◊ Key Features ◊ At a Glance SAM-MT 1000 DVB-S ● DVB-S2 Solutions for Analysis and Monitoring Monitoring SAM-MT 1000 is a cost efficient turnkey solution based on common server- and interface hardware. It enables network operators to monitor DVB-S and/or DVB-S2 broadcasts in the Head-end, at Transmitter sites and within the Field. Several multiplexes (8+ MPTS) can be monitored simultaneously in real-time on a single device, providing a very small footprint and both low CAPEX and OPEX. The solution offers a wide range of use cases for each multiplex: SNMP based monitoring of hundreds of parameters in real-time visual confidence monitoring of all TV services simultaneously in-depth remote problem analysis on all technical layers Input RF - ASI - IP o also in mixed configurations decontis. RF Layer o Rx Level, C/N, SNR, BERaV, MER, PER, EbN0 … o Modulation + Stream Parameters o Constellation Diagram MPEG Layer o Prio 1, 2, 3 acc. TR 101 290 o PID + Program Bitrates o Program Announcement EPG DVB Subtitle DVB Teletext DSM-CC / MHP/ HbbTV Audio/Video Loudness measurement transcoding and streaming any Audio/Video content to remote locations TS snapshot creation and TS streaming for in-depth problem analysis individual configuration of error/warning thresholds and SNMP Traps completely remote configurable via SNMP or Remote Desktop comprehensive logging of all events
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
◊ Key Features
◊ At a Glance
SAM-MT 1000
DVB-S ● DVB-S2
Solutions for Analysis and Monitoring
Monitoring
SAM-MT 1000 is a cost efficient turnkey solution based on common
server- and interface hardware. It enables network operators to
monitor DVB-S and/or DVB-S2 broadcasts in the Head-end, at
Transmitter sites and within the Field.
Several multiplexes (8+ MPTS) can be monitored simultaneously in
real-time on a single device, providing a very small footprint and both
low CAPEX and OPEX.
The solution offers a wide range of use cases for each multiplex:
SNMP based monitoring of hundreds of parameters in real-time
visual confidence monitoring of all TV services simultaneously
in-depth remote problem analysis on all technical layers
Input RF - ASI - IP o also in mixed configurations
decontis.
RF Layer
o Rx Level, C/N, SNR, BERaV, MER, PER, EbN0 … o Modulation + Stream Parameters o Constellation Diagram
MPEG Layer o Prio 1, 2, 3 acc. TR 101 290 o PID + Program Bitrates o Program Announcement
EPG
DVB Subtitle
DVB Teletext
DSM-CC / MHP/ HbbTV
Audio/Video
Loudness measurement
transcoding and streaming any Audio/Video content to remote locations
TS snapshot creation and TS streaming for in-depth problem analysis
individual configuration of error/warning thresholds and SNMP Traps
completely remote configurable via SNMP or Remote Desktop
via RF, ASI or IP. Hundreds of parameters are analyzed
simultaneously in real-time on all technical layers. The
monitoring results and alarms are sent via SNMP to the
operation centers. Additionally the Audio/Video content
can be transcoded and streamed to remote locations.
(3) Administration + Maintenance Network administration and maintenance staff can
access the monitoring probes via SNMP or via Remote
Desktop using the comfortable GUI. Beside all
configuration tasks also remote problem analysis can be
performed right in the probe’s powerful analysis GUI or
by capturing and streaming of TS snapshots to the local
desk. With decontis Analysis Solutions the TS can be
analyzed in any regard up to the last bit.
(2) Operation Center The Network Management System (NMS) running in the
operation center receives all monitoring results and
alarms via SNMP and visualize these for the operators
service staff. Any NMS can be used, however, the
decontis NMS provides a lot of unique features and thus
is qualified perfectly as central operator component.
(5) Status View A monitoring viewer application collects and aggregates
the monitoring status of all decontis monitoring probes
operated by one or several operation centers. It
visualizes the current status of all monitoring probes
within comfortable status views and map displays in a
read-only manner.
(4) Visual Monitoring Particular programs, the complete A/V mosaic wall or
even the entire monitoring desktop can be streamed via
HTTP Live Streaming (HLS) to remote locations. That way
visual confidence monitoring can be performed via any
device having a web browser, regardless on the used
OS – i.e. Tablet, PC, Smartphone, Laptop … using
Windows, Android, iOS, Linux …
Note: 1.The number of multiplexes which can be monitored simultaneously on a single machine depends on the chosen CPU, the actual content of the multiplexes, their
bandwidth and the active monitoring tasks. Especially decoding of 4k or HD videos using HEVC or H.264 codecs and related monitoring features seize significant CPU resources. In cases of heavy video decoding load the use of dedicated video servers running decontis’ mosaic wall is recommended.
2.All decontis monitoring solutions are based on common server and interface hardware, i.e. no special hardware is necessary. So also already existing hardware or hardware from your preferred local server hardware supplier can be used, if appropriate.