Eclipse Yoke NOTES: In this portion of calibrating our CH Products Devices we will be going through the steps to calibrate the Eclipse Yoke. We will be.

Eclipse Yoke

NOTES:

In this portion of calibrating our CH Products Devices we will be going through the steps to calibrate the Eclipse Yoke.

We will be calibrating the:

X Axis: AileronY Axis: ElevatorZ Axis: ThrottleR Axis: RudderU Axis: PropV Axis: Mixture

Click the calibrate button seen above…

Eclipse Yoke Calibration

Eclipse Yoke

NOTES:

Using your mouse, Trackball or, Trackball Pro click on the CH FighterStick USB.

Then, click on the Okay button…

Eclipse Yoke

NOTES:

This screen in the Control Manager GUI will allow you to Test/Calibrate your Eclipse Yoke as well as adjust your Axis Settings.

For the purpose of this calibration I will not adjust the Axis Settings.

Now is a good time to insure the Yokes X and Y axis are centered.

To Calibrate your Eclipse Yoke, click on the Calibrate button…

Eclipse Yoke

NOTES:

The steps involved in calibrating the Yoke are pretty simple and easy to follow.

You will be prompted to move and hold the Yoke:

LeftRightForward andAft…

Press Click!

Eclipse Yoke

NOTES:

Eclipse Yoke

NOTES:

CONTROL MANAGER v4.55 FOR DUMMIES

Eclipse Yoke

NOTES:

CONTROL MANAGER v4.55 FOR DUMMIES

Eclipse Yoke

NOTES:

Eclipse Yoke

NOTES:

The Throttle Lever [A3] is the furthest left of the three levers (Black Knob)

To insure full travel of your throttle axis [Z] in your game of choice DO NOT move the throttle lever to its full back, or full forward position.

Eclipse Yoke

NOTES:

Eclipse Yoke

NOTES:

In these next steps you will be prompted to move and hold the Rudder Levers…

And Click!

Eclipse Yoke

NOTES:

Eclipse Yoke

NOTES:

Eclipse Yoke

NOTES:

The Prop Lever [A5] is the middle of the three levers (Blue Knob)

To insure full travel of your prop axis [U] in your game of choice DO NOT move the throttle lever to its full back, or full forward position.

Eclipse Yoke

NOTES:

Eclipse Yoke

NOTES:

The Mixture Lever [A6] is the middle of the three levers (Red Knob)

To insure full travel of your mixture axis [V] in your game of choice DO NOT move the mixture lever to its full back, or full forward position.

CONTROL MANAGER v4.55 FOR DUMMIES

Eclipse Yoke

NOTES:

Eclipse Yoke

NOTES:

Check the range of your axes:

X: 0-255 R: 0-255Y: 0-255 U: 0-255Z: 0-255 V: 0-255

The Raw Data may (probably will) fluctuate a small amount, typically not enough for your game to be affected.

Click: Apply…

Eclipse Yoke

NOTES:

Move the Yoke aft and turn it to the right.

Press the right Rudder axis all the way in.

Move the three levers (Throttle, Prop, and Mixture) all the way aft…

Press:

Eclipse Yoke

NOTES:

Move the Yoke forward and turn it to the left.

Press the left Rudder axis all the way in.

Move the three levers (Throttle, Prop, and Mixture) all the way forward…

Press:

Eclipse Yoke

NOTES:

Center the Yoke.

Center the Rudder axis.

Move the three levers (Throttle, Prop, and Mixture) to their center position…

And you are Done.