Dynamic Directional System for the Visually Impaired ENSC 340 Project Copyright 2003 © Sound Directions.

Dynamic Directional System for the Visually Impaired

ENSC 340 Project

Copyright 2003 © Sound Directions

Team Organization

• Farhan Ali, Team leader, CEO

• Daniel Kim, VP R&D

• Nima Jahedi, CTO

• Galerah Paradian, VP Marketing

• Ted Liu, CFO

• Chris Chun, COO

Overview

• Market

• Solutions

• Phase one details

• Phase two details

• Questions

The Need

• 105,000 Canadians registered with CNIB

• Number is increasing by one thousand people per month

• Navigation aids very limited

Existing Solutions

• Guide Dogs

• Talking Signs™

– IR Beacons placed in environment

– User Must Scan using hand-held device

– Line of sight required

– No directions given

Dynamic Directional System

• Provide directions to the visually impaired based on their orientation

• Easy to use for the visually impaired

• Effective in indoor and outdoor environments

• Cheap

Research

• Visually Impaired Program at VCC

– Focus group of visually impaired navigation students

• CNIB

– Existing trends and technologies

Project Overview

• Phase One

– ENSC 340 deliverable

– Basic functionality

• Phase Two

– End of 2004

Phase One Overview

USER MODULE:“Snow hill is North, Civic

centre is East”

Location code

Sign Module

Phase One Overview (Contd..)

Database

Wireless Communications Technology

• Wireless Communications Design criteria:

– Simple to integrate

– Short-range (within a 5 ~ 7 meter radii)

– Does not require line-of-sight

– Cheap

Competing Technologies

• Infrared Pros

• Cheap, simple to integrate

– Cons• Needs line-of-sight

• Narrow range communication

• Ultrasound– Cons

• Complicated detection scheme

• Only useful in range finding

• Discouraged by instructors

Competing Technologies (Contd..)

• Bluetooth

Pros• For short-range

application

– Cons• Takes time to develop

• Expensive, development kit costs > $1,000 apiece

• RF Pros

• Higher S/N

• Not line-of-sight

• Simple to use

– Cons

• Co-channel Interference

Technology of our choice

• Linx Technologies ES-series Evaluation Kit

– Cheapest module

– Allows surface mount

• Low interference and better S/N ratio

• Power consumption

• Signal strength indicator

• Usage of unlicensed ISM-band

RF Communication

• Receiver module

– Integrated with the user module

– Used to receive location codes

– Receives at USART rate

• Transmitter module

– Integrated with sign module

– Transmit location codes for location identification

– Transmits at USART rate

RF transmitter

PIC Microcontroller

RF receiver

PIC Microcontroller

Modules Specification

Transmission Frequency

916.48MHz

Interface USART serial with header encapsulation

Data Rate Up to 200 ~ 56,000bps

Range Approx. 500ft indoor

Range Determination

• To determine if the user is near a sign

• When the user is near a sign– Notifies the user

– Receives location codes

• When the user is not near a sign– Warns the user

Range Control System

• When RSSI is low• The Processor is sleeping

– Saves Power– No UART

• When RSSI is high• Interrupt

• The Processor wakes up

Antenna

ReceiverModule

SignalProcessing

PICRSSI916MHz FSK

Signal Possessing

Contains: Amplifier

• Shifts the signal level

Integrator

• Removes Spikes

Schmitt Trigger

• Stabilizing the switching against rapid triggering

Advantages

• Processor goes to sleep

– Saves Power

– Extends Battery Life

– Reduces interference from other RF sources

– Ensures data is only received near a sign

UART

• Universal Asynchronous Receiver and Transmitter

• Data communication between microcontrollers and RF receiver/transmitter

• Frame Format: (11bits)– 8-bits Data– Even Parity

ParityBit

8-Bit DataSTART Stop

PIC16F876A UART

- Two level FIFO register

- Used for Preamble and Location Code

- Error Flags (OERR, FERR)

- Baud rate generator

Transmission

• We are using 33.6K Baud

• Transmit Preamble and Data periodically

• Produce and send “Parity bit”

WAIT

SEND DATA

SEND PREAMBLE

Transmitter

Reception

• After Microcontroller wakes up:

– Check for errors

– Check for Data validity

Check Parity

OERR Check

FERRCheck

Wait for a sign

Receive Data + parity

Error

Error

Error

Good data

Good data

Receiver

Good data

Reception (Contd..)

Preamble?

Old Data?

Valid Data?

Received Data

Error

Error

Enable location code rx

Good data

• After receiving one byte of data:

– Check if it is the preamble

– Check if it is old data

– Check if it is valid data

Error Checking

1) Parity (Error in transmission)

- Done internally by the microcontroller firmware

- Calculate Parity in Transmitter side- Check for parity bit on the Receiver side

Single bit checking had been used to Parity detection

Errors

Parity OERR FERR

Error Checking (Contd..)

2) Internal PIC microcontroller error flags for UART

-OERR (Overrun error)

Third byte arrives before reading the last two

-FERR (Framing error)

Stop bit detected as clear

PIC will reject data with any of the errors.

Data processing

Determine orientation

Calculate resultant direction

Wait for valid location code

SPEAK

Fetch store namesfrom database

Same code?Yes

Determining orientationNorth

South

West East

00 32

64

96

128

160

192

224

0 1 1 0 0 01 1

Determine resultant direction

Resultant direction =

Store Direction – User direction

Ex) London Drugs – South (126)

User orientation – East (64)

126 - 64 = 64 EAST

Compass

• Provides digital 0-255 compass bearing

• Uses Philips magnetic field sensor

• Can detect Earth’s magnetic field

Limitations

• Magnetic interference

– may influence compass reading

– compass should be kept afar

– choose sign locations with care

• Tilting

– tilting off horizontal results in increasing error

– Tilt compensated compass (upto 50˚ without error)

Text-to-speech

• Input: ASCII characters

• Converts ASCII characters to speech

• Reduces storage, complexity and cost

I2C

• Bi-directional two-wire serial bus

• provides a communication link between integrated circuits (ICs)

Compass bearings

ASCII

Phase Two Overview

• Data Storage

• User Interface

• Potential

Data Storage

Database

Internet

Database

Proposed System

Internet

Sign Module

Sign Module

Server with directional database

Location Codes

Directions

Internet storage

• Can store large amounts of data

• Easier to update the database

• Infrastructure already in place

• Cheap to implement, can be used with other applications

Internet Integration

• PDA with WLAN card Easy to program

Minimal Hardware design required

– Visually impaired people have no other use for PDA

• Cell Phone Used by many people

– Slower Data rates

– Coverage Issues

Internet Integration (Contd..)

• Custom made WLAN moduleCould be made cheaper

Customized for use by visually impaired people

– Extensive Hardware development required

User Interface

• Hot Keys for critical locations

• Earphone

• Pushbuttons with Braille subtitles

Complete Solution

• To accurately direct visually impaired people to any place they wish to go

Budget

Phase One Phase Two

Estimated Actual Estimated

$850 $550 $2000

Summary

• Phase One completed

• Research on phase two underway already

– Orientation Detection Methods

– Communication methods

– User Interface