11 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007 APPENDICIES HOSE ASSEMBLY EQUIPMENT ACCESSORIES & ASSEMBLY INSTRUCTIONS ADAPTERS & TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE LOW & MEDIUM PRESSURE HOSE SPECIALTY & TRUCK HOSE Hose Index Alphabetical Index Part Number Index DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. A/C and Refrigeration Hose 17 AQP Hose 13-14 Hose 20-57 Hydraulic 34-57 AQP 35, 36, 39, 40, 41, 45, 48, 49, 50, 51 AQP/HI-IMPULSE 39, 40, 48, 49 AQP/Hi-Pac 41 BRUISER™ 43, 44, 46, 53, 54, 56 Double wire braid 42-49 Four spiral wire 49-53 Four or six spiral wire 54-56 HI-IMPULSE 38-40, 47-49 Hi-Pac 41 MatchMate BLUE 39, 48 MatchMate ICE 45 MatchMate Plus 39, 47, 48, 51 Single wire braid 38-42 Textile braid 21, 22, 32-37 Wire inserted suction 34, 35 Special application 20-34 Airbrake 21-23 AQP 23-25, 27, 33 Convoluted PTFE 31, 32 Engine and airbrake 23 EPDM 40, 49 Fuel and oil 23-27 Jack Hose 57 LPG 27, 28 Power steering 41 Railroad airbrake 22 Silicone rubber (coolant) 20 Silicone rubber (heater) 20 SOCKETLESS 32-34 PTFE 28-32 Textile braid low pressure 32-34, 35-37 How to order 12 PTFE Hose 18-19 Thermoplastic Hose 15-16 Eaton’s Aeroquip Hose and Fitting Assembly Product Warning Flexible hose lines offer many advantages over rigid tubing including routing ease, vibration absorption, sound deafening and the ability to accommodate movement of connected components. However, hose lines require caution in use not only to provide long service, but also to guard against potentially dangerous failure. Important The user should carefully observe the precautions listed in this catalog, including the recommenda- tions on the selection of hose and fittings on the rel- evant pages, and the pages on fluid compatibility. In addition, care should be taken not to exceed the minimum bend radius listed for each hose size and type in the hose section. Maximum operating pres- sure should not exceed pressures listed in the hose data. Instructions for assembling fittings to differ- ent hose should be fol- lowed carefully to ensure the performance of the completed assembly. WARNING Eaton fitting tolerances are engineered to match Eaton’s Aeroquip hose tolerances. The use of Eaton fittings on hose supplied by other manufac- turers and/or the use of Eaton’s Aeroquip hose with fittings supplied by other manufactures may result in the production of unreliable and unsafe hose assem- blies and is neither recom- mended nor authorized by Eaton Corporation or any of its affiliates or subsidiaries. WARNING Application considera- tions must be observed in selecting appropriate com- ponents for the application of these products con- tained herein. The failure to follow the recommenda- tions set forth in this cata- log may result in an unsta- ble application which may result in serious personal injury or property damage. EATON CORPORATION OR ANY OF ITS AFFILIATES OR SUBSIDIARIES SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGA- TIONS OR LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL CONSE- QUENTIAL, INCIDENTIAL AND CONTINGENT DAM- AGES) ARISING FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND STRICT LIABILITY) OR OTHER THE- ORIES OF LAW WITH RESPECT TO ANY HOSE ASSEMBLIES NOT PRO- DUCED FROM GENUINE AEROQUIP HOSE FIT- TINGS, HOSE AND AERO- QUIP APPROVED EQUIP- MENT, AND IN CONFOR- MANCE WITH EATON’S AEROQUIP PROCESS AND PRODUCT INSTRUCTIONS FOR EACH SPECIFIC HOSE ASSEMBLY. Failure to follow these processes and product instructions and limitations could lead to premature hose assembly failures resulting in property dam- age, serious injury or death. Routing If the user follows the rec- ommendations on hose line routing and installation as provide herein, improved safety and longer service life of any hose installation will result. 302A 26 303 26 1503 26 1531 22 1531A 22 2550 21 2554 21 2556 34 2565 34 2570 21 2575 32 2580 37 2583 37 2651 25 2661 35 2681 38 2766 45 2781 47 2807 28 2808 30 CR170 28 FC194 40 FC195 49 FC234 25 FC252 20 FC254 53 FC273 54 FC273B 54 FC300 27 FC310 41 FC321 27 FC323 50 FC324 50 FC325 51 FC332 33 FC350 23 FC352 20 FC355 23 FC363 31 FC364 31 FC465 29 FC466 35 FC469 30 FC498 36 FC510 41 FC563 32 FC579 57 FC598 36 FC606 56 FC606B 56 FC611 40 FC619 34 FC629 21 FC636 49 FC639 42 FC647 33 FC650 24 FC659 52 FC693 46 FC699 24 FC735 46 FC736 53 FC829 22 FC839B 43 FC849 43 FC849B 44 FC854 53 GH120 45 GH194 39 GH195 48 GH466 55 GH493 51 GH506 55 GH663 39 GH681 42 GH781 47 GH793 48 S-TW 29
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
11EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Flexible hose lines offermany advantages over rigidtubing including routingease, vibration absorption,sound deafening and theability to accommodatemovement of connectedcomponents. However,hose lines require cautionin use not only to providelong service, but also toguard against potentiallydangerous failure.
Important
The user should carefullyobserve the precautionslisted in this catalog, including the recommenda-tions on the selection ofhose and fittings on the rel-evant pages, and the pageson fluid compatibility. Inaddition, care should betaken not to exceed theminimum bend radius listedfor each hose size and typein the hose section.
Maximum operating pres-sure should not exceedpressures listed in the hosedata. Instructions forassembling fittings to differ-ent hose should be fol-lowed carefully to ensurethe performance of thecompleted assembly.
WARNING Eaton fitting tolerances
are engineered to matchEaton’s Aeroquip hose tolerances. The use ofEaton fittings on hose supplied by other manufac-turers and/or the use ofEaton’s Aeroquip hose withfittings supplied by othermanufactures may result inthe production of unreliableand unsafe hose assem-blies and is neither recom-mended nor authorized byEaton Corporation or any ofits affiliates or subsidiaries.
WARNINGApplication considera-
tions must be observed inselecting appropriate com-ponents for the applicationof these products con-tained herein. The failure tofollow the recommenda-tions set forth in this cata-log may result in an unsta-ble application which mayresult in serious personalinjury or property damage.
EATON CORPORATION ORANY OF ITS AFFILIATESOR SUBSIDIARIES SHALLNOT BE SUBJECT TO ANDDISCLAIMS ANY OBLIGA-TIONS OR LIABILITIES(INCLUDING BUT NOTLIMITED TO ALL CONSE-QUENTIAL, INCIDENTIALAND CONTINGENT DAM-AGES) ARISING FROMTORT CLAIMS (INCLUDINGWITHOUT LIMITATIONNEGLIGENCE AND STRICTLIABILITY) OR OTHER THE-ORIES OF LAW WITHRESPECT TO ANY HOSEASSEMBLIES NOT PRO-
DUCED FROM GENUINEAEROQUIP HOSE FIT-TINGS, HOSE AND AERO-QUIP APPROVED EQUIP-MENT, AND IN CONFOR-MANCE WITH EATON’SAEROQUIP PROCESS ANDPRODUCT INSTRUCTIONSFOR EACH SPECIFIC HOSEASSEMBLY.
Failure to follow theseprocesses and productinstructions and limitationscould lead to prematurehose assembly failuresresulting in property dam-age, serious injury or death.
Routing
If the user follows the rec-ommendations on hose linerouting and installation asprovide herein, improvedsafety and longer servicelife of any hose installationwill result.
12 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
Accurate processing andprompt delivery of yourorder depends on easyidentification of yourrequirements. Please order Aeroquip brand partsusing correct part numbersas described in this catalog.Inquiries and orders shouldbe directed to yourAeroquip Distributor or:
Eaton Corporation14615 Lone Oak RoadEden Prairie, MN 55344USA952/937-9800; Fax: 952/974-7722www.hydraulics.eaton.com
Part numbers and dash sizes
Dash size designates thenominal size in 16ths of aninch. This number immedi-ately follows the part num-ber and is separated from itwith a dash.
Dimensions
Dimensions given in thiscatalog for Aeroquip prod-ucts are approximate andshould be used for refer-ence only. Exact dimension-al information for a givenproduct is subject to changeand varying tolerances; con-tact Eaton directly for fullcurrent information.
WARNING
Hose assemblies
Eaton manufactures the terminal ends of our hose fittings to the appropriaterequirements established by the SAE. Therefore, theperformance ratings ofthese hose fittings meetthe SAE requirements. It ispossible to order a hoseassembly with a fitting ter-minal end that has a per-formance rating lower thanthe hose rating. Whenordering hose assemblies,please keep the connectingend performance rating inmind since this may affectoverall hose assembly per-formance.
Hose assembly compo-nents (hose and fittings) are easily assembled in thefield. However, factory assembled reusable andcrimped hose assembliesare available.
For complete information,contact Eaton.
Cut length hose
Cut lengths of hose should be ordered as shown below byspecifying lengths in inches.
For numeric part numbers: 2651- 10- 00484
Hose type
Hose size (in 16ths of an inch)
Cut length (in inches)last digit is in 1/8ths of an inch 00484 = 481/2 inches
For alpha-numeric part numbers: FC300- 08- 00484
Hose type
Hose dash size
Cut length (in inches)
last digit is in 1/8ths of an inch 00484 = 481/2 inches
Bulk hose
Bulk hose should be ordered by specifying length in feet asshown below.
Complete number 500 ft.- 2651- 10
Quantity (in feet)
Hose type
Hose size (in 16ths of an inch)
Note: Length tolerance for hose, assemblies and sleeves is:
Up to and including 12 inches: ±1/8"
Above 12 inches to and including 18 inches: ±3/16"
Above 18 inches to and including 36 inches: ±1/4"
Above 36 inches: ±1% of length
How to Order
13EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
The superior high-tempera-ture, abrasion- resistanthose. Features extensivefluid compatibility.
Refer to Synflex Catalog E-HOOV-MC001-E for more information on Thermoplastic hose.
3R30 Low Pressure Hose
SAE100R3 Performance Specifications
3130 Medium Pressure Hose
SAE100R7 Specifications
SAE100R1 & R7 Performance Specifications
3580 Medium Pressure Hose
SAE 100R18 Specifications
30CT Constant Pressure Hose
3R80 High Pressure Hose
SAE 100R8 Specifications
3E80 Non-Conductive High Pressure Hose
SAE100R8 Specifications
16 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
• Compact size
• Low elongation
• Designed for permanenthigh pressure fittingswith hose guards
• Lightweight
Operating temperaturerange of -40°C to +66°C [-40°F to +150°F].
• SAE J517 non-conductivehose construction. Lessthan 50 micro-amperesleakage when subjected to75,000 volts/ft for 5 minutes
• Compact size• Low elongation
• UV resistant cover• Designed for permanent
high pressure fittingswith hose guards
Operating temperaturerange of -40°C to +66°C [-40°F to +150°F].
• High moisture barrier core tube
• No plasticizers in the core tube
• UV resistant cover• Custom colors available
Operating temperaturerange of -23°C to +66°C [-10°F to 150°F].
3630 General Purpose Air and Water Hose
• Higher pressures than3440 Moisture Lok series
• High moisture barriercore tube
• High chemical compatibili-ty core tube
• UV resistant cover• Custom colors available
Operating temperaturerange of -40°C to +100°C [-40°F to 212°F].
34CU High Pressure Transfer Hose
3V10 Very High Pressure Hose
3VE0 Non-Conductive Very High Pressure Hose
• Standard bold colors:gray, red, blue, yellow orblack
• Excellent abrasion andimpact resistance
• Lightweight
• 4:1 Burst to workingpressure safety factor
• Long life over rubberhose
Operating temperaturerange of -23°C to +66°C [-10°F to 150°F].
3440 Moisture-Lok Hose
Kynar® Core Tube
Refer to Synflex Catalog E-HOOV-MC001-E for more information on Thermoplastic hose.
17EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
Hose constructed ofpolymide veneer tube, withpolyester reinforcement andchlorobutyl cover.Temperature range is -40˚C to +135˚C [-40˚F to +275˚F]. Fittingselection includes factorycrimp and the E-Z Clip lineof A/C connections.
For more information, refer to catalog A-HOAC-MC001-E1.
GH134 Multi-Refrigerant A/C and Refrigeration Hose
A/C and Refrigeration Hose
Hose constructed ofpolymide veneer tube, with synthetic rubber cover.Designed to work with100R5 reusable fittings.Temperature range is -40˚C to +121˚C [-40˚F to +250˚F].
For more information, refer to catalog A-HOAC-MC001-E1.
FC802 Multi-Refrigerant A/C and Refrigeration Hose
SAE-J2064, Type E construction.
Flexible hose is constructedof a corrugated polymidetube for exceptional flexibili-ty in large bus applications.This is a factory crimp prod-uct. Please contact Eaton foradditional information toqualify for field crimp of the
FC555 hose. Temperaturerange is -40˚C to +125˚C [-40˚F to +257˚F].
For more information, refer to catalog A-HOAC-MC001-E1.
FC555 Multi-Refrigerant A/C and Refrigeration Hose
Temperature range is -40˚C to +135˚C [-40˚F to +275˚F].
For more information, refer to catalog A-HOAC-MC001-E1.
FC505 Low Effusion, Multi-Refrigerant A/C and Refrigeration Hose
Butyl tube and polyesterbraid, abraision-resistantcover. Designed to workwith 100R5 reusable fit-tings. Temperature range is40˚C to +121˚C [-40˚F to +250˚F].
For more information, refer to catalog A-HOAC-MC001-E1.
FC558 R134a A/C and Refrigeration Hose
Meets SAE J2064 with 100R5 reusable fittings, sizes 10 to 24.
Meets SAE-J2064.
Exceeds SAE-J2064, Type E.
Refer to A/C and Refrigeration Catalog A-HOAC-MC001-E1 for more information on A/C and Refrigferation hose.
18 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
Everflex S Series tube isreinforced with 304 stain-less steel wire. All sizeshave a minimum of .040”thick extruded virgin PTFE.That is 33% more PTFEthan most other manufac-turers offer. The additional
PTFE results in improvedbend radius, kink resist-ance and slows permeationof gases. Temperaturerange is -54˚C to +230˚C [-65˚F to +450˚F].
For more information, referto catalog E-HOEV-MC001-E.
Smooth Bore “S” Series Hose
PTFE Hose
Everflex B Series is rein-forced with bronze wire. Allsizes have a minimum of0.040” thick extended vir-gin PTFE. Everflex B Serieshose has traditionally beenused in high vibration envi-
ronments. Temperaturerange is -54˚C to +204˚C [-65˚F to +400˚F].
For more information, referto catalog E-HOEV-MC001-E.
Smooth Bore “B” Series Hose
Everflex STW Series tube isreinforced with 304 stain-less steel wire. STW hoseis available as an alternativewhere competitors’ thinwall products are specifiedand S Series hose can notbe substituted. Radius ininches to inside bend.
Multiply bend radius by 1.25for dynamic applications. Temperature range is -54˚C to +230˚C [-65˚F to +450˚F].
For more information, referto catalog E-HOEV-MC001-E.
Smooth Bore “STW” Series Hose
S-3 with a PVC cover is aPTFE hose which can beused for DOT 571.106hydraulic brake line applica-tions. PVC cover is on theexterior in 0.020” thickness.The PVC cover is useful toprotect motorcycle paint
jobs or provide durability inan abrasive environment.Temperature range is -40˚Cto +93˚C [-40˚F to +200˚F].
For more information, referto catalog E-HOEV-MC001-E.
Smooth Bore “S-3” Series Hose
SC Series hose is identicalto the S series with oneexception. SC hose has aninternal conductive staticdissipating liner that pro-vides a path to the hoseend fittings for applicationswhere flow induced electro-static charges can occur.
Radius in inches to insidebend. Multiply bend radius by1.25 for dynamic applications.Temperature range is -54˚Cto +230˚C [-65˚F to +450˚F].
For more information, referto catalog E-HOEV-MC001-E.
Smooth Bore “SC” Series Hose
Refer to Everflex Catalog E-HOEV-MC001-E for more information on PTFE hose.
19EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
SCTW Series hose is identi-cal to the STW Series withone exception. SCTW hosehas an internal conductivestatic dissipating liner thatprovides a path to the hoseend fittings for applicationswhere flow induced electro-
static charges can occur.Radius in inches to insidebend. Multiply bend radius by1.25 for dynamic applications.Temperature range is -54˚Cto +204˚C [-65˚F to +400˚F].
For more information, referto catalog E-HOEV-MC001-E.
Smooth Bore “SCTW” Series Hose
Hi-PSI Series hose is a heavywall PTFE hose for very highpressure applications. Thereinforcement is braided andnot spiraled allowing for bet-ter hose flexibility.
Temperature range is -54˚Cto +204˚C [-65˚F to +400˚F].
For more information, referto catalog E-HOEV-MC001-E.
20 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC252Silicone rubber (heater)
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC252-06 9,7 0.38 18,3 0.72 3,5 50 14,0 200 38,1 1.50 0,22 0.15FC252-08 12,7 0.50 20,6 0.81 3,5 50 14,0 200 50,8 2.00 0,27 0.18FC252-10 16,0 0.63 23,9 0.94 2,8 40 11,0 160 63,5 2.50 0,28 0.19FC252-12 19,1 0.75 26,9 1.06 2,8 40 11,0 160 76,2 3.00 0,41 0.28FC252-16 25,4 1.00 34,0 1.34 2,5 35 10,0 140 101,6 4.00 0,53 0.36
ConstructionSilicone rubber tube, braidedfiber reinforcement and siliconerubber cover.
Operating Temperature Range–54°C to +177°C [–65°F to +350°F]
ApplicationHeater hose for passenger carsand trucks; connecting lines fromhot water heaters to coolant-cir-culating systems. For more infor-mation on specific fluid applica-tions and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
FC352Silicone rubber (coolant)
Maximum MinimumOperating Burst Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure of Hose
ConstructionSilicone rubber tube, four spiralsof nylon and silicone rubbercover.
Operating Temperature Range–54°C to +177°C [–65°F to +350°F]
ApplicationCoolant system service with liq-uid-cooled engines. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageReusable
Clamp 184
Fitting Reference PageReusable
Clamp 184
21EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
2550/2554AirbrakeSAE J1402 FMVSS106
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft2550-6 9,7 0.38 19,1 0.75 16,0 225 62,0 900 44,5 1.75 0,30 0.202554-6 9,7 0.38 19,1 0.75 16,0 225 62,0 900 95,3 3.75 0,27 0.18
ConstructionSynthetic rubber tube, doubletextile braids and synthetic rubber cover.
Operating Temperature Range2550: –40°C to +93°C
[–40°F to +200°F],
2554: –54°C to +100°C [–65°F to +212°F]
ApplicationTractor to trailer lines, axle cham-ber lines and tractor servicelines. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
2554 Conforms to ordinancespec. MIL-H-3992B,Type 1, Class 1.
For Complete Agency ListingsSee pages 346-348.
2570SAE J1402 FMVSS106
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in. mm in. bar psi bar psi mm in. Kg/m lbs/ft2570-6 9,7 0.38 19,1 0.75 16,0 225 62,0 900 44,5 1.75 0,27 0.182570-8 12,7 0.50 22,4 0.88 16,0 225 62,0 900 50,8 2.00 0,34 0.232570-10‡ 15,7 0.62 26,9 1.06 16,0 225 62,0 900 57,2 2.25 0,44 0.30
ConstructionSynthetic rubber tube, doubletextile braid and synthetic rubbercover.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationTractor to trailer lines, axle cham-ber lines and tractor servicelines. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
‡ Crimp Fittings only, contact Eaton Aeroquip.
FC629SAE J1402 FMVSS106
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in. mm in. bar psi bar psi mm in. Kg/m lbs/ftFC629-06 9,7 0.38 19,8 0.78 15,0 225 62,0 900 44,5 1.75 0,27 0.18FC629-08 12,7 0.50 23,1 0.91 15,0 225 62,0 900 50,8 2.00 0,30 0.20
ConstructionSynthetic rubber tube, singlepolyester braid and synthetic rubber cover.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationTractor to trailer lines, axle chamber lines and tractor servicelines. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
Factory crimp fittings available.Contact Eaton for details.
22 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC829AirbrakeSAE J1402 FMVSS106
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in. mm in. bar psi bar psi mm in. Kg/m lbs/ftFC829-08 12,7 0.50 23,1 0.91 15 225 62 900 76,2 3.00 0,27 0.18
ConstructionEPDM rubber tube, double tex-tile braids and EPDM rubbercover.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationTractor to trailer lines, axle cham-ber lines and tractor servicelines. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
1531/1531ARailroad AirbrakeExceeds AAR-M618
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in. mm in. bar psi bar psi mm in. Kg/m lbs/ft1531-10‡ 12,7 0.50 23,9 0.94 21,0 300 84,0 1200 139,7 5.50 0,57 0.381531-12 16,0 0.63 28,4 1.12 21,0 300 84,0 1200 165,1 6.50 0,71 0.481531-16‡ 22,4 0.88 35,1 1.38 21,0 300 84,0 1200 187,5 7.38 1,07 0.721531-20 28,7 1.13 41,4 1.63 21,0 300 84,0 1200 241,3 9.50 1,16 0.781531A-24‡ 35,1 1.38 47,8 1.88 21,0 300 84,0 1200 266,7 10.50 1,55 1.04
ConstructionSynthetic rubber tube, partial tex-tile braid, wire reinforcement(1531-10 and 1531-12 have singlewire braid; 1531-16, 1531-20 and1531A-24 have double wirebraid) and synthetic rubber cover.
Operating Temperature Range–54°C to +100°C [–65°F to +212°F]
ApplicationLocomotive airbrake lines. For more information on specificfluid applications and high temperature ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Factory crimp fittings available.Contact Eaton for details.
Fitting Reference PageReusable
Fitting 185Socket Data 65
‡ Crimp fittings also availablefor these sizes. ContactEaton for information.
23EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
FC355 AQPEngine & AirbrakeFMVSS106
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionAQP elastomer tube, polyesterinner braid and a single wirebraid reinforcement, blue AQPelastomer cover.
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
Air not to exceed 250 psi or+121°C [+250°F].
ApplicationAir, gasoline, fuel, lubricating oilsand coolants. For more informa-tion on specific fluid applicationsand high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
FC350 AQPEngine & AirbrakeFMVSS106
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionAQP elastomer tube, polyesterinner braid and a single wirebraid reinforcement; black poly-ester textile braided cover.
Operating Temperature Range–49°C to +150°C [–55°F to +302°F]
Air not to exceed +121°C[+250°F].
ApplicationAir, gasoline, fuel lubricating oilsand coolants. For more informa-tion on specific fluid applicationsand high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
100R5 134Reusable
Fitting 136Socket Data 65
Fitting Reference PageCrimp
100R5 134Reusable
Fitting 136Socket Data 65
24 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC650 AQPHigh temperature fuel & oil
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionAQP elastomer tube, single wirebraid reinforcement, black poly-ester braided cover.
Operating Temperature Range–49°C to +150°C [–55°F to +302°F]
Air not to exceed +121°C[+250°F].
ApplicationDiesel fuel, gasoline, lubricatingoils, water, coolant and air. Notapproved for airbrake applica-tions. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
FC699 AQPHigh temperature fuelAQP lightweight engine hose
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
Operating Temperature Range–40°C to +150°C [–40°F to +302°F].
Air not to exceed 250 psi or+121°C [+250°F].
ApplicationDiesel fuel, gasoline, crude andlubricating oils. For more informa-tion on specific fluid applicationsand high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Factory crimp fittings available.Contact Eaton for details.
Fitting Reference PageCrimp
OTC 66
25EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
FC234 AQPHigh temperature fuel and oilFire resistant USCG/MMT, NMMA/BIA
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationDiesel fuel, gasoline, hot lube oiland water. For more informationon specific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
2651Single wire braidSAE 100R5 performance
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulics, gasoline, fuel andlubricating oils, air and water. Airnot to exceed 250 psi or +71°C[+160°F]. For more informationon specific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.†Maximum negative pressuresshown for -16 and larger are suit-able for hose which has sufferedno external damage or kinking. Ifgreater negative pressures arerequired for -16 and larger hoses,the use of an internal support coilis recommended.
r
r
Fitting Reference PageCrimp
100R5 134Reusable
Fitting 136Socket Data 65
Fitting Reference PageReusable
Fitting 136Socket Data 65
26 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
303/302ASingle wire braidMIL-DTL-8794
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionSynthetic rubber tube, textile innerbraid, single wire braid reinforce-ment and black textile braid cover.
Operating Temperature Range303 hose: –54°C to +121°C
[65°F to +250°F]
302A hose: –40°C to +121°C [–40°F to +250°F]
ApplicationHydraulics, air, gasoline, fuel andlubricating oils. Air not to exceed+71°C [+160°F]. For more infor-mation on specific fluid applica-tions and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
1503Single wire braidSAE 100R5
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionSynthetic rubber tube, textile innerbraid, single wire braid reinforce-ment and black textile braid cover.
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
Air not to exceed +71°C ([+160°F].
ApplicationHydraulics, air, gasoline, fuel andlubricating oils. For more informa-tion on specific fluid applicationsand high temperature ratings, seepages 349-355.
†Maximum negative pressuresshown for -16 and larger are suit-able only for those which has suf-fered no external damage or kink-ing. If greater negative pressuresare required for -16 and largerhoses, the use of an internal support coil is recommended.For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageReusable
Fitting 136Socket Data 65
Fitting Reference PageCrimp
100R5 134Reusable
Fitting 136Socket Data 65
27EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
FC300 AQPSingle wire braidExceeds SAE 100R5
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionAQP elastomer tube, polyesterinner braid, single wire braid rein-forcement and blue polyesterbraid cover.
Operating Temperature Range–49°C to +150°C [–55°F to +302°F]
Air not to exceed +121°C [+250°F].
ApplicationHydraulics handling petroleumbase fluids and air, gasoline, fueland lubricating oils, fire resistanthydraulic fluids and other indus-trial fluids. For more informationon specific fluid applications andhigh temperature ratings, see pages 349-355.
†Maximum negative pressureshown for -16 and larger are suit-able for those which has sufferedno external damage or kinking. Ifgreater negative pressures arerequired for -16 and larger hoses,the use of an internal support coilis recommended. ‡ Does not meet SAE 100R5pressure with reusable fittings. -32 size rated to 350 psi withcrimp fittings.
For Complete Agency ListingsSee pages 346-348.
FC321LPG UL listing MH6044
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
ConstructionSynthetic rubber tube, a textileinner braid, a stainless steel wirebraid reinforcement and a syn-thetic rubber impregnated textilebraid cover.
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationDesigned for butane-propaneapplications on either mobile orstationary equipment. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
WARNING: LPG is a very haz-ardous liquid or gas and should behandled with maximum care toprevent leakage. Since the gas isheavier than air, it may flow alongthe ground if it escapes and causean explosion or a fire. No leakageshould ever be tolerated.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
100R5 134Reusable
Fitting 136Socket Data 65
Fitting Reference PageReusable
Fitting 136Socket Data 65
28 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
CR170LPGSingle stainless steel braid CGA (Canadian Gas Association) Type III
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftCR170-04 4,8 0.19 13,2 0.52 24,0 350 840,0 12000 76,2 3.00 0,24 0.16CR170-06 7,9 0.31 17,0 0.67 24,0 350 630,0 9000 101,6 4.00 0,32 0.22CR170-08 10,4 0.41 19,6 0.77 24,0 350 560,0 8000 117,3 4.62 0,38 0.26CR170-12 15,9 0.63 28,0 1.10 24,0 350 414,0 6000 165,1 6.50 0,71 0.48
ConstructionNylon tube, single stainless steelbraid reinforcement, perforatedsynthetic rubber cover.
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationLPG (propane) vehicle, alterna-tive fuel conversion systems. Formore information on specificfluid applications and high tem-perature ratings, see pages 349-355.
WARNING: LPG is a very haz-ardous liquid or gas and should behandled with maximum care toprevent leakage. Since the gas isheavier than air, it may flow alongthe ground if it escapes and causean explosion or a fire. No leakageshould ever be tolerated.
For Complete Agency ListingsSee pages 346-348.
NOTE: Must be CGA certified tocrimp assemblies.
r
2807PTFE SAE 100R14A
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionExtruded PTFE tube with stain-less steel single wire braid.
Operating Temperature Range–73°C to +260°C [–100°F to +500°F]
ApplicationHot air, steam, compressor dis-charge and most chemical appli-cations. Not recommended forsteam-cold water cycling. Formore information on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
† Steam 200 psi at +388°F max.Engineering information is avail-able for specific critical tempera-ture requirements. Contact Eaton.
‡Maximum negative pressure for -06 and larger are suitable for hosewhich has suffered no externaldamage or kinking. If greater neg-ative pressures are required for -06 and larger hoses, the use of aninternal support coil is recom-mended. Use of an internal sup-port coil in -06 and larger PTFEhose is recommended for tubesupport where extended or con-tinuous service at high tempera-ture together with low or negativepressure is expected.For Complete Agency ListingsSee pages 346-348.
r
Factory crimp fittings available.Contact Eaton for details.
Fitting Reference PageCrimp
Fitting 129Socket Data 64
Reusable Fitting 186Socket Data 65
29EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
S-TW SeriesSmooth BoreMeets SAE 100R14A
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionExtruded PTFE tube with stain-less steel single wire braid.
Operating Temperature Range–54°C to +230°C [–65°F to +450°F]
ApplicationHot air, steam, compressor dis-charge and most chemical appli-cations. Not recommended forsteam-cold water cycling. Formore information on specific fluidapplications and high temperatureratings, see pages 349-355.
‡ Maximum negative pressure for-16 and larger are suitable forhose which has sufferend noexternal damage or kinking. Ifgreater negative pressures arerequired for -16 and larger hoses,the use of an internal support coilis recommended. Use of an inter-nal support coil in -06 and largerPTFE hose is recommended fortube support where extended orcontinuous service at high tem-perature together with low or neg-ative pressure is expected.For Complete Agency ListingsSee pages 346-348.
* See Everflex catalog E-HOEV-MC001-E for additionalhose sizes and fitting options.
FC465PTFE Conductive SAE 100R14BFDA Compliant per 21CFR178.3297
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionConductive extruded black PTFEtube with stainless steel singlewire braid.
Operating Temperature Range–73°C to +260°C [–100°F to +500°F]
ApplicationSteam, compressor discharge andmost chemical applications. Notrecommended for steam-coldwater cycling. For more informa-tion on specific fluid applicationsand high temperature ratings, seepages 349-355.
†Steam 200 psi at +388°F max.Engineering information is availablefor specific critical temperaturerequirements. Contact Eaton.
‡Maximum negative pressure for -06 and larger are suitable for hosewhich has suffered no externaldamage or kinking. If greater nega-tive pressures are required for -06and larger hoses, the use of aninternal support coil is recommend-ed. Use of an internal support coilin -06 and larger PTFE hose is rec-ommended for tube support whereextended or continuous service athigh temperature together with lowor negative pressure is expected.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
Fitting 129Socket Data 64
Reusable Fitting 186Socket Data 65
Fitting Reference PageCrimp
Fitting 129Socket Data 64
Reusable Fitting 186Socket Data 65
30 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
2808PTFE
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionExtruded PTFE tube with doublestainless steel braids.
Operating Temperature Range–73°C to +260°C [–100°F to +500°F]
ApplicationHot air, steam and most chemi-cal applications. Not recom-mended for steam-cold watercycling. For more information onspecific fluid applications andhigh temperatre ratings, seepages 400-404.† Steam 200 psi at +388°F max.Engineering information is avail-able for specific critical tempera-ture requirements. Contact Eaton.
‡Maximum negative pressure for -08 and larger are suitable for hosewhich has suffered no externaldamage or kinking. If greater neg-ative pressures are required for -08 and larger hoses, the use of aninternal support coil is recom-mended. Use of an internal sup-port coil in -08 and larger PTFEhose is recommended for tubesupport where extended or con-tinuous service at high tempera-ture together with low or negativepressure is expected.For Complete Agency ListingsSee pages 397-398.
r
FC469PTFE Conductive
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
mm in. mm in. bar psi bar psi mm in. kPa in/Hg Kg/m lbs/ftFC469-06 7,6 0.30 12,2 0.48 280,0 4000 1120,0 16000 63,5 2.50 94,8‡ 28‡ 0,25 0.17FC469-08 9,9 0.39 15,5 0.61 280,0 4000 1120,0 16000 73,2 2.88 94,8‡ 28‡ 0,36 0.24FC469-10 12,4 0.49 18,3 0.72 245,0 3500 980,0 14000 82,6 3.25 94,8‡ 28‡ 0,43 0.29
ConstructionConductive extruded PTFE tubewith stainless steel single wirebraid.
Operating Temperature Range–54°C to +204°C [–65°F to +400°F]
ApplicationHigh pressure chemical and fluidtransfer. For information on spe-cific fluid applications and high temperature ratings, see pages400-404.
† Steam 200 psi at +388°F max.Engineering information is avail-able for specific critical tempera-ture requirements. Contact Eaton.
‡Use of an internal support coil in-06 and larger PTFE hose is rec-ommended for tube supportwhere extended or continuousservice at high temperaturetogether with low or negativepressure is expected.
For Complete Agency ListingsSee pages 397-398.
r
Fitting Reference PageReusable
Fitting 189Socket Data 65
Contact Eaton for fitting information.
31EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
FC363Convoluted PTFENonconductive tube
Maximum Minimum Minimum MinimumOperating Burst Bend Kink Vacuum
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Radius Service
ConstructionConvoluted PTFE tube withstainless steel single wire braidcover.
Operating Temperature Range–54°C to +204°C [–65°F to +400°F]
ApplicationChemical, food, water and wastehandling, and various transferapplications. Not recommendedfor steam-cold water cycling orair. For more information on specific fluid applications and high temperature ratings, seepages 349-355.
†Steam 200 psi at +388°F max. Engineering information is available for specific critical temperature requirements.Contact Eaton.
For Complete Agency ListingsSee pages 346-348.
FC364Convoluted PTFE Conductive tube
Maximum Minimum Minimum MinimumOperating Burst Bend Kink Vacuum
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Radius Service
ConstructionConvoluted conductive PTFEtube with stainless steel wirebraid cover.
Operating Temperature Range–54°C to +204°C [–65°F to +400°F]
Application Steam lines and fuel transferapplications where static dissipation is required. Not recommended for steam-coldwater cycling or air. For moreinformation on specific fluid applications and high temperatureratings, see pages 349-355.
†Steam 200 psi at +388°F max.Engineering information is available for specific critical temperature requirements.Contact Eaton.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
Fitting 131Socket Data 64OTC* 66
* Applications under 250 psi (sizes -10thru -24) not recommended for air appli-cations.
Fitting Reference PageCrimp
Fitting 131Socket Data 64OTC* 66
* Applications under 250 psi (sizes -10thru -24) not recommended for air appli-cations.
32 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
2575Low pressure SOCKETLESS™Textile Braid
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft2575-4 6,4 0.25 11,9 0.47 17,0 250 70,0 1000 76,2 3.00 0,13 0.092575-6 9,7 0.38 15,8 0.62 17,0 250 70,0 1000 101,6 4.00 0,19 0.132575-8 12,7 0.50 19,1 0.75 17,0 250 70,0 1000 127,0 5.00 0,25 0.172575-10 16,0 0.63 23,1 0.91 14,0 200 56,0 800 152,4 6.00 0,30 0.202575-12 19,1 0.75 26,2 1.03 14,0 200 56,0 800 177,8 7.00 0,33 0.22
ConstructionSynthetic rubber tube, textile braidreinforcement, black syntheticrubber cover (only).
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
Water not to exceed +66°C[+150°F] and air not to exceed+71°C [+160°F].
ApplicationFor gasoline, fuel and lubricatingoils, air and water. Not recom-mended for hydraulic impulseapplications and not approved forairbrake applications. For moreinformation on specific fluid appli-cations and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageReusable
Fitting 176
FC563Convoluted PTFENonconductive tube
Maximum Minimum MinimumOperating Burst Bend Vacuum
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service
ConstructionConvoluted PTFE tube with stain-less steel single wire braid rein-forcement and integral black poly-ester overbraid cover.
Operating Temperature Range–54°C to +150°C [–65°F to +300°F]
ApplicationChemical transfer and variouschemical processing applications.Not recommended for steam orsteam-cold water cycling. Formore information on specific fluidapplications and high temperatureratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
Fitting 131Socket Data 64
Factory crimp only.
33EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
Air not to exceed +121°C[+250°F] and water not toexceed +82°C [+180°F].
ApplicationFor gasoline, fuel and lubricatingoils, air and water. Not recom-mended for hydraulic impulseapplications and not approved forairbrake applications. For moreinformation on specific fluidapplications and high temperature ratings, see pages349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageReusable
Fitting 176
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
Water not to exceed +66°C(+150°F), air not to exceed +74°C (+165°F).
ApplicationFor gasoline, fuel and lubricatingoils, air and water. Not recom-mended for hydraulic impulseapplications and not approved forairbrake applications. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
*NOTE: You must insert the cor-rect color code in the completepart number. Color codes areBLK = black, BLU = blue, BRN = brown, GRN = green,WHT = white. Example: FC647-04GRN is a green cover in dash size 4.Not all sizes are available in all colors.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageReusable
Fitting 176
34 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
ConstructionSynthetic rubber tube, reinforce-ment consisting of a helical wirebetween two textile reinforce-ment layers and synthetic rubbercover.
Operating Temperature Range–40°C to +135°C [–40°F to +275°F]
ApplicationSuction and transfer applicationsfor petroleum hydraulic fluids,fuel, lubricating oils, gasoline,water and many other industrialfluids. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
† Maximum working pressure forband clamp type fittings is 3,4 bar[50 psi].
NOTE: -40 and -48 sizes requirespecial tooling for crimp fittings.Contact Eaton for information.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
OTC 66TTC 66-40, -48 133Socket Data 64
Reusable Nipple 66Clamps 184
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
2556: -40°C to +100°C [-40°F to+212°F]. Water not to exceed+66°C [+150°F], air not to exceed+160°C [+71°F].
2565: -54°C to +121°C [-65°F to+250°F]. Water not to exceed+66°C [+150°F], air not to exceed+74°C [+165°F].
ApplicationFor gasoline, fuel and lubricatingoils, air and water. Not recom-mended for hydraulic impulseapplications and not approved forairbrake applications. For moreinformation on specific fluid appli-cations and high temperature rat-ings, see pages 349-355.
2565 is a low-temperature syn-thetic rubber covered MIL-DTL-13444 Type 1, Class A hose.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageReusable
Fitting 176
35EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
2661 AQPWire inserted suctionExceeds SAE 100R4
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionAQP elastomer tube, reinforce-ment consisting of a helical wirebetween two textile braids andblue AQP elastomer cover.
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationSuction and transfer applicationsfor petroleum and fire resistanthydraulic fluids, fuel, lubricatingoils, gasoline, water and manyother industrial fluids. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
† Maximum working pressure forband clamp type fittings is 3,4 bar[50 psi].
‡Sold as bulk hose only.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
OTC 66TTC 66-40, -48 133Socket Data 64
Reusable Nipple 66Clamps 184
FC466Textile braidExceeds SAE 100R6 performance*
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionSynthetic rubber tube, textilebraid reinforcement and poly-ester braid cover.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F],Air not to exceed +71°C [+160°F].
ApplicationFor gasoline, fuel, lubricating oils,air and water. Not approved forairbrake applications. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
* All sizes except –12
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
OTC 66Skive Nipple** 66Socket Data 64
**No skiving required.
36 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionAQP elastomer tube, textile braidreinforcement, black AQP elas-tomer cover.
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationLow pressure return lines inhydraulic systems. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
FC598 AQPTextile braidExceeds SAE 100R6
Fitting Reference PageCrimp
OTC 66Skive Nipple** 66Socket Data 64
**No skiving required.
FC498 AQPTextile braidExceeds SAE 100R6
Maximum Minimum MinimumOperating Burst Bend Vacuum Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius Service of Hose
ConstructionAQP elastomer tube, textile braidreinforcement, blue AQP elas-tomer cover.
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationLow pressure return lines inhydraulic systems. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
OTC 66Skive Nipple** 66Socket Data 64
**No skiving required.
37EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
2580Double textile braidMIL-H-24136/3
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]. Air not to exceed +71°C [+161°F].
ApplicationFor hydraulics, fuel, lubricatingoils, gasoline, air and water. Notapproved for airbrake applica-tions. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
OTC 66
38 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
2681HI-IMPULSE®
Single wire braidMeets or exceeds: SAE 100R1A, EN853 1ST, ISO 1436-1 Type 1ST
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore information on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
Skive Nipple 66Socket Data 64
39EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
GH663 MATCHMATE Plus HI-IMPULSESingle wire braidMeets or exceeds: SAE 100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft227,0 3250† 897,0 13000†
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore information on specific fluidapplications and high temperatureratings, see pages 349-355.
† Improved performance when usedwith Global Crimp fittings.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
Reusable Fitting 148Socket Data 65
GH194 AQPMATCHMATE BLUEHI-IMPULSESingle wire braidMeets or exceeds: SAE 100R1AT Type S, EN853 1SN, ISO 1436-1 Type 1SN
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–40°C to +150°C [–40°F to +300°F].
ApplicationPetroleum and fire-resistanthydraulic fluids, fuel and lubricat-ing oils, gasoline, water andother industrial fluids. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
40 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC611EPDM hoseSingle wire braid
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–40°C to +75°C [–40°F to +175°F]
ApplicationGround support equipment(GSE), industrial phosphate ester-based fluids, water glycol sys-tems. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
TTC 66
FC194 AQPHI-IMPULSESingle wire braidMeets or exceeds: SAE 100R1A, EN853 1ST, ISO 1436-1 Type 1ST
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
ConstructionAQP elastomer tube, single wirebraid reinforcement and blueAQP elastomer cover.
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationPetroleum and fire-resistanthydraulic fluids, fuel, lubricatingoils, gasoline, water, and otherindustrial fluids. For more infor-mation on specific fluid applica-tions and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
Skive Nipple 66Socket Data 64
41EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
FC310Hi-Pac wire braidSAE 100R16 performance
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft50,8 2.00†
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore specific information on fluidapplications, see pages 349-355.
† Improved minimum bend radiuswhen used with global fittings.
For Complete Agency ListingsSee pages 346-348.
FC510 AQPHi-Pac wire braid
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationPetroleum and fire-resistanthydraulic fluids, fuel, and lubricat-ing systems. For more informa-tion on specific fluid applicationsand high temperature ratings,see pages 346-348.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
Reusable Fitting 151Socket Data 65
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
Reusable Fitting 151Socket Data 65
42 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
ConstructionSynthetic rubber tube with oneor two wire braid reinforce-ments, ozone flexible neoprenerubber cover.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationGeneral industrial and hydraulicsystem service with petroleumand water-base fluids.Recommended for high-pressureoil lines used on constructionequipment and other off-highwayapplications. For more informa-tion on specific fluid applicationsand high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
**Two braids of high tensile wire.
GH6813000 PSI Constant pressureSingle wire braidExceeds EN 853 Type 1
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftGH681-4 6,4 0.25 11,9 0.47 225,0 3250 900,0 13050 50,8 2.00 0,16 0.11GH681-6 9,7 0.38 16,0 0.63 210,0 3000 840,0 12000 63,5 2.50 0,28 0.18GH681-8 12,7 0.50 19,8 0.78 210,0 3000 840,0 12000 88,9 3.50 0,39 0.26
ConstructionSynthetic rubber tube, singlewire braid reinforcement andsynthetic rubber cover. Meets orexceeds EN requirements at 1/2SAE Bend Radius.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore information on specific fluidapplications and high temperatureratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
Fitting Reference PageCrimp
TTC (-6 only) 66Skive Nipple 66Socket Data 64
43EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
ConstructionSynthetic rubber tube with oneor two layers of braided wirereinforcement, synthetic rubberintermediate cover and BRUISERouter cover.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHigh abrasion industrial andhydraulic system applicationswith petroleum and water-basedfluids. Recommended for use oncritcal applications in construc-tion, forestry, and other off-high-way vehicles. BRUISER outercover offers unmatched abrasion,chemical, and environmental pro-tection. For more information onspecific fluid applications andtemperature ratings, see pages349-355.
For Complete Agency ListingsSee pages 346-348.
**Two braids of high tensile wire.
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC849-04 6,4 0.25 15,2 0.60 280,0 4000 1120,0 16000 50,8 2.00 0,36 0.24FC849-06 9,7 0.38 19,3 0.76 280,0 4000 1120,0 16000 63,5 2.50 0,54 0.36FC849-08 12,7 0.50 22,6 0.89 280,0 4000 1120,0 16000 88,9 3.50 0,64 0.43FC849-10 16,0 0.63 25,7 1.01 280,0 4000 1120,0 16000 101,6 4.00 0,90 0.60FC849-12 19,1 0.75 30,0 1.18 280,0 4000 1120,0 16000 120,7 4.75 1,07 0.72
ConstructionSynthetic rubber tube with twolayers of wire braid reinforce-ment and abrasion resistancesynthetic rubber cover.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationIndustrial and hydraulic systemapplications with petroleum andwater-based fluids. Recommendedfor use on construction, forestry,and other off-highway vehicles.For more information on specificfluid applications and tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
Fitting Reference PageCrimp
TTC 66Skive Nipple * 66Socket Data 64
*-06 thru -12 only
44 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC849B-04 6,4 0.25 15,2 0.60 280,0 4000 1120,0 16000 50,8 2.00 0,36 0.24FC849B-06 9,7 0.38 19,3 0.76 280,0 4000 1120,0 16000 63,5 2.50 0,54 0.36FC849B-08 12,7 0.50 22,6 0.89 280,0 4000 1120,0 16000 88,9 3.50 0,64 0.43FC849B-10 16,0 0.63 25,7 1.01 280,0 4000 1120,0 16000 101,6 4.00 0,90 0.60FC849B-12 19,1 0.75 30,0 1.18 280,0 4000 1120,0 16000 120,7 4.75 1,07 0.72
ConstructionSynthetic rubber tube with twolayers of wire braid reinforce-ment, synthetic rubber interme-diate cover and BRUISER outercover.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHigh abrasion industrial andhydraulic system applicationswith petroleum and water-basedfluids. Recommended for use oncritcal applications in construc-tion, forestry, and other off-high-way vehicles. BRUISER outercover offers unmatched abrasion,chemical, and environmental pro-tection. For more information onspecific fluid applications andtemperature ratings, see pages349-355.
Operating Temperature Range–57°C to +100°C [–70°F to +212°F]
ApplicationLow temperature flexing andhydraulic system service withpetroleum and water-base fluids.For use in frigid environments onconstruction equipment and othermobile applications. For moreinformation on specific fluid appli-cations and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
2766Double wire braidMIL-DTL-13531, Type II, Class A
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–54°C to +93°C [–65°F to +200°F]
ApplicationHigh pressure hydraulics, fueland lubricating oil and gasoline.For more information specificfluid applications and high temperature ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
TTC 66Skive Nipple * 66Socket Data 64
*-04 thru -20 only
Fitting Reference PageCrimp
Skive Nipple 66Socket Data 64
Reusable Fitting 156Socket Data 65
46 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC693EPDM hoseDouble wire braided high pressure
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC693-04 6,4 0.25 15,2 0.60 350,0 5000 1400,0 20000 101,6 4.00 0,37 0.25FC693-06 9,7 0.38 19,1 0.75 280,0 4000 1120,0 16000 127,0 5.00 0,54 0.36FC693-08 12,7 0.50 22,1 0.87 245,0 3500 980,0 14000 177,8 7.00 0,60 0.40
Operating Temperature Range–40°C to +75°C [–40°F to +175°F]
ApplicationGround support equipment(GSE), industrial phosphate ester-based fluids, water glycol sys-tems. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
FC735 BRUISERUltra-abrasion resistant coverHi-Impulse Double wire braidMeets or exceeds: SAE 100R16 Type S, EN 857 2SC, ISO 11237-1 Type 2SC
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHigh abrasion applications.Hydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore information on specific fluidapplications and high temperatureratings, see pages 349-355.
*Meets SAE100R2 pressures.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
TTC 66
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
47EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
2781HI-IMPULSEDouble wire braidMeets or exceeds: SAE 100R2A, EN853 2ST, ISO 1436-1 Type 2ST
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft400,0 5800† 1600,0 23200†
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore information on specific fluidapplications and high temperatureratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
†Improved pressure performancewhen used with global fittings.
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
ConstructionSynthetic rubber tube, doublewire braid reinforcement andsynthetic rubber cover. Meets orexceeds EN requirements at 1/2SAE Bend Radius.
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore information on specific fluidapplications and high temperatureratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
Skive Nipple 66Socket Data 64
Reusable Fitting 156Socket Data 65
Fitting Reference PageCrimp
TTC 66Skive Nipple * 66Socket Data 64
*-04 thru -20 only
GH781 MATCHMATE Plus HI-IMPULSE Double wire braidMeets or exceeds:SAE 100R16 Type S, EN857 2SC, ISO 11237-1 Type 2SC
48 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
GH195 AQPMATCHMATE BLUE HI-IMPULSE Double wire braidMeets or exceeds:
SAE 100R2AT Type S, EN853 2SN ISO 1436-1 Type 2SN
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationPetroleum and fire resistanthydraulic fluids, fuel and lubricat-ing systems. For more informa-tion on specific fluid applicationsand high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
GH793 MATCHMATE PlusHI-IMPULSEDouble wire braidMeets or exceeds:
SAE 100R2AT Type S, EN853 2SN, ISO 1436-1 Type 2SN
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft400,0 5800† 1600,0 23200†
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore information on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
†Improved pressure performancewhen used with global fittings.
r
r
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
Reusable Fitting 165Socket Data 65
Fitting Reference PageCrimp
TTC 66Skive Nipple 66Socket Data 64
49EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
FC195 AQPHI-IMPULSE Double wire braidMeets or exceeds: SAE 100R2A, EN853 2ST, ISO 1436-1 Type 2ST
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft400,0 5800† 1600,0 23200†
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationPetroleum and fire resistanthydraulic fluids, fuel, and lubricat-ing systems. For more informa-tion on specific fluid applicationsand high temperature ratings,see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
† Improved pressure performancewhen used with global crimp fittings.
r
Fitting Reference PageCrimp
Skive Nipple 66Socket Data 64
Reusable Fitting 156Socket Data 65
FC636EPDM hoseFour spiral wire
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC636-12 19,1 0.75 30,5 1.20 280,0 4000 1120,0 16000 241,3 9.50 1,31 0.88FC636-16 25,4 1.00 37,6 1.48 280,0 4000 1120,0 16000 304,8 12.00 1,74 1.17FC636-20 31,8 1.25 46,5 1.83 210,0 3000 840,0 12000 419,1 16.50 2,31 1.55FC636-24 38,1 1.50 53,6 2.12 175,0 2500 700,0 10000 508,0 20.00 2,90 1.96
ConstructionSynthetic EPDM tube, 4-spiralwire reinforcement, and greenEPDM synthetic cover.
Operating Temperature Range–40°C to +75°C (–40°F to +175°F).
ApplicationGround support equipment(GSE), industrial phosphate esterbased fluids, water glycol sys-tems. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
Fitting Reference PageCrimp
TTC12 66
50 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC323 AQPHigh temperatureFour spiral wire
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC323-12 19,1 0.75 30,5 1.20 210,0 3000 840,0 12000 241,3 9.50 1,40 0.94FC323-16 25,4 1.00 37,6 1.48 210,0 3000 840,0 12000 304,8 12.00 1,82 1.22FC323-20 31,8 1.25 47,2 1.86 210,0 3000 840,0 12000 419,1 16.50 2,53 1.70FC323-24 38,1 1.50 53,6 2.11 210,0 3000 840,0 12000 508,0 20.00 3,27 2.20FC323-32 50,8 2.00 66,8 2.63 210,0 3000 840,0 12000 635,0 25.00 4,78 3.21
FC324 AQPHigh temperatureFour spiral wire
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC324-08 12,7 0.50 23,1 0.91 280,0 4000 1120,0 16000 177,8 7.00 0,91 0.61FC324-12 19,1 0.75 30,5 1.20 280,0 4000 1120,0 16000 241,3 9.50 1,47 0.99FC324-16 25,4 1.00 37,6 1.48 280,0 4000 1120,0 16000 304,8 12.00 1,92 1.29
r
r
ConstructionAQP elastomer tube, 4-spiralwire reinforcement and a blueAQP elastomer cover.
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationHydraulic system service withpetroleum, fire-resistant, andwater-base fluids, fuel, and lubri-cating systems. For more infor-mation on specific fluid applica-tions and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
Fitting Reference PageCrimp
Single Skive (-12, -16) 106Internal Skive (-12, -16) 118Socket Data 64
Reusable Fitting (-8 only) 169Socket Data 65
ConstructionAQP elastomer tube, 4-spiralwire reinforcement and a blueAQP elastomer cover.
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationHydraulic system service withpetroleum, fire-resistant, andwater-base fluids, fuel, and lubri-cating systems. For more infor-mation on specific fluid applica-tions and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
Fitting Reference PageCrimp
Single Skive* 106Internal Skive 118Socket Data 64
* -12 thru -24 only
51EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
GH493 MATCHMATE Plus1/2 SAE bend radiusFour spiral wireSAE 100R12, EN 856 Type R12
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft385,0 5500 1517,0 22000 62,5** 2.50**
ConstructionSynthetic rubber tube, 4-spiralwire reinforcement, black syn-thetic rubber cover.
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial use. Formore information on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
*Pressure rating with TTC12 fittings and reusables
**1/2 SAE Bend Radius withTTC12 fittings.
‡ Pressure rating with TTC12 fitting only.
For Complete Agency ListingsSee pages 346-348.
FC325 AQPFour spiral wire
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC325-12 19,1 0.75 32,0 1.26 350,0 5000 1400,0 20000 241,3 9.50 1,62 1.09FC325-16 25,4 1.00 38,6 1.52 350,0 5000 1400,0 20000 304,8 12.00 2,11 1.42
ConstructionAQP elastomer tube, 4-spiralwire reinforcement and a blueAQP elastomer cover.
Operating Temperature Range–40°C to +150°C [–40°F to +302°F]
ApplicationHydraulic system service withpetroleum, fire-resistant, andwater-base fluids, fuel, and lubri-cating systems. For more infor-mation on specific fluid applica-tions and high temperature rat-ings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
Internal Skive 123Socket Data 64
Fitting Reference PageCrimp
TTC12 66Single Skive 106Internal Skive§ 118Socket Data 64
Reusable Fitting 169Socket Data 65
§ -16 thru -32 only
52 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC659Flexible, 1/2 SAE bend radiusFour spiral wireExceeds SAE 100R12, EN856 Type R12
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
ConstructionSynthetic rubber tube, 4-spiralwire reinforcement and syntheticrubber cover.
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationHydraulic system service withpetroleum and water-base fluidsrequiring premium performanceand flexibility. For more specificinformation on fluid applications,see pages 349-355.
For Complete Agency ListingSee pages 346-348.
* 1/2 SAE Bend Radius
r
Fitting Reference PageCrimp
TTC12 66
53EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
FC254Four heavy spiral wireExceeds SAE 100R11, EN 856 4SP
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial use. Formore specific information on fluidapplications, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
† Rated at 10,000 psi for waterblast applications using internalskive fittings.
* Available with BRUISER cover as FC854-08.
rMaximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ft385,0 5500 1517,0 22000
Operating Temperature Range–40°C to +121°C (–40°F to +250°F)
ApplicationHigh abrasion industrial andhydraulic system applicationswith petroleum and water-basedfluids. Recommended for use oncrical applications in construction,forestry, and other off-highwayvehicles. BRUISER outer coveroffers unmatched abrasion,chemical and environmental pro-tection. For more information onspecific fluid applications andtemperature ratings, see pages349-355.
For Complete Agency ListingsSee pages 346-348.
*Pressure rating with TTC12 fittings and reusables.
FC736 BRUISERUltra-abrasion resistant coverFour spiral wireExceeds SAE 100R12, EN 856 Type R12
Fitting Reference PageCrimp
TTC12 66Single Skive 106Internal Skive (-16, -20) 118Socket Data 64
54 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC273Four or six spiral wireSAE 100R13, EN 856 Type R13, ISO 3862 Type R13
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC273-12 19,1 0.75 32,0 1.26 350,0 5000 1400,0 20000 240,0 9.50 1,56 1.05FC273-16 25,4 1.00 38,6 1.52 350,0 5000 1400,0 20000 300,0 12.00 1,96 1.32FC273-20 31,8 1.25 49,8 1.96 350,0 5000 1400,0 20000 420,0 16.50 3,66 2.46FC273-24 38,1 1.50 57,4 2.26 350,0 5000 1400,0 20000 500,0 20.00 4,70 3.16FC273-32 50,8 2.00 71,1 2.80 350,0 5000 1400,0 20000 640,0 25.00 7,11 4.78
ConstructionSynthetic rubber tube, multipleheavy spiral wire (4 wire for -12,-16; 6 wire for -20, -24 and -32);black synthetic rubber cover.
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationHydraulic system service withpetroleum and water-base fluids,for general industrial service. Formore information on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
FC273B BRUISERUltra-abrasion resistant coverFour or six spiral wireSAE 100R13, EN 856 Type R13, ISO 3862 Type R13
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC273B-12 19,1 0.75 33,3 1.31 350,0 5000 1400,0 20000 240,0 9.50 1,55 1.04FC273B-16 25,4 1.00 39,9 1.57 350,0 5000 1400,0 20000 300,0 12.00 1,95 1.31FC273B-20 31,8 1.25 51,3 2.02 350,0 5000 1400,0 20000 420,0 16.50 3,63 2.44FC273B-24 38,1 1.50 58,9 2.32 350,0 5000 1400,0 20000 500,0 20.00 4,78 3.21FC273B-32 50,8 2.00 72,6 2.86 350,0 5000 1400,0 20000 640,0 25.00 7,05 4.74
ConstructionSynthetic rubber tube, multipleheavy spiral wire (4 wire for -12,-16; 6 wire for -20, -24 and -32);synthetic rubber intermediatecover and BRUISER outer cover.
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationHigh abrasion industrial andhydraulic system applications withpetroleum and water-based fluids.Recommended for use on cricalapplications in construction,forestry, and other off-highwayvehicles. BRUISER outer coveroffers unmatched abrasion, chem-
ical and environmental protection.For more information on specificfluid applications and temperatureratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
Spiral TTC 97Single Skive 113Internal Skive 123Socket Data 64
Fitting Reference PageCrimp
Spiral TTC 97
55EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
GH506Four spiral wireEN 856 4SH
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftGH506-12* 19,1 0.75 32,3 1.27 420,0 6090 1680,0 24360 280,0 11.00 1,49 1.00GH506-16* 25,4 1.00 38,4 1.51 380,0 5510 1520,0 22040 340,0 13.38 2,05 1.38GH506-20* 31,8 1.25 45,5 1.79 350,0 5075 1400,0 20300 460,0 18.11 2,54 1.71GH506-24* 38,1 1.50 53,6 2.11 300,0 4350 1200,0 17400 560,0 22.05 3,27 2.20GH506-32* 50,8 2.00 68,1 2.68 250,0 3625 1000,0 14500 700,0 27.56 4,58 3.08
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationFour wire hose for high pressurehydraulic systems with petrole-um and water-base fluids. Formore information on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
* Also available as an M100 length(GH506-12M100). This P/N is a mini-mum 100 feet in length.
GH466Six spiral wire* -32 size is also available.
See bulletin A-HOSP-MS003-E for more information.
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftGH466-20 31,8 1.25 49,3 1.94 420,0 6090 1680,0 24000 420,0 16.50 3,48 2.34GH466-24 38,1 1.50 57,4 2.26 420,0 6090 1680,0 24000 510,0 20.80 4,63 3.11
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationSix wire spiral hose for pressuresystems with extreme pressurepeaks. For use with petroleumand water-base fluids. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
Spiral TTC 97
Fitting Reference PageCrimp
Spiral TTC 97
56 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
SPECIALTY &
TRU
CK HO
SELO
W &
MED
IUM
PRESSU
RE HO
SEH
IGH
PRESSURE H
OSE
HO
SE FITTING
SA
DA
PTERS &TU
BE FITTIN
GS
ACCESSO
RIES &
ASSEMBLY IN
STRUCTIONS
HO
SE ASSEM
BLY
EQU
IPMEN
TA
PPEND
ICIES
FC606Six spiral wireSAE 100R15
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC606-16 25,4 1.00 41,9 1.65 420,0 6000 1680,0 24000 304,8 12.00 2,66 1.79FC606-20 31,8 1.25 49,5 1.95 420,0 6000 1680,0 24000 419,1 16.50 3,62 2.43FC606-24 38,1 1.50 58,4 2.30 420,0 6000 1680,0 24000 508,0 20.00 4,72 3.17
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationHigh-pressure hydraulics, hydro-static transmissions. For moreinformation on specific fluidapplications and high tempera-ture ratings, see pages 349-355.
For Complete Agency ListingsSee pages 346-348.
FC606B BRUISERUltra-abrasion resistant coverSix spiral wireSAE 100R15, ISO 3862 Type R15
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC606B-16 25,4 1.00 42,9 1.69 420,0 6000 1680,0 24000 304,8 12.00 2,60 1.79FC606B-20 31,8 1.25 51,6 2.03 420,0 6000 1680,0 24000 419,1 16.50 3,57 2.43FC606B-24 38,1 1.50 58,9 2.32 420,0 6000 1680,0 24000 508,0 20.00 4,57 3.07
Operating Temperature Range–40°C to +121°C [–40°F to +250°F]
ApplicationHigh-abrasion industrial andhydraulic system applicationswith petroleum and water-basedfluids. Recommended for use oncritical applications in construc-tion, forestry, and other off-high-way vehicles. BRUISER outer
cover offers unmatched abrasion,chemical, and environmental pro-tection. For more information onspecific fluid applications andtemperature ratings, see pages349-355
For Complete Agency ListingsSee pages 346-348.
r
r
Fitting Reference PageCrimp
Spiral TTC 97Internal Skive 128Socket Data 64
Fitting Reference PageCrimp
Spiral TTC 97
57EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
APP
END
ICIE
SH
OSE
ASS
EMB
LY
EQU
IPM
ENT
ACC
ESSO
RIES
&
ASSE
MBL
Y IN
STRU
CTIO
NS
AD
APT
ERS
&TU
BE
FITT
ING
S
HO
SE F
ITTI
NG
SH
IGH
PRE
SSU
RE H
OSE
LOW
& M
EDIU
M
PRES
SURE
HO
SESP
ECIA
LTY
&
TRU
CK H
OSE
FC57910,000 PSI Jack HoseDouble wire braidMeets IJ100 requirements
Maximum Minimum MinimumOperating Burst Bend Weight
Part Number Hose I.D. Hose O.D. Pressure Pressure Radius of Hose
mm in mm in bar psi bar psi mm in Kg/m lbs/ftFC579-04 6,4 0.25 13,5 0.53 700,0 10000 1400,0 20000 50,8 2.00 0,33 0.22FC579-06 9,7 0.38 17,5 0.69 700,0 10000 1400,0 20000 63,5 2.50 0,43 0.29
Operating Temperature Range–40°C to +100°C [–40°F to +212°F]
ApplicationHydraulic jacking system servicewith petroleum and water-basefluids. Meets the performancerequirements of the MaterialHandling Institute SpecificationIJ100. For more information onspecific fluid applications andhigh temperature ratings, seepages 349-355.