE FXAQ25PVE FXAQ32PVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
14 Cooling capacity (19.5°CWB)
kcal/h 2,000 2,500 3,200
Btu/h 7,800 9,900 12,600
kW 2.3 2.9 3.7
24 Cooling capacity (19°CWB) kW 2.2 2.8 3.6
34 Heating capacity
kcal/h 2,200 2,800 3,400
Btu/h 8,500 10,900 13,600
kW 2.5 3.2 4.0
Casing colour White (3.0Y8.5/0.5) White (3.0Y8.5/0.5) White (3.0Y8.5/0.5)
Dimensions: (H×W×D) mm 290×795×238 290×795×238 290×795×238
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×14×1.4 2×14×1.4 2×14×1.4
Face area m² 0.161 0.161 0.161
Fan
Model QCL9661M QCL9661M QCL9661M
Type Cross flow fan Cross flow fan Cross flow fan
Motor output ×Number of units W 40×1 40×1 40×1
Airflow rate (H/L)m³/min 7.5/4.5 8/5 8.5/5.5
l/s 125/75 133/83 142/91
cfm 265/159 282/177 300/194
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Sound absorbing thermal insulation material Foamed polystyrene / Foamed polyethylene
Foamed polystyrene / Foamed polyethylene
Foamed polystyrene / Foamed polyethylene
Air filter Resin net (Washable) Resin net (Washable) Resin net (Washable)
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mm VP13(External dia. 18 Internal dia. 13)
VP13(External dia. 18 Internal dia. 13)
VP13(External dia. 18 Internal dia. 13)
Mass (Weight) kg 11 11 11
5 Sound level (H/L) dB(A) 35/31 36/31 38/31
Safety devices Fuse Fuse Fuse
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installationmanual. Installation panel. Paperpattern for installation. Insulation tape.Clamps. Screws.
Operation manual. Installationmanual. Installation panel. Paperpattern for installation. Insulation tape.Clamps. Screws.
Operation manual. Installationmanual. Installation panel. Paperpattern for installation. Insulation tape.Clamps. Screws.
Drawing No. C: 3D077064A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 153/308
EDMT34-635A Specifications
FXAQ-P 147
9
Wall mounted type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1 m in front of the unit and 1 m downward. During actual operation, these values
are normally somewhat higher as a result of ambient conditions.
6 Refer to page 153 for Fan Motor Input.
Model FXAQ40PVE FXAQ50PVE FXAQ63PVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
14 Cooling capacity (19.5°CWB)
kcal/h 4,000 5,000 6,300
Btu/h 16,000 19,800 24,900
kW 4.7 5.8 7.3
24 Cooling capacity (19°CWB) kW 4.5 5.6 7.1
34 Heating capacity
kcal/h 4,300 5,400 6,900
Btu/h 17,100 21,500 27,300
kW 5.0 6.3 8.0
Casing colour White (3.0Y8.5/0.5) White (3.0Y8.5/0.5) White (3.0Y8.5/0.5)
Dimensions: (H×W×D) mm 290×1,050×238 290×1,050×238 290×1,050×238
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 2×14×1.4 2×14×1.4 2×14×1.4
Face area m² 0.213 0.213 0.213
Fan
Model QCL9686M QCL9686M QCL9686M
Type Cross flow fan Cross flow fan Cross flow fan
Motor output ×Number of units W 43×1 43×1 43×1
Airflow rate (H/L)
m³/min 12/9 15/12 19/14
l/s 200/150 250/200 316/233
cfm 424/318 530/424 671/494
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Sound absorbing thermal insulation material Foamed polystyrene / Foamed polyethylene
Foamed polystyrene / Foamed polyethylene
Foamed polystyrene / Foamed polyethylene
Air filter Resin net (Washable) Resin net (Washable) Resin net (Washable)
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection)
Drain pipe mm VP13(External dia. 18 Internal dia. 13)
VP13(External dia. 18 Internal dia. 13)
VP13(External dia. 18 Internal dia. 13)
Mass (Weight) kg 14 14 14
5 Sound level (H/L) dB(A) 39/34 42/37 47/41
Safety devices Fuse Fuse Fuse
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installation
manual. Installation panel. Paperpattern for installation. Insulation tape.Clamps. Screws.
Operation manual. Installation
manual. Installation panel. Paperpattern for installation. Insulation tape.Clamps. Screws.
Operation manual. Installation
manual. Installation panel. Paperpattern for installation. Insulation tape.Clamps. Screws.
Drawing No. C: 3D077064A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 154/308
Dimensions EDMT34-635A
148 FXAQ-P
2. Dimensions
FXAQ20PVE / FXAQ25PVE / FXAQ32PVEUnit (mm)
3 D 0 6 5 0 6 4 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 155/308
EDMT34-635A Dimensions
FXAQ-P 149
9
FXAQ40PVE / FXAQ50PVEUnit (mm)
3 D 0 6 5 0 6 5 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 156/308
Dimensions EDMT34-635A
150 FXAQ-P
FXAQ63PVEUnit (mm)
3 D 0 6 5 0 6 6 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 157/308
EDMT34-635A Piping Diagrams
FXAQ-P 151
9
3. Piping Diagrams
Refrigerant pipe connection port diameters
(mm)
Model Gas Liquid
FXAQ20PVE / FXAQ25PVE /FXAQ32PVE / FXAQ40PVE /FXAQ50PVE
φ12.7 φ6.4
FXAQ63PVE φ15.9 φ9.5
4D034245G
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 158/308
Wiring Diagrams EDMT34-635A
152 FXAQ-P
4. Wiring Diagrams
FXAQ20PVE / FXAQ25PVE / FXAQ32PVE / FXAQ40PVE / FXAQ50PVE / FXAQ63PVE
3 D 0 7 6 4 9 8
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 159/308
EDMT34-635A Electric Characteristics
FXAQ-P 153
9
5. Electric Characteristics
4D077066
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 160/308
Safety Devices Setting EDMT34-635A
154 FXAQ-P
6. Safety Devices Setting
C: 4D034906L
Model FXAQ20PVE FXAQ25PVE FXAQ32PVE FXAQ40PVE FXAQ50PVE FXAQ63PVE
Printed circuit board fuse 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A 250V 3.15A
Fan motor thermal fuse °C – – – – – –
Fan motor thermal protector °C – – – – – –
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 161/308
EDMT34-635A Capacity Tables
FXAQ-P 155
9
7. Capacity Tables
7.1 Cooling Capacity
FXAQ-P [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB 14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB
20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB 20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC °CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
20
10.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.9 1.9
63
10.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.5 5.6 9.3 5.312.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.9 1.9 12.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.5 5.6 9.2 5.314.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.8 1.9 14.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.5 5.6 9.1 5.216.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.8 1.9 16.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.5 5.6 9.0 5.218.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.7 1.9 18.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.5 5.6 8.8 5.220.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.7 1.9 20.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.5 5.6 8.7 5.121.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 2.0 2.7 1.9 21.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.5 5.6 8.7 5.123.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 1.9 2.6 1.9 23.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.4 5.5 8.5 5.025.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.6 1.9 2.6 1.9 25.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.3 5.5 8.4 5.027.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.5 1.9 2.6 1.8 27.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.1 5.4 8.3 4.929.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.5 1.9 2.5 1.8 29.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 8.0 5.4 8.2 4.931.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.4 1.9 2.5 1.8 31.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 7.9 5.3 8.1 4.833.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.4 1.9 2.5 1.8 33.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.6 5.4 7.8 5.2 7.9 4.835.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.4 1.9 2.4 1.8 35.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.5 5.4 7.7 5.2 7.8 4.737.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.3 1.9 2.3 1.8 2.4 1.7 37.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.4 5.3 7.5 5.1 7.7 4.739.0 1.5 1.5 1.8 1.8 2.1 1.9 2.2 1.9 2.2 1.9 2.3 1.8 2.3 1.7 39.0 4.8 4.1 5.7 4.6 6.6 5.1 7.1 5.3 7.2 5.3 7.4 5.1 7.6 4.6
25
10.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.4 2.3 3.7 2.312.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.4 2.3 3.6 2.214.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.4 2.3 3.6 2.3
16.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.4 2.3 3.5 2.218.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.4 2.3 3.5 2.220.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.4 2.3 3.4 2.221.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.4 2.3 3.4 2.223.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.3 2.3 3.4 2.225.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.3 2.2 3.3 2.227.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.2 2.2 3.3 2.129.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.2 2.2 3.2 2.131.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.1 2.2 3.2 2.133.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.1 2.2 3.1 2.135.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 3.0 2.2 3.0 2.2 3.1 2.137.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 2.9 2.2 3.0 2.1 3.0 2.039.0 1.9 1.8 2.3 2.0 2.6 2.2 2.8 2.2 2.9 2.2 2.9 2.1 3.0 2.0
32
10.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.3 2.8 4.7 2.812.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.3 2.8 4.7 2.814.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.3 2.8 4.6 2.816.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.3 2.8 4.6 2.818.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.3 2.8 4.5 2.720.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.3 2.8 4.4 2.721.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.3 2.8 4.4 2.723.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.2 2.8 4.3 2.725.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.2 2.8 4.3 2.6
27.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.1 2.7 4.2 2.629.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.1 2.7 4.2 2.631.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 4.0 2.7 4.1 2.633.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 3.9 2.6 4.0 2.535.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.8 2.7 3.9 2.6 4.0 2.537.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.7 2.6 3.8 2.6 3.9 2.539.0 2.4 2.2 2.9 2.4 3.4 2.6 3.6 2.7 3.7 2.6 3.8 2.6 3.8 2.5
40
10.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.4 3.6 5.9 3.612.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.4 3.6 5.8 3.514.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.4 3.6 5.8 3.516.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.4 3.6 5.7 3.518.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.4 3.6 5.6 3.420.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.4 3.6 5.5 3.421.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.4 3.6 5.5 3.423.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.3 3.6 5.4 3.325.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.2 3.6 5.3 3.327.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.2 3.5 5.3 3.329.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.1 3.5 5.2 3.231.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 5.0 3.4 5.1 3.233.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.8 3.6 4.9 3.4 5.0 3.135.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.7 3.6 4.9 3.4 5.0 3.1
37.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.7 3.5 4.8 3.3 4.9 3.139.0 3.0 2.9 3.6 3.3 4.2 3.7 4.5 3.5 4.6 3.5 4.7 3.3 4.8 3.0
50
10.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.7 4.4 7.4 4.412.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.7 4.4 7.3 4.314.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.7 4.4 7.2 4.316.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.7 4.4 7.1 4.318.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.7 4.4 7.0 4.220.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.7 4.4 6.9 4.221.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.7 4.4 6.8 4.223.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.6 4.4 6.7 4.125.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.5 4.3 6.6 4.127.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.4 4.3 6.6 4.029.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.3 4.2 6.5 4.031.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.2 4.2 6.4 3.933.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 6.0 4.3 6.1 4.2 6.3 3.935.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 5.9 4.3 6.0 4.1 6.2 3.837.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 5.8 4.3 5.9 4.1 6.1 3.839.0 3.8 3.2 4.5 3.7 5.2 4.1 5.6 4.2 5.7 4.2 5.8 4.0 6.0 3.8
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 162/308
Capacity Tables EDMT34-635A
156 FXAQ-P
7.2 Heating Capacity
FXAQ-P [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDBUnitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0 16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW °CDB °CWB kW kW kW kW kW kW
20
-19.8 -20.0 1.5 1.5 1.5 1.5 1.5 1.5
63
-19.8 -20.0 4.7 4.7 4.7 4.7 4.7 4.7-18.8 -19.0 1.5 1.5 1.5 1.5 1.5 1.5 -18.8 -19.0 4.9 4.9 4.8 4.8 4.8 4.8
-16.7 -17.0 1.6 1.6 1.6 1.6 1.6 1.6 -16.7 -17.0 5.1 5.1 5.1 5.1 5.1 5.1-14.7 -15.0 1.7 1.7 1.7 1.7 1.7 1.7 -14.7 -15.0 5.4 5.4 5.4 5.4 5.4 5.4-12.6 -13.0 1.8 1.8 1.8 1.8 1.8 1.8 -12.6 -13.0 5.7 5.7 5.7 5.7 5.7 5.7-10.5 -11.0 1.9 1.9 1.9 1.9 1.9 1.9 -10.5 -11.0 6.0 6.0 6.0 6.0 6.0 5.9-9.5 -10.0 1.9 1.9 1.9 1.9 1.9 1.9 -9.5 -10.0 6.1 6.1 6.1 6.1 6.1 6.1-8.5 -9.1 2.0 2.0 1.9 1.9 1.9 1.9 -8.5 -9.1 6.3 6.3 6.2 6.2 6.2 6.2-7.0 -7.6 2.0 2.0 2.0 2.0 2.0 2.0 -7.0 -7.6 6.5 6.5 6.4 6.4 6.4 6.4-5.0 -5.6 2.1 2.1 2.1 2.1 2.1 2.1 -5.0 -5.6 6.8 6.7 6.7 6.7 6.7 6.7-3.0 -3.7 2.2 2.2 2.2 2.2 2.2 2.2 -3.0 -3.7 7.0 7.0 7.0 7.0 7.0 7.00.0 -0.7 2.3 2.3 2.3 2.3 2.3 2.2 0.0 -0.7 7.5 7.4 7.4 7.4 7.4 7.03.0 2.2 2.5 2.5 2.4 2.4 2.3 2.2 3.0 2.2 7.9 7.8 7.8 7.7 7.5 7.05.0 4.1 2.5 2.5 2.5 2.4 2.3 2.2 5.0 4.1 8.1 8.1 8.0 7.7 7.5 7.07.0 6.0 2.6 2.6 2.5 2.4 2.3 2.2 7.0 6.0 8.4 8.4 8.0 7.7 7.5 7.09.0 7.9 2.7 2.7 2.5 2.4 2.3 2.2 9.0 7.9 8.7 8.5 8.0 7.7 7.5 7.011.0 9.8 2.8 2.7 2.5 2.4 2.3 2.2 11.0 9.8 8.9 8.5 8.0 7.7 7.5 7.013.0 11.8 2.8 2.7 2.5 2.4 2.3 2.2 13.0 11.8 9.0 8.5 8.0 7.7 7.5 7.015.0 13.7 2.8 2.7 2.5 2.4 2.3 2.2 15.0 13.7 9.0 8.5 8.0 7.7 7.5 7.0
25
-19.8 -20.0 1.9 1.9 1.9 1.9 1.9 1.9-18.8 -19.0 1.9 1.9 1.9 1.9 1.9 1.9-16.7 -17.0 2.1 2.1 2.0 2.0 2.0 2.0-14.7 -15.0 2.2 2.2 2.2 2.2 2.2 2.1-12.6 -13.0 2.3 2.3 2.3 2.3 2.3 2.3
-10.5 -11.0 2.4 2.4 2.4 2.4 2.4 2.4-9.5 -10.0 2.5 2.4 2.4 2.4 2.4 2.4-8.5 -9.1 2.5 2.5 2.5 2.5 2.5 2.5-7.0 -7.6 2.6 2.6 2.6 2.6 2.6 2.6-5.0 -5.6 2.7 2.7 2.7 2.7 2.7 2.7-3.0 -3.7 2.8 2.8 2.8 2.8 2.8 2.80.0 -0.7 3.0 3.0 3.0 3.0 3.0 2.83.0 2.2 3.1 3.1 3.1 3.1 3.0 2.85.0 4.1 3.3 3.2 3.2 3.1 3.0 2.87.0 6.0 3.4 3.4 3.2 3.1 3.0 2.89.0 7.9 3.5 3.4 3.2 3.1 3.0 2.811.0 9.8 3.6 3.4 3.2 3.1 3.0 2.813.0 11.8 3.6 3.4 3.2 3.1 3.0 2.815.0 13.7 3.6 3.4 3.2 3.1 3.0 2.8
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0
-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.50.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.53.0 2.2 3.9 3.9 3.9 3.9 3.7 3.55.0 4.1 4.1 4.1 4.0 3.9 3.7 3.57.0 6.0 4.2 4.2 4.0 3.9 3.7 3.59.0 7.9 4.3 4.3 4.0 3.9 3.7 3.511.0 9.8 4.5 4.3 4.0 3.9 3.7 3.513.0 11.8 4.5 4.3 4.0 3.9 3.7 3.515.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5
40
-19.8 -20.0 3.0 2.9 2.9 2.9 2.9 2.9-18.8 -19.0 3.0 3.0 3.0 3.0 3.0 3.0-16.7 -17.0 3.2 3.2 3.2 3.2 3.2 3.2-14.7 -15.0 3.4 3.4 3.4 3.4 3.4 3.4-12.6 -13.0 3.6 3.6 3.6 3.5 3.5 3.5-10.5 -11.0 3.7 3.7 3.7 3.7 3.7 3.7-9.5 -10.0 3.8 3.8 3.8 3.8 3.8 3.8-8.5 -9.1 3.9 3.9 3.9 3.9 3.9 3.9-7.0 -7.6 4.0 4.0 4.0 4.0 4.0 4.0-5.0 -5.6 4.2 4.2 4.2 4.2 4.2 4.2
-3.0 -3.7 4.4 4.4 4.4 4.4 4.4 4.40.0 -0.7 4.7 4.6 4.6 4.6 4.6 4.43.0 2.2 4.9 4.9 4.9 4.8 4.7 4.45.0 4.1 5.1 5.1 5.0 4.8 4.7 4.47.0 6.0 5.2 5.2 5.0 4.8 4.7 4.49.0 7.9 5.4 5.3 5.0 4.8 4.7 4.411.0 9.8 5.6 5.3 5.0 4.8 4.7 4.413.0 11.8 5.6 5.3 5.0 4.8 4.7 4.415.0 13.7 5.6 5.3 5.0 4.8 4.7 4.4
50
-19.8 -20.0 3.7 3.7 3.7 3.7 3.7 3.7-18.8 -19.0 3.8 3.8 3.8 3.8 3.8 3.8-16.7 -17.0 4.1 4.0 4.0 4.0 4.0 4.0-14.7 -15.0 4.3 4.3 4.3 4.2 4.2 4.2-12.6 -13.0 4.5 4.5 4.5 4.5 4.5 4.5-10.5 -11.0 4.7 4.7 4.7 4.7 4.7 4.7-9.5 -10.0 4.8 4.8 4.8 4.8 4.8 4.8-8.5 -9.1 4.9 4.9 4.9 4.9 4.9 4.9-7.0 -7.6 5.1 5.1 5.1 5.1 5.1 5.1-5.0 -5.6 5.3 5.3 5.3 5.3 5.3 5.3-3.0 -3.7 5.5 5.5 5.5 5.5 5.5 5.50.0 -0.7 5.9 5.9 5.8 5.8 5.8 5.5
3.0 2.2 6.2 6.2 6.2 6.1 5.9 5.55.0 4.1 6.4 6.4 6.3 6.1 5.9 5.57.0 6.0 6.6 6.6 6.3 6.1 5.9 5.59.0 7.9 6.8 6.7 6.3 6.1 5.9 5.511.0 9.8 7.0 6.7 6.3 6.1 5.9 5.513.0 11.8 7.1 6.7 6.3 6.1 5.9 5.515.0 13.7 7.1 6.7 6.3 6.1 5.9 5.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 163/308
EDMT34-635A Sound Levels
FXAQ-P 157
9
8. Sound Levels
Overall
Octave Band Level220-240/220V, 50/60Hz
Location of microphone Notes:
1. The operating conditions are assumed to be standard(JIS conditions).
2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipment installed.
dB(A)
Model
220-240/220V, 50/60Hz
H L
FXAQ20PVE 35 31
FXAQ25PVE 36 31
FXAQ32PVE 38 31
FXAQ40PVE 39 34
FXAQ50PVE 42 37
FXAQ63PVE 47 41
FXAQ20PVE FXAQ25PVE FXAQ32PVE
FXAQ40PVE FXAQ50PVE FXAQ63PVE
Microphone
4D077090 4D077091 4D077092
4D0770934D077094 4D077095
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 164/308
Recommended Mounting-plate Retention Spots and Dimensions EDMT34-635A
158 FXAQ-P
9. Recommended Mounting-plate Retention Spots and
Dimensions
FXAQ20PVE / FXAQ25PVE / FXAQ32PVE
FXAQ40PVE / FXAQ50PVE / FXAQ63PVE
Liquid pipe
Gas pipe
Center of unit
When fixing a unit with screw fixthe mounting plate with screw
30107 62.520
625
795
450
245.5
235.5
194.5
217.5 15 25
2-12×20(long hole)
25
2 1 . 5
1 7 1
2 6 8
2 9 0
2 0
4 0
2 0
2 0
2 0
66
3
3
3
2 0
2 0
4 4
. 5
98
3 0
3 0
177
50 50 54 23 50
3 7
. 5
44.5
265415320
75
φ 6 5
φ 6 5
60
44.589
4 4
. 5
2 4 5
. 5
1 0 9
44.5
138.5
Hole for concrete wallBolt projection lengthfrom wall surface shouldbe less than 20mm(Bolt size M10)
Temporary hole for fixing
o u
t l i n e o
f u n
i t
o
u t l i n e o
f m o u n
t i n g p
l a t e
Drain hose position
Liquid pipe Gas pipe
Shanghai ARAI
Drain hose position
C: 1P079690C
Keep here the piece cut outfrom the unit for piping
Recommended mounting - plate retentionspots (9 spots in all)
(Bolt size : M10)(Bolt size : M10)Place a leveler on raised tab.b
Use tape
measure
as shown.
Position the
end of tape
measure at ∇.
Gas pipe endLiquid pipe end
∗ The removed pipe port cover can be
kept in the mounting plate pocket. Removed pipe
port cover
A Mounting plate
C: 2P095003D
Through-the-wallhole φ80mm
Drain hose position
φ80 φ80
1 9 7
9 6 . 5 7
2 . 5
3 0 . 5
3 3 . 5
7 1 . 5
7 8 . 5
4 4
1 1
6 6
7 1 . 5
1 0 2
8
8 3 . 5 7
8 . 5
3 0 . 5
1 1 2 . 5 ± 0 . 6
8 0
387.5
8
59±1
202±1
8
74
16
64
225.5
1 2 1 28 8
78
14
3 8
120
250±1.6
1 6 ± 0 . 8
1 3 0 . 5
1 3 4 . 5
1 5 0
7 9
1 . 5
5 5
6
8 8 . 5
1 1 0 . 5
1 8 3 . 6
433±1.2
15±1
403±1.5
8
8
12±1.5
0
290+1
0
3710
–1.5
590
–1 3
0 – 1
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 165/308
EDMT34-635A Accessories
FXAQ-P 159
9
10.Accessories
10.1 Optional Accessories (for Unit)
10.2 Optional Accessories (for Controls)
Refer to page 282.
No. ItemModel
FXAQ20PVE FXAQ25PVE FXAQ32PVE FXAQ40PVE FXAQ50PVE FXAQ63PVE
1 Drain pump kit K-KDU572EVE
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 166/308
Accessories EDMT34-635A
160 FXAQ-P
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 167/308
EDMT34-635A
FXLQ-MA / FXNQ-MA 161
10
FXLQ-MA / FXNQ-MA
Floor Standing Type /
Concealed Floor Standing Type
1. Specifications......................................................................................1621.1 FXLQ-MA .............................................................................................162
1.2 FXNQ-MA.............................................................................................164
2. Dimensions .........................................................................................1662.1 FXLQ-MA .............................................................................................166
2.2 FXNQ-MA.............................................................................................169
3. Piping Diagrams..................................................................................172
4. Wiring Diagrams..................................................................................1735. Electric Characteristics........................................................................174
6. Safety Devices Setting........................................................................175
7. Capacity Tables ..................................................................................1767.1 Cooling Capacity ..................................................................................176
7.2 Heating Capacity ..................................................................................177
8. Sound Levels ......................................................................................178
9. Centre of Gravity .................................................................................180
10.Accessories.........................................................................................18110.1 Optional Accessories (for Unit).............................................................181
10.2 Optional Accessories (for Controls)......................................................181
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 168/308
Specifications EDMT34-635A
162 FXLQ-MA / FXNQ-MA
1. Specifications
1.1 FXLQ-MA
Floor standing type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m. During actual operation, these values
are normally somewhat higher as a result of ambient conditions.
6 Refer to page 174 for Fan Motor Input.
Model FXLQ20MAVE FXLQ25MAVE FXLQ32MAVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
14 Cooling capacity (19.5°CWB)
kcal/h 2,000 2,500 3,200
Btu/h 7,800 9,900 12,600
kW 2.3 2.9 3.7
24 Cooling capacity (19°CWB) kW 2.2 2.8 3.6
34 Heating capacity
kcal/h 2,200 2,800 3,400
Btu/h 8,500 10,900 13,600
kW 2.5 3.2 4.0
Casing colour Ivory white (5Y7.5/1) Ivory white (5Y7.5/1) Ivory white (5Y7.5/1)
Dimensions: (H×W×D) mm 600×1,000×222 600×1,000×222 600×1,140×222
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×14×1.5 3×14×1.5 3×14×1.5
Face area m² 0.159 0.159 0.200
Fan
Model D14B20 D14B20 2D14B13
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 15×1 15×1 25×1
Airflow rate (H/L)
m³/min 7/6 7/6 8/6
l/s 116/100 116/100 133/100
cfm 247/212 247/212 282/212
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Sound absorbing thermal insulation material Glass fiber/ Urethane foam Glass fiber/ Urethane foam Glass fiber/ Urethane foam
Air filter Resin net (with mould resistance) Resin net (with mould resistance) Resin net (with mould resistance)
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mm φ21 O.D (Vinyl chloride) φ21 O.D (Vinyl chloride) φ21 O.D (Vinyl chloride)
Mass (Weight) kg 25 25 30
5 Sound level (H/L)220V, 50/60Hz dB(A) 35/32 35/32 35/32
240V, 50Hz dB(A) 37/34 37/34 37/34
Safety devices Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installationmanual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Operation manual. Installationmanual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Operation manual. Installationmanual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Drawing No. C: 3D038816A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 169/308
EDMT34-635A Specifications
FXLQ-MA / FXNQ-MA 163
10
Floor standing type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m. During actual operation, these values
are normally somewhat higher as a result of ambient conditions.
6 Refer to page 174 for Fan Motor Input.
Model FXLQ40MAVE FXLQ50MAVE FXLQ63MAVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
14 Cooling capacity (19.5°CWB)
kcal/h 4,000 5,000 6,300
Btu/h 16,000 19,800 24,900
kW 4.7 5.8 7.3
24 Cooling capacity (19°CWB) kW 4.5 5.6 7.1
34 Heating capacity
kcal/h 4,300 5,400 6,900
Btu/h 17,100 21,500 27,300
kW 5.0 6.3 8.0
Casing colour Ivory white (5Y7.5/1) Ivory white (5Y7.5/1) Ivory white (5Y7.5/1)
Dimensions: (H×W×D) mm 600×1,140×222 600×1,420×222 600×1,420×222
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×14×1.5 3×14×1.5 3×14×1.5
Face area m² 0.200 0.282 0.282
Fan
Model 2D14B13 2D14B20 2D14B20
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 25×1 35×1 35×1
Airflow rate (H/L)
m³/min 11/8.5 14/11 16/12
l/s 183/141 233/183 266/200
cfm 388/300 494/388 565/424
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Sound absorbing thermal insulation material Glass fiber/ Urethane foam Glass fiber/ Urethane foam Glass fiber/ Urethane foam
Air filter Resin net (with mould resistance) Resin net (with mould resistance) Resin net (with mould resistance)
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection)
Drain pipe mm φ21 O.D (Vinyl chloride) φ21 O.D (Vinyl chloride) φ21 O.D (Vinyl chloride)
Mass (Weight) kg 30 36 36
5 Sound level (H/L)220V, 50/60Hz dB(A) 38/33 39/34 40/35
240V, 50Hz dB(A) 40/35 41/36 42/37
Safety devices Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installation
manual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Operation manual. Installation
manual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Operation manual. Installation
manual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Drawing No. C: 3D038816A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 170/308
Specifications EDMT34-635A
164 FXLQ-MA / FXNQ-MA
1.2 FXNQ-MA
Concealed floor standing type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m. During actual operation, these values
are normally somewhat higher as a result of ambient conditions.
6 Refer to page 174 for Fan Motor Input.
Model FXNQ20MAVE FXNQ25MAVE FXNQ32MAVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
14 Cooling capacity (19.5°CWB)
kcal/h 2,000 2,500 3,200
Btu/h 7,800 9,900 12,600kW 2.3 2.9 3.7
24 Cooling capacity (19°CWB) kW 2.2 2.8 3.6
34 Heating capacity
kcal/h 2,200 2,800 3,400
Btu/h 8,500 10,900 13,600
kW 2.5 3.2 4.0
Casing colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 610×930×220 610×930×220 610×1,070×220
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×14×1.5 3×14×1.5 3×14×1.5
Face area m² 0.159 0.159 0.200
Fan
Model D14B20 D14B20 2D14B13
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 15×1 15×1 25×1
Airflow rate (H/L)
m³/min 7/6 7/6 8/6
l/s 116/100 116/100 133/100
cfm 247/212 247/212 282/212
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Sound absorbing thermal insulation material Glass fiber/ Urethane foam Glass fiber/ Urethane foam Glass fiber/ Urethane foam
Air filter Resin net (with mould resistance) Resin net (with mould resistance) Resin net (with mould resistance)
Pipingconnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ6.4 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ12.7 (Flare connection)
Drain pipe mm φ21 O.D (Vinyl chloride) φ21 O.D (Vinyl chloride) φ21 O.D (Vinyl chloride)
Mass (Weight) kg 19 19 23
5 Sound level (H/L)220V, 50/60Hz dB(A) 35/32 35/32 35/32
240V, 50Hz dB(A) 37/34 37/34 37/34
Safety devices Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installationmanual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Operation manual. Installationmanual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Operation manual. Installationmanual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Drawing No. C: 3D038817A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 171/308
EDMT34-635A Specifications
FXLQ-MA / FXNQ-MA 165
10
Concealed floor standing type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5 m, level difference: 0 m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5 m, level difference: 0 m.
4 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5 m in front of the unit at a height of 1.5 m. During actual operation, these values
are normally somewhat higher as a result of ambient conditions.
6 Refer to page 174 for Fan Motor Input.
Model FXNQ40MAVE FXNQ50MAVE FXNQ63MAVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
14 Cooling capacity (19.5°CWB)
kcal/h 4,000 5,000 6,300
Btu/h 16,000 19,800 24,900
kW 4.7 5.8 7.3
24 Cooling capacity (19°CWB) kW 4.5 5.6 7.1
34 Heating capacity
kcal/h 4,300 5,400 6,900
Btu/h 17,100 21,500 27,300
kW 5.0 6.3 8.0
Casing colour Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 610×1,070×220 610×1,350×220 610×1,350×220
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×14×1.5 3×14×1.5 3×14×1.5
Face area m² 0.200 0.282 0.282
Fan
Model 2D14B13 2D14B20 2D14B20
Type Sirocco fan Sirocco fan Sirocco fan
Motor output ×Number of units W 25×1 35×1 35×1
Airflow rate (H/L)
m³/min 11/8.5 14/11 16/12
l/s 183/141 233/183 266/200
cfm 388/300 494/388 565/424
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Sound absorbing thermal insulation material Glass fiber / Urethane foam Glass fiber / Urethane foam Glass fiber / Urethane foam
Air filter Resin net (with mould resistance) Resin net (with mould resistance) Resin net (with mould resistance)
PipingConnections
Liquid pipes mm φ6.4 (Flare connection) φ6.4 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ12.7 (Flare connection) φ12.7 (Flare connection) φ15.9 (Flare connection)
Drain pipe mm φ21 O.D (Vinyl chloride) φ21 O.D (Vinyl chloride) φ21 O.D (Vinyl chloride)
Mass (Weight) kg 23 27 27
5 Sound level (H/L)220V, 50/60Hz dB(A) 38/33 39/34 40/35
240V, 50Hz dB(A) 40/35 41/36 42/37
Safety devices Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor. Fuse. Thermal protector for fan motor.
Refrigerant control Electronic expansion valve Electronic expansion valve Electronic expansion valve
Standard accessories
Operation manual. Installation
manual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Operation manual. Installation
manual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Operation manual. Installation
manual. Insulation for fitting. Drainhose. Clamps. Screws. Washers.Level adjustment screw.
Drawing No. C: 3D038817A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 172/308
Dimensions EDMT34-635A
166 FXLQ-MA / FXNQ-MA
2. Dimensions
2.1 FXLQ-MA
FXLQ20MAVE / FXLQ25MAVE Unit (mm)
1 0 0 0 O R M O
R E
( B O T T O M )
( R E A R )
B A S E
4 - M
6
1 0 0 O R M O R E
1 0 0 O R M
O R E
2 0 O R M O
R E
H O L E F O R F I X I N G
T O T H E F L O O R
H O L E F O R R E A
R M O U N T I N G
S U C T I O N
( B O T T O M )
F R O N T F A C E
R E Q U I R E D
I N S T A L L A T I O N S P A C E
D I S C H A R G E
L E V E L A D J U S T I N G S C R E W
A S S T A N D A R D A C
C E S S O R Y
1 7 5 0 O R M O R E
1 5 6
6 5
4 2
1 0
2
2 0 9
2 1 9
7 0
5 7 5
2 1 9
1 7 2
1 0
5
9 0
1 4 9
1 9 2 4
1 8 1
1 0 2
1 9 4 6 0 0
5
9 6
2 2 2
3
4 - 1
2 ×
3 0 S L O T H
O L E
3 0 1
2 3 3 1 8 4
1
P E R F O R A T E D H O L E F O R P I P I N G
1 3
1 0
8 8
1 4 3
1 5
2 - 1
2 ×
1 8 S L O T H O L E
5
1 6 5
1 5
5
3 9 1
P E R F O R A T
E D H O L E F O R P I P I N G
2
W I R I N G H O L E 1
0 0 0
N O T E )
N U M B E R
1 2 3 4 5
1 .
L O C A T I O N O F U N I T ' S N A M E P L A T E :
O U T S I D E S U R F A C
E O F R I G H T S I D E P L A T E
.
N A M
E
L I Q U I D P I P E C O N N E C T I O N P O R T
G A S P I P E C O N N E
C T I O N P O R T
D R A I N P I P E C O N N E C T I O N P O R T
S W I T C H B O X
A I R F I L T E R
D E S C R I P T I O N
φ 6
. 4 F L A R E C O N N E C T I O N
φ 1 2
. 7 F L A R E C O N N E C T I O N
O .
D .
2 1
C :
3 D 0 3 8 8 6 0 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 173/308
EDMT34-635A Dimensions
FXLQ-MA / FXNQ-MA 167
10
FXLQ32MAVE / FXLQ40MAVE Unit (mm)
L E V E L A D J U
S T I N G S C R E W
A S S T A N D A R D A C C E S S O R Y
H O L E F O R
F I X I N G
T O T H E F L O O R
R E Q U I R E D I N S T A L L A T I O N S P A C E
1 0 0 O R M O R E
1 0 0 O R M O R E
B A S E
( B O T T O M )
4 - M
6
( R E
A R )
D I S C H A R G E
H O L E F O
R R E A R M O U N T I N G
2 0 O R M O R E
F R O N T F A C E
S U C T I O N
1 0 0 0 O R M O R E
1 7 5 0 O R M O R E
( B O T T O M )
1
2 - 1
2 ×
1 8 S L
O T H O L E
1 5
1 8 4 1 9 2
1 5
7 3 6
1 6 5
7 3 0
2 1 9
4 2
5 7 5 1 9 4
P E R F O R A T E D
H O L E F O R P I P I N G
1 7 2
4 - 1
2 ×
3 0
S L O T H O L E
1 0 2
W I R I N G H O L E
2 1 9
2 3 3
1 4 9
1 0
2 2 2
1 8 1
5
3 0 1
1 4 3
7 0
2
3 9 1
2 0 9
8 8
1 3
1 5 6
1 0
6 5
6 0 0
1 1 4 0
5
4
1 0
2 P E R F O R A T E D H O L E F O R P I P I N G
3
N O T E )
N U M B E R
1 2 3 4 5
1 .
L O C A
T I O N O F U N I T ' S N A M E P L A T E :
O U T S
I D E S U R F A C E O F R I G H T S I D E P L A T E
.
N A M E
L I Q U I D P I P E C O N N E C T I O N P O R T
G A S P I P E C O N N E C T I O N P O R T
D R A I N P I P E C O N N E C T I O N P O R T
S W I T
C H B O X
A I R F
I L T E R
D E S C R I P
T I O N
φ 6
. 4 F L A R E C O N N E C T I O N
φ 1 2
. 7 F L A R E C O
N N E C T I O N
O .
D .
2 1
C :
3 D 0 3 8 8 6 1 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 174/308
Dimensions EDMT34-635A
168 FXLQ-MA / FXNQ-MA
FXLQ50MAVE / FXLQ63MAVE Unit (mm)
( R E A R )
1 7 5 0 O R M O R E
B A S E
S U C T I O N
1 0 0 0 O R M O R E
( B O T T O M )
H O
L E F O R F I X I N G
T O
T H E F L O O R
1 0 0 O R M O R E
1 0 0 O R M O R E
P i p i n g s
i z e ( F i e l d s u p p
l y )
H O
L E F O R R E A R M O U N T I N G
2 0 O R M O R E
( B O T T O M )
F R O N T F A C E
D I S C H A R G E
R E Q U I R E D I N S T A L L A T I O N S P A C E
3 9 1
1 8 4
1 0
1 6 5
1 8 1
7 0
1 2
1 5
4 - 1 2 ×
3 0 S L O T H O L E
1 7 2
1 0 2
5
1 9 4
L E V E L A D J U S T I N G S C R E W
A S S T
A N D A R D A C C E S S O R Y
4 - M
6
1 5
1 9 2
4 2
4
2 - 1 2
× 1 8 S L O T H O L E
6 5
2 1 9
2 3 3 5 7 5
3
1 5 6
1 4 3
1 0
2 0 9
1 4 2 0
3 0 1
1 0 1 6
2
2 1 9
1 4 9
1 0
2 2 2
P E R F O R A T E D H O L E F O R P I P I N G
6 0 0
W I R I N G H O L E
8 8
1 3
1 0 1 0
5
P E R F O R
A T E D H O L E F O R P I P I N G
I n d o o r u n
i t
F X L Q 5 0 M ( A ) V E
F X L Q 6 3 M ( A ) V E
G a s s
i d e
L i q u
i d s
i d e
N O T E ) 1 . L
O C A T I O N O F U N I T ' S N A M E P L A T E :
O
U T S I D E S U R F A C E O F R I G H T S I D E P L A T E
.
N U M B E R
1 2 3 4 5
N A M E
L I Q U I D P I P E C O N N E C T I O N
G A S P I P E C O N N E C T I O N
D R A I N P I P E C O N N E C T I O N P O R T
S W I T C H B O X
A I R F I L T E R
D E S C R
I P T I O N
F L A R E C O
N N E C T I O N
F L A R E C O
N N E C T I O N
O .
D .
2 1
φ 1 2
. 7
φ 1 5
. 9
φ 9 . 5
φ 6 . 4
C :
3 D 0 3 8 8 6 2 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 175/308
EDMT34-635A Dimensions
FXLQ-MA / FXNQ-MA 169
10
2.2 FXNQ-MA
FXNQ20MAVE / FXNQ25MAVE Unit (mm)
1 6 3
1 3 9
3
4 2
T O P P L A T E
1 3 0
1 0 3
4
1 5 2
1 1 2 3 3
6 - φ
4 . 7
H O
L E
6 5
2 5
2 -
φ 4
. 7 H O L E
1
2 0 6
6 5
1 2 9 3 8 9
6 0 9
2 1 8
1 9 2
7
5 9 0
1 9 9
7 4
5 x
1 0 0 =
5 0 0
6 2 0
8 4
3 5
5 6 2
1 8 1
4 2
3 0 1
5 9 6
5
3 9 1
2
1 0 0 0 O R M O R E
H O L E F
O R F I X I N G
T O T H E
F L O O R
H O L E F O R R E A R M O U N T I N G
( D I S C H A R G E F L A N G E )
( D I S C H A R G E F L A N G E )
1 5 0 O R M O R E
4 ×
M 6
R E
Q U I R E D I N S T A L L A T I O N S P A C E
F R O N T F A C E
L E V E L
A D J U S T I N G S C R E W
A S S T A
N D A R D A C C E S S O R Y
H O L E F O R F I X I N G
T O T H E F L O O R
N O T E )
2 - 1
2 × 1 8
S L O T H O L E
T O T A L O
N R I G H T & L E F T
2 0 O R M O R E
4 - 1
2 ×
3 0 S L O T H O L E
T O T A L O N F R O
N T & R E A R
1 .
L O C A T I O N O F U N I T ' S N A M E P L
A T E :
T H E R I G H T L O W E R C O R N E R O
F F R O N T P L A T E
.
N U M B E R
1 2 3 4 5
N A M E
L I Q U I D P I P
E C O N N E C T I O N P O R T
G A S P I P E C O N N E C T I O N P O R T
D R A I N P I P E C O N N E C T I O N P O R T
S W I T C H B O X
A I R F I L T E R
D E S C R I P T I O N
φ 6
. 4 F L A R E C O N N E C
T I O N
φ 1 2
. 7 F L A R E C O N N E C T I O N
O .
D .
2 1
3 D 0
3 8 8 6 3 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 176/308
Dimensions EDMT34-635A
170 FXLQ-MA / FXNQ-MA
FXNQ32MAVE / FXNQ40MAVE Unit (mm)
R E Q U I R E D I N S T A L L A T I O N S P A C E
4 - 1
2 × 3 0 S L O T H O L E
( D I S C H A R G E F L A N G E )
H
O L E F O R F I X I N G
T
O T H E F L O O R
2 0 O R M O R E
H O L E F O R R E A R M O U N T I N G
1 5 0 O R M O R E
F R O N T F A C E
H O L E F O R F I X I N G
T O T H E F L O O R
2 - 1
2 ×
1 8 S L O T H O L E
1 0 0 0 O R M O R E
4 ×
M 6
L E V E L A D J U S T I N G S C R E W
A S S T A N D A R D A C C E S S O R Y
T O T A L O N R I G H T & L E F T
( D I S C H A R G E F L A N G E )
T O T A L O N
F R O N T & R E A R
7 3 0
3 8 9
6 0 9
1 9 9
1 3 0 3 5
4 2
6 5
1 1
2 1 8
7
2 - φ
4 . 7
H O L E
7 4
1 8 1
6 ×
1 0 0 =
6 0 0
1 9 2
1 0 3
7 0 2
6 5
2
2 5
3
1 6 3
2 0 6
1 5 2
T O P P L A T E
4
3 9 1
4 2 1 2 9
5
3 0 1
1
7 6 0
7 - φ 4
. 7 H O L E
2 3 3
7 3 6
1 3 9 8
4
N O T E )
1 .
L O C A T I O N O F U N I T ' S N A M E P L A T E :
T H E R I G H T L O W E R C O R N E R O F F R O N T P L A T E
.
N U M B E R
1 2 3 4 5
N A M E
L I Q U I D P I P E C O N N E C T I O N P O R T
G A S P I P E C O N N E C T I O N P O R T
D R A I N P I P E C O N N E C T I O N P O R T
S W I T C H B O X
A I R F
I L T E R
D E S C R I P
T I O N
φ 6
. 4 F L A R E C O N N E C T I O N
φ 1 2
. 7 F L A R E C O
N N E C T I O N
O .
D .
2 1
3 D 0 3 8 8 6 4 C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 177/308
EDMT34-635A Dimensions
FXLQ-MA / FXNQ-MA 171
10
FXNQ50MAVE / FXNQ63MAVE Unit (mm)
2 - 1
2 ×
1 8 S L O T H O L E
( D I S C H A R G E F L A N G E )
1 0 0 0 O R M O R E
2 0 O R M O R E
1 5 0 O R M O R E
4 ×
M 6
4 - 1
2 ×
3 0 S L O T H O L E
H O L E F O R F I X I N G
T O T H E F L O O R
H O L E F O R F I X I N G
T O T H E F L O O R
R E Q U I R E D I N S T A L L A T I O N S P A C E
L E V E L A D J U S T I N G S C R E W
A S S T A N D A R D A C C E S S O R Y
F R O N T F A C E
( D I S C H A R G E F L A N G E )
T O T A L O N F R O N T & R E A R
H O L E F O R R E A R M O U N T I N G
T O T A L O N R I G H T & L E F T
P i p i n g s
i z e
( F i e l d s u p p
l y )
5
4
2 0 6 1
3 9 7
4
9 ×
1 0 0 =
9 0 0
1 0 1 6
1
1 6 3
1 3 0 3 5
1 0 - φ
4 . 7
H O L E
1 2 9
6 5
3
2 3 3
1 0 1 0
3 0 1
1 9 2
9 8 2
1 8 1
2 5
1 5 2
2
1 0 3
6 5
8 4
3 8 9
3 9 1
4 2
2 - φ
4 . 7
H O L E
7
T O P P L A T E
4 2
1 1
2 1 8
1 9 9
1 0 4 0
6 0 9
I n d o o r u n
i t
F X N Q 5 0 M ( A ) V E
F X N Q 6 3 M ( A ) V E
G a s s
i d e
L i q
u i d s
i d e
N U M B E R
1 2 3 4 5
N A M E
L
I Q U I D P I P E C O N N E C T I O N P O R T
G
A S P I P E C O N N E C T I O N
D
R A I N P I P E C O N N E C T I O N
S
W I T C H B O X
A
I R F I L T E R
D E S C R
I P T I O N
F L A R E C O N N E C T I O N
F L A R E C O N N E C T I O N
O .
D .
2 1
1 .
L O C A T I O N O F U N I T ' S N A M E P L A T E :
T H E R I G H T L O W E R C O R N E R O F F R O
N T P L A T E
.
φ 1 2
. 7
φ 6
. 4
φ 1 5
. 9
φ 1 5
. 9
C :
3 D 0 3 8 8 6 5 C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 178/308
Piping Diagrams EDMT34-635A
172 FXLQ-MA / FXNQ-MA
3. Piping Diagrams
Refrigerant pipe connection port diameters
4D034245G
(mm)
Model Gas Liquid
FXLQ20MAVE / FXLQ25MAVE / FXLQ32MAVE /FXLQ40MAVE / FXLQ50MAVE
FXNQ20MAVE / FXNQ25MAVE / FXNQ32MAVE /FXNQ40MAVE / FXNQ50MAVE
φ12.7 φ6.4
FXLQ63MAVEFXNQ63MAVE
φ15.9 φ9.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 179/308
EDMT34-635A Wiring Diagrams
FXLQ-MA / FXNQ-MA 173
10
4. Wiring Diagrams
FXLQ20MAVE / FXLQ25MAVE / FXLQ32MAVE / FXLQ40MAVE / FXLQ50MAVE / FXLQ63MAVE
FXNQ20MAVE / FXNQ25MAVE / FXNQ32MAVE / FXNQ40MAVE / FXNQ50MAVE / FXNQ63MAVE
C :
3 D 0 3 9 8 2 6 G
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 180/308
Electric Characteristics EDMT34-635A
174 FXLQ-MA / FXNQ-MA
5. Electric Characteristics
C: 4D034579E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 181/308
EDMT34-635A Safety Devices Setting
FXLQ-MA / FXNQ-MA 175
10
6. Safety Devices Setting
C: 3D034529F
ModelFXLQ20MAVEFXNQ20MAVE
FXLQ25MAVEFXNQ25MAVE
FXLQ32MAVEFXNQ32MAVE
FXLQ40MAVEFXNQ40MAVE
FXLQ50MAVEFXNQ50MAVE
FXLQ63MAVEFXNQ63MAVE
Printed circuit board fuse 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A 250V 5A
Fan motor thermal fuse °C – – – – – –
Fan motor thermal protector °C OFF: 135±10ON : 120 or less
OFF: 135±10ON : 120 or less
OFF: 135±10ON : 120 or less
OFF: 135±10ON : 120 or less
OFF: 135±10ON : 120 or less
OFF: 135±10ON : 120 or less
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 182/308
Capacity Tables EDMT34-635A
176 FXLQ-MA / FXNQ-MA
7. Capacity Tables
7.1 Cooling Capacity
FXLQ-MA / FXNQ-MA [50/60Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB 14.0 °CWB 16.0 °CWB 18.0 °CWB 19.0 °CWB 20.0 °CWB 22.0 °CWB 24.0 °CWB
20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB 20 °CDB 23 °CDB 26 °CDB 27 °CDB 28 °CDB 30 °CDB 32 °CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC °CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
20
10.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.8 2.9 1.8
63
10.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.5 5.1 9.3 5.012.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.8 2.9 1.7 12.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.5 5.1 9.2 5.014.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.8 2.8 1.7 14.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.5 5.1 9.1 4.916.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.8 2.8 1.7 16.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.5 5.1 9.0 4.818.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.8 2.7 1.7 18.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.5 5.1 8.8 4.820.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.8 2.7 1.6 20.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.5 5.1 8.7 4.721.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.8 2.7 1.6 21.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.5 5.1 8.7 4.723.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.8 2.6 1.6 23.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.4 5.0 8.5 4.625.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.6 1.7 2.6 1.6 25.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.3 5.0 8.4 4.527.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.5 1.7 2.6 1.6 27.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.1 4.9 8.3 4.529.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.5 1.7 2.5 1.6 29.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 8.0 4.8 8.2 4.531.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.4 1.7 2.5 1.6 31.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 7.9 4.7 8.1 4.433.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.8 2.4 1.7 2.5 1.6 33.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.6 5.0 7.8 4.7 7.9 4.435.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.4 1.6 2.4 1.5 35.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.5 4.9 7.7 4.7 7.8 4.337.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.3 1.7 2.3 1.6 2.4 1.6 37.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.4 4.9 7.5 4.6 7.7 4.239.0 1.5 1.3 1.8 1.5 2.1 1.7 2.2 1.7 2.2 1.7 2.3 1.6 2.3 1.5 39.0 4.8 3.7 5.7 4.2 6.6 4.8 7.1 4.9 7.2 4.8 7.4 4.6 7.6 4.2
25
10.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.4 2.1 3.7 2.112.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.4 2.1 3.6 2.114.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.4 2.1 3.6 2.1
16.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.4 2.1 3.5 2.118.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.4 2.1 3.5 2.020.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.4 2.1 3.4 2.021.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.4 2.1 3.4 2.023.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.3 2.1 3.4 2.025.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.3 2.1 3.3 2.027.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.2 2.1 3.3 1.929.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.2 2.0 3.2 1.931.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.1 2.0 3.2 1.933.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.1 2.0 3.1 1.935.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 3.0 2.1 3.0 2.0 3.1 1.937.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 2.9 2.0 3.0 2.0 3.0 1.939.0 1.9 1.6 2.3 1.8 2.6 2.0 2.8 2.1 2.9 2.0 2.9 2.0 3.0 1.9
32
10.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.3 2.6 4.7 2.612.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.3 2.6 4.7 2.614.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.3 2.6 4.6 2.616.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.3 2.6 4.6 2.518.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.3 2.6 4.5 2.520.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.3 2.6 4.4 2.521.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.3 2.6 4.4 2.523.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.2 2.6 4.3 2.425.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.2 2.6 4.3 2.4
27.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.1 2.5 4.2 2.429.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.1 2.5 4.2 2.431.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 4.0 2.5 4.1 2.433.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.6 3.9 2.4 4.0 2.335.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.8 2.5 3.9 2.4 4.0 2.337.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.5 3.7 2.5 3.8 2.4 3.9 2.339.0 2.4 2.1 2.9 2.2 3.4 2.5 3.6 2.6 3.7 2.5 3.8 2.4 3.8 2.3
40
10.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.4 3.3 5.9 3.312.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.4 3.3 5.8 3.314.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.4 3.3 5.8 3.216.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.4 3.3 5.7 3.218.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.4 3.3 5.6 3.120.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.4 3.3 5.5 3.121.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.4 3.3 5.5 3.123.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.3 3.2 5.4 3.025.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.2 3.2 5.3 3.027.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.2 3.1 5.3 3.029.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.1 3.1 5.2 3.031.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 5.0 3.1 5.1 2.933.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.8 3.2 4.9 3.0 5.0 2.935.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.7 3.2 4.9 3.1 5.0 2.9
37.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.1 4.7 3.2 4.8 3.0 4.9 2.839.0 3.0 2.5 3.6 2.7 4.2 3.1 4.5 3.2 4.6 3.1 4.7 3.0 4.8 2.8
50
10.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.4 4.112.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.3 4.114.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.2 4.016.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.1 4.018.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 7.0 3.920.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 6.9 3.921.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.7 4.1 6.8 3.823.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.6 4.0 6.7 3.825.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.5 4.0 6.6 3.727.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.4 3.9 6.6 3.729.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.3 3.9 6.5 3.731.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.2 3.8 6.4 3.733.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 6.0 4.0 6.1 3.8 6.3 3.635.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 5.9 4.0 6.0 3.8 6.2 3.637.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 5.8 3.9 5.9 3.7 6.1 3.639.0 3.8 3.0 4.5 3.4 5.2 3.8 5.6 3.9 5.7 3.9 5.8 3.7 6.0 3.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 183/308
EDMT34-635A Capacity Tables
FXLQ-MA / FXNQ-MA 177
10
7.2 Heating Capacity
FXLQ-MA / FXNQ-MA [50/60Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDBUnitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0 16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW °CDB °CWB kW kW kW kW kW kW
20
-19.8 -20.0 1.5 1.5 1.5 1.5 1.5 1.5
63
-19.8 -20.0 4.7 4.7 4.7 4.7 4.7 4.7-18.8 -19.0 1.5 1.5 1.5 1.5 1.5 1.5 -18.8 -19.0 4.9 4.9 4.8 4.8 4.8 4.8
-16.7 -17.0 1.6 1.6 1.6 1.6 1.6 1.6 -16.7 -17.0 5.1 5.1 5.1 5.1 5.1 5.1-14.7 -15.0 1.7 1.7 1.7 1.7 1.7 1.7 -14.7 -15.0 5.4 5.4 5.4 5.4 5.4 5.4-12.6 -13.0 1.8 1.8 1.8 1.8 1.8 1.8 -12.6 -13.0 5.7 5.7 5.7 5.7 5.7 5.7-10.5 -11.0 1.9 1.9 1.9 1.9 1.9 1.9 -10.5 -11.0 6.0 6.0 6.0 6.0 6.0 5.9-9.5 -10.0 1.9 1.9 1.9 1.9 1.9 1.9 -9.5 -10.0 6.1 6.1 6.1 6.1 6.1 6.1-8.5 -9.1 2.0 2.0 1.9 1.9 1.9 1.9 -8.5 -9.1 6.3 6.3 6.2 6.2 6.2 6.2-7.0 -7.6 2.0 2.0 2.0 2.0 2.0 2.0 -7.0 -7.6 6.5 6.5 6.4 6.4 6.4 6.4-5.0 -5.6 2.1 2.1 2.1 2.1 2.1 2.1 -5.0 -5.6 6.8 6.7 6.7 6.7 6.7 6.7-3.0 -3.7 2.2 2.2 2.2 2.2 2.2 2.2 -3.0 -3.7 7.0 7.0 7.0 7.0 7.0 7.00.0 -0.7 2.3 2.3 2.3 2.3 2.3 2.2 0.0 -0.7 7.5 7.4 7.4 7.4 7.4 7.03.0 2.2 2.5 2.5 2.4 2.4 2.3 2.2 3.0 2.2 7.9 7.8 7.8 7.7 7.5 7.05.0 4.1 2.5 2.5 2.5 2.4 2.3 2.2 5.0 4.1 8.1 8.1 8.0 7.7 7.5 7.07.0 6.0 2.6 2.6 2.5 2.4 2.3 2.2 7.0 6.0 8.4 8.4 8.0 7.7 7.5 7.09.0 7.9 2.7 2.7 2.5 2.4 2.3 2.2 9.0 7.9 8.7 8.5 8.0 7.7 7.5 7.011.0 9.8 2.8 2.7 2.5 2.4 2.3 2.2 11.0 9.8 8.9 8.5 8.0 7.7 7.5 7.013.0 11.8 2.8 2.7 2.5 2.4 2.3 2.2 13.0 11.8 9.0 8.5 8.0 7.7 7.5 7.015.0 13.7 2.8 2.7 2.5 2.4 2.3 2.2 15.0 13.7 9.0 8.5 8.0 7.7 7.5 7.0
25
-19.8 -20.0 1.9 1.9 1.9 1.9 1.9 1.9-18.8 -19.0 1.9 1.9 1.9 1.9 1.9 1.9-16.7 -17.0 2.1 2.1 2.0 2.0 2.0 2.0-14.7 -15.0 2.2 2.2 2.2 2.2 2.2 2.1-12.6 -13.0 2.3 2.3 2.3 2.3 2.3 2.3
-10.5 -11.0 2.4 2.4 2.4 2.4 2.4 2.4-9.5 -10.0 2.5 2.4 2.4 2.4 2.4 2.4-8.5 -9.1 2.5 2.5 2.5 2.5 2.5 2.5-7.0 -7.6 2.6 2.6 2.6 2.6 2.6 2.6-5.0 -5.6 2.7 2.7 2.7 2.7 2.7 2.7-3.0 -3.7 2.8 2.8 2.8 2.8 2.8 2.80.0 -0.7 3.0 3.0 3.0 3.0 3.0 2.83.0 2.2 3.1 3.1 3.1 3.1 3.0 2.85.0 4.1 3.3 3.2 3.2 3.1 3.0 2.87.0 6.0 3.4 3.4 3.2 3.1 3.0 2.89.0 7.9 3.5 3.4 3.2 3.1 3.0 2.811.0 9.8 3.6 3.4 3.2 3.1 3.0 2.813.0 11.8 3.6 3.4 3.2 3.1 3.0 2.815.0 13.7 3.6 3.4 3.2 3.1 3.0 2.8
32
-19.8 -20.0 2.4 2.4 2.3 2.3 2.3 2.3-18.8 -19.0 2.4 2.4 2.4 2.4 2.4 2.4-16.7 -17.0 2.6 2.6 2.6 2.6 2.6 2.5-14.7 -15.0 2.7 2.7 2.7 2.7 2.7 2.7-12.6 -13.0 2.9 2.8 2.8 2.8 2.8 2.8-10.5 -11.0 3.0 3.0 3.0 3.0 3.0 3.0-9.5 -10.0 3.1 3.1 3.1 3.1 3.0 3.0
-8.5 -9.1 3.1 3.1 3.1 3.1 3.1 3.1-7.0 -7.6 3.2 3.2 3.2 3.2 3.2 3.2-5.0 -5.6 3.4 3.4 3.4 3.4 3.4 3.4-3.0 -3.7 3.5 3.5 3.5 3.5 3.5 3.50.0 -0.7 3.7 3.7 3.7 3.7 3.7 3.53.0 2.2 3.9 3.9 3.9 3.9 3.7 3.55.0 4.1 4.1 4.1 4.0 3.9 3.7 3.57.0 6.0 4.2 4.2 4.0 3.9 3.7 3.59.0 7.9 4.3 4.3 4.0 3.9 3.7 3.511.0 9.8 4.5 4.3 4.0 3.9 3.7 3.513.0 11.8 4.5 4.3 4.0 3.9 3.7 3.515.0 13.7 4.5 4.3 4.0 3.9 3.7 3.5
40
-19.8 -20.0 3.0 2.9 2.9 2.9 2.9 2.9-18.8 -19.0 3.0 3.0 3.0 3.0 3.0 3.0-16.7 -17.0 3.2 3.2 3.2 3.2 3.2 3.2-14.7 -15.0 3.4 3.4 3.4 3.4 3.4 3.4-12.6 -13.0 3.6 3.6 3.6 3.5 3.5 3.5-10.5 -11.0 3.7 3.7 3.7 3.7 3.7 3.7-9.5 -10.0 3.8 3.8 3.8 3.8 3.8 3.8-8.5 -9.1 3.9 3.9 3.9 3.9 3.9 3.9-7.0 -7.6 4.0 4.0 4.0 4.0 4.0 4.0-5.0 -5.6 4.2 4.2 4.2 4.2 4.2 4.2
-3.0 -3.7 4.4 4.4 4.4 4.4 4.4 4.40.0 -0.7 4.7 4.6 4.6 4.6 4.6 4.43.0 2.2 4.9 4.9 4.9 4.8 4.7 4.45.0 4.1 5.1 5.1 5.0 4.8 4.7 4.47.0 6.0 5.2 5.2 5.0 4.8 4.7 4.49.0 7.9 5.4 5.3 5.0 4.8 4.7 4.411.0 9.8 5.6 5.3 5.0 4.8 4.7 4.413.0 11.8 5.6 5.3 5.0 4.8 4.7 4.415.0 13.7 5.6 5.3 5.0 4.8 4.7 4.4
50
-19.8 -20.0 3.7 3.7 3.7 3.7 3.7 3.7-18.8 -19.0 3.8 3.8 3.8 3.8 3.8 3.8-16.7 -17.0 4.1 4.0 4.0 4.0 4.0 4.0-14.7 -15.0 4.3 4.3 4.3 4.2 4.2 4.2-12.6 -13.0 4.5 4.5 4.5 4.5 4.5 4.5-10.5 -11.0 4.7 4.7 4.7 4.7 4.7 4.7-9.5 -10.0 4.8 4.8 4.8 4.8 4.8 4.8-8.5 -9.1 4.9 4.9 4.9 4.9 4.9 4.9-7.0 -7.6 5.1 5.1 5.1 5.1 5.1 5.1-5.0 -5.6 5.3 5.3 5.3 5.3 5.3 5.3-3.0 -3.7 5.5 5.5 5.5 5.5 5.5 5.50.0 -0.7 5.9 5.9 5.8 5.8 5.8 5.5
3.0 2.2 6.2 6.2 6.2 6.1 5.9 5.55.0 4.1 6.4 6.4 6.3 6.1 5.9 5.57.0 6.0 6.6 6.6 6.3 6.1 5.9 5.59.0 7.9 6.8 6.7 6.3 6.1 5.9 5.511.0 9.8 7.0 6.7 6.3 6.1 5.9 5.513.0 11.8 7.1 6.7 6.3 6.1 5.9 5.515.0 13.7 7.1 6.7 6.3 6.1 5.9 5.5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 184/308
Sound Levels EDMT34-635A
178 FXLQ-MA / FXNQ-MA
8. Sound Levels
Overall
Notes:
1. The operating conditions are assumed to be standard (JIS conditions).
2. These operating values were obtained in a dead room (conversion values).
Sound level will vary depending on a range of factors such as the construction (acoustic absorption coefficient) of
the particular room in which the equipment installed.
Location of microphone Location of microphone
dB(A) dB(A)
Model220V, 50/60Hz 240V, 50Hz
Model220V, 50/60Hz 240V, 50Hz
H L H L H L H L
FXLQ20MAVEFXLQ25MAVEFXLQ32MAVE
35 32 37 34FXNQ20MAVEFXNQ25MAVEFXNQ32MAVE
35 32 37 34
FXLQ40MAVE 38 33 40 35 FXNQ40MAVE 38 33 40 35
FXLQ50MAVE 39 34 41 36 FXNQ50MAVE 39 34 41 36
FXLQ63MAVE 40 35 42 37 FXNQ63MAVE 40 35 42 37
grille
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 185/308
EDMT34-635A Sound Levels
FXLQ-MA / FXNQ-MA 179
10
Octave Band Level220V, 50/60Hz
240V, 50Hz
FXLQ20MAVE / FXLQ25MAVE FXLQ32MAVE FXLQ40MAVE
FXLQ50MAVE FXLQ63MAVE
FXNQ20MAVE / FXNQ25MAVE FXNQ32MAVE FXNQ40MAVE
FXNQ50MAVE FXNQ63MAVE
4D034528A 4D034564A 4D034565A
4D034566A 4D034567A
4D034534B 4D034535A 4D034536B
4D034537B 4D034538B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 186/308
Centre of Gravity EDMT34-635A
180 FXLQ-MA / FXNQ-MA
9. Centre of Gravity
FXLQ20MAVE / FXLQ25MAVE / FXLQ32MAVE / FXLQ40MAVE / FXLQ50MAVE / FXLQ63MAVE
FXNQ20MAVE / FXNQ25MAVE / FXNQ32MAVE / FXNQ40MAVE / FXNQ50MAVE / FXNQ63MAVE
C: 4D034527C
500
570
710
Unit (mm)
FXLQ32MAVE • FXLQ40MAVE
FXLQ50MAVE • FXLQ63MAVE
FXLQ20MAVE • FXLQ25MAVE
C: 4D034533C
395
465
505
Unit (mm)
FXNQ20MAVE • FXNQ25MAVE
FXNQ32MAVE • FXNQ40MAVE
FXNQ50MAVE • FXNQ63MAVE
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 187/308
EDMT34-635A Accessories
FXLQ-MA / FXNQ-MA 181
10
10.Accessories
10.1 Optional Accessories (for Unit)
C: 4D034574B
10.2 Optional Accessories (for Controls)
Refer to page 282.
ModelFXLQ20MAVEFXNQ20MAVE
FXLQ25MAVEFXNQ25MAVE
FXLQ32MAVEFXNQ32MAVE
FXLQ40MAVEFXNQ40MAVE
FXLQ50MAVEFXNQ50MAVE
FXLQ63MAVEFXNQ63MAVE
Long life replacement filter KAFJ361K28 KAFJ361K45 KAFJ361K71
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 188/308
Accessories EDMT34-635A
182 FXLQ-MA / FXNQ-MA
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 189/308
EDMT34-635A
FXUQ-MA 183
11
FXUQ-MA
Ceiling Suspended Cassette Type
Connection Unit Series)
1. Specifications......................................................................................184
2. Dimensions .........................................................................................186
3. Piping Diagrams..................................................................................189
4. Wiring Diagrams..................................................................................190
5. Electric Characteristics........................................................................192
6. Safety Devices Setting........................................................................193
7. Capacity Tables ..................................................................................1947.1 Cooling Capacity ..................................................................................194
7.2 Heating Capacity ..................................................................................195
8. Air Velocity and Temperature Distributions (Reference Data) ............196
9. Sound Levels ......................................................................................199
10.Centre of Gravity .................................................................................200
11.Accessories.........................................................................................20111.1 Optional Accessories (for Indoor Unit) .................................................201
11.2 Optional Accessories (for Controls)......................................................201
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 190/308
Specifications EDMT34-635A
184 FXUQ-MA
1. Specifications
Ceiling suspended cassette type
Notes:1 Indoor temp.: 27°CDB, 19.5°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
3 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5m, level difference: 0m.
4 Capacities are net, including a deduction for cooling (an additional for heating) for indoor fan motor heat.
5 Anechoic chamber conversion value, measured at a point 1.5m downward from the unit center. During actual operation, these values are
normally somewhat higher as a result of ambient conditions.
6 Refer to page 192 for Fan Motor Input.
ModelIndoor unit FXUQ71MAV1 FXUQ100MAV1 FXUQ125MAV1
Connection unit BEVQ71MAVE BEVQ100MAVE BEVQ125MAVE
Power supply 1 phase, 220-240V, 50Hz 1 phase, 220-240V, 50Hz 1 phase, 220-240V, 50Hz
1 4 Cooling capacity (19.5°CWB)
kcal/h 7,100 10,000 12,500
Btu/h 28,300 39,600 49,500
kW 8.3 11.6 14.5
2 4 Cooling capacity (19°CWB) kW 8.0 11.2 14.0
3 4 Heating capacity (Max.)
kcal/h 7,700 10,800 12,000
Btu/h 30,700 42,700 47,700
kW 9.0 12.5 14.0
Casing colour White (10Y9/0.5) White (10Y9/0.5) White (10Y9/0.5)
Dimensions: (H×W×D) mm 165×895×895 230×895×895 230×895×895
Coil (Crossfin coil)
Rows×Stages×Fin pitch mm 3×6×1.5 3×8×1.5 3×8×1.5
Face area m² 0.265 0.353 0.353
Fan
Model QTS48A10M QTS50B15M QTS50B15M
Type Turbo fan Turbo fan Turbo fan
Motor output ×
Number of units W 45×1 90×1 90×1
Airflow rate (H/L)
m³/min 19/14 29/21 32/23
l/s 316/233 483/350 533/383
cfm 671/494 1,024/741 1,130/812
Drive Direct drive Direct drive Direct drive
Temperature control Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Microprocessor thermostat forcooling and heating
Sound absorbing thermal insulation material Heat resistant foamed polyethylene /Regular foamed polyethylene
Heat resistant foamed polyethylene /Regular foamed polyethylene
Heat resistant foamed polyethylene /Regular foamed polyethylene
Air filter Resin net (with mould resistance) Resin net (with mould resistance) Resin net (with mould resistance)
Pipingconnections
Liquid pipes mm φ9.5 (Flare connection) φ9.5 (Flare connection) φ9.5 (Flare connection)
Gas pipes mm φ15.9 (Flare connection) φ15.9 (Flare connection) φ15.9 (Flare connection)
Drain pipe mm VP20(External dia. 26 Internal dia. 20)
VP20(External dia. 26 Internal dia. 20)
VP20(External dia. 26 Internal dia. 20)
Mass (Weight) kg 25 31 31
5 Sound level (H/L) 230V, 50Hz dB(A) 40/35 43/38 44/39Safety devices Fan motor thermal protector Fan motor thermal protector Fan motor thermal protector
Standard accessories
Operation manual. Installationmanual. Drain hose. Clamp metal.Insulation for fitting. Sealing pads.Clamps. Washers. Holding plate.
Operation manual. Installationmanual. Drain hose. Clamp metal.Insulation for fitting. Sealing pads.Clamps. Washers. Holding plate.
Operation manual. Installationmanual. Drain hose. Clamp metal.Insulation for fitting. Sealing pads.Clamps. Washers. Holding plate.
Drawing No. C: 4D045395A
Conversion formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 191/308
EDMT34-635A Specifications
FXUQ-MA 185
11
BEV units
Model BEVQ71MAVE BEVQ100MAVE BEVQ125MAVE
Power supply 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz 1 phase, 220-240/220V, 50/60Hz
Casing Galvanized steel plate Galvanized steel plate Galvanized steel plate
Dimensions: (H×W×D) mm 100×350×225 100×350×225 100×350×225
Sound absorbing thermal insulation material Flame and heat resistant foamed
polyethylene
Flame and heat resistant foamed
polyethylene
Flame and heat resistant foamed
polyethylene
Pipingconnection
Indoorunit
Liquidpipes mm φ 9.5 (Flare connection) φ 9.5 (Flare connection) φ 9.5 (Flare connection)
Gas pipes mm φ 15.9 (Flare connection) φ 15.9 (Flare connection) φ 15.9 (Flare connection)
Outdoorunit
Liquidpipes mm φ 9.5 (Flare connection) φ 9.5 (Flare connection) φ 9.5 (Flare connection)
Suction gaspipes mm φ 15.9 (Flare connection) φ 15.9 (Flare connection) φ 15.9 (Flare connection)
Mass (Weight) kg 3.0 3.0 3.5
Standard accessoriesInstallation manual. Gas piping
connections. Insulation for fitting.Sealing material. Clamps.
Installation manual. Gas pipingconnections. Insulation for fitting.
Sealing material. Clamps.
Installation manual. Gas pipingconnections. Insulation for fitting.
Sealing material. Clamps.
Drawing No. 4D045387A 4D045387A 4D045388A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 192/308
Dimensions EDMT34-635A
186 FXUQ-MA
2. Dimensions
FXUQ71MAV1Unit (mm)
3 D 0 1 3 8 6 0 F
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 193/308
EDMT34-635A Dimensions
FXUQ-MA 187
11
FXUQ100MAV1 / FXUQ125MAV1Unit (mm)
3 D 0 4 4 8 9 8 D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 194/308
Dimensions EDMT34-635A
188 FXUQ-MA
BEVQ71MAVE / BEVQ100MAVE / BEVQ125MAVE (When installing the unit on wall)
BEVQ71MAVE / BEVQ100MAVE / BEVQ125MAVE (When hanging the unit from the ceiling)
( S e r v i c i n g s p a c e )
INSTALLATION FIGURE
(Servicing space)
( S e r v i c i n g s p a c
e )
( S u s p e n s i o n b o l t p i t c h )
(Servicing space)
(When installing the unit on wall)
1
2
3
4
5
6
7Wire connection port (Power supply • Ground)
φ15.9mm flare connection
Suspension bolt
Part name
Wire connection port (Transmission (VRV) • Gas pipe thermistor)
φ9.5mm flare connection
Gas pipe connection port
DescriptionNumber
Liquid pipe connection port
Electric parts box
Wire connection port (Indoor unit connection)
4
( 5 0 )
2 8 7
2
37
( 5 0 )
1
( 1 6 5 . 5
)
5
1 0 0
3
100~2501
6
100 or more
9 7
265
4
2 0 0 o r m o r e
4
66
2 2 5
30182
350
(Servicing space)500 or more
2
7
2 0 0 o r m o r e
219 (Note 2)
37
4-M4 Mounting
Notes) 1. Be sure to install wire connection port to be sure to become downward.2. Be sure to secure the space which can be the tightening work of the flare nut.
Unit (mm)
3D045389
3
2 5 5
Inspection hatch
4
9 7
6 6
200 or more
( 1 6 5 . 5
)
200 or more
2 2 5
182
350 (Note 2)
( 4 9 . 9 )
100~250
3 0 5
219
5
3 0
1 0 0
265
100 or more
( N o t e 3 )
( 5 0 )
( S u s p e n s i o n b o l t p i t c h )
(Servicing space)
(Suspension bolt pitch)
(Servicing space)
(Servicing space)(Servicing space)
(When hanging the unit from the ceiling)
761 4
2
2
41
450
INSTALLATION FIGURE
Notes) 1. Be sure to install wire connection port to be sure tobecome downward.
2. Be sure to secure the space which can be thetightening work of the flare nut.
3. Be sure to secure the space of 400mm or more whenyou cannot install the inspection hatch right under theunit. 1
2
34
5
6
7Wire connection port (Power supply • Ground)
φ15.9mm flare connection
Suspension bolt
Part name
Wire connection port (Transmission (VRV) • Gas pipe thermistor)
φ9.5mm flare connection
Gas pipe connection port
DescriptionNumber
Liquid pipe connection port
Electric parts box
Wire connection port (Indoor unit connection)
3D045390
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 195/308
EDMT34-635A Piping Diagrams
FXUQ-MA 189
11
3. Piping Diagrams
FXUQ71MAV1 / FXUQ100MAV1 / FXUQ125MAV1
BEVQ71MAVE / BEVQ100MAVE / BEVQ125MAVE
C: 4D037995L
9.5
15.9
4D034127B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 196/308
Wiring Diagrams EDMT34-635A
190 FXUQ-MA
4. Wiring Diagrams
FXUQ71MAV1 / FXUQ100MAV1 / FXUQ125MAV1
I N D O O R U N I T
P O W E R
S U P P
L Y
2 2 0 - 2
4 0 V
~ 5 0 H z
T C
X 3 5 A
X 2 M
X 3 0 A
X 1 M
X 2 4 A
V 1 T R
S S 1
S 1 L
S S 2
S 1 Q
S S 1
R y P
H 4 P
R 2 T
R 1 T
H 3 P
Q 1 M
M 1 P
H 2 P
M 1 F
M 1 S
H 1 P
B S 1
H B P
A 4 P
A 3 P
H A P
C 1
S S 1
A 2 P
R 1 T
A 1 P
T H E R M I S T O R ( A I R )
X 1 M
R 2 T
H B P
S S 1
X 1 0 A
X 2 M
X 2 5 A
M 1 S
t ˚
M S W ~
L I G H T E M I T T I N G D I O D E ( F I L T E R S I G N - R
E D )
I N D O O R U N I T
W I R E D R E M O T E
C O N T R O L L E R
L I G H T E M I T T I N G D I O D E ( D E F R O S T - O
R A N G
E )
W I R E D R E M O T E C O N T R O L L E R
S E L E C T O R S W I T C H ( W I R E L E S S A D D R E S S
S E T )
L I G H T E M I T T I N G D I O D E ( T I M E R - G
R E E N )
R E C E I V
E R / D I S P L A Y U N I T ( A T T A C H E D T O W I R E L E S S R E M O T E C O N T R
O L L E R )
X 1 1 A
X 3 3 A
R C
R 1
T
S E L E C T O R S W I T C H ( M A I N / S U B )
X 2 4 A
P U S H B U T T O N ( O N / O F F )
A 1 P
R E D
X 1 A
F 2
W H T
C O N N E C T O R F O R O P T I O N A L P A R T S
P R I N T E D C I R C U I T B O A R D
M ~
A 2
P
1
X 1 8 A
X 2 4 A
S S 1
W H T
G R N / Y L W
B L U
S E L E C T O R S W I T C H ( M A I N / S U B )
R y
A
R y
P
B L K
T C
X 2 A
M ~
X 3 0 A
X 3 5 A
H A P
S 1 L
t ˚
X 1 5 A
L I G H T E M I T T I N G D I O D E ( O N - R
E D )
X 1 9 A
X 2 9 A
P 1
X 2 7 A
P R I N T E D C I R C U I T B O A R D
( N O T E 5 )
P 2
X 2 0 A
3
X 1 4 A X
5 A
B L K
Y L W
P 2
F 1
B L U
M 1 F
X 3 0 A
Q 1 M
( N O T E 3 )
B E V U N I T
2
E M E R G .
R 1 T
N O R M .
M 1 P
S 1 Q P
1
R E D
C 1
X 3 5 A
t ˚
X 3 A
2
X 1 A
L 3 1 N
C O N N E C T O R ( G R O U P C O N T R O L A D A P T O R
)
H 3 P
S S 1
( N O T E 5 )
S S 2
A 3 P
B S
1
H 1 P
H 2 P
X 2 A
X 1 A
H 4 P
R E C E I V E R / D I S P L A Y U N I T
X 1 A
A 1 P
A 4 P
C O N N E C T O R ( I N T E R F A C E A D A P T O R F O R S K Y A I R S E
R I E S )
C O N N E C T O R ( W I R E L E S S R E M O T E C O N T R O L
L E R )
V 1 T R
C 1
X 1 M
S S 1 A 1 P
X 2 M
C O N T R O L B O X
A 2 P
R y A
S I G N A L T R A N S M I S S I O N C I R C U I T
S I G N A L R E C E I V E R
F L O A T S W I T C H
T E R M I N A L S T R I P
S E L E C T O R S W I T C H ( E M E R G E N C Y )
P H A S E C O N T R O L C I R C U I T
L I M I T S W I T C H ( S W I N G F L A P )
T E R M I N A L S T R I P
M O T O R ( D R A I N P U M P )
M A G N E T I C R E L A Y ( M 1 P )
P R I N T E D C I R C U I T B O A R D ( T R A N S F O R M E R 2 2 0 ~ 2 4 0 V / 1 6 V )
T H E R M I S T O R ( C O I L )
T H E R M I S T O R ( A I R )
L I G H T E M I T T I N G D I O D E ( S E R V I C E M O N I T O R G R
E E N )
L I G H T E M I T T I N G D I O D E ( S E R V I C E M O N I T O R G R
E E N )
M A G N E T I C R E L A Y ( M 1 A )
C A P A C I T O R ( M 1 F )
M O T O R ( I N D O O R F A N )
M O T O R ( S W I N G F L A P )
T H E R M O S W I T C H ( M 1 F E M B E D D E D )
P R I N T E D C I R C U I T B O A R D
M
X 2 4 A
N O T E S )
1 .
: T E R M I N A L
: C O N N E C T O R
2 .
: F I E L D W I R I N G
3 .
T H E B E V U N I T S H O W S A N O U T L I N E
. P L E A S E R E F E R T O A W I R I N G D I A G R A
M O F B E V U N I T P A S T I N G I N D E T A I L
.
4 .
I N C A S E U S I N G C E N T R A L R E M
O T E C O N T R O L L E R
, C O N N E C T I T T O T H E U N I T I N A C C O R D A N C E W I T H T H E A T T A C H E D
I N S T A L L A T I O N M A N U A L
.
5 .
X 2 4 A I S C O N N E C T E D W H E N T H E W I R E L E S S R E M O T E C O N T R O L L E R K I T I S
B E I N G U S E D
.
6 .
R E M O T E C O N T R O L L E R M O D E
L V A R I E S A C C O R D I N G T O T H E C O M B I N A T I O
N S Y S T E M
, C O N F I R M E N G I N E E R I N G M A T E R
I A L S
A N D C A T A L O G S
, E T C
. B E F O R E C O N N E C T I N G
.
7 .
C O N F I R M T H E M E T H O D O F S E
T T I N G T H E S E L E C T O R S W I T C H ( S S 1
, S S 2 ) O
F W I R E D R E M O T E C O N T R O L L E R A N D W I R E L E S S
R E M O T E C O N T R O L L E R B Y I N S
T A L L A T I O N M A N U A L A N D E N G I N E E R I N G D A
T A
, E T C
.
8 .
S Y M B O L S S H O W
A S F O L L O W S
:
R E D :
R E D
B L K :
B L A C K
W H T
: W H I T E
Y L W
: Y E L L O W
G R N :
G R E E N
B L U
: B L U E
R C
C :
3 D 0
4 4 9 7 3 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 197/308
EDMT34-635A Wiring Diagrams
FXUQ-MA 191
11
BEVQ71MAVE / BEVQ100MAVE / BEVQ125MAVE
P O W E R
S U P P L Y
X 1 M
R E D
Z 4 F
A 1 P
H A P
t ˚
N =
3
T E R M I N A
L S T R I P ( T R A N S M I S S I O N )
R E D
F U S E ( B
, 1 0 A
, 2 5 0 V )
X 7 A
F 1 U
X 2 A
P R I N T E D
C I R C U I T B O A R D A S S Y
L
X 2 M
Z 1 C
X 2 A
H A
P
L I G H T E M
I T T I N G D I O D E
( S E R V I C E M O N I T O R - G
R E E N )
X 1 1 A
T H E R M I S
T O R ( G A S )
E L E C T R O
N I C E X P A N S I O N V A L V E
N
X 4 A
Y 1 E
X 1 A
X 1 A
P O W E R S U P P L Y P R I N T E D C I R C U I T
B O A R D A
S S Y ( 2 2 0 - 2
4 0 V / 1 6 V )
F 1 U
C
O N T R O L B O X
X 1 M
S E L E C T O
R S W I T C H ( M / S )
T E R M I N A
L S T R I P ( P O W E R )
X 3 A
3
2 2 0 - 2
4 0 V
~ 5 0 H z
Y 1 E
1
B L U
B E V U N I T
A 2
P
R 3 T
2
T O
I N D O O R U N I T
T O O U T D O O R U N I T
F 2
N E
N O
I S E F I L T E R
A 1 P
B L U
S S 1
X 5 A
M S
A 2 P
X 2 M
S S 1
A 1 P
N = 2
X 1 M
A 2 P
B L U
Z 2 C
Z 3 C
Z 1 C •
Z 2 C
Z 3 C •
Z 4 F
R 3 T
X 2 M
F 1
W H T
B L K
X 5 A
F 1 F 2
S S 1
M
2 2 0 V
~ 6 0 H z
N O T E S ) 1
.
: T E R M I N A L
: C O N N E C T O R
2 .
: F I E L D W I R I N G
3 .
T H I S W I R I N G D I A G R A M O N L Y S H
O W S T H E B E V U N I T
.
S E E T H E W I R I N G D I A G R A M S A N D I N S T A L L A T I O N M A N U A L S F O R T H E W I R I N G A N D S E T T I N G S F O R T H E I N D O O R
, O U T D O
O R
, A N D B S U N I T S
.
4 .
S E E T H E I N D O O R U N I T ' S W I R I N G
D I A G R A M W H E N I N S T A L L I N G O P T I O N A L P A R T S F O R T H E I N D O O R U N I T
.
5 .
O N L Y O N E I N D O O R U N I T M A Y B E C O N N E C T E D T O T H E B E V U N I T
.
S E E T H E I N D O O R U N I T ' S W I R I N G
D I A G R A M F O R W H E N C O N N E C T I N G T H E R
E M O T E C O N T R O L
.
6 .
A L W A Y S U S E T H E S K Y A I R C O N N E C T I O N A D A P T E R F O R T H E I N D O O R U N I T W H E N U S I N G A C E N T R A L C O N T R O L U N I T
.
R E F E R T O T H E M A N U A L A T T A C H
E D T H E U N I T W H E N C O N N E C T I N G
.
7 .
C O O L / H E A T C H A N G E O V E R O F I N
D O O R U N I T S C O N N E C T E D T O B E V U N I T C A
N N O T B E C A R R I E D O U T U N L E S S T H E Y A R E
C O N N E C T E D T O B S U N I T
.
I N C A S E O F A S Y S T E M W I T H B E V U N I T O N L Y
, C O O L / H E A T S E L E C T O R I S R E Q U I R E D
.
8 .
S E T T H E S S 1 T O " M " O N L Y F O R T H E B E V U N I T C O N N E C T E D T O T H E I N D O O R
U N I T W H I C H I S T O H A V E C O O L / H E A T S W I T
C H I N G C A P A B I L I T Y
, W H E N C O N N E C T I N G T H
E B S U N I T
.
T H E " M / S " O N T H E S S 1 S T A N D S F O R " M A I N / S U B " .
T H I S I S S E T T O " S " W H E N S H I P P
E D F R O M T H E F A C T O R Y
.
9 .
C O N N E C T T H E A T T A C H E D T H E R
M I S T O R T O T H E R 3 T
.
1 0
. S Y M B O L S S H O W
A S F O L L O W S .
( B L U :
B L U E
R E D :
R E D
W H T : W
H I T E
B L K :
B L A C K )
C :
3 D 0 4 4 9 0 1 B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 198/308
Electric Characteristics EDMT34-635A
192 FXUQ-MA
5. Electric Characteristics
C: 4D034128B
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 199/308
EDMT34-635A Safety Devices Setting
FXUQ-MA 193
11
6. Safety Devices Setting
C: 4D013856H
Model FXUQ71MAV1 FXUQ100MAV1 FXUQ125MAV1
Fuse – – –
Fan motor thermal fuse °C – – –
Fan motor thermal protector °C OFF: 130±5 OFF: 130±5 OFF: 130±5
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 200/308
Capacity Tables EDMT34-635A
194 FXUQ-MA
7. Capacity Tables
7.1 Cooling Capacity
FXUQ-MA [50Hz] Cooling capacity
TC: Total capacity: kWSHC: Sensible heat capacity: kW
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoor
air temp.
Indoor air temp.14.0°CWB 16.0°CWB 18.0°CWB 19.0°CWB 20.0°CWB 22.0°CWB 24.0°CWB
20°CDB 23°CDB 26°CDB 27°CDB 28°CDB 30°CDB 32°CDB°CDB TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC TC SHC
71
10.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.6 6.2 10.5 6.312.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.6 6.2 10.4 6.214.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.6 6.2 10.3 6.216.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.6 6.2 10.1 6.118.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.6 6.2 10.0 6.020.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.6 6.2 9.8 5.921.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.6 6.2 9.8 5.923.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.4 6.2 9.6 5.825.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.3 6.1 9.5 5.727.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.2 6.0 9.4 5.729.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 9.0 5.9 9.2 5.731.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 8.9 5.8 9.1 5.633.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.5 6.0 8.7 5.8 8.9 5.635.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.0 8.4 6.0 8.6 5.7 8.8 5.537.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 5.9 8.3 6.0 8.5 5.8 8.7 5.439.0 5.4 4.8 6.4 5.2 7.5 5.8 8.0 6.1 8.1 5.9 8.3 5.6 8.5 5.4
100
10.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.4 8.4 14.7 8.512.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.4 8.4 14.5 8.414.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.4 8.4 14.4 8.3
16.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.4 8.4 14.2 8.218.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.4 8.4 14.0 8.120.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.4 8.4 13.8 8.021.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.4 8.4 13.7 7.923.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.2 8.2 13.5 7.825.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 13.0 8.1 13.3 7.727.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 12.8 8.0 13.1 7.729.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 12.6 7.9 12.9 7.631.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 12.4 7.9 12.7 7.633.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.9 8.3 12.2 7.8 12.5 7.635.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.8 8.3 12.1 7.7 12.3 7.437.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.6 8.3 11.9 7.7 12.2 7.339.0 7.6 6.6 9.0 7.1 10.5 8.0 11.2 8.2 11.4 8.2 11.7 7.6 12.0 7.3
125
10.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.8 10.7 18.4 10.812.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.8 10.7 18.2 10.714.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.8 10.7 18.0 10.516.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.8 10.7 17.7 10.418.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.8 10.7 17.5 10.220.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.8 10.7 17.2 10.121.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.8 10.7 17.1 10.023.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.5 10.5 16.9 9.925.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.3 10.4 16.6 9.9
27.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 16.1 10.2 16.4 9.829.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 15.8 10.1 16.2 9.731.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 15.6 10.0 15.9 9.633.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.9 10.6 15.3 9.9 15.7 9.635.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.8 10.5 15.1 9.9 15.4 9.437.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.5 10.5 14.9 9.8 15.2 9.439.0 9.5 8.0 11.3 9.0 13.1 9.9 14.0 10.4 14.3 10.2 14.6 9.6 15.0 9.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 201/308
EDMT34-635A Capacity Tables
FXUQ-MA 195
11
7.2 Heating Capacity
FXUQ-MA [50Hz] Heating capacity
Refer to outdoor unit capacity tables for the actual performance data of each indoor and outdoor unit combination.
Unitsize
Outdoorair temp.
Indoor air temp. °CDB16.0 18.0 20.0 21.0 22.0 24.0
°CDB °CWB kW kW kW kW kW kW
71
-19.8 -20.0 5.3 5.3 5.3 5.3 5.3 5.3-18.8 -19.0 5.5 5.5 5.4 5.4 5.4 5.4-16.7 -17.0 5.8 5.8 5.8 5.7 5.7 5.7-14.7 -15.0 6.1 6.1 6.1 6.1 6.1 6.1-12.6 -13.0 6.4 6.4 6.4 6.4 6.4 6.4-10.5 -11.0 6.7 6.7 6.7 6.7 6.7 6.7-9.5 -10.0 6.9 6.9 6.9 6.9 6.9 6.8-8.5 -9.1 7.1 7.0 7.0 7.0 7.0 7.0-7.0 -7.6 7.3 7.3 7.3 7.3 7.2 7.2-5.0 -5.6 7.6 7.6 7.6 7.6 7.5 7.5-3.0 -3.7 7.9 7.9 7.9 7.9 7.9 7.90.0 -0.7 8.4 8.4 8.3 8.3 8.3 7.93.0 2.2 8.9 8.8 8.8 8.7 8.4 7.95.0 4.1 9.1 9.1 9.0 8.7 8.4 7.97.0 6.0 9.5 9.4 9.0 8.7 8.4 7.99.0 7.9 9.8 9.6 9.0 8.7 8.4 7.911.0 9.8 10.1 9.6 9.0 8.7 8.4 7.913.0 11.8 10.1 9.6 9.0 8.7 8.4 7.915.0 13.7 10.1 9.6 9.0 8.7 8.4 7.9
100
-19.8 -20.0 7.4 7.4 7.3 7.3 7.3 7.3-18.8 -19.0 7.6 7.6 7.6 7.5 7.5 7.5-16.7 -17.0 8.0 8.0 8.0 8.0 8.0 8.0-14.7 -15.0 8.5 8.5 8.4 8.4 8.4 8.4-12.6 -13.0 8.9 8.9 8.9 8.9 8.9 8.8
-10.5 -11.0 9.4 9.3 9.3 9.3 9.3 9.3-9.5 -10.0 9.6 9.6 9.5 9.5 9.5 9.5-8.5 -9.1 9.8 9.8 9.7 9.7 9.7 9.7-7.0 -7.6 10.1 10.1 10.1 10.1 10.1 10.0-5.0 -5.6 10.6 10.5 10.5 10.5 10.5 10.5-3.0 -3.7 11.0 11.0 10.9 10.9 10.9 10.90.0 -0.7 11.6 11.6 11.6 11.6 11.6 10.93.0 2.2 12.3 12.3 12.2 12.1 11.7 10.95.0 4.1 12.7 12.7 12.5 12.1 11.7 10.97.0 6.0 13.1 13.1 12.5 12.1 11.7 10.99.0 7.9 13.5 13.3 12.5 12.1 11.7 10.911.0 9.8 14.0 13.3 12.5 12.1 11.7 10.913.0 11.8 14.1 13.3 12.5 12.1 11.7 10.915.0 13.7 14.1 13.3 12.5 12.1 11.7 10.9
125
-19.8 -20.0 8.3 8.2 8.2 8.2 8.2 8.2-18.8 -19.0 8.5 8.5 8.4 8.4 8.4 8.4-16.7 -17.0 9.0 9.0 9.0 8.9 8.9 8.9-14.7 -15.0 9.5 9.5 9.5 9.4 9.4 9.4-12.6 -13.0 10.0 10.0 10.0 10.0 9.9 9.9-10.5 -11.0 10.5 10.5 10.4 10.4 10.4 10.4-9.5 -10.0 10.8 10.7 10.7 10.7 10.7 10.6-8.5 -9.1 11.0 10.9 10.9 10.9 10.9 10.8-7.0 -7.6 11.3 11.3 11.3 11.3 11.2 11.2-5.0 -5.6 11.8 11.8 11.8 11.8 11.7 11.7-3.0 -3.7 12.3 12.3 12.3 12.2 12.2 12.20.0 -0.7 13.0 13.0 13.0 13.0 13.0 12.23.0 2.2 13.8 13.7 13.7 13.6 13.1 12.25.0 4.1 14.2 14.2 14.0 13.6 13.1 12.27.0 6.0 14.7 14.7 14.0 13.6 13.1 12.29.0 7.9 15.2 14.9 14.0 13.6 13.1 12.211.0 9.8 15.6 14.9 14.0 13.6 13.1 12.213.0 11.8 15.8 14.9 14.0 13.6 13.1 12.215.0 13.7 15.8 14.9 14.0 13.6 13.1 12.2
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 202/308
Air Velocity and Temperature Distributions (Reference Data) EDMT34-635A
196 FXUQ-MA
8. Air Velocity and Temperature Distributions
(Reference Data)
FXUQ71MAV1 (Cooling)
FXUQ71MAV1 (Heating)
4D028396D
4D013863E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 203/308
EDMT34-635A Air Velocity and Temperature Distributions (Reference Data)
FXUQ-MA 197
11
FXUQ100MAV1 (Cooling)
FXUQ100MAV1 (Heating)
4D028397D
4D014054E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 204/308
Air Velocity and Temperature Distributions (Reference Data) EDMT34-635A
198 FXUQ-MA
FXUQ125MAV1 (Cooling)
FXUQ125MAV1 (Heating)
4D028398D
4D014055E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 205/308
EDMT34-635A Sound Levels
FXUQ-MA 199
11
9. Sound Levels
Overall
Octave Band Level
230V, 50Hz
Location of microphone Notes:
1. The operating conditions are assumed to be standard
(JIS conditions).
2. These operating values were obtained in a dead
room (conversion values).
Sound level will vary depending on a range of factors
such as the construction (acoustic absorption
coefficient) of the particular room in which the
equipments installed.dB(A)
Model230V, 50Hz
H L
FXUQ71MAV1 40 35
FXUQ100MAV1 43 38
FXUQ125MAV1 44 39
FXUQ71MAV1 FXUQ100MAV1 FXUQ125MAV1
4D014037E 4D014038E 4D014039E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 206/308
Centre of Gravity EDMT34-635A
200 FXUQ-MA
10.Centre of Gravity
BEVQ71MAVE / BEVQ100MAVE / BEVQ125MAVEUnit (mm)
3D030851E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 207/308
EDMT34-635A Accessories
FXUQ-MA 201
11
11.Accessories
11.1 Optional Accessories (for Indoor Unit)
C: 3D045452A
11.2 Optional Accessories (for Controls)
Refer to page 282.
Model FXUQ71MAV1 FXUQ100MAV1 FXUQ125MAV1
Sealing member of air discharge outlet KDBH49FA80 KDBH49FA140
Decoration panel for air discharge KDBT49FA80 KDBT49FA140
Vertical flap kit KDGJ49FA80 KDGJ49FA140
Replacement long life filter KAF495FA140
L connection piping kit KHFP49MA140
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 208/308
Accessories EDMT34-635A
202 FXUQ-MA
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 209/308
EDMT34-635A
Outdoor Units 203
Part 3
Outdoor Units
RX(Y)MQ-P
Heat Pump 50/60Hz
Cooling Only 50/60Hz . . . . . . . . . . . . . . . . . . . . . .205
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 210/308
EDMT34-635A
204 Outdoor Units
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 211/308
EDMT34-635A
RX(Y)MQ-P 205
12
RX Y)MQ-P
Heat Pump 50/60Hz
Cooling Only 50/60Hz
1. Specifications......................................................................................2061.1 Heat Pump 50/60Hz <RXYMQ-PVE> ..................................................206
1.2 Cooling Only 50/60Hz <RXMQ-PVE>..................................................208
2. Dimensions .........................................................................................210
3. Service Space.....................................................................................212
4. Piping Diagrams..................................................................................214
5. Wiring Diagrams..................................................................................215
5.1 Heat Pump ...........................................................................................2155.2 Cooling Only.........................................................................................216
6. Field Wiring .........................................................................................217
7. Electric Characteristics........................................................................218
8. Safety Devices Setting........................................................................219
9. Capacity Tables ..................................................................................2209.1 Cooling Capacity ..................................................................................220
9.2 Heating Capacity ..................................................................................223
9.3 Capacity Correction Factor...................................................................226
9.4 Notes for Heating Capacity Characteristics (Heat Pump) ....................228
10.Operation Limits ..................................................................................22910.1 Heat Pump ...........................................................................................229
10.2 Cooling Only.........................................................................................230
11.Sound Levels ......................................................................................23111.1 Overall ..................................................................................................231
11.2 Octave Band Level...............................................................................231
12.Accessories.........................................................................................23212.1 Optional Accessories............................................................................232
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 212/308
Specifications EDMT34-635A
206 RX(Y)MQ-P
1. Specifications
1.1 Heat Pump 50/60Hz <RXYMQ-PVE>
Notes:∗1 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
∗2 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5m, level difference: 0m.
3 The power input (PI) (Compressor + Outdoor Fan Motor): Refer to page 220~.
Model Name RXYMQ4PVE RXYMQ5PVE
Power Supply 1 phase, 220-230/220V, 50/60Hz 1 phase, 220-230/220V, 50/60Hz
∗1 Cooling Capacity
kcal / h 9,600 12,000
Btu / h 38,200 47,800
kW 11.2 14.0
∗2 Heating Capacity
kcal / h 10,800 13,800
Btu / h 42,700 54,600
kW 12.5 16.0
Casing Color Ivory White Ivory White
Dimensions: (H×W×D) mm 1,345×900×320 1,345×900×320
Heat Exchanger Cross Fin Coil Cross Fin Coil
Compressor
Type Hermetically Sealed Scroll Type Hermetically Sealed Scroll Type
Displacement m³/h 19.36 19.36
Number of Revolutions r/min 6,480 6,480
Motor Output×Number of Units kW 2.5×1 3.0×1
Starting Method Direct on line Direct on line
Fan
Type Propeller Fan Propeller Fan
Motor Output W 70×2 70×2Airflow Rate m³/min 106 106
Drive Direct Drive Direct Drive
ConnectingPipes
Liquid Pipe mm φ9.5 (Flare Connection) φ9.5 (Flare Connection)
Gas Pipe mm φ15.9 (Flare Connection) φ15.9 (Flare Connection)
Machine Weight kg 125 125
Safety Devices High Pressure Switch, Fan Driver Overload Protector,Inverter Overload Protector, Fusible Plugs, Fuse
High Pressure Switch, Fan Driver Overload Protector,Inverter Overload Protector, Fusible Plugs, Fuse
Defrost Method Reverse cycle defrosting Reverse cycle defrosting
Capacity Control % 24~100 24~100
Refrigerant
Refrigerant Name R-410A R-410A
Charge kg 4.0 4.0
Control Electronic Expansion Valve Electronic Expansion Valve
Refrigerator Oil Refer to the nameplate of compressor. Refer to the nameplate of compressor.
Standard Accessories Installation Manual, Operation Manual, Clamps Installation Manual, Operation Manual, Clamps
Drawing No. C: 4D052608 C: 4D052608
Conversion Formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 213/308
EDMT34-635A Specifications
RX(Y)MQ-P 207
12Notes:∗1 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
∗2 Indoor temp.: 20°CDB / outdoor temp.: 7°CDB, 6°CWB / Equivalent piping length: 7.5m, level difference: 0m.
3 The power input (PI) (Compressor + Outdoor Fan Motor): Refer to page 220~.
Model Name RXYMQ6PVE
Power Supply 1 phase, 220-230/220V, 50/60Hz
∗1 Cooling Capacity
kcal / h 13,300
Btu / h 52,900
kW 15.5
∗2 Heating Capacity
kcal / h 15,500
Btu / h 61,400
kW 18.0
Casing Color Ivory White
Dimensions: (H×W×D) mm 1,345×900×320
Heat Exchanger Cross Fin Coil
Compressor
Type Hermetically Sealed Scroll Type
Displacement m³/h 19.36
Number of Revolutions r/min 6,480
Motor Output×Number of Units kW 3.5×1
Starting Method Direct on line
Fan
Type Propeller Fan
Motor Output W 70×2
Airflow Rate m³/min 106
Drive Direct Drive
ConnectingPipes
Liquid Pipe mm φ9.5 (Flare Connection)
Gas Pipe mm φ19.1 (Brazing Connection)
Machine Weight kg 125
Safety Devices High Pressure Switch, Fan Driver Overload Protector,Inverter Overload Protector, Fusible Plugs, Fuse
Defrost Method Reverse cycle defrosting
Capacity Control % 24~100
Refrigerant
Refrigerant Name R-410A
Charge kg 4.0
Control Electronic Expansion Valve
Refrigerator Oil Refer to the nameplate of compressor.
Standard Accessories Installation Manual, Operation Manual, Clamps,Auxiliary Piping
Drawing No. C: 4D052608
Conversion Formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 214/308
Specifications EDMT34-635A
208 RX(Y)MQ-P
1.2 Cooling Only 50/60Hz <RXMQ-PVE>
Notes:∗1 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2 The power input (PI) (Compressor + Outdoor Fan Motor): Refer to page220~.
Model Name RXMQ4PVE RXMQ5PVE
Power Supply 1 phase, 220-230/220V, 50/60Hz 1 phase, 220-230/220V, 50/60Hz
∗1 Cooling Capacity
kcal / h 9,600 12,000
Btu / h 38,200 47,800
kW 11.2 14.0
Casing Color Ivory White Ivory White
Dimensions: (H×W×D) mm 1,345×900×320 1,345×900×320
Heat Exchanger Cross Fin Coil Cross Fin Coil
Compressor
Type Hermetically Sealed Scroll Type Hermetically Sealed Scroll Type
Displacement m³/h 19.36 19.36
Number of Revolutions r/min 6,480 6,480
Motor Output×Number of Units kW 2.5×1 3.0×1
Starting Method Direct on line Direct on line
Fan
Type Propeller Fan Propeller Fan
Motor Output W 70×2 70×2
Airflow Rate m³/min 106 106
Drive Direct Drive Direct Drive
ConnectingPipes
Liquid Pipe mm φ9.5 (Flare Connection) φ9.5 (Flare Connection)
Gas Pipe mm φ15.9 (Flare Connection) φ15.9 (Flare Connection)
Machine Weight kg 125 125Safety Devices High Pressure Switch, Fan Driver Overload Protector,
Inverter Overload Protector, Fusible Plugs, FuseHigh Pressure Switch, Fan Driver Overload Protector,Inverter Overload Protector, Fusible Plugs, Fuse
Defrost Method Reverse cycle defrosting Reverse cycle defrosting
Capacity Control % 24~100 24~100
Refrigerant
Refrigerant Name R-410A R-410A
Charge kg 4.0 4.0
Control Electronic Expansion Valve Electronic Expansion Valve
Refrigerator Oil Refer to the nameplate of compressor. Refer to the nameplate of compressor.
Standard Accessories Installation Manual, Operation Manual, Clamps Installation Manual, Operation Manual, Clamps
Drawing No. C: 4D052613 C: 4D052613
Conversion Formulae
kcal/h=kW×860Btu/h=kW×3412
cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 215/308
EDMT34-635A Specifications
RX(Y)MQ-P 209
12
Notes:∗1 Indoor temp.: 27°CDB, 19°CWB / outdoor temp.: 35°CDB / Equivalent piping length: 7.5m, level difference: 0m.
2 The power input (PI) (Compressor + Outdoor Fan Motor): Refer to page220~.
Model Name RXMQ6PVE
Power Supply 1 phase, 220-230/220V, 50/60Hz
∗1 Cooling Capacity
kcal / h 13,300
Btu / h 52,900
kW 15.5
Casing Color Ivory White
Dimensions: (H×W×D) mm 1,345×900×320
Heat Exchanger Cross Fin Coil
Compressor
Type Hermetically Sealed Scroll Type
Displacement m³/h 19.36
Number of Revolutions r/min 6,480
Motor Output×Number of Units kW 3.5×1
Starting Method Direct on line
Fan
Type Propeller Fan
Motor Output W 70×2
Airflow Rate m³/min 106
Drive Direct Drive
ConnectingPipes
Liquid Pipe mm φ9.5 (Flare Connection)
Gas Pipe mm φ19.1 (Brazing Connection)
Machine Weight kg 125
Safety Devices High Pressure Switch, Fan Driver Overload Protector,Inverter Overload Protector, Fusible Plugs, Fuse
Defrost Method Reverse cycle defrosting
Capacity Control % 24~100
Refrigerant
Refrigerant Name R-410A
Charge kg 4.0
Control Electronic Expansion Valve
Refrigerator Oil Refer to the nameplate of compressor.
Standard Accessories Installation Manual, Operation Manual, Clamps,Auxiliary Piping
Drawing No. C: 4D052613
Conversion Formulae
kcal/h=kW×860
Btu/h=kW×3412cfm=m³/min×35.3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 216/308
Dimensions EDMT34-635A
210 RX(Y)MQ-P
2. Dimensions
RX(Y)MQ4PVE/RX(Y)MQ5PVEUnit: mm
3 D 0 5 2 6 1 5 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 217/308
EDMT34-635A Dimensions
RX(Y)MQ-P 211
12
RX(Y)MQ6PVEUnit: mm
3 D 0 5 2 6 1 6 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 218/308
Service Space EDMT34-635A
212 RX(Y)MQ-P
3. Service Space
RX(Y)MQ4PVE/RX(Y)MQ5PVE/RX(Y)MQ6PVE
3D045696D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 219/308
EDMT34-635A Service Space
RX(Y)MQ-P 213
12
3D045696D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 220/308
Piping Diagrams EDMT34-635A
214 RX(Y)MQ-P
4. Piping Diagrams
RX(Y)MQ4PVE/RX(Y)MQ5PVE/RX(Y)MQ6PVE
3 D
0 5 2 6 2 8 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 221/308
EDMT34-635A Wiring Diagrams
RX(Y)MQ-P 215
12
5. Wiring Diagrams
5.1 Heat Pump
RXYMQ4PVE/RXYMQ5PVE/RXYMQ6PVE
C :
3 D 0 5 1 7
3 0 D
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 222/308
Wiring Diagrams EDMT34-635A
216 RX(Y)MQ-P
5.2 Cooling Only
RXMQ4PVE/RXMQ5PVE/RXMQ6PVE
C
: 3 D 0 5 1 7 3 1 C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 223/308
EDMT34-635A Field Wiring
RX(Y)MQ-P 217
12
6. Field Wiring
RX(Y)MQ4PVE/RX(Y)MQ5PVE/RX(Y)MQ6PVE
3
D 0 5 2 5 9 7 A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 224/308
Electric Characteristics EDMT34-635A
218 RX(Y)MQ-P
7. Electric Characteristics
RX(Y)MQ4PVE/RX(Y)MQ5PVE/RX(Y)MQ6PVE
C: 3D052771C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 225/308
EDMT34-635A Safety Devices Setting
RX(Y)MQ-P 219
12
8. Safety Devices SettingSafety Devices RX(Y)MQ4PVE RX(Y)MQ5PVE RX(Y)MQ6PVE
Printed circuit board fuse A1P F4U 250V, 6.3A
F6U 250V, 5.0A
A3P F1U 250V, 6.3A
High pressure switch OFF: 4.0 MPa
ON: 3.0±0.15MPaOverload protector M1C 23.8A
M1F 1.65A
M2F 1.65A
Fusible plug 70°C~75°C
+ 0
– 0.15
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 226/308
Capacity Tables EDMT34-635A
220 RX(Y)MQ-P
9. Capacity Tables9.1 Cooling Capacity
RX(Y)MQ4PVE [50/60Hz] Cooling capacity
Combina-
tion (%)(Capacityindex)
Out-door
airtemp.
Indoor air temp. (°CWB)Combina-
tion (%)(Capacityindex)
Out-door
airtemp.
Indoor air temp. (°CWB)
14.0 16.0 18.0 19.0 20.0 22.0 24.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0
TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI
°CDB kW kW kW kW kW kW kW kW kW kW kW kW kW kW °CDB kW kW kW kW kW kW kW kW kW kW kW kW kW kW
130%(130)
10.0 9.83 1.36 11.7 1.66 13.6 1.98 14.6 2.14 15.5 2.30 16.6 2.39 16.9 2.27
80%(80)
10.0 6.05 0.81 7.21 0.97 8.38 1.14 8.96 1.22 9.54 1.31 10.7 1.50 11.9 1.69
12.0 9.83 1.38 11.7 1.69 13.6 2.02 14.6 2.18 15.5 2.34 16.4 2.37 16.7 2.33 12.0 6.05 0.82 7.21 0.98 8.38 1.16 8.96 1.25 9.54 1.34 10.7 1.53 11.9 1.72
14.0 9.83 1.41 11.7 1.73 13.6 2.05 14.6 2.22 15.5 2.38 16.1 2.44 16.5 2.46 14.0 6.05 0.83 7.21 1.00 8.38 1.18 8.96 1.27 9.54 1.36 10.7 1.56 11.9 1.75
16.0 9.83 1.44 11.7 1.76 13.6 2.09 14.6 2.29 15.5 2.53 15.9 2.57 16.3 2.59 16.0 6.05 0.85 7.21 1.02 8.38 1.20 8.96 1.29 9.54 1.39 10.7 1.59 11.9 1.79
18.0 9.83 1.46 11.7 1.80 13.6 2.23 14.6 2.47 15.4 2.68 15.7 2.70 16.1 2.72 18.0 6.05 0.86 7.21 1.04 8.38 1.22 8.96 1.32 9.54 1.42 10.7 1.62 11.9 1.82
20.0 9.83 1.49 11.7 1.91 13.6 2.40 14.6 2.66 15.2 2.81 15.5 2.83 15.9 2.86 20.0 6.05 0.88 7.21 1.06 8.38 1.25 8.96 1.34 9.54 1.44 10.7 1.68 11.9 1.95
21.0 9.83 1.54 11.7 1.98 13.6 2.48 14.6 2.76 15.0 2.88 15.4 2.90 15.8 2.92 21.0 6.05 0.89 7.21 1.07 8.38 1.26 8.96 1.36 9.54 1.47 10.7 1.74 11.9 2.02
23.0 9.83 1.64 11.7 2.12 13.6 2.67 14.6 2.96 14.8 3.01 15.2 3.03 15.5 3.06 23.0 6.05 0.90 7.21 1.09 8.38 1.32 8.96 1.45 9.54 1.58 10.7 1.86 11.9 2.17
25.0 9.83 1.76 11.7 2.27 13.6 2.86 14.4 3.13 14.6 3.14 15.0 3.17 15.3 3.19 25.0 6.05 0.93 7.21 1.16 8.38 1.41 8.96 1.55 9.54 1.69 10.7 1.99 11.9 2.32
27.0 9.83 1.88 11.7 2.43 13.6 3.06 14.2 3.26 14.4 3.27 14.8 3.30 15.1 3.33 27.0 6.05 0.99 7.21 1.23 8.38 1.50 8.96 1.65 9.54 1.80 10.7 2.13 11.9 2.48
29.0 9.83 2.00 11.7 2.60 13.6 3.27 14.0 3.39 14.2 3.40 14.5 3.43 14.9 3.46 29.0 6.05 1.05 7.21 1.31 8.38 1.60 8.96 1.76 9.54 1.92 10.7 2.27 11.9 2.65
31.0 9.83 2.14 11.7 2.78 13.6 3.50 13.8 3.52 14.0 3.54 14.3 3.57 14.7 3.60 31.0 6.05 1.12 7.21 1.40 8.38 1.71 8.96 1.87 9.54 2.05 10.7 2.42 11.9 2.83
33.0 9.83 2.28 11.7 2.96 13.4 3.64 13.6 3.65 13.8 3.67 14.1 3.70 14.5 3.73 33.0 6.05 1.19 7.21 1.48 8.38 1.82 8.96 2.00 9.54 2.18 10.7 2.59 11.9 3.02
35.0 9.83 2.43 11.7 3.16 13.2 3.77 13.4 3.79 13.6 3.80 13.9 3.84 14.3 3.87 35.0 6.05 1.26 7.21 1.58 8.38 1.93 8.96 2.13 9.54 2.33 10.7 2.76 11.9 3.22
37.0 9.83 2.59 11.7 3.37 13.0 3.90 13.2 3.92 13.3 3.94 13.7 3.97 14.0 4.01 37.0 6.05 1.33 7.21 1.67 8.38 2.06 8.96 2.26 9.54 2.48 10.7 2.94 11.9 3.44
39.0 9.83 2.75 11.7 3.59 12.8 4.03 13.0 4.05 13.1 4.07 13.5 4.11 13.8 4.15 39.0 6.05 1.41 7.21 1.78 8.38 2.19 8.96 2.41 9.54 2.64 10.7 3.13 11.9 3.67
120%(120)
10.0 9.07 1.24 10.8 1.52 12.6 1.80 13.4 1.95 14.3 2.10 16.1 2.39 16.6 2.36
70%(70)
10.0 5.29 0.71 6.31 0.84 7.33 0.98 7.84 1.06 8.35 1.13 9.37 1.29 10.4 1.45
12.0 9.07 1.26 10.8 1.54 12.6 1.84 13.4 1.99 14.3 2.14 16.1 2.43 16.4 2.34 12.0 5.29 0.72 6.31 0.86 7.33 1.00 7.84 1.08 8.35 1.15 9.37 1.31 10.4 1.4714.0 9.07 1.29 10.8 1.57 12.6 1.87 13.4 2.02 14.3 2.18 15.9 2.43 16.2 2.44 14.0 5.29 0.73 6.31 0.87 7.33 1.02 7.84 1.10 8.35 1.17 9.37 1.34 10.4 1.50
16.0 9.07 1.31 10.8 1.60 12.6 1.91 13.4 2.06 14.3 2.23 15.7 2.56 16.0 2.58 16.0 5.29 0.74 6.31 0.89 7.33 1.04 7.84 1.12 8.35 1.20 9.37 1.36 10.4 1.53
18.0 9.07 1.34 10.8 1.64 12.6 1.97 13.4 2.19 14.3 2.41 15.5 2.69 15.8 2.71 18.0 5.29 0.76 6.31 0.90 7.33 1.06 7.84 1.14 8.35 1.22 9.37 1.39 10.4 1.56
20.0 9.07 1.36 10.8 1.70 12.6 2.12 13.4 2.35 14.3 2.59 15.3 2.82 15.6 2.84 20.0 5.29 0.77 6.31 0.92 7.33 1.08 7.84 1.16 8.35 1.24 9.37 1.41 10.4 1.61
21.0 9.07 1.38 10.8 1.76 12.6 2.20 13.4 2.44 14.3 2.68 15.1 2.88 15.5 2.91 21.0 5.29 0.78 6.31 0.93 7.33 1.09 7.84 1.17 8.35 1.25 9.37 1.44 10.4 1.66
23.0 9.07 1.47 10.8 1.89 12.6 2.36 13.4 2.61 14.3 2.88 14.9 3.02 15.3 3.04 23.0 5.29 0.79 6.31 0.94 7.33 1.11 7.84 1.21 8.35 1.31 9.37 1.54 10.4 1.78
25.0 9.07 1.57 10.8 2.02 12.6 2.53 13.4 2.80 14.3 3.09 14.7 3.15 15.1 3.17 25.0 5.29 0.80 6.31 0.98 7.33 1.18 7.84 1.29 8.35 1.40 9.37 1.64 10.4 1.90
27.0 9.07 1.68 10.8 2.16 12.6 2.70 13.4 3.00 14.2 3.25 14.5 3.28 14.8 3.30 27.0 5.29 0.85 6.31 1.04 7.33 1.26 7.84 1.38 8.35 1.50 9.37 1.76 10.4 2.04
29.0 9.07 1.79 10.8 2.31 12.6 2.89 13.4 3.21 14.0 3.39 14.3 3.41 14.6 3.44 29.0 5.29 0.90 6.31 1.11 7.33 1.34 7.84 1.47 8.35 1.60 9.37 1.87 10.4 2.17
31.0 9.07 1.91 10.8 2.46 12.6 3.09 13.4 3.43 13.8 3.52 14.1 3.54 14.4 3.57 31.0 5.29 0.96 6.31 1.18 7.33 1.43 7.84 1.56 8.35 1.70 9.37 2.00 10.4 2.32
33.0 9.07 2.03 10.8 2.63 12.6 3.30 13.4 3.63 13.5 3.65 13.9 3.68 14.2 3.71 33.0 5.29 1.01 6.31 1.25 7.33 1.52 7.84 1.66 8.35 1.81 9.37 2.13 10.4 2.47
35.0 9.07 2.16 10.8 2.80 12.6 3.52 13.2 3.77 13.3 3.78 13.7 3.81 14.0 3.84 35.0 5.29 1.07 6.31 1.33 7.33 1.61 7.84 1.76 8.35 1.92 9.37 2.27 10.4 2.64
37.0 9.07 2.30 10.8 2.98 12.6 3.76 13.0 3.90 13.1 3.91 13.4 3.95 13.8 3.98 37.0 5.29 1.13 6.31 1.41 7.33 1.71 7.84 1.88 8.35 2.05 9.37 2.41 10.4 2.81
39.0 9.07 2.45 10.8 3.18 12.6 4.01 12.7 4.03 12.9 4.05 13.2 4.08 13.6 4.12 39.0 5.29 1.20 6.31 1.49 7.33 1.82 7.84 1.99 8.35 2.18 9.37 2.57 10.4 2.99
110%(110)
10.0 8.31 1.13 9.92 1.37 11.5 1.63 12.3 1.76 13.1 1.90 14.7 2.16 16.3 2.43
60%(60)
10.0 4.54 0.62 5.41 0.73 6.28 0.84 6.72 0.90 7.16 0.96 8.03 1.09 8.90 1.22
12.0 8.31 1.15 9.92 1.40 11.5 1.66 12.3 1.80 13.1 1.93 14.7 2.21 16.2 2.43 12.0 4.54 0.63 5.41 0.74 6.28 0.85 6.72 0.91 7.16 0.98 8.03 1.10 8.90 1.24
14.0 8.31 1.17 9.92 1.42 11.5 1.69 12.3 1.83 13.1 1.97 14.7 2.25 15.9 2.43 14.0 4.54 0.64 5.41 0.75 6.28 0.87 6.72 0.93 7.16 0.99 8.03 1.12 8.90 1.26
16.0 8.31 1.19 9.92 1.45 11.5 1.73 12.3 1.87 13.1 2.01 14.7 2.33 15.7 2.56 16.0 4.54 0.65 5.41 0.76 6.28 0.88 6.72 0.95 7.16 1.01 8.03 1.15 8.90 1.28
18.0 8.31 1.21 9.92 1.48 11.5 1.76 12.3 1.92 13.1 2.11 14.7 2.52 15.5 2.69 18.0 4.54 0.66 5.41 0.77 6.28 0.90 6.72 0.96 7.16 1.03 8.03 1.17 8.90 1.31
20.0 8.31 1.24 9.92 1.51 11.5 1.86 12.3 2.06 13.1 2.27 14.7 2.71 15.3 2.82 20.0 4.54 0.67 5.41 0.79 6.28 0.91 6.72 0.98 7.16 1.05 8.03 1.19 8.90 1.34
21.0 8.31 1.25 9.92 1.56 11.5 1.93 12.3 2.13 13.1 2.35 14.7 2.81 15.2 2.89 21.0 4.54 0.67 5.41 0.79 6.28 0.92 6.72 0.99 7.16 1.06 8.03 1.20 8.90 1.35
23.0 8.31 1.31 9.92 1.67 11.5 2.07 12.3 2.29 13.1 2.52 14.7 3.00 15.0 3.02 23.0 4.54 0.68 5.41 0.81 6.28 0.94 6.72 1.01 7.16 1.08 8.03 1.25 8.90 1.43
25.0 8.31 1.40 9.92 1.78 11.5 2.22 12.3 2.45 13.1 2.70 14.5 3.13 14.8 3.15 25.0 4.54 0.69 5.41 0.82 6.28 0.98 6.72 1.06 7.16 1.15 8.03 1.33 8.90 1.53
27.0 8.31 1.49 9.92 1.90 11.5 2.37 12.3 2.62 13.1 2.89 14.3 3.26 14.6 3.28 27.0 4.54 0.72 5.41 0.87 6.28 1.04 6.72 1.13 7.16 1.22 8.03 1.42 8.90 1.64
29.0 8.31 1.59 9.92 2.03 11.5 2.53 12.3 2.80 13.1 3.09 14.0 3.39 14.3 3.42 29.0 4.54 0.76 5.41 0.92 6.28 1.10 6.72 1.20 7.16 1.30 8.03 1.51 8.90 1.74
31.0 8.31 1.69 9.92 2.17 11.5 2.70 12.3 3.00 13.1 3.30 13.8 3.52 14.1 3.55 31.0 4.54 0.81 5.41 0.98 6.28 1.17 6.72 1.28 7.16 1.38 8.03 1.61 8.90 1.86
33.0 8.31 1.80 9.92 2.31 11.5 2.89 12.3 3.20 13.1 3.53 13.6 3.66 13.9 3.68 33.0 4.54 0.85 5.41 1.04 6.28 1.24 6.72 1.35 7.16 1.47 8.03 1.71 8.90 1.98
35.0 8.31 1.91 9.92 2.46 11.5 3.08 12.3 3.41 13.1 3.76 13.4 3.79 13.7 3.82 35.0 4.54 0.90 5.41 1.10 6.28 1.32 6.72 1.44 7.16 1.56 8.03 1.82 8.90 2.11
37.0 8.31 2.03 9.92 2.62 11.5 3.28 12.3 3.64 12.9 3.89 13.2 3.92 13.5 3.95 37.0 4.54 0.95 5.41 1.17 6.28 1.40 6.72 1.53 7.16 1.66 8.03 1.94 8.90 2.24
39.0 8.31 2.16 9.92 2.79 11.5 3.50 12.3 3.88 12.7 4.02 13.0 4.06 13.3 4.09 39.0 4.54 1.01 5.41 1.23 6.28 1.48 6.72 1.62 7.16 1.76 8.03 2.06 8.90 2.38
100%
(100)
10.0 7.56 1.02 9.02 1.23 10.5 1.46 11.2 1.58 11.9 1.70 13.4 1.94 14.8 2.18
50%
(50)
10.0 3.78 0.53 4.51 0.61 5.24 0.70 5.60 0.75 5.96 0.80 6.69 0.89 7.42 1.00
12.0 7.56 1.03 9.02 1.26 10.5 1.49 11.2 1.61 11.9 1.73 13.4 1.98 14.8 2.23 12.0 3.78 0.54 4.51 0.62 5.24 0.71 5.60 0.76 5.96 0.81 6.69 0.91 7.42 1.01
14.0 7.56 1.05 9.02 1.28 10.5 1.52 11.2 1.64 11.9 1.76 13.4 2.01 14.8 2.27 14.0 3.78 0.54 4.51 0.63 5.24 0.73 5.60 0.77 5.96 0.82 6.69 0.93 7.42 1.03
16.0 7.56 1.07 9.02 1.30 10.5 1.55 11.2 1.67 11.9 1.80 13.4 2.05 14.8 2.36 16.0 3.78 0.55 4.51 0.64 5.24 0.74 5.60 0.79 5.96 0.84 6.69 0.94 7.42 1.05
18.0 7.56 1.09 9.02 1.33 10.5 1.58 11.2 1.70 11.9 1.83 13.4 2.17 14.8 2.55 18.0 3.78 0.56 4.51 0.65 5.24 0.75 5.60 0.80 5.96 0.85 6.69 0.96 7.42 1.07
20.0 7.56 1.11 9.02 1.35 10.5 1.62 11.2 1.79 11.9 1.96 13.4 2.34 14.8 2.74 20.0 3.78 0.57 4.51 0.66 5.24 0.76 5.60 0.81 5.96 0.87 6.69 0.98 7.42 1.09
21.0 7.56 1.12 9.02 1.37 10.5 1.68 11.2 1.85 11.9 2.03 13.4 2.42 14.8 2.84 21.0 3.78 0.57 4.51 0.67 5.24 0.77 5.60 0.82 5.96 0.87 6.69 0.99 7.42 1.10
23.0 7.56 1.15 9.02 1.46 10.5 1.80 11.2 1.99 11.9 2.18 13.4 2.60 14.7 3.00 23.0 3.78 0.58 4.51 0.68 5.24 0.78 5.60 0.83 5.96 0.89 6.69 1.00 7.42 1.13
25.0 7.56 1.23 9.02 1.56 10.5 1.93 11.2 2.13 11.9 2.33 13.4 2.78 14.5 3.13 25.0 3.78 0.59 4.51 0.69 5.24 0.79 5.60 0.85 5.96 0.92 6.69 1.05 7.42 1.2027.0 7.56 1.31 9.02 1.66 10.5 2.06 11.2 2.27 11.9 2.50 13.4 2.98 14.3 3.26 27.0 3.78 0.60 4.51 0.71 5.24 0.84 5.60 0.91 5.96 0.98 6.69 1.12 7.42 1.28
29.0 7.56 1.40 9.02 1.77 10.5 2.20 11.2 2.43 11.9 2.67 13.4 3.19 14.1 3.39 29.0 3.78 0.63 4.51 0.76 5.24 0.89 5.60 0.96 5.96 1.04 6.69 1.19 7.42 1.36
31.0 7.56 1.49 9.02 1.89 10.5 2.35 11.2 2.59 11.9 2.85 13.4 3.41 13.9 3.53 31.0 3.78 0.67 4.51 0.80 5.24 0.94 5.60 1.02 5.96 1.10 6.69 1.27 7.42 1.45
33.0 7.56 1.58 9.02 2.01 10.5 2.50 11.2 2.77 11.9 3.04 13.4 3.63 13.6 3.66 33.0 3.78 0.71 4.51 0.85 5.24 1.00 5.60 1.08 5.96 1.17 6.69 1.35 7.42 1.54
35.0 7.56 1.68 9.02 2.14 10.5 2.67 11.2 2.95 11.9 3.25 13.2 3.76 13.4 3.79 35.0 3.78 0.75 4.51 0.90 5.24 1.06 5.60 1.15 5.96 1.24 6.69 1.43 7.42 1.64
37.0 7.56 1.78 9.02 2.28 10.5 2.84 11.2 3.14 11.9 3.46 12.9 3.90 13.2 3.92 37.0 3.78 0.79 4.51 0.95 5.24 1.12 5.60 1.21 5.96 1.31 6.69 1.52 7.42 1.74
39.0 7.56 1.89 9.02 2.43 10.5 3.03 11.2 3.35 11.9 3.69 12.7 4.03 13.0 4.06 39.0 3.78 0.83 4.51 1.00 5.24 1.19 5.60 1.29 5.96 1.39 6.69 1.61 7.42 1.85
90%(90)
10.0 6.80 0.91 8.11 1.10 9.42 1.30 10.1 1.40 10.7 1.50 12.0 1.72 13.4 1.93TC: Total capacity: kWPI: Power input: kW (Compressor+Outdoor fan motor)
12.0 6.80 0.93 8.11 1.12 9.42 1.32 10.1 1.42 10.7 1.53 12.0 1.75 13.4 1.97
14.0 6.80 0.94 8.11 1.14 9.42 1.34 10.1 1.45 10.7 1.56 12.0 1.78 13.4 2.01
16.0 6.80 0.96 8.11 1.16 9.42 1.37 10.1 1.48 10.7 1.59 12.0 1.82 13.4 2.05
18.0 6.80 0.98 8.11 1.18 9.42 1.40 10.1 1.51 10.7 1.62 12.0 1.85 13.4 2.16
20.0 6.80 0.99 8.11 1.20 9.42 1.42 10.1 1.54 10.7 1.68 12.0 1.99 13.4 2.33
21.0 6.80 1.00 8.11 1.21 9.42 1.45 10.1 1.59 10.7 1.74 12.0 2.06 13.4 2.41
23.0 6.80 1.02 8.11 1.26 9.42 1.55 10.1 1.70 10.7 1.87 12.0 2.21 13.4 2.59
25.0 6.80 1.08 8.11 1.35 9.42 1.66 10.1 1.82 10.7 2.00 12.0 2.37 13.4 2.77
27.0 6.80 1.15 8.11 1.44 9.42 1.77 10.1 1.95 10.7 2.14 12.0 2.54 13.4 2.97
29.0 6.80 1.22 8.11 1.53 9.42 1.89 10.1 2.08 10.7 2.28 12.0 2.71 13.4 3.18
31.0 6.80 1.30 8.11 1.63 9.42 2.01 10.1 2.22 10.7 2.43 12.0 2.90 13.4 3.40
33.0 6.80 1.38 8.11 1.74 9.42 2.15 10.1 2.37 10.7 2.60 12.0 3.09 13.4 3.63
35.0 6.80 1.46 8.11 1.85 9.42 2.28 10.1 2.52 10.7 2.77 12.0 3.30 13.2 3.76
37.0 6.80 1.55 8.11 1.97 9.42 2.43 10.1 2.68 10.7 2.95 12.0 3.52 12.9 3.90
39.0 6.80 1.65 8.11 2.09 9.42 2.59 10.1 2.86 10.7 3.14 12.0 3.75 12.7 4.03
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 227/308
EDMT34-635A Capacity Tables
RX(Y)MQ-P 221
12
RX(Y)MQ5PVE [50/60Hz] Cooling capacity
Combina-tion (%)
(Capacityindex)
Out-doorair
temp.
Indoor air temp. (°CWB)Combina-tion (%)
(Capacityindex)
Out-doorair
temp.
Indoor air temp. (°CWB)
14.0 16.0 18.0 19.0 20.0 22.0 24.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0
TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI
°CDB kW kW kW kW kW kW kW kW kW kW kW kW kW kW °CDB kW kW kW kW kW kW kW kW kW kW kW kW kW kW
130%(162.5)
10.0 12.3 1.83 14.6 2.24 17.0 2.66 18.2 2.88 19.1 3.02 19.6 2.89 20.0 2.76
80%(100)
10.0 7.56 1.09 9.02 1.30 10.5 1.53 11.2 1.65 11.9 1.77 13.4 2.02 14.8 2.27
12.0 12.3 1.86 14.6 2.28 17.0 2.71 18.2 2.93 18.9 3.00 19.3 2.87 19.8 2.82 12.0 7.56 1.10 9.02 1.32 10.5 1.56 11.2 1.68 11.9 1.80 13.4 2.05 14.8 2.31
14.0 12.3 1.90 14.6 2.32 17.0 2.76 18.2 2.99 18.6 2.98 19.1 2.96 19.5 2.98 14.0 7.56 1.12 9.02 1.35 10.5 1.59 11.2 1.71 11.9 1.83 13.4 2.09 14.8 2.36
16.0 12.3 1.93 14.6 2.37 17.0 2.82 18.2 3.08 18.4 3.09 18.8 3.12 19.3 3.14 16.0 7.56 1.14 9.02 1.37 10.5 1.61 11.2 1.74 11.9 1.87 13.4 2.13 14.8 2.40
18.0 12.3 1.97 14.6 2.42 17.0 3.00 17.9 3.23 18.1 3.25 18.6 3.28 19.0 3.30 18.0 7.56 1.16 9.02 1.40 10.5 1.65 11.2 1.77 11.9 1.91 13.4 2.18 14.8 2.45
20.0 12.3 2.01 14.6 2.57 17.0 3.23 17.7 3.39 17.9 3.41 18.3 3.44 18.8 3.46 20.0 7.56 1.18 9.02 1.42 10.5 1.68 11.2 1.81 11.9 1.94 13.4 2.26 14.8 2.62
21.0 12.3 2.07 14.6 2.67 17.0 3.34 17.5 3.47 17.8 3.48 18.2 3.52 18.7 3.55 21.0 7.56 1.19 9.02 1.44 10.5 1.69 11.2 1.83 11.9 1.98 13.4 2.34 14.8 2.72
23.0 12.3 2.21 14.6 2.86 17.0 3.59 17.3 3.63 17.5 3.64 18.0 3.68 18.4 3.71 23.0 7.56 1.21 9.02 1.46 10.5 1.78 11.2 1.95 11.9 2.12 13.4 2.50 14.8 2.91
25.0 12.3 2.37 14.6 3.06 16.8 3.77 17.1 3.79 17.3 3.80 17.7 3.84 18.2 3.87 25.0 7.56 1.25 9.02 1.56 10.5 1.90 11.2 2.08 11.9 2.27 13.4 2.68 14.8 3.12
27.0 12.3 2.53 14.6 3.27 16.6 3.93 16.8 3.94 17.0 3.96 17.5 4.00 17.9 4.04 27.0 7.56 1.33 9.02 1.66 10.5 2.02 11.2 2.22 11.9 2.42 13.4 2.86 14.8 3.34
29.0 12.3 2.70 14.6 3.50 16.3 4.08 16.6 4.10 16.8 4.12 17.2 4.16 17.7 4.20 29.0 7.56 1.42 9.02 1.77 10.5 2.16 11.2 2.37 11.9 2.59 13.4 3.06 14.8 3.57
31.0 12.3 2.88 14.6 3.74 16.1 4.24 16.3 4.26 16.5 4.28 17.0 4.33 17.4 4.37 31.0 7.56 1.51 9.02 1.88 10.5 2.30 11.2 2.52 11.9 2.76 13.4 3.26 14.8 3.81
33.0 12.3 3.07 14.6 3.99 15.8 4.40 16.1 4.43 16.3 4.45 16.7 4.49 17.2 4.53 33.0 7.56 1.60 9.02 2.00 10.5 2.45 11.2 2.69 11.9 2.94 13.4 3.48 14.8 4.07
35.0 12.3 3.27 14.6 4.25 15.6 4.56 15.8 4.59 16.0 4.61 16.5 4.66 16.9 4.70 35.0 7.56 1.69 9.02 2.12 10.5 2.60 11.2 2.86 11.9 3.13 13.4 3.71 14.8 4.34
37.0 12.3 3.48 14.6 4.54 15.3 4.73 15.6 4.75 15.8 4.77 16.2 4.82 16.7 4.87 37.0 7.56 1.80 9.02 2.25 10.5 2.77 11.2 3.04 11.9 3.33 13.4 3.95 14.8 4.63
39.0 12.3 3.70 14.6 4.84 15.1 4.89 15.3 4.91 15.5 4.94 16.0 4.99 16.4 5.04 39.0 7.56 1.90 9.02 2.39 10.5 2.94 11.2 3.24 11.9 3.55 13.4 4.21 14.7 4.84
120%(150)
10.0 11.3 1.67 13.5 2.04 15.7 2.43 16.8 2.62 17.9 2.82 19.3 2.98 19.7 2.86
70%(87.5)
10.0 6.61 0.96 7.89 1.13 9.16 1.32 9.80 1.42 10.4 1.52 11.7 1.73 13.0 1.95
12.0 11.3 1.70 13.5 2.08 15.7 2.47 16.8 2.67 17.9 2.87 19.0 2.96 19.4 2.84 12.0 6.61 0.97 7.89 1.15 9.16 1.35 9.80 1.45 10.4 1.55 11.7 1.76 13.0 1.98
14.0 11.3 1.73 13.5 2.12 15.7 2.52 16.8 2.72 17.9 2.93 18.8 2.94 19.2 2.96 14.0 6.61 0.99 7.89 1.17 9.16 1.37 9.80 1.47 10.4 1.58 11.7 1.80 13.0 2.02
16.0 11.3 1.77 13.5 2.16 15.7 2.57 16.8 2.78 17.9 3.01 18.5 3.10 18.9 3.12 16.0 6.61 1.00 7.89 1.19 9.16 1.40 9.80 1.50 10.4 1.61 11.7 1.83 13.0 2.06
18.0 11.3 1.80 13.5 2.20 15.7 2.66 16.8 2.94 17.9 3.23 18.3 3.26 18.7 3.28 18.0 6.61 1.02 7.89 1.21 9.16 1.42 9.80 1.53 10.4 1.64 11.7 1.87 13.0 2.10
20.0 11.3 1.83 13.5 2.29 15.7 2.86 16.8 3.16 17.6 3.39 18.0 3.41 18.4 3.44 20.0 6.61 1.03 7.89 1.24 9.16 1.45 9.80 1.56 10.4 1.67 11.7 1.90 13.0 2.16
21.0 11.3 1.85 13.5 2.37 15.7 2.96 16.8 3.28 17.5 3.47 17.9 3.49 18.3 3.52 21.0 6.61 1.04 7.89 1.25 9.16 1.46 9.80 1.57 10.4 1.69 11.7 1.93 13.0 2.24
23.0 11.3 1.98 13.5 2.54 15.7 3.17 16.8 3.52 17.2 3.62 17.7 3.65 18.1 3.68 23.0 6.61 1.06 7.89 1.27 9.16 1.49 9.80 1.63 10.4 1.77 11.7 2.07 13.0 2.4025.0 11.3 2.11 13.5 2.72 15.7 3.40 16.8 3.77 17.0 3.78 17.4 3.81 17.8 3.84 25.0 6.61 1.08 7.89 1.32 9.16 1.59 9.80 1.74 10.4 1.89 11.7 2.21 13.0 2.56
27.0 11.3 2.26 13.5 2.91 15.7 3.64 16.5 3.92 16.7 3.94 17.2 3.97 17.6 4.01 27.0 6.61 1.14 7.89 1.40 9.16 1.70 9.80 1.85 10.4 2.01 11.7 2.36 13.0 2.74
29.0 11.3 2.41 13.5 3.10 15.7 3.89 16.3 4.08 16.5 4.10 16.9 4.13 17.3 4.17 29.0 6.61 1.21 7.89 1.49 9.16 1.80 9.80 1.97 10.4 2.15 11.7 2.52 13.0 2.92
31.0 11.3 2.57 13.5 3.31 15.7 4.16 16.0 4.24 16.2 4.26 16.7 4.30 17.1 4.33 31.0 6.61 1.29 7.89 1.59 9.16 1.92 9.80 2.10 10.4 2.29 11.7 2.69 13.0 3.12
33.0 11.3 2.73 13.5 3.53 15.6 4.38 15.8 4.40 16.0 4.42 16.4 4.46 16.8 4.50 33.0 6.61 1.36 7.89 1.68 9.16 2.04 9.80 2.23 10.4 2.43 11.7 2.86 13.0 3.33
35.0 11.3 2.91 13.5 3.77 15.3 4.54 15.5 4.56 15.8 4.58 16.2 4.62 16.6 4.67 35.0 6.61 1.44 7.89 1.79 9.16 2.17 9.80 2.37 10.4 2.59 11.7 3.05 13.0 3.55
37.0 11.3 3.10 13.5 4.02 15.1 4.70 15.3 4.72 15.5 4.74 15.9 4.79 16.3 4.83 37.0 6.61 1.53 7.89 1.89 9.16 2.30 9.80 2.52 10.4 2.75 11.7 3.25 13.0 3.78
39.0 11.3 3.29 13.5 4.28 14.8 4.86 15.1 4.88 15.3 4.91 15.7 4.95 16.1 5.00 39.0 6.61 1.62 7.89 2.01 9.16 2.45 9.80 2.68 10.4 2.93 11.7 3.45 13.0 4.02
110%(137.5)
10.0 10.4 1.52 12.4 1.85 14.4 2.19 15.4 2.37 16.4 2.55 18.4 2.91 19.3 2.96
60%(75)
10.0 5.67 0.83 6.76 0.98 7.85 1.13 8.40 1.21 8.95 1.29 10.0 1.46 11.1 1.64
12.0 10.4 1.54 12.4 1.88 14.4 2.23 15.4 2.42 16.4 2.60 18.4 2.97 19.1 2.94 12.0 5.67 0.84 6.76 0.99 7.85 1.15 8.40 1.23 8.95 1.31 10.0 1.49 11.1 1.67
14.0 10.4 1.57 12.4 1.92 14.4 2.28 15.4 2.46 16.4 2.65 18.4 3.02 18.8 2.94 14.0 5.67 0.86 6.76 1.01 7.85 1.17 8.40 1.25 8.95 1.34 10.0 1.51 11.1 1.70
16.0 10.4 1.60 12.4 1.95 14.4 2.32 15.4 2.51 16.4 2.70 18.2 3.08 18.6 3.10 16.0 5.67 0.87 6.76 1.02 7.85 1.19 8.40 1.27 8.95 1.36 10.0 1.54 11.1 1.73
18.0 10.4 1.63 12.4 1.99 14.4 2.37 15.4 2.58 16.4 2.84 18.0 3.24 18.3 3.26 18.0 5.67 0.88 6.76 1.04 7.85 1.21 8.40 1.30 8.95 1.39 10.0 1.57 11.1 1.76
20.0 10.4 1.66 12.4 2.03 14.4 2.51 15.4 2.77 16.4 3.05 17.7 3.39 18.1 3.42 20.0 5.67 0.90 6.76 1.06 7.85 1.23 8.40 1.32 8.95 1.41 10.0 1.60 11.1 1.80
21.0 10.4 1.68 12.4 2.09 14.4 2.60 15.4 2.87 16.4 3.16 17.6 3.47 18.0 3.50 21.0 5.67 0.90 6.76 1.07 7.85 1.24 8.40 1.33 8.95 1.42 10.0 1.62 11.1 1.81
23.0 10.4 1.76 12.4 2.24 14.4 2.79 15.4 3.08 16.4 3.39 17.3 3.63 17.7 3.66 23.0 5.67 0.92 6.76 1.09 7.85 1.26 8.40 1.36 8.95 1.45 10.0 1.68 11.1 1.93
25.0 10.4 1.88 12.4 2.40 14.4 2.98 15.4 3.30 16.4 3.63 17.1 3.79 17.5 3.82 25.0 5.67 0.93 6.76 1.10 7.85 1.31 8.40 1.43 8.95 1.54 10.0 1.79 11.1 2.06
27.0 10.4 2.00 12.4 2.56 14.4 3.19 15.4 3.53 16.4 3.89 16.8 3.95 17.2 3.98 27.0 5.67 0.97 6.76 1.17 7.85 1.40 8.40 1.52 8.95 1.64 10.0 1.91 11.1 2.20
29.0 10.4 2.14 12.4 2.73 14.4 3.41 15.4 3.77 16.2 4.07 16.6 4.11 17.0 4.14 29.0 5.67 1.02 6.76 1.24 7.85 1.49 8.40 1.61 8.95 1.75 10.0 2.04 11.1 2.35
31.0 10.4 2.27 12.4 2.92 14.4 3.64 15.4 4.03 16.0 4.23 16.3 4.27 16.7 4.30 31.0 5.67 1.08 6.76 1.32 7.85 1.58 8.40 1.72 8.95 1.86 10.0 2.17 11.1 2.50
33.0 10.4 2.42 12.4 3.11 14.4 3.88 15.4 4.31 15.7 4.39 16.1 4.43 16.5 4.47 33.0 5.67 1.15 6.76 1.40 7.85 1.67 8.40 1.82 8.95 1.98 10.0 2.31 11.1 2.66
35.0 10.4 2.57 12.4 3.31 14.4 4.14 15.3 4.53 15.5 4.55 15.8 4.59 16.2 4.63 35.0 5.67 1.21 6.76 1.48 7.85 1.78 8.40 1.94 8.95 2.10 10.0 2.45 11.1 2.83
37.0 10.4 2.74 12.4 3.53 14.4 4.42 15.0 4.69 15.2 4.71 15.6 4.75 16.0 4.79 37.0 5.67 1.28 6.76 1.57 7.85 1.88 8.40 2.05 8.95 2.23 10.0 2.61 11.1 3.02
39.0 10.4 2.91 12.4 3.75 14.4 4.71 14.8 4.85 15.0 4.87 15.4 4.92 15.7 4.96 39.0 5.67 1.35 6.76 1.66 7.85 2.00 8.40 2.18 8.95 2.37 10.0 2.77 11.1 3.21
100%(125)
10.0 9.45 1.37 11.3 1.66 13.1 1.97 14.0 2.12 14.9 2.28 16.7 2.61 18.6 2.94
50%(62.5)
10.0 4.72 0.71 5.63 0.83 6.54 0.95 7.00 1.01 7.46 1.07 8.37 1.20 9.28 1.34
12.0 9.45 1.39 11.3 1.69 13.1 2.00 14.0 2.16 14.9 2.33 16.7 2.66 18.6 3.00 12.0 4.72 0.72 5.63 0.84 6.54 0.96 7.00 1.02 7.46 1.09 8.37 1.22 9.28 1.36
14.0 9.45 1.42 11.3 1.72 13.1 2.04 14.0 2.20 14.9 2.37 16.7 2.71 18.5 3.03 14.0 4.72 0.73 5.63 0.85 6.54 0.98 7.00 1.04 7.46 1.11 8.37 1.25 9.28 1.39
16.0 9.45 1.44 11.3 1.75 13.1 2.08 14.0 2.25 14.9 2.42 16.7 2.76 18.2 3.08 16.0 4.72 0.74 5.63 0.86 6.54 0.99 7.00 1.06 7.46 1.13 8.37 1.27 9.28 1.41
18.0 9.45 1.47 11.3 1.79 13.1 2.12 14.0 2.29 14.9 2.47 16.7 2.92 18.0 3.24 18.0 4.72 0.75 5.63 0.88 6.54 1.01 7.00 1.08 7.46 1.15 8.37 1.29 9.28 1.44
20.0 9.45 1.50 11.3 1.82 13.1 2.18 14.0 2.41 14.9 2.64 16.7 3.14 17.7 3.39 20.0 4.72 0.76 5.63 0.89 6.54 1.02 7.00 1.09 7.46 1.17 8.37 1.31 9.28 1.47
21.0 9.45 1.51 11.3 1.84 13.1 2.26 14.0 2.49 14.9 2.74 16.7 3.26 17.6 3.47 21.0 4.72 0.77 5.63 0.90 6.54 1.03 7.00 1.10 7.46 1.18 8.37 1.33 9.28 1.48
23.0 9.45 1.55 11.3 1.96 13.1 2.42 14.0 2.67 14.9 2.93 16.7 3.49 17.4 3.63 23.0 4.72 0.78 5.63 0.91 6.54 1.05 7.00 1.12 7.46 1.20 8.37 1.35 9.28 1.52
25.0 9.45 1.66 11.3 2.10 13.1 2.59 14.0 2.86 14.9 3.14 16.7 3.75 17.1 3.79 25.0 4.72 0.79 5.63 0.93 6.54 1.07 7.00 1.15 7.46 1.23 8.37 1.42 9.28 1.62
27.0 9.45 1.76 11.3 2.24 13.1 2.77 14.0 3.06 14.9 3.36 16.5 3.92 16.9 3.95 27.0 4.72 0.81 5.63 0.96 6.54 1.13 7.00 1.22 7.46 1.31 8.37 1.51 9.28 1.72
29.0 9.45 1.88 11.3 2.39 13.1 2.96 14.0 3.27 14.9 3.59 16.3 4.08 16.6 4.11 29.0 4.72 0.85 5.63 1.02 6.54 1.20 7.00 1.29 7.46 1.39 8.37 1.61 9.28 1.83
31.0 9.45 2.00 11.3 2.54 13.1 3.16 14.0 3.49 14.9 3.84 16.0 4.24 16.4 4.27 31.0 4.72 0.90 5.63 1.08 6.54 1.27 7.00 1.37 7.46 1.48 8.37 1.71 9.28 1.95
33.0 9.45 2.13 11.3 2.71 13.1 3.37 14.0 3.72 14.9 4.10 15.8 4.40 16.1 4.43 33.0 4.72 0.95 5.63 1.14 6.54 1.35 7.00 1.46 7.46 1.57 8.37 1.81 9.28 2.07
35.0 9.45 2.26 11.3 2.88 13.1 3.59 14.0 3.97 14.9 4.37 15.5 4.56 15.9 4.59 35.0 4.72 1.00 5.63 1.21 6.54 1.43 7.00 1.54 7.46 1.67 8.37 1.93 9.28 2.20
37.0 9.45 2.40 11.3 3.07 13.1 3.82 14.0 4.23 14.9 4.66 15.3 4.72 15.6 4.76 37.0 4.72 1.06 5.63 1.27 6.54 1.51 7.00 1.63 7.46 1.77 8.37 2.04 9.28 2.3439.0 9.45 2.55 11.3 3.27 13.1 4.07 14.0 4.51 14.7 4.84 15.0 4.88 15.4 4.92 39.0 4.72 1.12 5.63 1.35 6.54 1.60 7.00 1.73 7.46 1.87 8.37 2.17 9.28 2.49
90%(112.5)
10.0 8.50 1.22 10.1 1.48 11.8 1.74 12.6 1.88 13.4 2.02 15.1 2.31 16.7 2.60TC: Total capacity: kWPI: Power input: kW (Compressor+Outdoor fan motor)
12.0 8.50 1.25 10.1 1.50 11.8 1.78 12.6 1.92 13.4 2.06 15.1 2.35 16.7 2.65
14.0 8.50 1.27 10.1 1.53 11.8 1.81 12.6 1.95 13.4 2.10 15.1 2.40 16.7 2.70
16.0 8.50 1.29 10.1 1.56 11.8 1.84 12.6 1.99 13.4 2.14 15.1 2.45 16.7 2.76
18.0 8.50 1.31 10.1 1.59 11.8 1.88 12.6 2.03 13.4 2.18 15.1 2.49 16.7 2.91
20.0 8.50 1.34 10.1 1.62 11.8 1.92 12.6 2.07 13.4 2.26 15.1 2.68 16.7 3.13
21.0 8.50 1.35 10.1 1.63 11.8 1.95 12.6 2.14 13.4 2.34 15.1 2.78 16.7 3.25
23.0 8.50 1.37 10.1 1.70 11.8 2.09 12.6 2.29 13.4 2.51 15.1 2.98 16.7 3.48
25.0 8.50 1.45 10.1 1.82 11.8 2.23 12.6 2.45 13.4 2.69 15.1 3.19 16.7 3.73
27.0 8.50 1.54 10.1 1.94 11.8 2.38 12.6 2.62 13.4 2.87 15.1 3.41 16.5 3.92
29.0 8.50 1.64 10.1 2.07 11.8 2.54 12.6 2.80 13.4 3.07 15.1 3.65 16.3 4.08
31.0 8.50 1.74 10.1 2.20 11.8 2.71 12.6 2.99 13.4 3.28 15.1 3.90 16.0 4.24
33.0 8.50 1.85 10.1 2.34 11.8 2.89 12.6 3.18 13.4 3.49 15.1 4.16 15.8 4.40
35.0 8.50 1.97 10.1 2.49 11.8 3.07 12.6 3.39 13.4 3.72 15.1 4.44 15.5 4.56
37.0 8.50 2.09 10.1 2.65 11.8 3.27 12.6 3.61 13.4 3.97 15.0 4.69 15.3 4.72
39.0 8.50 2.21 10.1 2.81 11.8 3.48 12.6 3.85 13.4 4.23 14.7 4.85 15.0 4.88
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 228/308
Capacity Tables EDMT34-635A
222 RX(Y)MQ-P
RX(Y)MQ6PVE [50/60Hz] Cooling capacity
Combina-tion (%)
(Capacityindex)
Out-doorair
temp.
Indoor air temp. (°CWB)Combina-tion (%)
(Capacityindex)
Out-doorair
temp.
Indoor air temp. (°CWB)
14.0 16.0 18.0 19.0 20.0 22.0 24.0 14.0 16.0 18.0 19.0 20.0 22.0 24.0
TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI
°CDB kW kW kW kW kW kW kW kW kW kW kW kW kW kW °CDB kW kW kW kW kW kW kW kW kW kW kW kW kW kW
130%(182)
10.0 13.6 2.04 16.2 2.50 18.8 2.98 20.2 3.22 20.4 3.15 20.9 3.02 21.4 2.88
80%(112)
10.0 8.37 1.22 9.98 1.46 11.6 1.71 12.4 1.84 13.2 1.98 14.8 2.26 16.4 2.54
12.0 13.6 2.08 16.2 2.55 18.8 3.03 19.9 3.20 20.1 3.13 20.6 3.00 21.1 2.95 12.0 8.37 1.24 9.98 1.48 11.6 1.74 12.4 1.88 13.2 2.01 14.8 2.30 16.4 2.59
14.0 13.6 2.12 16.2 2.60 18.8 3.09 19.6 3.18 19.9 3.12 20.4 3.09 20.9 3.12 14.0 8.37 1.26 9.98 1.51 11.6 1.77 12.4 1.91 13.2 2.05 14.8 2.34 16.4 2.64
16.0 13.6 2.16 16.2 2.65 18.8 3.15 19.4 3.21 19.6 3.23 20.1 3.26 20.6 3.28 16.0 8.37 1.28 9.98 1.53 11.6 1.81 12.4 1.95 13.2 2.09 14.8 2.39 16.4 2.69
18.0 13.6 2.20 16.2 2.70 18.8 3.35 19.1 3.38 19.3 3.39 19.8 3.42 20.3 3.45 18.0 8.37 1.30 9.98 1.56 11.6 1.84 12.4 1.98 13.2 2.13 14.8 2.43 16.4 2.74
20.0 13.6 2.25 16.2 2.88 18.6 3.52 18.8 3.54 19.1 3.56 19.6 3.59 20.1 3.62 20.0 8.37 1.32 9.98 1.59 11.6 1.88 12.4 2.02 13.2 2.17 14.8 2.52 16.4 2.93
21.0 13.6 2.31 16.2 2.98 18.5 3.60 18.7 3.62 19.0 3.64 19.4 3.67 19.9 3.71 21.0 8.37 1.33 9.98 1.61 11.6 1.89 12.4 2.04 13.2 2.22 14.8 2.61 16.4 3.04
23.0 13.6 2.47 16.2 3.20 18.2 3.77 18.4 3.79 18.7 3.81 19.2 3.84 19.7 3.88 23.0 8.37 1.36 9.98 1.64 11.6 1.99 12.4 2.18 13.2 2.37 14.8 2.80 16.4 3.26
25.0 13.6 2.65 16.2 3.42 17.9 3.93 18.2 3.95 18.4 3.97 18.9 4.01 19.4 4.05 25.0 8.37 1.40 9.98 1.74 11.6 2.12 12.4 2.33 13.2 2.54 14.8 3.00 16.4 3.49
27.0 13.6 2.83 16.2 3.66 17.7 4.10 17.9 4.12 18.2 4.14 18.7 4.18 19.1 4.22 27.0 8.37 1.49 9.98 1.86 11.6 2.26 12.4 2.48 13.2 2.71 14.8 3.20 16.4 3.73
29.0 13.6 3.02 16.2 3.91 17.4 4.26 17.7 4.29 17.9 4.31 18.4 4.35 18.9 4.39 29.0 8.37 1.59 9.98 1.98 11.6 2.41 12.4 2.65 13.2 2.89 14.8 3.42 16.4 3.99
31.0 13.6 3.22 16.2 4.18 17.2 4.43 17.4 4.45 17.6 4.48 18.1 4.52 18.6 4.57 31.0 8.37 1.68 9.98 2.10 11.6 2.57 12.4 2.82 13.2 3.09 14.8 3.65 16.4 4.26
33.0 13.6 3.43 16.2 4.46 16.9 4.60 17.1 4.62 17.4 4.65 17.9 4.69 18.4 4.74 33.0 8.37 1.79 9.98 2.23 11.6 2.73 12.4 3.00 13.2 3.29 14.8 3.89 16.4 4.55
35.0 13.6 3.65 16.1 4.72 16.6 4.77 16.9 4.79 17.1 4.82 17.6 4.87 18.1 4.92 35.0 8.37 1.89 9.98 2.37 11.6 2.91 12.4 3.20 13.2 3.50 14.8 4.15 16.2 4.72
37.0 13.6 3.89 15.9 4.88 16.4 4.93 16.6 4.96 16.9 4.99 17.3 5.04 17.8 5.10 37.0 8.37 2.01 9.98 2.52 11.6 3.09 12.4 3.40 13.2 3.73 14.8 4.42 15.9 4.89
39.0 13.6 4.14 15.6 5.05 16.1 5.10 16.3 5.13 16.6 5.16 17.1 5.22 17.6 5.27 39.0 8.37 2.13 9.98 2.68 11.6 3.29 12.4 3.62 13.2 3.97 14.8 4.71 15.7 5.05
120%(168)
10.0 12.6 1.87 15.0 2.28 17.4 2.71 18.6 2.93 19.8 3.15 20.5 3.11 21.0 2.99
70%(98)
10.0 7.32 1.07 8.73 1.27 10.1 1.48 10.9 1.59 11.6 1.70 13.0 1.94 14.4 2.18
12.0 12.6 1.90 15.0 2.32 17.4 2.76 18.6 2.99 19.8 3.21 20.3 3.09 20.7 2.97 12.0 7.32 1.09 8.73 1.29 10.1 1.51 10.9 1.62 11.6 1.73 13.0 1.97 14.4 2.22
14.0 12.6 1.94 15.0 2.37 17.4 2.82 18.6 3.05 19.6 3.20 20.0 3.07 20.5 3.09 14.0 7.32 1.10 8.73 1.31 10.1 1.53 10.9 1.65 11.6 1.77 13.0 2.01 14.4 2.26
16.0 12.6 1.97 15.0 2.41 17.4 2.87 18.6 3.10 19.3 3.21 19.8 3.23 20.2 3.26 16.0 7.32 1.12 8.73 1.33 10.1 1.56 10.9 1.68 11.6 1.80 13.0 2.05 14.4 2.30
18.0 12.6 2.01 15.0 2.46 17.4 2.97 18.6 3.29 19.0 3.37 19.5 3.40 19.9 3.43 18.0 7.32 1.14 8.73 1.36 10.1 1.59 10.9 1.71 11.6 1.83 13.0 2.09 14.4 2.35
20.0 12.6 2.05 15.0 2.56 17.4 3.19 18.6 3.52 18.8 3.54 19.2 3.57 19.7 3.60 20.0 7.32 1.16 8.73 1.38 10.1 1.62 10.9 1.74 11.6 1.87 13.0 2.13 14.4 2.42
21.0 12.6 2.07 15.0 2.65 17.4 3.31 18.4 3.60 18.6 3.62 19.1 3.65 19.6 3.68 21.0 7.32 1.17 8.73 1.39 10.1 1.63 10.9 1.76 11.6 1.89 13.0 2.16 14.4 2.50
23.0 12.6 2.21 15.0 2.84 17.4 3.55 18.2 3.77 18.4 3.78 18.8 3.82 19.3 3.85 23.0 7.32 1.19 8.73 1.42 10.1 1.67 10.9 1.82 11.6 1.98 13.0 2.31 14.4 2.6825.0 12.6 2.37 15.0 3.04 17.4 3.80 17.9 3.93 18.1 3.95 18.6 3.98 19.0 4.02 25.0 7.32 1.21 8.73 1.48 10.1 1.78 10.9 1.94 11.6 2.11 13.0 2.47 14.4 2.87
27.0 12.6 2.53 15.0 3.25 17.4 4.07 17.6 4.09 17.9 4.11 18.3 4.15 18.8 4.19 27.0 7.32 1.28 8.73 1.57 10.1 1.90 10.9 2.07 11.6 2.25 13.0 2.64 14.4 3.06
29.0 12.6 2.69 15.0 3.47 17.1 4.24 17.4 4.26 17.6 4.28 18.0 4.32 18.5 4.36 29.0 7.32 1.36 8.73 1.67 10.1 2.02 10.9 2.21 11.6 2.40 13.0 2.82 14.4 3.27
31.0 12.6 2.87 15.0 3.71 16.9 4.41 17.1 4.43 17.3 4.45 17.8 4.49 18.2 4.53 31.0 7.32 1.44 8.73 1.77 10.1 2.15 10.9 2.35 11.6 2.56 13.0 3.01 14.4 3.49
33.0 12.6 3.06 15.0 3.95 16.6 4.57 16.8 4.59 17.1 4.62 17.5 4.66 18.0 4.71 33.0 7.32 1.52 8.73 1.88 10.1 2.28 10.9 2.50 11.6 2.72 13.0 3.20 14.4 3.72
35.0 12.6 3.25 15.0 4.21 16.4 4.74 16.6 4.76 16.8 4.79 17.3 4.83 17.7 4.88 35.0 7.32 1.61 8.73 2.00 10.1 2.43 10.9 2.66 11.6 2.90 13.0 3.41 14.4 3.97
37.0 12.6 3.46 15.0 4.49 16.1 4.91 16.3 4.93 16.5 4.95 17.0 5.00 17.5 5.05 37.0 7.32 1.71 8.73 2.12 10.1 2.58 10.9 2.82 11.6 3.08 13.0 3.63 14.4 4.23
39.0 12.6 3.68 15.0 4.78 15.8 5.07 16.1 5.10 16.3 5.13 16.7 5.18 17.2 5.23 39.0 7.32 1.81 8.73 2.25 10.1 2.74 10.9 3.00 11.6 3.27 13.0 3.86 14.4 4.50
110%(154)
10.0 11.5 1.70 13.7 2.07 15.9 2.45 17.1 2.65 18.2 2.85 20.2 3.21 20.6 3.09
60%(84)
10.0 6.28 0.93 7.49 1.09 8.70 1.26 9.30 1.35 9.90 1.44 11.1 1.63 12.3 1.83
12.0 11.5 1.73 13.7 2.10 15.9 2.50 17.1 2.70 18.2 2.91 19.9 3.19 20.3 3.07 12.0 6.28 0.94 7.49 1.11 8.70 1.28 9.30 1.38 9.90 1.47 11.1 1.66 12.3 1.86
14.0 11.5 1.76 13.7 2.14 15.9 2.55 17.1 2.75 18.2 2.96 19.7 3.17 20.1 3.07 14.0 6.28 0.96 7.49 1.13 8.70 1.31 9.30 1.40 9.90 1.49 11.1 1.69 12.3 1.90
16.0 11.5 1.79 13.7 2.18 15.9 2.60 17.1 2.81 18.2 3.02 19.4 3.21 19.8 3.24 16.0 6.28 0.97 7.49 1.14 8.70 1.33 9.30 1.42 9.90 1.52 11.1 1.72 12.3 1.93
18.0 11.5 1.83 13.7 2.23 15.9 2.65 17.1 2.88 18.2 3.17 19.1 3.38 19.6 3.40 18.0 6.28 0.99 7.49 1.16 8.70 1.35 9.30 1.45 9.90 1.55 11.1 1.76 12.3 1.97
20.0 11.5 1.86 13.7 2.27 15.9 2.81 17.1 3.10 18.2 3.41 18.9 3.54 19.3 3.57 20.0 6.28 1.00 7.49 1.18 8.70 1.38 9.30 1.48 9.90 1.58 11.1 1.79 12.3 2.01
21.0 11.5 1.88 13.7 2.34 15.9 2.91 17.1 3.21 18.2 3.53 18.8 3.62 19.2 3.65 21.0 6.28 1.01 7.49 1.19 8.70 1.39 9.30 1.49 9.90 1.59 11.1 1.81 12.3 2.03
23.0 11.5 1.97 13.7 2.51 15.9 3.12 17.1 3.44 18.1 3.76 18.5 3.79 18.9 3.82 23.0 6.28 1.03 7.49 1.21 8.70 1.41 9.30 1.52 9.90 1.62 11.1 1.88 12.3 2.16
25.0 11.5 2.10 13.7 2.68 15.9 3.34 17.1 3.69 17.8 3.92 18.2 3.96 18.6 3.99 25.0 6.28 1.04 7.49 1.24 8.70 1.47 9.30 1.59 9.90 1.73 11.1 2.00 12.3 2.31
27.0 11.5 2.24 13.7 2.86 15.9 3.57 17.1 3.95 17.6 4.09 18.0 4.12 18.4 4.16 27.0 6.28 1.08 7.49 1.31 8.70 1.56 9.30 1.70 9.90 1.84 11.1 2.14 12.3 2.46
29.0 11.5 2.39 13.7 3.06 15.9 3.81 17.1 4.22 17.3 4.25 17.7 4.29 18.1 4.33 29.0 6.28 1.15 7.49 1.39 8.70 1.66 9.30 1.81 9.90 1.96 11.1 2.28 12.3 2.62
31.0 11.5 2.54 13.7 3.26 15.9 4.07 16.8 4.40 17.0 4.42 17.4 4.46 17.9 4.50 31.0 6.28 1.21 7.49 1.47 8.70 1.76 9.30 1.92 9.90 2.08 11.1 2.43 12.3 2.80
33.0 11.5 2.71 13.7 3.48 15.9 4.34 16.6 4.57 16.8 4.59 17.2 4.63 17.6 4.67 33.0 6.28 1.28 7.49 1.56 8.70 1.87 9.30 2.04 9.90 2.21 11.1 2.58 12.3 2.98
35.0 11.5 2.88 13.7 3.70 15.9 4.63 16.3 4.73 16.5 4.75 16.9 4.80 17.3 4.84 35.0 6.28 1.36 7.49 1.66 8.70 1.99 9.30 2.16 9.90 2.35 11.1 2.74 12.3 3.17
37.0 11.5 3.06 13.7 3.94 15.8 4.88 16.0 4.90 16.2 4.92 16.7 4.97 17.1 5.01 37.0 6.28 1.43 7.49 1.75 8.70 2.11 9.30 2.30 9.90 2.50 11.1 2.92 12.3 3.37
39.0 11.5 3.25 13.7 4.20 15.6 5.04 15.8 5.07 16.0 5.09 16.4 5.14 16.8 5.19 39.0 6.28 1.51 7.49 1.86 8.70 2.23 9.30 2.44 9.90 2.65 11.1 3.10 12.3 3.59
100%(140)
10.0 10.5 1.53 12.5 1.86 14.5 2.20 15.5 2.37 16.5 2.55 18.5 2.92 20.2 3.20
50%(70)
10.0 5.23 0.80 6.24 0.92 7.25 1.06 7.75 1.13 8.25 1.20 9.26 1.35 10.3 1.50
12.0 10.5 1.56 12.5 1.89 14.5 2.24 15.5 2.42 16.5 2.60 18.5 2.97 20.0 3.18 12.0 5.23 0.81 6.24 0.94 7.25 1.07 7.75 1.15 8.25 1.22 9.26 1.37 10.3 1.53
14.0 10.5 1.58 12.5 1.92 14.5 2.28 15.5 2.47 16.5 2.65 18.5 3.03 19.7 3.16 14.0 5.23 0.82 6.24 0.95 7.25 1.09 7.75 1.16 8.25 1.24 9.26 1.39 10.3 1.55
16.0 10.5 1.61 12.5 1.96 14.5 2.33 15.5 2.51 16.5 2.70 18.5 3.09 19.4 3.22 16.0 5.23 0.83 6.24 0.97 7.25 1.11 7.75 1.18 8.25 1.26 9.26 1.42 10.3 1.58
18.0 10.5 1.64 12.5 2.00 14.5 2.37 15.5 2.56 16.5 2.76 18.5 3.27 19.2 3.38 18.0 5.23 0.84 6.24 0.98 7.25 1.13 7.75 1.20 8.25 1.28 9.26 1.44 10.3 1.61
20.0 10.5 1.67 12.5 2.04 14.5 2.44 15.5 2.69 16.5 2.95 18.5 3.51 18.9 3.54 20.0 5.23 0.85 6.24 1.00 7.25 1.15 7.75 1.22 8.25 1.30 9.26 1.47 10.3 1.64
21.0 10.5 1.69 12.5 2.06 14.5 2.53 15.5 2.79 16.5 3.06 18.4 3.60 18.8 3.63 21.0 5.23 0.86 6.24 1.00 7.25 1.16 7.75 1.23 8.25 1.32 9.26 1.48 10.3 1.66
23.0 10.5 1.74 12.5 2.19 14.5 2.71 15.5 2.99 16.5 3.28 18.1 3.76 18.5 3.79 23.0 5.23 0.87 6.24 1.02 7.25 1.18 7.75 1.26 8.25 1.34 9.26 1.51 10.3 1.69
25.0 10.5 1.85 12.5 2.35 14.5 2.90 15.5 3.20 16.5 3.51 17.9 3.93 18.3 3.96 25.0 5.23 0.89 6.24 1.04 7.25 1.20 7.75 1.28 8.25 1.38 9.26 1.59 10.3 1.81
27.0 10.5 1.97 12.5 2.50 14.5 3.10 15.5 3.42 16.5 3.76 17.6 4.09 18.0 4.13 27.0 5.23 0.90 6.24 1.07 7.25 1.26 7.75 1.36 8.25 1.47 9.26 1.69 10.3 1.93
29.0 10.5 2.10 12.5 2.67 14.5 3.31 15.5 3.66 16.5 4.02 17.4 4.26 17.7 4.29 29.0 5.23 0.95 6.24 1.14 7.25 1.34 7.75 1.45 8.25 1.56 9.26 1.80 10.3 2.05
31.0 10.5 2.24 12.5 2.85 14.5 3.53 15.5 3.90 16.5 4.29 17.1 4.43 17.5 4.46 31.0 5.23 1.01 6.24 1.20 7.25 1.42 7.75 1.54 8.25 1.66 9.26 1.91 10.3 2.18
33.0 10.5 2.38 12.5 3.03 14.5 3.77 15.5 4.16 16.5 4.56 16.8 4.59 17.2 4.63 33.0 5.23 1.06 6.24 1.27 7.25 1.51 7.75 1.63 8.25 1.76 9.26 2.03 10.3 2.32
35.0 10.5 2.53 12.5 3.23 14.5 4.01 15.5 4.44 16.2 4.72 16.6 4.76 16.9 4.80 35.0 5.23 1.12 6.24 1.35 7.25 1.59 7.75 1.73 8.25 1.86 9.26 2.15 10.3 2.47
37.0 10.5 2.68 12.5 3.43 14.5 4.28 15.5 4.73 15.9 4.89 16.3 4.93 16.7 4.97 37.0 5.23 1.18 6.24 1.42 7.25 1.69 7.75 1.83 8.25 1.97 9.26 2.28 10.3 2.6239.0 10.5 2.85 12.5 3.65 14.5 4.55 15.5 5.03 15.7 5.05 16.0 5.10 16.4 5.14 39.0 5.23 1.25 6.24 1.50 7.25 1.79 7.75 1.94 8.25 2.09 9.26 2.42 10.3 2.78
90%(126)
10.0 9.4 1.37 11.2 1.65 13.0 1.95 14.0 2.10 14.9 2.26 16.7 2.58 18.5 2.91TC: Total capacity: kWPI: Power input: kW (Compressor+Outdoor fan motor)
12.0 9.4 1.39 11.2 1.68 13.0 1.99 14.0 2.14 14.9 2.30 16.7 2.63 18.5 2.97
14.0 9.4 1.42 11.2 1.71 13.0 2.02 14.0 2.18 14.9 2.35 16.7 2.68 18.5 3.02
16.0 9.4 1.44 11.2 1.74 13.0 2.06 14.0 2.23 14.9 2.39 16.7 2.74 18.5 3.08
18.0 9.4 1.47 11.2 1.78 13.0 2.10 14.0 2.27 14.9 2.44 16.7 2.79 18.5 3.26
20.0 9.4 1.49 11.2 1.81 13.0 2.14 14.0 2.32 14.9 2.53 16.7 3.00 18.5 3.50
21.0 9.4 1.51 11.2 1.83 13.0 2.18 14.0 2.40 14.9 2.62 16.7 3.11 18.4 3.60
23.0 9.4 1.54 11.2 1.90 13.0 2.33 14.0 2.57 14.9 2.81 16.7 3.33 18.1 3.76
25.0 9.4 1.62 11.2 2.03 13.0 2.50 14.0 2.74 14.9 3.01 16.7 3.57 17.9 3.93
27.0 9.4 1.72 11.2 2.17 13.0 2.66 14.0 2.93 14.9 3.21 16.7 3.82 17.6 4.09
29.0 9.4 1.83 11.2 2.31 13.0 2.84 14.0 3.13 14.9 3.43 16.7 4.08 17.3 4.26
31.0 9.4 1.95 11.2 2.46 13.0 3.03 14.0 3.34 14.9 3.66 16.7 4.36 17.1 4.42
33.0 9.4 2.07 11.2 2.62 13.0 3.23 14.0 3.56 14.9 3.91 16.5 4.56 16.8 4.59
35.0 9.4 2.20 11.2 2.78 13.0 3.44 14.0 3.79 14.9 4.17 16.2 4.72 16.6 4.76
37.0 9.4 2.33 11.2 2.96 13.0 3.66 14.0 4.04 14.9 4.44 16.0 4.89 16.3 4.93
39.0 9.4 2.48 11.2 3.14 13.0 3.90 14.0 4.30 14.9 4.73 15.7 5.06 16.0 5.10
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 229/308
EDMT34-635A Capacity Tables
RX(Y)MQ-P 223
12
9.2 Heating Capacity
RXYMQ4PVE [50/60Hz] Heating capacityCombina-tion (%)
(Capacityindex)
Outdoorair temp.
Indoor air temp. (°CDB) Combina-tion (%)
(Capacityindex)
Outdoorair temp.
Indoor air temp. (°CDB)16.0 18.0 20.0 21.0 22.0 24.0 16.0 18.0 20.0 21.0 22.0 24.0
TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI°CDB °CWB kW kW kW kW kW kW kW kW kW kW kW kW °CDB °CWB kW kW kW kW kW kW kW kW kW kW kW kW
130%(130)
-19.8 -20.0 10.2 3.89 10.2 4.05 10.1 4.20 10.1 4.28 10.1 4.36 10.1 4.52
80%(80)
-19.8 -20.0 9.99 4.95 9.97 5.05 9.96 5.14 9.68 4.96 9.36 4.75 8.71 4.34-18.8 -19.0 10.5 3.97 10.5 4.13 10.4 4.28 10.4 4.36 10.4 4.43 10.4 4.58 -18.8 -19.0 10.3 5.00 10.3 5.10 10.0 4.98 9.68 4.77 9.36 4.57 8.71 4.18
-16.7 -17.0 11.1 4.13 11.1 4.28 11.0 4.42 11.0 4.49 11.0 4.56 11.0 4.71 -16.7 -17.0 10.9 5.10 10.6 5.00 10.0 4.61 9.68 4.43 9.36 4.24 8.71 3.88-14.7 -15.0 11.7 4.27 11.7 4.41 11.7 4.54 11.6 4.61 11.6 4.68 11.6 4.82 -14.7 -15.0 11.3 5.02 10.6 4.65 10.0 4.30 9.68 4.13 9.36 3.96 8.71 3.62-12.6 -13.0 12.3 4.40 12.3 4.53 12.3 4.66 12.3 4.72 12.2 4.79 12.2 4.92 -12.6 -13.0 11.3 4.69 10.6 4.35 10.0 4.03 9.68 3.87 9.36 3.71 8.71 3.40-10.5 -11.0 12.9 4.51 12.9 4.64 12.9 4.76 12.9 4.82 12.8 4.88 12.8 5.01 -10.5 -11.0 11.3 4.40 10.6 4.09 10.0 3.78 9.68 3.64 9.36 3.49 8.71 3.20-9.5 -10.0 13.2 4.57 13.2 4.69 13.2 4.81 13.2 4.87 13.2 4.93 13.1 5.05 -9.5 -10.0 11.3 4.27 10.6 3.97 10.0 3.68 9.68 3.53 9.36 3.39 8.71 3.11-8.5 -9.1 13.5 4.61 13.5 4.73 13.5 4.85 13.4 4.91 13.4 4.97 13.4 5.08 -8.5 -9.1 11.3 4.16 10.6 3.87 10.0 3.58 9.68 3.44 9.36 3.31 8.71 3.04-7.0 -7.6 14.0 4.69 13.9 4.80 13.9 4.91 13.9 4.97 13.9 5.03 13.9 5.14 -7.0 -7.6 11.3 3.99 10.6 3.71 10.0 3.44 9.68 3.30 9.36 3.17 8.71 2.92-5.0 -5.6 14.6 4.78 14.6 4.89 14.5 5.00 14.5 5.05 14.5 5.10 14.2 5.03 -5.0 -5.6 11.3 3.78 10.6 3.51 10.0 3.26 9.68 3.14 9.36 3.01 8.71 2.77-3.0 -3.7 15.2 4.86 15.1 4.96 15.1 5.07 15.1 5.12 15.1 5.17 14.2 4.78 -3.0 -3.7 11.3 3.60 10.6 3.35 10.0 3.11 9.68 2.99 9.36 2.88 8.71 2.650.0 -0.7 16.1 4.97 16.1 5.07 16.0 5.17 15.7 5.07 15.2 4.85 14.2 4.43 0.0 -0.7 11.3 3.35 10.6 3.12 10.0 2.90 9.68 2.79 9.36 2.69 8.71 2.483.0 2.2 17.0 5.07 16.9 5.16 16.3 4.93 15.7 4.72 15.2 4.52 14.2 4.13 3.0 2.2 11.3 3.14 10.6 2.93 10.0 2.72 9.68 2.62 9.36 2.52 8.71 2.335.0 4.1 17.6 5.13 17.3 5.11 16.3 4.71 15.7 4.52 15.2 4.33 14.2 3.96 5.0 4.1 11.3 3.01 10.6 2.81 10.0 2.62 9.68 2.52 9.36 2.43 8.71 2.257.0 6.0 18.1 5.19 17.3 4.90 16.3 4.52 15.7 4.34 15.2 4.16 14.2 3.80 7.0 6.0 11.3 2.90 10.6 2.71 10.0 2.52 9.68 2.43 9.36 2.34 8.71 2.179.0 7.9 18.3 5.07 17.3 4.70 16.3 4.34 15.7 4.17 15.2 3.99 14.2 3.66 9.0 7.9 11.3 2.79 10.6 2.61 10.0 2.43 9.68 2.35 9.36 2.26 8.71 2.0911.0 9.8 18.3 4.87 17.3 4.52 16.3 4.18 15.7 4.01 15.2 3.84 14.2 3.52 11.0 9.8 11.3 2.70 10.6 2.52 10.0 2.35 9.68 2.27 9.36 2.19 8.71 2.0213.0 11.8 18.3 4.68 17.3 4.34 16.3 4.02 15.7 3.86 15.2 3.70 14.2 3.39 13.0 11.8 11.3 2.60 10.6 2.44 10.0 2.27 9.68 2.19 9.36 2.11 8.71 1.9615.0 13.7 18.3 4.51 17.3 4.19 16.3 3.87 15.7 3.72 15.2 3.57 14.2 3.28 15.0 13.7 11.3 2.52 10.6 2.36 10.0 2.20 9.68 2.12 9.36 2.05 8.71 1.90
120%(120)
-19.8 -20.0 10.1 4.10 10.1 4.25 10.1 4.39 10.1 4.46 10.1 4.54 10.0 4.68
70%(70)
-19.8 -20.0 9.87 5.10 9.31 4.72 8.75 4.36 8.47 4.19 8.19 4.01 7.63 3.68-18.8 -19.0 10.5 4.18 10.4 4.32 10.4 4.46 10.4 4.53 10.4 4.60 10.3 4.74 -18.8 -19.0 9.87 4.90 9.31 4.54 8.75 4.20 8.47 4.03 8.19 3.86 7.63 3.54-16.7 -17.0 11.1 4.33 11.0 4.46 11.0 4.59 11.0 4.66 11.0 4.72 11.0 4.86 -16.7 -17.0 9.87 4.54 9.31 4.21 8.75 3.90 8.47 3.75 8.19 3.59 7.63 3.30-14.7 -15.0 11.7 4.46 11.6 4.58 11.6 4.71 11.6 4.77 11.6 4.83 11.6 4.96 -14.7 -15.0 9.87 4.23 9.31 3.93 8.75 3.64 8.47 3.50 8.19 3.36 7.63 3.09-12.6 -13.0 12.3 4.57 12.3 4.69 12.2 4.81 12.2 4.87 12.2 4.93 12.2 5.05 -12.6 -13.0 9.87 3.96 9.31 3.69 8.75 3.42 8.47 3.29 8.19 3.16 7.63 2.90-10.5 -11.0 12.9 4.68 12.9 4.79 12.8 4.91 12.8 4.96 12.8 5.02 12.8 5.13 -10.5 -11.0 9.87 3.73 9.31 3.47 8.75 3.22 8.47 3.10 8.19 2.98 7.63 2.74-9.5 -10.0 13.2 4.73 13.2 4.84 13.1 4.95 13.1 5.01 13.1 5.06 13.1 5.16 -9.5 -10.0 9.87 3.62 9.31 3.37 8.75 3.13 8.47 3.01 8.19 2.89 7.63 2.67-8.5 -9.1 13.5 4.77 13.5 4.88 13.4 4.99 13.4 5.04 13.4 5.10 13.1 5.02 -8.5 -9.1 9.87 3.53 9.31 3.29 8.75 3.05 8.47 2.94 8.19 2.82 7.63 2.60-7.0 -7.6 13.9 4.84 13.9 4.95 13.9 5.05 13.9 5.10 13.9 5.16 13.1 4.80 -7.0 -7.6 9.87 3.38 9.31 3.16 8.75 2.93 8.47 2.82 8.19 2.71 7.63 2.50-5.0 -5.6 14.5 4.92 14.5 5.02 14.5 5.13 14.5 5.18 14.0 4.97 13.1 4.54 -5.0 -5.6 9.87 3.21 9.31 3.00 8.75 2.79 8.47 2.68 8.19 2.58 7.63 2.38-3.0 -3.7 15.1 5.00 15.1 5.09 15.0 5.15 14.5 4.93 14.0 4.72 13.1 4.32 -3.0 -3.7 9.87 3.06 9.31 2.86 8.75 2.66 8.47 2.56 8.19 2.47 7.63 2.280.0 -0.7 16.0 5.10 16.0 5.17 15.0 4.77 14.5 4.57 14.0 4.38 13.1 4.00 0.0 -0.7 9.87 2.86 9.31 2.67 8.75 2.49 8.47 2.40 8.19 2.31 7.63 2.143.0 2.2 16.9 5.19 16.0 4.81 15.0 4.45 14.5 4.27 14.0 4.09 13.1 3.74 3.0 2.2 9.87 2.68 9.31 2.51 8.75 2.34 8.47 2.26 8.19 2.18 7.63 2.025.0 4.1 16.9 4.97 16.0 4.61 15.0 4.26 14.5 4.09 14.0 3.92 13.1 3.59 5.0 4.1 9.87 2.58 9.31 2.42 8.75 2.26 8.47 2.18 8.19 2.10 7.63 1.947.0 6.0 16.9 4.76 16.0 4.42 15.0 4.09 14.5 3.92 14.0 3.76 13.1 3.45 7.0 6.0 9.87 2.49 9.31 2.33 8.75 2.18 8.47 2.10 8.19 2.02 7.63 1.889.0 7.9 16.9 4.57 16.0 4.24 15.0 3.93 14.5 3.77 14.0 3.62 13.1 3.32 9.0 7.9 9.87 2.40 9.31 2.25 8.75 2.10 8.47 2.03 8.19 1.96 7.63 1.8211.0 9.8 16.9 4.40 16.0 4.08 15.0 3.78 14.5 3.63 14.0 3.49 13.1 3.20 11.0 9.8 9.87 2.32 9.31 2.18 8.75 2.03 8.47 1.96 8.19 1.89 7.63 1.7613.0 11.8 16.9 4.23 16.0 3.93 15.0 3.64 14.5 3.50 14.0 3.36 13.1 3.08 13.0 11.8 9.87 2.24 9.31 2.10 8.75 1.97 8.47 1.90 8.19 1.83 7.63 1.7015.0 13.7 16.9 4.08 16.0 3.79 15.0 3.51 14.5 3.38 14.0 3.24 13.1 2.98 15.0 13.7 9.87 2.17 9.31 2.04 8.75 1.91 8.47 1.84 8.19 1.78 7.63 1.65
110%(110)
-19.8 -20.0 10.1 4.31 10.1 4.45 10.1 4.58 10.0 4.65 10.0 4.71 10.0 4.84
60%(60)
-19.8 -20.0 8.46 4.18 7.98 3.89 7.50 3.60 7.26 3.46 7.02 3.32 6.54 3.05-18.8 -19.0 10.4 4.39 10.4 4.51 10.4 4.64 10.4 4.71 10.3 4.77 10.3 4.90 -18.8 -19.0 8.46 4.03 7.98 3.74 7.50 3.47 7.26 3.34 7.02 3.20 6.54 2.94-16.7 -17.0 11.0 4.52 11.0 4.64 11.0 4.76 11.0 4.82 11.0 4.89 10.9 5.01 -16.7 -17.0 8.46 3.74 7.98 3.48 7.50 3.23 7.26 3.11 7.02 2.99 6.54 2.75-14.7 -15.0 11.6 4.64 11.6 4.76 11.6 4.87 11.6 4.93 11.6 4.99 11.5 5.10 -14.7 -15.0 8.46 3.50 7.98 3.26 7.50 3.03 7.26 2.91 7.02 2.80 6.54 2.58-12.6 -13.0 12.2 4.75 12.2 4.86 12.2 4.97 12.2 5.02 12.2 5.08 12.0 5.07 -12.6 -13.0 8.46 3.28 7.98 3.06 7.50 2.85 7.26 2.74 7.02 2.64 6.54 2.43-10.5 -11.0 12.9 4.85 12.8 4.95 12.8 5.05 12.8 5.11 12.8 5.16 12.0 4.75 -10.5 -11.0 8.46 3.09 7.98 2.89 7.50 2.69 7.26 2.59 7.02 2.49 6.54 2.30-9.5 -10.0 13.2 4.89 13.1 4.99 13.1 5.10 13.1 5.15 12.9 5.05 12.0 4.61 -9.5 -10.0 8.46 3.01 7.98 2.81 7.50 2.62 7.26 2.52 7.02 2.43 6.54 2.24
-8.5 -9.1 13.4 4.93 13.4 5.03 13.4 5.13 13.3 5.14 12.9 4.92 12.0 4.49 -8.5 -9.1 8.46 2.93 7.98 2.74 7.50 2.55 7.26 2.46 7.02 2.37 6.54 2.19-7.0 -7.6 13.9 4.99 13.9 5.09 13.8 5.13 13.3 4.91 12.9 4.70 12.0 4.30 -7.0 -7.6 8.46 2.82 7.98 2.64 7.50 2.46 7.26 2.37 7.02 2.28 6.54 2.11-5.0 -5.6 14.5 5.07 14.5 5.16 13.8 4.84 13.3 4.64 12.9 4.45 12.0 4.07 -5.0 -5.6 8.46 2.68 7.98 2.51 7.50 2.34 7.26 2.26 7.02 2.17 6.54 2.01-3.0 -3.7 15.1 5.14 14.6 4.99 13.8 4.60 13.3 4.41 12.9 4.23 12.0 3.87 -3.0 -3.7 8.46 2.56 7.98 2.40 7.50 2.24 7.26 2.16 7.02 2.08 6.54 1.930.0 -0.7 15.5 4.98 14.6 4.62 13.8 4.27 13.3 4.09 12.9 3.93 12.0 3.60 0.0 -0.7 8.46 2.40 7.98 2.25 7.50 2.10 7.26 2.03 7.02 1.95 6.54 1.813.0 2.2 15.5 4.64 14.6 4.31 13.8 3.98 13.3 3.83 12.9 3.67 12.0 3.37 3.0 2.2 8.46 2.26 7.98 2.12 7.50 1.98 7.26 1.91 7.02 1.85 6.54 1.715.0 4.1 15.5 4.44 14.6 4.13 13.8 3.82 13.3 3.67 12.9 3.52 12.0 3.23 5.0 4.1 8.46 2.17 7.98 2.04 7.50 1.91 7.26 1.85 7.02 1.78 6.54 1.667.0 6.0 15.5 4.26 14.6 3.96 13.8 3.67 13.3 3.53 12.9 3.39 12.0 3.11 7.0 6.0 8.46 2.10 7.98 1.97 7.50 1.85 7.26 1.78 7.02 1.72 6.54 1.609.0 7.9 15.5 4.10 14.6 3.81 13.8 3.53 13.3 3.39 12.9 3.26 12.0 3.00 9.0 7.9 8.46 2.03 7.98 1.91 7.50 1.79 7.26 1.73 7.02 1.67 6.54 1.5511.0 9.8 15.5 3.94 14.6 3.67 13.8 3.40 13.3 3.27 12.9 3.14 12.0 2.89 11.0 9.8 8.46 1.96 7.98 1.84 7.50 1.73 7.26 1.67 7.02 1.62 6.54 1.5113.0 11.8 15.5 3.79 14.6 3.53 13.8 3.28 13.3 3.15 12.9 3.03 12.0 2.79 13.0 11.8 8.46 1.90 7.98 1.79 7.50 1.68 7.26 1.62 7.02 1.57 6.54 1.4615.0 13.7 15.5 3.66 14.6 3.41 13.8 3.16 13.3 3.04 12.9 2.93 12.0 2.70 15.0 13.7 8.46 1.84 7.98 1.73 7.50 1.63 7.26 1.57 7.02 1.52 6.54 1.42
100%
(100)
-19.8 -20.0 10.1 4.53 10.0 4.65 10.0 4.77 10.0 4.83 10.0 4.89 9.98 5.01
50%
(50)
-19.8 -20.0 7.05 3.34 6.65 3.12 6.25 2.90 6.05 2.79 5.85 2.68 5.45 2.47-18.8 -19.0 10.4 4.59 10.4 4.71 10.3 4.83 10.3 4.88 10.3 4.94 10.3 5.06 -18.8 -19.0 7.05 3.22 6.65 3.01 6.25 2.80 6.05 2.69 5.85 2.59 5.45 2.39-16.7 -17.0 11.0 4.71 11.0 4.82 10.9 4.94 10.9 4.99 10.9 5.05 10.9 5.15 -16.7 -17.0 7.05 3.01 6.65 2.81 6.25 2.61 6.05 2.52 5.85 2.42 5.45 2.24-14.7 -15.0 11.6 4.82 11.6 4.93 11.6 5.03 11.5 5.09 11.5 5.14 10.9 4.80 -14.7 -15.0 7.05 2.82 6.65 2.63 6.25 2.45 6.05 2.37 5.85 2.28 5.45 2.11-12.6 -13.0 12.2 4.92 12.2 5.02 12.2 5.12 12.1 5.13 11.7 4.91 10.9 4.48 -12.6 -13.0 7.05 2.65 6.65 2.48 6.25 2.31 6.05 2.23 5.85 2.15 5.45 1.99-10.5 -11.0 12.8 5.01 12.8 5.11 12.5 5.02 12.1 4.81 11.7 4.61 10.9 4.21 -10.5 -11.0 7.05 2.51 6.65 2.35 6.25 2.19 6.05 2.11 5.85 2.04 5.45 1.89-9.5 -10.0 13.1 5.05 13.1 5.15 12.5 4.87 12.1 4.67 11.7 4.47 10.9 4.09 -9.5 -10.0 7.05 2.44 6.65 2.29 6.25 2.13 6.05 2.06 5.85 1.99 5.45 1.84-8.5 -9.1 13.4 5.09 13.3 5.13 12.5 4.74 12.1 4.54 11.7 4.35 10.9 3.98 -8.5 -9.1 7.05 2.38 6.65 2.23 6.25 2.09 6.05 2.01 5.85 1.94 5.45 1.80-7.0 -7.6 13.9 5.15 13.3 4.91 12.5 4.53 12.1 4.35 11.7 4.17 10.9 3.81 -7.0 -7.6 7.05 2.29 6.65 2.15 6.25 2.01 6.05 1.94 5.85 1.87 5.45 1.74-5.0 -5.6 14.1 5.01 13.3 4.64 12.5 4.29 12.1 4.12 11.7 3.95 10.9 3.62 -5.0 -5.6 7.05 2.19 6.65 2.05 6.25 1.92 6.05 1.86 5.85 1.79 5.45 1.66-3.0 -3.7 14.1 4.76 13.3 4.41 12.5 4.08 12.1 3.92 11.7 3.76 10.9 3.44 -3.0 -3.7 7.05 2.09 6.65 1.97 6.25 1.84 6.05 1.78 5.85 1.72 5.45 1.600.0 -0.7 14.1 4.41 13.3 4.09 12.5 3.79 12.1 3.64 11.7 3.49 10.9 3.21 0.0 -0.7 7.05 1.96 6.65 1.85 6.25 1.73 6.05 1.67 5.85 1.62 5.45 1.513.0 2.2 14.1 4.11 13.3 3.83 12.5 3.54 12.1 3.41 11.7 3.27 10.9 3.01 3.0 2.2 7.05 1.86 6.65 1.75 6.25 1.64 6.05 1.59 5.85 1.53 5.45 1.435.0 4.1 14.1 3.94 13.3 3.67 12.5 3.40 12.1 3.27 11.7 3.14 10.9 2.89 5.0 4.1 7.05 1.79 6.65 1.69 6.25 1.58 6.05 1.53 5.85 1.48 5.45 1.387.0 6.0 14.1 3.79 13.3 3.52 12.5 3.27 12.1 3.15 11.7 3.02 10.9 2.78 7.0 6.0 7.05 1.73 6.65 1.63 6.25 1.53 6.05 1.48 5.85 1.44 5.45 1.349.0 7.9 14.1 3.64 13.3 3.39 12.5 3.15 12.1 3.03 11.7 2.91 10.9 2.68 9.0 7.9 7.05 1.68 6.65 1.58 6.25 1.48 6.05 1.44 5.85 1.39 5.45 1.3011.0 9.8 14.1 3.51 13.3 3.27 12.5 3.04 12.1 2.92 11.7 2.81 10.9 2.59 11.0 9.8 7.05 1.62 6.65 1.53 6.25 1.44 6.05 1.40 5.85 1.35 5.45 1.2613.0 11.8 14.1 3.38 13.3 3.15 12.5 2.93 12.1 2.82 11.7 2.71 10.9 2.50 13.0 11.8 7.05 1.57 6.65 1.49 6.25 1.40 6.05 1.35 5.85 1.31 5.45 1.2315.0 13.7 14.1 3.26 13.3 3.04 12.5 2.83 12.1 2.73 11.7 2.62 10.9 2.42 15.0 13.7 7.05 1.53 6.65 1.44 6.25 1.36 6.05 1.32 5.85 1.28 5.45 1.20
90%(90)
-19.8 -20.0 10.0 4.74 10.0 4.85 9.99 4.96 9.98 5.01 9.97 5.06 9.80 5.05TC: Total capacity: kWPI: Power input: kW (Compressor+Outdoor fan motor)
-18.8 -19.0 10.3 4.80 10.3 4.90 10.3 5.01 10.3 5.06 10.3 5.11 9.80 4.85-16.7 -17.0 10.9 4.91 10.9 5.01 10.9 5.11 10.9 5.15 10.5 4.93 9.80 4.50-14.7 -15.0 11.6 5.01 11.5 5.10 11.3 5.00 10.9 4.79 10.5 4.59 9.80 4.19-12.6 -13.0 12.2 5.10 12.0 5.06 11.3 4.67 10.9 4.48 10.5 4.29 9.80 3.93-10.5 -11.0 12.7 5.12 12.0 4.75 11.3 4.39 10.9 4.21 10.5 4.03 9.80 3.69-9.5 -10.0 12.7 4.97 12.0 4.60 11.3 4.25 10.9 4.08 10.5 3.92 9.80 3.59-8.5 -9.1 12.7 4.83 12.0 4.48 11.3 4.14 10.9 3.98 10.5 3.81 9.80 3.50-7.0 -7.6 12.7 4.62 12.0 4.29 11.3 3.97 10.9 3.81 10.5 3.66 9.80 3.36-5.0 -5.6 12.7 4.37 12.0 4.06 11.3 3.76 10.9 3.61 10.5 3.47 9.80 3.18-3.0 -3.7 12.7 4.16 12.0 3.87 11.3 3.58 10.9 3.44 10.5 3.31 9.80 3.040.0 -0.7 12.7 3.86 12.0 3.59 11.3 3.33 10.9 3.21 10.5 3.08 9.80 2.83
3.0 2.2 12.7 3.61 12.0 3.36 11.3 3.12 10.9 3.01 10.5 2.89 9.80 2.665.0 4.1 12.7 3.47 12.0 3.23 11.3 3.00 10.9 2.89 10.5 2.78 9.80 2.567.0 6.0 12.7 3.33 12.0 3.11 11.3 2.89 10.9 2.78 10.5 2.67 9.80 2.479.0 7.9 12.7 3.21 12.0 2.99 11.3 2.78 10.9 2.68 10.5 2.58 9.80 2.3811.0 9.8 12.7 3.09 12.0 2.89 11.3 2.69 10.9 2.59 10.5 2.49 9.80 2.3013.0 11.8 12.7 2.98 12.0 2.78 11.3 2.59 10.9 2.50 10.5 2.41 9.80 2.2215.0 13.7 12.7 2.88 12.0 2.69 11.3 2.51 10.9 2.42 10.5 2.33 9.80 2.15
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 230/308
Capacity Tables EDMT34-635A
224 RX(Y)MQ-P
RXYMQ5PVE [50/60Hz] Heating capacityCombina-tion (%)
(Capacityindex)
Outdoorair temp.
Indoor air temp. (°CDB) Combina-tion (%)
(Capacityindex)
Outdoorair temp.
Indoor air temp. (°CDB)16.0 18.0 20.0 21.0 22.0 24.0 16.0 18.0 20.0 21.0 22.0 24.0
TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI°CDB °CWB kW kW kW kW kW kW kW kW kW kW kW kW °CDB °CWB kW kW kW kW kW kW kW kW kW kW kW kW
130%(162.5)
-19.8 -20.0 11.1 3.29 11.0 3.48 11.0 3.68 11.0 3.78 11.0 3.88 10.9 4.07
80%(100)
-19.8 -20.0 10.8 4.62 10.8 4.74 10.8 4.86 10.8 4.92 10.8 4.98 10.7 5.10-18.8 -19.0 11.4 3.40 11.4 3.59 11.3 3.78 11.3 3.87 11.3 3.97 11.3 4.16 -18.8 -19.0 11.2 4.68 11.1 4.80 11.1 4.92 11.1 4.98 11.1 5.04 11.1 5.15-16.7 -17.0 12.1 3.59 12.0 3.77 12.0 3.95 12.0 4.04 11.9 4.13 11.9 4.31 -16.7 -17.0 11.8 4.81 11.8 4.92 11.8 5.03 11.8 5.08 11.7 5.14 11.2 4.85-14.7 -15.0 12.7 3.77 12.7 3.94 12.6 4.11 12.6 4.19 12.6 4.28 12.6 4.45 -14.7 -15.0 12.5 4.92 12.4 5.02 12.4 5.13 12.4 5.16 12.0 4.95 11.2 4.53-12.6 -13.0 13.4 3.92 13.3 4.09 13.3 4.25 13.3 4.33 13.3 4.41 13.2 4.57 -12.6 -13.0 13.1 5.01 13.1 5.11 12.8 5.04 12.4 4.84 12.0 4.64 11.2 4.25
-10.5 -11.0 14.0 4.07 14.0 4.22 14.0 4.37 13.9 4.45 13.9 4.53 13.9 4.68 -10.5 -11.0 13.8 5.10 13.6 5.11 12.8 4.73 12.4 4.55 12.0 4.36 11.2 4.01-9.5 -10.0 14.4 4.13 14.3 4.28 14.3 4.43 14.3 4.51 14.3 4.58 14.2 4.73 -9.5 -10.0 14.1 5.15 13.6 4.96 12.8 4.60 12.4 4.42 12.0 4.24 11.2 3.89-8.5 -9.1 14.7 4.19 14.6 4.34 14.6 4.48 14.6 4.56 14.5 4.63 14.5 4.78 -8.5 -9.1 14.4 5.18 13.6 4.84 12.8 4.48 12.4 4.31 12.0 4.13 11.2 3.80-7.0 -7.6 15.2 4.28 15.1 4.42 15.1 4.56 15.1 4.64 15.0 4.71 15.0 4.85 -7.0 -7.6 14.4 4.98 13.6 4.64 12.8 4.30 12.4 4.13 12.0 3.97 11.2 3.65-5.0 -5.6 15.8 4.39 15.8 4.53 15.7 4.66 15.7 4.73 15.7 4.80 15.7 4.94 -5.0 -5.6 14.4 4.72 13.6 4.40 12.8 4.08 12.4 3.92 12.0 3.77 11.2 3.47-3.0 -3.7 16.4 4.49 16.4 4.62 16.4 4.75 16.3 4.82 16.3 4.88 16.3 5.01 -3.0 -3.7 14.4 4.50 13.6 4.19 12.8 3.89 12.4 3.74 12.0 3.60 11.2 3.310.0 -0.7 17.4 4.63 17.4 4.75 17.3 4.88 17.3 4.94 17.3 5.00 17.3 5.12 0.0 -0.7 14.4 4.18 13.6 3.90 12.8 3.63 12.4 3.49 12.0 3.36 11.2 3.103.0 2.2 18.4 4.75 18.3 4.87 18.3 4.99 18.3 5.04 18.3 5.10 18.1 5.17 3.0 2.2 14.4 3.92 13.6 3.66 12.8 3.41 12.4 3.28 12.0 3.16 11.2 2.925.0 4.1 19.0 4.83 19.0 4.94 18.9 5.05 18.9 5.11 18.9 5.16 18.1 4.96 5.0 4.1 14.4 3.77 13.6 3.52 12.8 3.28 12.4 3.16 12.0 3.04 11.2 2.817.0 6.0 19.6 4.89 19.6 5.00 19.6 5.11 19.5 5.17 19.5 5.20 18.1 4.76 7.0 6.0 14.4 3.63 13.6 3.39 12.8 3.16 12.4 3.04 12.0 2.93 11.2 2.719.0 7.9 20.3 4.96 20.2 5.07 20.2 5.17 20.1 5.21 19.5 5.00 18.1 4.58 9.0 7.9 14.4 3.49 13.6 3.27 12.8 3.04 12.4 2.94 12.0 2.83 11.2 2.6211.0 9.8 20.9 5.02 20.8 5.12 20.8 5.22 20.1 5.01 19.5 4.81 18.1 4.41 11.0 9.8 14.4 3.37 13.6 3.15 12.8 2.94 12.4 2.84 12.0 2.73 11.2 2.5313.0 11.8 21.5 5.08 21.5 5.18 20.8 5.02 20.1 4.82 19.5 4.63 18.1 4.24 13.0 11.8 14.4 3.25 13.6 3.05 12.8 2.84 12.4 2.74 12.0 2.64 11.2 2.4515.0 13.7 22.2 5.14 22.1 5.23 20.8 4.85 20.1 4.65 19.5 4.47 18.1 4.10 15.0 13.7 14.4 3.15 13.6 2.95 12.8 2.75 12.4 2.66 12.0 2.56 11.2 2.38
120%(150)
-19.8 -20.0 11.0 3.55 11.0 3.74 11.0 3.92 10.9 4.01 10.9 4.10 10.9 4.28
70%(87.5)
-19.8 -20.0 10.8 4.88 10.8 4.99 10.7 5.09 10.7 5.15 10.5 5.02 9.76 4.60-18.8 -19.0 11.3 3.65 11.3 3.83 11.3 4.00 11.3 4.09 11.2 4.18 11.2 4.36 -18.8 -19.0 11.1 4.94 11.1 5.04 11.1 5.15 10.8 5.04 10.5 4.83 9.76 4.43-16.7 -17.0 12.0 3.83 12.0 4.00 11.9 4.17 11.9 4.25 11.9 4.33 11.9 4.50 -16.7 -17.0 11.8 5.05 11.7 5.15 11.2 4.88 10.8 4.68 10.5 4.49 9.76 4.12-14.7 -15.0 12.7 4.00 12.6 4.15 12.6 4.31 12.6 4.39 12.6 4.47 12.5 4.62 -14.7 -15.0 12.4 5.15 11.9 4.92 11.2 4.56 10.8 4.38 10.5 4.20 9.76 3.86-12.6 -13.0 13.3 4.14 13.3 4.29 13.3 4.44 13.2 4.51 13.2 4.59 13.2 4.74 -12.6 -13.0 12.6 4.96 11.9 4.61 11.2 4.27 10.8 4.11 10.5 3.95 9.76 3.63-10.5 -11.0 14.0 4.27 13.9 4.42 13.9 4.56 13.9 4.63 13.9 4.70 13.8 4.84 -10.5 -11.0 12.6 4.66 11.9 4.34 11.2 4.03 10.8 3.87 10.5 3.72 9.76 3.43-9.5 -10.0 14.3 4.34 14.3 4.47 14.2 4.61 14.2 4.68 14.2 4.75 14.2 4.89 -9.5 -10.0 12.6 4.53 11.9 4.22 11.2 3.91 10.8 3.77 10.5 3.62 9.76 3.33-8.5 -9.1 14.6 4.39 14.6 4.52 14.5 4.66 14.5 4.73 14.5 4.80 14.5 4.93 -8.5 -9.1 12.6 4.41 11.9 4.11 11.2 3.82 10.8 3.67 10.5 3.53 9.76 3.25
-7.0 -7.6 15.1 4.47 15.1 4.60 15.0 4.73 15.0 4.80 15.0 4.87 15.0 5.00 -7.0 -7.6 12.6 4.23 11.9 3.95 11.2 3.67 10.8 3.53 10.5 3.40 9.76 3.13-5.0 -5.6 15.8 4.58 15.7 4.70 15.7 4.83 15.7 4.89 15.7 4.95 15.6 5.08 -5.0 -5.6 12.6 4.02 11.9 3.75 11.2 3.49 10.8 3.36 10.5 3.23 9.76 2.98-3.0 -3.7 16.4 4.67 16.4 4.79 16.3 4.91 16.3 4.97 16.3 5.03 16.3 5.15 -3.0 -3.7 12.6 3.83 11.9 3.58 11.2 3.33 10.8 3.21 10.5 3.09 9.76 2.850.0 -0.7 17.4 4.80 17.3 4.91 17.3 5.02 17.3 5.08 17.3 5.14 16.7 5.01 0.0 -0.7 12.6 3.57 11.9 3.34 11.2 3.11 10.8 3.00 10.5 2.89 9.76 2.673.0 2.2 18.3 4.91 18.3 5.02 18.3 5.13 18.2 5.18 18.0 5.11 16.7 4.68 3.0 2.2 12.6 3.36 11.9 3.14 11.2 2.93 10.8 2.82 10.5 2.72 9.76 2.525.0 4.1 19.0 4.98 18.9 5.08 18.9 5.19 18.6 5.11 18.0 4.90 16.7 4.49 5.0 4.1 12.6 3.23 11.9 3.02 11.2 2.82 10.8 2.72 10.5 2.62 9.76 2.437.0 6.0 19.6 5.04 19.5 5.14 19.2 5.11 18.6 4.91 18.0 4.71 16.7 4.32 7.0 6.0 12.6 3.11 11.9 2.91 11.2 2.72 10.8 2.63 10.5 2.53 9.76 2.359.0 7.9 20.2 5.10 20.2 5.20 19.2 4.91 18.6 4.72 18.0 4.53 16.7 4.15 9.0 7.9 12.6 3.00 11.9 2.81 11.2 2.63 10.8 2.54 10.5 2.45 9.76 2.2711.0 9.8 20.8 5.16 20.4 5.11 19.2 4.73 18.6 4.54 18.0 4.36 16.7 4.00 11.0 9.8 12.6 2.90 11.9 2.72 11.2 2.54 10.8 2.46 10.5 2.37 9.76 2.2013.0 11.8 21.5 5.22 20.4 4.91 19.2 4.55 18.6 4.37 18.0 4.20 16.7 3.86 13.0 11.8 12.6 2.80 11.9 2.63 11.2 2.46 10.8 2.38 10.5 2.29 9.76 2.1315.0 13.7 21.7 5.10 20.4 4.74 19.2 4.39 18.6 4.22 18.0 4.06 16.7 3.73 15.0 13.7 12.6 2.72 11.9 2.55 11.2 2.39 10.8 2.31 10.5 2.23 9.76 2.07
110%(137.5)
-19.8 -20.0 11.0 3.82 10.9 3.99 10.9 4.15 10.9 4.24 10.9 4.32 10.8 4.48
60%(75)
-19.8 -20.0 10.7 5.15 10.2 4.86 9.60 4.50 9.29 4.33 8.98 4.16 8.37 3.82-18.8 -19.0 11.3 3.91 11.3 4.07 11.2 4.23 11.2 4.31 11.2 4.39 11.2 4.56 -18.8 -19.0 10.8 5.03 10.2 4.68 9.60 4.34 9.29 4.17 8.98 4.01 8.37 3.68-16.7 -17.0 12.0 4.08 11.9 4.23 11.9 4.38 11.9 4.46 11.9 4.53 11.8 4.69 -16.7 -17.0 10.8 4.68 10.2 4.36 9.60 4.04 9.29 3.89 8.98 3.74 8.37 3.44-14.7 -15.0 12.6 4.23 12.6 4.37 12.6 4.51 12.5 4.59 12.5 4.66 12.5 4.80 -14.7 -15.0 10.8 4.37 10.2 4.08 9.60 3.79 9.29 3.64 8.98 3.50 8.37 3.23-12.6 -13.0 13.3 4.36 13.2 4.50 13.2 4.63 13.2 4.70 13.2 4.77 13.2 4.91 -12.6 -13.0 10.8 4.11 10.2 3.83 9.60 3.56 9.29 3.43 8.98 3.30 8.37 3.04-10.5 -11.0 13.9 4.48 13.9 4.61 13.9 4.74 13.9 4.81 13.8 4.87 13.8 5.00 -10.5 -11.0 10.8 3.87 10.2 3.61 9.60 3.36 9.29 3.24 8.98 3.12 8.37 2.88-9.5 -10.0 14.3 4.54 14.2 4.67 14.2 4.79 14.2 4.86 14.2 4.92 14.1 5.05 -9.5 -10.0 10.8 3.76 10.2 3.51 9.60 3.27 9.29 3.15 8.98 3.03 8.37 2.80-8.5 -9.1 14.6 4.59 14.5 4.71 14.5 4.84 14.5 4.90 14.5 4.96 14.4 5.08 -8.5 -9.1 10.8 3.67 10.2 3.43 9.60 3.19 9.29 3.08 8.98 2.96 8.37 2.74-7.0 -7.6 15.1 4.66 15.0 4.78 15.0 4.90 15.0 4.96 15.0 5.02 14.9 5.14 -7.0 -7.6 10.8 3.53 10.2 3.30 9.60 3.07 9.29 2.96 8.98 2.85 8.37 2.64-5.0 -5.6 15.7 4.76 15.7 4.87 15.6 4.99 15.6 5.05 15.6 5.10 15.3 5.09 -5.0 -5.6 10.8 3.35 10.2 3.14 9.60 2.93 9.29 2.82 8.98 2.72 8.37 2.52-3.0 -3.7 16.3 4.84 16.3 4.95 16.3 5.06 16.3 5.12 16.2 5.17 15.3 4.84 -3.0 -3.7 10.8 3.21 10.2 3.00 9.60 2.80 9.29 2.70 8.98 2.61 8.37 2.41
0.0 -0.7 17.3 4.96 17.3 5.07 17.3 5.17 17.0 5.12 16.5 4.91 15.3 4.50 0.0 -0.7 10.8 3.00 10.2 2.81 9.60 2.62 9.29 2.53 8.98 2.44 8.37 2.273.0 2.2 18.3 5.07 18.2 5.17 17.6 4.98 17.0 4.79 16.5 4.59 15.3 4.21 3.0 2.2 10.8 2.82 10.2 2.65 9.60 2.48 9.29 2.39 8.98 2.31 8.37 2.145.0 4.1 18.9 5.13 18.7 5.16 17.6 4.78 17.0 4.59 16.5 4.41 15.3 4.04 5.0 4.1 10.8 2.72 10.2 2.55 9.60 2.39 9.29 2.31 8.98 2.23 8.37 2.077.0 6.0 19.5 5.19 18.7 4.96 17.6 4.59 17.0 4.41 16.5 4.23 15.3 3.89 7.0 6.0 10.8 2.62 10.2 2.46 9.60 2.31 9.29 2.23 8.98 2.15 8.37 2.009.0 7.9 19.9 5.12 18.7 4.76 17.6 4.41 17.0 4.24 16.5 4.08 15.3 3.75 9.0 7.9 10.8 2.54 10.2 2.38 9.60 2.23 9.29 2.16 8.98 2.09 8.37 1.9411.0 9.8 19.9 4.93 18.7 4.59 17.6 4.25 17.0 4.09 16.5 3.93 15.3 3.61 11.0 9.8 10.8 2.45 10.2 2.31 9.60 2.16 9.29 2.09 8.98 2.02 8.37 1.8813.0 11.8 19.9 4.74 18.7 4.42 17.6 4.10 17.0 3.94 16.5 3.79 15.3 3.49 13.0 11.8 10.8 2.37 10.2 2.23 9.60 2.10 9.29 2.03 8.98 1.96 8.37 1.8315.0 13.7 19.9 4.58 18.7 4.26 17.6 3.96 17.0 3.81 16.5 3.66 15.3 3.37 15.0 13.7 10.8 2.30 10.2 2.17 9.60 2.04 9.29 1.97 8.98 1.90 8.37 1.78
100%(125)
-19.8 -20.0 10.9 4.09 10.9 4.24 10.9 4.39 10.9 4.46 10.8 4.54 10.8 4.69
50%(62.5)
-19.8 -20.0 9.03 4.18 8.51 3.90 8.00 3.62 7.74 3.49 7.49 3.36 6.97 3.09-18.8 -19.0 11.3 4.17 11.2 4.31 11.2 4.46 11.2 4.53 11.2 4.61 11.1 4.75 -18.8 -19.0 9.03 4.03 8.51 3.76 8.00 3.50 7.74 3.37 7.49 3.24 6.97 2.99-16.7 -17.0 11.9 4.32 11.9 4.46 11.9 4.60 11.8 4.67 11.8 4.73 11.8 4.87 -16.7 -17.0 9.03 3.76 8.51 3.51 8.00 3.27 7.74 3.15 7.49 3.03 6.97 2.80-14.7 -15.0 12.6 4.46 12.5 4.59 12.5 4.72 12.5 4.78 12.5 4.85 12.5 4.98 -14.7 -15.0 9.03 3.52 8.51 3.29 8.00 3.07 7.74 2.96 7.49 2.85 6.97 2.64-12.6 -13.0 13.2 4.58 13.2 4.70 13.2 4.83 13.2 4.89 13.1 4.95 13.1 5.08 -12.6 -13.0 9.03 3.32 8.51 3.10 8.00 2.89 7.74 2.79 7.49 2.69 6.97 2.49-10.5 -11.0 13.9 4.69 13.9 4.81 13.8 4.93 13.8 4.98 13.8 5.04 13.8 5.16 -10.5 -11.0 9.03 3.13 8.51 2.94 8.00 2.74 7.74 2.64 7.49 2.55 6.97 2.36-9.5 -10.0 14.2 4.74 14.2 4.86 14.2 4.97 14.1 5.03 14.1 5.09 13.9 5.11 -9.5 -10.0 9.03 3.05 8.51 2.86 8.00 2.67 7.74 2.58 7.49 2.49 6.97 2.31-8.5 -9.1 14.5 4.79 14.5 4.90 14.5 5.01 14.4 5.07 14.4 5.12 13.9 4.98 -8.5 -9.1 9.03 2.98 8.51 2.79 8.00 2.61 7.74 2.52 7.49 2.43 6.97 2.26-7.0 -7.6 15.0 4.86 15.0 4.97 14.9 5.07 14.9 5.13 14.9 5.18 13.9 4.77 -7.0 -7.6 9.03 2.87 8.51 2.69 8.00 2.52 7.74 2.43 7.49 2.34 6.97 2.18-5.0 -5.6 15.7 4.94 15.6 5.05 15.6 5.15 15.5 5.15 15.0 4.94 13.9 4.52 -5.0 -5.6 9.03 2.74 8.51 2.57 8.00 2.40 7.74 2.32 7.49 2.24 6.97 2.08-3.0 -3.7 16.3 5.02 16.3 5.12 16.0 5.10 15.5 4.90 15.0 4.70 13.9 4.31 -3.0 -3.7 9.03 2.62 8.51 2.46 8.00 2.30 7.74 2.23 7.49 2.15 6.97 2.000.0 -0.7 17.3 5.13 17.0 5.12 16.0 4.74 15.5 4.55 15.0 4.37 13.9 4.01 0.0 -0.7 9.03 2.46 8.51 2.31 8.00 2.17 7.74 2.09 7.49 2.02 6.97 1.883.0 2.2 18.1 5.15 17.0 4.78 16.0 4.43 15.5 4.26 15.0 4.09 13.9 3.76 3.0 2.2 9.03 2.32 8.51 2.18 8.00 2.05 7.74 1.98 7.49 1.92 6.97 1.795.0 4.1 18.1 4.93 17.0 4.59 16.0 4.25 15.5 4.09 15.0 3.93 13.9 3.61 5.0 4.1 9.03 2.24 8.51 2.11 8.00 1.98 7.74 1.92 7.49 1.85 6.97 1.73
7.0 6.0 18.1 4.74 17.0 4.41 16.0 4.09 15.5 3.93 15.0 3.78 13.9 3.48 7.0 6.0 9.03 2.17 8.51 2.04 8.00 1.92 7.74 1.86 7.49 1.80 6.97 1.689.0 7.9 18.1 4.55 17.0 4.24 16.0 3.94 15.5 3.79 15.0 3.64 13.9 3.35 9.0 7.9 9.03 2.10 8.51 1.98 8.00 1.86 7.74 1.80 7.49 1.74 6.97 1.6311.0 9.8 18.1 4.39 17.0 4.09 16.0 3.80 15.5 3.65 15.0 3.51 13.9 3.24 11.0 9.8 9.03 2.03 8.51 1.92 8.00 1.80 7.74 1.75 7.49 1.69 6.97 1.5813.0 11.8 18.1 4.22 17.0 3.94 16.0 3.66 15.5 3.52 15.0 3.39 13.9 3.13 13.0 11.8 9.03 1.97 8.51 1.86 8.00 1.75 7.74 1.69 7.49 1.64 6.97 1.5415.0 13.7 18.1 4.08 17.0 3.81 16.0 3.54 15.5 3.41 15.0 3.28 13.9 3.03 15.0 13.7 9.03 1.91 8.51 1.81 8.00 1.70 7.74 1.65 7.49 1.60 6.97 1.50
90%(112.5)
-19.8 -20.0 10.9 4.35 10.8 4.49 10.8 4.62 10.8 4.69 10.8 4.76 10.8 4.90TC: Total capacity: kWPI: Power input: kW (Compressor+Outdoor fan motor)
-18.8 -19.0 11.2 4.43 11.2 4.56 11.2 4.69 11.1 4.76 11.1 4.82 11.1 4.95-16.7 -17.0 11.9 4.56 11.8 4.69 11.8 4.81 11.8 4.87 11.8 4.94 11.8 5.06-14.7 -15.0 12.5 4.69 12.5 4.80 12.5 4.92 12.5 4.98 12.4 5.04 12.4 5.16-12.6 -13.0 13.2 4.80 13.2 4.91 13.1 5.02 13.1 5.08 13.1 5.13 12.5 4.91-10.5 -11.0 13.8 4.90 13.8 5.00 13.8 5.11 13.8 5.16 13.5 5.05 12.5 4.62-9.5 -10.0 14.2 4.94 14.1 5.05 14.1 5.15 13.9 5.11 13.5 4.90 12.5 4.49-8.5 -9.1 14.5 4.98 14.4 5.09 14.4 5.18 13.9 4.97 13.5 4.77 12.5 4.37-7.0 -7.6 15.0 5.05 14.9 5.15 14.4 4.97 13.9 4.77 13.5 4.58 12.5 4.20-5.0 -5.6 15.6 5.13 15.3 5.08 14.4 4.70 13.9 4.52 13.5 4.34 12.5 3.98-3.0 -3.7 16.2 5.20 15.3 4.84 14.4 4.48 13.9 4.31 13.5 4.13 12.5 3.800.0 -0.7 16.3 4.83 15.3 4.49 14.4 4.17 13.9 4.01 13.5 3.85 12.5 3.543.0 2.2 16.3 4.52 15.3 4.21 14.4 3.91 13.9 3.76 13.5 3.61 12.5 3.335.0 4.1 16.3 4.33 15.3 4.04 14.4 3.75 13.9 3.61 13.5 3.47 12.5 3.207.0 6.0 16.3 4.17 15.3 3.89 14.4 3.61 13.9 3.48 13.5 3.35 12.5 3.099.0 7.9 16.3 4.01 15.3 3.74 14.4 3.48 13.9 3.35 13.5 3.23 12.5 2.9811.0 9.8 16.3 3.87 15.3 3.61 14.4 3.36 13.9 3.24 13.5 3.12 12.5 2.8813.0 11.8 16.3 3.73 15.3 3.48 14.4 3.24 13.9 3.12 13.5 3.01 12.5 2.7815.0 13.7 16.3 3.60 15.3 3.37 14.4 3.14 13.9 3.03 13.5 2.91 12.5 2.69
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 231/308
EDMT34-635A Capacity Tables
RX(Y)MQ-P 225
12
RXYMQ6PVE [50/60Hz] Heating capacityCombina-tion (%)
(Capacityindex)
Outdoorair temp.
Indoor air temp. (°CDB) Combina-tion (%)
(Capacityindex)
Outdoorair temp.
Indoor air temp. (°CDB)16.0 18.0 20.0 21.0 22.0 24.0 16.0 18.0 20.0 21.0 22.0 24.0
TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI TC PI°CDB °CWB kW kW kW kW kW kW kW kW kW kW kW kW °CDB °CWB kW kW kW kW kW kW kW kW kW kW kW kW
130%(182)
-19.8 -20.0 11.3 2.96 11.3 3.19 11.2 3.42 11.2 3.54 11.2 3.65 11.1 3.89
80%(112)
-19.8 -20.0 11.0 4.52 11.0 4.67 11.0 4.81 11.0 4.88 10.9 4.95 10.9 5.10-18.8 -19.0 11.6 3.09 11.6 3.31 11.6 3.53 11.5 3.65 11.5 3.76 11.5 3.98 -18.8 -19.0 11.4 4.60 11.3 4.74 11.3 4.88 11.3 4.95 11.3 5.02 11.3 5.16-16.7 -17.0 12.3 3.32 12.3 3.53 12.2 3.74 12.2 3.85 12.2 3.95 12.1 4.16 -16.7 -17.0 12.0 4.75 12.0 4.88 12.0 5.01 12.0 5.07 11.9 5.14 11.9 5.27-14.7 -15.0 13.0 3.52 12.9 3.72 12.9 3.92 12.9 4.02 12.8 4.12 12.8 4.32 -14.7 -15.0 12.7 4.88 12.7 5.00 12.6 5.12 12.6 5.18 12.6 5.25 12.5 5.34
-12.6 -13.0 13.6 3.71 13.6 3.90 13.6 4.09 13.5 4.18 13.5 4.28 13.5 4.47 -12.6 -13.0 13.4 4.99 13.3 5.11 13.3 5.23 13.3 5.28 13.3 5.34 12.5 5.01-10.5 -11.0 14.3 3.87 14.3 4.05 14.2 4.24 14.2 4.33 14.2 4.42 14.1 4.60 -10.5 -11.0 14.0 5.10 14.0 5.21 14.0 5.32 13.9 5.36 13.5 5.14 12.5 4.72-9.5 -10.0 14.6 3.95 14.6 4.13 14.6 4.31 14.5 4.39 14.5 4.48 14.5 4.66 -9.5 -10.0 14.4 5.15 14.3 5.25 14.3 5.36 13.9 5.21 13.5 5.00 12.5 4.59-8.5 -9.1 14.9 4.02 14.9 4.19 14.9 4.37 14.8 4.45 14.8 4.54 14.8 4.71 -8.5 -9.1 14.7 5.19 14.6 5.29 14.4 5.28 13.9 5.07 13.5 4.87 12.5 4.48-7.0 -7.6 15.4 4.12 15.4 4.29 15.4 4.46 15.3 4.54 15.3 4.63 15.3 4.79 -7.0 -7.6 15.2 5.26 15.1 5.36 14.4 5.07 13.9 4.87 13.5 4.68 12.5 4.30-5.0 -5.6 16.1 4.26 16.1 4.42 16.0 4.58 16.0 4.66 16.0 4.74 15.9 4.90 -5.0 -5.6 15.8 5.34 15.3 5.18 14.4 4.81 13.9 4.62 13.5 4.44 12.5 4.09-3.0 -3.7 16.7 4.37 16.7 4.52 16.7 4.68 16.6 4.76 16.6 4.83 16.6 4.99 -3.0 -3.7 16.3 5.30 15.3 4.94 14.4 4.58 13.9 4.41 13.5 4.24 12.5 3.910.0 -0.7 17.7 4.53 17.7 4.68 17.7 4.82 17.6 4.90 17.6 4.97 17.6 5.12 0.0 -0.7 16.3 4.93 15.3 4.60 14.4 4.27 13.9 4.11 13.5 3.96 12.5 3.653.0 2.2 18.7 4.68 18.7 4.81 18.6 4.95 18.6 5.02 18.6 5.09 18.5 5.23 3.0 2.2 16.3 4.62 15.3 4.31 14.4 4.01 13.9 3.87 13.5 3.72 12.5 3.445.0 4.1 19.3 4.76 19.3 4.90 19.3 5.03 19.2 5.10 19.2 5.16 19.2 5.29 5.0 4.1 16.3 4.44 15.3 4.15 14.4 3.86 13.9 3.72 13.5 3.58 12.5 3.317.0 6.0 20.0 4.84 19.9 4.97 19.9 5.10 19.9 5.16 19.9 5.23 19.8 5.36 7.0 6.0 16.3 4.27 15.3 3.99 14.4 3.72 13.9 3.58 13.5 3.45 12.5 3.199.0 7.9 20.6 4.92 20.6 5.04 20.5 5.17 20.5 5.23 20.5 5.29 20.4 5.39 9.0 7.9 16.3 4.12 15.3 3.85 14.4 3.59 13.9 3.46 13.5 3.33 12.5 3.0811.0 9.8 21.2 4.99 21.2 5.11 21.2 5.23 21.1 5.29 21.1 5.35 20.4 5.19 11.0 9.8 16.3 3.97 15.3 3.72 14.4 3.47 13.9 3.34 13.5 3.22 12.5 2.9813.0 11.8 21.9 5.06 21.9 5.18 21.8 5.30 21.8 5.35 21.8 5.41 20.4 5.00 13.0 11.8 16.3 3.83 15.3 3.59 14.4 3.35 13.9 3.23 13.5 3.12 12.5 2.8915.0 13.7 22.6 5.12 22.5 5.24 22.5 5.35 22.4 5.41 21.9 5.26 20.4 4.83 15.0 13.7 16.3 3.71 15.3 3.48 14.4 3.25 13.9 3.13 13.5 3.02 12.5 2.80
120%(168)
-19.8 -20.0 11.2 3.27 11.2 3.49 11.2 3.70 11.1 3.81 11.1 3.91 11.1 4.13
70%(98)
-19.8 -20.0 11.0 4.84 10.9 4.96 10.9 5.09 10.9 5.15 10.9 5.21 10.9 5.34-18.8 -19.0 11.6 3.39 11.5 3.60 11.5 3.80 11.5 3.91 11.5 4.01 11.4 4.22 -18.8 -19.0 11.3 4.91 11.3 5.03 11.3 5.15 11.2 5.21 11.2 5.27 11.0 5.22-16.7 -17.0 12.2 3.60 12.2 3.80 12.2 3.99 12.2 4.09 12.1 4.19 12.1 4.38 -16.7 -17.0 12.0 5.03 11.9 5.15 11.9 5.26 11.9 5.32 11.8 5.30 11.0 4.86-14.7 -15.0 12.9 3.79 12.9 3.98 12.8 4.16 12.8 4.26 12.8 4.35 12.8 4.53 -14.7 -15.0 12.6 5.15 12.6 5.25 12.6 5.36 12.2 5.16 11.8 4.95 11.0 4.55-12.6 -13.0 13.6 3.96 13.5 4.14 13.5 4.31 13.5 4.40 13.5 4.49 13.4 4.67 -12.6 -13.0 13.3 5.25 13.3 5.35 12.6 5.04 12.2 4.84 11.8 4.65 11.0 4.28-10.5 -11.0 14.2 4.12 14.2 4.29 14.2 4.45 14.2 4.54 14.1 4.62 14.1 4.79 -10.5 -11.0 14.0 5.34 13.4 5.11 12.6 4.75 12.2 4.56 11.8 4.39 11.0 4.04-9.5 -10.0 14.6 4.19 14.5 4.35 14.5 4.52 14.5 4.60 14.5 4.68 14.4 4.84 -9.5 -10.0 14.2 5.33 13.4 4.97 12.6 4.61 12.2 4.44 11.8 4.27 11.0 3.93-8.5 -9.1 14.9 4.25 14.8 4.41 14.8 4.57 14.8 4.65 14.8 4.73 14.7 4.89 -8.5 -9.1 14.2 5.20 13.4 4.84 12.6 4.50 12.2 4.33 11.8 4.16 11.0 3.84-7.0 -7.6 15.4 4.35 15.3 4.51 15.3 4.66 15.3 4.74 15.3 4.81 15.2 4.97 -7.0 -7.6 14.2 4.99 13.4 4.65 12.6 4.32 12.2 4.16 11.8 4.00 11.0 3.69-5.0 -5.6 16.1 4.47 16.0 4.62 16.0 4.77 16.0 4.84 15.9 4.92 15.9 5.06 -5.0 -5.6 14.2 4.73 13.4 4.42 12.6 4.11 12.2 3.96 11.8 3.81 11.0 3.51-3.0 -3.7 16.7 4.58 16.6 4.72 16.6 4.86 16.6 4.93 16.6 5.00 16.5 5.15 -3.0 -3.7 14.2 4.52 13.4 4.22 12.6 3.92 12.2 3.78 11.8 3.64 11.0 3.360.0 -0.7 17.7 4.73 17.7 4.86 17.6 5.00 17.6 5.07 17.6 5.13 17.5 5.27 0.0 -0.7 14.2 4.21 13.4 3.94 12.6 3.67 12.2 3.54 11.8 3.41 11.0 3.153.0 2.2 18.7 4.86 18.6 4.99 18.6 5.12 18.6 5.18 18.5 5.24 18.5 5.37 3.0 2.2 14.2 3.96 13.4 3.70 12.6 3.45 12.2 3.33 11.8 3.21 11.0 2.975.0 4.1 19.3 4.94 19.3 5.07 19.2 5.19 19.2 5.25 19.2 5.31 18.8 5.29 5.0 4.1 14.2 3.80 13.4 3.56 12.6 3.32 12.2 3.21 11.8 3.09 11.0 2.867.0 6.0 19.9 5.02 19.9 5.14 19.8 5.25 19.8 5.31 19.8 5.37 18.8 5.09 7.0 6.0 14.2 3.67 13.4 3.43 12.6 3.21 12.2 3.09 11.8 2.98 11.0 2.779.0 7.9 20.6 5.09 20.5 5.20 20.5 5.32 20.5 5.37 20.2 5.33 18.8 4.90 9.0 7.9 14.2 3.54 13.4 3.32 12.6 3.10 12.2 2.99 11.8 2.89 11.0 2.6811.0 9.8 21.2 5.15 21.2 5.27 21.1 5.38 20.9 5.35 20.2 5.14 18.8 4.72 11.0 9.8 14.2 3.42 13.4 3.21 12.6 3.00 12.2 2.89 11.8 2.79 11.0 2.5913.0 11.8 21.9 5.22 21.8 5.33 21.6 5.36 20.9 5.15 20.2 4.95 18.8 4.55 13.0 11.8 14.2 3.30 13.4 3.10 12.6 2.90 12.2 2.80 11.8 2.70 11.0 2.5115.0 13.7 22.5 5.28 22.5 5.38 21.6 5.18 20.9 4.98 20.2 4.78 18.8 4.39 15.0 13.7 14.2 3.20 13.4 3.00 12.6 2.81 12.2 2.72 11.8 2.62 11.0 2.44
110%(154)
-19.8 -20.0 11.2 3.59 11.2 3.78 11.1 3.98 11.1 4.08 11.1 4.17 11.0 4.37
60%(84)
-19.8 -20.0 10.9 5.15 10.9 5.26 10.8 5.31 10.5 5.10 10.1 4.90 9.41 4.50-18.8 -19.0 11.5 3.69 11.5 3.88 11.5 4.07 11.4 4.17 11.4 4.26 11.4 4.45 -18.8 -19.0 11.2 5.21 11.2 5.31 10.8 5.11 10.5 4.92 10.1 4.72 9.41 4.34-16.7 -17.0 12.2 3.89 12.2 4.07 12.1 4.25 12.1 4.34 12.1 4.43 12.1 4.61 -16.7 -17.0 11.9 5.32 11.5 5.14 10.8 4.76 10.5 4.58 10.1 4.40 9.41 4.05-14.7 -15.0 12.9 4.06 12.8 4.23 12.8 4.40 12.8 4.49 12.8 4.57 12.7 4.74 -14.7 -15.0 12.2 5.16 11.5 4.80 10.8 4.46 10.5 4.29 10.1 4.13 9.41 3.80-12.6 -13.0 13.5 4.22 13.5 4.38 13.5 4.54 13.4 4.62 13.4 4.70 13.4 4.86 -12.6 -13.0 12.2 4.84 11.5 4.51 10.8 4.20 10.5 4.04 10.1 3.89 9.41 3.59-10.5 -11.0 14.2 4.36 14.2 4.52 14.1 4.67 14.1 4.75 14.1 4.82 14.1 4.98 -10.5 -11.0 12.2 4.56 11.5 4.26 10.8 3.96 10.5 3.82 10.1 3.67 9.41 3.39-9.5 -10.0 14.5 4.43 14.5 4.58 14.5 4.73 14.4 4.80 14.4 4.88 14.4 5.03 -9.5 -10.0 12.2 4.43 11.5 4.14 10.8 3.85 10.5 3.71 10.1 3.58 9.41 3.30-8.5 -9.1 14.8 4.49 14.8 4.63 14.8 4.78 14.7 4.85 14.7 4.93 14.7 5.07 -8.5 -9.1 12.2 4.33 11.5 4.04 10.8 3.76 10.5 3.63 10.1 3.49 9.41 3.23-7.0 -7.6 15.3 4.58 15.3 4.72 15.3 4.86 15.2 4.93 15.2 5.00 15.2 5.14 -7.0 -7.6 12.2 4.16 11.5 3.89 10.8 3.62 10.5 3.49 10.1 3.36 9.41 3.11
-5.0 -5.6 16.0 4.69 16.0 4.82 15.9 4.96 15.9 5.03 15.9 5.10 15.9 5.23 -5.0 -5.6 12.2 3.95 11.5 3.70 10.8 3.45 10.5 3.33 10.1 3.21 9.41 2.97-3.0 -3.7 16.6 4.79 16.6 4.92 16.6 5.05 16.5 5.11 16.5 5.18 16.5 5.31 -3.0 -3.7 12.2 3.78 11.5 3.54 10.8 3.30 10.5 3.19 10.1 3.07 9.41 2.850.0 -0.7 17.6 4.93 17.6 5.05 17.6 5.17 17.5 5.23 17.5 5.30 17.3 5.30 0.0 -0.7 12.2 3.53 11.5 3.31 10.8 3.09 10.5 2.99 10.1 2.88 9.41 2.673.0 2.2 18.6 5.05 18.6 5.16 18.5 5.28 18.5 5.34 18.5 5.40 17.3 4.96 3.0 2.2 12.2 3.33 11.5 3.12 10.8 2.92 10.5 2.82 10.1 2.72 9.41 2.535.0 4.1 19.2 5.12 19.2 5.23 19.2 5.35 19.1 5.40 18.5 5.19 17.3 4.77 5.0 4.1 12.2 3.21 11.5 3.01 10.8 2.82 10.5 2.72 10.1 2.63 9.41 2.447.0 6.0 19.9 5.19 19.8 5.30 19.8 5.41 19.2 5.20 18.5 4.99 17.3 4.58 7.0 6.0 12.2 3.09 11.5 2.90 10.8 2.72 10.5 2.63 10.1 2.54 9.41 2.369.0 7.9 20.5 5.26 20.5 5.36 19.8 5.20 19.2 5.00 18.5 4.80 17.3 4.42 9.0 7.9 12.2 2.99 11.5 2.81 10.8 2.63 10.5 2.54 10.1 2.46 9.41 2.2911.0 9.8 21.1 5.32 21.1 5.41 19.8 5.01 19.2 4.82 18.5 4.63 17.3 4.26 11.0 9.8 12.2 2.89 11.5 2.72 10.8 2.55 10.5 2.47 10.1 2.38 9.41 2.2213.0 11.8 21.8 5.38 21.1 5.20 19.8 4.83 19.2 4.64 18.5 4.46 17.3 4.11 13.0 11.8 12.2 2.80 11.5 2.63 10.8 2.47 10.5 2.39 10.1 2.31 9.41 2.1515.0 13.7 22.3 5.40 21.1 5.03 19.8 4.66 19.2 4.49 18.5 4.31 17.3 3.97 15.0 13.7 12.2 2.72 11.5 2.56 10.8 2.40 10.5 2.32 10.1 2.24 9.41 2.09
100%(140)
-19.8 -20.0 11.1 3.90 11.1 4.08 11.1 4.26 11.1 4.34 11.0 4.43 11.0 4.61
50%(70)
-19.8 -20.0 10.2 4.93 9.58 4.59 9.00 4.27 8.71 4.11 8.42 3.95 7.84 3.65-18.8 -19.0 11.5 4.00 11.4 4.17 11.4 4.34 11.4 4.43 11.4 4.51 11.3 4.69 -18.8 -19.0 10.2 4.75 9.58 4.43 9.00 4.12 8.71 3.97 8.42 3.82 7.84 3.52-16.7 -17.0 12.1 4.17 12.1 4.34 12.1 4.50 12.1 4.58 12.0 4.66 12.0 4.83 -16.7 -17.0 10.2 4.43 9.58 4.14 9.00 3.85 8.71 3.71 8.42 3.57 7.84 3.30-14.7 -15.0 12.8 4.33 12.8 4.49 12.7 4.64 12.7 4.72 12.7 4.80 12.7 4.95 -14.7 -15.0 10.2 4.15 9.58 3.88 9.00 3.62 8.71 3.49 8.42 3.36 7.84 3.11-12.6 -13.0 13.5 4.48 13.4 4.62 13.4 4.77 13.4 4.84 13.4 4.92 13.3 5.06 -12.6 -13.0 10.2 3.91 9.58 3.66 9.00 3.41 8.71 3.29 8.42 3.17 7.84 2.94-10.5 -11.0 14.1 4.61 14.1 4.75 14.1 4.89 14.1 4.96 14.0 5.03 14.0 5.16 -10.5 -11.0 10.2 3.69 9.58 3.46 9.00 3.23 8.71 3.12 8.42 3.01 7.84 2.79-9.5 -10.0 14.5 4.67 14.4 4.80 14.4 4.94 14.4 5.01 14.4 5.08 14.3 5.21 -9.5 -10.0 10.2 3.60 9.58 3.37 9.00 3.15 8.71 3.04 8.42 2.93 7.84 2.72-8.5 -9.1 14.8 4.72 14.7 4.85 14.7 4.99 14.7 5.05 14.7 5.12 14.6 5.25 -8.5 -9.1 10.2 3.51 9.58 3.29 9.00 3.08 8.71 2.97 8.42 2.86 7.84 2.66-7.0 -7.6 15.3 4.80 15.2 4.93 15.2 5.06 15.2 5.12 15.2 5.19 15.1 5.32 -7.0 -7.6 10.2 3.38 9.58 3.17 9.00 2.96 8.71 2.86 8.42 2.76 7.84 2.57-5.0 -5.6 15.9 4.90 15.9 5.03 15.9 5.15 15.9 5.21 15.8 5.27 15.7 5.33 -5.0 -5.6 10.2 3.22 9.58 3.02 9.00 2.83 8.71 2.73 8.42 2.64 7.84 2.45-3.0 -3.7 16.6 4.99 16.5 5.11 16.5 5.23 16.5 5.29 16.5 5.35 15.7 5.08 -3.0 -3.7 10.2 3.09 9.58 2.90 9.00 2.71 8.71 2.62 8.42 2.53 7.84 2.36
0.0 -0.7 17.6 5.12 17.5 5.23 17.5 5.35 17.4 5.36 16.8 5.15 15.7 4.73 0.0 -0.7 10.2 2.90 9.58 2.72 9.00 2.55 8.71 2.47 8.42 2.38 7.84 2.223.0 2.2 18.5 5.23 18.5 5.34 18.0 5.22 17.4 5.02 16.8 4.82 15.7 4.43 3.0 2.2 10.2 2.73 9.58 2.57 9.00 2.41 8.71 2.34 8.42 2.26 7.84 2.115.0 4.1 19.2 5.30 19.1 5.40 18.0 5.01 17.4 4.82 16.8 4.63 15.7 4.26 5.0 4.1 10.2 2.64 9.58 2.49 9.00 2.33 8.71 2.26 8.42 2.18 7.84 2.047.0 6.0 19.8 5.36 19.2 5.20 18.0 4.82 17.4 4.64 16.8 4.45 15.7 4.10 7.0 6.0 10.2 2.55 9.58 2.40 9.00 2.26 8.71 2.19 8.42 2.12 7.84 1.989.0 7.9 20.3 5.37 19.2 5.00 18.0 4.64 17.4 4.47 16.8 4.29 15.7 3.95 9.0 7.9 10.2 2.47 9.58 2.33 9.00 2.19 8.71 2.12 8.42 2.05 7.84 1.9211.0 9.8 20.3 5.17 19.2 4.82 18.0 4.48 17.4 4.31 16.8 4.14 15.7 3.82 11.0 9.8 10.2 2.39 9.58 2.26 9.00 2.12 8.71 2.06 8.42 1.99 7.84 1.8613.0 11.8 20.3 4.98 19.2 4.64 18.0 4.31 17.4 4.15 16.8 3.99 15.7 3.68 13.0 11.8 10.2 2.32 9.58 2.19 9.00 2.06 8.71 2.00 8.42 1.93 7.84 1.8115.0 13.7 20.3 4.81 19.2 4.49 18.0 4.17 17.4 4.02 16.8 3.87 15.7 3.57 15.0 13.7 10.2 2.26 9.58 2.13 9.00 2.00 8.71 1.94 8.42 1.88 7.84 1.76
90%(126)
-19.8 -20.0 11.1 4.21 11.0 4.37 11.0 4.53 11.0 4.61 11.0 4.69 11.0 4.85TC: Total capacity: kWPI: Power input: kW (Compressor+Outdoor fan motor)
-18.8 -19.0 11.4 4.30 11.4 4.46 11.4 4.61 11.3 4.69 11.3 4.77 11.3 4.92-16.7 -17.0 12.1 4.46 12.1 4.61 12.0 4.75 12.0 4.83 12.0 4.90 12.0 5.05-14.7 -15.0 12.7 4.61 12.7 4.74 12.7 4.88 12.7 4.95 12.7 5.02 12.6 5.16-12.6 -13.0 13.4 4.73 13.4 4.87 13.4 5.00 13.3 5.06 13.3 5.13 13.3 5.26-10.5 -11.0 14.1 4.85 14.1 4.98 14.0 5.10 14.0 5.17 14.0 5.23 14.0 5.35-9.5 -10.0 14.4 4.91 14.4 5.03 14.4 5.15 14.3 5.21 14.3 5.27 14.1 5.29-8.5 -9.1 14.7 4.95 14.7 5.07 14.7 5.19 14.6 5.25 14.6 5.31 14.1 5.15-7.0 -7.6 15.2 5.03 15.2 5.14 15.2 5.26 15.1 5.32 15.1 5.38 14.1 4.95-5.0 -5.6 15.9 5.12 15.9 5.23 15.8 5.34 15.7 5.33 15.2 5.11 14.1 4.69-3.0 -3.7 16.5 5.20 16.5 5.31 16.2 5.28 15.7 5.08 15.2 4.87 14.1 4.480.0 -0.7 17.5 5.32 17.2 5.30 16.2 4.91 15.7 4.72 15.2 4.54 14.1 4.183.0 2.2 18.3 5.32 17.2 4.96 16.2 4.60 15.7 4.43 15.2 4.26 14.1 3.92
5.0 4.1 18.3 5.11 17.2 4.76 16.2 4.42 15.7 4.26 15.2 4.09 14.1 3.777.0 6.0 18.3 4.91 17.2 4.58 16.2 4.26 15.7 4.10 15.2 3.94 14.1 3.649.0 7.9 18.3 4.73 17.2 4.41 16.2 4.10 15.7 3.95 15.2 3.80 14.1 3.5111.0 9.8 18.3 4.56 17.2 4.26 16.2 3.96 15.7 3.82 15.2 3.67 14.1 3.3913.0 11.8 18.3 4.39 17.2 4.10 16.2 3.82 15.7 3.68 15.2 3.55 14.1 3.2815.0 13.7 18.3 4.25 17.2 3.97 16.2 3.70 15.7 3.57 15.2 3.43 14.1 3.18
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 232/308
Capacity Tables EDMT34-635A
226 RX(Y)MQ-P
9.3 Capacity Correction Factor
RX(Y)MQ4PVE/RX(Y)MQ5PVE
C
: 3 D 0 4 5 7 1 0 E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 233/308
EDMT34-635A Capacity Tables
RX(Y)MQ-P 227
12
RX(Y)MQ6PVE
C :
3 D 0 4 5 9 6 1 E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 234/308
Capacity Tables EDMT34-635A
228 RX(Y)MQ-P
9.4 Notes for Heating Capacity Characteristics (Heat Pump)
The tables do not take account of the reduction in capacity when frost has accumulated or while the defrosting
operation is in progress.
The capacity values which take these factors into account, in other words the integrated heating capacity values,
can be calculated as follows:
FormulaIntegrated heating capacity = A
Value given in table of capacity characteristics = B
Integrating correction factor for frost accumulation = C
A=B×C
Correction factor for finding integrated heating capacity
Note:
It will be seen from the figure above that the integrated heating capacity expresses the integrated heating capacity for
a single cycle (from defrost operation to defrost operation) in terms of time.
Please take note that when there is an accumulation of snow against the outside surface of the outdoor unit heat
exchanger there will always be a temporary reduction in capacity although this will, of course, vary in degree in
accordance with a number of other factors such as the outdoor temperature (°CDB), relative humidity (RH) and
the amount of frosting which occurs.
Inlet port temperature of heat exchanger (°C / RH 85%) -7 -5 -3 0 3 5 7
Integrating correction factor for frost accumulation 0.95 0.93 0.88 0.84 0.85 0.90 1.00
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 235/308
EDMT34-635A Operation Limits
RX(Y)MQ-P 229
12
10.Operation Limits
10.1 Heat Pump
RXYMQ4PVE/RXYMQ5PVE/RXYMQ6PVE
3D045713E
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 236/308
Operation Limits EDMT34-635A
230 RX(Y)MQ-P
10.2 Cooling Only
RXMQ4PVE/RXMQ5PVE/RXMQ6PVE
3D052715A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 237/308
EDMT34-635A Sound Levels
RX(Y)MQ-P 231
12
11.Sound Levels
11.1 Overall
11.2 Octave Band Level
dB(A) dB(A)
Power Supply 220-230V/220V, 50/60Hz Power Supply 220-230V/220V, 50/60Hz
Model Cooling Heating Model Cooling
RXYMQ4PVE 50 52 RXMQ4PVE 50
RXYMQ5PVE 51 53 RXMQ5PVE 51
RXYMQ6PVE 53 55 RXMQ6PVE 53
RX(Y)MQ4PVE (Cooling) RXYMQ4PVE (Heating)
RX(Y)MQ5PVE (Cooling) RXYMQ5PVE (Heating)
RX(Y)MQ6PVE (Cooling) RXYMQ6PVE (Heating)
4D045713E
4D052713E 4D052719E
4D052714K 4D052718K
4D052716H 4D052717H
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 238/308
Accessories EDMT34-635A
232 RX(Y)MQ-P
12.Accessories
12.1 Optional Accessories
RX(Y)MQ4PVE/RX(Y)MQ5PVE/RX(Y)MQ6PVE
C: 3D045727D
Optional accessories
RXYMQ4PVE, RXMQ4PVE
RXYMQ5PVE, RXMQ5PVERXYMQ6PVE, RXMQ6PVE
Cool/Heat Selector KRC19-26A
Fixing box KJB111A
D i s t r i b u
t i v e
P i p i n g Refnet header
KHRP26M22H, KHRP26M33H(MAX. 4 branch) (MAX. 8 branch)
Refnet joint KHRP26A22T
Central drain plug KKPJ5F180
Fixture for preventing overturning KPT-60B160
Wire fixture for preventing overturning K-KYZP15C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 239/308
EDMT34-635A
Installation of Outdoor Units 233
13
Part 4
Installation of
Outdoor Units
1. Centre of Gravity.................................................................................234
2. Installation Manual ..............................................................................2352.1 RXYMQ-PVE (Heat Pump) ..................................................................235
2.2 RXMQ-PVE (Cooling Only) ..................................................................252
3. REFNET Pipe System.........................................................................2693.1 Layout Example....................................................................................269
3.2 Max. Refrigerant Piping Length............................................................2703.3 Field Refrigerant Piping........................................................................271
3.4 REFNET Joints and Headers...............................................................272
4. REFNET Joint and Header .................................................................2744.1 REFNET Joint (Branch Kit) ..................................................................274
4.2 REFNET Header (Branch Kit) ..............................................................277
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 240/308
Centre of Gravity EDMT34-635A
234 Installation of Outdoor Units
1. Centre of Gravity
RX(Y)MQ4PVE/RX(Y)MQ5PVE/RX(Y)MQ6PVE
4D052604A
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 241/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 235
13
2. Installation Manual
2.1 RXYMQ-PVE (Heat Pump)
3PN07193-2B
figure 1
23
4
2
1
≥ 1 , 0 0 0
≥ 1
, 0 0 0
≥ 1 ,
5 0 0
≥1,5 0 0
≥1,5 0 0
[1] [2]
[3] 1 0
0 o r
m o r e
1 0 0
o r m o r e
3 0 0 o r
m o r e
1 0 0 o r m o r e
1 0 0 o r m o r e
2 0 0 o r m o r e
1 0 0 o r m o r e
figure 4
figure 7
1
2
4 5
6 7
8
3
figure 2
1
2
3
4
5
6
5
figure 3
[1] [2]
[3]
1 0 0
o r m o r e
1 5 0 o r
m o r
e
5 0 0
o r
m o r e
1000 ormore
1 5 0 o r m o r e 1 5 0 o r m o r e
1000 ormore
500 ormore
500 ormore
1000 ormore
1 0 0 0 o r m o r e
2 0 0 o r m o r e 3 0
0 o r
m o r e
figure 5
[1] [2]
[3] [4]
5 0 0
o r m o r e
5 0 0 o
r
m o r e
5 0 0
o r
m o r e
5 0 0 o r m
o r e
1 0 0 0
o r m o r e
1 0 0 0
o r m
o r e
1000 ormore
1000 ormore
figure 6
[1] [2]
L
L L
A A
L
H
H H
H
5 0 0
o r
m o r e
2 5 0
o r
m o r e 3 0
0 o r
m o r e
5 0 0
o r
l e s s 5 0
0 o r
l e s s
1 0 0
o r
m o r e
3 0 0
o r
m o r e
1 0 0 0
o r m
o r e
L > HL > H
[3] [4]
1000 ormore 1000 or
more
figure 7
[5] [6] [7] [8]
L
L
LL
HH
H H
AA A 5 0
0 o r
m o r e
5 0 0
o r
m o r e
5 0 0
o r
m o r e
1 0 0
o r
m o r e
1 0 0 0
o r
m o r e
1 0 0 0
o r
m o r e
1 5 0 0
o r
m o r e
1000 ormore
1000 ormore
L > H
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 242/308
Installation Manual EDMT34-635A
236 Installation of Outdoor Units
3PN07193-2B
[1]
[2]
Z
Z
1 0 0 0
o r m
o r e
3 0 0
o r m o r e
100
100
figure 8 figure 9
1
2
22
3
3
9
10
11
3
7
4
5
5
68
figure 16
1 4
2
3
L N
11
910
8
7
6
5
5
[1]
[2]
1 0 0 0
o r
m o r e
2 0 0 0
o r
m o r e
2 0 0
o r
m o r e
1 0 0 o r
m o r e
1 5 0 0
o r
m o r e
6 0 0
o r
m o r e
3 0 0 0
o r
m o r e
H
A
L
1
20
figure 10
1
2
7
3
4
65
1
2
3
140 140
421
45
612
620
3 5 0 2
1 9 1
1 7
3 0
2 9 0
( 3 4 5 ~ 3 5 5 )
12
3
4
5
6
7
2
1
5
3
4
3
5
6 6 6
4 4 4
7 7 78 8 8
figure 12
figure 11
figure 13
figure 14
figure 15
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 243/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 237
13
3PN07193-2B
F1F2
F1TOIN/DUNIT TO OUT/D UNIT
F2 F1 F 2
F1 F2 F1 F2
1
2
3
4
1
2
3
56
8
47
1
2 3
4
5
[1] [2] [3] [4]1
22
2 233
4
5
4
5
63
3
4
4655
1 1 1
figure 25
1
2
34
5
678
figure 29
1 23
4
4
56
figure 30
figure 17
figure 21
figure 31
F2F1 F2F1 F2F1
F2F1 F2F1
1 2
3
figure 18 figure 19
1
7
2
2
8
3
4
5
6
B
A
figure 20
12
34
4
12
figure 22 figure 23 figure 24
1
2
1
2
3
4 5
6
1
2
3
4
5
6
7
11 89
10
figure 26 figure 27 figure 28
101
2
3
4
56
7
89
1
2 3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 244/308
Installation Manual EDMT34-635A
238 Installation of Outdoor Units
3PN07193-2B
1 English
RXYMQ4PVE
RXYMQ5PVE
RXYMQ6PVEVRVIII-S System air conditioner Installation manual
CONTENTS
1. SAFETY CONSIDERATIONS..................................................12. INTRODUCTION......................................................................2
2-1. Combination......................................................................22-2. Standard operation limit ....................................................22-3. Spec list ............................................................................22-4. Electrical properties ..........................................................22-5. Standard supplied accessories.........................................32-6. Option accessory ..............................................................3
3. BEFORE INSTALLATION........................................................3
4. SELECTING INSTALLATION SITE......................................... 3
5. PRECAUTIONS ON INSTALLATION ......................................4
6. FIELD WIRING ........................................................................5
6-1. Wiring connection example for whole system................... 56-2. How to lay the power supply wiring and
transmission wiring ...........................................................66-3. How to connect the power supply wiring...........................66-4. Interunit wiring connection procedure ...............................6
7. PRECAUTIONS ON REFRIGERANT PIPING......................... 7
7-1. Installation tools ................................................................ 77-2. Selecting piping material...................................................77-3. Protection against contamination when installing pipes.... 77-4. Pipe connection ................................................................77-5. Connecting the refrigerant piping...................................... 77-6. Heat insulation of piping....................................................87-7. Example of connection......................................................97-8. Air tight test and vacuum drying......................................10
8. ADDITIONAL REFRIGERANT CHARGE ..............................11
8-1. Before adding refrigerant ................................................118-2. Checking the refrigerant tank.......................................... 118-3. Adding refrigerant ...........................................................11
9. POST-WORK CHECKS.........................................................11
10. TEST RUN ............................................................................. 11
10-1.Power On–Check Operation .......................................... 1110-2.Temperature control operation checklist........................ 12
11. CAUTION FOR REFRIGERANT LEAKS............................... 13
1. SAFETY CONSIDERATIONSPlease read this “SAFETY CONSIDERATIONS” carefully before
installing air conditioning equipment and be sure to install it correctly.
This manual classifies precautions into WARNINGS and CAUTIONS.
Be sure to follow all precautions below: they are all important for
ensuring safety.
After completing the installation, make sure that the unit operates
properly during the start-up operation.
Please instruct the customer on how to operate the unit and keep it
maintained.
Also, inform customers that they should store this installation manual
along with the operation manual for future reference.
This air conditioner comes under the terms “appliances not accessi-
ble to the general public”.
Safety Precaution
VRV System is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
Meaning of warning and caution symbols.
Warning ........Failure to observe a warning may result in death
or serious injury.
Caution .........Failure to observe a caution may result in injury
or damage to the unit.
Warning
• Ask your dealer or qualified personnel to carry out installation
work. Do not try to install the machine yourself.
Improper installation may result in water leakage, electric shocks or fire.
• Perform installation work in accordance with this installation manual.
Improper installation may result in water leakage, electric shocks
or fire.
• Steps must be taken to prevent the critical concentration from
being exceeding in case the refrigerant leaks when the unit is
installed in a small room. Consult your dealer about ways to avoid
exceeding the critical concentration.
If the refrigerant does leak and the critical concentration is
breached, the room may become deprived of oxygen.
• Be sure to use only the specified accessories and parts for instal-
lation work.
Failure to use the specified parts may result in water leakage,
electric shocks, fire or the unit falling.
• Install in a location which can fully support the weight of the unit.
Insufficiently strong locations will cause the unit to drop and
cause injury.
• Carry out the specified installation work after taking into account
strong winds, typhoons or ear thquakes.
Improper installation work may result in the equipment falling and
causing accidents.
• Electrical wiring work should be done in compliance with all local
laws, specifications, and this manual. Dedicated power supply
wiring should be used.
Insufficient capacity in the power supply wiring or incorrect wiring
work may cause electric shock or fire.
• Make sure that all wiring is secured, the specified wires and used,
and no external forces act on the terminal connections or wires.
Improper connections or installation may result in fire.
• Wiring between indoor and outdoor units and for the power wiring
should be laid out and securely attached with an outer panel so it
does not force the service lid or other par ts out of place.
Otherwise this may cause the terminal board to get hot, electricshock, or fires.
• If the refrigerant gas leaks during installation, ventilate the area
immediately.
Toxic gas may be produced if the refrigerant gas comes into con-
tact with fire.
• After completing the installation work, check that the refrigerant
gas does not leak.
Toxic gas may be produced if the refrigerant gas leaks into the
room and comes into contact with a source of fire, such as a fan
heater, stove or cooker.
• Always shut off the power before touching any electrical parts.
• Be sure to establish an earth.
Do not earth the unit to a utility pipe, arrester, or telephone earth.
Incomplete earth may cause electrical shock, or fire.
A high surge current from lightning or other sources may cause
damage to the air conditioner.
• Be sure to install an earth leakage breaker.Failure to install an earth leakage breaker may result in electric
shocks, or fire.
Caution
• Drain pipes should be laid following the explanation in this instal-
lation manual to achieve proper drainage and should be insulated
to prevent condensation.
Improper drain work may cause leaks, damaging furniture, etc.
• Install the indoor and outdoor units, power supply wiring and con-
necting wiring at least 1 meter away from televisions or radios in
order to prevent image interference or noise.
• Do not install the air conditioner in the following locations:
(a) where a mineral oil mist or an oil spray or vapor is produced,
for example in a kitchen.
Plastic parts may deteriorate and fall off or result in water leakage.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 245/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 239
13
3PN07193-2B
English 2
(b) where corrosive gas, such as sulfurous acid gas, is produced.
Corroding copper pipes or soldered parts may result in refrig-
erant leakage.
(c) near machinery emitting electromagnetic waves.
Electromagnetic waves may disturb the operation of the con-
trol system and result in a malfunction of the equipment.
(d) where flammable gases may leak, where there are carbon
fiber or ignitable dust suspensions in the air, or where volatileflammables such as thinner or gasoline are handled.
Operating the unit in such conditions may result in fire.
(e) Make sure to provide for adequate measures in order to pre-
vent that the outdoor unit be used as a shelter by small animals.
Small animals making contact with electrical parts can cause
malfunctions, smoke or fire. Please instruct the customer to
keep the area around the unit clean.
• Do not mount or place objects on the outdoor unit.
Falling and tipping may cause injury.
• Do not wash outdoor or indoor units with water.
This may cause electric shock or fire.
Disposal requirements
Dismanting of the unit, treatment of the refrigerant, oil and even-
tual other parts, shold be done in accordance with the relevant
local and national regulations.
Caution
See the indoor unit’s installation manual for indoor unit and theremote controller installation.
2. INTRODUCTION
1. This series uses R410A new refrigerant. Be absolutely sure to
comply with “7. PRECAUTIONS ON REFRIGERANT PIPING”,
because even greater caution is needed to prevent impurities
from entering R410A (mineral oils and water).
2. The design pressure is 4.0MPa (2.8MPa for R22), which means
that piping may be thicker than conventionally, so please refer to
“7. PRECAUTIONS ON REFRIGERANT PIPING”.
3. This is a mixed refrigerant, so charge as a liquid when adding
refrigerant.
(If charged as a gas, the composition of the refrigerant may
change, preventing normal operation.)
4. The indoor unit must use R410A. See the catalog for indoor unit
models which can be connected. (Normal operation is not possi-
ble when connected to other units.)
5. The power supply of this series is single-phase, 230 to 240V
(50Hz) in the model ~PV4A, and single-phase, 220 to 230V/220V
(50/60Hz) in the model ~PVE.
2-1 Combination
The indoor units can be installed in the following range.• Be sure to connect a dedicated indoor unit. See the catalog
for indoor unit models which can be connected.
• Total capacity/quantity of indoor units
⟨Outdoor unit⟩ ⟨Total capacity of indoor units⟩ ⟨Total quantity of i ndoor units⟩
RXYMQ4PVE..............................50 ~
130 6 unitsRXYMQ5PVE....................... 62.5 ~ 162.5 8 unitsRXYMQ6PVE..............................70 ~ 182 9 units
2-2 Standard operation limit
Normal operation
The figures below assume following operating conditions for indoor
and outdoor units:
Equivalent pipe length..........................................................7.5mLevel difference ....................................................................0m
Cooling Heating (H/P model only)
A Outdoor temperature (°CDB)B Indoor temperature (°CWB)C Outdoor temperature (°CWB)D Indoor temperature (°CDB)
Range for continuous operation
Range for pull down operation
Range for warming up operation
Operation range (performance is not guaranteed)
2-3 Spec list
For operating conditions marked with a *(a)(b) in the table, see “2-2
Standard operation limit”.
2-4 Electrical properties
For operating conditions marked with a *(c) in the table, see “2-2
Standard operation limit”.
Model name H/P RXYMQ4PVE RXYMQ5PVE RXYMQ6PVE
RemarksRefrigerant type R410A
Power supply 1 phase 230-240V 50Hz
Cooling performance (kW) 11.2 14.0 15.5 * (a)
Heating performance (kW) 12.5 16.0 18.0 * (b)
Energy use during cooling (kW) 3.55 4.75 5.11 * (a)
Energy use during heating (kW) 3.70 4.29 4.97 * (b)
External dimensions(width × depth × height) (mm) 1345 × 900 × 320
Mass (kg) 125
Connec-tion pip-ing
Gas line piping(inch)(mm)
5/8φ 15.9
5/8φ 15.9
3/4φ 19.1
Liquid line piping(inch)(mm)
3/8φ 9.4
3/8φ 9.4
3/8φ 9.4
Model name H/P RXYMQ4PVE RXYMQ5PVE RXYMQ6PVE Remarks
Phase ~
Frequency (Hz) 50Hz
Voltage (V) 230-240V
Voltage tolerance range (%) ±10
Rated current for fuses (A) 30
Maximum outdoor unit operat-ing current (A) 27 * (c)
1914 25
5
–2010 20
–15
C
10
6
27
A
–5
1528
10
(a)35
46 15.5
B D
(c)
(b)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 246/308
Installation Manual EDMT34-635A
240 Installation of Outdoor Units
3PN07193-2B
3 English
2-5 Standard supplied accessories
Make sure that the accessories shown below are all present.
(The accessories can be found behind the front panel.)
(Refer to figure 31)1. Accessories
2. Screw for front panel
3. Front panel
2-6 Option accessory
• Refrigerant branching kit
* See “7. PRECAUTIONS ON REFRIGERANT PIPING” for
details on how to connect refrigerant branch kits and how many
are needed.
3. BEFORE INSTALLATION
<Transporting the Unit>
As shown in figure 2, bring the unit slowly. (Take care not to let hands
or things come in contact with rear fins.)
(Refer to figure 2)1. Air outlet grille
2. Intake hole
3. Corner
4. Outdoor unit
5. Handle
6. Front
7. Rear
8. Always hold the unit by the corners, as holding it by the
side intake holes on the casing may cause them to
deform.
Use only accessories and parts wh ich are of the designated specifi-
cation when installing.
4. SELECTING INSTALLATION SITE
(1) Select an installation site where the following conditions are
satisfied and that meets with your customer’s approval.
• Places which are well-ventilated.
• Places where the unit does not bother next-door neighbors.
• A locations where small animals will not make nests in the unit.
• Safe places which can withstand the unit’s weight and vibration
and where the unit can be installed level.
• Locations not exposed to rain.
• A locations where there is enough space to install the unit.
• Places where the indoor and outdoor unit’s piping and wiring
lengths come within the allowable ranges.
• A location where there is no risk of flammable gas leaking.
(2) If the unit is installed in a location where it might be
exposed to strong wind, install as per figure 3.
• 5m/sec or more strong wind blown against the outdoor unit’s air
outlet causes the outdoor unit to deteriorate in air capacity and
suck in the air blown out of its air outlet (short circuit), and the fol-
lowing effects may result.
• Drop in performance.
• Increased frost formation in heating mode.• Shutting down due to increase in pressure.
• If very strong wind blows continuously on the side of the outdoor
unit with the outlet vent, the fan may turn in reverse at high
speed and break, so install as per figure 3.
(Refer to figure 3)1. Turn the air outlet side toward the building’s wall, fence or
windbreak screen.
2. Air inlet grille
3. Ensuring there is enough space for installing the unit.
4. Set the outlet side at a right angle to the direction of the
wind.
5. Strong wind
6. Blown air
(3) In installing the unit in a place frequently exposed to snow,
pay special attention to the following:
• Elevate the foundation as high as possible.• Attach the snow hood (field supply).
• Remove the rear inlet grille to prevent snow from accumulating
on the rear fins.
(4) The outdoor unit may short circuit depending on its environment,
so use the louvers (field supply).
(5) The refrigerant gas (R410A) is a safe, non-toxic and non-flam-
mable gas, but if it leaks into the room, the concentration may
exceed tolerance levels, especially in small rooms, so steps need
to be taken to prevent refrigerant leakage. See the equipment
design reference for details.
(6) Inverter-type air conditioners sometimes cause static in other
electrical appliances.
When selecting an installation location, make sure the air condi-
tioner and all wiring are sufficiently far away from radios, comput-
ers, stereos, and other appliances, as shown in figure 1.
Particularly for locations with weak reception, ensure there is adistance of at least 3 meters for indoor remote controllers, place
power supply wiring and interunit wiring in conduits, and ground
the conduits. Use shielded wire for interunit wiring.
(Refer to figure 1)1. Indoor unit
2. Branch switch (ground-fault circuit interrupter)
3. Remote controller
4. Personal computer or radio
(7) Space needed for installation
<Precautions when installing units in series>
• The direction for interunit piping is either forward or down when
installing units in series, as shown in the figure.
• If the piping is brought out from the back, the outdoor unit will
require at least 250 mm from its right side.
(All figures represent millimeters.)
(7)-1 IN CASE OBSTACLES EXIST ONLY IN FRONT OF THEAIR INLET
When nothing is obstructing the top
1. Installation of single unit
• In case obstacles exist only in front of the air inlet
(Refer to figure 4-[1])
• In case obstacles exist in front of the air inlet and on both sides
of the unit (Refer to figure 4-[2])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row
• In case obstacles exist in front of the air inlet and on both sides
of the unit (Refer to figure 4-[3])
NameOperation man-
ualClamp Others
Quantity 1 2 pcs.
• Installation manualShape
Only comes with Q6 model
NameGas side
accessory pipe (1)
Gas side
accessory pipe (2)
Gas side
accessory pipe (3)
Quantity 1 pc. 1 pc. 1 pc.
Shape
REFNET joint KHRP26M22T
REFNET header KHRP26M22H KHRP26M33H
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 247/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 241
13
3PN07193-2B
English 4
When something is obstructing the top
1. Installation of single unit
• In case obstacles exist only in front of the air inlet
(Refer to figure 5-[1])
• In case obstacles exist in front of the air inlet and on both sides
of the unit (Refer to figure 5-[2])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row• In case obstacles exist in front of the air inlet and on both sides
of the unit (Refer to figure 5-[3])
(7)-2 IN CASE OBSTACLES EXIST IN FRONT OF THE OUTLET
SIDE
When nothing is obstructing the top
1. Installation of single unit (Refer to figure 6-[1])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 6-[2])
When something is obstructing the top
1. Installation of single unit (Refer to figure 6-[3])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 6-[4])
(7)-3 IN CASE OBSTACLES EXIST IN FRONT OF BOTH THE
AIR INLET AND OUTLET SIDES
Pattern 1: Where obstacle in front of the air outlet is higher than theunit.
(There is no height limit for obstructions on the intake side.)
When nothing is obstructing the top
1. Installation of single unit (Refer to figure 7-[1])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 7-[2])
When something is obstructing the top
1. Installation of single unit (Refer to figure 7-[3])
Relation of dimensions of H, A, and L are shown in the table below.
Note)
Get the lower part of the frame sealed so that air from the outletdoes not bypass.
2. Series installation (up to two units) (Refer to figure 7-[4])
Relation of dimensions of H, A, and L are shown in the table
below.
Note)
1. Get the lower part of the frame sealed so that air from the out-
let does not bypass.
2. Only two units at most can be installed in series.
Pattern 2: Where obstacles in front of the air outlet is lower than the
unit.
(There is no height limit for obstructions on the intakeside.)
When nothing is obstructing the top
1. Installation of single unit (Refer to figure 7-[5])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 7-[6])
Relation of dimensions of H, A, and L are shown in the table
below.
When something is obstructing the top
1. Installation of single unit (Refer to figure 7-[7])
Relation of dimensions of H, A, and L are shown in the table
below.
Note)
Get the lower part of the frame sealed so that air from the outlet
does not bypass.
2. Series installation (up to two units) (Refer to figure 7-[8])
Relation of dimensions of H, A, and L are shown in the table
below.
Note)
1. Get the lower part of the frame sealed so that air from the out-
let does not bypass.
2. Only two units at most can be installed in series.(7)-4 IN CASE OF STACKED INSTALLATION
1. In case obstacles exist in front of the outlet side
(Refer to figure 8-[1])
Note)
1. No more than two units should be stacked.
2. About 100 mm is required as the dimension for laying the
upper outdoor unit’s drain pipe.
3. Shut off the Z part (the area between the upper outdoor unit
and the lower outdoor unit) so that outlet air does not bypass.
2. In case obstacles exist in front of the air inlet (Refer to figure 8-[2])
Note)
1. No more than two units should be stacked.
2. About 100 mm is required as the dimension for laying the
upper outdoor unit’s drain pipe.
3. Shut off the Z part (the area between the upper outdoor unit
and the lower outdoor unit) so that outlet air does not bypass.
(7)-5 IN CASE OF MULTIPLE-ROW INSTALLATION (FOR ROOF
TOP USE, ETC.)
1. In case of installing one unit per row (Refer to figure 9-[1])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 9-[2])
Relation of dimensions of H, A, and L are shown in the table
below.
5. PRECAUTIONS ON INSTALLATION
• Install making sure the unit is level and the foundation is sturdy
enough to prevent vibration noise.
• In accordance with the foundation drawing in figure 10, fix the unit
securely by means of the foundation bolts.
(Prepare four sets of M12 foundation bolts, nuts and washers
each which are available on the market.)
• The foundation bolts should be inserted 20 mm.
(Refer to figure 10)1. Diagram of lower surface
L A
L ≤ H0 < L ≤ 1/2H 750
1/2H < L ≤ H 1000
H < L Set the frame to be L ≤ H
L A
L ≤ H0 < L ≤ 1/2H 1000
1/2H < L ≤ H 1250
H < L Set the frame to be L ≤ H
L A
0 < L ≤ 1/2H 250
1/2H < L ≤ H 300
L A
L ≤ H0 < L ≤ 1/2H 100
1/2H < L ≤ H 200H < L Set the frame to be L ≤ H
L A
L ≤ H0 < L ≤ 1/2H 250
1/2H < L ≤ H 300
H < L Set the frame to be L ≤ H
L A
L ≤ H0 < L ≤ 1/2H 250
1/2H < L ≤ H 300
H < L Installation impossible.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 248/308
Installation Manual EDMT34-635A
242 Installation of Outdoor Units
3PN07193-2B
5 English
<Drain pipe disposal>
• Locations where drainage from the outdoor unit might be a prob-
lem.
In such locations, for example, where the drainage might drip onto
passersby, lay the drain piping using the separately sold drain
plug.
• When laying the drain, at least 100 mm from the bottom of the out-
door unit is needed.• Make sure the drain works properly.
(Watch out for water leaks if piping is brought out the bottom.)
(Refer to figure 11)1. Drain plug
2. 4 tabs
3. Drain receiver
4. Insert the drain receiver as far as possible into the drain
plug and hook the tabs.
5. Bottom frame drain hole
6. (1) Insert the drain plug through the drain hole in the
bottom frame shown in figure 12.
(2) Turn the drain plug along the guides until it stops
(approx. 90°), and then attach the bottom frame.
7. Guide
(Refer to figure 12)
1. Air outlet side
2. Diagram of lower surface (Unit: mm)
3. Drain hole
[How to remove the transport clasp]
• A yellow transport clasp and washer are attached to the legs of
the compressor to protect the unit during transportation, so
remove them as shown in figure 13.
(Refer to figure 13)1. Compressor
2. Securing nut
3. Washer
4. Transport clasp
5. Turn in the direction of the arrow and remove.
6. Sound-proof cover
7. Do not remove with the cover open.
(1) Open the sound-proof cover as shown in figure 13.
Do not pull the sound-proof cover or remove it from the compres-
sor.
(2) Remove the securing nut.
(3) Remove the washer.
(4) Remove the transport clasp as shown in figure 13.
(5) Retighten the securing nut.
(6) Return the sound-proof cover as it was.
6. FIELD WIRING
Caution
To the electrician
• Do not operate until refrigerant piping work is completed.
(If operated before complete the piping work, the compressor
may be broken down.)
• Be sure to install an earth leakage circuit breaker.
(This unit uses an inverter, so install the earth leakage circuit
breaker that be capable of handling high harmonics in order to
prevent malfunctioning of the earth leakage circuit breaker
itself.)
6-1 Wiring connection example for whole system
• Electrical wiring work should be done by a certified professional.
• Follow the “Electrical wiring diagram face plate” when carrying out
any electrical wiring.
Only proceed with wiring work after blocking off all power.
• Make sure the ground resistance is no greater than 4Ω .
• Attach a ground-fault circuit interrupter.
• Ground the indoor and outdoor units.
• Do not connect the ground wire to gas pipes, sewage pipes, light-
ning rods, or telephone ground wires.
• Gas pipes: can explode or catch fire if there is a gas leak.
• Sewage pipes: no grounding effect is possible if hard plastic
piping is used.
• Telephone ground wires and lightning rods: dangerous
when struck by lightning due to abnormal rise in electrical poten-
tial in the grounding.
• Use copper wire.
• When doing the electrical wiring, always shut off the power source
before working, and do not turn on the switch until all work is com-
plete.
• This unit has an inverter, so it must be grounded in order to reduce
noise and prevent it affecting other appliances, and also to
release any electrical build-up in the unit case due to leaked cur-
rent.• Do not install a power-factor improving phase-advancing capaci-
tor under any circumstances.
(Not only will this not improve the power factor, but it might cause
a fire.)
• Connect the wire securely using designated wire and fix it with
attached clamp without applying external pressure on the termi-
nal parts (terminal for power wiring, terminal for transmission wir-
ing and earth terminal). See “6-3 How to connect the power
supply wiring”.
• Left-over wiring should not be wrapped and stuffed into the unit.
• To prevent the power wiring from being damaged by the knock
hole edges, put it in a w iring pipe or plastic tube to protect it.
• Secure the wiring with the included clamp so that it does not come
in contact with the piping or shutoff valve.
(See “6-3 How to connect the power supply wiring”.)
Caution
• Use a power wire pipe for the power supply wiring.
• Outside the unit, make sure the weak electric wiring (i.e. for the
remote controller cord, between units, etc.) and the strong elec-
tric wiring do not pass near each other, keeping them at least
50 mm apart.
Proximity may cause electrical interference, malfunctions, and
breakage.
• Be sure to connect the power wiring to the power wiring terminal
block and secure it as described in “6-3 How to connect the
power supply wiring”.
• Interunit wiring should be secured as described in “6-4 Inter-
unit wiring connection procedure”.
• Secure wiring with clamp (accessory) to avoid contact with pip-
ing.
• Make sure the wiring and the front panel do not stick up above
the structure, and close the cover firmly.
(Refer to figure 14)1. Branch switch and over-current interrupter (ground-fault
circuit interrupter)
2. Power supply
3. Outdoor unit
4. 16V
5. 220-240V
6. Indoor unit
7. Remote controller.
8. Ground wire
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 249/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 243
13
3PN07193-2B
English 6
6-2 How to lay the power supply wiring and trans-
mission wiring
Pass the power supply wiring (including the ground wire) through the
holes on the side, front, or back of the unit.
The interunit wiring should be passed through the wiring hole, the
piping out-hole, or the knock hole on the front of the unit.
Precautions when knocking out knock holes• Open the knock holes with a hammer or the like.
• After knocking out the holes, we recommend you remove burrs in
the knock holes and paint the edges and areas around the edges
using the repair paint to prevent rusting.
• When passing wiring through knock holes, make sure there are
no burrs, and protect the wiring with protective tape.
(Refer to figure 15)
1. Shutoff valve attachment plate
2. Interunit wiring
3. Connecting electrical wiring (including ground wire)
4. Backward5. Knockout hole
6. Sideways
7. Set apart
8. Forward
9. Clamp (accessory)
10. Terminal block
11. Control box
<Precautions when laying power wiring>
• Wiring of different thicknesses cannot be connected to the power
terminal block.
(Slack in the power wiring may cause abnormal heat.)
• Use sleeve-insulated round pressure terminals for connections to
the power terminal block. When none are available, connect wire
of the same diameter to both sides, as shown in the figure.
Follow the instructions below if the wiring gets very hot due to
slack in the power wiring.
• For wiring, use the designated power wire and connect firmly,
then secure using the included clamping material to prevent out-side pressure being exerted on the terminal board.
• Use an appropriate screwdriver for tightening the terminal screws.
A screwdriver with a small head will strip the head and make
proper tightening impossible.
• Over-tightening the terminal screw may break it.
See the table below the tightening torque of the terminal screws.
6-3 How to connect the power supply wiring
Caution
Attach a ground-fault circuit interrupter.
• A ground-fault circuit interrupter is required in order to prevent
electric shock and fires.
Caution
• The wiring should be selected in compliance with local specifi-
cations. See the table above.
• Comply with IEC60245 as regards individual specifications for
local power supply wiring.
• Use H05VV as the power supply wiring if a wiring conduit is
being used.• If a conduit cannot be used, then use H07RNF.
• Always turn off the power before doing wiring work.
• Grounding should be done in compliance with local laws and
regulations.
• Attach a ground-fault circuit interrupter.
(This unit has an inverter, so an interrupter capable of handling
high frequencies is needed to prevent malfunction of the inter-
rupter itself.)
• As shown in figure 16, when connecting the power supply wiring
to the power supply terminal block, be sure to clamp securely.
• Once wiring work is completed, check to make sure there are no
loose connections among the electrical parts in the control box.
(Refer to figure 16)1. Control box
2. Ground position
3. Clamp (accessory)4. Shutoff valve attachment plate
5. Connecting electrical wiring
6. Ground wire (Yellow/Green)
7. Terminal block (X1M)
8. Pass through included clamp.
9. Interunit wiring
10. (To X2M [TO IN/ D UNIT] (F1, F2))
11. Terminal block (X2M)
6-4 Interunit wiring connection procedure
• Between indoor units in the same system, pass the wiring
between the units as shown in figure 17. (There is no polarity.)
(Refer to figure 17)1. Terminal block (X2M)
2. Use balance type shield wire (with no polarity).
3. Indoor unit
4. Under no circumstances should 220-240V be con-
nected.
Precautions regarding the length of wiring between units
Exceeding the following limits may cause transmission malfunctions,
so observe them.
Max. wiring length Max. 300 m
Total wiring length Max. 600 m
Max. no. of branches 9
Precautions regarding wiring between units
• Do not connect 220-240V power wiring to terminals for the
interunit wiring. Doing so would destroy the entire system.
• Wiring to the indoor unit should be wired to F1 and F2 (TO IN/D
unit) on the outdoor unit’s terminal block (X2M).
• The interunit wiring should be secured inside the unit and then fin-
ished by being wrapped with tape at the same time as the on-site
refrigerant piping, as shown in figure 18.
Tightening torque (N·m)
M5 Power terminal 2.39~2.91
M4 Shield ground 1.18~1.44
M3 Transmission wiring terminal block 0.8~0.97
If small animals might enter the
unit, block the knock holes with an
appropriate material (field supply).
Burr
Insulating sleeve
Round crimp-style
terminal Electric Wire
Connect wires
of the same gauge
to both side.
Do not connect
wires of different
gauges.
Do not connect
wires of the same
gauge to one side.
Model name Frequency VoltageRated cur-
rent for fuses
Maximum
outdoor unit
operating
current
RXYMQ4PVE ~50Hz 230-240V 30A 27.0A
RXYMQ5PVE ~50Hz 230-240V 30A 27.0A
RXYMQ6PVE ~50Hz 230-240V 30A 27.0A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 250/308
Installation Manual EDMT34-635A
244 Installation of Outdoor Units
3PN07193-2B
7 English
(Refer to figure 18)1. Liquid pipe
2. Finishing tape
3. Insulation material
4. Interunit wiring
5. Gas pipe
Note• The above wiring should be wired using 0.75 – 1.25 mm
2 shielded
(balance type) wiring.(See figure 16 for how to ground the shielded parts.)
• All interunit wiring is to be procured on site.
Caution
Up to 9 branches are available in the wiring among units.
Branch after branch cannot perform wiring between units.
(Refer to figure 19)1. Branch
2. Branches after branch points
3. Caution on branches in the wiring among units
7. PRECAUTIONS ON REFRIGERANTPIPING
Caution
To the pipe-layer
• Do not operate the unit with the transport clasp attached. This
can cause abnormal shaking or noise. See “5. PRECAUTIONS
ON INSTALLATION” and “How to remove the transport clasp”.
7-1 Installation tools
Use the right par ts to ensure tolerance and to prevent foreign matter
for entering.
Gauge manifold, charge hose, etc.
• Make sure to use installation tools that are exclusively used forR410A installations to withstand the pressure and to prevent for-eign materials (e.g. mineral oils such as SUNISO and moisture)
from mixing into the system.(The screw specifications differ for R410A and R407C.)
Vacuum pump
• Use extreme caution to prevent pump oil from flowing back-wards through the system when the pump is stopped.
• Use a vacuum pump which can evacuate to –100.7 kPa (5Torr,–755mmHg).
7-2 Selecting piping material
• Use pipes that have no contaminants adhered to their inner surfaces(such as sulfur, iron oxide, dust, cutting chips, oil and moisture). (It isdesirable that adhered oil inside the piping is 30mg or less per 10m.)
• The wall thickness of the refrigerant piping should comply with locallaws and regulations. The design pressure for R410A is 4.0MPa.
• Use the following material for the refrigerant piping.
Material: Jointless phosphor-deoxidized copper pipe.• Thickness and size: choose based on the piping size selection
method on the “7-8 Air tight test and vacuum drying”.• Make sure to use the separately sold refrigerant branch kit whenbranching the piping.
• Piping work should be done within the maximum length, height
difference, and length after branches set out in “7-8 Air tight testand vacuum drying”.
• Install the refrigerant branch kit while observing the following con-
dition and referring to the installation manual offered as an acces-sory of the kit.
(Refer to figure 20)
1. Install the REFNET joint so it splits horizontally or vertically.
2. Horizontal surface
3. A-arrow view
4. ±30° or less
5. Level
6. Vertical is also OK
7. Install the REFNET header so that it splits horizontally.
8. B-arrow view
7-3 Protection against contamination when
installing pipes
• Wrap the piping to prevent moisture, dirt, dust, etc. from entering
the piping.
• Exercise caution when passing copper piping through the
through-holes and when passing them out to the outside.
7-4 Pipe connection
• See “Shutoff valve operation procedure” in “7-8 Air tight test and
vacuum drying” regarding handling of the shutoff valve.
• Only use the flare nuts included with the unit. Using different flare
nuts may cause the refrigerant to leak.
• Be sure to perform a nitrogen blow when brazing.
(Brazing without performing nitrogen replacement or releasing
nitrogen into the piping will create large quantities of oxidized film
on the inside of the pipes, adversely affecting valves and compres-
sors in the refrigerating system and preventing normal operation.)
NoteThe nitrogen used when brazing while flowing the nitrogen should be
set to 0.02 MPa (0.2 kg/cm2: just enough to feel a breeze on your
cheek) with the decompression valve.
• Do not mix any refrigerant other than that specified into the refrig-
erant system.
• Do not mix air into the refrigerant system.
Caution
Do not use a flux when brazing the refrigerant pipe joints.
Use phosphor copper brazing (BCuP-2: JIS Z 3264/B-Cu93P-
710/795: ISO 3677) which does not require flux.
(Using a chlorine flux may cause the pipes to corrode, and if it
contains fluoride it may cause the refrigerant lubricant to deterio-
rate, adversely affecting the refrigerant piping system.)
(Refer to figure 21)
1. Refrigerant pipe
2. Location to be brazed
3. Regulator
4. Nitrogen
5. Manual valve
6. Taping
7-5 Connecting the refrigerant piping
• The local interunit piping is connectable in four directions.
(Refer to figure 22)1. Front panel
2. Pipe outlet panel
3. Backward
4. Sideways
5. Downward
6. Pipe outlet panel screw
7. Forward8. Screw for front panel
• When connecting in a downward direction, make four round holes
using a 6-mm iameter drill in the central section around the knock
hole and open the knock hole.
(Refer to figure 23)1. Dril
2. Center area around knockout hole
3. Knockout hole
4. Slit
• After knocking out the knock-out, it is recommended to apply
repair paint to the edge and the surrounding end surfaces to pre-
vent rusting.
(Refer to figure 24)1. Bottom frame
2. Interunit piping
Place Installation period Protection method
OutdoorMore than a month Pinch the pipe
Less than a monthPinch or tape the pipe
Indoor Regardless of the period
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 251/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 245
13
C: 3PN07193-2B
English 8
NoteCutting out the two slits makes it possible to install as shown in fig-
ure 24. (Use a metal saw to cut out the slits.)
<Precautions when connecting pipes>
• Please refer to the Table 1 for the dimensions for processing
flares.
•
• Please refer to the Table 1 for the tightening torque. (Too much
tightening will end up in splitting of the flare.)
Table 1
• If a torque wrench is not available, there is a place where the tight-
ening torque will suddenly increase if a normal wrench is used to
tighten the flare nut.
From that position, further tighten the flare nut the angle shown
below.
• After all the piping has been connected, use nitrogen to perform a
gas leak check.
Q6 type
(Refer to figure 25-[1])
1. Front connection
2. Gas side accessory pipe (1)
3. Gas side accessory pipe (3)
4. Gas side piping (field supply)
5. Cut at an appropriate length.
6. Gas side accessory pipe (2)
(Refer to figure 25-[2])1. Rear-side connection
2. Gas side accessory pipe (1)
3. Gas side accessory pipe (2)4. Gas side accessory pipe (3)
5. Gas side piping (field supply)
(Refer to figure 25-[3])
1. Side connection
2. Gas side accessory pipe (2)
3. Cut at an appropriate length.
4. Gas side piping (field supply)
5. Gas side accessory pipe (3)
6. Gas side accessory pipe (1)
(Refer to figure 25-[4])1. Bottom connection
2. Cut at an appropriate length.
3. Gas side piping (field supply)
4. Gas side accessory pipe (3)
5. Gas side accessory pipe (1)
Precautions for connecting pipes
• Be careful not to let the interunit piping come into contact with the
compressor terminal cover.
Adjust the height of the insulation material on liquid pipe when it
has the possibility of getting in contact with the terminal. Also
make sure that the interunit piping does not touch the mounting
bolt of the compressor.
(Refer to figure 27)1. Terminal cover
2. Compressor
3. Corking, etc.
4. Insulation material
5. Bolts
6. Interunit piping
• If installing the outdoor unit higher than the indoor unit, caulk the
space around insulation and tubes because condensation on the
check valve can seep through to the indoor unit side.
[Preventing foreign objects from entering]
• Plug the pipe through-holes with putty or insulating material (pro
cured locally) to stop up all gaps, as shown in figure 26.
(Insects or small animals entering the outdoor unit may cause a
short in the control box.)
(Refer to figure 26)
1. Putty or insulating material2. (field supply)
7-6 Heat insulation of piping
• If you think the humidity inside the ceiling might exceed 30°C and
RH80%, reinforce the insulation on the cooling piping. (At least
20 mm thick) (Condensation may form on the surface of the insu-
lation.)
• Be sure to insulate the interunit piping (liquid and gas-side) and
the refrigerant branch kit. (Not insulating them may cause leak-
ing.)
(The highest temperature that the gas-side piping can reach is
around 120°C, so be sure to use insulating material which is very
resistant.)
When connecting the flare nut, coat the flare inside with
refrigerating machine oil and initially tighten by hand 3 or 4 turnsbefore tightening firmly.
Caution
For local insulation, be sure to insulate all the way to the pipe con-
nections inside the machine.Exposed piping may cause leaking or burns on contact.
Pipe sizeTightening
torque (N·m)
A dimen-
sions for
processing
flares (mm)
Flare shape
φ 9.5 32.7~39.9 12.8~13.2
φ 15.9 61.8~75.4 19.3~19.7
φ 19.1 97.2~118.6 23.6~24.0
Pipe size Further tightening angleRecommended arm length
of tool
φ9.5 60°~ 90 ° Approx. 200 mm
φ15.9 30°~ 60° Approx. 300mm
φ19.1 20°~ 35° Approx. 450mm
A 4 5 ˚ ±
2 ˚
9 0 ˚ ± 2 ˚ R0.4~0.8
Refrigerant oil
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 253/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 247
13
3PN07193-2B
English 10
7-8 Air tight test and vacuum drying
After doing the piping, perform the following inspections.
Be sure to use nitrogen gas. (See the figure (“Shutoff valve operation
procedure”) for the location of the service port.)
[Procedure]Pressurize from the liquid pipes and gas pipes to 4.0 MPa (and not
above 4.0 MPa). If there is not pressure drop over the next 24 hours,
the equipment has passed the test.
If the pressure drops, check for leakage positions. (Confirm that there
is no leakage, then release nitrogen.)
Use a vacuum pump that can create a vacuum down to at least
–100.7 kPa (5 Torr, –755 mmHg).
[Procedure]
Operate the vacuum pump for at least 2 hours from both the liquid
and gas pipes and decrease the pressure to at least –100.7 kPa.
Leave at below –100.7 kPa for at least 1 hour and make sure that the
vacuum gauge does not rise. (If it does rise, there is either still mois-
ture in the system or a leak.)
Cases where moisture might enter the piping (i.e., if doing workduring the rainy season, if the actual work takes long enough that
condensation may form on the inside of the pipes, if rain might enter
the pipes during work, etc.)
After performing the vacuum drying for 2 hours, pressurize to
0.05 MPa (i.e., vacuum breakdown) with nitrogen gas, then depres-
surize down to at least –100.7 kPa for an hour using the vacuum
pump (vacuum drying). (If the pressure does not reach at least
–100.7 kPa even after depressurizing for at least 2 hours, repeat the
vacuum breakdown - vacuum drying process.) Leave as a vacuum
for 1 hour after that, and make sure the vacuum gauge does not rise.
(Refer to figure 28)1. Decompression valve
2. Nitrogen
3. Vacuum pump
4. Valve (Open)
5. Charge hose6. Shutoff valve service port
7. Indoor unit
8. Gas line shutoff valve (Close)
9. Liquid line shutoff valve (Close)
10. Indicates local procurement
11. Outdoor unit
NoteThe shutoff valve must always be turned to “closed”.
Otherwise the refrigerant in the outdoor unit will pour out.
• The names of parts needed to operate the shutoff valve are
shown in the figure below. The unit is shipped from the factory
with the shutoff valve turned to the “closed” position.
• Since the side boards may be deformed if only a torque wrench is
used when loosening or tightening flare nuts, always lock the
shutoff valve with a wrench and then use a torque wrench.
• In cases where the unit is run in heating mode when the outside
temperature is low or in other situations where the operating pres-
sure might drop, seal the gas-side flare nut on the shutoff valve
with silicon sealant or the like to prevent it from freezing.
Shutoff valve operation procedure
Have a hex wrench ready (size: 4 mm and 6 mm).
Opening the valve
1. Place the hex wrench on the valve bar and turn counter-clock-
wise.
2. Stop when the valve bar no longer turns. It is now open.
Close the valve
1. Place the hex wrench on the valve bar and turn clockwise.
2. Stop when the valve bar no longer turns. It is now closed.
• A seal is attached to the point indicated by the arrow.Take care not to damage it.
• Be sure to tighten the valve lid securely after operating the valves.
• Use a push-rod-provided charging hose for operation.
• Be sure to tighten the valve lid securely after operation.
Tightening torque .......... 10.8 ~ 14.7 N·m
Air tight test
Vacuum drying
Shutoff valve operation procedure
Precautions when handling the shutoff valve
Servicing port
Valve bar
Valve lid
Interunit piping connection
Precautions for handling valve lid
Liquid-side tightening torque Gas-side tightening torque
13.5 ~ 16.5 N·m 22.5 ~ 27.5 N·m
Precautions for handling servicing port
Silicon sealing pad
(Make sure that there is no gap)
Direction to open Direction to open
<Gas pipe><Liquid pipe>
Valve lid
Shutoff valve(lid attachment)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 254/308
Installation Manual EDMT34-635A
248 Installation of Outdoor Units
3PN07193-2B
11 English
8. ADDITIONAL REFRIGERANTCHARGE
Warning
• When leaving the unit with the power on, be sure to
switch with another person doing the installation or
close the front panel.
8-1 Before adding refrigerant
• Make sure the following work and inspection is complete, in
accordance with the installation manual.
• Piping
• Wiring
• Airtightness test, Vacuum drying
8-2 Checking the refrigerant tank
• Check whether the tank has a siphon pipe before charging and
place the tank so that the refrigerant is charged in liquid form.
(See the figure below.)
8-3 Adding refrigerant
9. POST-WORK CHECKSPerform the following checks after work is complete.
(1) Drain pipe connection, removal of transport clasp →
See “5. PRECAUTIONS ON INSTALLATION”.
(2) Incorrect power supply wiring, loose screws →
See “6-3 How to connect the power supply wiring”.
(3) Incorrect interunit wiring, loose screws→
See “6-4 Interunit wiring connection procedure”.
(4) Incorrect refrigerant piping connections →
See “7. PRECAUTIONS ON REFRIGERANT PIPING”.
(5) Piping sizes, use of insulation→
See : “7-2 Selecting piping material”.
“7-6 Heat insulation of piping”.
(6) Shutoff valve check→
Make sure both the liquid-side and gas-side shutoff valves are
open.
(7) Record of Amount of Refrigerant Added→
Record it on “Record of Amount of Refrigerant Added” on the
“Service Precautions” plate.
(8) Measuring the insulation of the main power circuit→
• Use a 500V mega-tester.
• Do not use the mega-tester for weak currents other than 220-
240V. (Interunit wiring)
Caution
To the pipe-layer
After completing installation, be sure to open the valve.
(Operating the unit with the valve shut will break the compressor.)
10. TEST RUNThis unit is equipped with a crank case heater to ensure smooth
startup. Be sure to turn the power on at least 6 hours before
operation in order to have power running to the crank case
heater.
Warning
When leaving the unit with the power on, be sure to
switch with another person doing the installation or
close the front panel.
Precautions before turning the power on
• Using insulating sheets, tape electric parts as described in the
“Service Precautions” plate on the back of the front panel.
• All indoor units connected to the outdoor unit operate automati-
cally.
Complete work on the indoor units in order to ensure maximumsafety.
10-1 Power On–Check Operation
• Make sure to perform the check operation after installation.
(If the air conditioner is operated using the indoor remote control-
ler without performing the check operation, the malfunction code
“U3” is displayed in the indoor remote controller, and normal oper-
ation is disabled.)
• When making settings on the outdoor unit PC board (A2P) after
turning the power on, do not touch anything other than the push-
button switches and dip switches.
(See the “Service Precautions” plate for the locations of the push-
button switches (BS1-5) and dip switches (D1-1, 2) on the PC
board (A2P).)
Tank with siphon pipe Other tanks
There is a siphonpipe inside, so the
cylinder need not beupside-down to fillwith liquid.
(Stand the cylinderupright when filling.)
Stand the tankupside down andcharge.
1. Calculate the amount of refrigerant to add as described in “Calculating the amount of refrigerant to add”in “7. PRECAUTIONS ON REFRIGERANT PIPING”.
2. After the vacuum drying is finished, open valve A and charge the calculated amount of refrigerant throughthe service port for the liquid-side shutoff valve.
3. Close valve A after charging is complete.Note: If all the refrigerant to be added cannot be charged using the above procedure, right-hand the procedurebelow and re-charge the refrigerant.
If all the refrigerant could not be addedAdd refrigerant using the following procedure. See the “Service Precautions” plate attached to the control box lid onthe outdoor unit for details on the settings for adding refrigerant.[Procedure]
1. Close the front panel and turn on the power to all outdoor units and indoor units in the refrigeration system.2. Open the gas and liquid-side shutoff valves all the way and add the refrigerant. (Open valve A immediately after starting the compressor.)3. Once the appropriate amount of refrigerant is in, press the confirmation button (BS3) on the outdoor unit PC
board (A2P), and stop operation after adding the refrigerant.4. Close valve A after charging is complete.
Filling after calculating the amount of refrigerant to add
• See “Shutoff valve operation procedure” in “ 7. PRECAUTIONS ON REFRIGERANT PIPING” fordetails on how to use the shutoff valve.(Refer to figure 29)
1. R410A Tank (Siphon system) 5. Shutoff valve service port 2. Measuring instrument 6. Gas line shutoff valve 3. Valve A 7. Outdoor unit 4. Indoor unit 8. Liquid line shutoff valve
Status of the shutoff valve and other valves when adding refrigerant
State of valve A and the shutoff valve Valve ALiquid lineshutoff valve
Gas lineshutoff valve
Close Close Close
Close CloseOpen
Before starting to charge the refrigerant
During charging of the refrigerant
• See “Shutoff valve operation procedure” in “7. PRECAUTIONS ON REFRIGERANT PIPING ” for details on how to use the shutoff valve.• Connect the service port (for charging refrigerant) inside the unit. When the unit is shipped from the factory,
refrigerant is already charged, so be careful when connecting the charge hose.• After adding the refrigerant, do not forget to close the lid of the service port (for adding refrigerant).
The tightening torque of the lid is 11.5 – 13.9 N/m.(Refer to figure 30)1. Gas line shutof f valve 2. L iquid l ine shuto ff va lve 3. Shuto ff va lve service port4. Indoor unit 5. Measuring instrument 6. R410A Tank (Siphon system)7. Valve A 8. Service port 9. ( For adding refrigerant)10. Outndoor unit
Status of the shutoff valve and other valves when adding refrigerant operation
State of valve A and the shutoff valve Valve ALiquid lineshutoff valve
Gas lineshutoff valve
Close
Open Open Open
Open OpenBefore starting to charge the refrigerant
During charging of the refrigerant
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 255/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 249
13
3PN07193-2B
English 12
• During the operation, monitor the outdoor unit operation status
and check for any incorrect wiring.
<Precautions During Check Operation>
• If operation is performed within 12 minutes of the indoor and
outdoor units being turned on, H2P will light up, and the
compressor will not run.Only perform operation after checking that the LED display is as
shown in “10-1 Power On–Check Operation” 2. table.
• In order to ensure uniform refrigerant distribution, it may take up to
around 10 minutes for the compressor to start up after the unit
begins running. This is not a malfunction.
• Each indoor unit cannot be checked individually for problems.
After this operation is complete, run the unit normally using the
remote controller.
• The check run cannot be performed in recovery or other modes.
• If the outlet pipe thermistor (R2T), the intake pipe thermistor
(R3T), and the pressure sensors (S1NPH and S1NPL) are
removed before operation, the compressor might burn out, so
avoid this under all circumstances.
10-2 Temperature control operation checklist
[Set the master unit (the indoor unit with rights of selection
cooling or heating)]
<With a wired remote controller>
• After check operation is complete, displays of all the connected
remote controllers will flash “Switching mode”.
• Ask the customer which indoor unit to set as the master unit.
(Setting the most frequently used indoor unit as the master unit
is recommended.)
• Press the mode-switch button on the remote controller for the
master unit.
• That remote controller will then become the remote controller for
switching between cooling and heating.
• All other remote controllers will display “Switching mode”.
<With wireless remote controller>
• After check operation is complete, the timer lamps on all the
indoor units which are connected will flash.
• Ask the customer which indoor unit to set as the master unit.
(Setting the most frequently used indoor unit as the parent unit
is recommended.)
• Press the mode-switch button on the remote controller for the
master unit.
A beeping sound will be emitted and the timer lamps on all the
indoor units will go off.• That indoor unit will be the indoor unit which has the right to
switch between cooling and heating.
For details, see the operation manual which comes with the unit.
• After check operation is complete, checking the temperature con-
trol using normal operation.
(Heating is not possible if the outdoor temperature is 24°C or
higher. See the included operation manual.)
(1) Make sure the indoor and outdoor units are operating nor-
mally.
(If liquid compression by the compressor or other abnormal
noises can be heard, stop the unit immediately, heat the
crank case for a sufficient amount of time, and try again.)
(2) Run each indoor unit one at a time and make sure the corre-
sponding outdoor unit is also running.
(3) Check to see if cold (or hot) air is coming out of the indoor
unit.(4) Press the fan direction and fan strength buttons on the indoor
unit to see if they operate properly.
<Precautions during temperature control checks>
• For around 5 minutes after the compressor stops, the compressor
will not run even if the “operate/stop” button on the remote control-
ler is pressed.
• When the system operation is stopped by the remote controller,
the outdoor units may continue operating for further 1 minutes at
maximum.
• Malfunction code “U3” is displayed if check operation is not per-
formed using the test run button the first time after installation.
Perform the check operation in accordance with “10-1 Power On–
Check Operation”.
1. Close the outdoor unit’s front panel.Turn the power on for the outdoorunit and the indoor unit.
2. • Open the outdoor unit’s front panel.
• Make sure the LED display on the outdoor unit’s PC boards (A1P and
A2P) are as shown in the following chart.
LED display(Default statusbefore delivery)
SEVICEMONITOR MODE
HAP
A1P A2P
H1P H2P H3P H4P H5P H6P H7P
TEST/
HWLIND MASTER SLAVE L.N.O.P DEMAND
6. Close the outer panel of the outdoor unit after check operation is complete.
Do not leave any shutoff valve closedotherwise the compressor will fail.
Caution
Be sure to turn the power on at least6 hours before operation in order to havepower running to the crank case heater.
To avoid the risk of electric shock, do not touch anything other than the
push-button switches on the PC board (A2P) when making settings.
Caution
LED display: OFF ON Blinking
Use caution to avoid electric shock whileworking, since the outdoor unit is on.
• Only set the push-button switches (BS1-5)after making sure the microcomputer OKmonitor is lit up.
• See the “Service Precautions” plate on thefront panel of the outdoor unit for details onhow to make the settings.(Do not forget to write the settings down onthe “Service Precautions” plate.)
• The dip switch (DS1-1) does not need to beset, so do not touch it.Doing so may cause malfunction.
• If you have to leave the outdoor unit during check operation,either switch with another worker or close the front panel.
• The system operates for about 30 minutes (60 minutes atmaximum) and automatically stops the check operation.
• The system can start normal operation about3 minutes after the check operation if theremote controller does not display any error code.The remote controller will show the test rundisplay during check operation.
3. • When the customer requestsquiet operation or demandoperation, make these settingsusing the push-button switches(BS1-5) on the outdoor unit’sPC board (A2P).
• Operate the push-buttonswitches through the openingafter protecting it with an
insulation cover.(See the “Service Precautions”plate for details.)
4. • Check that the liquid and gas-sideshutoff valves are open, and ifthey are closed, open them.
5. Press the test run button (BS4) forat least five seconds and performcheck operation.For details, see “How to performcheck operation” on the “ServicePrecautions” plate.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 256/308
Installation Manual EDMT34-635A
250 Installation of Outdoor Units
3PN07193-2B
13 English
[Remote controller displays malfunction code]
(Check on a remote controller connected to the indoor unit.)
• When using a central controller, see the installation manual or
service manual which came with the central controller.
[If nothing is displayed on the remote controller]
• There might be a problem with the connections or communicationbetween the indoor unit and the remote controller.
Make sure all the wiring is properly connected.
Caution
To the pipe-layer, To the electrician
After the test run, when handing the unit over to the customer,
make sure the front panel on the unit and all screws are attached.
11. CAUTION FOR REFRIGERANT LEAKS
(Points to note in connection with refrigerant leaks)
Introduction
The installer and system specialist shall secure safety againstleakage according to local regulations or standards. The follow-ing standards may be applicable if local regulations are not
available.
The VRV System, like other air conditioning systems, uses R410A asrefrigerant. R410A itself is an entirely safe non-toxic, non-combusti-ble refrigerant. Nevertheless care must be taken to ensure that air
conditioning facilities are installed in a room which is sufficientlylarge. This assures that the maximum concentration level of refriger-ant gas is not exceeded, in the unlikely event of major leak in the sys-
tem and this in accordance to the local applicable regulations andstandards.
Maximum concentration level
The maximum charge of refrigerant and the calculation of the maxi-mum concentration of refrigerant is directly related to the humanlyoccupied space in to which it could leak.
The unit of measurement of the concentration is kg/m3 ( the weight in
kg of the refrigerant gas in 1m3 volume of the occupied space).
Compliance to the local applicable regulations and standards for themaximum allowable concentration level is required.
In Australia the maximum allowed concentration level of refrigerant to
a humanly space is limited to 0.44 kg/m3 for R410A.
Pay a special attention to the place, such as a basement, etc.where refrigerant can stay, since refrigerant is heavier than air.
Procedure for checking maximum concentration
Check the maximum concentration level in accordance with steps 1to 4 below and take whatever action is necessary to comply.
1. Calculate the amount of refrigerant (kg) charged to each systemseparately.
Note• Where a single refrigerant facility is divided into 2 entirely inde-
pendent refrigerant systems then use the amount of refrigerantwith which each separate system is charged.
2. Calculate the smallest room volume (m3)
Incase like the following, calculate the volume of (A), (B) as a sin-gle room or as the smallest room.
A.Where there are no smaller room divisions
Malfunc-tion code
Installation error Remedial action
E3
The shutoff valve of an outdoorunit is left closed.
Open the gas-side shutoff valve and theliquid-side shutoff valve.
Refrigerant overcharge.
Recalculate the required amount of refrig-erant from the piping length and correctthe refrigerant charge level by recoveringany excessive refrigerant with a refriger-ant recovery machine.
F6 Refrigerant overcharge.
Recalculate the required amount of refrig-erant from the piping length and correctthe refrigerant charge level by recoveringany excessive refrigerant with a refriger-ant recovery machine.
E4
The shutoff valve of an outdoorunit is left closed.
Open the gas-side shutoff valve and theliquid-side shutoff valve.
Insufficient refrigerant.
Check if the additional refrigerant chargehas been finished correctly.
Recalculate the required amount of refrig-erant from the piping length and add anadequate amount of refrigerant.
F3
Refrigerant overcharge.
Recalculate the required amount of refrig-erant from the piping length and correctthe refrigerant charge level by recoveringany excessive refrigerant with a refriger-ant recovery machine.
The shutoff valve of an outdoorunit is left closed.
Open the gas-side shutoff valve and theliquid-side shutoff valve.
Insufficient refrigerant.
Check if the additional refrigerant chargehas been finished correctly.
Recalculate the required amount of refrig-erant from the piping length and add anadequate amount of refrigerant.
U2 Insufficient supply voltageCheck to see if the supply voltage is sup-plied properly.
U3If a check operation has notbeen performed.
Perform a check operation.
U4 No power is supplied to an out-door unit. Turn the power on for the outdoorunit.
UAIf no dedicated indoor unit isbeing used.
Check the indoor unit. If it is not a dedi-cated unit, replace the indoor unit.
UF
The shutoff valve of an outdoorunit is left closed.
Open the gas-side shutoff valve and theliquid-side shutoff valve.
If the right indoor unit piping andwiring are not properly con-nected to the outdoor unit.
Make sure that the right indoor unit pipingand wiring are properly connected to theoutdoor unit.
UHIf the interunit wiring has notbe connected or it hasshorted.
Make sure the interunit wiring is correctlyattached to terminals (X2M) F1/F2 (TOIN/D UNIT) on the outdoor unit circuitboard.
amount of refriger-ant in a single unitsystem (amount ofrefrigerant withwhich the systemis charged beforeleaving the factory)
+additional chargingamount (amount ofrefrigerant addedlocally in accordancewith the length ordiameter of the refrig-erant piping)
=total amountof refriger-ant (kg) inthe system
Direction of the refrigerant flow
Room whererefrigerant leakhas occurred(outflow of all therefrigerant fromthe system)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 257/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 251
13
3PN07193-2B
English 14
B.Where there is a room division but there is an openingbetween the rooms sufficiently large to permit a free flow ofair back and forth.
(Where there is an opening without a door or where there areopenings above and below the door which are each equivalent insize to 0.15% or more of the floor area.)
3. Calculating the refrigerant density using the results of the calcu-lations in steps 1 and 2 above.
If the result of the above calculation exceeds the maximum con-centration level then make similar calculations for the second thenthird smallest room and so until the result falls short of the maxi-mum concentration.
4. Dealing with the situations where the result exceeds the maxi-mum concentration level.Where the installation of a facility results in a concentration inexcess of the maximum concentration level then it will be neces-sary to revise the system.Please consult your Daikin supplier.
total volume of refrigerant in therefrigerant system
≤maximum concen-
tration level (kg/m3)size (m
3) of smallest room in which
there is an indoor unit installed
Opening between roomsPartition
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 258/308
Installation Manual EDMT34-635A
252 Installation of Outdoor Units
2.2 RXMQ-PVE (Cooling Only)
3PN07193-1B
figure 1
23
4
2
1
≥ 1 , 0 0 0
≥ 1 , 0 0 0
≥
1 ,
5 0 0
≥1,5 0 0
≥1,5 0 0
[1] [2]
[3] 1 0
0 o r
m o r e
1 0 0
o r m o r e
3 0 0 o r
m o r e
1 0 0 o r m o r e
1 0 0 o r m o r e
2 0 0 o r m o r e
1 0 0 o r m
o r e
figure 4
figure 7
1
2
4 5
6 7
8
3
figure 2
1
2
3
4
5
6
5
figure 3
[1] [2]
[3]
1 0 0
o r m o r e
1 5 0 o r
m o r
e
5 0 0
o r
m o r e
1000 ormore
1 5 0 o r m o r e 1 5 0 o r m o
r e
1000 ormore
500 ormore
500 ormore
1000 ormore
1 0 0 0 o r m o r e
2 0 0 o r m o r e 3 0
0 o r
m o r e
figure 5
[1] [2]
[3] [4]
5 0 0 o
r m o r e
5 0 0
o r
m o r e
5 0 0 o
r
m o r e
5 0 0 o
r m o r e
1 0 0 0
o r m o r e
1 0 0 0
o r m
o r e
1000 ormore
1000 ormore
figure 6
[1] [2]
L
L L
A A
L
H
H H
H
5 0 0
o r
m o r e
2 5 0
o r
m o r e 3 0
0 o r
m o r e
5 0 0
o r
l e s s
5 0 0
o r
l e s s
1 0 0
o r
m o r e
3 0 0
o r
m o r e
1 0 0 0
o r m
o r e
L > HL > H
[3] [4]
1000 ormore 1000 or
more
figure 7
[5] [6] [7] [8]
L
L
LL
HH
H H
AA A 5 0
0 o r
m o r e
5 0 0
o r
m o r e
5 0 0
o r
m o r e
1 0 0
o r
m o r e
1 0 0 0
o r
m o r e
1 0 0 0
o r
m o r e
1 5 0 0
o r
m o r e
1000 ormore
1000 ormore
L > H
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 259/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 253
13
3PN07193-1B
[1]
[2]
Z
Z
1 0 0 0
o r m
o r e
3 0 0
o r m o r e
100
100
figure 8 figure 9
1
2
22
3
3
9
10
11
3
7
4
5
5
68
figure 16
1 4
2
3
L N
11
910
8
7
6
5
5
[1]
[2]
1 0 0 0
o r
m o r e
2 0 0 0 o r
m o r e
2 0 0
o r
m o r e
1 0 0
o r
m o r e
1 5 0 0
o r
m o r e
6 0 0
o r
m o r e
3 0 0 0
o r
m o r e
H
A
L
1
20
figure 10
1
2
7
3
4
65
1
2
3
140 140
421
45
612
620
3 5 0 2
1 9 1
1 7
3 0
2 9 0
( 3 4 5 ~ 3 5 5 )
12
3
4
5
6
7
2
1
5
3
4
3
5
6 6 6
4 4 4
7 7 78 8 8
figure 12
figure 11
figure 13
figure 14
figure 15
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 260/308
Installation Manual EDMT34-635A
254 Installation of Outdoor Units
3PN07193-1B
F1F2
F1TOIN/DUNIT TO OUT/D UNIT
F2 F1 F 2
F1 F2 F1 F2
1
2
3
4
1
2
3
56
8
47
1
2 3
4
5
[1] [2] [3] [4]1
22
2 233
4
5
4
5
63
3
4
4655
1 1 1
figure 25
figure 29
1 23
4
4
56
figure 30
figure 17
figure 21
figure 31
F2F1 F2F1 F2F1
F2F1 F2F1
1 2
3
figure 18 figure 19
1
7
2
2
8
3
4
5
6
B
A
figure 20
12
3
4
4
12
figure 22 figure 23 figure 24
1
2
1
2
3
4 5
6
1
2
3
4
5
6
7
11 89
10
figure 26 figure 27 figure 28
1
2
34
5
678
101
2
3
4
56
7
89
1
2 3
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 261/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 255
13
3PN07193-1B
1 English
RXYMQ4PV4A
RXYMQ5PV4A
RXYMQ6PV4A
RX(Y)MQ4PVE
RX(Y)MQ5PVE
RX(Y)MQ6PVEVRVIII-S System air conditioner Installation manual
CONTENTS
1. SAFETY CONSIDERATIONS..................................................12. INTRODUCTION......................................................................2
2-1. Combination......................................................................22-2. Standard operation limit ....................................................22-3. Spec list ............................................................................22-4. Electrical properties ..........................................................32-5. Standard supplied accessories.........................................32-6. Option accessory .............................................................. 3
3. BEFORE INSTALLATION........................................................3
4. SELECTING INSTALLATION SITE .........................................3
5. PRECAUTIONS ON INSTALLATION...................................... 5
6. FIELD WIRING ........................................................................5
6-1. Wiring connection example for whole system................... 56-2. How to lay the power supply wiring and
transmission wiring ...........................................................66-3. How to connect the power supply wiring...........................66-4. Interunit wiring connection procedure ...............................7
7. PRECAUTIONS ON REFRIGERANT PIPING.........................7
7-1. Installation tools ................................................................ 77-2. Selecting piping material...................................................77-3. Protection against contamination when installing pipes......77-4. Pipe connection ................................................................ 77-5. Connecting the refrigerant piping......................................87-6. Heat insulation of piping....................................................87-7. Example of connection......................................................97-8. Air tight test and vacuum drying...................................... 10
8. ADDITIONAL REFRIGERANT CHARGE ..............................10
8-1. Before adding refrigerant ................................................118-2. Checking the refrigerant tank..........................................118-3. Adding refrigerant ...........................................................11
9. POST-WORK CHECKS.........................................................11
10. TEST RUN .............................................................................11
10-1.Power On–Check Operation ..........................................1110-2.Temperature control operation checklist........................12
11. CAUTION FOR REFRIGERANT LEAKS...............................13
1. SAFETY CONSIDERATIONSPlease read this “SAFETY CONSIDERATIONS” carefully before
installing air conditioning equipment and be sure to install it correctly.
This manual classifies precautions into WARNINGS and CAUTIONS.
Be sure to follow all precautions below: they are all important for
ensuring safety.
After completing the installation, make sure that the unit operates
properly during the start-up operation.
Please instruct the customer on how to operate the unit and keep it
maintained.
Also, inform customers that they should store this installation manual
along with the operation manual for future reference.
This air conditioner comes under the terms “appliances not accessi-
ble to the general public”.
Safety Precaution
VRV System is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
Meaning of warning and caution symbols.
Warning ........Failure to observe a warning may result in death
or serious injury.
Caution .........Failure to observe a caution may result in injury
or damage to the unit.
Warning
• Ask your dealer or qualified personnel to carry out installation
work. Do not try to install the machine yourself.Improper installation may result in water leakage, electric shocks or fire.
• Perform installation work in accordance with this installation manual.
Improper installation may result in water leakage, electric shocks
or fire.
• Steps must be taken to prevent the critical concentration from
being exceeding in case the refrigerant leaks when the unit is
installed in a small room. Consult your dealer about ways to avoid
exceeding the critical concentration.
If the refrigerant does leak and the critical concentration is
breached, the room may become deprived of oxygen.
• Be sure to use only the specified accessories and parts for instal-
lation work.
Failure to use the specified parts may result in water leakage,
electric shocks, fire or the unit falling.
• Install in a location which can fully support the weight of the unit.
Insufficiently strong locations will cause the unit to drop and
cause injury.• Carry out the specified installation work after taking into account
strong winds, typhoons or earthquakes.
Improper installation work may result in the equipment falling and
causing accidents.
• Electrical wiring work should be done in compliance with all local
laws, specifications, and this manual. Dedicated power supply
wiring should be used.
Insufficient capacity in the power supply wiring or incorrect wiring
work may cause electric shock or fire.
• Make sure that all wiring is secured, the specified wires and used,
and no external forces act on the terminal connections or wires.
Improper connections or installation may result in fire.
• Wiring between indoor and outdoor units and for the power wiring
should be laid out and securely attached with an outer panel so it
does not force the service lid or other parts out of place.
Otherwise this may cause the terminal board to get hot, electric
shock, or fires.
• If the refrigerant gas leaks during installation, ventilate the area
immediately.
Toxic gas may be produced if the refrigerant gas comes into con-
tact with fire.
• After completing the installation work, check that the refrigerant
gas does not leak.
Toxic gas may be produced if the refrigerant gas leaks into the
room and comes into contact with a source of fire, such as a fan
heater, stove or cooker.
• Always shut off the power before touching any electrical parts.
• Be sure to establish an earth.
Do not earth the unit to a utility pipe, arrester, or telephone earth.
Incomplete earth may cause electrical shock, or fire.
A high surge current from lightning or other sources may cause
damage to the air conditioner.
• Be sure to install an earth leakage breaker.
Failure to install an earth leakage breaker may result in electric
shocks, or fire.
Caution
• Drain pipes should be laid following the explanation in this instal-
lation manual to achieve proper drainage and should be insulated
to prevent condensation.
Improper drain work may cause leaks, damaging furniture, etc.
• Install the indoor and outdoor units, power supply wiring and con-
necting wiring at least 1 meter away from televisions or radios in
order to prevent image interference or noise.
• Do not install the air conditioner in the following locations:
(a) where a mineral oil mist or an oil spray or vapor is produced,
for example in a kitchen.
Plastic parts may deteriorate and fall off or result in water leakage.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 262/308
Installation Manual EDMT34-635A
256 Installation of Outdoor Units
3PN07193-1B
English 2
(b) where corrosive gas, such as sulfurous acid gas, is produced.
Corroding copper pipes or soldered parts may result in refrig-
erant leakage.
(c) near machinery emitting electromagnetic waves.
Electromagnetic waves may disturb the operation of the con-
trol system and result in a malfunction of the equipment.
(d) where flammable gases may leak, where there are carbon
fiber or ignitable dust suspensions in the air, or where volatileflammables such as thinner or gasoline are handled.
Operating the unit in such conditions may result in fire.
(e) Make sure to provide for adequate measures in order to pre-
vent that the outdoor unit be used as a shelter by smal l animals.
Small animals making contact with electrical parts can cause
malfunctions, smoke or fire. Please instruct the customer to
keep the area around the unit clean.
• Do not mount or place objects on the outdoor unit.
Falling and tipping may cause injury.
• Do not wash outdoor or indoor units with water.
This may cause electric shock or fire.
Disposal requirements
Dismanting of the unit, treatment of the refrigerant, oil and even-
tual other parts, shold be done in accordance with the relevant
local and national regulations.
Caution
See the indoor unit’s installation manual for indoor unit and theremote controller installation.
2. INTRODUCTION
1. This series uses R410A new refrigerant. Be absolutely sure to
comply with “7. PRECAUTIONS ON REFRIGERANT PIPING”,
because even greater caution is needed to prevent impurities
from entering R410A (mineral oils and water).
2. The design pressure is 4.0MPa (2.8MPa for R22), which means
that piping may be thicker than conventionally, so please refer to
“7. PRECAUTIONS ON REFRIGERANT PIPING”.
3. This is a mixed refrigerant, so charge as a liquid when adding
refrigerant.
(If charged as a gas, the composition of the refrigerant maychange, preventing normal operation.)
4. The indoor unit must use R410A. See the catalog for indoor unit
models which can be connected. (Normal operation is not possi-
ble when connected to other units.)
5. The power supply of this series is single-phase, 230 to 240V
(50Hz) in the model ~PV4A, and single-phase, 220 to 230V/220V
(50/60Hz) in the model ~PVE.
2-1 Combination
The indoor units can be installed in the following range.• Be sure to connect a dedicated indoor unit. See the catalog
for indoor unit models which can be connected.
• Total capacity/quantity of indoor units
⟨Outdoor unit⟩ ⟨Total capacity of indoor units⟩ ⟨Total quantity of indoor units⟩
RXYMQ4PV4A, RX(Y)MQ4PVE.................50 ~
130 6 unitsRXYMQ5PV4A, RX(Y)MQ5PVE...........62.5 ~ 162.5 8 units
RXYMQ6PV4A, RX(Y)MQ6PVE ............ 70 ~ 182 9 units
2-2 Standard operation limit
Normal operation
The figures below assume following operating conditions for indoor
and outdoor units:
Equivalent pipe length ..........................................................7.5mLevel difference ....................................................................0m
Cooling Heating (H/P model only)
A Outdoor temperature (°CDB)B Indoor temperature (°CWB)C Outdoor temperature (°CWB)D Indoor temperature (°CDB)
Range for continuous operation
Range for pull down operation
Range for warming up operation
Operation range (performance is not guaranteed)
2-3 Spec list
For operating conditions marked with a *(a)(b) in the table, see “2-2
Standard operation limit”.
Model name H/P RXYMQ4PV4A RXYMQ5PV4A RXYMQ6PV4A
RemarksRefrigerant type R410A
Power supply 1 phase 230-240V 50Hz
Cooling performance (kW) 11.2 14.0 15.5 * (a)
Heating performance (kW) 12.5 16.0 18.0 * (b)
Energy use during cooling (kW) 3.55 4.75 5.11 * (a)
Energy use during heating (kW) 3.70 4.29 4.97 * (b)External dimensions(width × depth × height) (mm) 1345 × 900 × 320
Mass (kg) 125
Connec-tion pip-ing
Gas line piping(inch)(mm)
5/8φ 15.9
5/8φ 15.9
3/4φ 19.1
Liquid line piping(inch)(mm)
3/8φ 9.4
3/8φ 9.4
3/8φ 9.4
Model nameH/P RXYMQ4PVE RXYMQ5PVE RXYMQ6PVE
RemarksC/O RXMQ4PVE RXMQ5PVE RXMQ6PVE
Refrigerant type R410A
Power supply 1 phase 220-230V/220V 50Hz /60Hz
Cooling performance (kW) 11.2 14.0 15.5 * (a)
Heating performance (kW) 12.5 16.0 18.0 * (b)H/P
modelonly
Energy use during cooling (kW) 3.05 4.10 4.60 * (a)
Energy use during heating (kW) 3.35 4.20 4.95 * (b)H/P
modelonly
External dimensions(width × depth × height) (mm) 1345 × 900 × 320
Mass (kg) 125
Connec-tion pip-ing
Gas line piping(inch)(mm)
5/8φ 15.9
5/8φ 15.9
3/4φ 19.1
Liquid line piping(inch)(mm)
3/8φ 9.4
3/8φ 9.4
3/8φ 9.4
1914 25
5
–2010 20
–15
C
10
6
27
A
–5
1528
10
(a)35
46 15.5
B D
(c)
(b)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 263/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 257
13
3PN07193-1B
3 English
2-4 Electrical properties
For operating conditions marked with a *(c) in the table, see “2-2
Standard operation limit”.
2-5 Standard supplied accessories
Make sure that the accessories shown below are all present.
(The accessories can be found behind the front panel.)
(Refer to figure 31)1. Accessories
2. Screw for front panel
3. Front panel
2-6 Option accessory
• Refrigerant branching kit
* See “7. PRECAUTIONS ON REFRIGERANT PIPING” for
details on how to connect refrigerant branch kits and how many
are needed.
3. BEFORE INSTALLATION
<Transporting the Unit>
As shown in figure 2, bring the unit slowly. (Take care not to let hands
or things come in contact with rear fins.)
(Refer to figure 2)1. Air outlet grille
2. Intake hole3. Corner
4. Outdoor unit
5. Handle
6. Front
7. Rear
8. Always hold the unit by the corners, as holding it by the
side intake holes on the casing may cause them to
deform.
Use only accessories and parts which are of the designated specifi-
cation when installing.
4. SELECTING INSTALLATION SITE
(1) Select an installation site where the following conditions are
satisfied and that meets with your customer’s approval.
• Places which are well-ventilated.• Places where the unit does not bother next-door neighbors.
• A locations where small animals will not make nests in the unit.
• Safe places which can withstand the unit’s weight and vibration
and where the unit can be installed level.
• Locations not exposed to rain.
• A locations where there is enough space to install the unit.
• Places where the indoor and outdoor unit’s piping and wiring
lengths come within the allowable ranges.
• A location where there is no risk of flammable gas leaking.
(2) If the unit is installed in a location where it might be
exposed to strong wind, install as per figure 3.
• 5m/sec or more strong wind blown against the outdoor unit’s air
outlet causes the outdoor unit to deteriorate in air capacity and
suck in the air blown out of its air outlet (short circuit), and the fol-
lowing effects may result.
• Drop in performance.
• Increased frost formation in heating mode.• Shutting down due to increase in pressure.
• If very strong wind blows continuously on the side of the outdoor
unit with the outlet vent, the fan may turn in reverse at high
speed and break, so install as per figure 3.
(Refer to figure 3)1. Turn the air outlet side toward the building’s wall, fence or
windbreak screen.
2. Air inlet grille
3. Ensuring there is enough space for installing the unit.
4. Set the outlet side at a right angle to the direction of the
wind.
5. Strong wind
6. Blown air
(3) In installing the unit in a place frequently exposed to snow,
pay special attention to the following:
• Elevate the foundation as high as possible.• Attach the snow hood (field supply).
• Remove the rear inlet grille to prevent snow from accumulating
on the rear fins.
(4) The outdoor unit may short circuit depending on its environment,
so use the louvers (field supply).
(5) The refrigerant gas (R410A) is a safe, non-toxic and non-flam-
mable gas, but if it leaks into the room, the concentration may
exceed tolerance levels, especially in small rooms, so steps need
to be taken to prevent refrigerant leakage. See the equipment
design reference for details.
Model name H/P RXYMQ4PV4A RXYMQ5PV4A RXYMQ6PV4A Remarks
Phase ~
Frequency (Hz) 50HzVoltage (V) 230-240V
Voltage tolerance range (%) ±10
Rated current for fuses (A) 30
Maximum outdoor unit operat-ing current (A) 27 * (c)
Model nameH/P RXYMQ4PVE RXYMQ5PVE RXYMQ6PVE
RemarksC/O RXMQ4PVE RXMQ5PVE RXMQ6PVE
Phase ~
Frequency (Hz) 50Hz/60Hz
Voltage (V) 220-230V/220V
Voltage tolerance range (%) ±10
Rated current for fuses (A) 30
Maximum outdoor unit operat-ing current (A) 27 * (c)
NameOperation man-
ualClamp Others
Quantity 1 2 pcs.
• Installation manualShape
Only comes with Q6 model
NameGas side
accessory pipe (1)
Gas side
accessory pipe (2)
Gas side
accessory pipe (3)
Quantity 1 pc. 1 pc. 1 pc.
Shape
REFNET joint KHRP26M22T
REFNET header KHRP26M22H KHRP26M33H
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 264/308
Installation Manual EDMT34-635A
258 Installation of Outdoor Units
3PN07193-1B
English 4
(6) Inverter-type air conditioners sometimes cause static in other
electrical appliances.
When selecting an installation location, make sure the air condi-
tioner and all wiring are sufficiently far away from radios, comput-
ers, stereos, and other appliances, as shown in figure 1.
Particularly for locations with weak reception, ensure there is a
distance of at least 3 meters for indoor remote controllers, place
power supply wiring and interunit wiring in conduits, and groundthe conduits. Use shielded wire for interunit wiring.
(Refer to figure 1)1. Indoor unit
2. Branch switch (ground-fault circuit interrupter)
3. Remote controller
4. Personal computer or radio
(7) Space needed for installation
<Precautions when installing units in series>
• The direction for interunit piping is either forward or down when
installing units in series, as shown in the figure.
• If the piping is brought out from the back, the outdoor unit will
require at least 250 mm from its right side.
(All figures represent millimeters.)
(7)-1 IN CASE OBSTACLES EXIST ONLY IN FRONT OF THE
AIR INLET
When nothing is obstructing the top
1. Installation of single unit
• In case obstacles exist only in front of the air inlet
(Refer to figure 4-[1])
• In case obstacles exist in front of the air inlet and on both sides
of the unit (Refer to figure 4-[2])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row
• In case obstacles exist in front of the air inlet and on both sides
of the unit (Refer to figure 4-[3])
When something is obstructing the top
1. Installation of single unit
• In case obstacles exist only in front of the air inlet
(Refer to figure 5-[1])
• In case obstacles exist in front of the air inlet and on both sides
of the unit (Refer to figure 5-[2])
2. In case of installing multiple units (2 units or more) in lateral con-nection per row
• In case obstacles exist in front of the air inlet and on both sides
of the unit (Refer to figure 5-[3])
(7)-2 IN CASE OBSTACLES EXIST IN FRONT OF THE OUTLET
SIDE
When nothing is obstructing the top
1. Installation of single unit (Refer to figure 6-[1])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 6-[2])
When something is obstructing the top
1. Installation of single unit (Refer to figure 6-[3])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 6-[4])
(7)-3 IN CASE OBSTACLES EXIST IN FRONT OF BOTH THE
AIR INLET AND OUTLET SIDESPattern 1: Where obstacle in front of the air outlet is higher than the
unit.
(There is no height limit for obstructions on the intake side.)
When nothing is obstructing the top
1. Installation of single unit (Refer to figure 7-[1])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 7-[2])
When something is obstructing the top
1. Installation of single unit (Refer to figure 7-[3])
Relation of dimensions of H, A, and L are shown in the table below.
Note)
Get the lower part of the frame sealed so that air from the outlet
does not bypass.
2. Series installation (up to two units) (Refer to figure 7-[4])
Relation of dimensions of H, A, and L are shown in the table
below.
Note)
1. Get the lower part of the frame sealed so that air from the out-
let does not bypass.
2. Only two units at most can be installed in series.
Pattern 2: Where obstacles in front of the air outlet is lower than the
unit.
(There is no height limit for obstructions on the intake
side.)
When nothing is obstructing the top
1. Installation of single unit (Refer to figure 7-[5])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 7-[6])
Relation of dimensions of H, A, and L are shown in the table
below.
When something is obstructing the top
1. Installation of single unit (Refer to figure 7-[7])
Relation of dimensions of H, A, and L are shown in the table
below.
Note)
Get the lower part of the frame sealed so that air from the outletdoes not bypass.
2. Series installation (up to two units) (Refer to figure 7-[8])
Relation of dimensions of H, A, and L are shown in the table
below.
Note)
1. Get the lower part of the frame sealed so that air from the out-
let does not bypass.
2. Only two units at most can be installed in series.
(7)-4 IN CASE OF STACKED INSTALLATION
1. In case obstacles exist in front of the outlet side
(Refer to figure 8-[1])
Note)
1. No more than two units should be stacked.
2. About 100 mm is required as the dimension for laying the
upper outdoor unit’s drain pipe.
3. Shut off the Z part (the area between the upper outdoor unit
and the lower outdoor unit) so that outlet air does not bypass.
2. In case obstacles exist in front of the air inlet (Refer to figure 8-[2])
Note)
1. No more than two units should be stacked.
2. About 100 mm is required as the dimension for laying the
upper outdoor unit’s drain pipe.
3. Shut off the Z part (the area between the upper outdoor unit
and the lower outdoor unit) so that outlet air does not bypass.
L A
L ≤ H0 < L ≤ 1/2H 750
1/2H < L ≤ H 1000
H < L Set the frame to be L ≤ H
L A
L ≤ H0 < L ≤ 1/2H 1000
1/2H < L ≤ H 1250
H < L Set the frame to be L ≤ H
L A
0 < L ≤ 1/2H 250
1/2H < L ≤ H 300
L A
L ≤ H0 < L ≤ 1/2H 100
1/2H < L ≤ H 200
H < L Set the frame to be L ≤ H
L A
L ≤ H0 < L ≤ 1/2H 250
1/2H < L ≤ H 300
H < L Set the frame to be L ≤ H
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 265/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 259
13
3PN07193-1B
5 English
(7)-5 IN CASE OF MULTIPLE-ROW INSTALLATION (FOR ROOF
TOP USE, ETC.)
1. In case of installing one unit per row (Refer to figure 9-[1])
2. In case of installing multiple units (2 units or more) in lateral con-
nection per row (Refer to figure 9-[2])
Relation of dimensions of H, A, and L are shown in the table
below.
5. PRECAUTIONS ON INSTALLATION
• Install making sure the unit is level and the foundation is sturdy
enough to prevent vibration noise.
• In accordance with the foundation drawing in figure 10, fix the unit
securely by means of the foundation bolts.
(Prepare four sets of M12 foundation bolts, nuts and washers
each which are available on the market.)
• The foundation bolts should be inserted 20 mm.
(Refer to figure 10)
1. Diagram of lower surface<Drain pipe disposal>
• Locations where drainage from the outdoor unit might be a prob-
lem.
In such locations, for example, where the drainage might drip onto
passersby, lay the drain piping using the separately sold drain
plug.
• When laying the drain, at least 100 mm from the bottom of the out-
door unit is needed.
• Make sure the drain works properly.
(Watch out for water leaks if piping is brought out the bottom.)
(Refer to figure 11)1. Drain plug
2. 4 tabs
3. Drain receiver
4. Insert the drain receiver as far as possible into the drain
plug and hook the tabs.5. Bottom frame drain hole
6. (1) Insert the drain plug through the drain hole in the
bottom frame shown in figure 12.
(2) Turn the drain plug along the guides until it stops
(approx. 90°), and then attach the bottom frame.
7. Guide
(Refer to figure 12)1. Air outlet side
2. Diagram of lower surface (Unit: mm)
3. Drain hole
[How to remove the transport clasp]
• A yellow transport clasp and washer are attached to the legs of
the compressor to protect the unit during transportation, so
remove them as shown in figure 13.
(Refer to figure 13)
1. Compressor2. Securing nut
3. Washer
4. Transport clasp
5. Turn in the direction of the arrow and remove.
6. Sound-proof cover
7. Do not remove with the cover open.
(1) Open the sound-proof cover as shown in figure 13.
Do not pull the sound-proof cover or remove it from the compres-
sor.
(2) Remove the securing nut.
(3) Remove the washer.
(4) Remove the transport clasp as shown in figure 13.
(5) Retighten the securing nut.
(6) Return the sound-proof cover as it was.
6. FIELD WIRING
Caution
To the electrician
• Do not operate until refrigerant piping work is completed.
(If operated before complete the piping work, the compressor
may be broken down.)• Be sure to install an earth leakage circuit breaker.
(This unit uses an inverter, so install the earth leakage circuit
breaker that be capable of handling high harmonics in order to
prevent malfunctioning of the earth leakage circuit breaker
itself.)
6-1 Wiring connection example for whole system
• Electrical wiring work should be done by a certified professional.
• Follow the “Electrical wiring diagram face plate” when carrying out
any electrical wiring.
Only proceed with wiring work after blocking off all power.
• Make sure the ground resistance is no greater than 4Ω .
• Attach a ground-fault circuit interrupter.
• Ground the indoor and outdoor units.
• Do not connect the ground wire to gas pipes, sewage pipes, light-
ning rods, or telephone ground wires.
• Gas pipes: can explode or catch fire if there is a gas leak.
• Sewage pipes: no grounding effect is possible if hard plastic
piping is used.
• Telephone ground wires and lightning rods: dangerous
when struck by lightning due to abnormal rise in electrical poten-
tial in the grounding.
• Use copper wire.
• When doing the electrical wiring, always shut off the power source
before working, and do not turn on the switch until all work is com-
plete.
• This unit has an inverter, so it must be grounded in order to reduce
noise and prevent it affecting other appliances, and also to
release any electrical build-up in the unit case due to leaked cur-
rent.
• Do not install a power-factor improving phase-advancing capaci-
tor under any circumstances.
(Not only will this not improve the power factor, but it might cause
a fire.)
• Connect the wire securely using designated wire and fix it with
attached clamp without applying external pressure on the termi-
nal parts (terminal for power wiring, terminal for transmission wir-
ing and earth terminal). See “6-3 How to connect the power
supply wiring”.
• Left-over wiring should not be wrapped and stuffed into the unit.
• To prevent the power wiring from being damaged by the knock
hole edges, put it in a wiring pipe or plastic tube to protect it.
• Secure the wiring with the included clamp so that it does not come
in contact with the piping or shutoff valve.
(See “6-3 How to connect the power supply wiring”.)
Caution
• Use a power wire pipe for the power supply wiring.
• Outside the unit, make sure the weak electric wiring (i.e. for the
remote controller cord, between units, etc.) and the strong elec-tric wiring do not pass near each other, keeping them at least
50 mm apart.
Proximity may cause electrical interference, malfunctions, and
breakage.
• Be sure to connect the power wiring to the power wiring terminal
block and secure it as described in “6-3 How to connect the
power supply wiring”.
• Interunit wiring should be secured as described in “6-4 Inter-
unit wiring connection procedure”.
• Secure wiring with clamp (accessory) to avoid contact with pip-
ing.
• Make sure the wiring and the front panel do not stick up above
the structure, and close the cover firmly.
L A
L ≤ H0 < L ≤ 1/2H 250
1/2H < L ≤ H 300
H < L Installation impossible.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 266/308
Installation Manual EDMT34-635A
260 Installation of Outdoor Units
3PN07193-1B
English 6
(Refer to figure 14)1. Branch switch and over-current interrupter (ground-fault
circuit interrupter)
2. Power supply
3. Outdoor unit
4. 16V
5. 220-240V
6.Indoor unit
7. Remote controller.
8. Ground wire
6-2 How to lay the power supply wiring and trans-mission wiring
Pass the power supply wiring (including the ground wire) through the
holes on the side, front, or back of the unit.
The interunit wiring should be passed through the wiring hole, the
piping out-hole, or the knock hole on the front of the unit.
Precautions when knocking out knock holes
• Open the knock holes with a hammer or the like.
• After knocking out the holes, we recommend you remove burrs in
the knock holes and paint the edges and areas around the edges
using the repair paint to prevent rusting.
• When passing wiring through knock holes, make sure there are
no burrs, and protect the wiring with protective tape.
(Refer to figure 15)1. Shutoff valve attachment plate
2. Interunit wiring
3. Connecting electrical wiring (including ground wire)
4. Backward
5. Knockout hole
6. Sideways
7. Set apart
8. Forward
9. Clamp (accessory)
10. Terminal block
11. Control box
<Precautions when laying power wiring>
• Wiring of different thicknesses cannot be connected to the power
terminal block.
(Slack in the power wiring may cause abnormal heat.)
• Use sleeve-insulated round pressure terminals for connections to
the power terminal block. When none are available, connect wire
of the same diameter to both sides, as shown in the figure.
Follow the instructions below if the wiring gets very hot due to
slack in the power wiring.
• For wiring, use the designated power wire and connect firmly,
then secure using the included clamping material to prevent out-
side pressure being exerted on the terminal board.
• Use an appropriate screwdriver for tightening the terminal screws.
A screwdriver with a small head will strip the head and make
proper tightening impossible.
• Over-tightening the terminal screw may break it.
See the table below the tightening torque of the terminal screws.
6-3 How to connect the power supply wiring
Caution
Attach a ground-fault circuit interrupter.
• A ground-fault circuit interrupter is required in order to prevent
electric shock and fires.
Caution
• The wiring should be selected in compliance with local specifi-
cations. See the table above.
• Comply with IEC60245 as regards individual specifications for
local power supply wiring.
• Use H05VV as the power supply wiring if a wiring conduit isbeing used.
• If a conduit cannot be used, then use H07RNF.
• Always turn off the power before doing wiring work.
• Grounding should be done in compliance with local laws and
regulations.
• Attach a ground-fault circuit interrupter.
(This unit has an inverter, so an interrupter capable of handling
high frequencies is needed to prevent malfunction of the inter-
rupter itself.)
• As shown in figure 16, when connecting the power supply wiring
to the power supply terminal block, be sure to clamp securely.
• Once wiring work is completed, check to make sure there are no
loose connections among the electrical parts in the control box.
(Refer to figure 16)1. Control box
2. Ground position3. Clamp (accessory)
4. Shutoff valve attachment plate
5. Connecting electrical wiring
6. Ground wire (Yellow/Green)
7. Terminal block (X1M)
8. Pass through included clamp.
9. Interunit wiring
10. (To X2M [TO IN/ D UNIT] (F1, F2))
11. Terminal block (X2M)
If small animals might enter the
unit, block the knock holes with an
appropriate material (field supply).
Burr
Insulating sleeve
Round crimp-style
terminal Electric Wire
Connect wires
of the same gauge
to both side.
Do not connect
wires of different
gauges.
Do not connect
wires of the same
gauge to one side.
Tightening torque (N·m)
M5 Power terminal 2.39~2.91
M4 Shield ground 1.18~1.44
M3 Transmission wiring terminal block 0.8~0.97
Model name Frequency VoltageRated cur-
rent for fuses
Maximum
outdoor unit
operating
current
RXYMQ4PV4A ~50Hz 230-240V 30A 27.0A
RXYMQ5PV4A ~50Hz 230-240V 30A 27.0A
RXYMQ6PV4A ~50Hz 230-240V 30A 27.0A
Model name Frequency VoltageRated cur-
rent for fuses
Maximum
outdoor unit
operating
current
RX(Y)MQ4PVE ~50/60Hz 220-230V/220V 30A 27.0A
RX(Y)MQ5PVE ~50/60Hz 220-230V/220V 30A 27.0A
RX(Y)MQ6PVE ~50/60Hz 220-230V/220V 30A 27.0A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 267/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 261
13
3PN07193-1B
7 English
6-4 Interunit wiring connection procedure
• Between indoor units in the same system, pass the wiring
between the units as shown in figure 17. (There is no polarity.)
(Refer to figure 17)1. Terminal block (X2M)
2. Use balance type shield wire (with no polarity).
3. Indoor unit
4. Under no circumstances should 220-240V be con-
nected.
Precautions regarding the length of wiring between units
Exceeding the following limits may cause transmission malfunctions,
so observe them.
Max. wiring length Max. 300 m
Total wiring length Max. 600 m
Max. no. of branches 9
Precautions regarding wiring between units
• Do not connect 220-240V power wiring to terminals for the
interunit wiring. Doing so would destroy the entire system.
• Wiring to the indoor unit should be wired to F1 and F2 (TO IN/D
unit) on the outdoor unit’s terminal block (X2M).
• The interunit wiring should be secured inside the unit and then fin-
ished by being wrapped with tape at the same time as the on-site
refrigerant piping, as shown in figure 18.
(Refer to figure 18)1. Liquid pipe
2. Finishing tape
3. Insulation material
4. Interunit wiring
5. Gas pipe
Note
• The above wiring should be wired using 0.75 – 1.25 mm2 shielded
(balance type) wiring.(See figure 16 for how to ground the shielded parts.)
• All interunit wiring is to be procured on site.
Caution
Up to 9 branches are available in the wiring among units.
Branch after branch cannot perform wiring between units.
(Refer to figure 19)1. Branch
2. Branches after branch points
3. Caution on branches in the wiring among units
7. PRECAUTIONS ON REFRIGERANTPIPING
Caution
To the pipe-layer
• Do not operate the unit with the transport clasp attached. This
can cause abnormal shaking or noise. See “5. PRECAUTIONS
ON INSTALLATION” and “How to remove the transport clasp”.
7-1 Installation tools
Use the right par ts to ensure tolerance and to prevent foreign matter
for entering.
Gauge manifold, charge hose, etc.
• Make sure to use installation tools that are exclusively used for
R410A installations to withstand the pressure and to prevent for-
eign materials (e.g. mineral oils such as SUNISO and moisture)
from mixing into the system.
(The screw specifications differ for R410A and R407C.)
Vacuum pump
• Use extreme caution to prevent pump oil from flowing back-
wards through the system when the pump is stopped.
• Use a vacuum pump which can evacuate to –100.7 kPa (5Torr,
–755mmHg).
7-2 Selecting piping material
• Use pipes that have no contaminants adhered to their inner surfaces
(such as sulfur, iron oxide, dust, cutting chips, oil and moisture). (It isdesirable that adhered oil inside the piping is 30mg or less per 10m.)
• The wall thickness of the refrigerant piping should comply with local
laws and regulations. The design pressure for R410A is 4.0MPa.• Use the following material for the refrigerant piping.
Material: Jointless phosphor-deoxidized copper pipe.• Thickness and size: choose based on the piping size selection
method on the “7-8 Air tight test and vacuum drying”.• Make sure to use the separately sold refrigerant branch kit when
branching the piping.• Piping work should be done within the maximum length, height
difference, and length after branches set out in “7-8 Air tight testand vacuum drying”.
• Install the refrigerant branch kit while observing the following con-dition and referring to the installation manual offered as an acces-sory of the kit.
(Refer to figure 20)1. Install the REFNET joint so it splits horizontally or vertically.
2. Horizontal surface
3. A-arrow view
4. ±30° or less
5. Level
6. Vertical is also OK7. Install the REFNET header so that it splits horizontally.
8. B-arrow view
7-3 Protection against contamination wheninstalling pipes
• Wrap the piping to prevent moisture, dirt, dust, etc. from entering
the piping.
• Exercise caution when passing copper piping through the
through-holes and when passing them out to the outside.
7-4 Pipe connection• See “Shutoff valve operation procedure” in “7-8 Air tight test and
vacuum drying” regarding handling of the shutoff valve.
• Only use the flare nuts included with the unit. Using different flare
nuts may cause the refrigerant to leak.
• Be sure to perform a nitrogen blow when brazing.
(Brazing without performing nitrogen replacement or releasing
nitrogen into the piping will create large quantities of oxidized film
on the inside of the pipes, adversely affecting valves and compres-
sors in the refrigerating system and preventing normal operation.)
NoteThe nitrogen used when brazing while flowing the nitrogen should be
set to 0.02 MPa (0.2 kg/cm2
: just enough to feel a breeze on your
cheek) with the decompression valve.
• Do not mix any refrigerant other than that specified into the refrig-
erant system.
• Do not mix air into the refrigerant system.Caution
Do not use a flux when brazing the refrigerant pipe joints.
Use phosphor copper brazing (BCuP-2: JIS Z 3264/B-Cu93P-
710/795: ISO 3677) which does not require flux.
(Using a chlorine flux may cause the pipes to corrode, and if it
contains fluoride it may cause the refrigerant lubricant to deterio-
rate, adversely affecting the refrigerant piping system.)
(Refer to figure 21)1. Refrigerant pipe
2. Location to be brazed
3. Regulator
4. Nitrogen
5. Manual valve
6. Taping
Place Installation period Protection method
OutdoorMore than a month Pinch the pipe
Less than a monthPinch or tape the pipe
Indoor Regardless of the period
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 268/308
Installation Manual EDMT34-635A
262 Installation of Outdoor Units
C: 3PN07193-1B
English 8
7-5 Connecting the refrigerant piping
• The local interunit piping is connectable in four directions.
(Refer to figure 22)1. Front panel
2. Pipe outlet panel
3. Backward
4. Sideways
5. Downward
6. Pipe outlet panel screw
7. Forward
8. Screw for front panel
• When connecting in a downward direction, make four round holes
using a 6-mm iameter drill in the central section around the knock
hole and open the knock hole.
(Refer to figure 23)1. Dril
2. Center area around knockout hole
3. Knockout hole
4. Slit
• After knocking out the knock-out, it is recommended to apply
repair paint to the edge and the surrounding end surfaces to pre-
vent rusting.
(Refer to figure 24)1. Bottom frame
2. Interunit piping
NoteCutting out the two slits makes it possible to install as shown in fig-
ure 24. (Use a metal saw to cut out the slits.)
<Precautions when connecting pipes>
• Please refer to the Table 1 for the dimensions for processing
flares.
•
• Please refer to the Table 1 for the tightening torque. (Too much
tightening will end up in splitting of the flare.)
Table 1
• If a torque wrench is not available, there is a place where the tight-
ening torque will suddenly increase if a normal wrench is used to
tighten the flare nut.
From that position, further tighten the flare nut the angle shown
below.
• After all the piping has been connected, use nitrogen to perform a
gas leak check.
Q6 type
(Refer to figure 25-[1])1. Front connection
2. Gas side accessory pipe (1)
3. Gas side accessory pipe (3)
4. Gas side piping (field supply)
5. Cut at an appropriate length.
6. Gas side accessory pipe (2)(Refer to figure 25-[2])
1. Rear-side connection
2. Gas side accessory pipe (1)
3. Gas side accessory pipe (2)
4. Gas side accessory pipe (3)
5. Gas side piping (field supply)
(Refer to figure 25-[3])1. Side connection
2. Gas side accessory pipe (2)
3. Cut at an appropriate length.
4. Gas side piping (field supply)
5. Gas side accessory pipe (3)
6. Gas side accessory pipe (1)
(Refer to figure 25-[4])1. Bottom connection
2. Cut at an appropriate length.3. Gas side piping (field supply)
4. Gas side accessory pipe (3)
5. Gas side accessory pipe (1)
Precautions for connecting pipes
• Be careful not to let the interunit piping come into contact with the
compressor terminal cover.
Adjust the height of the insulation material on liquid pipe when it
has the possibility of getting in contact with the terminal. Also
make sure that the interunit piping does not touch the mounting
bolt of the compressor.
(Refer to figure 27)1. Terminal cover
2. Compressor
3. Corking, etc.
4. Insulation material
5. Bolts
6. Interunit piping
• If installing the outdoor unit higher than the indoor unit, caulk the
space around insulation and tubes because condensation on the
check valve can seep through to the indoor unit side.
[Preventing foreign objects from entering]
• Plug the pipe through-holes with putty or insulating material (pro
cured locally) to stop up all gaps, as shown in figure 26.
(Insects or small animals entering the outdoor unit may cause a
short in the control box.)
(Refer to figure 26)1. Putty or insulating material
2. (field supply)
7-6 Heat insulation of piping
• If you think the humidity inside the ceiling might exceed 30°C and
RH80%, reinforce the insulation on the cooling piping. (At least
20 mm thick) (Condensation may form on the surface of the insu-
lation.)
• Be sure to insulate the interunit piping (liquid and gas-side) and
the refrigerant branch kit. (Not insulating them may cause leak-
ing.)
(The highest temperature that the gas-side piping can reach is
around 120°C, so be sure to use insulating material which is very
resistant.)
When connecting the flare nut, coat the flare inside withrefrigerating machine oil and initially tighten by hand 3 or 4 turnsbefore tightening firmly.
Caution
For local insulation, be sure to insulate all the way to the pipe con-
nections inside the machine.
Exposed piping may cause leaking or burns on contact.
Pipe sizeTightening
torque (N·m)
A dimen-sions for
processing
flares (mm)
Flare shape
φ 9.5 32.7~39.9 12.8~13.2
φ 15.9 61.8~75.4 19.3~19.7
φ 19.1 97.2~118.6 23.6~24.0
Pipe size Further tightening angleRecommended arm length
of tool
φ9.5 60°~ 90 ° Approx. 200 mm
φ15.9 30°~ 60° Approx. 300mm
φ19.1 20°~ 35° Approx. 450mm
A 4 5 ˚ ±
2 ˚
9 0 ˚ ± 2 ˚ R0.4~0.8
Refrigerant oil
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 270/308
Installation Manual EDMT34-635A
264 Installation of Outdoor Units
3PN07193-1B
English 10
7-8 Air tight test and vacuum drying
After doing the piping, perform the following inspections.
Be sure to use nitrogen gas. (See the figure (“Shutoff valve operation
procedure”) for the location of the service port.)
[Procedure]Pressurize from the liquid pipes and gas pipes to 4.0 MPa (and not
above 4.0 MPa). If there is not pressure drop over the next 24 hours,
the equipment has passed the test.
If the pressure drops, check for leakage positions. (Confirm that there
is no leakage, then release nitrogen.)
Use a vacuum pump that can create a vacuum down to at least
–100.7 kPa (5 Torr, –755 mmHg).
[Procedure]
Operate the vacuum pump for at least 2 hours from both the liquid
and gas pipes and decrease the pressure to at least –100.7 kPa.
Leave at below –100.7 kPa for at least 1 hour and make sure that the
vacuum gauge does not rise. (If it does rise, there is either still mois-
ture in the system or a leak.)
Cases where moisture might enter the piping (i.e., if doing workduring the rainy season, if the actual work takes long enough that
condensation may form on the inside of the pipes, if rain might enter
the pipes during work, etc.)
After performing the vacuum drying for 2 hours, pressurize to
0.05 MPa (i.e., vacuum breakdown) with nitrogen gas, then depres-
surize down to at least –100.7 kPa for an hour using the vacuum
pump (vacuum drying). (If the pressure does not reach at least
–100.7 kPa even after depressurizing for at least 2 hours, repeat the
vacuum breakdown - vacuum drying process.) Leave as a vacuum
for 1 hour after that, and make sure the vacuum gauge does not rise.
(Refer to figure 28)1. Decompression valve
2. Nitrogen
3. Vacuum pump
4. Valve (Open)
5. Charge hose
6. Shutoff valve service port
7. Indoor unit
8. Gas line shutoff valve (Close)
9. Liquid line shutoff valve (Close)
10. Indicates local procurement
11. Outdoor unit
NoteThe shutoff valve must always be turned to “closed”.
Otherwise the refrigerant in the outdoor unit will pour out.
• The names of parts needed to operate the shutoff valve are
shown in the figure below. The unit is shipped from the factory
with the shutoff valve turned to the “closed” position.
• Since the side boards may be deformed if only a torque wrench is
used when loosening or tightening flare nuts, always lock the
shutoff valve with a wrench and then use a torque wrench.
• In cases where the unit is run in heating mode when the outside
temperature is low or in other situations where the operating pres-
sure might drop, seal the gas-side flare nut on the shutoff valve
with silicon sealant or the like to prevent it from freezing.
Shutoff valve operation procedure
Have a hex wrench ready (size: 4 mm and 6 mm).
Opening the valve
1. Place the hex wrench on the valve bar and turn counter-clock-
wise.
2. Stop when the valve bar no longer turns. It is now open.
Close the valve
1. Place the hex wrench on the valve bar and turn clockwise.
2. Stop when the valve bar no longer turns. It is now closed.
• A seal is attached to the point indicated by the arrow.
Take care not to damage it.
• Be sure to tighten the valve lid securely after operating the valves.
• Use a push-rod-provided charging hose for operation.
• Be sure to tighten the valve lid securely after operation.
Tightening torque .......... 10.8 ~ 14.7 N·m
8. ADDITIONAL REFRIGERANTCHARGE
Warning
• When leaving the unit with the power on, be sure to
switch with another person doing the installation or
close the front panel.
Air tight test
Vacuum drying
Shutoff valve operation procedure
Precautions when handling the shutoff valve
Servicing port
Valve bar
Valve lid
Interunit piping connection
Precautions for handling valve lid
Liquid-side tightening torque Gas-side tightening torque
13.5 ~ 16.5 N·m 22.5 ~ 27.5 N·m
Precautions for handling servicing port
Silicon sealing pad
(Make sure that there is no gap)
Direction to open Direction to open
<Gas pipe><Liquid pipe>
Valve lid
Shutoff valve(lid attachment)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 271/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 265
13
3PN07193-1B
11 English
8-1 Before adding refrigerant
• Make sure the following work and inspection is complete, in
accordance with the installation manual.
• Piping
• Wiring
• Airtightness test, Vacuum drying
8-2 Checking the refrigerant tank
• Check whether the tank has a siphon pipe before charging and
place the tank so that the refrigerant is charged in liquid form.
(See the figure below.)
8-3 Adding refrigerant
9. POST-WORK CHECKS
Perform the following checks after work is complete.
(1) Drain pipe connection, removal of transport clasp →
See “5. PRECAUTIONS ON INSTALLATION”.
(2) Incorrect power supply wiring, loose screws →
See “6-3 How to connect the power supply wiring”.
(3) Incorrect interunit wiring, loose screws→
See “6-4 Interunit wiring connection procedure”.
(4) Incorrect refrigerant piping connections →
See “7. PRECAUTIONS ON REFRIGERANT PIPING”.
(5) Piping sizes, use of insulation→
See : “7-2 Selecting piping material”.
“7-6 Heat insulation of piping”.
(6) Shutoff valve check →
Make sure both the liquid-side and gas-side shutoff valves are
open.
(7) Record of Amount of Refrigerant Added →
Record it on “Record of Amount of Refrigerant Added” on the
“Service Precautions” plate.
(8) Measuring the insulation of the main power circuit →
• Use a 500V mega-tester.
• Do not use the mega-tester for weak currents other than 220-
240V. (Interunit wiring)
Caution
To the pipe-layer
After completing installation, be sure to open the valve.
(Operating the unit with the valve shut will break the compressor.)
10. TEST RUN
This unit is equipped with a crank case heater to ensure smooth
startup. Be sure to turn the power on at least 6 hours before
operation in order to have power running to the crank case
heater.
Warning
When leaving the unit with the power on, be sure to
switch with another person doing the installation or
close the front panel.
Precautions before turning the power on
• Using insulating sheets, tape electric parts as described in the
“Service Precautions” plate on the back of the front panel.
• All indoor units connected to the outdoor unit operate automati-
cally.
Complete work on the indoor units in order to ensure maximum
safety.
10-1 Power On–Check Operation• Make sure to perform the check operation after installation.
(If the air conditioner is operated using the indoor remote control-
ler without performing the check operation, the malfunction code
“U3” is displayed in the indoor remote controller, and normal oper-
ation is disabled.)
• When making settings on the outdoor unit PC board (A2P) after
turning the power on, do not touch anything other than the push-
button switches and dip switches.
(See the “Service Precautions” plate for the locations of the push-
button switches (BS1-5) and dip switches (D1-1, 2) on the PC
board (A2P).)
Tank with siphon pipe Other tanks
There is a siphonpipe inside, so the
cylinder need not beupside-down to fillwith liquid.
(Stand the cylinderupright when filling.)
Stand the tankupside down andcharge.
1. Calculate the amount of refrigerant to add as described in “Calculating the amount of refrigerant to add” in“7. PRECAUTIONS ON REFRIGERANT PIPING”.
2. After the vacuum drying is finished, open valve A and charge the calculated amount of refrigerant throughthe service port for the liquid-side shutoff valve.
3. Close valve A after charging is complete.Note: If all the refrigerant to be added cannot be charged using the above procedure, right-hand the procedure
below and re-charge the refrigerant.
If all the refrigerant could not be addedAdd refrigerant using the following procedure. See the “Service Precautions” plate attached to the control box lid onthe outdoor unit for details on the settings for adding refrigerant.[Procedure]1. Close the front panel and turn on the power to all outdoor units and indoor units in the refrigeration system.2. Open the gas and liquid-side shutoff valves all the way and add the refrigerant. (Open valve A immediately after starting the compressor.)3. Once the appropriate amount of refrigerant is in, press the confirmation button (BS3) on the outdoor unit PC
board (A2P), and stop operation after adding the refrigerant.
4. Close valve A after charging is complete.
Filling after calculating the amount of refrigerant to add
• See “Shutoff valve operation procedure” in “7. PRECAUTIONS ON REFRIGERANT PIPING ” for details on how to use the shutoff valve.• Connect the service port (for charging refrigerant) inside the unit. When the unit is shipped from the factory,
refrigerant is already charged, so be careful when connecting the charge hose.• After adding the refrigerant, do not forget to close the lid of the service port (for adding refrigerant).
The tightening torque of the lid is 11.5 – 13.9 N/m.(Refer to figure 30)1. Gas line shutof f valve 2. L iquid l ine shuto ff va lve 3. Shuto ff va lve service port4. Indoor unit 5. Measuring instrument 6. R410A Tank (Siphon system)7. Valve A 8. Service port 9. (For adding refrigerant)10. Outndoor unit
Status of the shutoff valve and other valves when adding refrigerant operation
State of valve A and the shutoff valve Valve ALiquid lineshutoff valve
Gas lineshutoff valve
Close
Open Open Open
Open OpenBefore starting to charge the refrigerant
During charging of the refrigerant
• See “Shutoff valve operation procedure” in “ 7. PRECAUTIONS ON REFRIGERANT PIPING” fordetails on how to use the shutoff valve.(Refer to figure 29)
1. R410A Tank (Siphon system) 5. Shutoff valve service port 2. Measuring instrument 6. Gas line shutoff valve 3. Valve A 7. Outdoor unit 4. Indoor unit 8. Liquid line shutoff valve
Status of the shutoff valve and other valves when adding refrigerant
State of valve A and the shutoff valve Valve ALiquid lineshutoff valve
Gas lineshutoff valve
Close Close Close
Close CloseOpen
Before starting to charge the refrigerant
During charging of the refrigerant
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 272/308
Installation Manual EDMT34-635A
266 Installation of Outdoor Units
3PN07193-1B
English 12
• During the operation, monitor the outdoor unit operation status
and check for any incorrect wiring.
<Precautions During Check Operation>
• If operation is performed within 12 minutes of the indoor and
outdoor units being turned on, H2P will light up, and the
compressor will not run.Only perform operation after checking that the LED display is as
shown in “10-1 Power On–Check Operation” 2. table.
• In order to ensure uniform refrigerant distribution, it may take up to
around 10 minutes for the compressor to start up after the unit
begins running. This is not a malfunction.
• Each indoor unit cannot be checked individually for problems.
After this operation is complete, run the unit normally using the
remote controller.
• The check run cannot be performed in recovery or other modes.
• If the outlet pipe thermistor (R2T), the intake pipe thermistor
(R3T), and the pressure sensors (S1NPH and S1NPL) are
removed before operation, the compressor might burn out, so
avoid this under all circumstances.
10-2 Temperature control operation checklist
[Set the master unit (the indoor unit with rights of selection
cooling or heating)]
<With a wired remote controller>
• After check operation is complete, displays of all the connected
remote controllers will flash “Switching mode”.
• Ask the customer which indoor unit to set as the master unit.
(Setting the most frequently used indoor unit as the master unitis recommended.)
• Press the mode-switch button on the remote controller for the
master unit.
• That remote controller will then become the remote controller for
switching between cooling and heating.
• All other remote controllers will display “Switching mode”.
<With wireless remote controller>
• After check operation is complete, the timer lamps on all the
indoor units which are connected will flash.
• Ask the customer which indoor unit to set as the master unit.
(Setting the most frequently used indoor unit as the parent unit
is recommended.)
• Press the mode-switch button on the remote controller for the
master unit.
A beeping sound will be emitted and the timer lamps on all the
indoor units will go off.• That indoor unit will be the indoor unit which has the right to
switch between cooling and heating.
For details, see the operation manual which comes with the unit.
• After check operation is complete, checking the temperature con-
trol using normal operation.
(Heating is not possible if the outdoor temperature is 24°C or
higher. See the included operation manual.)
(1) Make sure the indoor and outdoor units are operating nor-
mally.
(If liquid compression by the compressor or other abnormal
noises can be heard, stop the unit immediately, heat the
crank case for a sufficient amount of time, and try again.)
(2) Run each indoor unit one at a time and make sure the corre-
sponding outdoor unit is also running.
(3) Check to see if cold (or hot) air is coming out of the indoor
unit.
(4) Press the fan direction and fan strength buttons on the indoor
unit to see if they operate properly.
<Precautions during temperature control checks>
• For around 5 minutes after the compressor stops, the compressor
will not run even if the “operate/stop” button on the remote control-
ler is pressed.
• When the system operation is stopped by the remote controller,
the outdoor units may continue operating for further 1 minutes at
maximum.
• Malfunction code “U3” is displayed if check operation is not per-
formed using the test run button the first time after installation.
Perform the check operation in accordance with “10-1 Power On–
Check Operation”.
1. Close the outdoor unit’s front panel.Turn the power on for the outdoorunit and the indoor unit.
2. • Open the outdoor unit’s front panel.
• Make sure the LED display on the outdoor unit’s PC boards (A1P and
A2P) are as shown in the following chart.
LED display(Default statusbefore delivery)
SEVICEMONITOR MODE
HAP
A1P A2P
H1P H2P H3P H4P H5P H6P H7P
TEST/
HWLIND MASTER SLAVE L.N.O.P DEMAND
6. Close the outer panel of the outdoor unit after check operation is complete.
Do not leave any shutoff valve closedotherwise the compressor will fail.
Caution
Be sure to turn the power on at least6 hours before operation in order to havepower running to the crank case heater.
To avoid the risk of electric shock, do not touch anything other than thepush-button switches on the PC board (A2P) when making settings.
Caution
LED display: OFF ON Blinking
Use caution to avoid electric shock whileworking, since the outdoor unit is on.
• Only set the push-button switches (BS1-5)after making sure the microcomputer OKmonitor is lit up.
• See the “Service Precautions” plate on thefront panel of the outdoor unit for details onhow to make the settings.(Do not forget to write the settings down onthe “Service Precautions” plate.)
• The dip switch (DS1-1) does not need to beset, so do not t ouch it.Doing so may cause malfunction.
• If you have to leave the outdoor unit during check operation,either switch with another worker or close the front panel.
• The system operates for about 30 minutes (60 minutes atmaximum) and automatically stops the check operation.
• The system can start normal operation about3 minutes after the check operation if theremote controller does not display any error code.The remote controller will show the test rundisplay during check operation.
3. • When the customer requestsquiet operation or demandoperation, make these settingsusing the push-button switches(BS1-5) on the outdoor unit’sPC board (A2P).
• Operate the push-buttonswitches through the openingafter protecting it with aninsulation cover.
(See the “Service Precautions”plate for details.)
4. • Check that the liquid and gas-sideshutoff valves are open, and ifthey are closed, open them.
5. Press the test run button (BS4) forat least five seconds and performcheck operation.For details, see “How to performcheck operation” on the “ServicePrecautions” plate.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 273/308
EDMT34-635A Installation Manual
Installation of Outdoor Units 267
13
3PN07193-1B
13 English
[Remote controller displays malfunction code]
(Check on a remote controller connected to the indoor unit.)
• When using a central controller, see the installation manual or
service manual which came with the central controller.
[If nothing is displayed on the remote controller]
• There might be a problem with the connections or communicationbetween the indoor unit and the remote controller.
Make sure all the wiring is properly connected.
Caution
To the pipe-layer, To the electrician
After the test run, when handing the unit over to the customer,
make sure the front panel on the unit and all screws are attached.
11. CAUTION FOR REFRIGERANT LEAKS
(Points to note in connection with refrigerant leaks)
Introduction
The installer and system specialist shall secure safety againstleakage according to local regulations or standards. The follow-ing standards may be applicable if local regulations are not
available.The VRV System, like other air conditioning systems, uses R410A asrefrigerant. R410A itself is an entirely safe non-toxic, non-combusti-ble refrigerant. Nevertheless care must be taken to ensure that airconditioning facilities are installed in a room which is sufficientlylarge. This assures that the maximum concentration level of refriger-ant gas is not exceeded, in the unlikely event of major leak in the sys-tem and this in accordance to the local applicable regulations andstandards.
Maximum concentration level
The maximum charge of refrigerant and the calculation of the maxi-mum concentration of refrigerant is directly related to the humanlyoccupied space in to which it could leak.
The unit of measurement of the concentration is kg/m3 ( the weight in
kg of the refrigerant gas in 1m3 volume of the occupied space).
Compliance to the local applicable regulations and standards for themaximum allowable concentration level is required.
In Australia the maximum allowed concentration level of refrigerant to
a humanly space is limited to 0.44 kg/m3 for R410A.
Pay a special attention to the place, such as a basement, etc.where refrigerant can stay, since refrigerant is heavier than air.
Procedure for checking maximum concentration
Check the maximum concentration level in accordance with steps 1to 4 below and take whatever action is necessary to comply.
1. Calculate the amount of refrigerant (kg) charged to each systemseparately.
Note• Where a single refrigerant facility is divided into 2 entirely inde-
pendent refrigerant systems then use the amount of refrigerantwith which each separate system is charged.
2. Calculate the smallest room volume (m3)
Incase like the following, calculate the volume of (A), (B) as a sin-gle room or as the smallest room.
A.Where there are no smaller room divisions
Malfunc-tion code
Installation error Remedial action
E3
The shutoff valve of an outdoorunit is left closed.
Open the gas-side shutoff valve and theliquid-side shutoff valve.
Refrigerant overcharge.
Recalculate the required amount of refrig-erant from the piping length and correctthe refrigerant charge level by recoveringany excessive refrigerant with a refriger-ant recovery machine.
F6 Refrigerant overcharge.
Recalculate the required amount of refrig-erant from the piping length and correctthe refrigerant charge level by recoveringany excessive refrigerant with a refriger-ant recovery machine.
E4
The shutoff valve of an outdoorunit is left closed.
Open the gas-side shutoff valve and theliquid-side shutoff valve.
Insufficient refrigerant.
Check if the additional refrigerant chargehas been finished correctly.
Recalculate the required amount of refrig-erant from the piping length and add anadequate amount of refrigerant.
F3
Refrigerant overcharge.
Recalculate the required amount of refrig-erant from the piping length and correctthe refrigerant charge level by recoveringany excessive refrigerant with a refriger-ant recovery machine.
The shutoff valve of an outdoorunit is left closed.
Open the gas-side shutoff valve and theliquid-side shutoff valve.
Insufficient refrigerant.
Check if the additional refrigerant chargehas been finished correctly.
Recalculate the required amount of refrig-erant from the piping length and add anadequate amount of refrigerant.
U2 Insufficient supply voltageCheck to see if the supply voltage is sup-plied properly.
U3If a check operation has notbeen performed.
Perform a check operation.
U4No power is supplied to an out-door unit.
Turn the power on for the outdoorunit.
UAIf no dedicated indoor unit isbeing used.
Check the indoor unit. If it is not a dedi-cated unit, replace the indoor unit.
UF
The shutoff valve of an outdoorunit is left closed.
Open the gas-side shutoff valve and theliquid-side shutoff valve.
If the right indoor unit piping andwiring are not properly con-nected to the outdoor unit.
Make sure that the right indoor unit pipingand wiring are properly connected to theoutdoor unit.
UHIf the interunit wiring has notbe connected or it hasshorted.
Make sure the interunit wiring is correctlyattached to terminals (X2M) F1/F2 (TOIN/D UNIT) on the outdoor unit circuitboard.
amount of refriger-ant in a single unitsystem (amount ofrefrigerant withwhich the systemis charged beforeleaving the factory)
+additional chargingamount (amount ofrefrigerant addedlocally in accordancewith the length ordiameter of the refrig-erant piping)
=total amountof refriger-ant (kg) inthe system
Direction of the refrigerant flow
Room whererefrigerant leakhas occurred(outflow of all therefrigerant fromthe system)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 274/308
Installation Manual EDMT34-635A
268 Installation of Outdoor Units
3PN07193-1B
English 14
B.Where there is a room division but there is an openingbetween the rooms sufficiently large to permit a free flow ofair back and forth.
(Where there is an opening without a door or where there areopenings above and below the door which are each equivalent insize to 0.15% or more of the floor area.)
3. Calculating the refrigerant density using the results of the calcu-lations in steps 1 and 2 above.
If the result of the above calculation exceeds the maximum con-centration level then make similar calculations for the second thenthird smallest room and so until the result falls short of the maxi-mum concentration.
4. Dealing with the situations where the result exceeds the maxi-mum concentration level.Where the installation of a facility results in a concentration inexcess of the maximum concentration level then it will be neces-sary to revise the system.Please consult your Daikin supplier.
total volume of refrigerant in therefrigerant system
≤ maximum concen-
tration level (kg/m3
)size (m3) of smallest room in which
there is an indoor unit installed
Opening between roomsPartition
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 275/308
EDMT34-635A REFNET Pipe System
Installation of Outdoor Units 269
13
3. REFNET Pipe System
3.1 Layout Example
3.1.1 Heat Pump / Cooling Only SeriesUse of the particular branch fitting appropriate to each individual unit type not only permits the pipes to be
laid with ease but also increases the reliability of the system as a whole.
Units can be added by connecting them directly to the REFNET header or REFNET joint. Further branches cannot be
included in the system below the REFNET header branch.
Notes:
1. When the capacity ratio of the indoor system to the outdoor unit is more than 100% and when all the indoor units
are in operation at the same time then the rated capacity of each unit will be somewhat reduced.
2. Special purpose REFNET pipe components must be used for all the pipe work. For further details concerning
choice of components, types of components, etc.
Type offitting Sample systems
L i n e b r a n c h f i t t i n g
( P i p e s c o n
t a i n i n g R E F N E T j o i n t s o n l y )
H e a d e r b r a n c h f i t t i n g
( P i p i n g c o n s i s t s o f R E F N E T h e a d e r s o n l y )
M i x e d b r a
n c h f i t t i n g s
( P i p i n g i n c l u d i n g b o
t h h e a d e r s a n d j o i n t s )
Outdoor unit Outdoor unit Outdoor unit
Indoor unit
Outdoor unit
Outdoor unit
Outdoor unit
Outdoor unitOutdoor unit
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 276/308
REFNET Pipe System EDMT34-635A
270 Installation of Outdoor Units
3.2 Max. Refrigerant Piping Length
Notes:
1. Be sure to use a REFNET piping kit for the branch of piping.
2. A branch part can not be installed to the down flow of the REFNET header.
3. When the equivalent piping length between the outdoor and indoor units exceeds 90m, the size of main pipes on
the gas side must be increased according to "Example of connection" in the installation manual.
4. Total piping length needs to be more than 10m.
1. Equivalent Piping Length of Joints and Header (Reference)
* When the equivalent piping length in cooling operation is calculated, the gas pipe size is selected.
When the equivalent piping length in heating operation is calculated, the liquid pipe size is selected.
Actual pipinglength
ExampleEquivalent
piping length
Maximumallowablepiping length
Refrigerant piping length 150 m a+b+c+d+i 175 m (Note 3)
Total piping length300 m
(Note 4)a+b+c+d+e+f+g+h+i —
Between the first indoor branch and the farthest indoor unit 40 m b+c+d+i —
LevelDifference
Example Outdoor Units
Maximum
allowablelevel difference
Between the indoor units 15 m s —
Between the outdoor unitsand the indoor units
If the outdoor unit is above. 50 m rRX(Y)MQ-PVE
If the outdoor unit is below. 40 m r
Pipe Size* (mm) φ6.4 φ9.5 φ12.7 φ15.9 φ19.1 φ22.2
L Joints (m)
0.16 0.18 0.20 0.25 0.35 0.40
REFNET Joint (m)
0.5
REFNET Header (m)
1.0
a
i
s
r
dcb
hgfeFirst indoor branch
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 277/308
EDMT34-635A REFNET Pipe System
Installation of Outdoor Units 271
13
3.3 Field Refrigerant Piping
3.3.1 Heat Pump / Cooling Only Series1. The following materials should be used for all refrigerant piping.
Materials: Deoxidized phosphorous seamless copper pipe (for external diameters of 25.4mm or more, C1220T-0
for the rest) or equivalent
2. The tips for insulation
Gas and liquid piping must be insulated. Be sure to insulate the liquid-side and gas-side piping for the inter-unit piping and the refrigerant branch kits and
always use 18-type or better insulation for the oil pressure equalizer.
Materials: Glass fiber or heat resistant polyethylene foam.
Thickness: 10mm or more
Heat resistance: Gas pipe: 120°C or more / Liquid pipe: 70°C or more
If you think the humidity around the cooling piping might exceed 30°C and RH80%, reinforce the insulation on the
cooling piping (at least 20mm thick). Condensation might form on the surface of the insulation.
Insulation of both liquid and gas pipe
Gas pipe
Transmission wiring
Insulation materialFinishing tape
Liquid pipe
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 278/308
REFNET Pipe System EDMT34-635A
272 Installation of Outdoor Units
3.4 REFNET Joints and Headers
3.4.1 REFNET JointsFor gas and liquid branch pipes
Make sure that all branch pipes are fitted such that they branch either horizontally or vertically.
When the size of the selected field piping is different from that of branch pipe then the connecting section should
be cut with a pipe cutter as shown in the f igure below.
When you are cutting an inlet or outlet pipe with a pipe cutter make sure that you make the cut in the center of the
connection area.
Branch pipes must be insulated in accordance with the handbook which comes with each kit.
3.4.2 REFNET Headers
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 279/308
EDMT34-635A REFNET Pipe System
Installation of Outdoor Units 273
13
When the number of indoor units to be connected to the branch pipes is less than the number of branch pipes
available for connection then cap pipes should be fitted to the surplus branches.
When the size of the selected field piping is different from that of branch pipe then the connecting section should
be cut with a pipe cutter as shown in the f igure below.
When field piping is connected to the B section of the inlet/outlet pipe on the outdoor unit side of the liquid pipe
header.
Cut the B section with a pipe cutter as shown below and connect it to the A section.
Connect the flared section of the field pipe to the B section.
Fit the branch pipe so that the branch lies in a horizontal plane.
The branch pipe must be insulated in accordance with the instruction manual which comes with each kit.
1. Use the insulator included in the kit to insulate the header.
2. Joints between insulators included in the kit and those already applied to the field piping should be sealed with the
tape which is also included in each kit.
3. Any cap pipes should also be insulated using the insulator provided with each kit and then taped as described
above.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 280/308
REFNET Joint and Header EDMT34-635A
274 Installation of Outdoor Units
4. REFNET Joint and Header
4.1 REFNET Joint (Branch Kit)
KHRP26A22T
I.D. φ12.7
338
I.D. φ15.9
I.D. φ6.4
(42)
250
I.D. φ9.5
380
I.D. φ12.7
I.D. φ12.7
I.D. φ9.5
(40)
I.D. φ9.5
I.D. φ15.9
I.D. φ15.9
8 0
O.D. φ15.9 I.D. φ19.1
80
I.D. φ6.4
290
I.D. φ19.1
8 0
O.D. φ19.1
I.D. φ22.2
100
LIQUID SIDE JOINT
INSULATION
INSULATION
Unit (mm)GAS SIDE JOINT
D3K05234A
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 281/308
EDMT34-635A REFNET Joint and Header
Installation of Outdoor Units 275
13
2P182411
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 282/308
REFNET Joint and Header EDMT34-635A
276 Installation of Outdoor Units
2P182411
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 283/308
EDMT34-635A REFNET Joint and Header
Installation of Outdoor Units 277
13
4.2 REFNET Header (Branch Kit)
KHRP26M22H Unit (mm)
KHRP26M33H Unit (mm)
I.D. φ12.7
3-I.D. φ12.7
I.D. φ15.9
380
150
I.D. φ15.9I.D. φ19.1
8 0
1 2 0
602 × 60 = 120
INSULATION
I.D. φ15.9
O.D. φ12.7
80
× 2
LIQUID SIDE JOINTGAS SIDE JOINT
O.D. φ19.1
I.D. φ22.2
100
3-I.D. φ6.4
I.D. φ9.5
9 3
60
I.D. φ6.4
130
40
410
I.D. φ9.5
6 0
7 7
I.D. φ9.5
2 × 60 = 120
O.D. φ6.4
× 2
INSULATION
D3K03629C
GAS SIDE JOINT LIQUID SIDE JOINT
I.D. φ15.9
I . D .
φ 2 2 . 2
1 7 1
670
I.D. φ9.5
145
205
I.D. φ15.9
6-I.D. φ6.4
5 × 60 = 300
2-I.D. φ6.4
615
150
2-I.D. φ12.7
5-I.D. φ12.7
2 × 60 = 120
6-I.D. φ9.5
I.D. φ12.7I.D. φ9.5
I.D. φ19.1 1 2 1
8 1
120
6 0
I.D. φ12.7
40
120
120
9 3
I.D. φ19.1
2-I. D. φ15.9
7 7
100
I.D. φ25.4
O.D. φ22.2
O.D. φ6.4
60
265
510
80
I.D. φ15.9
O.D. φ12.7
× 2
INSULATION
INSULATION
× 2
D3K03630C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 284/308
REFNET Joint and Header EDMT34-635A
278 Installation of Outdoor Units
3P113151C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 285/308
EDMT34-635A REFNET Joint and Header
Installation of Outdoor Units 279
13
3P113151C
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 286/308
REFNET Joint and Header EDMT34-635A
280 Installation of Outdoor Units
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 287/308
EDMT34-635A
Option of Control 281
14
Part 5
Option of Control
1. Option List of Controllers.....................................................................282
2. DAIKIN Building Air conditioning Control System (D-BACS) ..............2842.1 Centralised Control Systems................................................................284
2.2 intelligent Touch Manager....................................................................285
2.3 Integrated Building Monitoring System.................................................286
3. Wired Remote Controller.....................................................................288
4. Wireless Remote Controller / Receiver ...............................................290
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 288/308
Option List of Controllers EDMT34-635A
282 Option of Control
1. Option List of Controllers
Operation Control System Optional Accessories
Notes:
1. Installation box (No.9) is necessary for each adaptor marked .
2. Up to 2 adaptors can be fixed for each installation box.
3. Only one installation box can be installed for each indoor unit.
4. Up to 2 installation boxes can be installed for each indoor unit.
5. Installation box (No. 9) is necessary for each adaptor.
System configuration
Notes:
1. Installation box for adaptor must be obtained locally.
2. For FXUQ-MAV1, an interface adaptor (DTA102A52) for the SkyAir series is necessary.
3. For residential use only. Cannot be used with other centralized control equipment.
No.Type
FXFQ-P FXZQ-M FXCQ-M FXKQ-MAFXDQ-PBFXDQ-NB
FXMQ-P FXHQ-MA FXAQ-PFXLQ-MAFXNQ-MA
FXUQ-MAItem
1 Remotecontroller
WirelessC/O BRC7F635F BRC7E531W BRC7C67 BRC4C63 BRC4C66 BRC4C66 BRC7EA66 BRC7EA619 BRC4C64 BRC7CA529W
H/P BRC7F634F BRC7E530W BRC7C62 BRC4C61 BRC4C65 BRC4C65 BRC7EA63W BRC7EA618 BRC4C62 BRC7CA528W
Wired BRC1C62
2Navigation remotecontroller (Wired remotecontroller)
BRC1E61
3Wired remote controllerwith weekly schedule timer
BRC1D61
4Simplified remotecontroller (Exposed type)
— BRC2C51 — BRC2C51 —
5Remote controller forhotel use (Concealedtype)
— BRC3A61 — BRC3A61 —
6 Adaptor for wiring KRP1C63
KRP1BA57 KRP1B61 KRP1B61 KRP1B56 KRP1C64 KRP1BA54 — KRP1B61 —
7-1Wiring adaptor forelectrical appendices (1)
KRP2A62 KRP2A61 KRP2A61 KRP2A53 KRP2A61 KRP2A62 KRP2A61 KRP2A61 —
7-2Wiring adaptor forelectrical appendices (2)
KRP4AA53 KRP4AA51 KRP4AA51 KRP4A54
KRP4AA51 KRP4AA52
KRP4AA51 KRP4AA51 KRP4AA53
8 Remote sensor KRCS01-4B KRCS01-1B KRCS01-4B KRCS01-1B
9Installation box foradaptor PC board
Note 2, 3KRP1H98
Note 4, 5KRP1BA101
Note 2, 3KRP1B96
—Note 4, 5
KRP1BA101Note 2, 3KRP4A96
Note 3KRP1CA93
Note 2, 3KRP4AA93
— KRP1BA97
10External control adaptorfor outdoor unit
DTA104A62 DTA104A61 DTA104A61 DTA104A53 DTA104A61 DTA104A62 DTA104A61 DTA104A61 —
11 Adaptor for multi tenant DTA114A61 — DTA114A61 — DTA114A61 —
No. Item Model No. Function
1 Residential central remote controllerNote 3
DCS303A51
Up to 16 groups of indoor units (128 units) can be easilycontrolled using the large LCD panel, ON/OFF, temperaturesettings and scheduling can be controlled individually for indoorunits.
2 Central remote controllerNote 2
DCS302CA61 Up to 64 groups of indoor units (128 units) can be connected,
and ON/OFF, temperature setting and monitoring can beaccomplished individually or simultaneously. Connectable upto 2 controllers in one system.2-1 Electrical box with earth terminal (3 blocks) KJB311AA
3 Unified ON/OFF controllerNote 2
DCS301BA61 Up to 16 groups of indoor units (128 units) can be turned, ON/ OFF individually or simultaneously, and operation andmalfunction can be displayed. Can be used in combination withup to 8 controllers.
3-1 Electrical box with earth terminal (2 blocks) KJB212AA
3-2 Noise filter (for electromagnetic interface use only) KEK26-1A
4 Schedule timerNote 2
DST301BA61
Programmed time weekly schedule can be controlled by unifiedcontrol for up to 64 groups of indoor units (128 units). Can turnunits ON/OFF twice per day.
5Interface adaptor forSkyAir series
For SkyAir, FD(Y)M-FA, FDY-KAFDYB-KA, FVY(P)J-A, FXUQ-MA
DTA102A52 Adaptors required to connect products other than those of the
VRV System to the high-speed DIII-NET communicationsystem adopted for the VRV System.To use any of the above optional controllers, an appropriate
adaptor must be installed on the product unit to be controlled.
For SkyAir FFQ-B, FHQ-BV,FAQ100BV, FBQ-B
DTA112BA51
6 Central control adaptor kit For UAT(Y)-K(A),FD-K DTA107A55
7 Wiring adaptor for other air-conditioner DTA103A51
8 DIII-NET Expander Adaptor DTA109A51
Up to 1024 units can be centrally controlled in 64 differentgroups.
Wiring restrictions (max. length: 1,000m, total wiring length:2,000m, max. number of branches: 16) apply to each adaptor.
8-1 Mounting plate KRP4A92 Fixing plate for DTA109A51
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 289/308
EDMT34-635A Option List of Controllers
Option of Control 283
14
Building Management System
Notes:
1. BACnet ® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers
(ASHRAE).
2. LONWORKS ® is a trademark of Echelon Corporation registered in the United States and other countries.
3. Installation box for adaptor must be obtained locally.
No. Item Model No. Function
1 intelligentTouch
Controller
Basic Hardwareintelligent TouchController
DCS601C51 Air-conditioning management system that can be controlled
by a compact all-in-one unit.
1-1 Option Hardware DIII-NET plus adaptor DCS601A52 Additional 64 groups (10 outdoor units) is possible.
1-2 Electrical box with earth terminal (4 blocks) KJB411A Wall embedded switch box.
2
intelligentTouch
Manager
Basic Hardware intelligent TouchManager DCM601A51
Air-conditioning management system that can be controlledby touch screen.
2-1
Option
HardwareiTM plus adaptor DCM601A52
Additional 64 groups (10 outdoor units) is possible.Max. 7 iTM plus adaptors can be connected to intelligentTouch Manager.
2-2 iTM integrator DCM601A53 Max. 5 intelligent Touch Managers can be integrated.
2-3Software
iTM power proportionaldistribution
DCM002A51 Power consumption of indoor units are calculated based on
operation status of the indoor unit and outdoor unit powerconsumption measured by kWh metre.
2-4 iTM energy navigator DCM008A51 Building energy consumption is visualized.
Wasted air-conditionning energy can be found out.
2-5 Di unit DEC101A51 8 pairs based on a pair of On/Off input and abnormality input.
2-6 Dio unit DEC102A51 4 pairs based on a pair of On/Off input and abnormality input.
3
Communicationline
1 Interface for use in BACnet ® DMS502B51 Interface unit to allow communications between VRV and
BMS. Operation and monitoring of air-conditioning systemsthrough BACnet ® communication.
3-1 Optional DIII board DAM411B51 Expansion kit, installed on DMS502B51, to provide 2 moreDIII-NET communication ports. Not usable independently.
3-2 Optional Di board DAM412B51 Expansion kit, installed on DMS502B51, to provide 16 more
wattmeter pulse input points. Not usable independently.
4 2 Interface for use in LONWORKS ® DMS504B51
Interface unit to allow communications between VRV andBMS. Operation and monitoring of air-conditioning systemsthrough LONWORKS
® communication.
5Contact/ analogsignal
Unification adaptor forcomputerised control DCS302A52
Interface between the central monitoring board and centralcontrol units.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 290/308
DAIKIN Building Air conditioning Control System (D-BACS) EDMT34-635A
284 Option of Control
2. DAIKIN Building Air conditioning Control System
(D-BACS)
2.1 Centralised Control Systems
Up to 64 groups of indoor units (128 units) can be centrally controlled.
Optional controllers for centralised control can be combined freely, and
system can be designed in accordance with building scale and purpose.
System integration with various air-conditioning peripheral
equipment, such as a Heat Reclaim Ventilator, is easy.
Wiring can be run up to a total length of 2 km, and adapts easily to
large-scale system expansion.
Central controladaptor kit(DTA107A55)
Central remotecontroller(DCS302CA61)
Up to 2 unitsconnectable
Unified on/offcontroller
(DCS301BA61)
Connection ofup to 8 unitspossible
Schedule timer (DST301BA61)
1 unit connection possible ;8 weekly schedule control patterns possible
Forcedshut-downinput
Independentand centralisedcontrol of aHeat ReclaimVentilator is
possible.
Unification adaptor for computerisedcontrol (DCS302A52)
Interlink Building Management System(host computer monitor panel) also possible
6 cores 7 cores max.
Address setting of central control can beperformed from the remote controller.
Group control of up to 16 units is possible(group control via automatic address setting)
System without remote control is also available.
Interface adaptor for SkyAirseries(DTA102A52 or DTA112BA51)
Connectable number of
centralised control
equipment
Central remotecontroller
2 units
Unified on /offcontroller
8 units
Schedule timer 1 unit
Wiring adaptorfor other air-conditioners(DTA103A51)
Outdoor-air
processing
unit can be
connected.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 291/308
EDMT34-635A DAIKIN Building Air conditioning Control System (D-BACS)
Option of Control 285
14
2.2 intelligent Touch Manager
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 292/308
DAIKIN Building Air conditioning Control System (D-BACS) EDMT34-635A
286 Option of Control
2.3 Integrated Building Monitoring System
(DCM601A51)
BMS
(Obtain locally)
Wiring adaptor
for electrical appendices
(KRP2A61/62/53)
Central Remote
Controller
(DCS302CA61)
(DCS601C51)
Schedule Timer
(DST301BA61)
Unified ON/OFF
Controller
(DCS301BA61)
Unification adaptor
for computerised control
(DCS302A52)
Air Conditioning Network Service System(There are restrictions in applicable areas and
release times, therefore please consult usseparately for details.)
(Optional Maintenance Service)
Control /Connection Interface
Building Control System
Interface for use in BACnet ®
(DMS502B51)
Interface for use in LONWORKS ®
(DMS504B51)
ACC Centre
Controllers for Centralised Control
The high speed transmission of DIII-NET enables more advanced control of the VRV system, providing youwith enhanced comfort.
Via internet
Via internet
New
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 293/308
EDMT34-635A DAIKIN Building Air conditioning Control System (D-BACS)
Option of Control 287
14
Interface Adaptor for SkyAir Series
(DTA102A52)
Central Control Adaptor Kit
(DTA107A55)
Interface Adaptor for DIII-NET use
(KRP928BB2S)
DIII-NET Line
BACnet ® /Ethernet or LONWORKS ®
Network Communication Line
Contact Signal Line
Caution:
Limitation may apply to some models and functions. Please contact your local sales office for details.
Consultation is necessary before employing this control system. Please contact your local sales office before
making a purchase.
Di unit (DEC101A51)Dio unit (DEC102A51)
Building services equipment
• Electrical equipment• Supply water and drainage equipment• Automatic fire alarm
• Parking equipment• Lift• Ventilation equipment• Lighting• Crime and fire prevention equipment
D -NET(High Speed Multiple
Transmission)
DIII-NET, Daikin’s unique high speed multipletransmission system,links air conditionersand various other
building equipment—inaccordance withapplications, scale andconditions—andtransmits vast amountsof information betweenthem.
Note: BACnet ® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning
Engineers (ASHRAE). LONWORKS ® is a trademark of Echelon Corporation registered in the United
States and other countries.
The DIII-NET system provides for:
• Close control and monitoring by integrating a wide variety of air-conditioners in the
entire building.
• Saving the in-building cabling using non-polar, two-wire cables. Easier wiring work with
tremendously fewer wiring errors.
• Additional setups readily up and running. An extendable cabling up to 2 km in total.
• Different control equipment flexibly joined in the system for hierarchical riskdiversification.
• Daikin's total heat exchangers and other devices under integral control.
VRV
Heat Reclaim Ventilator
SkyAir
PackagedAir-conditioner
Residential Air-conditioner
* No adaptor is required for the
FHYCP-DVE and FAY(P)71L.
VRV
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 294/308
Wired Remote Controller EDMT34-635A
288 Option of Control
3. Wired Remote Controller
BRC1C62
BRC1E61
3D028952
Unit (mm)
3D064037
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 295/308
EDMT34-635A Wired Remote Controller
Option of Control 289
14
BRC1D61
C EXPOSED BODY, EMBEDDED CORDB EXPOSED BODY, EMBEDDED CORDA EXPOSED BODY, EXPOSED CORD
120
23
46
REMOTE CONTROLLER
BETWEEN REMOTECONTROLLER ANDCONTROL BOX
( )
REMOTE CONTROLLER
18
REMOTE CONTROLLER
CORD OUTLET HOLE
8 4
1 2 0
28
17
3 8
4 2
CONTROL BOX
• REMOTE CONTROLLER DIMENSIONS
CONDUIT
0 ~ 5
NOTE) 1. REMOTE CONTROLLER CORD AND STAPLE ARE NOT ATTACHED.
THEY ARE FIELD SUPPLIED PARTS.
1 1 7
THROUGH HOLE17
17
• SPECIFICATIONS OF CORD
17
• INSTALLATION METHOD
STAPLE
(φ12 ~ φ16)
VINYL CORD WITH SHEATH OR CABLE
(INSULATED THICKNESS: 1mm OR MORE)
FOR OTHER COUNTRIESFOR AUSTRALIA
SHIELD WIRE
(INSULATED THICKNESS: 1mm OR MORE)TYPE
SIZE
TOTALLENGTH
0.75 ~ 1.25mm2
500m
3D048117
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 296/308
Wireless Remote Controller / Receiver EDMT34-635A
290 Option of Control
4. Wireless Remote Controller / Receiver
BRC7F634F (for FXFQ Heat Pump) BRC7F635F (for FXFQ Cooling Only)
BRC7E530W (for FXZQ Heat Pump) BRC7E531W (for FXZQ Cooling Only)
3D052918C
Unit (mm)
• RECEIVER INSTALLATION PROCEDURE
REFRIGERANT PIPING SIDEDRAIN PIPING SIDE
• RECEIVER DETAIL
• REMOTE CONTROLLER DIMENSIONS
17.562
RECEIVER
TRANSMITTING PART
1 5 7
DECORATION PANEL
• REMOTE CONTROLLER HOLDERINSTALLATION PROCEDURE<INSTALLATION TO WALL SURFACE>
REMOTE CONTROLLER
HOLDER
LIQUID CRYSTAL
REMOTE CONTROLLER
(WIRELESS)
(BYFQ60BW1)(BYFQ60B7W1)(BYFQ60B8W1)
3D038937A
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 297/308
EDMT34-635A Wireless Remote Controller / Receiver
Option of Control 291
14
BRC7C62 (for FXCQ Heat Pump) BRC7C67 (for FXCQ Cooling Only)
BRC4C61 (for FXKQ Heat Pump) BRC4C63 (for FXKQ Cooling Only)
BRC4C62 (for FXLQ, FXNQ Heat Pump) BRC4C64 (for FXLQ, FXNQ Cooling Only)BRC4C65 (for FXDQ-PB, FXDQ-NB, FXMQ-P Heat Pump) BRC4C66 (for FXDQ-PB, FXDQ-NB, FXMQ-P Cooling Only)
DECORATION PANELREMOTE CONTROLLER
HOLDER
BYBC32G-W1BYBC50G-W1BYBC63G-W1BYBC125G-W1
BYBC32GJW1BYBC50GJW1BYBC63GJW1BYBC125GJW1
DECORATION PANEL RECEIVER
• REMOTE CONTROLLER HOLDER
INSTALLATION PROCEDURE
<INSTALLATION TO WALL SURFACE>
• RECEIVER INSTALLATION PROCEDURE
• RECEIVER DETAIL
WIRELESS REMOTECONTROLLER KIT
LIQUID CRYSTAL
REMOTE CONTROLLER
(WIRELESS)
TRANSMITTING PART
BRC7C62BRC7C67
• REMOTE CONTROLLER DIMENSIONS
• WIRELESS REMOTE CONTROLLER KIT FOR EACH
DECORATION PANEL
62 17.5
1 5 7
3D007588A
Unit (mm)
P2
• REMOTE CONTROLLER DIMENSIONS
(Ceiling Opening)
2-5 × 9 Slot
( C e i l i n g O p e n i n g )
TRANSMITTING PART
P1
• REMOTE CONTROLLER HOLDER
INSTALLATION PROCEDURE
<INSTALLATION TO WALL SURFACE>
• RECEIVER DETAIL
7 2
35
1 2 0
1870
1 5 7
17.5
Do not install more than 3 receivers in the vicinity of
one another.With 4 or more units, there is always the possibility
of malfunction.
m o r e t h a n 9 0
• Service space for ceiling installation
NOTE
0.5
LIQUID CRYSTAL
REMOTE CONTROLLER
(WIRELESS)
REMOTE CONTROLLER
HOLDER
1 0 6
62
Switch box
(Field Supplied
parts)
8 3 . 5
49
( S e r v i c e s p a c e )
3D007898B
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 298/308
Wireless Remote Controller / Receiver EDMT34-635A
292 Option of Control
BRC7EA63W (for FXHQ Heat Pump) BRC7EA66 (for FXHQ Cooling Only)
BRC7EA618 (for FXAQ Heat Pump) BRC7EA619 (for FXAQ Cooling Only)
• REMOTE CONTROLLER HOLDER
INSTALLATION PROCEDURE
<INSTALLATION TO WALL SURFACE>
LIQUID CRYSTAL
REMOTE CONTROLLER
(WIRELESS)
REMOTE CONTROLLER
HOLDER
• REMOTE CONTROLLER DIMENSIONS
• RECEIVER DETAIL
TRANSMITTING PART
• RECEIVER INSTALLATION PROCEDURE
1 5 7
17.562
RECEIVER
3D028963B
Unit (mm)
• REMOTE CONTROLLER DIMENSIONS
BRC7E618 BRC7EA618 (For H/P)
INDOOR UNIT
FXAQ-MA
FXA-LVE(C)
WIRELESS REMOTE CONTROLLER KIT
• WIRELESS REMOTE CONTROLLER KIT
• RECEIVER INSTALLATION PROCEDURE
• RECEIVER DETAIL
• REMOTE CONTROLLER HOLDERINSTALLATION PROCEDURE
<INSTALLATION TO WALL SURFACE>
BRC7E619 BRC7EA619 (For C/O)
1 5 7
TRANSMITTING PART
62 17.5
REMOTE
CONTROLLER HOLDER
RECEIVER
LIQUID CRYSTAL
REMOTE CONTROLLER
(WIRELESS)
C: 3D034905B
Unit (mm)
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 299/308
EDMT34-635A Wireless Remote Controller / Receiver
Option of Control 293
14
BRC7CA528W (for FXUQ Heat Pump) BRC7CA529W (for FXUQ Cooling Only)
C: 3D014035A
Unit (mm)
FUY71 / 100 / 125FJV1FXUQ71 / 100 / 125MAV1
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 300/308
Wireless Remote Controller / Receiver EDMT34-635A
294 Option of Control
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 301/308
EDMT34-635A
Guide Specifications 295
15
Part 6
Guide Specifications
1. Guide Specifications ...........................................................................2961.1 Guide Specifications.............................................................................296
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 302/308
Guide Specifications EDMT34-635A
296 Guide Specifications
1. Guide Specifications
1.1 Guide Specifications
General
Unit shall be air cooled, split type multi-system air conditioner consisting of one outdoor unit and plural indoor units,
each having capability to cool or heat independently for the requirements of the rooms.
Up to 14 different type and 0.8-6HP capacity indoor units can be connected to one refrigerant circuit and controlledindividually.
Compressor shall be equipped with inverter controller, and capable of changing the rotating speed to follow
variations in cooling and heating load.
Outdoor unit shall be suitable for mix-match connection of following models.
Ceiling Mounted Cassette (Round Flow) Type
Ceiling Mounted Cassette (Compact Multi Flow) Type
Ceiling Mounted Cassette (Double Flow) Type
Ceiling Mounted Cassette Corner Type
Slim Ceiling Mounted Duct Type
Ceiling Mounted Duct Type
Ceiling Suspended Type
Wall Mounted Type
Floor Standing Type
Concealed Floor Standing Type
Ceiling Suspended Cassette (Connection Unit Series) Type
Refrigerant: R-410A
1.1.1 P Series Outdoor UnitThe refrigerant piping shall be extended up to 150m with 50m (1) level difference without any oil traps.
Air conditioner shall operate continuously at the ambient temperature of -5°C in cooling -15°C in heating
(Operation Range: -20°C).
Both indoor unit outdoor unit are assembled, tested, and charged with refrigerant at the factory.
1: The value is based on the case where the outdoor unit is located above indoor unit. Where the outdoor unit is
located under the indoor unit, the level difference is a maximum of 40m.
Outdoor Unit
The outdoor unit shall be a factory assembled unit housed in a sturdy weatherproof casing constructed form rust-
proofed mild steel panels coated with a baked enamel finish.
The connectable range of indoor units shall be from 0.8 to 6HP with all outdoor units.
The noise level shall not be more than 50 dB(A) (in case of 4HP cooling) at normal operation measured
horizontally 1m away and 1.5m above ground.
The outdoor unit shall be modular in design and should be allowed for side by side installation.
Compressor
The compressor shall be of highly efficient hermetic scroll type and equipped with inverter control capable ofchanging the speed in accordance to the cooling or heating load requirement.
The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual
control.
Heat Exchanger
The heat exchanger shall be constructed with copper tubes mechanically bonded to aluminium fins to form a cross fin
coil.
The aluminium fins shall be covered by anti-corrosion resin film.
Refrigerant Circuit
The refrigerant circuit shall include liquid and gas shut off valves and a solenoid valves.
All necessary safety devices shall be provided to ensure the safety operation of the system.
8/20/2019 EDMT34-635A_VRV3S.pdf
http://slidepdf.com/reader/full/edmt34-635avrv3spdf 303/308
EDMT34-635A Guide Specifications
Guide Specifications 297
15
Safety Devices
The following safety devices shall be part of the outdoor unit.
High Pressure Switch, Fan Driver Overload Protector, Inverter Overload Protector, Fusible Plugs, Fuse.
Oil Recovery System
Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.
1.1.2 Indoor UnitsEach indoor unit shall be of the Ceiling Mounted Cassette (Round Flow) Type, Ceiling Mounted Cassette (Compact
Multi Flow) Type, or Ceiling Mounted Cassette (Double Flow) Type, or Ceiling Mounted Cassette Corner Type, or
Slim Ceiling Mounted Duct Type, or Ceiling Mounted Duct Type, or Ceiling Suspended Type, or Wall Mounted Type,
or Floor Standing Type, or Concealed Floor Standing Type, or Ceiling Suspended Cassette Type (Connection Unit
Series). It shall have electronic control valve which control refrigerant flow rate in respond to load variations of the
room. The fan shall be of the dual suction multi blade type and statically and dynamically balanced to ensure low
noise and vibration free operation.
The address of the indoor unit shall be set automatically in case of individual and group control.
In case of centralized control, it shall be set by liquid crystal remote controller.
Control
Computerized PID control shall be used to maintain a correct room temperature.Unit shall be equipped with a self-diagnosis for easy and quick maintenance and service.
The LCD (Liquid Crystal Display) remote controller shall memorize the latest malfunction code for easy maintenance.
It shall be able to control up to 16 indoor units and change fan speed and angle of swing flap individually in the
group.
Central Remote Controller (Option)
Central remote controller shall be supplied as optional accessory.
It shall be able to control up to 64 groups of indoor units (128 units) with the following functions.
a) Temperature setting for each zone, or group, or indoor unit.
b) ON/OFF as a zone or individual unit.
c) Indication of operating condition.
d) Select one of 10 operation modes for each zone. The controller shall have wide screen liquid crystal display and can be wired by a non-polar 2-wire transmission
cable to a distance of 1 km away from the indoor unit.
Unified ON/OFF Controller (Option)
Unified ON/OFF controller shall be supplied as optional accessory.
It shall be able to control up to 16 groups (each group consists of Max. 16 indoor units) or 128 No.s of indoor units
with the following functions.
a) ON/OFF as a zone or individual unit.
b) Indication of operation condition of each group.
c) Select one of 4 operation modes.
It shall be wired by a non-polar 2-wire transmission cable to a distance of 1 km away from indoor unit.
Schedule Timer (Option)
Schedule timer shall be supplied as optional accessory.
It shall be able to set operation schedule of up to 128 No.s of indoor units.
The operation schedule shall include twice ON/OFF a day and holiday.
It shall be able to set 8 pattern of schedule combined with central remote controller.
Residential Central Remote Controller (Option)
Up to 16 groups of indoor units (128 units) can be easily controlled using the large panel. ON/OFF, temperature
settings and scheduling can be controlled individually for indoor units.
intelligent Touch Controller (Option)
Air-conditioning management system that can be controlled by a compact all-in-one unit
intelligent Touch Manager (Option)
Air-conditioning management system that can be controlled by a compact all-in-one unit.