LAMDA ELECTRIC PT. Lamda Teknologi Indonesia
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
EARTHING AND LIGHTNING PROTECTION
1
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Copper Bond Electrode Rod (Threaded) They are made from a low carbon, high tensile strength (600m/mm2 minimum) steel core with a coating
of molecular bonded 99.9% pure electrolytic copper.
The minimum thickness of this coating is 100 micro (0.1 mm), 200 micro (0.2 mm), 250 micro (0.25 mm).
Extensible type rods have a rolled thread (UNC2A at each end).
Rolled threads have a higher strength than cut threads and also preserve the copper coating at the
treads roots.
Special size and copper thickness can be supplied on request.
Part No. Length Rod Dia
mm
Thread Size
ft mm in mm
ERT 1112 4' 1200 11 1/2" 12.5
ERT 1115 5' 1500 11 1/2" 12.5
ERT 1118 6' 1800 11 1/2" 12.5
ERT 1212 4' 1200 12.5 9/16" 14.2
ERT 1215 5' 1500 12.5 9/16" 14.2
ERT 1218 6' 1800 12.5 9/16" 14.2
ERT 1412 4' 1200 14.2 5/8" 15.8
ERT 1415 5' 1500 14.2 5/8" 15.8
ERT 1418 6' 1800 14.2 5/8" 15.8
ERT 1424 8' 2400 14.2 5/8" 15.8
ERT 1430 10' 3000 14.2 5/8" 15.8
ERT 1712 4' 1200 17.2 3/4" 19
ERT 1715 5' 1500 17.2 3/4" 19
ERT 1718 6' 1800 17.2 3/4" 19
ERT 1724 8' 2400 17.2 3/4" 19
ERT 1730 10' 3000 17.2 3/4" 19
2
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Copper Bond Electrode Rod (Un-Threaded)
They are made from a low carbon, high tensile strength (600m/mm2 minimum) steel core with a coating
of molecular bonded 99.9% pure electrolytic copper.
The minimum thickness of this coating is 100 micro (0.1 mm), 200 micro (0.2 mm), 250 micro (0.25 mm).
Special size and copper thickness can be supplied on request.
Part No. Length Rod Dia
ft mm in mm
ER 101 4' 1200 1/2" 12.5
ER 102 5' 1500 1/2" 12.5
ER 103 6' 1800 1/2" 12.5
ER 144 4' 1200 9/16" 14
ER 145 5' 1500 9/16" 14
ER 146 6' 1800 9/16" 14
ER 201 4' 1200 5/8" 16
ER 202 5' 1500 5/8" 16
ER 203 6' 1800 5/8" 16
ER 204 8' 2400 5/8" 16
ER 205 10' 3000 5/8" 16
ER 301 4' 1200 3/4" 19
ER 302 5' 1500 3/4" 19
ER 303 6' 1800 3/4" 19
ER 304 8' 2400 3/4" 19
ER 305 10' 3000 3/4" 19
3
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Driving Head
Driving studs are made from high tensile steel with a
socket head cap screw.
Coupling
Couplers are counter bored to completely enclose threads
& protect from damage and corrosion
Driving Tip
Part No. Suitable for Rod Dia
In mm
DH 12 1/2" 12.5
DH 14 9/6" 14
DH 16 5/8" 16
DH 19 3/4" 19
Part No. Length (mm)
Suitable for Rod Dia
in mm
CC 12 60 1/2" 12.5
CC 16 60 9/6" 14
CC 19 70 5/8" 16
CC 14 70 3/4" 19
Part No. Length (mm) Suitable for Rod Dia
in mm
DS 12 60 1/2" 12.5
DS 14 60 9/6" 14
DS 16 70 5/8" 16
DS 19 70 3/4" 19
4
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Solid Copper Grounding Rod
Solid copper earth rod are made from 99.9% pure
electrolytic copper. Solid copper rods offers greater
resistance to corrosion. They are ideally used in applications
where soil condition are very aggressive, for eg. Solid with
high salt content.
Driving Head
Driving Heads are made from hardened and tempered
steel. It is used protect the internal thread and the top of
the earth electrode when being driven into the ground.
Coupling Dowel
Coupling dowels for stainless steel earth rods are made
from stainless steel or brass. It used to join either the solid
copper and stainless steel rods.
Driving Spike
Driving spikes are made from case hardened steel. It is used
to enable the earth. Electrode to be driven into the ground
more easily and stops the earth electrode from being
damage.
Part No. Rod Dia (mm) Length
SCR-512 15 1200 mm or 4'
SCR-515 15 1500 mm or 5'
SCR-520 20 1200 mm or 6'
SCR-521 20 1500 mm or 5'
Part No. Length (mm) Thread Dia (mm) Material
DH 16 40 10 Hardened steel DH 20 42 10
Part No. Length Thread Dia (mm) Material
CD 10 40 10 Stainless steel CD 10 40 10
Part No. Length Thread Dia (mm) Material
DS 10 40 10 Stainless steel DS 10 40 10
5
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Solid Copper Earth Rod
Solid copper earth rod are made from 99.9% pure electrolytic copper.
Solid copper earth rod offers greater resistance to corrosion. They are ideally used in applications where
soil conditions are very aggressive, foreg, soil with high salt content.
Mechanically Claded Earth Rod
Mechanically cladded copper earth rod is made from 99.9% electrolytic grade copper tube with wall
thickness of 0.25 mm (25 micro) is cladded to a low carbon steel rod.
Part No. Length Rod Dia
ft mm in mm
CR 101 4' 1200 1/2" 12.5
CR 102 5' 1500 1/2" 12.5
CR 144 4' 1200 9/16" 14
CR 145 5' 1500 9/16" 14
CR 201 4' 1200 5/8" 16
CR 202 5' 1500 5/8" 16
CR 203 6' 1800 5/8" 16
Part No. Length Rod Dia
ft mm in mm
ER 101 4' 1200 1/2" 12.5
ER 102 5' 1500 1/2" 12.5
ER 144 4' 1200 9/16" 14.2
ER 145 5' 1500 9/16" 14.2
ER 201 4' 1200 5/8" 16
ER 202 5' 1500 5/8" 16
ER 203 6' 1800 5/8" 16
ER 302 5' 1500 3/4" 19
ER 303 6' 1800 3/4" 19
6
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Rod to Tape Clamp
The clamps are used to join various sizes of conductor tape to
the earth electrode, which have a high resistance to
corrosion and are mechanically strong to ensure a lasting
connection.
Rod to Cable Clamp
The clamps are used to join various sizes of cable to the earth
electrode, which have a high resistance to corrosion and are
mechanically strong to ensure a lasting connection.
Part No. Rod Dia
Max. Conductor in mm
RTC 10 1/2" 12.5 26 x 12 mm2
RTC 10 5/8" 16 26 x 12 mm2
RTC 10 3/4" 19 26 x 10 mm2
RTC 30 5/8" 16 40 x 12 mm2
RTC 40 5/8" 16 51 x 8 mm2
RTC 50 3/4" 19 51 x 12 mm2
RTC 60 1/2" 12.5 26 x 20 mm2
RTC 60 5/8" 16 26 x 18 mm2
RTC 60 3/4" 19 26 x 10 mm2
RTC 60 1" 25 26 x 10 mm2
Part No. Rod Dia
Max. Conductor in mm
RCC 9 3/8" 9.5 6-35 mm2
RCC 12 1/2" 12.5 16-50 mm2
RCC 16 5/8" 16 16-70 mm2
RCC 20 3/4" 19 16-95 mm2
RCC 25 1" 25 70-120 mm2
7
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
U-Bolt Rod to tape Clamp (Single Plate)
The clams are used to join various sizes of conductor
tape to earth electrode / rebar.
U-Bolt Rod to tape Clamp (Double Plate)
The clams are used to join 25 x 3 mm conductor tape to
earth electrode / rebar, without the need to drill the
tape.
Part No. Rod Dia
Material in Mm
URC-1-16 5/8" 16
Copper/Brass URC-1-20 3/4" 20
URC-1-25 1 25
Part No. Rod Dia
Material in Mm
URC-2-16 5/8" 16
Copper/Brass URC-2-20 3/4" 20
URC-2-25 1 25
8
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
U-Bolt Rod to Cable Clamp
U-Bolt Rod Clamp
Part No. Rod/Pipe Dia No. of
Conductors Conductor Size
(mm2) No. of Copper Tape
in mm
UC 301 5/8"-3/4" 16-19 1 50-95 -
UC 302 5/8"-3/4" 16-19 2 50-70 -
UC 303 5/8"-3/4" 16-19 3 50-70 -
UC 304 5/8"-3/4" 16-19 5 50-70 -
UC 305 5/8"-3/4" 16-19 3 70-120 -
UC 306 5/8"-3/4" 16-19 2 50-70 -
UC 307 5/8"-3/4" 16-19 1 70-120 -
UC 308 5/8"-3/4" 16-19 - - 1 or 2
UC 309 - 30 - - 1 or 2
UC 310 - 40 - - 1
Part No. Rod Dia
(mm) Conductor
(mm2) Material
URCC 16 14.2-17.2 16-70 Copper/Brass
URCC 70 18-25 70-185
9
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Tape Clip
These Metal Clip Hold the Tape Flush to the Surface
and Fixed Using Two Screws
Tape Clip
DC Tape Clamp
DC Tape Clamp
Part No. Conductor Size
(mm) Material
TCC 203 20 x 3 Copper/Brass
TCC 253 25 x 3
Part No. Conductor Size
(mm) Material
TCA 203 20 x 3 Aluminium
TCA 253 25 x 3
Part No. Tape Size (mm) Material
ADC 203 20 x 3
Aluminium ADC 253 25 x 3
ADC 256 25 x 6
ADC 506 50 x 6
Part No. Conductor (mm) Material
CDC 203 20 x 3
Copper/Brass
CDC 253 25 x 3
CDC 256 25 x 6
CDC 503 50 x 3
CDC 504 50 x 4
CDC 506 50 x 6
10
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Square Tape Clamp
Square clamps are made form cooper and aluminium,
it is used for four ways connection and suitable for
crossing over taps, straight through joints or t
connections to from a continuous network of tapes.
Square Conductor Clamp
Square clamps for copper and aluminium circular
conductor used for a four ways connection and
suitable for crossing over taps, straight through joints
or t connections to from a continuous network of
tapes.
Part No. Conductor Size
(mm2) Material
ASC 253 25 x 3 Aluminium
CSC 253 25 x 3
Copper/Brass CSC 256 25 x 6
CSC 506 50 x 6
Part No. Conductor Size
(mm2) Material
SCC 50 50
Copper SCC 50 70
SCC 50 95
11
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Bi-Metallic Connector
Part No. Conductor Size
(mm2) Material
BMC 253 B 25 x 3 Aluminium Tape to
25 x 3 Copper Tape
Bimetal Clamps are used to connect Aluminium conductor to Copper Earth Conductor
Adhesive Base DC Clip
Part No. Conductor Size
(mm2) Material
BMC 253 A 25 x 3 Aluminium Tape to
25 x 3 Copper Tape
Part No. Conductor Dia
(mm) Conductor Type
OH 8 C 8 Copper
OH 8 A 8 Aluminium
OH 10 C 8 Copper pvc covered
OH 10 A 8 Aluminium pvc covered
12
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
C-Copper Clamp
Material : 99.9% Pure coppen Surface : Tin Plating on request
Split Bolted Connector
Material : Brass Surface : Tin Plated or Copper Plated on request. It is used to branch or connect aerial hard copper conductor or insulated copper conductor.
Part No.
Conductor (mm
2)
Dimensions (mm) Note
H B L C
CCA-1 25-35 25 15 22 10 Can be produced
according to customer's
drawing
CCA-2 50-70 34 21.5 25 11
CCA-3 95-95 41 25 29 14.5
CCA-4 120-120 47.5 29 30 16
Part No. Conductor
(mm2)
Dimensions (mm)
H A B L C T
CCT-10 7.5-14 9.5 6.3 6.2 12 4 1.6
CCT-16 14.5-16 11.8 7.8 7.8 13 5 2
CCT-20 16.5-20 12.8 8.6 9.7 13 5.4 2.9
CCT-26 21-26 14.7 10.2 10 16 6.5 3.2
CCT-44 27-44 19 13.4 14.4 20 8.5 4
CCT-60 45-60 21 15.4 15.4 22 9.7 4
CCT-76 61-75 24.4 17.3 17.6 22 10.8 5
CCT-98 77-98 27.8 20.8 18.8 25 12.8 5
CCT-122 99-122 29.8 22.1 21.2 26 13.5 5.5
CCT-154 123-154 34 25.7 24.4 28 17 6
CCT-190 155-190 37 28.5 25.4 35 17.4 6
CCT-240 191-240 40 30.2 28.5 40 19 7
Part No. Applicable Conductor
(mm2)
Dimensions (mm) Weight (kg) L M H S
T/J-16 16 26 10 x 1 5.3 13.9 0.023
T/J-25 25 29 14 x 1.5 7 18.5 0.034
T/J-35 35 34 18 x 1.5 8 20.8 0.057
T/J-50-70 50-70 42 24 x 2 12 27.7 0.108
T/J-90-120 90-120 50 24 x 2 14.5 30 0.142
T/J-150-185 150-180 63 24 x 2 18 34.6 0.250
T/J-200-240 200-240 72 31 x 2.5 20 32 0.301
13
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
B Bond
Bond connections are used to bond either Copper of Aluminium to flat metal surfaces.
Pipe Bond
Pipe bond connections are used to connect flat conductor objects i.e. Pipe work and hand rails etc.
Rod to Cable Lug Clamp
Rod to cable lug clamps are used to join various sizes of compression lugs to the earth electrode.
Part No. Conductor
(mm) Material
BBC 25 x 3 Copper/Brass
BBA 25 x 3 Aluminium
Part No. Conductor
(mm) Material
PBC 25 x 3 Copper/Brass
PBA 25 x 3 Aluminium
Part No. Rod Dia
Material in mm
CLUG 10 3/8" 9.5
Copper/Brass CLUG 16 5/8" 16
CLUG 20 S - 20
14
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Tee Clamp
Tee clamps for copper and aluminium circular conductor, the clamps are used for three ways connection.
Flat to Circular Square Clamp
Square clamps for copper tape to circular conductor, the base has a countersunk hole in the middle for fixing the clamp.
Test ClampCable
Test clamps are manufactured from copper, it used to form a disconnecting joint between the down conductor system and the earthing system.
Part No. Conductor Dia
(mm) Material
TC 08 8 Copper/Brass
TA 08 8 Aluminium
Part No. Tape Size
(mm) Conductor Rang
(mm/mm2) Material
SCC 25350 25 x 3 50
Copper/Brass SCC 25370 25 x 3 70
SCC 25395 31 x 3 95
Part No. Conductor Dia (mm) Material
TC 50 50
Copper/Brass TC 70 70
TC 95 95
15
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Oblong Test Clamp
Oblong Test Clamps are used to join conductor tape to facilitate in the annual testing of the lightning protection system.
Copper Test Clamp
Copper test clamp are used to form a disconnecting joint between either conductor (8 mm + 0.8 mm dia) or 25 x 3 m conductor.
Earth Bonding Point
Earth bond points are used to provide earthing continuity and a multi-bonding point. The bonding points are available with 2 or 4 holes connections and cover plate.
Part No. Conductor (mm) Material
OTCA 253 25 x 3 Aluminium
OTCC 253 25 x 3
Copper/Brass OTCC 316 31 x 6
OTCA 405 40 x 5
Part No. Conductor Dia
(mm) Conductor Size
(mm) Material
CTC 08 8 25 x 3 Copper/Brass
Part No. Length (mm)
Material
EBP 2 500
Gunmetal casting with 70 mm2 pvc copper cable
EBP 4 500
EBP 2P 500
EBP 2P-08 500
16
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Screw Down Test Clamp
Screw down test clamp are used to join 25 x 3 mm conductor tape to facilitate in the annual testing of the lightning protection system.
Plate Test Clamp
Plate type test clamps, made of brass or aluminium, which can be used as to joints or straight through joints of tapes being joints, these can also effectively be used as testing points for the network. By disconnecting the joints, plate test clamp can also be used for heavy duty up to 50 x 6 tape connections.
Part No. Conductor (mm) Material
STDC 253 25 x 3 Copper/Brass
Part No. Conductor (mm) Material
PTC 253 25 x 3 Gunmetal
17
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Air Rod
The air rods made from Electrocytic Grade Copper, one side tapper pointed and the other side with suitable threads for fixing to saddles /air terminal bases. Rods made from also can be supplied against specific requirements. Rods can be installed with or without multiple points. However, researches conducted in this regards suggest use or multiple points with taper pointed air rods are more effective than taper pointed air rods.
Air Rods Base
Copper and Aluminium Air Rod Base are used for supporting taper pointed or air Rods with tapes, four fixing holes are provided on it.
Part No. Rod Length
(mm) Rod Dia
(mm) Thread Dia
(mm) Material
CAR 0515 500 15 16
Copper CAR 1015 1000 15 16
CAR 1515 1500 15 16
CAR 2015 2000 15 16
TAR 515 T 500 15 16
Tinned Copper TAR 1515 T 1000 15 16
TAR 2015 T 1500 15 16
TAR 051 T 2000 15 16
AAR 0515 A 500 15 16
Aluminium AAR 1015 A 1000 15 16
AAR 1515 A 1500 15 16
AAR 2015 A 2000 15 16
AAR 0510 500 10 10 Copper
AAR 1010 1000 10 10
AAR 0510 A 500 10 10 Aluminium
AAR 1010 A 1000 10 10
Part No. Rod Dia
(mm) Thread Dia
(mm)
Max. Conductor
width (mm) Material
DC 312 12 12 25 Copper/Brass
DC 515 15 16 25
DA 312 12 12 25 Aluminium
DA 515 15 16 25
18
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Air Termination
Tapper pointed air rods ate made from copper/base. One side tapper pointed and the other side with suitable for fixing to saddles/air terminal bases. Rods made of aluminium alco can be supplied against specific requirements. Rod can be use of multiple points with taper points with taper pointed air rods are more effective than taper pointed air rods.
Part No. Rod Length
(mm) Rod Dia
(mm) Thread Dia
(mm) Material
ATC 3142 300 14.2 5/8"
Copper/Brass ATC 5142 500 14.2 5/8"
ATC 10142 1000 14.2 5/8"
ATC 20142 2000 14.2 5/8"
ATC 31558-16 300 15 5/8' or 16 mm
Copper/Brass
ATC 51558-16 500 15 5/8' or 16 mm
ATC 101558-16 1000 15 5/8' or 16 mm
ATC 201558-16 2000 15 5/8' or 16 mm
ATC 31658-16 300 16 5/8' or 16 mm
ATC 51658-16 500 16 5/8' or 16 mm
ATC 101658-16 1000 16 5/8' or 16 mm
ATC 201658-16 2000 16 3/4'
ATC 5172 500 17.2 3/4'
Copper/Brass ATC 10172 1000 17.2 3/4'
ATC 20172 2000 17.2 5/8'
ATA 3142 300 14.2 5/8'
Aluminium
ATA 5142 500 14.2 5/8'
ATA 10142 1000 14.2 5/8'
ATA 15142 1500 14.2 5/8'
ATA 20142 2000 14.2 5/8' or 16 mm
ATA 31558-16 300 15 5/8' or 16 mm
Aluminium
ATA 51558-16 500 15 5/8' or 16 mm
ATA 101558-16 1000 15 5/8' or 16 mm
ATA 151558-16 1500 15 5/8' or 16 mm
ATA 201558-16 2000 15 5/8' or 16 mm
ATA 31658-16 300 16 5/8' or 16 mm
Aluminium
ATA 51658-16 500 16 5/8' or 16 mm
ATA 101658-16 1000 16 5/8' or 16 mm
ATA 151658-16 1500 16 5/8' or 16 mm
ATA 201658-16 2000 16 3/4'
ATA 5172 500 17.2 3/4'
Aluminium ATA 10172 1000 17.2 3/4'
ATA 20172 2000 17.2
19
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Air Termination
Part No. Dimensions (mm)
H H1 H2 H3 D
ATC 01-A 380 250 130 90 100
ATC 01-B 550 420 130 140 100
ATC 01-C 1000 870 130 300 100
Part No. Dimensions (mm)
H H1 H2 H3 D
ATC 02-A 380 250 130 90 100
ATC 02-B 550 420 130 140 100
ATC 02-C 1000 870 130 300 100
Part No. Dimensions (mm)
H H1 H2 H3
ATC 03-A 750 400 250 100 100
Part No. Dimensions (mm)
H H1 H2 H3 1 2
ATC 03-B 1500 250 200 700 150 200
20
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Earth Plate Solid Copper
Solid copper earth plates are used as part of earthing network, which provide a log lasting solution where earth rods are unsuitable and also used as an electrode where significant amounts of fault current can be encountered.
Earth Mat Copper Tape
The Copper Earth Mat are used where step potential could cause problems, which provide a long lasting earthing solution and used as an electrode where significant amounts of fault current can be encountered. Solid copper plate arrangement Lattice copper mat arrangement
Part No. Size (mm) Material
SCEP 615 600 x 600 x 1.5
Copper SCEP 630 600 x 600 x 3
SCEP 915 900 x 900 x 1.5
SCEP 930 900 x 900 x 3
Part No. Size (mm) Material
LCEM 630 600 x 600 x 3 High conductivity copper
LCEM 930 900 x 900 x 3
21
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Rod To Tape Coupling
Rod To Tape Couplers are made from copper and used in conjunction with Side Mounted Brackets.
Air Rod Bracket
Air Rod Brackets are to be installed to the side of the building were it is not possible to fit a conventional air terminal base. The brackets are to be used in conjunction with the rod to tape coupling.
Puddle Flanges
Made from copper or Aluminium, used where the roof termination or down conductors have to pass through water proof couering, roff, etc.
Part No. Conductor Dia
(mm) Conductor Size
(mm) Material
RBCC 16 16 25 x 3 Copper/Brass
Part No. Conductor Dia
(mm) Conductor Size
(mm) Material
APK 15 15 16 Copper
APK 15 A 15 16 Aluminium
APK 15 T 15 16 Tinned Copper
Part No. Dimension (mm) Material
PFC 150 x 150 x 600 Copper
PFA 150 x 150 x 600 Aluminium
22
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Compression Clamp
Inspection Pit
These are suitable for most types of earthing & lightning protection installations. Not suitable for use in areas where high load, small wheel vehicles are used.
Product Introduction
Part No. Diameter of lamp Height of Lamp Length of screw Material
IP 5 160 mm 185 mm 200 mm M16
The obstruction lamp is a product applied by the communication base stations up to date since a long time ago. It is based on DC or AC power as its power supply system with the light emitting tube as its light source. Its outside case is made of polycarbonate and engineering plastic materials, controlled with the light sensitive resistance. It flashes by itself at the night time and turns off automatically at the day time.
Part No. Suitable Conductor (mm2)
BC-119-50 50-70
BC-119-70 70-95
BC-119-95 95-120
Part No. Overall (mm) Description Material
IP 5 300 x 25 x 6 5 Hole pit bar Hard drawn copper bar IP 7 300 x 25 x 6 7 Hole pit bar
23
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Earth Bars
Other sizes request
Earth Bars Insulators
Electrical : Dielectric Strength : > 14 kV/mm Resistance (normal) : > 10 M Ohms Resistance (bolted) : > 10 M Ohms Arc resistance : > 180 secretary Tracking Index : > 600 Inserts: Brass M6 9 Nm Torque (Torque can depend M8 18 Nm Torque on the Standoff M10 35 Nm Torque diameter)
Part No. Dimension (mm2) Material
EBAR 6 300 x 90 x 90 6 ways earth bar disconnect link
EBAR 8 450 x 90 x 90 8 ways earth bar disconnect link
EBAR 10 450 x 90 x 90 10 ways earth bar disconnect link
EBAR 12 520 x 90 x 90 12 ways earth bar disconnect link
EBAR 14 650 x 90 x 90 14 ways earth bar disconnect link
EBAR 16 650 x 90 x 90 16 ways earth bar disconnect link
EBAR 18 800 x 90 x 90 18 ways earth bar disconnect link
EBAR 20 800 x 90 x 90 20 ways earth bar disconnect link
EBAR 22 900 x 90 x 90 22 ways earth bar disconnect link
EBAR 24 1050 x 90 x 90 24 ways earth bar disconnect link
EBAR 26 1050 x 90 x 90 26 ways earth bar disconnect link
EBAR 28 1250 x 90 x 90 28 ways earth bar disconnect link
EBAR 30 1250 x 90 x 90 30 ways earth bar disconnect link
Part No. Size (mm) Description
SM 10 M 10 x 35 Insulator stand off type c/w 2 studs & 3 nuts
SM 20 M 5 x 20 Insulator stand off type
SM 25 M 6 x 25 Insulator stand off type
SM 30 M 8 x 30 Insulator stand off type
SM 35 M 8 x 35 Insulator stand off type
SM 40 M 8 x 40 Insulator stand off type
SM 45 M 8 x 45 Insulator stand off type
SM 51 M 8 x 51 Insulator stand off type
SM 60 M 8 x 60 Insulator stand off type
SM 76 M 10 x 71 Insulator stand off type
24
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Copper Tape
Part No. Dimension (mm2) Stand No. / Diameter
(mm2) Remark
CT 203 20 x 3 60
Material : Oxygen-free copper
CT 254 25 x 4 100
CT 304 30 x 4 120
CT 305 30 x 5 150
CT 404 40 x 4 160
CT 405 40 x 5 200
CT 505 50 x 5 250
CT 506 50 x 6 300
Bi-metal Earth Conductor
Part No. Diameter (mm) Length (m) Remark
SBCT 08 8 6
SBCT 10 10 6 Thickness of copper layer 0.5 mm Copper/steel SBCT 12 12 6
SBCT 14 14 6
Flat Bi-metal Tape
Part No. Dimensions
(mm) Stand No. / dia (m) Remark
FBT 50 6 X 14 6
FBT 070 6 X 20 6
FBT 095 7 X 22 6
FBT 120 7 X 27 6 Thickness of copper layer 0.5 mm Copper/steel FBT 160 7 X 32 6
FBT 180 7 X 37 6
FBT 210 8 X 37 6
25
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Bi-metal Earthing Conductor Barel (Cu/Steel) Bimetallic cable / Y/G PVC insulated (Cu/Steel) Bimetallic cableGalvanized technics.
Part No. Conductor Section
(mm2) Conductor Dia
(mm) Weight / M
(kgs) Remark
BC 16/IBC 16 16 7/1.70 0.126/0.156
BC 25/IBC 25 25 7/2.14 0.193/0.228
BC 35/IBC 35 35 7/2.50 0.273/0.323
BC 50/IBC 50 50 7/3.00 0.384/0.444 General packing : 100 meters BC 50/IBC 50 50 19/1.80 0.384/0.444
BC 70/IBC 70 70 19/2.10 0.523/0.603 Voltage of Insulator : 450/750V BC 95/IBC 95 95 19/2.50 0.742/0.842
BC 120/IBC 120 120 37/2.03 0.930/1.050
BC 150/IBC 150 150 37/2.30 1.02/1.17
BC 185/IBC 185 185 37/2.50 1.446/1.63
Copper Earth Conductor Bare copper stranded cables / Y / G PVC insulated copper cables.
Part No. Conductor Section
(mm2)
Conductor Dia (mm)
Weight / M (kgs)
Remark
CC 16/ICC 16 16 7/1.68 0.14/0.17
Cc 25/ICC 25 25 7/2.11 0.22/0.255
Cc 35/ICC 35 35 7/2.49 0.306/0.356
Cc 50/ICC50 50 7/2.97 0.438/0.498 Material : Oxygen-
Cc 70/ICC 70 70 19/2.14 0.618/0.698 free copper
Cc 95/ICC 95 95 19/2.49 0.838/0.938 tinned conductor
Cc 120/ICC 120 120 19/2.80 1.057/1.177 on request
Cc 150/ICC 150 150 37/2.25 1.34/1.49
Cc 185/ICC 185 185 37/2.49 1.65/1.834
Cc 240/ICC 240 240 37/2.84 2.14/2.371
Cc 300/ICC 300 300 61/2.49 3.564/2.854
26
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Copper Braid Wire The copper braided wire is used as flexible jointing wire of electric appliance, switch appliance, electric stove and storage battery etc. Model and Meaning Technique Performance Copper braided wire adopts super quality round copper wire or tinning soft round copper wire to be braided in multiple thread one layer or many layers. The DC electrical resistivity (20oC) of copper braided wire is lower than 0.022 .mm2/m, the DC electrical resistivity (200C) of tinning copper braided wire is lower than 0.234 .mm2/m.
CBW20 and CBWX 20
Section (mm2) Number of skeins x
threads/diameter of a single thread (mm)
Size (mm)
20 Direct Current reistance /km no
more than Calculating
weight (kg/km)
Standard Calculating The width no more
than
Thickness for
reference CBW-20 CBWX-20
16 16.59 24 x 22 x1/0.20 16 3.0 1.30 1.36 166
25 24.88 24 x 33 x1/0.20 18 3.5 0.87 0.91 249
35 33.18 24 x 44 x1/0.20 20 4.0 0.65 0.68 331
50 49.77 24 x 33 x2/0.20 22 5.0 0.43 0.45 198
70 66.36 24 x 44 x2/0.20 24 6.5 0.32 0.33 664
95 90.49 24 x 40 x3/0.20 20 - 0.24 0.25 905
120 120.55 24 x 40 x4/0.20 22 - 0.18 0.19 1207
150 150.82 24 x 40 x 5/0.20 24 - 0.14 0.15 1508
185 180.98 24 x 40 x 6/0.20 26 - 0.12 0.13 1810
240 241.31 24 x 40 x 8/0.20 30 - 0.089 0.093 2413
300 301.63 24 x 40 x 10/0.20 35 - 0.071 0.075 3016
400 401.17 24 x 40 x 10/0.20 + 36 x 44 x 2/0.20 40 - 0.054 0.056 4004
500 500.65 24 x 40 x 10/0.20 + 48 x 44 x 3/0.20 45 - 0.043 0.045 5007
630 633.43 24 x 40 x 10/0.20 + 48 x 44 x 5/0.20 50 - 0.034 0.036 6334
27
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Copper Braided Shunt
These connectors manufactured from highly flexible, which are braided from annealed Cu. The best alternative to cable, no cutting, no crimping, flexible, pre-punched, ready to use, quick and easy to install. Solidified pressed contact areas Ametal Alloyed Leadfree Solder Solidified Contact Areas Technical data Braids : 0.20 mm annealed Cu-ETP wires, uncoated or tinned Insulation : Special vinyl compound Max. working temperature 1050C Self extinguishable: UL 94 VO Dielectric strength : 20 kV/mm Max. working voltage : 1000V AC 1500 V DC
28
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Part No. Cross secretary
(mm2)
Dimensions
Red Copper Tinned Copper L
mm L1
mm L2
mm L3
mm L4
mm L5
mm W
mm T
mm K
mm G
mm D1
mm D2
mm
BS 025- 230- 10-8 BST 025- 230- 10-8 25 230 25 25 11 7 248 20 3.2 7 23 10 8.5
BS 025- 330- 10-8 BST 025- 330- 10-8 25 330 25 25 11 7 348 20 3.2 7 23 10 8.5
BS 025- 430- 10-8 BST 025- 430- 10-8 25 430 25 25 11 7 448 20 3.2 7 23 10.5 8.5
BS 025- 530- 10-8 BST 025- 530- 10-8 25 530 25 25 11 7 548 20 3.2 7 23 10.5 8.5
BS 025- 630- 10-8 BST 025- 630- 10-8 25 630 25 25 11 7 648 20 3.2 7 23 10.5 8.5
BS 025- 230- 10-8 BST 025- 230- 10-8 25 230 25 25 11 7 248 20 4.2 7 23 10.5 8.5
BS 035- 330- 10-8 BST 035- 330- 10-8 35 330 25 25 11 7 348 20 4.2 7 23 10.5 8.5
BS 035- 430- 10-8 BST 035- 430- 10-8 35 430 25 25 11 7 448 20 4.2 7 23 10.5 8.5
BS 035- 530- 10-8 BST 035- 530- 10-8 35 530 25 25 11 7 548 20 4.2 7 23 10.5 8.5
BS 035- 630- 10-8 BST 035- 630- 10-8 35 630 25 25 11 7 648 20 4.2 7 23 10.5 8.5
BS 035- 230- 10-8 BST 035- 230- 10-8 35 230 25 25 11 7 252 20 5 7.5 23 10.5 8.5
BS 050- 330- 10-8 BST 050- 330- 10-8 50 330 25 25 11 7 352 20 5 7.5 23 10.5 8.5
BS 050- 430- 10-8 BST 050- 430- 10-8 50 430 25 25 11 7 452 20 5 7.5 23 10.5 8.5
BS 050- 530- 10-8 BST 050- 530- 10-8 50 530 25 25 11 7 552 20 5 7.5 23 10.5 8.5
BS 050- 630- 10-8 BST 050- 630- 10-8 50 630 25 25 11 11 652 20 5 7.5 23 10.5 10.5
BS 050- 230- 10-8 BST 050- 230- 10-8 50 230 25 25 11 11 252 20 6.8 8.5 23 10.5 10.5
BS 070- 330- 10-10 BST 070- 330- 10-10 70 330 25 25 11 11 352 20 6.8 8.5 23 10.5 10.5
BS 070- 430- 10-10 BST 070- 430- 10-10 70 430 25 25 11 11 452 20 6.8 8.5 23 10.5 10.5
BS 070- 530- 10-10 BST 070- 530- 10-10 70 530 25 25 11 11 552 20 6.8 8.5 23 10.5 10.5
BS 070- 630- 10-10 BST 070- 630- 10-10 70 630 25 25 11 11 652 20 6.8 8.5 23 10.5 10.5
BS 070- 230- 10-10 BST 070- 230- 10-10 70 230 25 25 11 11 252 25 7.5 8.5 28 10.5 10.5
BS 095- 330- 10-10 BST 095- 330- 10-10 95 330 25 25 11 11 352 25 7.5 8.5 28 10.5 10.5
BS 095- 430- 10-10 BST 095- 430- 10-10 95 430 25 25 11 11 452 25 7.5 8.5 28 10.5 10.5
BS 095- 530- 10-10 BST 095- 530- 10-10 95 530 25 25 11 11 552 25 7.5 8.5 28 10.5 10.5
BS 095- 630- 10-10 BST 095- 630- 10-10 95 630 25 25 11 11 652 25 7.5 8.5 28 10.5 10.5
BS 120- 330- 10-10 BST 120- 330- 10-10 120 330 30 30 11 14 355 30 7.5 12.5 28 10.5 10.5
BS 120- 430- 10-10 BST 120- 430- 10-10 120 430 30 30 11 14 455 30 7.5 12.5 28 10.5 10.5
BS 120- 530- 10-10 BST 120- 530- 10-10 120 530 30 30 11 14 555 30 7.5 12.5 28 10.5 10.5 BS 120- 630- 10-10 BST 120- 630- 10-10 120 630 30 30 11 14 655 30 7.5 12.5 28 10.5 10.5
BS 120- 730- 10-10 BST 120- 730- 10-10 120 730 30 30 11 14 755 30 7.5 12.5 28 10.5 10.5
BS 120- 830- 10-10 BST 120- 830- 10-10 120 830 30 30 11 14 855 30 7.5 12.5 28 10.5 10.5
BS 150- 330- 10-12 BST 150- 330- 10-12 150 330 30 30 14 14 355 30 10 15 34 12.5 12.5
BS 150- 430- 10-12 BST 150- 430- 10-12 150 430 30 30 14 14 455 30 10 15 34 12.5 12.5
BS 150- 530- 10-12 BST 150- 530- 10-12 150 530 30 30 14 14 555 30 10 15 34 12.5 12.5
BS 150- 630- 10-12 BST 150- 630- 10-12 150 630 30 30 14 14 655 30 10 15 34 12.5 12.5
BS 150- 730- 10-12 BST 150- 730- 10-12 150 730 30 30 14 14 755 30 10 15 34 12.5 12.5
BS 150- 830- 10-12 BST 150- 830- 10-12 150 830 30 30 14 14 855 30 10 15 34 12.5 12.5
BS 185- 330- 10-12 BST 185- 330- 10-12 185 330 30 30 14 14 355 30 11 15 34 12.5 12.5
BS 185- 430- 10-12 BST 185- 430- 10-12 185 430 30 30 14 14 455 30 11 15 34 12.5 12.5
BS 185- 530- 10-12 BST 185- 530- 10-12 185 530 30 30 14 14 555 30 11 15 34 12.5 12.5
BS 185- 630- 10-12 BST 185- 630- 10-12 185 630 30 30 14 14 655 30 11 15 34 12.5 12.5
BS 185- 730- 10-12 BST 185- 730- 10-12 185 730 30 30 14 14 755 30 11 15 34 12.5 12.5
BS 185- 830- 10-12 BST 185- 830- 10-12 185 830 30 30 14 14 855 30 11 15 34 12.5 12.5
BS 240- 330- 10-12 BST 240- 330- 10-12 240 330 30 30 14 14 355 30 13 17 34 12.5 12.5
BS 240- 430- 10-12 BST 240- 430- 10-12 240 430 30 30 14 14 455 30 13 17 34 12.5 12.5
BS 240- 530- 10-12 BST 240- 530- 10-12 240 530 30 30 14 14 555 30 13 17 34 12.5 12.5
BS 240- 630- 10-12 BST 240- 630- 10-12 240 630 30 30 14 14 655 30 13 17 34 12.5 12.5
BS 240- 730- 10-12 BST 240- 730- 10-12 240 730 30 30 14 14 755 30 13 17 34 12.5 12.5
BS 240- 830- 10-12 BST 240- 830- 10-12 240 830 30 30 14 14 855 30 13 17 34 12.5 12.5
29
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Grounding Braid
Earthing Tapes With Solder Pressed Contact Areas
Earthing Tapes With Ametal Alloyed Leadfree Solder Solidified Contact Areas
Part No. Tinned Copper Section (mm2)
Wire Diameter
Dimensions
A mm
B mm
C mm
D mm
S mm
L mm
TZ 6 - 75/010/07 TZX 6 - 75/010/07 6 0.10 13 11 5 7 2.0 75
TZ 6 - 100/010/07 TZX 6 - 100/010/07 6 0.10 13 11 5 7 2.0 100
TZ 6 - 150/010/07 TZX 6 - 150/010/07 6 0.10 13 11 5 7 2.0 150
TZ 6 - 200/010/07 TZX 6 - 200/010/07 6 0.10 13 11 5 7 2.0 200
TZ 10 - 100/020/09 TZX 10 - 100/020/09 10 0.15 23 17 10 9 2.0 100
TZ 10 - 150/020/09 TZX 10 - 150/020/09 10 0.15 23 17 10 9 2.0 150
TZ 10 - 200/020/09 TZX 10 - 200/020/09 10 0.15 23 17 10 9 2.0 200
TZ 10 - 250/020/09 TZX 10 - 250/020/09 10 0.15 23 17 10 9 2.0 250
TZ 10 - 300/020/09 TZX 10 - 300/020/09 10 0.15 23 17 10 9 2.0 300
TZ 16 - 100/020/09 TZX 16 - 100/020/09 16 0.20 23 17 10 9 2.5 100
TZ 16 - 200/020/09 TZX 16 - 200/020/09 16 0.20 23 17 10 9 2.5 200
TZ 16 - 250/020/09 TZX 16 - 250/020/09 16 0.20 23 17 10 9 2.5 250
TZ 16 - 300/020/09 TZX 16 - 300/020/09 16 0.20 23 17 10 9 2.5 300
TZ 16 - 350/020/09 TZX 16- 350/020/09 16 0.20 23 23 10 9 2.5 350
TZ 16 - 400/020/09 TZX 16 - 400/020/09 16 0.20 23 23 10 9 2.5 400
TZ 25 - 100/020/09 TZX 25 - 100/020/09 25 0.20 23 17 10 9 3.2 100
TZ 25 - 200/020/09 TZX 25 - 200/020/09 25 0.20 23 17 10 9 3.2 200
TZ 25 - 300/020/09 TZX 25 - 300/020/09 25 0.20 23 17 10 9 3.2 300
TZ 25 - 400/020/09 TZX 25 - 400/020/09 25 0.20 23 17 10 9 3.2 400
TZ 35 - 100/020/09 TZX 35 - 100/020/09 35 0.20 23 23 10 9 3.4 100
TZ 35 - 200/020/09 TZX 35 - 200/020/09 35 0.20 23 23 10 9 3.4 200
TZ 35 - 300/020/09 TZX 35 - 300/020/09 35 0.20 23 23 10 9 3.4 300
TZ 35 - 400/020/09 TZX 35 - 400/020/09 35 0.20 23 23 10 9 3.4 400
TZ 50 - 100/020/11 TZX 50 - 100/020/11 50 0.20 30 23 10 9 4.5 100
TZ 50 - 200/020/11 TZX 50 - 200/020/11 50 0.20 30 30 15 11 4.5 200
TZ 50 - 300/020/11 TZX 50 - 300/020/11 50 0.20 30 30 15 11 4.5 300
TZ 50 - 400/020/11 TZX 50 - 400/020/11 50 0.20 30 30 15 11 4.5 400
TZ 75 - 200/020/11 TZX 75 - 200/020/11 75 0.20 30 30 15 11 5.0 200
TZ 75 - 300/020/11 TZX 75 - 300/020/11 75 0.20 30 35 15 11 5.0 300
TZ 75 - 400/020/11 TZX 75 - 400/020/11 75 0.20 30 35 15 11 5.0 400
TZ 95 - 200/020/13 TZX 95 - 200/020/13 100 0.20 35 35 15 13 6.0 200
TZ 95 - 250/020/13 TZX 95 - 250/020/13 100 0.20 35 35 15 13 6.0 250
TZ 95 - 400/020/13 TZX 95 - 400/020/13 100 0.20 35 35 15 13 6.0 400
TZ 95 - 400/020/13 TZX 95 - 400/020/13 100 0.20 35 35 15 13 6.0 700
30
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Round Flexible Copper Wire
Standard Section (mm2)
Calculating Section (mm2)
Size (mm) Calculating
external diameter
(mm)
20 Direct Current reistance /km no
more than Calculating weight (kg/km)
Total
Number of skeins x threads/diameter of a single thread
(mm)
CBW-20 CBWX-20
1.5 1.57 408 12 x 34/0.07 1.97 11.70 12.6 14.8
2.5 2.49 646 19 x 34/0.07 2.35 7.41 7.96 23.7
4 4.03 513 19 x 27/0.10 3.08 4.58 4.79 38.3
6. 3 6.27 798 19 x 42/0.10 3.73 2.94 3.07 59.6
10 10.00 1273 19 x 67/0.10 4.73 1.85 1.93 95.1
16 15.83 2016 12 x 7 x 24/0.10 7.18 1.15 1.21 150
25 25.07 3192 19 x 7 x 24/0.10 8.55 0.736 0.769 238
(35) 34.47 4389 19 x 7 x 33/0.10 9.90 0.535 0.559 328
40 39.96 2261 19 x 7 x 17/0.15 11.03 0.462 0.483 380
(50) 49.36 2793 19 x 7 x 21/0.15 12.15 0.374 0.391 470
63 63.46 3591 19 x 7 x 27/0.15 13.50 0.291 0.304 604
(70) 70.51 3990 19 x 7 x 30/0.15 14.18 0.252 0.274 671
80 79.91 4522 19 x 7 x 34/0.15 15.08 0.231 0.241 760
(95) 94.01 5320 19 x 7 x 40/0.15 16.43 0.195 0.205 894
100 10.73 5700 19 x 7 x 25/0.15 18.27 0.183 0.191 958
(120) 120.87 6840 19 x 7 x 30/0.15 20.24 0.153 0.160 1150
125 127.59 7220 19 x 19 x 20/0.15 20.29 0.145 0.152 1214
160 159.49 9025 19 x 19 x 25/0.15 21.75 0.116 0.121 1517
(185) 185.00 10469 19 x 19 x 29/0.15 23.25 0.0997 0.104 1760
200 196.15 11100 37 x 12 x 25/0.15 25.58 0.0940 0.0982 1866
250 251.08 41208 37 x 12 x 32/0.15 28.57 0.0735 0.0768 2388
315 310.58 17575 37 x 19 x 25/0.15 30.45 0.0594 0.0621 2954
400 397.54 22496 37 x 19 x 32/0.15 34.13 0.0464 0.0485 3782
500 496.92 28120 37 x 19 x 40/0.15 38.06 0.0371 0.0388 4727
31
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Brailed Flexible Connector Pressed copper connectors, tin coated on request. Single wire diameter : 0.20 standard 0.10 on request
Red copper Tinned copper
Section (mm)
A (mm)
B (mm)
S (mm)
L (mm)
Holes D Terminal Drill
Current flow
CRS 100 CSS 100 100 40 40 5 200 13 W1 480
CRS 150 CSS 150 150 40 40 7 250 13 W1 590
CRS 200 CSS 200 200 50 50 7 350 13 W1 760
CRS 250 CSS 250 250 50 50 9 350 13 W1 910
CRS 300 CSS 300 300 100 50 10 400 13 W2 950
CRS 400 CSS 400 400 100 50 12 400 13 W2 1020
CRS 500 CSS 500 500 100 50 16 400 13 W2 1300
CRS 600 CSS 600 600 100 60 16 400 13 W2 1500
CRS 800 CSS 800 800 80 80 16 400 13 W4 1700
CRS 1000 CSS 1000 1000 100 100 17 450 13 W5 1900
CRS 1200 CSS 1200 1200 120 120 17 450 13 W7 2150
CRS 1500 CSS 1500 1500 On request
CRS 2000 CSS 2000 2000
Widths, lengths, cross-sections and bores are not included in table above, they are provided at request. An information concerning current flow is not binding, the values. Shown above are approximate values.
Standard drillings
32
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Flexible Insulated Bars Flexible insulated bars are made of high Flexibility laminated copper layers, coated with black coloured, selfextinguishable insulating PUV compound.
Technical Characteristic Laminated Copper Strips Electrolytic copper annealed Cu ETP (state): 99.9% Cu.
Resistivity : 1.78 cm2 / cm
Vickers hardness : < 50 HV
Maximum tensile strength > 200/MM2
Elongation > 30%
Dimensions (mm)
Section (mm)
Current-load Dimensions
(mm) Section (mm)
Current-load
t 20C t 40C t 50C t 20C t 40C t 50C
15.5 x 0.8 x 2 24.8 125 175 200 40 x 1 x 2 80 240 330 380
15.5 x 0.8 x 3 37.2 160 210 240 40 x 1 x 3 120 330 450 540
15.5 x 0.8 x 4 49.6 195 265 295 40 x 1 x 4 160 400 560 630
15.5 x 0.8 x 6 74.4 225 320 360 40 x 1 x 5 200 450 630 710
15.5 x 0.8 x 8 99.2 165 380 430 40 x 1 x 6 240 480 680 750
15.5 x 0.8 x 10 124 300 420 480 40 x 1 x 8 320 600 830 920
40 x 1 x 10 400 670 920 1030
20 x 1 x 2 40 170 240 270
20 x 1 x 3 60 230 320 360 50 x 1 x 3 150 400 570 650
20 x 1 x 4 80 270 380 440 50 x 1 x 4 200 490 700 790
20 x 1 x 5 100 300 430 490 50 x 1 x 5 250 540 780 880
20 x 1 x 6 120 330 470 530 50 x 1 x 6 300 690 840 950
20 x 1 x 8 160 400 560 620 50 x 1 x 8 400 680 1000 1130
20 x 1 x 10 200 420 580 650 50 x 1 x 10 500 750 1100 1300
24 x 1 x 2 48 200 280 320 63 x 1 x 5 315 650 900 1000
24 x 1 x 3 72 250 360 410 63 x 1 x 6 378 690 950 1100
24 x 1 x 4 96 280 410 460 63 x 1 x 8 504 840 1200 1350
24 x 1 x 5 120 330 170 530 63 x 1 x 10 630 920 1300 1450
24 x 1 x 6 144 360 510 570
24 x 1 x 8 192 420 590 670 80 x 1 x 5 315 650 900 1000
24 x 1 x 10 240 500 700 790 80 x 1 x 6 378 690 980 1100
80 x 1 x 8 504 840 1200 1350
32 x 1 x 2 64 230 320 360 80 x 1 x 10 630 920 1300 1450
32 x 1 x 3 96 280 410 460
32 x 1 x 4 126 320 460 520 100 x 1 x 5 500 860 1250 1400
32 x 1 x 5 160 390 550 610 100 x 1 x 6 600 950 1380 1530
32 x 1 x 6 192 440 620 700 100 x 1 x 8 800 1100 1580 1760
32 x 1 x 5 256 510 720 800 100 x 1 x 10 1000 1220 1710 1920
32 x 1 x 10 320 600 840 930 100 x 1 x 12 1200 1300 1800 2010
32 x 1 x 10 320 600 840 930 100 x 1 x 12 1200 1300 1800 2010
33
LAMDA ELECTRIC
Earthing and Lightning Protection
PT. Lamda Teknologi Indonesia Komplek Ruko Taman Yasmin Sector VI No. 76 Jl. Ring Road Utara Taman Yasmin Bogor 16310 Telp/Fax : 0251-7155452 / 0251-8384529 Email : [email protected]
Press Welded Flexible Connector
Press welding can only be performed on red copper and it depends on its dimensions and customers specifications. The laminated sections are compressed and reconstructed by block during the terminal phase. via use of high currents. The contact resistance between each lamina is almost zero. Contact areas : PWR press welded. Copper strips : 0.1 mm thick witcover sheet 0.3 mm. It is also possible to deliver contact areas with tinned or silvered design.
Red copper Section (mm)
A (mm)
B (mm)
S (mm)
L (mm)
Holes D (mm)
Terminal drill
Current flow A
PWR 200/180/40 200 50 40 5 180 13 W1 600
PWR 200/230/40 200 50 40 5 230 13 W1 600
PWR 320/230/40 320 50 43 8 230 13 W1 800
PWR 400/230/40 400 50 45 10 230 13 W1 900
PWR 250/250/50 250 60 45 5 250 13 W1 700
PWR 400/250/50 400 60 48 8 250 13 W1 950
PWR 500/250/50 500 60 50 10 250 13 W1 1100
PWR 480/300/60 480 90 70 8 300 13 W2 1100
PWR 600/300/60 600 90 70 10 300 13 W2 1200
PWR 640/300/80 640 90 70 8 300 13 W4 1350
PWR 800/300/100 800 90 70 10 300 13 W4 1500
PWR 960/300/80 960 90 70 12 300 13 W4 1700
PWR 800/350/100 800 110 80 8 350 13 W5 15550
PWR 1000/350/100 1000 110 80 10 350 13 W5 1800
PWR 1200/350/120 1200 110 80 12 350 13 W5 1900
PWR 1200/400/120 1200 130 80 10 400 13 W7 2000
PWR 1440/400/120 1440 130 80 12 400 13 W7 2200