1 31-00308–01 e7w Wireless EMS Thermostat INSTALLATION INSTRUCTIONS FOR ALL UNITS IN CARTON. DO NOT THROW AWAY! INSTALLATION REQUIREMENTS Required Installation Hardware • Four 6-32 × 1.5” Philips Pan head screws (provided with e7w) if attaching to a 4X4 electrical junction box. • Four AA alkaline batteries; provided with e7w. • e7w Smart Wall Mounting Plate; provided with e7w. • Three 4-24 1/2’’ Phillips screws Phillips captive screws; provided with e7w. • Phillips Screwdriver. • Wire cutters/strippers. Required Commissioning Tools DO NOT THROW THIS UNIT AWAY: One PC-503 USB Commissioning Tool and USB cable per property/project is shipped to the site. This tool is used in conjunction with Honeywell's engINN commissioning software when advanced commis- sioning of the e7w is required by a trained and certified INNCOM technician. Contact Honeywell technical sup- port for more information. Figure 1: PC-503 USB commissioning tool and cable
12
Embed
e7w Wireless Thermostat Installation Instructionse7w WIRELESS EMS THERMOSTAT - INSTALLATION INSTRUCTIONS 3 31-00308–01 a. Verify that the batteries installed in cor-rect terminal.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1 31-00308–01
e7w Wireless EMS Thermostat
INSTALLATION INSTRUCTIONS
FOR ALL UNITS IN CARTON. DO NOT THROW AWAY!
INSTALLATION REQUIREMENTS
Required Installation Hardware
• Four 6-32 × 1.5” Philips Pan head screws (provided with e7w) if attaching to a 4X4 electrical junction
box.
• Four AA alkaline batteries; provided with e7w.
• e7w Smart Wall Mounting Plate; provided with e7w.
• Three 4-24 1/2’’ Phillips screws Phillips captive screws; provided with e7w.
• Phillips Screwdriver.
• Wire cutters/strippers.
Required Commissioning Tools
DO NOT THROW THIS UNIT AWAY: One PC-503 USB Commissioning Tool and USB cable per property/project
is shipped to the site.
This tool is used in conjunction with Honeywell's engINN commissioning software when advanced commis-
sioning of the e7w is required by a trained and certified INNCOM technician. Contact Honeywell technical sup-
to try to correct the interference by one of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the re-
ceiver is connected.
• Consult the dealer or an experienced ra-
dio/TV technician for help.
This device complies with FCC and IC radiation
exposure limits set forth for an uncontrolled en-
vironment. This device should be installed and
operated with minimum distance of 20cm be-
tween the radiator and your body. This device
must not be co-located or operating in conjunc-
tion with any other antenna or transmitter.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
Tout changement ou modification n’ayant pas été expressément approuvé par la partie re-sponsable de la conformité pourrait annuler l’autorisation de l’utilisateur d’utiliser l’équipe-ment. Cet équipement a subi des tests prouvant sa conformité aux limites prescrites pour les ap-pareils numériques de classe B, selon la partie 15 des règlements de la FCC. Ces limites ont été conçues pour fournir une protection raison-nable contre les interférences nuisibles lorsque l’appareil est utilisé dans un environnement ré-sidentiel. Cet équipement génère, utilise et peut émettre de l’énergie radioélectrique et, s’il n’est pas installé et utilisé conformément aux in-structions, peut causer des interférences nuisi-bles aux communications radio. Toutefois, il n’y a aucune garantie que ces interférences ne
puissent survenir dans une installation par-ticulier. Si cet équipement cause des interfé-rences nuisibles à la réception de signaux de ra-dio ou de télévision, ce qui peut être déterminé en l’éteignant et en l’allumant, l’utilisateur peut essayer de corriger ces interférences par les mesures suivantes : • Réorienter ou déplacer l’antenne récep-
trice. • Augmenter la distance entre l’équipe-
ment et le récepteur. • Brancher l’équipement sur un circuit dif-
férent de celui sur lequel le récepteur est branché.
• Consulter le détaillant ou un technicien expérimenté en radio/télévision pour de l’aide.
Cet équipement est conforme aux limites d’ex-position aux rayonnements FCC et IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. Cet appareil ne doivent pas être placés à côté de ou fonctionner en conjonction avec toute autre antenne ou transmetteur.
Industry Canada (IC)
This device complies with Industry Canada li-
cense-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'In-dustrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The material in this document is for information purposes only. The content and the product described are subject to change without notice. Honeywell makes no representations or warranties with respect to this document. In no event shall Honeywell be liable for technical or editorial omissions or mistakes in this document, nor shall it be liable for any damages, direct or incidental, arising out of or related to the use of this document. No part of this document may be reproduced in any form or by any means without prior written permission from Honeywell.
Honeywell
12 Clintonville Rd, Northford, CT 06472, USA +1.203.484.7161