® EasyLift 600 PromoLine Permanent-electro magnetic fixed beam for thin sheets handling • Light and compact • Safety factor 1:3 • No maintenance 2 YEARS warranty Fixed beam with permanent-electro magnetic modules. Expressly designed for typical handling requirements in carpentry, to serve cutting machines, in the distribution of steel and service centers. To handle sheets of various sizes in total flexibility. Beam in tubular compact construction with onboard electronic unit. Activable by built-in pushbutton or with remote control (optional). Safety through power for thicknesses from 1,5 mm 600 kg capacity
2
Embed
EasyLift 600 PromoLine - Tecnomagnete SpA...Aprile 2016 Proprietà di TECNOMAGNETE S.p.A. easy-lift-600-2016-COMM (2).xlsx 0 200 400 600 0,5 0,75 1 1,25 Cari Traferro -Air gap -T [mm]
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
®EasyLift 600 PromoLine Permanent-electro magnetic fixed beam for thin sheets handling
• Light and compact• Safety factor 1:3• No maintenance
2 YEARS warranty
Fixed beam with permanent-electro magnetic modules.Expressly designed for typical handling requirements in carpentry, to serve cutting machines, in the distribution of steel and service centers.
To handle sheets of various sizes in total flexibility.Beam in tubular compact construction with onboard electronic unit. Activable by built-in pushbutton or with remote control (optional).
STANDARD SUPPLY- 6 permanent-electro magnetic modules
- Fixed beam with hanging chains and ring to the hook
for single pull
- Special joint system between magnets and crossbeams
- Electronic compact control unit XT200 with UCS
saturation control system
- MAG/DEMAG pushbuttons built-in
- DUTANAC anti-deactivation device
ON REQUEST:
- TC remote control with MAG / SAFE / DEMAG functions.
ModelEasyLift
Thickness mm
Min. width mm
Max. width mm
Min. lenght mm
Max. lenght mm
SWLkg
EasyLift 600 1,5 - 18 1000 2000 2000 3000 600
EasyLift is safe! It doesn’t require electrical supply during the handling of the load thus being unaffected by any power failure. No battery back up required. The high energy magnets grant constant and high concentrated force on the load with the best performances at indefinite period of time.
The Dautanac device allows magnetization / demagnetization only when EASYLIFT is on the ground, preventing any accidental deactivation during the handling.
Easy and practicalNo moving parts – No wearing – No heat generation – No energy consumption.The magnetization (MAG) and demagnetization (DEMAG) cycles are performed in a few seconds by a push button.No residual magnetism. Light weight: 170 kg only.
EasyLift is quick in payback!One operator can perform all operations. Optimization of the deposit area through picking up the load from the top, without using spacers. No load damage. No battery back up is required. No maintenance. No additional costs.
We reserve the right to bring up any modification connected with the technological development.
AIR-GAP (mm)
FORCE / AIR-GAP CURVE
FOR
CE
(kgf
)
DIMENSIONS (mm)
LOAD CHARACTERISTICS
New electronic control unit XT200 series. Compact and lighweight, is equipped with UCS saturation contold system and built-in digital push-buttons for MAG/DEMAG cycles.