EDGE permaloc - Expocrete · Finishes include: Mill (natural aluminum), Black DuraFlex (electrostatically applied, baked on paint), Green DuraFlex, Bronze DuraFlex, and Black Anodized.

EDGE

R ESTR A I N T S

CleanLineTM

CleanLineTM is a complete series of commercial grade aluminum landscape edgings designed to function in professional landscapes. CleanLine is engi-neered to maximize design sustainability by withstanding the demands of professional lawn maintenance and high volume pedestrian traffic. Excep-tional flexibility allows graceful curves and angles to be readily formed.

• CleanLine is engineered to allow for effortless installation and creates a beautiful, clean edge in any landscape.

• Designed with a unique, patented stakeless connection system that snaps down to permanently interlock adjacent edging sections - eliminating hori-zontal separation or possible weak points.

• Includes heavy-duty 12” interlocking aluminum stakes that securely anchor it into the ground, providing long-term retention and ensuring that your designs will stand the test of time.

Commercial Grade Landscape EdgingSUSTAINABLE EDGING SOLUTIONSpermaloc®

1. Product NamePermaloc CleanLine

2. ManufacturerPermaloc Corporation13505 Barry StreetHolland, MI 49424Ph: 616.399.9600 800.356.9660Fax: 616.399.9770Email: [email protected]

3. Product DescriptionPermaloc CleanLine is a complete series of commercial grade aluminum landscape edgings designed to function in professional landscapes.

CleanLine is engineered to maximize design sus-tainability and provide long-term durability by withstanding the demand of professional lawn maintenance and volume pedestrian traffic.

A unique patented, stakeless connection sys-tem snaps down to permanently interlock adjacent edging sections eliminating possible weak points.

The Permaloc system speeds installation while providing long-term retention ensuring that landscape designs will stand the test of time.

SIZESCleanLine is available in 1/8” or 3/16” thick-ness by 3”, 4”, or 5-1/2” depths. Sections avail-able in 8’ or 16’ lengths.

FINISHESFinishes include: Mill (natural aluminum), Black DuraFlex (electrostatically applied, baked on paint), Green DuraFlex, Bronze DuraFlex, and Black Anodized.

STAKESHeavy 12” aluminum stakes are included with each section and lock into the edging securely anchoring it into the ground.

Each 16’ section includes 5 stakes, while each 8’ section includes 3 stakes. The 16’ sections also allow for additional staking 2’ on center.

When necessary, longer stakes are available and may be upgraded to 18” or 24” lengths.

CONNECTIONOur patented interlocking Snap-Down con-nection eliminates possible weak points in the system. Our permanent connection is stake-less, and requires no additional parts or pieces.

ACCESSORIESA Grade Change Connector and End Splice Adaptor are available.

4. Technical DataGENERAL Manufactured of 6063 Alloy containing Silicon and Magnesium as the major alloying ele-ments, contributing to good strength, corro-sion resistance, weldability, and machinability.

According to the Aluminum Extruders Coun-cil (AEC) publication Extrusion Spotlight Al-loys, aluminum alloyed in the 6XXX series contain the following desirable properties: 1. Very lightweight, one-third that of steel and concrete. 2. High strength, comparable to steel and steel/concrete composites. 3. Strength and ductility as high or higher at sub-zero temperatures than at room temperature. 4. Exceptional corrosion resistance. 5. Ease of fabrication by many techniques, including extrusion, to unique advantageous structural configurations. This publication can be found at www.aec.org.

EXTREME LOW TEMPERATUREThe many advantages of extruded aluminum are not impaired by exposure to low temper-atures. Aluminum actually gains strength as temperature is reduced, making it an appro-priate metal for low temperature applications.

ULTRAVIOLET RADIATIONAluminum reflects ultraviolet radiation and is not damaged by it. Sunlight includes ultra-violet (electromagnetic) radiation which may cause chemical or structural changes in some commercial materials.

COMBUSTABILITYExtruded aluminum will not burn, which makes it safer than many other materials, such as wood, paper, or plastic for design applica-tions. Extruded aluminum does not emit any toxic, hazardous fumes when exposed to high temperatures.

5. InstallationPREPARATIONEnsure that all underground utility lines are lo-cated and will not interfere with the proposed edging installation before beginning work. Lo-cate border line of edging with string or oth-er means to assure border straightness and curves as designed. Dig trench 1 inch deeper than set of edging bottom.

PLACEMENTSet edging into trench with top at 1⁄2 inch above compacted finish grade on turf side with side having loops for stakes placed on opposite side of turf. Drive stakes through edging loops until locked in place. Requires 5 stakes evenly spaced for each 16’ section, or 3 stakes evenly spaced for each 8’ section with a total of 8 stake loops available in each 16’ sec-tion if necessary. Provide additional stakes at approximately 24 inches apart, longer stakes, heavier gage stakes, or any combination of

previously mentioned as necessary to firmly secure edging for permanent intended use.

CORNERS/ANGLESWhere edging sections turn at corners or at angled runs, cut edging partially up through its height from bottom and turn back to desired angle.

BACKFILLING AND CLEANUPBackfill both sides of edging, confirm and ad-just if necessary that sections are securely held together, and compact backfill material along edging to provide top of edging at 1/2 inch (12.7 mm) above turf finish grade. Clean-up and remove excess material from site.

6. Availability & CostAVAILABILITYProduct is supported by a global network of distributors. Consult manufacturer for infor-mation on local availability.

COSTInformation regarding budget and installed costs can be obtained from the manufacturer.

7. Warranty15-year limited material warranty for land-scape edging from manufacturing defects in workmanship or material. Contact manu-facturer for more information on warranty terms.

8. MaintenancePermaloc edging systems typically require maintenance only in the event that the land-scape design is changed.

9. Technical ServicesPermaloc Corporation works closely with the specifier to ensure the appropriate products are chosen for the application. For technical assistance, contact the manufacturer.

10. Filing SystemsAdditional product information is available from the manufacturer at www.permaloc.com or by calling 1.800.356.9660.

For additional specification information and drawings, please visit www.permaloc.com.

Permaloc Corporation

LANDSCAPE EDGING 32 94 13

SUSTAINABLE EDGING SOLUTIONSpermaloc®


EDGE

R ESTR A I N T S

StructurEdgeTM

StructurEdgeTM is a permanent, aluminum paving restraint system that is designed to be easier to install and out-perform plastic, PVC and steel systems. Its tight-fitting L-shaped design promotes healthy turf and accom-modates irrigation heads. StructurEdge readily forms to curves, radii and angles, as well as straight lines, allowing wide installation flexibility.

• StructurEdge is a versatile product that can be easily installed under the paver or away from the paver. In addition, each piece is capable of perform-ing straight or curvilinear applications.

• StructurEdge’s interlocking sliding connectors eliminate possible weak points. A low profile design allows for healthy turf and irrigation heads im-mediately adjacent to pavers (unlike bulky triangular restraints).

• StructurEdge allows a single part to be used for curves, angles and straight lines with minimal effort.

Aluminum Brick & Paver RestraintSUSTAINABLE EDGING SOLUTIONSpermaloc®

1. Product NamePermaloc StructurEdge


3. Product DescriptionStructurEdge is designed for the areas where hardform and natural landscape meet. Design-ers tell us that these areas are the most difficult to retain, although well defined on paper, their clarity is often lost to the realities of time and ongoing maintenance.

StructurEdge is a permanent paving restraint system that is designed to be easier to install and out-perform plastic, P.V.C. and steel sys-tems.

StructurEdge readily forms to curves, radii and angles allowing wide installation flexibility.

StructurEdge provides a clean, unobstructed edge along the paver installation allowing the use of a power edger directly adjacent to the paving stones.

SIZESStructurEdge is available in 3/32”, 1/8”, or 3/16” thickness by 1-5/8” and 2-1/4” depths. Sections available in 8’ lengths.

FINISHESFinishes include: Mill (natural aluminum), Black DuraFlex (electrostatically applied, baked on paint).

ANCHORINGAnchoring is accomplished through the use of 10” spiral steel spikes and is designed to receive spikes every 4”. Other anchoring op-tions may be applicable.

CONNECTIONOur unique sliding connection system elimi-nates possible weak points in the system.

4. Technical DataGENERAL Manufactured of 6063 Alloy containing Silicon and Magnesium as the major alloying ele-ments, contributing to good strength, corro-sion resistance, weldability, and machinability.

According to the Aluminum Extruders Coun-cil (AEC) publication Extrusion Spotlight Al-loys, aluminum alloyed in the 6XXX series contain the following desirable properties: 1. Very lightweight, one-third that of steel

and concrete. 2. High strength, comparable to steel and steel/concrete composites. 3. Strength and ductility as high or higher at sub-zero temperatures than at room temperature. 4. Exceptional corrosion resistance. 5. Ease of fabrication by many techniques, including extrusion, to unique advantageous structural configurations. This publication can be found at www.aec.org.



COMBUSTABILITYExtruded aluminum will not burn, which makes it safer than many other materials, such as wood, paper, or plastic for design applica-tions. Extruded aluminum does not emit any toxic, hazardous fumes when exposed to high temperatures.

5. InstallationPREPARATIONEnsure that all underground utility lines are located and will not interfere with the pro-posed edging installation before beginning work. Locate border line of edging with string or other means to assure border straightness and curves as designed.

PLACEMENTInstall base of edging resting on compacted level base and facing [away from] [towards and under] paver, drive 3/8” x 10” (9.5 mm x 254 mm) bright spiral steel spikes through edging holes in section base of paver restraint edging at spaces for following applications:1. Anchor each section end with spike.2. Patios and Walkways: 12 inches (305 mm) to 24 inches (610 mm) on center.3. Driveways: 4 inches (102 mm) to 12 inches (305 mm) on center.4. Heavy Vehicular Loads: 4 inches (102 mm) on center.

CORNERS/ANGLESWhere edging sections turn at corners or angled runs, use hands or other object to form edging to desired shape. Edging can be hand formed to curves or intricate angles and shapes with minimal effort.

BACKFILLING AND CLEANUPBackfill and compact backfill material along edging. Cleanup and remove excess material

from site.



7. Warranty15-year limited material warranty for edging from manufacturing defects in workmanship or material. Contact manufacturer for more information on warranty terms.

8. MaintenancePermaloc edging systems typically require maintenance only in the event that the land-scape design is changed.


10. Filing SystemsAdditional product information is available from the manufacturer at www.permaloc.com or by calling 1.800.356.9660.

For additional specification information and drawings, please visit www.permaloc.com.


PAVING SPECIALTIES 32 17 00



EDGE

R ESTR A I N T S


BrickBlockTM

BrickBlockTM is an economical aluminum paving restraint system that is designed to be easier to install and out-perform plastic, PVC and steel systems. BrickBlock has two base options, each allowing one part to be used for both straight and curvilinear applications. A low profile promotes healthy turf growth and allows for irrigation heads along the paver’s edge.

• BrickBlock’s QuickClipTM connection system allows pieces to connect together effortlessly. Simply butt two ends together and slide the clip over the top to firmly join pieces.

• The engineered ACCUTRACTM Base maintains outstanding performance for both straight and curvilinear applications. To form smooth curves, sim-ply cut the bridge support.

• The V-TRACTM Base is notched to allow for smooth curves with no cutting.

• BrickBlock readily forms curves, radii and angles, allowing installation flexibility.

Aluminum Brick & Paver Restraint

1. Product NamePermaloc BrickBlock


3. Product DescriptionBrickBlock is designed for the areas where hardform and natural landscape meet. Design-ers tell us that these areas are the most difficult to retain, although well defined on paper, their clarity is often lost to the realities of time and ongoing maintenance.

BrickBlock is a patented, permanent paving re-straint system that is designed to be easier to install and out-perform plastic, P.V.C. and steel systems.

Two base options make BrickBlock the most versatile paver edging product available.

BrickBlock’s AccuTracTM Base System readily forms to curves, radii and angles allowing wide installation flexibility. The V-TRACTM Base Sys-tem is notched to form curves with no cutting. Each option allows one part to be used for straights and curves.

BrickBlock provides a clean, unobstructed edge along the paver installation allowing the use of a power edger directly adjacent to the paving stones.

SIZESBrickBlock is available in .065” or .075” thick-ness by 1-3/4” or 2-3/4” depths. Sections available in 8’ lengths.

FINISHESFinishes include: Mill (natural aluminum), Black DuraFlex (electrostatically applied, baked on paint).

ANCHORINGAnchoring is accomplished through the use of 10” spiral steel spikes and is designed to receive spikes every 4”. Other anchoring op-tions may be applicable.

CONNECTIONOur patented QuickClipTM connection elimi-nates possible weak points in the system.

4. Technical DataGENERAL Manufactured of 6063 Alloy containing Silicon and Magnesium as the major alloying ele-ments, contributing to good strength, corro-

sion resistance, weldability, and machinability.

According to the Aluminum Extruders Coun-cil (AEC) publication Extrusion Spotlight Al-loys, aluminum alloyed in the 6XXX series contain the following desirable properties: 1. Very lightweight, one-third that of steel and concrete. 2. High strength, comparable to steel and steel/concrete composites. 3. Strength and ductility as high or higher at sub-zero temperatures than at room temperature. 4. Exceptional corrosion resistance. 5. Ease of fabrication by many techniques, including extrusion, to unique advantageous structural configurations. This publication can be found at www.aec.org.



COMBUSTABILITYExtruded aluminum will not burn, which makes it safer than many other matierals, such as wood, paper, or plastic for design applica-tions. Extruded aluminum does not emit any toxic, hazardous fumes when exposed to high temperatures.

5. InstallationPREPARATIONEnsure that all underground utility lines are located and will not interfere with the pro-posed edging installation before beginning work. Locate border line of edging with string or other means to assure border straightness and curves as designed.

PLACEMENTInstall base of edging resting on compacted level base and facing [away from] [towards and under] paver, drive 3/8” x 10” (9.5 mm x 254 mm) bright spiral steel spikes through edging holes in section base of paver restraint edging at spaces for following applications:1. Anchor each section end with spike.2. Patios and Walkways: 12 inches (305 mm) to 24 inches (610 mm) on center.3. Driveways: 4 inches (102 mm) to 12 inches (305 mm) on center.4. Heavy Vehicular Loads: 4 inches (102 mm) on center.

CORNERS/ANGLESWhere edging sections turn at corners and at angled runs, cut bridge support of ACCU-

TRAC base system, and use hands or other object to form edging to desired shape. If using the V-TRAC base, simply use hands or other object to form the edging. Edging can be hand formed to curves or intricate angles and shapes with minimal effort.

BACKFILLING AND CLEANUPBackfill and compact backfill material along edging. Cleanup and remove excess material from site.



7. Warranty15-year limited material warranty for land-scape edging from manufacturing defects in workmanship or material. Contact manu-facturer for more information on warranty terms.

8. MaintenancePermaloc edging systems typically only require maintenance in the event that the landscape design is changed.


10. Filing SystemsAdditional product information is avail-able from the manufacturer at www.per-maloc.com or by calling 1.800.356.9660.

For additional specification information and drawings, please visit www.permaloc.com.SUSTAINABLE EDGING SOLUTIONSpermaloc®



PAVING SPECIALTIES 32 17 00

EDGE permaloc - Expocrete · Finishes include: Mill (natural aluminum), Black DuraFlex (electrostatically applied, baked on paint), Green DuraFlex, Bronze DuraFlex, and Black Anodized.

Documents