Eagle Scanner Receiver | Long Term Evolution (LTE) FDD / TDD Transcom’s Eagle LTE Scanner supports both TDD-LTE and FDD-LTE. This high speed scanner is used for scanning the air-interface in the mobile wireless network. Unlike user equipment, this scanner works such a way that it is independent to the network and therefore, it is highly suitable for use in network optimization. Eagle Scanner Receiver for LTE is a DSP-based software radio that is widely deployed on the field to carry out Cell Tower Site Survey, Base Station Monitoring, Wireless Coverage Analysis and Network Optimization. SD Card slots – data saving in the box Test and measurement of CW and LTE Pilot signals Measurement of reference signal such as RSSI, RP, RQ, Timing, CINR, Number of Antenna, etc. Measurement of P-SCH & S-SCH channels which includes RSSI, RP, RQ, Timing, PCI, etc. Timeslot measurement and PBCH measurement such as Constellation, EVM and BLER Powerful co-channel cell detection capability of up to 20 dB Layer 3 message decoding Main Features Indoor testing Wireless signal coverage and interference testing Test for Tuning of the Propagation Model for network planning Testing of Two module neighboring cell network handover check
2
Embed
Eagle Scanner Receiver | Long Term Evolution (LTE)trinergy.co.th/pdf/eagle_lte_scanner_pb.pdfEagle Scanner Receiver | Long Term Evolution (LTE) FDD / TDD Transcom’s Eagle LTE Scanner
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Eagle Scanner Receiver | Long Term Evolution (LTE) FDD / TDD
Transcom’s Eagle LTE Scanner supports both TDD-LTE and FDD-LTE. This high speed scanner is used for scanning the air-interface in the mobile wireless network. Unlike user equipment, this scanner works such a way that it is independent to the network and therefore, it is highly suitable for use in network optimization. Eagle Scanner Receiver for LTE is a DSP-based software radio that is widely deployed on the field to carry out Cell Tower Site Survey, Base Station Monitoring, Wireless Coverage Analysis and Network Optimization.
SD Card slots – data saving in the box
Test and measurement of CW and LTE Pilot signals
Measurement of reference signal such as RSSI, RP, RQ, Timing, CINR, Number of Antenna,
etc.
Measurement of P-SCH & S-SCH channels which includes RSSI, RP, RQ, Timing, PCI, etc.
Timeslot measurement and PBCH measurement such as Constellation, EVM and BLER
Powerful co-channel cell detection capability of up to 20 dB
Layer 3 message decoding
Main Features
Indoor testing
Wireless signal coverage and interference testing
Test for Tuning of the Propagation Model for network planning
Testing of Two module neighboring cell network handover check
Battery (option)
Battery Lithium battery, 11000 mAH Nominal Voltage 11.1 V Nominal Capacity 11 AH Internal Resistance ≤60 mΩ Charging Voltage 12.6±0.15 V Discharge Cut-off Voltage 9 V Weight 0.325 kg
Temperature Operating: -20°C to +60°C Storage: -20°C to +60°C Removable Storage (option)
Eagle LTE Scanner Receiver comes with 2 Micro SD slots for data saving on the move. Eagle Scanner Receiver - Specification Overview
RF Performance
Sensitivity, RSRP -130 dBm @20MHz (RSRP)
Accuracy ±1.0 dB SINR Dynamic Range -20 dB to +30 dB MIMO Support Yes Co-channel Cells Detection ≥20 dB
Measurement Rate
1000 channel/s (CW) @ Single RF Carrier 800 channel/s (CW) @ Single RF Carriers 12 times/s (Pilot) @ Single RF Carrier
EMAS – Eagle Measurement & Analysis System is automatic signal measurement and analysis software that can be interfaced with Eagle Scanner Receivers. It includes GPS and utilizing readily available map to create a coverage verification system that meets your requirements.
LTE – RP Measurement Location Map, Cell Coverage Statistic and Cell Coverage Analysis
In The Package Eagle Scanner base unit, Outdoor and GPS antenna, LAN cable and AC-DC Adapter. Ordering Information Eagle LTE Scanner Receiver is a dual-technology scanner with two changeable module slots.
Part Number Description
T213X TDD-LTE Scanner Module
T214X FDD-LTE Scanner Module
Base unit comes with built-in GPS module
Optional Accessories Part Number Description NT102022 Outdoor Antenna Assembly
NT102056 Scanner Battery Suite NT102012 GPS Antenna Assembly NT002808 EMAS (CD & USB Key)
NT104001 Backpack
NT102060 LAN Cable
Transcom Instruments Co., Ltd
4F Building 28, No. 69 GuiQing Road, XuHui District, Shanghai, China 200233