Expansion joints Fabric expansion joints Fluachem expansion joints Features Single-layered design High flexibility For wet or dry conditions Minimum reactive forces Robust designs allowing direct abrasion Can be designed for abrasive and other corrosive media For gas media installations with very low pressure 100 % gas tight Available with Neka l-tight de sign Drainage nozzle available Advantages Proven technology Tailor-made to specific requirements Applicab le where acid load is high Easy to transport, install and store Require little space for installation One supplier and one shipment of fabric expansion joint an steel frames Risk of incorrect installation is low, when fabric expansion joint and steel frames are pre-assembled Ite m Desc riptio n 1 Frames 2 Expansion joint 3 Clamp bar 4 Gasket Fluachem expansion joints (1) 26.09.2013 © EagleBurgmann EagleBurgmann KE A/S Park Allé 34 6600 Vejen Denmark Tel: +45 753 61 811 Fax: +45 753 61 532 [email protected] http://eagleburgmann-ej.com All technical specifications are based on extensive test s and our many years of experience. The diversity of possible applications means, however, that they can serve only as guide values. We must be notified of the exact conditions of application before we can provide any guarantee for a specific case. Subject to change.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
7/18/2019 EagleBurgmann_Fluachem expansion joints_EN.pdf
http://slidepdf.com/reader/full/eagleburgmannfluachem-expansion-jointsenpdf-56d616202f70c 1/4
Expansion joints
Fabric expansion joints
Fluachem
expansion joints
Features
Single-layered designHigh flexibilityFor wet or dry conditionsMinimum reactive forcesRobust designs allowing direct abrasionCan be designed for abrasive and othercorrosive media
For gas media installations with very lowpressure100 % gas tight
Available with Nekal-tight designDrainage nozzle available
Advantages
Proven technologyTailor-made to specific requirements
Applicable where acid load is highEasy to transport, install and storeRequire little space for installationOne supplier and one shipment of fabricexpansion joint an steel frames
Risk of incorrect installation is low, whenfabric expansion joint and steel frames arepre-assembled
Item Description
1 Frames
2 Expansion joint3 Clamp bar
4 Gasket
Fluachem expansion joints (1)26.09.2013 © EagleBurgmann
EagleBurgmann KE A/S Park Allé 346600 VejenDenmark
Tel: +45 753 61 811Fax: +45 753 61 [email protected]://eagleburgmann-ej.com
All technical specifications are based on extensive tests and our many years ofexperience. The diversity of possible applications means, however, that they canserve only as guide values. We must be notified of the exact conditions ofapplication before we can provide any guarantee for a specific case. Subject tochange.
7/18/2019 EagleBurgmann_Fluachem expansion joints_EN.pdf
http://slidepdf.com/reader/full/eagleburgmannfluachem-expansion-jointsenpdf-56d616202f70c 2/4
Operating range
Temperature: -35 °C … +300 °C (30 °F ... +570 °F)Pressure: -0.35 … 0.35 bar (-5 ... 5 PSI)Maximal axial movements: … 200 mm (8”)Maximal lateral movements: … 40 mm (1 1/2”)
Recommended applications
Chemical industryPower plant technologyRefining technologyMetal production and processingConventional boilersFlue gas duct systemsCondensersFiltration / precipitatorsScrubbers / absorbersChemical reactorsStack, chimney solutions
Functional description
Fluachem expansion joints are applied in channels and compensate for misalignments, vibrationsand for movements in several directions simultaneously.
Standards and approvals
Documentation:- EN 10204-2.2 certificate- Safety Data Sheets (SDS) for individual materials
Installation, Details, Options
Fluachem product properties
TypeMedium: Aggressive
TemperaturePressure Flexibility
P-flange V-flange
No Yes Max. Max. Min. Max. Min. Axial Lateral
Butyl 600GS Wet Wet 80 °C(176 °F) 80 °C(176 °F) -35 °C(-31 °F) 0.35 bar(5 PSI) -0.35 bar(-5 PSI) 25 % 13 %
EPDM 400G Wet Wet 120 °C(248 °F)
120 °C(248 °F)
-35 °C(-31 °F)
0.35 bar(5 PSI)
-0.35 bar(-5 PSI)
35 % 18 %
EPDM 600GG Wet Wet 120 °C(248 °F)
120 °C(248 °F)
-35 °C(-31 °F)
0.35 bar(5 PSI)
-0.35 bar(-5 PSI)
25 % 13 %
EPDM 600S Wet Wet 120 °C(248 °F)
120 °C(248 °F)
-35 °C(-31 °F)
0.35 bar(5 PSI)
-0.35 bar(-5 PSI)
25 % 13 %
FKM 320G Wet Wet 200 °C(392 °F)
200 °C(392 °F)
-25 °C(-13 °F)
0.2 bar(2.9 PSI)
-0.2 bar(-2.9 PSI)
35 % 18 %
FKM 350S Wet Wet 200 °C(392 °F)
200 °C(392 °F)
-25 °C(-13 °F)
0.35 bar(5 PSI)
-0.35 bar(-5 PSI)
25 % 18 %
FKM 450GS Wet Wet 200 °C
(392 °F)
200 °C
(392 °F)
-25 °C
(-13 F)
0.35 bar
(5 PSI)
-0.35 bar
(-5 PSI)
30 % 15 %
FKM 600GG Wet Wet 200 °C(392 °F)
200 °C(392 °F)
-25 °C(-13 °F)
0.35 bar(5 PSI)
-0.35 bar(-5 PSI)
25 % 13 %
FKM 600GS Wet Wet 200 °C(392 °F)
200 °C(392 °F)
-25 °C(-13 °F)
0.35 bar(5 PSI)
-0.35 bar(-5 PSI)
25 % 13 %
C Wet Wet 270 °C(518 °F)
270 °C(518 °F)
-35 °C(-31°F)
0.2 bar(2.9 PSI)
-0.2 bar(-2.9 PSI)
50 % 20 %
O Wet Wet 270 °C(518 °F)
270 °C(518 °F)
-35 °C(-31 °F)
0.2 bar(2.9 PSI)
-0.2 bar(-2.9 PSI)
50 % 20 %
HD Wet Wet 300 °C(572 °F)
300 °C(572 °F)
-35 °C(-31°F)
0.2 bar(2.9 PSI)
-0.2 bar(-2.9 PSI)
50 % 20 %
Fluachem expansion joints (2)26.09.2013 © EagleBurgmann
EagleBurgmann KE A/S Park Allé 346600 VejenDenmark
Tel: +45 753 61 811Fax: +45 753 61 [email protected]://eagleburgmann-ej.com
All technical specifications are based on extensive tests and our many years ofexperience. The diversity of possible applications means, however, that they canserve only as guide values. We must be notified of the exact conditions ofapplication before we can provide any guarantee for a specific case. Subject tochange.
7/18/2019 EagleBurgmann_Fluachem expansion joints_EN.pdf
http://slidepdf.com/reader/full/eagleburgmannfluachem-expansion-jointsenpdf-56d616202f70c 3/4
V-Flanges elastomeric expansion joint
P-Flanges elastomeric expansion joint
V-Flanges fluoroplastic expansion joint
Fluachem expansion joints (3)26.09.2013 © EagleBurgmann
EagleBurgmann KE A/S Park Allé 346600 VejenDenmark
Tel: +45 753 61 811Fax: +45 753 61 [email protected]://eagleburgmann-ej.com
All technical specifications are based on extensive tests and our many years ofexperience. The diversity of possible applications means, however, that they canserve only as guide values. We must be notified of the exact conditions ofapplication before we can provide any guarantee for a specific case. Subject tochange.
7/18/2019 EagleBurgmann_Fluachem expansion joints_EN.pdf
http://slidepdf.com/reader/full/eagleburgmannfluachem-expansion-jointsenpdf-56d616202f70c 4/4
P-Flanges fluoroplastic expansion joint
Product variants
Pre-assembled unitsPre-assembled expansion joint units consist of
Fabric Expansion joint
Metal frames/inner sleevesGaskets (optional)Fasteners
Frame Materials:S235 (1.0038), HII (1.0425), Corten A (1.8963), 16Mo3 (1.5415), 13CrMo4-5 (1.7335),10CrMo9-10 (1.7380), 3Cr12 (1.4003), AISI 304 (1.4301), AISI 316 (1.4401), AISI 316L(1.4404), AISI 321 (1.4541), AISI 409 (1.4512), AISI 410 (1.4006).
Pre-assembled expansion joint units can be supplied with surface treatment that is corrosionresistant (standard) and resistant to high temperatures. EagleBurgmann offers any RAL colorcode for the units. Units can be delivered with seaworthy packing or standard packing for roadtransportation.
Fluachem expansion joints (4)26.09.2013 © EagleBurgmann
EagleBurgmann KE A/S Park Allé 346600 VejenDenmark
Tel: +45 753 61 811Fax: +45 753 61 [email protected]://eagleburgmann-ej.com
All technical specifications are based on extensive tests and our many years ofexperience. The diversity of possible applications means, however, that they canserve only as guide values. We must be notified of the exact conditions ofapplication before we can provide any guarantee for a specific case. Subject tochange.
Related Documents
