CLEARANCE CPU Cooler Height 160mm PSU Clearance 270mm GPU Clearance 420mm E-ATX Motherboard 360mm Front radiator 280mm Front radiator 272mm 130x420x115mm 145x325mm REAR 120 FAN 120 RAD TOP 120 FAN 140 FAN 140 FAN 140 RAD FRONT 120 FAN 120 RAD Solid Breathing Color Cycle Short Press to change color: Long Press to change mode: Press and Hold to turn off or switch to motherboard control. COLORS 2 SEC MODES SOLID BREATHING RADAR SPARKLE RAINBOW PRESS AND HOLD THE MODE BUTTON TO TURN OFF LEDS English 1. Headphone 2. Microphone 3. USB 3.0 4. HDD LED 5. Power Button 6. Fan Control 7. Reset Button 8. RGB Control 9. D-RGB Mode 10. D-RGB Color Francais 1. Casque 2. Microphone 3. USB 3.0 4. HDD LED 5. Bouton d’alimentation 6. Contrôle du ventilateur 7. Bouton de réinitialisation 8. RGB Contrôle 9. D-RGB Mode 10. D-RGB Couleur Deutch 1. Kopfhörer 2. Mikrofon 3. USB 3.0 4. HDD LED 5. Ein-/Aus Schalter 6. Lüftersteurung 7. Reset-Knopf 8. RGB Steurung 9. D-RGB Modus 10. D-RGB Farbe Espanol 1. Auricular 2. Micrófono 3. USB 3.0 4. HDD LED 5. Botón de encendido 6. Control del ventilador 7. Botón de reinicio 8. RGB Controlar 9. D-RGB Mode 10. D-RGB Color Thank you for choosing Phanteks. Please take a moment to carefully go through the manual. Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product. This manual is applicable for the following products: PH-EC400ATG PH-EC400ATG_D PH-EC416PTG PH-EC416PSTG ECLIPSE P400(S) FRONT I/O ECLIPSE P400A FRONT I/O RGB CONTROLS (P400(S) MODELS) Digital-RGB CONTROLS (P400A_D MODEL) INTRODUCTION INCLUDED ACCESSORIES Eclipse P400A / Eclipse 400(S) 120 mm Case Fan (Pre-Installed) 2.5” SSD Bracket (Pre-Installed) 2x Thumb Screw 4x PSU Screw 12x Fan Screw 1x This Manual 6x Zip Tie 22x Motherboard + SSD Screw 1x Motherboard Standoff PRODUCT OVERVIEW LIGHTING CONTROLS ECLIPSE P400A / P400(S) INSTALLATION GUIDE V1.0 Press and Hold to turn off the case controller to sync with the motherboard RGB or D-RGB software. The 3-pin fan controller allows you to set any connected fans to low, medium or full speed. 1. Headphone 2. Microphone 3. USB 3.0 5. Power Button 4. HDD LED 1. Headphone 2. Microphone 3. USB 3.0 5. Power Button 4. HDD LED 7. Reset Button 8. RGB Control 6. Fan Control 7. Reset Button 10. D-RGB Color 6. Fan Control 9. D-RGB Mode P400S only P400A_D only P400A_D only P400A only P400A only 6. Reset Button P400A_D only *remove the mid-plate cover CABLE CONNECTION OPTIONAL UPGRADES CONNECT TO D-RGB LIGHTING PRODUCTS (P400A_D MODEL) CONNECT TO RGB LIGHTING PRODUCTS (P400(S) MODELS) VERTICAL GPU BRACKET (PH-VGPUKT-02) MODULAR HDD BRACKET (PH-HDDKT_02) CONNECT TO THE MOTHERBOARD CONNECT TO THE POWER SUPPLY RAINBOW ADDRESSABLE ADDRESSABLE MOTHERBOARD D-RGB HEADER To D-RGB Motherboard (optional) Compatible with: MOTHERBOARD RGB HEADER To RGB Motherboard (optional)* 12V G R B 12V Compatible with: SATA CONNECT TO THE 3-PIN FANS To DIGITAL-RGB Products To RGB Products THE PHANTEKS VERTICAL GPU BRACKET CAN BE EASILY INSTALLED IN THE REAR PCI-SLOT AREA WITHOUT MODIFICATIONS. FOLLOW THE INSTRUCTION THAT COME WITH THE VERTICAL GPU RACKET. UP TO 4 ADDITIONAL HDD DRIVES CAN BE INSTALLED USING THE MODULAR HDD BRACKET. ECLIPSE P400A / P400(S) INSTALLATION GUIDE V1.0 *P400S and P400A models only To 3-PIN FAN *Motherboard Adapter is sold separately (PH-CB_RGB4P)