Top Banner
404-344-0000 www.tiedown.com 605 Stonehill Drive SW, Atlanta, GA 30336 [email protected] www.tiedown.com 404-344-0000 E1797 Rev. 9/14/20 EFPS is Fully Compliant with: • USA standards: OSHA 1926.502(b) Fall Protection – Guardrail Systems; ANSI/ASSE A10.18-2007 • Safety Requirements for Temporary Roof and Floor Holes, Wall Openings, Stairways and Other Unprotected Edges in Construction and Demolition Operations WISH A/WAC 239-155-24601 Fall Protection Requirements for Construction • European standards: BS EN 13374:2004 Temporary edge protection systems (class A) • Canadian standards: Occupational Health and Safety Act of Ontario; Section 26.3 EDGE FALL PROTECTION SYSTEMS EFPS ADVANTAGES 100% steel system Recyclable system offers additional savings with steel scrap recovery and wood disposals compared to traditional systems Drill free option for ceilings up to 12 ft. and 14 ft. with our additional compression post extension Faster installation than wood and cable rail systems, providing an average installation time of 10' / min (Total cycle time of 400' / 3 hours) High visibility color on site & neat uniform look. Custom colors available 1/2 in. fine steel mesh for additional debris protection, with wind load rates of 110 mph Quick visual inspection made possible with visible red indicator showing incorrect installation
3

EDGE FALL PROTECTION SYSTEMS - Tie Down Engineering

Feb 17, 2022

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: EDGE FALL PROTECTION SYSTEMS - Tie Down Engineering

404-344-0000 • www.tiedown.com605 Stonehill Drive SW, Atlanta, GA 30336

[email protected]

www.tiedown.com404-344-0000

E1797 Rev. 9/14/20

EFPS is Fully Compliant with:• USA standards: OSHA 1926.502(b) Fall Protection – Guardrail Systems; ANSI/ASSE A10.18-2007• Safety Requirements for Temporary Roof and Floor Holes, Wall Openings, Stairways and Other Unprotected Edges in Construction and Demolition Operations WISH A/WAC 239-155-24601 Fall Protection Requirements for Construction• European standards: BS EN 13374:2004 Temporary edge protection systems (class A)• Canadian standards: Occupational Health and Safety Act of Ontario; Section 26.3

EDGE FALLPROTECTION SYSTEMSEFPS ADVANTAGES

100% steel system Recyclable system offers additional savings with steel scrap recovery and wood disposals compared to traditional systems Drill free option for ceilings up to 12 ft. and 14 ft. with our additional compression post extension Faster installation than wood and cable rail systems, providing an average installation time of 10' / min (Total cycle time of 400' / 3 hours) High visibility color on site & neat uniform look. Custom colors available 1/2 in. fine steel mesh for additional debris protection, with wind load rates of 110 mph Quick visual inspection made possible with visible red indicator showing incorrect installation

Page 2: EDGE FALL PROTECTION SYSTEMS - Tie Down Engineering

www.tiedown.com404-344-0000

TIE DOWN Safety Products Division • 800-241-1806 • 404-344-0000 • www.tiedown.com

Tie Down's Edge Fall Protection System (EFPS) is a safe and efficient way to protect workers from leading edge fall hazards. EFPS is wind tunnel verified up to 110 mph and meets both OSHA and ANSI requirements.

The EFPS comes with easy-to-use accessories, like a corner return bracket, that make our product the mostcost-effective system on the market.Kits are available in 780 linearfoot bundles.

This system offers a double stack feature that meets OSHA 1926, ANSI A10, and CSA standards. This leading edge product includes a go/no go indicator for quick verification of a properly installed perimeter edge system.

Page 3: EDGE FALL PROTECTION SYSTEMS - Tie Down Engineering

www.tiedown.com404-344-0000

Safety Products Division605 Stonehill Drive SW, Atlanta, Georgia 30336404-344-0000 • www.tiedown.comISO 9001:2015 CertificationIntellectual Property of TIE DOWN Inc. ©2020 TIE DOWN, Inc.Instruction #08290 (E1797 Rev. 9/14/20)

EDGE FALL PROTECTION SYSTEMS

EFPS Set with Post Part #14340

Kit includes:110 Post with Crate (weight 1,951 lbs.)110 Fence with Corner Protectors & Crate (2 crates with 55 fences, weight 1,290 lbs. each)

EFPS Set with Floor Bracket Part #14341

Kit includes:110 Floor Brackets with Crate (weight 682 lbs.)110 Fence with Corner Protectors & Crate (2 crates with 55 fences, weight 1,290 lbs. each)