EDGE PROCESSING Mobile Edge Processing WOOD PROCESSING TECHNOLOGY
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
EdgE ProcEssingMobile Edge Processing
WOOD PROCESSING TECHNOLOGY
“When you make it round, you stop making money” – an old rule that no longer applies!
All prices are valid from April 1, 2010. With the publication of these prices, all previously published prices become invalid. Our general business terms and conditions apply. This
catalogue is protected by copyright. Any reprint of this material, even of an extract, shall only be permissible with the express approval of the publisher. Technical data subject
to change. No liability is assumed for any printing errors in this catalogue. The legal VAT rate is applicable. Updated 08/2010
www.wegoma-holz.de 3
WEgoMA® portable hot melt edgebanding machines allow edging to be glued to any work piece quickly and easily: suitable for large, round, cambered, small or straight work pieces.
Your customers have unusual and demanding requirements. You create accents with round and cambered shapes, offering your customers more than your competitors do. Expand your production options with WEGOMA® portable edgebanding machines, your own creativity and skilful craftsmanship.
WEGOMA® portable edgebanding machines solve the “form problems” of even small and midsize builders and trade contractors without demanding high investments or extensive space requirements. High-quality standard square panels can also be fabricated quickly and cost-effectively.
WEGOMA® has been known for innovative ideas and premium wood processing technology since 1970. In addition to stationary edge processing, the company also specialised in mobile edge processing more than 20 years ago with the AG98 and KF30 equipment series.
The market introduction of our first portable edgebanding machines in 2006 – the PM2000 Portamaster series by WEGOMA®, featuring an adhesive re-servoir for hot melt adhesive granulate – developed into a booming business for mobile edge gluing. So it is little wonder that WEGOMA® is now one of the largest manufacturers of portable edgebanding machines. We are happy to have thousands of satisfied users, and are also producing these machines for other manufacturers of wood processing machines who distribute them around the world under their own brand.
WEGOMA® is among the leading manufacturers, not only for edgebanding but also for other aspects of mobile edge processing.
Vacuum clamping systems for your work pieces, end trimmers and edge trimming machines by WEGOMA® are all top-quality machines built by professi-onals for professionals.
ClampingElectrical and compressed air vacuum clamping systems
Page 4-5
Page 6-7
Page 8-9
Page 10-11
EdgebandingPortable hot melt edgebanding machines and accessories
End trimmingEnd trimmers for straight, diagonaland round parts
Edge trimmingElectric and compressed air edge trimming machines
Mobile Edge Processing
EdgE ProcEssing – Mobile Edge Processing4
Compressed air vacuum clamping systemsVersatile clamping systems for horizontal and vertical work piece clamping. Dual-sided suction. The ideal helper for trimming, grinding, planing, sawing, filling and coating. Also suitable for use in explosion-prone areas.
EquiPMEnt:
• Dual-sided suction – top and bottom suction plates for use without clamps, simply set on the work bench, switch on, load work piece.
• Horizontal and vertical clamping - versatile, secure and straightforward.
• Clamping that protects the material - no surface damage thanks to the rubber lip to preserve sensitive surfaces.
• Clamping very small work pieces - with sectioned suction plates.
• Clamping large and oversize work pieces - tremendous suction force permits clamping work pieces up to 2 m² on just one clamping unit (based module). An add-on module (option) can be mounted for even larger work pieces.
• Clamp mounting points - for rough or vapour-permeable work surfaces, the clamping fixtures can be secured with clamps.
• Powerful vacuum valve - generated vacuum of 700 millibar, vertical holding force 70 kg, horizontal holding force 150 kg.
• Low compressed air demand - only 38 l/min at 4-6 bar operating pressure.
tEchnicAl dAtA:
Holding force: Work piece vertical 70 kg Holding force: Work piece horizontal 150 kg Generated vacuum 700 mbar Vacuum surface 340 x 125 mm Operating pressure 4 - 6 bar Compressed air demand at 4 bar 38 l/min Dimensions (L x W x H) 390 x 145 x 200 mm Weight DVS-G/DVS-A 5.5 kg / 4.9 kg
• Straightforward and fast operation - with practi-cal slide valve or the optional foot switch.
• Expandable system - the DVS-G base module can be extended with the DVS-A expansion module at any time. Or you can choose the DVS-S set, consisting of the base module and expansion module in the WEGOMA system box.
optional:• Foot switch - very easy to operate, always 2 free
hands to load the work piece.• Expansion module for subsequent extension of
the system.
DVS-S: set consisting of the base module (DVS-G) and expansi-on module in the system box
Compressed air vacuum clamping system - dual-sided suction
order no. description 96000205 DVS-G base module with pneumatic pump 96000206 Expansion module for DVS-G / EVS-G 96000210 DVS-S set: consisting of DVS-G and expansion module in the system box 95000250 Foot switch complete for DVS-G
ordEr nuMbErs:
dEtAils:
Secure, comfortable operation with the foot switch.
Vertical clamping of large work pieces.On vapour-permeable surfaces, the vacuum clamping system can be secured with clamps.
Straightforward, secure and quick clamping of long or short work pieces.
VACUUM CLAMPING SYSTEMS
www.wegoma-holz.de 5
ordEr nuMbErs:
dEtAils:
order no. description 96000500 EVS-G base module with electric pump 96000206 Expansion module for DVS-G / EVS-G 96000502 EVS-S set: consisting of EVS-G and expansion module in the system box 95000250 Foot switch complete for EVS-G
Electric vacuum clamping systemsVersatile clamping systems for horizontal and vertical work piece clamping. Dual-sided suction. The ideal helper for trimming, grinding, planing, sawing, filling and coating. Also suitable for use on construction sites.
EquiPMEnt:
• Dual-sided suction – top and bottom suction plates for use without clamps, simply set on the work bench, switch on, load work piece.
• Horizontal and vertical clamping - versatile, secure and straightforward.
• Clamping that protects the material - no surface damage thanks to the rubber lip to preserve sensitive surfaces.
• Clamping very small work pieces - with sectioned suction plates.
• Clamping large and oversize work pieces - tremendous suction force permits clamping work pieces up to 2 m² on just one clamping unit (based module). An add-on module (option) can be mounted for even larger work pieces.
• Clamp mounting points - for rough or vapour-permeable work surfaces, the clamping fixtures can be secured with clamps.
• Powerful electric vacuum pump - 750 millibar generated vacuum, vertical holding force 70 kg, horizontal holding force 150 kg.
• Fast and straightforward operation - also with optional foot switch.
tEchnicAl dAtA:
Voltage 230V, 50/60 Hz Connected load 120 W Generated vacuum 750 mbar Holding force: Work piece horizontal 150 kg Vacuum surface 340 x 125 mm Dimensions (L x W x H) 90 x 145 x 200 mm Weight EVS-G/EVS-A 5.8 kg / 4.9 kg
• Expandable system - the EVS-G base module can be extended with the expansion module at any time. Or you can choose the EVS-S set, consis-ting of the base module and expansion module in the WEGOMA system box.
optional:• Foot switch - very easy to operate, always 2 free
hands to load the work piece.• Expansion module for subsequent extension of
the system.
Electric vacuum clamping system - dual-sided suction
VACUUM CLAMPING SYSTEMS
EVS-S: set consisting of base module (EVS-G) and expansion mo-dule in the system box.
Vertical clamping of large work pieces.Secure, comfortable operation with the foot switch.
Secure clamping of long work pieces with the expansion module.
Countless clamping possibilities
EdgE ProcEssing – Mobile Edge Processing6
PM2000i, PM2000T and PM2000TS edgebanding machinesWith digital temperature control and continuously variable speed (PM2000TS). The Portamaster series PM2000i - PM2000T – PM2000TS mobile edgebanding machines with hot melt adhesive reservoir for formed parts and straight work pieces. Ideal for rapid deployment in the workshop, at installation sites, trade fairs etc.
EquiPMEnt:
• Digital, continuously variable temperature control from 120° to 200°C (T, TS)
• Continuously variable speed from 0 to 4 m/min (TS)
• For cambered and straight work pieces• Edges can be pre-glued for corner joints• Also usable as stationary equipment
• Straightforward and fast setup• 1-man operation• Hot melt adhesive reservoir• Even shorter warm-up time• Very good heat insulation
scope of delivery:• PM2000i in the system box• PM2000T with continuously variable tempera-
ture control in the system box• PM2000TS with continuously variable tempera-
ture control and speed in the system box
order no. description 29101754 PM2000i 29101760 PM2000T 29101761 PM2000TS
ordEr nuMbErs:
PorTAbLE hoT MELT EdGEbANdING MAChINES
tEchnicAl dAtA: PM2000i PM2000t PM2000ts Voltage 230V,50/60Hz - (120V,60Hz) 230V,50/60Hz - (120V,60Hz) 230V,50/60Hz - (120V,60Hz)Load 765 W 765W 765 WMax. edge height 45 mm 45 mm 45 mmEdging thickness 0.4 – 3 mm 0.4 – 3 mm 0.4 – 3 mmInfeed speed 3.6 m/min 3.6 m/min 0 – 4 m/minOperating temperature 160° 120° - 200° 120° - 200°Adhesive reservoir capacity 150 cm³ 150 cm³ 150 cm³Warm-up time (depending on granulate) ~ 12 min ~ 6 min ~ 6 minDimensions (LxWxH) 300 x 220 x 260 mm 300 x 240 x 260 mm 300 x 240 x 260 mmWeight 7.9 kg 8.0 kg 8.4 kg
Edge gluing devicePM2000i
Delivery in the system box
Edge gluing devicePM2000T
Edge gluing devicePM2000TS
www.wegoma-holz.de 7
order no. description 95000050 SE2001 stationary table with ball casters 96000665 Retrofitting kit with support plate and trimmer for SE2001 96000666 SE2002 stationary table with ball casters, support plate (D=600mm) and trimmer 95000082 Stop for processing straight work pieces 95000000 WEGOCLEAN 92000528 SKG170 hot melt adhesive granulate, 3kg bucket
ordEr nuMbErs:
Accessories
APPlicAtion:
Gluing round work pieces with the SE2002
Gluing cambered and straight work pieces Gluing long work pieces with the SE2002
Gluing large work pieces
SE2001 stationary table
Stop for straight work pieces
retrofitting kit for SE2001 with support plate and trimmer
WEGoCLEAN
SE2002 stationary table
dEscriPtion:
SE2001 for the stationary use of mobile edge gluing devices.
dEscriPtion:
Gluing narrow, straight and long work pieces is easy with the (plug-on) stops.
dEscriPtion:
Retrofitting kit for the SE2001 stationary table.
dEscriPtion:
WEGOCLEAN cleaning spray forthe removal of adhesive residue and cleaningall edge gluing devices.
dEscriPtion:
SE2002 stationary table with support plate and trimmer.
EdgE ProcEssing – Mobile Edge Processing8
KG20r end trimmer KG30 end trimmerEnd trimmer for PVC, polyester, melamine and other edging End trimmer for PVC, polyester, melamine and other edging
order no. description 29101524 KG20R
ordEr nuMbErs:
order no. description 29101523 KG30
ordEr nuMbErs:
dEtAils: dEtAils:
ENd TrIMMErS ENd TrIMMErS
End trimmer KG20R
End trimmer KG30
The end of the edging should protrude slightly after gluing.
Apply the end trimmer to the edge.
Align the end trimmer and trim the protruding edging.
Apply the end trimmer to the edge. Push the protruding edging through the end trimmer.
Trim by striking the end trimmer.
Glue with hot air gun. For a perfect finish.
dEscriPtion:
The KG20R end trimmer is suitable for trimming edging on round work pieces.
dEscriPtion:
The end trimmer is designed for trimming edging on square work pieces.
tEchnicAl dAtA:
Max. edging thickness 2 mm Max. Edge width 45 mm
tEchnicAl dAtA:
Max. edging thickness: Max. edge height: 0.8 mm - 1.5 mm 45 mm 1.5 mm - 3.0 mm 23 mm
tEchnicAl dAtA:
Max. edging thickness: Max. edge height: 0.3 mm - 2.0 mm 45 mm 3.0 mm 23 mm
tEchnicAl dAtA:
Max. edging thickness 3 mm Max. edge height 50 mm Weight 1.9 kg
www.wegoma-holz.de 9
Straightforward, precise trimming
KG30G end trimmer KG30/60 end trimmerEnd trimmer for PVC, polyester, melamine and other edging End trimmer for PVC, polyester, melamine, ABS and other edging
dEscriPtion:
The KG30G end trimmer is designed for 90° cuts. Edge heights up to 45 mm can be processed. The max. edging thickness is 3 mm.
dEscriPtion:
The end trimmer is designed for an edge height up to 50 mm and and edging thickness up to 3 mm. Acute and obtuse angles can also be cut pre-cisely with the KG30/60. A smooth trimming cut prevents stress whitening of ABS edging. Hard metal cutting edges ensure excellent durability.
tEchnicAl dAtA:
Max. edging thickness 2 mm Max. Edge width 45 mm
tEchnicAl dAtA:
Max. edging thickness: Max. edge height: 0.8 mm - 1.5 mm 45 mm 1.5 mm - 3.0 mm 23 mm
tEchnicAl dAtA:
Max. edging thickness: Max. edge height: 0.3 mm - 2.0 mm 45 mm 3.0 mm 23 mm
tEchnicAl dAtA:
Max. edging thickness 3 mm Max. edge height 50 mm Weight 1.9 kg
order no. description 92101530 KG30G
ordEr nuMbErs:
order no. description 29101525 KG30/60
ordEr nuMbErs:
dEtAils: dEtAils:
ENd TrIMMErS ENd TrIMMErS
End trimmer KG30G
Precise trimming of 90°....
....or obtuse angles.
... 30°...
Max. cutting height: 50mm, edging thicknessup to 3 mm.
End trimmer KG30/60
EdgE ProcEssing – Mobile Edge Processing10
Edge trimming machine for processing longitudinal edges on straight and cambered work pieces and for edge processing.
KFr130N edge trimming machine
EquiPMEnt:
• Control electronics with soft start and constant speed control - powerful and flexible, with speed adjustment for various materials!
• Combination trimming attachment - processing longitudinal edges on straight and cambered work pieces, plus perfect corner processing with a single machine.
• Radius / flush cutter 2 mm - flush and radius cutting of edges in a single process step.
• Trimming bit with offset shaft - consistent positioning for tooling changes. Reduces setup work.
• Adapter for dust extraction - straightforward connection to an external extraction system.
• Bearing brake - the start-up ball bearing of the trimming machine is braked to avoid abrasion / burn marks or scratches on the work piece.
tEchnicAl dAtA:
Voltage 230V, 50 Hz Load 750 W Collet chucks Ø 6 / 6.35 / 8 mmIdle speed 14,000 - 30,000 RPM-1
Weight 1.6 kg
KFR130N edge trimming machine
The new WEGOMA hard metal radius cutters have an offset shaft. This allows the trimming cutter to be positioned the same way every time. Compatible with all common hand trimming machines.
dEtAils:
Simultaneous flush and radius cutting of the longitudinal edge in a single process step.
Straightforward changeover from longitudinal edge to corner processing.
Very simple processing of straight and cambered work pieces.
Precise guidance for rounding the corner.
Extraction adapter with bearing brake against scratches and burn marks on the edge.
Straightforward selection of the desired trimming depth with precision adjustment.
EdGE TrIMMING MAChINES
• Trimming attachment with precision adjustment - simple selection of the desired trimming depth.
• Collet chuck 8 mm – compatible with all common trimming tools
optional:• Round trimming plate - with 3 slide plates for
adjustment to various trimming cutter diame-ters, 20, 26 and 30 mm bores.
• Collet chucks – 6, 6,35 and 8 mm.• Trimming tools - radius cutters, bevel cutters etc.
www.wegoma-holz.de 11
ordEr nuMbErs:
order no. description 21000009 KFR130N-O, without machine case, with combination trimming attachment, hard metal trimming cutter 2 mm, adapter for dust extraction and bearing brake 21000010 KFR130N-M, in machine case, with combination trimming attachment, hard metal trimming cutter 2 mm, adapter for dust extraction and bearing brake 97000025 Combination trimming attachment for KFR130N, DKF32 and KFR30, with dust extraction and bearing brake 92000332 Trimming plate complete for KFR130 with slide plate bore 20, 26, 30 mm, dust extraction and bearing brake 21000075 KFR130N motor with D=8 mm collet chuck 92102402 Extraction adapter for KFR130N and DKF32 complete with bearing brake and star handle screw 21000035 DKF32-O without machine case, with combination trimming attachment and trimming plate, hard metal trimming cutter 2 mm, adapter for dust extraction and bearing brake 21000034 DKF32-M with machine case, combination trimming attachment and trimming plate, hard metal trimming cutter 2 mm, adapter for dust extraction and bearing brake 96001911 6 mm collet chuck for KFR130N 96001961 6.35 mm collet chuck for KFR130N 96002171 8 mm collet chuck for KFR130N 97000010 6 mm collet chuck for DKF32 97000009 8 mm collet chuck for DKF32 97000018 Hard metal rounding cutter R=2 mm with offset shaft, start-up ball bearing for KFR130N and DKF32 97000019 Hard metal rounding cutter R=3 mm with offset shaft, start-up ball bearing for KFR130N and DKF32 96000101 Hard metal bevel cutter 15° with start-up ball bearing for KFR130N and DKF32 96000097 Hard metal bevel cutter 45° with start-up ball bearing for KFR130N and DKF32
dKF32 compressed air edge trimming machineCompressed air edge trimming machine for processing longitudinal edges and corners.
EquiPMEnt:
• Compressed air motor with oil maintenance unit - powerful, light and flexible.
• Combination trimming attachment - processing longitudinal edges on straight and cambered work pieces, plus perfect corner processing with a single machine.
• Radius / flush cutter 2 mm - flush and radius cutting of edges in a single process step.
• Trimming cutter with offset shaft - consistent positioning for tooling changes. Reduces setup work.
• Adapter for dust extraction - straightforward connection to an external extraction system.
• Bearing brake - the start-up ball bearing of the trimming machine is braked to avoid abrasion / burn marks or scratches on the work piece.
• Trimming attachment with precision adjustment - simple selection of the desired trimming depth.
• Collet chuck 6+8 mm – compatible with all common trimming tools.
• Round trimming plate - with 3 slide plates for adjustment to various trimming cutter diameters, 20, 26 and 30 mm bores.
tEchnicAl dAtA:
Idle speed 22,000 RPM-1
Air pressure 6.5 bar Air consumption 145 litres/min Air connection 1/4 inch Tool adapter 8 mm Weight 1.2 kg
DKF32 compressed air edge trimming machine
EdGE TrIMMING MAChINES
optional:• Collet chucks – 6, 6,35 and 8 mm.• Trimming tools - radius cutters, bevel cutters etc.
Discover over 1,000 tools, devices, machines and accessories for professional wood processing in our comprehensive product range.
Sliding table panel saws · Edgebanding machines · Sanding machines · Portable edgebanding machines · Vacuum clamps · Feeding equipment · Hand planer · Hand sanders · Hand trimmers & routers · Mitre saws · Plunge saws, Floor saws, Frame saws · Dust extraction systems · End trimmers · Glue rollers · Accessories
WOOD PROCESSING TECHNOLOGY
Grombacher Straße 7075045 Walzbachtal - JöhlingenGermany
Telephone: +49 (7203) 9210-0Fax: +49 (7203) [email protected]
Your WEGOMA® Specialised dealer:
Related Documents
