DATASHEET DB4100-E Issue C Page 1 of 5 Descripon The patch cords can be delivered as: Pigtail, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in one end. Patch cord, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in both ends. One patch cord cut in half makes two pigtails. Patch cord, 2.0 mm 1-fiber cable (2.0 mm) with connector in both ends. Duplex patch cord, 2.0 mm 2-fiber cable (2.0 mm, figure 8) with two connectors in each end. The SC and LC connectors are aached with clips. *Secondary coated fibre is ght buffered fibre, providing around 100 mm strip length. Specificaons Fibre type: ITU-T G.657.A1 compable with G.652.D OS-2 EN 50173-1, yellow Cable: Flame retardant, Zero halogen IEC 60332-3-24, 60332-1-2, 60754-1 Operang wavelength: 1260 - 1625 nm Operang temperature: -40 °C to 60 °C Addional loss with fibre bend: <0,05 dB v/1550 nm 10 turns with radius 15 mm <0,5 dB v/1550 nm 1 turn with radius 10 mm Patch cords for use in all parts of the network, through the full CWDM and DWDM ranges. Can be delivered with most connector types. PC or APC polish. Using bend insensive fibre (G.657.A1). Delivered in customer specified lengths. Patch cords - single mode
13
Embed
E Issue Page 1 of 5 Patch cords single mode52ebad10ee97eea25d5e-d7d40819259e7d3022d9ad53e3694148.r84… · Pigtail, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in one end.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DATASHEET DB4100-E Issue C Page 1 of 5
Description
The patch cords can be delivered as:
Pigtail, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in one end.
Patch cord, 0.9 mm Secondary coated fibre* (0.9 mm) with connector in both ends. One patch cord cut in half makes two
pigtails.
Patch cord, 2.0 mm 1-fiber cable (2.0 mm) with connector in both ends.
Duplex patch cord, 2.0 mm 2-fiber cable (2.0 mm, figure 8) with two connectors in each end. The SC and LC connectors are
attached with clips. *Secondary coated fibre is tight buffered fibre, providing around 100 mm strip length.
Specifications Fibre type: ITU-T G.657.A1 compatible with G.652.D
OS-2 EN 50173-1, yellow
Cable: Flame retardant, Zero halogen IEC 60332-3-24, 60332-1-2, 60754-1
Operating wavelength: 1260 - 1625 nm
Operating temperature: -40 °C to 60 °C
Additional loss with fibre bend: <0,05 dB v/1550 nm 10 turns with radius 15 mm
<0,5 dB v/1550 nm 1 turn with radius 10 mm
Patch cords for use in all parts of the network, through the full
CWDM and DWDM ranges.
Can be delivered with most connector types.
PC or APC polish.
Using bend insensitive fibre (G.657.A1).
Delivered in customer specified lengths.
Patch cords - single mode
DATASHEET DB4100-E Issue C Page 2 of 5
Specifications cont.
1) There are two types of FC/APC connectors:
FC/APCR (Reduced) with a key width of 2,0 mm (1,97 - 2,02) - often named 2,04 mm and FC/APCN (NTT) with a key width of 2,14 mm (2,09 - 2,14) these two types must not be mixed.
2) The connector features a spring-loaded shutter which closes automatically when the connector is disengaged.
Connector type (single mode)
Standard Ferrule type Polishing technic Insertion loss
(1310/1550 nm)
Return loss Class
according to
IEC 61755-1
Max Typ Max Typ
SC/PC IEC 61 754-4 Zirconia, 2.5 mm PC (0˚ convex)
Colour code blue
0.5 dB 0.15 dB -45 dB -50 dB C2
SC/APC IEC 61 754-4 Zirconia, 2.5 mm APC (8˚ convex)
Colour code green
0.5 dB 0.15 dB -60 dB -65 dB C1
LC/PC IEC 61 754-20 Zirconia, 1.25 mm PC (0˚ convex)
Colour code blue
0.5 dB 0.15 dB -45 dB -50 dB C2
LC/APC IEC 61 754-20 Zirconia, 1.25 mm APC (8˚ convex)
Colour code green
0.5 dB 0.15 dB -60 dB -65 dB C1
FC/PC IEC 61 754-13 Zirconia, 2.5 mm PC (0˚ convex)
Single mode attenuated patch cord with connector in both ends. Diameter is 2.0 mm and standard length is 1 m.
Specifications Attenuation accuracy*: +/- 13 % For values of 1 - 6 dB nominal
+/- 10 % For values of 7 - 20 dB nominal
Operating wavelength: 1260 - 1620 nm
Operating temperature: -25 °C to 60 °C
* Insertion loss from the connectors will be added
Connectors:
Polishing technic: PC (0˚ convex) Colour code blue
APC (8˚ convex) Colour code green
Insertion loss: < 0.5 dB < 0.15 dB typical
Article numbers ATN-77-xx-010 Attenuated patch cord, SC/PC - SC/PC, xx dB, 1 m
ATN-EE-xx-010 Attenuated patch cord, SC/APC - SC/APC, xx dB, 1 m
ATN-LL-xx-010 Attenuated patch cord, LC/PC - LC/PC, xx dB, 1 m
ATN-KK-xx-010 Attenuated patch cord, LC/APC - LC/APC, xx dB, 1 m
ATN-55-xx-010 Attenuated patch cord, FC/PC - FC/PC, xx dB, 1 m
ATN-DD-xx-010 Attenuated patch cord, FC/APCR - FC/APCR, xx dB, 1 m
ATN-HH-xx-010 Attenuated patch cord, FC/APCN - FC/APCN, xx dB, 1 m
ATN-MM-xx-010 Attenuated patch cord, MU/PC - MU/PC, xx dB, 1 m
ATN-FF-xx-010 Attenuated patch cord, E2000/PC - E2000/PC, xx dB, 1 m
ATN-GG-xx-010 Attenuated patch cord, E2000/APC - E2000/APC, xx dB, 1 m
xx = attenuation: 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 15, 20 dB May on request be delivered as hybrids patch cords (different connectors in each end). Other lengths may also be delivered.
Single mode attenuated patch cord (1 m).
May be delivered with most connector types, PC- or APC polished.
May be delivered with attenuation from 1 to 20 dB.