Page 1
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarIngeoIngeo Coloration Pack Coloration Pack
Contents of pack
1. What is Ingeo?
2. Optical brightening of Ingeo
• General• Selection of optical brighteners• Preparation and brightening
3. Controlled Coloration of Ingeo with Dianix dyes
4. Dianix product benefits in Ingeo dyeing
5. Dyeing of Ingeo yarns and fabrics
• Preparation• Dyeing• Clearing
6. Dyeing of Ingeo blends
• Ingeo/cotton• Ingeo/wool• Ingeo/silk
7. Fastness comparison
8. Dianix product data on Ingeo
Contents of CD Rom
1. Introduction to Ingeo (video)
2. Dianix colour matching database on Ingeo
Page 2
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarWhat is What is IngeoIngeo??
Ingeo is Cargill Dow’s brand name for the first man-made fibre derived from 100% annuallyrenewable resources. The process starts with an abundant, natural raw material (today corn) that can be easilyand efficiently converted into plant sugars, which are then fermented using technology,which is similar to making yoghurt. Other potential feedstocks for the future are rice andpotatoes (and even grass and straw). The fermentation products are subsequentlytransformed into a high-performance polymer called polylactide from which the brandedIngeo fibres and filament yarns are extruded. The production and use of Ingeo means less greenhouse gases are added to theatmosphere in comparison with traditional synthetic fibres. Compostability and chemical recyclability also mean that under the right conditions andwith the right handling the complete life cycle of production, consumption, disposal andreuse is completely closed.
Key product benefits of Ingeo Major end-use markets Excellent hand and drape Knitted apparelMoisture Management (Wicking) DenimInherent Flame Retardancy FurnishingsBiodegradability Carpets
Page 3
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarOptical Brightening of Optical Brightening of Ingeo Ingeo
General
� optical brighteners used for polyester are the preferred choice for brightening of Ingeo� using carefully-selected optical brighteners, Ingeo can be brightened at 110 0C� treatment time at temperature should be kept as short as possible to minimise loss of fibre strength by hydrolysis
Selection of optical brighteners
� not all optical brighteners which are suitable for polyester work on Ingeo because of limited exhaustion and build-up
0.1 % 0.3 %
0.5 % 1.0 %
0.1 % 0.3 %
0.5 % 1.0 %
un-treated
1
1 1
1
2
22
2
3
3 3
3
un-treated
un-treated
un-treated
1. brightened2. reduction cleared3. postset
1. brightened2. reduction cleared3. postset
Page 4
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarOptical Brightening of Optical Brightening of Ingeo Ingeo
Selection of optical brighteners
� two optical brighteners which are suitable for Ingeo are Blankophor® PEG (Bayer/Sybron)
� and Ultraphor® SFR (BASF)
0.1 % 0.3 %
0.5 % 1.0 %
0.1 % 0.3 %
0.5 % 1.0 %
un-treated
un-treated
1. brightened2. reduction cleared3. postset
1
2
3
1
2
3
1
2
3
1
2
3
Page 5
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarOptical Brightening of Optical Brightening of Ingeo Ingeo
Preparation and Brightening
50 °C
60 °C15 min
rinse at 50 °C
1 g/l Diadavin® UNJ (Bayer/Sybron) or Kieralon® MFB (BASF)2 g/l soda ash.
Preparation
40 °C
1-2 °C/min
15-30 min
1. 1 % Levegal® DLP (Bayer/Sybron) 2 g/l sodium acetate pH 4.5-5 acetic acid2. x % optical brightener
Optical Brightening
rinse at 50 °C60 °C
2 °C/min
1 2
110 °C
Page 6
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarControlled Coloration of Controlled Coloration of Ingeo Ingeo with with Dianix Dianix dyesdyes
Ingeo dyeing
� disperse dyes are the preferred dye class for exhaust dyeing of Ingeo� using carefully-selected Dianix disperse dyes, Ingeo can be dyed at 1100C in nearly all shades; for the heaviest shades on some Ingeo substrates the highest colour yield is produced at 1150C� dyeing time at top temperature should be kept as short as possible to minimise loss of fibre strength by hydrolysis
Controlled Coloration
� is DyStar’s technology for producing highest rates of Right First Time production in the dyehouse� combines reliable, production-friendly dyes with optimised application technology� increases dyehouse productivity and reduces unit costs of production� optimises the quality of dyed Ingeo by minimising the need for reprocessing
Page 7
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStar
How to select disperse dyes for Ingeo dyeing
What’s different about dye selection for Ingeo?
Simple transfer of your preferred disperse dye selection for polyester will not bring success in dyeing Ingeo; disperse dyesshould be chosen for
high level of dyebath exhaustion at 1100C-1150C
� to optimise batch-to-batch shade reproducibility� to reduce dyes costs� to minimise colour in effluent
compatible dye combinations
� to optimise Right First Time dyeing performance, and reduce cost of production
good colour fastness
� to washing, perspiration, light and rubbing
Controlled Coloration of Controlled Coloration of Ingeo Ingeo with with Dianix Dianix dyesdyes
Ingeo Coloration Pack
In this brochure we present� a selection of Dianix dyes to meet these criteria� process technology for pre-treatment, dyeing and after-treatment of Ingeo yarns and fabrics� a Colour Match Prediction database for easy shade-matching with recommended Dianix dyes
For latest updates please see the DyStar and Cargill Dow web-sites at www.dystar.de and www.cargilldow.com/ingeo.
Page 8
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product benefitsproduct benefits
High levels of dyebath exhaustion
� to optimise batch-to-batch shade reproducibility� to reduce dyes costs� to minimise colour in effluent
Low-energy disperse dyes generally give lowlevels of dyebath exhaustion
% exhaustion after 30 mins at 1100C
Disperse Yellow 54 40Disperse Red 60 71Disperse Blue 56 70
High-energy disperse dyes give very variablelevels of dyebath exhaustion
Dianix Crimson SF 40Dianix Luminous Red G 52Dianix Rubine S-2G 150% 95
Medium-energy disperse dyes give the most consistently-high levels of exhaustion, but even these vary widely; a trichromat with high and compatible rates ofexhaustion is
Dianix Yellow Brown CC 97Dianix Rubine CC 95Dianix Blue K-FBL 95
For standard levels of colour fastness this trichromat isrecommended for ternary shades
Dianix dyes recommended in this brochure have beencarefully selected to give reliable Controlled Coloration ofIngeo, and to meet a range of colour fastness needs. Build-upand fastness do vary slightly with Ingeo substrate, and shouldbe checked on the actual Ingeo yarn/fabric to be dyed.
Page 9
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStar
On-tone colour build-up
� shade stays on-tone during the dyeing process� improved chance of passing shade inspection first time
Dianix Dianix product benefitsproduct benefits
PLA
Recipe: 1.30 % Dianix Yellow Brown CC 0.26 % Dianix Rubine CC 0.33 % Dianix Blue K-FBL
Temperature
60 °C
70 °C
80 °C
90 °C
100 °C
110 °C
110 °C 15 min
110 °C 30 min
DyeingDyeing
reductive clearedRemainder
reductive cleared
Page 10
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStar
On-tone migration
� equal shade across and along the fabric, or through the yarn package� improved chance of passing shade inspection first time even in difficult ternary shades
Dianix Dianix product benefitsproduct benefits
Recipe: 1.30 % Dianix Yellow Brown CC 0.26 % Dianix Rubine CC 0.33 % Dianix Blue K-FBL
Beforemigration
Aftermigration
Migrateddyes
Condition: 30 min at 110 °C
Page 11
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product benefitsproduct benefits
Shade stability to time/temperature variations
� safety margin against unexpected variations in dyebath conditions� improved chance of passing shade inspection first time even in difficult ternary shades
15 min 30 min 45 min 60 min
100 °C
110 °C
115 °C
Recipe: 1.30 % Dianix Yellow Brown CC 0.26 % Dianix Rubine CC 0.33 % Dianix Blue K-FBL
DE 2.4 DE 1.8 DE 2.0 DE 2.0
DE 0.27 Control DE 0.28 DE 0.18
DE 0.18 DE 0.13 DE 0.12 DE 0.25
Page 12
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product benefitsproduct benefits
Influence of temperature/chemical variation in after-treatment
� the open structure of Ingeo has to be taken into account for after-treatment� shade stability with good fastness results is achievable by selecting right temperature and chemicals
DE =1.9
0.7Y
DE =1.6
0.5YDE =0.7
DE =0.7
0.1Y
DE =0.6
0.2YContro
l
DE =0.6
0.2YDE =0.4
DE =0.6
0.2Y
DE =0.7
0.2Y
DE =0.4
0.1Y
DE =0.7
0.3Y
Recipe: 0.72 % Dianix Yellow Brown XF 1.54 % Dianix Deep Red SF 1.30 % Dianix Rubine XFN 0.128 % Dianix Blue XF
untreated
2 g/l Cyclanon® PE-Jet (BASF)10 min at 70 °C
2 g/l Cyclanon® ECO (BASF)pH 415 min at 70 °C
3 ml/l NaOH 32.5 %2 g/l Hydrosulfite Conc. (BASF)15 min at 70 °C
1.5 g/l soda ash.2 g/l Hydrosulfite Conc. (BASF)15 min at 60 °C
Page 13
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product benefitsproduct benefits
Good all-round colour fastness
� Dianix dye packages offer standard fastness, high fastness to washing or high fastness to light� fastness levels can vary depending on the source of the Ingeo substrate, and should be checked before use� full fastness details are given in the pattern pages later in this brochure
1. Standard colour fastness package
Dianix Yellow AC-E newDianix Red AC-E 01Dianix Blue AC-E
Dianix Yellow Brown CCDianix Rubine CCDianix Blue K-FBL
TernariesTernaries Support dyesSupport dyes
Dianix Flavine XFDianix Red C-4G 150%Dianix Violet S-4RDianix Turquoise S-BG*Dianix Dark Blue SE-3RT
*For heavy turquoise and bright green shades, it may be necessary to use a mixture of Dianix Turquoise S-BG and Turquoise XF
Page 14
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStar
2. High wash-fastness package
3. High light-fastness package
Dianix Flavine XFDianix Yellow Brown XFDianix Deep Red SFDianix Blue XF
TernariesTernaries Support dyesSupport dyes
Dianix Rubine XFNDianix Turquoise XFDianix Navy XFDianix Black XF
Dianix Orange AM-SLRDianix Red AM-SLRDianix Blue AM-SLR
Dianix Yellow AM-42Dianix Dark Red AM-2BDianix Blue AM-77
TernariesTernaries Support dyesSupport dyes
Dianix Yellow AM-GDianix Turquoise S-BGDianix Navy AM-GDianix Black AM-B
Dianix Dianix product benefitsproduct benefits
Page 15
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDyeing of Dyeing of Ingeo Ingeo yarns and fabricsyarns and fabrics
1. Preparation
2. Package dyeing of Ingeo yarns
50 °C
60 °C15 min
rinse at 50 °C
1 g/l Diadavin® UNJ (Bayer/Sybron) or Kieralon® MFB (BASF)2 g/l soda ash.
40 °C
0.5-1 °C/min
15-30 min
1. 1 % Levegal® DLP (Bayer/Sybron) 2 g/l sodium acetate pH 4.5-5 acetic acid2. x % Dianix dyes
60 °C2 °C/min
1 2
110-115 °C
For recipes containing Dianix Blue XF, Navy XF and Black XF an addition of 2 g/l Ludigol® AR (BASF) is recommended
Page 16
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStar
3. Dyeing of Ingeo piece
4. Reduction clearing
Dyeing of Dyeing of Ingeo Ingeo yarns and fabricsyarns and fabrics
40 °C
1-2 °C/min
15-30 min
1. 1 % Levegal® DLP (Bayer/Sybron) 2 g/l Persoftal® L (Bayer/Sybron) 2 g/l sodium acetate pH 4.5-5 acetic acid2. x % Dianix dyes
60 °C2 °C/min
1 2
110-115 °C
15 min60 °C
50 °C
1.5 g/l soda ash.2.0 g/l Hydrosulfite Conc. (BASF)
rinse at 50 °C
rinse at 30 °C
For recipes containing Dianix Blue XF, Navy XF and Black XF an addition of 2 g/l Ludigol® AR (BASF) is recommended
Page 17
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDyeing of Dyeing of Ingeo Ingeo blendsblends
Dyeing of Ingeo/cotton blends
60 °C
95 °C30 min
rinse at 60 °C
3.0 g/l soda ash.3.0 ml/l hydrogen peroxide 35%0.5 g/l Baystabil® DB (Bayer/Sybron)1.0 ml/l Baysolex® QXL (Bayer/Sybron)
Bleaching
Especially for bright pale shades a bleaching of the cotton portion before dyeing is necessary. To prevent hydrolysis of Ingeo during this process only a soft bleach is recommended.
Page 18
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDyeing of Dyeing of Ingeo Ingeo blendsblends
Dyeing of Ingeo/cotton blends
� blends of Ingeo with cotton, viscose and other cellulose-based fibres can be dyed using Dianix disperse dyes on Ingeo, with either direct, reactive or vat dyes on cotton� in practice we recommend one-bath dyeing with Dianix disperse dyes and Sirius direct dyes for shortest process times, minimum fibre damage and a good all-round level of colour fastness
Staining of Sirius dyes on Ingeo
SiriusYellow K-CF
Yellow K-GRL
Orange K-CF
Orange 3 GDL
Scarlet K-CF
Rubine K-2BL
Blue K-CFN
Blue S-BRR
Grey K-CGL
Ingeorinsed%
0.5
0.5
0.25
0.25
0.5
0.4
0.83
0.35
0.45
CO
Page 19
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDyeing of Dyeing of Ingeo Ingeo blendsblends
Staining of Dianix dyes on cotton
DianixCO
rinsed% Ingeo
Yellow XF
Yellow Brown XF
Deep Red SF
Rubine XFN
Blue XF
Turquoise XF
Navy XF
Black XF 2.25
0.22
0.6
0.58
0.42
0.55
0.8
1.1
Dyeing of Ingeo/cotton blends
Page 20
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDyeing of Dyeing of Ingeo Ingeo blendsblends
Staining of Dianix dyes on cotton
DianixCO
rinsed% IngeoYellow AC-E new
Red AC-E 01
Blue AC-E
Yellow Brown CC
Red C-4G 150 %
Rubine CC
Blue K-FBL
Violet S-4R 0.23
0.17
0.27
0.13
0.35
0.75
0.28
0.25
Dyeing of Ingeo/cotton blends
Dark Blue SE-3RT 1.0
Turquoise S-BG 0.34
Page 21
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDyeing of Dyeing of Ingeo Ingeo blendsblends
Dyeing of Ingeo/cotton blends
40 °C
1-2 °C/min
15-30 min
1. 1 % Levegal® DLP (Bayer/Sybron) 2 g/l Persoftal® L (Bayer/Sybron) pH 4.5-5 sodium acetate / acetic acid2. X % Dianix dyes3. Y % Sirius dyes4. 10 g/l sodium sulphate
80 °C
2 °C/min
1 2
110-115 °C
For recipes containing Dianix Blue XF, Navy XF and Black XF an addition of 2 g/l Ludigol® AR (BASF) is recommended
3 4
1 °C/min20 min
100 °C
1. Sirius B2. caustic soda dosed for 10 min
Dyeing
After-treatment
rinse at 50 °C
1
40 °C
2
10 min 10 min 10 min
rinse at 30 °C
rinse at 40 °C
Page 22
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDyeing of Dyeing of Ingeo Ingeo blendsblends
Dyeing of Ingeo/wool blends
� Ingeo/wool blends can be dyed with good colour fastness and minimum fibre damage in a one-bath process using Dianix disperse dyes and Supralan acid dyes
40 °C
1-2 °C/min
30 min
1. 1 % Avolan UL® DLP (Bayer/Sybron) 1 g/l Avolan IS® (Bayer/Sybron) pH 4.5-5 sodium acetate / acetic acid2. X % Dianix dyes3. Y % Supralan dyes
2 °C/min
1 2
110 °C
3
Dyeing
1.5 g/l Blankit® INpH 8.5-9
After-treatment
rinse at 50 °C
rinse at 30 °C
rinse at 50 °C
Page 23
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDyeing of Dyeing of Ingeo Ingeo blendsblends
Dyeing of Ingeo/silk blends
� Ingeo/silk blends can be dyed with good colour fastness and minimum fibre damage in a one-bath process using Dianix disperse dyes and Supralan acid dyes
40 °C
1-2 °C/min
30 min
1. 1 % Avolan UL® DLP (Bayer/Sybron) 1 g/l Avolan IS® (Bayer/Sybron) pH 4.5-5 sodium acetate / acetic acid2. X % Dianix dyes3. Y % Supralan dyes
2 °C/min
1 2
110 °C
3
Dyeing
1.5 g/l Blankit® INpH 8.5-9
After-treatment
rinse at 50 °C
rinse at 30 °C
rinse at 50 °C
Page 24
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarFastness comparisonFastness comparison
Fastness on Ingeo versus polyester
0.242 % Dianix Rubine XFN0.044 % Dianix Navy XF3.32 % Dianix Black XF
0.72 % Dianix Yellow Brown XF1.54 % Dianix Deep Red SF1.3 % Dianix Rubine XFN0.128 % Dianix Blue XF
ISO 105-E04, acid
ISO 105-E04, alkaline
ISO 105-C06-A2, 40 °C
ISO 105-C06-B2, 50 °C
ISO 105-C06-C2, 60 °C
M&S C4A, 60 °C
AATCC IA, 40 °C
AATCC IIA, 49 °C
ISO 105-E04, acid
ISO 105-E04, alkaline
ISO 105-C06-A2, 40 °C
ISO 105-C06-B2, 50 °C
ISO 105-C06-C2, 60 °C
M&S C4A, 60 °C
AATCC IA, 40 °C
AATCC IIA, 49 °C
Ingeo dyed 30 min at 110 °C, cleared 15 min at 60 °C, heat-setted 30 s at 130 °C
PET dyed 30 min at 130 °C, cleared 20 min at 80 °C, heat-setted 30 s at 180 °C
Page 25
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 4 - 5 4 -5 4 - 55 5 5 5 5 5 55 5 5 5 5 5 55 4 - 5 4 - 5 4- 5 4 - 5 5 4 - 55 4- 5 5 4- 5 4 - 5 5 4- 5
4- 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 6
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 4 - 5 3 - 4 4 - 5 4 - 55 4 - 5 5 5 5 5 55 4 5 5 5 5 55 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 - 5 4 4 - 5 4 - 5 4 - 5
4 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 4 DMetallempfindlichkeit Fe 3-4 R
3.0-5.5
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität brighter / klarer
Dianix Flavine XF
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.14%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.43%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
0
50
100
150
200
Rel
ativ
e St
reng
th (%
)
0.036% 0.14% 0.43% 0.86%
Build-up / Aufbau
Page 26
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.10% 0.40% 1.20% 2.40%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5 - 6Carbon Arc 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 5 5 5 5 55 4 - 5 5 4- 5 4 - 5 5 55 4 - 5 5 4- 5 4 - 5 5 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5 - 6Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 5
3 - 45
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 2 D,RMetallempfindlichkeit Fe 4-5 D
3.0-5.5
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 1.2 %
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Yellow Brown XF
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.4%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
yellower, brighter/ gelber, klarerTungsten TL 84
pH stability / pH-Stabilität brighter / klarer
Page 27
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5 - 6Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 5 5 4 - 5 5 5 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 5 5 5 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 5 4 - 5 5 5 5
3 - 4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 6Carbon Arc 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5
3 - 4 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5Metallempfindlichkeit Fe 5
3.0-5.5
Artificial light / Kunstlicht
yellower / gelberTungsten TL 84
pH stability / pH-Stabilität yellower / gelber
Dianix Deep Red SF
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.38%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 1.15 %
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
0
50
100
150
200
Rel
ativ
e St
reng
th (%
)
0.10% 0.38% 1.15% 2.30%
Page 28
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.092% 0.367% 1.10% 2.20%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 4 - 5Carbon Arc 1
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 4 - 5 3 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 4 - 5 4 - 5 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
3 - 45
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 4 - 5Carbon Arc 1
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 4 3 3 - 4 3 - 4 45 3 - 4 5 4 - 5 4 - 5 5 4 - 5
4 - 5 3 - 4 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 3 4 - 5 3 - 4 4 - 5 4 - 5 4 - 5 4 - 5 3 - 4 4 3 - 4 4 4 - 5 4
3 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 4-5Metallempfindlichkeit Fe 4-5
4.0-5.0
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 1.1 %
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Blue XF
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.37%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
redder, duller / röter, stumpferTungsten TL 84
pH stability / pH-Stabilität duller / stumpfer
Page 29
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3 - 4Carbon Arc 1
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3 - 4Carbon Arc 2
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 4 - 5 4 4 - 5 4 - 5 4 - 55 3 - 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 4 - 5 4 4 - 5 4 - 5 4 - 55 3 - 4 4 - 5 4 4 - 5 4 - 5 4
3 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5Metallempfindlichkeit Fe 5
4.0-5.0
Artificial light / Kunstlicht
yellower / gelberTungsten TL 84
pH stability / pH-Stabilität yellower / gelber
Dianix Rubine XFN
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.28%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.83 %
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.069% 0.277% 0.83% 1.66%
Page 30
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3 - 4Carbon Arc 2
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 5 5 55 5 5 5 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3 - 4Carbon Arc 2 - 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 5 5 5 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 5
3 - 4 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 2 GMetallempfindlichkeit Fe 5
3.0-4.5
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 1.6 %
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Turquoise XF
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.53%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
duller / stumpferTungsten TL 84
pH stability / pH-Stabilität greener, brighter / grüner, klarer
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.133% 0.533% 1.60% 3.20%
Page 31
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3 - 4Carbon Arc 1
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO
4 - 5 R 4 4 - 5 3 - 4 4 4 - 5 4 - 5 4 - 5 R 3 - 4 4 - 5 4 4 - 5 5 5 4 - 5 R 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5 4 - 5 R 3 - 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 5 4 - 5 R 3 - 4 4 3 - 4 4 4 - 5 4
4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 1
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 4 - 5 3 - 4 4 4 - 5 4 - 55 3 4 - 5 3 - 4 4 - 5 5 5
4 - 5 3 - 4 4 - 5 3 - 4 4 - 5 5 4 - 5 4 - 5 2 - 3 4 2 - 3 4 - 5 4 - 5 4 4 - 5 3 4 3 4 4 - 5 3 - 4
3 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 4 RMetallempfindlichkeit Fe 4-5
4.0-5.0
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität greener, duller / grüner, stumpfer
Dianix Navy XF
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.7%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 4.2%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.175% 0.70% 2.10% 4.20%
Page 32
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3Carbon Arc 2
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO
4 - 5 Y 3 4 3 - 4 3 - 4 4 - 5 4 4 - 5 3 5 4 - 5 4 - 5 5 4 - 5 4 - 5 3 - 4 4 - 5 4 4 - 5 5 4 - 5 4 - 5 3 4 - 5 3 4 - 5 4 - 5 4 - 5
4 - 5 Y 3 - 4 4 - 5 3 - 4 4 4 - 5 4 - 5 3 - 4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3Carbon Arc 2
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO
4 - 5 Y 2 - 3 4 2 - 3 3 3 - 4 3 - 4 4 - 5 Y 2 - 3 4 - 5 4 4 - 5 5 4 - 5 4 - 5 Y 3 4 - 5 3 - 4 4 - 5 5 4 - 5 4 - 5 Y 2 - 3 4 3 4 - 5 4 - 5 4 4 - 5 Y 2 - 3 3 - 4 2 - 3 3 - 4 4 3 - 4
3 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 3-4 RMetallempfindlichkeit Fe 4-5
4.0-5.0
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 4.5%
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Black XF
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 2.25%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
yellower / gelberTungsten TL 84
pH stability / pH-Stabilität greener / grüner
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.188% 0.75% 2.25% 4.50%
Page 33
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.028% 0.112% 0.335% 0.67%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
XenonCarbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 5 5 5 5 5 55 4 - 5 5 4 - 5 5 5 55 4 - 5 4 - 5 4 - 5 4 - 5 5 55 5 5 5 5 5 55 5 5 4 - 5 5 5 5
4 - 5 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 5 4 - 5 5 5 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 55 4 - 5 5 4 - 5 5 5 55 4 - 5 5 4 - 5 5 5 5
4 - 55
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 1-2Metallempfindlichkeit Fe 5
3.0-8.0
Artificial light / Kunstlicht
clearer / klarerTungsten TL 84
pH stability / pH-Stabilität clearer / klarer
Dianix Orange AM-SLR
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.11%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.34%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 34
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.015% 0.062% 0.185% 0.37%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
XenonCarbon Arc 6
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 5 4 - 5 5 5 55 4 - 5 5 4 - 5 5 5 55 4 - 5 4 - 5 4 - 5 4 - 5 5 55 5 5 4 - 5 5 5 55 5 5 4 - 5 5 5 5
4 - 5 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 5 5 5
4 - 55
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5 BMetallempfindlichkeit Fe 5
3.0-10.0
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität redder / röter
Dianix Red AM-SLR
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.06%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.19%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 35
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.042% 0.167% 0.50% 1.00%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
XenonCarbon Arc 7
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 5 5 4 - 5 5 5 55 5 5 5 5 5 55 5 5 5 5 5 55 5 5 5 5 5 55 5 5 5 5 5 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7 - 8Carbon Arc 7
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 5 5 4 - 5 4 - 5 5 4 - 5
4 - 55
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 3Metallempfindlichkeit Fe 5
3.0-7.0
Artificial light / Kunstlicht
duller / trüberTungsten TL 84
pH stability / pH-Stabilität greener / grüner
Dianix Blue AM-SLR
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.17%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.5%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 36
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.167% 0.667% 2.00% 4.00%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 4 - 5 4 4 - 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 4 - 5 4 4 - 5 4 - 5 4
4 - 55
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5 RMetallempfindlichkeit Fe 5
4.0-7.0
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 2.0%
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Yellow AM-G
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.67%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität redder / röter
Page 37
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.20% 0.80% 2.40% 4.80%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 6 - 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 5 5 55 4 - 5 5 5 5 5 55 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 6 - 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 55 4 5 4 - 5 5 5 55 4 - 5 5 5 5 5 4 - 55 3 - 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 55 4 4 - 5 4 4 - 5 4 - 5 4
4 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5 RMetallempfindlichkeit Fe 5
3.0-8.0
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität redder / röter
Dianix Yellow AM-42
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.80%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 2.4%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 38
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.167%0.667% 2.00% 4.00%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 6Carbon Arc 6
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 4 3 - 4 4 4 - 5 4 - 55 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 3 - 4 3 3 - 4 4 3 - 45 3 4 - 5 3 4 4 - 5 4 - 55 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 55 3 - 4 4 3 - 4 4 4 - 5 45 3 - 4 4 3 - 4 4 4 - 5 4
3 - 4 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5Metallempfindlichkeit Fe 5
4.0-8.0
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 2.0%
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Dark Red AM-2B
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.67%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
duller, yellower / trüber, gelberTungsten TL 84
pH stability / pH-Stabilität clearer, yellower / klarer, gelber
Page 39
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.088% 0.35% 1.05% 2.10%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 5 4 4 - 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 3 - 4 4 - 5 3 - 4 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5
4 - 5 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 1-2Metallempfindlichkeit Fe 4
3.0-7.0
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität greener / grüner
Dianix Blue AM-77
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.77%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 2.1 %
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 40
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.06% 0.22% 0.67% 1.34%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 6
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 5 5 4 - 5 5 5 5
4 - 5 Y 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5 4 - 5 Y 4 - 5 5 4 - 5 4 - 5 5 4 - 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 8Carbon Arc 6
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 5 5 5 5 5 4 - 5
4 - 5 Y 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5 4 - 5 Y 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5
4 - 55
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5Metallempfindlichkeit Fe 5
3.0-9.0
Artificial light / Kunstlicht
redder / redderTungsten TL 84
pH stability / pH-Stabilität greener / grüner
Dianix Turquoise S-BG
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.22%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.67%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 41
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.167% 0.667% 2.00% 4.00%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 3 4 - 5 2 - 3 3 - 4 4 - 5 4 - 5
4 - 5 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 55 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 4 - 5 4 4 - 5 4 - 5 4 - 5
3 - 4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 3 - 4 3 3 - 4 4 45 2 3 1 - 2 2 - 3 3 - 4 35 2 - 3 4 - 5 2 - 3 4 4 - 5 3 - 45 3 - 4 4 3 3 - 4 4 - 5 3 - 45 3 - 4 4 3 - 4 4 4 - 5 3 - 4
2 - 34
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 3-4Metallempfindlichkeit Fe 4
4.0-6.0
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 4.0%
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Navy AM-G
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.67%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität greener, duller / grüner, trüber
Page 42
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.23% 0.93% 2.80% 5.60
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO
4 - 5 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 5 4 - 5 2 - 3 3 - 4 2 - 3 3 4 - 5 4 4 - 5 3 - 4 4 - 5 3 4 - 5 4 - 5 4 - 5 4 - 5 4 4 - 5 4 4 - 5 4 - 5 4 - 5
5 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 53
4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 4 - 5Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO
4 - 5 4 4 3 - 4 4 4 - 5 4 - 5 4 - 5 2 3 - 4 1 - 2 2 - 3 4 - 5 3 - 4 4 - 5 3 4 2 - 3 4 - 5 4 - 5 4 - 5 4 - 5 3 - 4 4 3 - 4 4 - 5 4 - 5 4 4 - 5 3 - 4 4 - 5 3 - 4 4 - 5 4 - 5 4
2 - 3 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5 RMetallempfindlichkeit Fe 5
4.0-6.0
Artificial light / KunstlichtTungsten TL 84
pH stability / pH-Stabilität greener / grüner
Dianix Black AM-B
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 2.8%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 5.6%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 43
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.029% 0.117% 0.35% 0.70%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
XenonCarbon Arc 6
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 5 5 4 - 5 5 5 55 4 - 5 4 - 5 4 - 5 4 - 5 5 55 4 - 5 5 4 - 5 4 - 5 5 55 5 5 5 5 5 55 5 5 4 - 5 5 5 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 7Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 4 - 5 5 55 4 - 5 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 5
4 - 55
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5Metallempfindlichkeit Fe 5
3.0-10.0
Artificial light / Kunstlicht
redder, duller / röter, trüberTungsten TL 84
pH stability / pH-Stabilität redder / röter
Dianix Yellow AC-E new
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.12%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.35%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 44
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.046% 0.183% 0.55% 1.10%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
XenonCarbon Arc 6
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 5 4 - 5 5 5 55 4 - 5 4 - 5 4 4 - 5 5 55 4 - 5 4 - 5 4 - 5 4 - 5 5 55 5 5 4 - 5 5 5 55 5 4 - 5 4 - 5 5 5 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 6Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 3 - 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 5
4 - 5 C 4 - 5 4 - 5 4 4 - 5 5 4 - 5 4 - 5 B 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 3Metallempfindlichkeit Fe 5
3.0-10.0
Artificial light / Kunstlicht
bluer / blauerTungsten TL 84
pH stability / pH-Stabilität redder / röter
Dianix Red AC-E 01
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.18%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.55%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 45
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e St
reng
th (%
)
0.021% 0.083% 0.25% 0.50%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
XenonCarbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 5 5 5 5 5 55 4 - 5 4 - 5 4 4 - 5 5 4 - 55 5 4 - 5 4 - 5 4 - 5 5 55 5 5 5 5 5 55 5 5 5 5 5 4 - 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 6Carbon Arc 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 3 - 4 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 5
4 - 55
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 2Metallempfindlichkeit Fe 5
3.0-9.00
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.25 %
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Blue AC-E
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.08%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
duller / trüberTungsten TL 84
pH stability / pH-Stabilität redder / röter
Page 46
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.058% 0.233% 0.70% 1.40%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 2
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 5 4 - 5 4 - 5 5 4 - 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 55 3 - 4 4 - 5 3 - 4 4 - 5 5 4 - 55 3 - 4 4 - 5 4 - 5 4 - 5 5 4 - 55 4 4 - 5 4 4 - 5 5 4 - 55 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 5
4 - 5 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 4-5 RMetallempfindlichkeit Fe 4
3.0-8.0
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität redder / röter
Dianix Yellow Brown CC
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.23%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.7%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 47
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.125% 0.50% 1.50% 3.00%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3Carbon Arc 2 - 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 4 3 - 4 4 - 5 4 - 5 4 - 55 3 - 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 5 5 4 - 55 3 - 4 4 3 - 4 4 - 5 4 - 5 45 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 3 - 4Carbon Arc 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 2 - 3 3 2 - 3 3 3 - 4 3 - 45 3 4 - 5 3 - 4 4 - 5 4 - 5 4 - 55 3 - 4 4 - 5 4 - 5 4 - 5 5 4 - 55 3 3 - 4 3 3 - 4 3 - 4 3 - 45 3 - 4 3 - 4 3 3 - 4 4 3 - 4
3 - 4 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 4-5 YMetallempfindlichkeit Fe 4-5 Y
4.0-5.5
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 1.5%
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Red C-4G 150%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.5%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / KunstlichtTungsten TL 84
pH stability / pH-Stabilität yellower / gelber
Page 48
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.047% 0.187% 0.56% 1.12%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 6Carbon Arc 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 5
4 - 5 3 4 - 5 2 - 3 4 - 5 4 - 5 4 - 5 4 - 5 3 - 4 4 - 5 4 4 - 5 5 4 - 5 4 - 5 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 5 4 - 5 3 - 4 4 3 - 4 4 4 - 5 4 - 5
4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 3 - 4 2 - 3 3 3 - 4 3
4 - 5 2 - 3 4 - 5 2 - 3 3 - 4 4 - 5 44 3 4 - 5 3 - 4 4 - 5 4 - 5 4 - 5
4 - 5 3 4 2 - 3 3 4 3 4 - 5 3 3 - 4 3 3 - 4 4 3 - 4
3 - 4 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 4 YMetallempfindlichkeit Fe 4-5 Y
3.0-9.0
Artificial light / Kunstlicht
bluer, duller / blauer, trüberTungsten TL 84
pH stability / pH-Stabilität redder / röter
Dianix Rubine CC
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.19%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.56 %
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 49
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.042% 0.167% 0.50% 1.00%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5 - 6Carbon Arc 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO
4 - 5 4 - 5 4 - 5 4 4 - 5 4 - 5 4 - 5 4 - 5 3 - 4 4 - 5 3 4 - 5 5 4 - 5
5 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
4 - 55
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5 - 6Carbon Arc 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO
4 - 5 4 4 - 5 3 - 4 4 4 - 5 4 - 5 4 - 5 4 4 - 5 2 - 3 3 - 4 4 - 5 4
5 3 - 4 4 - 5 3 - 4 4 - 5 5 4 - 55 4 4 - 5 4 4 - 5 4 - 5 45 4 4 - 5 4 4 - 5 4 - 5 4 - 5
4 - 5 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5Metallempfindlichkeit Fe 5
3.0-8.0
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.5%
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Blue K-FBL
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.17%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität redder / röter
Page 50
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.038% 0.15% 0.45% 0.90%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 4
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 4 - 5 4 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 4 - 5 4 4 - 5 4 - 5 4 - 5
4 - 5 3 4 - 5 3 4 - 5 4 - 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 5 4 - 55 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5
3 - 4 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 5Metallempfindlichkeit Fe 5
3.0-6.0
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Water, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Rubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.45%
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Washing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2S
Dianix Violet S-4R
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.15%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität redder, clearer / röter, klarer
Page 51
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarDianix Dianix product data on product data on IngeoIngeo
Build-up / Aufbau
0
50
100
150
200
Rel
ativ
e S
treng
th (%
)
0.083% 0.333% 1.00% 2.00%
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 4 4 3 - 4 4 4 - 5 45 2 - 3 4 - 5 2 - 3 3 - 4 4 - 5 4
4 - 5 3 - 4 4 - 5 3 - 4 4 - 5 4 - 5 4 - 5 4 - 5 4 4 - 5 4 4 - 5 4 - 5 4 - 5
5 4 - 5 4 - 5 4 - 5 4 - 5 4 - 5 4 3 - 4 4 - 5
Reduction cleared / reduktiv gereinigt: 15 min at 60 °C
Xenon 5Carbon Arc 3
Reduction cleared / reduktiv gereinigt: 15 min at 60 °CE CA CO PA PES PAN WO5 3 - 4 3 - 4 3 - 4 3 - 4 4 3 - 45 2 - 3 3 - 4 2 - 3 3 - 4 4 - 5 3 - 45 3 - 4 4 - 5 3 - 4 4 - 5 4 - 5 45 3 - 4 4 3 - 4 4 - 5 4 - 5 45 3 - 4 4 3 - 4 4 4 - 5 4
3 4 - 5
Dye Characteristics / Produktmerkmale
Sensitivity to metal ions Cu 4 RMetallempfindlichkeit Fe 5
3.5-6.5
Artificial light / Kunstlicht
redder / röterTungsten TL 84
pH stability / pH-Stabilität redder / röter
Dianix Dark Blue SE-3RT
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Dyed / gefärbt: 30 min at 110 °C
Heat-set/ nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 0.67%
Fastness Properties on Ingeo Staple Fibre / Echtheiten auf Ingeo-Staplefaser
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalischPerspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trockenRubbing, wet Reibechtheit, nass
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°C
Depth of shade / Farbtiefe: 2.0%
Light FastnessLichtechtheit
Dyed / gefärbt: 30 min at 110 °C
Heat-set / nachfixiert: 30 secs at 130°CWater, severe Wasser schwerWashing C06/B02 Wäsche C06/B2SWashing AATCC IA Wäsche AATCC IAPerspiration, alkaline Schweiß, alkalisch
Rubbing, wet Reibechtheit, nass
Perspiration, acid Schweiß, sauerRubbing, dry Reibechtheit, trocken
Page 52
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStar
Page 53
•••••••••••••••••••••••••••••••••••••••••••••••••• DyStarHigh wash-fastnessDianix DianixFlavine XF*0.14% / 0.43%
Blue XF0.37% / 1.10%
Yellow Brown XF0.40% / 1.20%
Turquoise XF0.53% / 1.60%
Deep Red SF0.38% / 1.15%
Navy XF0.70% / 4.20%
Rubine XFN0.28% / 0.83%
Black XF2.25% / 4.50%
High light-fastnessDianix DianixOrange AM-SLR0.11% / 0.34%
Dark Red AM-2B0.67% / 2.00%
Red AM-SLR0.06% / 0.19%
Blue AM-770.77% / 2.10%
Blue AM-SLR0.17% / 0.50%
Turquoise S-BG*0.22% / 0.67%
Yellow AM-G0.67% / 2.00%
Navy AM-G0.67% / 4.00%
Yellow AM-420.80% / 2.40%
Black AM-B2.80% / 5.60%
Standard fastnessDianix DianixYellow AC-E new0.12% / 0.35%
Rubine CC0.19% / 0.56%
Red AC-E 010.18% / 0.55%
Blue K-FBL0.17% / 0.50%
Blue AC-E0.08% / 0.25%
Violet S-4R0.15% / 0.45%
Yellow Brown CC0.23% / 0.70%
Dark Blue SE-3RT0.67% / 2.00%
Red C-4G 150%0.50% / 1.50%
* also used for standard fastness