Eclipse EHX System Logic Maestro. Module Objective Introduce Logic Maestro to the user Elements ► What is Logic Maestro ► How does Logic Maestro relate.

Eclipse EHX SystemLogic Maestro

Module Objective

Introduce Logic Maestro to the user

Elements► What is Logic Maestro► How does Logic Maestro relate to the EHX map► Creating Logic Maestro Diagrams ► Worked practical example► Hands On

LOGIC MAESTRO

Logic maestro diagrams are used to provide extra functionality or custom functionality which cannot be achieved using the standard functions within the EHX environment.

► Logic maestro diagrams allow the configuration map that controls the matrix operation to be directly modified via a logic maestro diagram script.

► Crosspoint triggers or EHX controls can be used to activate the following…► Logic gates (AND , NOR , OR) to enable transmission logic or Studio red light switching► Crosspoint actions to provide additional routing within the matrix.► Switch on/off panel LEDS, microphone and LS

Use simple drag and drop to move logic symbols or port labels into the work space. Connect the logic gates to produce your logic diagram.

WHAT IS LOGIC MAESTRO

LOGIC MAESTRO

Logic Maestro Manager is installed as part of the standard EHX installation on ECS V5.1 or above

► Logic Maestro manager screen allows the user to select which Logic Maestro diagrams or control macros to tag to a configuration

► Logic Maestro diagrams are universal and can be tagged to any configuration map / system. As long as the control labels or port labels or groups used in the diagrams appear in the configuration map to which the scripts are tagged to.

► Logic Maestro manager screen also allows the user to ► Create new logic maestro diagrams or control macros► Import logic maestro diagrams or control macros► Delete, Export or Clone (copy) logic maestro diagrams or

control macros

► When a configuration is imported, exported or uploaded from the matrix. The tagged logic maestro diagrams are also included


LOGIC MAESTRO

Examples of what Logic Maestro diagrams can be used for:

► To enable or disable a route between any Local source and Local destination, which may be conditional on the status of other Crosspoints, Controls, Routes or GPIs. Enable priority routes to be setup

► The controls used in Logic Maestro can also be programmed with routes or attached to GPIs and Vox actions

► Enable or disable a panel’s loudspeaker (dimming/ muting)

► Allow the user to remotely mute a panel’s microphone

► Allow the user to remotely enable / disable a panel’s headset/ microphone selection

► Allow the user to flash the Key LED on a panel

Note: Existing Control Macros can also be accessed using the Logic Maestro Manager screen


LOGIC MAESTRO

The Logic manager application is an integrated part of the EHX install. However EHX labels and port names must be passed to the Logic maestro. The logic maestro diagrams are sent down as part of the map and are also stored as part of the map and can even be uploaded from the matrix

EHX Application

Talk / listen Labels, Groups , Controls,

Logic Maestro Application Diagrams

Download to matrix

EHX map

HOW DO LOGIC MAESTRO DIAGRAMS RELATE TO THE EHX MAP

LOGIC MAESTRO

Because Logic Maestro diagrams can be applied to any map. It is Clear-Coms’ aim that

► Common diagrams will be shared within the ClearCom user community via the partner login web site

► Users will quickly learn to cut and paste functions from one diagram to another in order to achieve the required function

► Common diagrams that appear to be used at most installations will be transferred into the main EHX application

►Universal Passcode (Logic Maestro) 934CMAC5B44841CE05AD

► Clear-Com Engineers will aid users to generate Logic maestro diagrams (in some cases this will be a paid for service)

CLEARCOM LOGIC DIAGRAM USERS

LOGIC MAESTRO

The logic maestro manager editor can be found in the EHX Configuration group

STARTING THE LOGIC MAESTRO MANAGER screen

LOGIC MAESTRO

When the Logic maestro manager opens it presents a list of existing diagrams or control macros . These can then be enabled to work with the current configuration map

Edit a diagram

Edit the name,

description of the

diagram

Start a new diagram or import a diagram

Delete , Export or Clone (copy) the highlighted

diagram(s)

STARTING THE LOGIC MAESTRO MANAGER screen

LOGIC MAESTRO

Selecting Edit Logic will open a new logic maestro diagram screen. Use simple drag and drop to move logic symbols or port labels into the work space. Connect the logic gates to produce your logic diagram.

BASIC LOGIC MAESTRO PROGRAMMER

Drag and drop the logic gates

Drag and drop config elements (panels,

interfaces, controls , groups) into the

diagram

Online complier warns user of any errors

Controls can be attached to panel keys or GPI

inputs using EHX

LOGIC MAESTRO

Add notes to the diagram by right mouse click anywhere in the work space

Right button click to show options

BASIC LOGIC MAESTRO

LOGIC MAESTRO

AND GATE

BUFFER

NOTGATE

NAND GATE

OR GATE

LATCHLogical Flip-Flop

Switch Q output or /Q output depending on the state of the latch

CROSSPOINT ACTION FUNCTIONMake crosspoint from source to destination

CROSSPOINT TRIGGER FUNCTION

Trigger an action, whenever there is a crosspoint made between source and

destination

LOGIC MAESTRO SYMBOLS

LOGIC MAESTRO

EHX Control label Input GATE

Permanent OFF trigger

PANEL ACTION FUNCTIONSwitch on Panel actionsLS Cut / DimLED on/off/flashMIC muteHeadset select

LOGIC MAESTRO SYMBOLS

EHX Control label Output

GATE

Permanent ON trigger

LOGIC MAESTRO

Use simple drag and drop to move port names or Controls into the work space.

Drag and drop config elements (panels,

interfaces, controls , groups) into the

diagram

BASIC LOGIC MAESTRO

LOGIC MAESTRO

LOGIC MAESTRO MAIN TOOLBAR

Save – diagram to EHX config

Print out the diagram

Undo / Redo functions

Simulation mode

Run a simulation of the logic

Select the Speed option to change the speed of the

simulation

Refresh – config map elements (ports names etc..) If a new port or

control is added to in EHX while the logic programmer is open – use refresh to pick up the new

labels

Select which config to read port labels from

LOGIC MAESTRO

SIMULATING LOGIC MAESTRO DIAGRAMS

When the Simulation action is OFF it is a DARK grey colour

When the Simulation action is ON it is WHITE a colour

Double click on CTLA to switch the control on / off

Select the SPEED option to change the speed of the simulation

LOGIC MAESTRO

ANIMATED SLIDE

LOGIC DIAGRAM

“click next to start”

A SIMPLE “AND” GATE LOGIC DIAGRAM

NOW JUST SAVE AND DOWNLOAD THIS TO YOUR MATRIX

Expand the port list Select your Logic gate Select your port label Drag and drop the control Draw a line from the control to the logic gateDrag and drop the control

LOGIC MAESTRO

SIMPLE LOGIC DIAGRAM

A SIMPLE “AND” GATE LOGIC DIAGRAM

NOW JUST SAVE AND DOWNLOAD THIS TO YOUR MATRIX

LOGIC MAESTRO

Hands ON

WORKED EXAMPLE

LOGIC MAESTRO

DO I NEED A LOGIC MAESTRO DIAGRAM?

BEFORE STARTING A LOGIC MAESTRO DIAGRAM – CHECK TO SEE IF THE FUNCTION CANNOT BE MADE USING EHX

► Write down the steps in long hand that are needed to make the function.

► This helps you to understand what you are trying to achieve.

Example of a Logic diagram written in long hand

► When the label “CTLA”– button on panel..XX is pressed

► The RESULT should enable audio from 4wire STUD-LS to the EDIT panel

► Now turn these text lines this into a logic maestro diagram

Follow the next 4 steps

LOGIC MAESTRO

1) In your EHX map declare ► A direct (4wire) port called Stud LS► A panel port called EDIT ► A control label called CTLA and PLACE the CTLA label onto another panel key

2) Switch to the Logic Manager screen► Create a new logic maestro diagram► Drag control label CTLA on to the work space► Drag the Xpt ACTION box to the work space ► Drag the interface Stud LS label to the Add source section of the Xpt action box► Drag the panel EDIT label to the Add destination section of the Xpt action box► Join the CTLA label to the Xpt action box

BASIC LOGIC MAESTRO EXAMPLE

LOGIC MAESTRO

3) Simulation mode to test the diagram Click “SAVE” to save the diagram into the EHX configuration

4) Enable YOUR logic maestro diagram ► In the EHX logic manager window ENABLE the logic diagram and do an “apply label change”

download

Test if your logic maestro diagram is working

BASIC LOGIC MAESTRO EXAMPLE

LOGIC MAESTRO

Hands ON

Make simple logic diagrams,

► Make OR gate logic diagram ► Make AND gate logic diagram► Make a Xtp trigger logic diagram

► Remember to add relays / routes to controls in EHX

► Download your test map with apply label change

LOGIC MAESTRO

ADVANCE LOGIC DIAGRAMS

LOGIC MAESTRO - ADVANCED

1) Label not in current configuration.

If you import or open a logic diagram that has a red label – then the label cannot be found in the current configuration

ADVANCE FUNCTIONS

Use the refresh button to check the labels in the current config

Check EHX the port and control label names have been declared in the EHX configuration you are using

2) Advanced Gate functions

Right button click on a gate to

Add / remove inputs,

Change the logic gate type

Add comment


4) Delete un-used inputs

ADVANCE FUNCTIONS

Note double clicking on a logic gate will add extra inputs

Right button click on the logic symbol to add a sticky comment

3) Add sticky comments


5) Xpt Action functions

ADVANCE FUNCTIONS

Right button click on the Enable action section to change the xpt action

Right button click on the Xpt Pri (priority) section to change the priority level of the crosspoint action.

The user levels allow the logic programmer to set their own xpt levels



ADVANCE FUNCTIONS

Right button click on the Add sources section to add all ports or all panels

Drag a label from the config pallet to add single panels or ports or groups

Right button click on any single panel /port to include or exclude from the source list



ADVANCE FUNCTIONS

Right button click on the Add destination with the destination box collapsed (+)

and you can select to make the destination ports = the source ports

This brings up a new enable xpt action option – which allows you set the following options

► All to all

► Mix-minus

► Diagonal xpts


8) Xpt Trigger functions

ADVANCE FUNCTIONS

The Xpt trigger function has the same features as the Xpt action box

Double click on the description section to type in a description of the function


9) Panel Functions

ADVANCE FUNCTIONS Panel Functions can be set to enable or disable certain functions on the panel.

The Action box has 3 operating modes

Activate to Override Local - means that the function will become active when triggered on .

When if is not triggered the normal panel function operates

Permanent Override of Local – means when the action is triggered the function is always on

Advanced Override of Local – means the user has two control states

A master control and a trigger control


10) Panel Functions

ADVANCE FUNCTIONS

List of Panel Actions► LS Cut / Dim► LED on/off/flash► MIC mute► Headset select* note not all panel types support all the panel functions

List of Panel LED flash rates * note not all panel types support all the flash rates * note not all panel types support Red, Green, Amber LED signalisation


SAMPLE LOGIC MAESTRO DIAGRAMS


Each diagram is independent.

Controls used on other active diagrams will work across all selected diagrams that they are used in











Hands ON

Make advanced logic maestro diagrams

► Use Panel Control Actions ► Use Xpt actions ► Use Xpt triggers ► Use the Latch (flip/flop) ► Make combinational logic using vox action and panel keys or matrix GPI’s from

EHX

► Download map with apply label change


Thank you!

Eclipse EHX System Logic Maestro. Module Objective Introduce Logic Maestro to the user Elements ► What is Logic Maestro ► How does Logic Maestro relate.

Documents

tagged logic maestro

new logic maestro diagrams

logic diagram

transmission logic

logic symbols

logic maestro manager

logic maestro diagram

common diagrams