RDW Vehide Technology Division ;II @) THE NETHERLANDS (NEDERLAND) COMMUNlCATION Conceming (1): - appro'/al grallted - approval extended appro'/al refused appro'/al Y/ithdra'.vn prodl:1ctioll defillitely discontinl:1ed of a type ofmechanical coupling device or component pursuant to Regulation number 55. Approval num ber: E4-55R-010036 Extension num ber: 01 Approval mark:E4 55R-Ol 0036 1. Trade name or mark of the device or component . STEELPRESS 2. Manufacturer' s name for the type of device or component : BC-1200 3. Manufacturer' s name and address : STEELPRESS Sp. z 0.0. u1.Powstancow Wielkopolskich 48 PL-62-031 Lubon - Poznan 4. If applicable, name and address ofthe manufacturer's representative 5. Altemative supplier' s name or trade marks applied to the device or component 6. Name and address of company or body taking responsibility for the conformity of production : STEELPRESS Sp. z 0.0. u1.Powstancow Wielkopolskich 48 PL-62-031 Lubon - Poznan 7. Submitted for approval on " P.o. Box 777 2700 AT Zoetermeer The Netherlands Vehicle Approval and Information TeL + 31 (0)793458143 Fax + 31 (0)79 345 8043 www.rdw.nl Coupling-component R55-01 v5.00 Page l oj3 )
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
9.1. Type and class of device or component : Coupling head, Class B50-X
9.2. Characteristic values
Vehicle manufacturer' s maximum
permissible vehicle mass : ... kg
Distribution of maximum permissiblevehicle mass between the axles
Vehicle manufacturer' s maximumpermissible towable trailer mass : ... kg
Vehicle manufacturer' s maximum
permissible static mass on couplingbaH : ... kg
Maximum mass of the vehicle, withbodywork, in running order, includingcoolant, oils, fuel, tools and sparewheel (if supplied) but not includingdriver : ... kg
Loading condition under which thetow baHheight of a mechanicalcoupling device fitted to category MIvehicles is to be measured - seeparagraph 2 of annex 7, appendix l: : not applicable
10. Instructions for the attachment of the coupling device or component type to the vehicle andphotographs or drawings of the mounting points given by the vehicle manufacturer:see instructions for attachment and use
..
Coupling-compOnEnt R55-01 v5.00 Page 2 oj3
9.2.1. Primary values:
I
D
I
U
I
De
I
V
I
S(kN) (tonnes) (kN) (kN) (kg)11,3 - - - 100
Alternative values:
I
D
I
U
I
De
I
V
I
S(kN) (tonnes) (kN) (kN) (kg)
- -
9.3. For classA mechanicalcouplingdevicesor components,includingtowingbrackets:
Information on the fitting of any special reinforcing brackets or plates or spacingcomponents necessary for the attachment of the coupling device or component:not applicable
Additiona1information where the use of the coupling device or component is restricted tospecialtypesofvehicles - seeannex5, paragraph3.4.:not applicable
For Class K hook type couplings, details of the drawbar eyes suitable for use with theparticular hook type:not applicable.
Date of test report : 31-5-2007
Number of test report : 200411340 Extension Ol
Approval mark position : on housing
Reason( s) for extension of approval : constructive modifications
The list of documents deposited with the Administration Service which has grantedapproval is annexed to this communication and may be obtained on request.
- Test report as mentioned in item 15- Instruction for attachment and use-Drawings