604 Singapore: +65 6779 9091 [email protected] USA: +1 330 486 0001 [email protected] Germany: +49 621 776-4411 [email protected] Pepperl+Fuchs Group www.pepperl-fuchs.com Subject to modifications without notice Copyright Pepperl+Fuchs Photoelectric Sensors Photoelectric MHP Series Miniature 15.8 30 1-20 UNEF-2A Ø 3 thru (2 places) DC: M12x1 AC: 1/2"-20 Light on/dark on (if applicable) Sensitivity adjustment (if applicable) LEDs (if applicable) Red: output status Green: signal strength Amber: Power (transmitter only) 64.8 45.7 49.5 6.4 15.3 19.1 24.4 MHP-P2AL MHP-P33L MHP-P2AQ MHP-P33Q MHP-LR2AL MHP-LR33L MHP-LR2AQ MHP-LR33Q Polarization filter ● ● ● ● Sensitivity adjustment ● ● ● ● ● ● ● ● Effective detection range 0 ... 2.4 m ● ● ● ● 0 ... 9.1 m ● ● ● ● Reference target reflector ● ● ● ● ● ● ● ● Light source IRED ● ● ● ● LED ● ● ● ● Light type modulated infrared light ● ● ● ● modulated visible red light ● ● ● ● Function display LED red and LED green ● ● ● ● ● ● ● ● Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ● Operating voltage 10 ... 30 V DC ● ● ● ● 20 ... 260 V , 50 ... 60 Hz ● ● ● ● No-load supply current < 1.5 mA ● ● ● ● < 35 mA ● ● ● ● Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ● 5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ● Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ● Signal output 1 NPN and 1 PNP ● ● ● ● Thyristor ● ● ● ● Voltage drop < 1 V DC (NPN). < 2 V DC (PNP). ● ● ● ● < 6.7 V ● ● ● ● Off-state current 10 μA ● ● ● ● 1.8 mA ● ● ● ● Switching frequency 60 Hz ● ● ● ● 500 Hz ● ● ● ● Response time < 1 ms ● ● ● ● < 8 ms ● ● ● ● Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ● Protection degree IP69K ● ● ● ● ● ● ● ● Connection 2 m fixed cable, PVC ● ● 3 m fixed cable, PVC ● ● connector M12 x 1, 4-pin ● ● Micro AC connector, 1/2"; 3-pin ● ● Housing Polysulphone ● ● ● ● ● ● ● ● Optical face Polycarbonate ● ● ● ● ● ● ● ● Mass approx. 43 g (per housing) ● ● ● ● approx. 130 g (per housing) ● ● approx. 159 g (per housing) ● ● UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ● ● ● ● ● CCC approval Products with a maximum operating voltage of < 36 V do not bear a CCC marking because they do not require approval. ● ● ● ● MHP Series Miniature Sensors • Rugged IP69K housing withstands harsh environments and high-pressure washdown areas • Cable or Connector connection • AC model / DC model Technical Specifications Dimensions (mm) Retroreflective Mode 64.8 45.7 49.5 15.3 15.8 1-20 UNEF-2A 30 19.1 Ø 3 thru (2 places) Light on/dark on (if applicable) Sensitivity adjustment (if applicab LEDs (if applicable) Red: output status Green: signal strength Amber: Power (transmitter only) 24.4 MHP-LR33Q MHP-LR2AQ MHP-LR33Q MHP-LR33L MHP-P2AL MHP-LR2AL MHP-LR33L Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
604 Singapore: +65 6779 [email protected]
USA: +1 330 486 [email protected]
Germany: +49 621 [email protected]
Pepperl+Fuchs Groupwww.pepperl-fuchs.com
Subject to modifications without notice Copyright Pepperl+Fuchs
Photoelectric Sensors
Phot
oele
ctric
MH
P Se
ries
Min
iatu
re
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
15.8
30
15.8
30
15.8
30
19.1
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
DC: M12x1AC: 1/2"-20
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
DC: M12x1AC: 1/2"-20
1-20 UNEF-2A
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
24.4
64.8
45.7
49.5 6.4 6.415.3
19.1
24.4
67
45.7
49.517.5
21.3
24.4
67
45.7
49.517.5
21.3
24.4
MH
P-P2
AL
MH
P-P3
3L
MH
P-P2
AQ
MH
P-P3
3Q
MH
P-LR
2AL
MH
P-LR
33L
MH
P-LR
2AQ
MHP
-LR
33Q
Polarization filter � � � �
Sensitivity adjustment � � � � � � � �
Effective detection range 0 ... 2.4 m � � � �
0 ... 9.1 m � � � �
Reference target reflector � � � � � � � �
Light source IRED � � � �
LED � � � �
Light type modulated infrared light � � � �
modulated visible red light � � � �
Function display LED red and LED green � � � � � � � �
Controls rotary switch for light/dark, sensitivity adjuster � � � � � � � �
Operating voltage 10 ... 30 V DC � � � �
20 ... 260 V , 50 ... 60 Hz � � � �
No-load supply current < 1.5 mA � � � �
< 35 mA � � � �
Operating current 250 mA max. NPN ; 150 mA max. PNP � � � �
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C � � � �
Product standard EN 60947-5-2:2007IEC 60947-5-2:2007 � � � � � � � �
Signal output 1 NPN and 1 PNP � � � �
Thyristor � � � �
Voltage drop < 1 V DC (NPN). < 2 V DC (PNP). � � � �
< 6.7 V � � � �
Off-state current 10 µA � � � �
1.8 mA � � � �
Switching frequency 60 Hz � � � �
500 Hz � � � �
Response time < 1 ms � � � �
< 8 ms � � � �
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) � � � � � � � �
Protection degree IP69K � � � � � � � �
Connection 2 m fixed cable, PVC � �
3 m fixed cable, PVC � �
connector M12 x 1, 4-pin � �
Micro AC connector, 1/2"; 3-pin � �
Housing Polysulphone � � � � � � � �
Optical face Polycarbonate � � � � � � � �
Mass approx. 43 g (per housing) � � � �
approx. 130 g (per housing) � �
approx. 159 g (per housing) � �
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure � � � � � � � �
CCC approval Products with a maximum operating voltage of < 36 V do not bear a CCC marking because they do not require approval. � � � �
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
MHP Series Miniature Sensors
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
YOffset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas
• Cable or Connector connection• AC model / DC model
Technical Specifications
Dimensions (mm)
Retroreflective Mode
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
15.8
30
15.8
30
15.8
30
19.1
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
DC: M12x1AC: 1/2"-20
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
DC: M12x1AC: 1/2"-20
1-20 UNEF-2A
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
24.4
64.8
45.7
49.5 6.4 6.415.3
19.1
24.4
67
45.7
49.517.5
21.3
24.4
67
45.7
49.517.5
21.3
24.4
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
605Singapore: +65 6779 [email protected]
USA: +1 330 486 [email protected]
Germany: +49 621 [email protected]
Pepperl+Fuchs Groupwww.pepperl-fuchs.com
Subject to modifications without notice Copyright Pepperl+Fuchs
Photoelectric Sensors
Photoelectric MH
P Series Miniature
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
15.8
30
15.8
30
15.8
30
19.1
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
DC: M12x1AC: 1/2"-20
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
DC: M12x1AC: 1/2"-20
1-20 UNEF-2A
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
24.4
64.8
45.7
49.5 6.4 6.415.3
19.1
24.4
67
45.7
49.517.5
21.3
24.4
67
45.7
49.517.5
21.3
24.4
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
15.8
30
15.8
30
15.8
30
19.1
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
DC: M12x1AC: 1/2"-20
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
DC: M12x1AC: 1/2"-20
1-20 UNEF-2A
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
24.4
64.8
45.7
49.5 6.4 6.415.3
19.1
24.4
67
45.7
49.517.5
21.3
24.4
67
45.7
49.517.5
21.3
24.4
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Cable or Connector connection• AC model / DC model
MH
P-P
2AL
MH
P-P
33L
MH
P-P
2AQ
MH
P-P
33Q
MH
P-L
R2A
L
MH
P-L
R33
L
MH
P-L
R2A
Q
MH
P-L
R33
Q
Construction type(S2) Miniature housing ● ● ● ● ● ● ● ●
Polarization filter ● ● ● ●
Sensitivity adjustment ● ● ● ● ● ● ● ●
Effective detection range 0 ... 2.4 m ● ● ● ●
0 ... 9.1 m ● ● ● ●
Reference target Reflector ● ● ● ● ● ● ● ●
Light source IRED ● ● ● ●
LED ● ● ● ●
Light type modulated infrared light ● ● ● ●
modulated visible red light ● ● ● ●
Function display LED red and LED green ● ● ● ● ● ● ● ●
Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ● ● ●
Operating voltage 10 ... 30 V DC ● ● ● ●
20 ... 260 V , 50 ... 60 Hz ● ● ● ●
No-load supply current 1.5 mA ● ● ● ●
35 mA ● ● ● ●
Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ● ● ●
Product standard EN 60947-5-2:2007 IEC 60947-5-2:2007 ● ● ● ● ● ● ● ●
Signal output Thyristor ● ● ● ●
1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ●
6.7 V ● ● ● ●
Off-state current 10 A ● ● ● ●
1.8 mA ● ● ● ●
Switching frequency 500 Hz ● ● ● ●
60 Hz ● ● ● ●
Response time 1 ms ● ● ● ●
8 ms ● ● ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ● ● ●
Protection degree IP69K ● ● ● ● ● ● ● ●
Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ● ●
connector M12 x 1, 4-pin ● ●
Micro AC connector, 1/2" ; 3-pin ● ●
Housing Polysulphone Polysulphone ● ● ● ● ● ● ● ●
Optical face Polycarbonate ● ● ● ● ● ● ● ●
Mass approx. 130 g ● ●
approx. 159 g ● ●
approx. 43 g ● ● ● ●
UL approval cULus Listed, Class 2 Power Source, Type 1 enclosure ● ● ● ●
CSA approval cCSAus ● ● ●
CCC approval Products with a maximum operating voltage of 36 V do not bear a CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
X
Y
0
25
-25
50
-50
75
-750 1 2 3 4 5 6 7 8 9
Offset Y [mm]
Distance X [m]
Characteristic response curve
X
Y
Offset Y [mm]
Distance X [m]
Characteristic response curve
0
25
-25
50
-50
75
-750 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Distance X [m]
Stability controlRelative received light strength
1
2
3
4
5
6
7
0 0.5 1 1.5 2 2.5 3
FE-RR1Reflectors
FE-RR6
x Distance X [m]
Stability controlRelative received light strength
01020304050607080
0 1 2 3 4 5 6 7 8 9x
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-P2ALMHP-P2AQMHP-P33LMHP-P33Q
MHP-LR2ALMHP-LR2AQMHP-LR33LMHP-LR33Q
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
1-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
301-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
Wiring Diagrams
DC DCAC AC
Sensing Characteristics
Dimensions (mm)
Note: Wiring diagrams show quick disconnect pin numbers.
Quick Disconnect
V1 Type V12 Type
Cable Connection
Dimensions Drawings
Electrical Connection
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
30
DC: M12 x 1AC: 1/2" - 20
1-20 UNEF-2A
Ø 3
6.4
67
45.7
49.517.5
21.3
24.4
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
15.8
301-20 UNEF-2A
Ø 3
67
45.7
49.517.5
21.3
24.4
MHP-LR2AQMHP-LR33QMHP-P2AQMHP-P33Q
MHP-LR2ALMHP-LR33LMHP-P2ALMHP-P33L
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L1
L2
BU
BN L1
L2
WH
BN
BU
BK
+UB
Q
0 V
Q
MHP-LR33QMHP-P33Q
MHP-LR2AQMHP-P2AQ
MHP-LR2ALMHP-P2AL
MHP-LR33LMHP-P33L
1
2 3
1
3
42
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
15.8
30
15.8
30
15.8
30
19.1
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
DC: M12x1AC: 1/2"-20
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
Light on/dark onSensitivity adjustment
LEDsRed: output statusGreen: signal strength
DC: M12x1AC: 1/2"-20
1-20 UNEF-2A
Ø 3 thru (2 places)
1-20 UNEF-2A
Ø 3 thru (2 places)
24.4
64.8
45.7
49.5 6.4 6.415.3
19.1
24.4
67
45.7
49.517.5
21.3
24.4
67
45.7
49.517.5
21.3
24.4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
610 Singapore: +65 6779 [email protected]
USA: +1 330 486 [email protected]
Germany: +49 621 [email protected]
Pepperl+Fuchs Groupwww.pepperl-fuchs.com
Subject to modifications without notice Copyright Pepperl+Fuchs
Photoelectric Sensors
Phot
oele
ctric
MH
P Se
ries
Min
iatu
re
(Dimensions in mm)
See pages 1009-1076for cordsets
See pages 895-912 for reflectors
See pages 1105-1128 for accessories
Accessories
Panel Mount Bracket Model MHPTB
25.4
38.125.4
44.5 R
12.7
20°
20°
20°
20°
25.4
12.7
Mounting Kit Model MHPHDW
(included with all non-fiber MHP Series sensors)
Kit includes (1) locknut, (1) O-ring, (2) 1.25” length screws, (2) nuts,
and (2) washers.
Side Mount Bracket Model MHPSB
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Related Documents
![Mhp Gold The Automated Mhp Mgr[1].Revised](https://static.cupdf.com/doc/110x72/55c343e3bb61ebe9438b45a3/mhp-gold-the-automated-mhp-mgr1revised-55c4568e3551f.jpg)
