Earth Resistivity Meter: RM1 www.pasisrl.it Main features • 24-bit Sigma-Delta ADC + oversampling for noise reduction • High resolution: 2nV - 1nA • A.I. (Artificial Intelligence) function with automatic setting of all acquisition parameters (V, I, Te, T0, Ti, etc.) • Standard deviation setting (σ) to optimize measurement accuracy and acquisition times • Internal > 5000 measurements (standard version) • Electrical Resistivity Tomography function (ERT) - 32 el. (optional) • USB data transfer • Internal battery autonomy: > 1300 continuous measurements (electrical tomography); more than 40h works in SEV mode • Power supply from external power bank (optional) or PC (via USB) • Automatic Filtering – oversampling – 50/60 Hz noise removal • Noise reduction with stacking and average of the acquired values • Autocalibration at start-up • Connects to any external energy source - max.1000V-1A (5A opt.) • Light compact PELI IP 67 case - 270x246x123mm - 2.9kg GEOPHYSICS Methodology • Vertical Electrical Soundings (VES) • Electrical Profiling (EP) • Self Potential (SP) • Induce Polarization (IP) • Electrical Resistivity Tomogra- phy (ERT, Electrical Imaging ) Applications • water surveys of the subsoil to shallow, medium and great depths • geological stratigraphy, landslide studies, etc. • groundwater contamination by salt water and / or pollutants • subsoil cavities detection • mining (sulphides, etc.) • archaeology RM1 is a compact versatile earth resistivity meter with 24 bit data acquisition. All parameters in “stand alone” mode can easily be set using the console keyboard, even in harsh environmental conditions; connect the RM1 to your laptop via the dedicated acquisition software, and use the taylor-made measuring session (VES/ERT) to organize your in-field sessions quickly and efficiently. (ES) Equipements Scientifiques SA - Département Bio-tests & Industries - 127 rue de Buzenval BP 26 - 92380 Garches Tél. 01 47 95 99 90 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Earth Resistivity Meter: RM1
www.pasisrl.it
Main features • 24-bit Sigma-Delta ADC + oversampling for noise reduction
• High resolution: 2nV - 1nA
• A.I. (Artificial Intelligence) function with automatic setting of all acquisition parameters(V, I, Te, T0, Ti, etc.)
• Standard deviation setting (σ) to optimize measurement accuracy and acquisition times
• Internal > 5000 measurements (standard version)
• Electrical Resistivity Tomography function (ERT) - 32 el. (optional)
• USB data transfer
• Internal battery autonomy: > 1300 continuous measurements (electrical tomography); morethan 40h works in SEV mode
• Power supply from external power bank (optional) or PC (via USB)
Technical specifications A-B (C1-C2) Current CircuitSWITCHING SECTION Insulation: 2500 V galvanic insulation from M-N Unit and USB Max. Switching Voltage: 1000 V (2000 Vpp) Max. Switching Current: Autoranging 1 A (2000 mApp), optional 5 A Fully protected with Diagnostic: Input Overvoltage (Power Unit supplies more than 1000 V)
Bad Polarity (Power Unit wrong connection) Internal Fuse blown Output Overcurrent (short on A-B electrodes or similar)
CURRENT MEASURING SECTION Technology: High Resolution 24 bit SigmaDelta ADC
Oversampling for noise reduction High rejection for 50 and 60 Hz noise
Maximum Measurable Current: 5A (10000 mApp) Theoretical Resolution: 1 nA
M-N (P1-P2) Potential CircuitInsulation: 2500 V galvanic isolation from A-B Unit and USB Technology: High Resolution 24 bit SigmaDelta ADC
Oversampling for noise reduction High rejection for 50 and 60 Hz noise Automatic ranging
Maximum Applicable Voltage: +/-1500 V Maximum Measurable Voltage: +/-250 V (500 Vpp) Theoretical Resolution: 2 nV Input Impedance 10 MOhm
System
Technology: Solid State (no moving parts) High Performance 32 bit Microprocessor
Display: Graphical Transflective LCD with white Led backlight Work mode: Stand-alone or PC connected on USB
Artificial Intelligence for the best setting of all measurement parameters Power Supply: Internal lithium battery rechargeable via USB connector Measure results: VMN, IAB, VMN/IAB, Resistivity, Self Potential, Induced Polarization Dynamic Automatic set of all Parameters: Input Ranges, Current Pulse Length, Integration Intervals,
Number of Stackings, Power Unit Voltage Output (only if connected to a compatible PASI device)
Precision: Better than 0.5% Better than 0.1% in the range 1 – 1000 Ohm
Case: Shock resistant PELI case IP 67 (270x246x123 mm - 2.9 kg) Ambient Working Temperature Range: from -10°C to 50°C, Storage Temperature Range: from -20°C to +80°C
Specifications may be modified without notice
In addition to stand alone mode, RM1 can be connected to an external laptop PC thanks to its bundle software for Windows 7 (or later version), allowing you to prepare VES tables (Wenner, Schlumberger, Dipole-Dipole soundings, etc.) and also custom-ized measuring sessions (VES/ERT).
RM1 is compatible with any kind of external energizer – max. 1.000V - 1A (optional 5A)
(ES) Equipements Scientifiques SA - Département Bio-tests & Industries - 127 rue de Buzenval BP 26 - 92380 GarchesTél. 01 47 95 99 90 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com
The P200 energizer is the perfect energy source for vertical sounding. Connect to an external 12V battery (not supplied), for a 20V to 200V supply, max 1A, in continuous current. Up to 5 units can be connected in series to the same external battery of appropriate capacity. Designed to complete the RM1 earth resistivity meter, the P200 is compatible with all P.A.S.I. geoelectrical instruments.
How to serialize your Energizers 3xP200 for a total of 600V/1000mA
Technical specifications • Output voltage from 20-200 V
• Output current guaranteed 1000 mA
• Indication of battery charge on three levels
• Resettable electronic protection from currentoverload
• Resettable electronic protection from shortcircuit