label.sapssa.averydennison.com Durable goods require labels that give crucial instructions, product details and safety information. The labels have to stay in place and remain legible for the entire lifespan of an item - which can be a demanding labelling challenge. Choosing a pre-tested and compliant labelling material means added reassurance for converters and a simpler and faster route to adoption for end users. This document summarises the commonly used standards and specifications for durable goods labelling, and shows a wide range of compliance-tested Avery Dennison materials. Please contact your sales representative if you need any additional information or further testing support. The biggest subsegments in which common regulations and specifications apply are electronics & appliances and automotive. Durable Goods Labelling Compliance productoverview
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
label.sapssa.averydennison.com
Designed and Engineered Solutions
Designed and Engineered Solutions
Designed and Engineered Solutions
Durable goods require labels that give crucial instructions, product details and safety information. The labels have to stay in place and remain legible for the entire lifespan of an item - which can be a demanding labelling challenge.
Choosing a pre-tested and compliant labelling material means added reassurance for converters and a simpler and faster route to adoption for end users. This document summarises the commonly used standards and specifications for durable goods labelling, and shows a wide range of compliance-tested Avery Dennison materials. Please contact your sales representative if you need any additional information or further testing support.
The biggest subsegments in which common regulations and specifications apply are electronics & appliances and automotive.
Durable Goods Labelling Compliance
productoverview
label.sapssa.averydennison.com
Designed and Engineered Solutions
Designed and Engineered Solutions
Designed and Engineered Solutions
Electronics & Appliances
CHEMICAL RUB TEST OF PRINTED LABELSA marking durability rub test is often needed for labels on electronic and electrical goods. A visual examination assesses the label’s legibility and adhesion after rubbing the labels with a cloth that has been soaked in any of a variety of liquid(s) including petroleum spirit (hexane), water, methylated spirit (ethyl alcohol denatured with methanol) and isopropyl alcohol. The liquid and rubbing duration will vary by standard (for example VDE 0711, ICE 60335-1, IEC 60950-1 and DIN 75302).
Avery Dennison has tested printed samples according to the widely used specification ICE 60335-1 (7.14). This involves rubbing a label for 15 seconds with a cloth soaked in water, drying, and then rubbing for 15 seconds with a cloth soaked in n-hexane.
Electrical medical equipment labels are tested for chemical resistance according to IEC 60601-1. This involves rubbing printed samples for 15 seconds with a cloth soaked with water, followed by 15 seconds with methylated spirit and finally 15 seconds with IPA.
UL AND C-ULUL (formerly Underwriters Laboratories Inc.) is a US-based safety consulting company established in 1894. Goods and components to be sold in the US must be UL-recognised for safety. The company not only tests and certifies products in its laboratories, but also defines standards and writes specifications.
UL understands that safety-related labels are critical to the overall product safety. It sets out relevant requirements in the standard UL 969 (“Standard for Marking and Labeling Systems”). This focuses especially on the permanence of adhesion and legibility after different exposure conditions. Converters supplying labels for use with a UL-recognised product in the US must meet all relevant UL requirements.
In Canada, labels must comply with CSA standard 22.2 no. 0.15 (“Adhesive Labels”). UL also tests and recognises labels according to this standard, which are then C-UL recognised.
UL FOR CABLE LABELSWhereas UL 969 is applicable only to labels on smooth and flat surfaces cables and wire labelling is evaluated against different UL standards, and Avery Dennison offers materials that comply with the following standards:
> UL 817 – cord sets and power supply cords > UL 2238 – cable assemblies and fittings for industrial control and signal distribution
Automotive
FMVSS 302 - FLAMMABILITY-TESTING STANDARDFederal Motor Vehicle Safety Standards (FMVSS) are US federal regulations. Standard FMVSS 302 relates to the burning behaviour of materials used inside road vehicles such as passenger cars, trucks, buses and agriculture machinery. It was developed to help reduce deaths and injuries to occupants caused by vehicle fires, especially from discarded cigarettes and matches. Most automotive OEMs specify flammability testing based on FMVSS 302 and technically equivalent OEM standards.
The test sample is held horizontally in a U-shaped holder and exposed to a flame for 15 seconds in a combustion chamber, in order to see if/when the flame extinguishes, or the time taken for the flame to pass a defined distance. The burning rate per minute is then calculated. For most automotive applications, a burning rate of no more than 100 mm/min is acceptable, although some vehicle manufacturers have tightened the requirements.Some label materials burn at a rate < 100 mm/min when tested on their own. Standard polyester label materials were found to be compliant when applied to a panel made of slow burning plastic as used in the automotive industry.
productoverview
Overlamination Films CodeFasson® 1M CL PET TC/S8020/PET30 MZ0111
Fasson® 1M CL PET TC/S8020/BG40Wh Imp MZ0111N
Fasson® 1 Mil Clear UV PET/S3000/1M PET #79325 for use on polyester, polypropylene and vinyl base materials polyester, polypropylene and vinyl base materials
Fasson® 1 Mil Clear Print-Treated Polyester/S8020/1M PET #77955 for use on polyester, polypropylene and vinyl base materials polyester and vinyl base materials
Fasson® 1 Mil Matte Clear Polyester/S8020/40#BG #77843 for use on polyester, polypropylene and vinyl base materials polyester and vinyl base materials
Fasson® 1M Matte PET/S8020/G80 MZ0112 for use on polyester and vinyl base materials
Fasson® 3 Mil Velvet Lexan/S730/1.5 Mil Polyester #75849 for use on polyester and vinyl base materials polyester and vinyl base materials
Fasson® 5 Mil Velvet Lexan/S730/1.5 Mil Polyester #75850 for use on polyester and vinyl base materials polyester and vinyl base materials
Transparent Polyester MaterialsFasson® 1M Clear PET TC/S8020/B90 MZ0202^Fasson® 2 Mil Clear Polyester TC/S333/50#SCK ABC #72823^Fasson® 2 Mil Clear PET TC/S730/50#SCK ABC #61320 refer data sheet
White Polyester MaterialsFasson® 25mic White PET TC4/S333/BG50#WH ni MZ0332
Fasson® 2M WH PET TC/S333/BG50Wh MZ0102^Fasson® 2 Mil White Polyester TC/S730/50#SCK ABC #40443 refer data sheet
Fasson® 2 Mil White Polyester TC/S8015/50#SCK ABC #76656 refer data sheet
Fasson® 2M WH PET TC/S8049/50# SCK ABC #79453 refer data sheet
Fasson® 50mic Matte White PET TC/S333/BG50#WH MZ0098
Fasson® 50mic Matte White PET TC/DS017HT/BG50#WH MZ0362 refer data sheet
Silver Polyester MaterialsFasson® 50mic Bright Silver PET TC/S333/BG50# WH MZ0054
Fasson® 1M MAT CH PET TC/S333/BG40Bl MZ0152
Fasson® 1M MAT CH PET TC/S333/BG50Wh MZ0200
Fasson® 2M MAT CH PET TC/S333/BG50Wh MZ0104^Fasson® 2 Mil Matte Chrome Polyester TC/S333/50#SCK ABC #72826^Fasson® 2 Mil Matte Chrome Polyester TC/S730/50# SCK #41044 refer data sheet
Fasson® 2 Mil Matte Chrome Polyester TC/S8015/50#SCK ABC #76660 refer data sheet
Fasson® TRANSFER PET Matt White/S8049/BG42Wh BSS AL854 refer data sheet
Fasson® TRANSF PET75 MATT WHITE/S8049/BG42WH BSS AL851 refer data sheet
Fasson® TRANSF PET75 MATT SILVER/S8049/BG42WH BSS AL850 refer data sheet
OVERVIEW OF COMPLIANT DURABLE LABEL MATERIALS
UL ind
oor
UL outd
oor
c-UL i
ndoo
r
c-UL o
utdoo
r
Armor
AXR
600
Armor
AXR
7 +
Armor
AXR
8
DNP R30
0
DNP R51
0
DNP TR40
70
DNP TR60
70
DNP TR60
75
Limak
SP-3
30
Limak
SP-4
10
ITW B
324
Ricoh B
110C
Ricoh B
110C
R
Ricoh B
110C
X
Ricoh B
120 E
C
Others
1
Alumini
um
Stainle
ss S
teel
Acrylic
pain
t
Alkyd
paint
Polyes
ter p
aint
ABSPoly
carb
onate
(PC)
Polypr
opyle
ne (P
P)
Polysty
rene (
PS)
Others
1
Ribbons included in UL/ c-UL Recognition Surfaces included in UL Recognition
Surfaces included in
c-UL Recognition
1 see UL site or data sheet ^Product tested through CSA directly
The table below shows only positive test results. An empty cell does not always imply that a material is not compliant, but may simply mean that it has not been tested. Further information is available on request.
South Asia Pacific and Sub-Saharan Africa460 Alexandra Road #28-02/03Singapore 119963+65 6430 7000
North Asia5th Floor, Hongye Park 1801 Hongmei Road, Xuhui District 200233, Shanghai, China +86 21 33951888
Latin AmericaRodovia Vinhedo-Viracopos, KM 77CEP 13280-000Vinhedo - SP, Brazil+55 19 3876-7600
North America8080 Norton PkwyMentor, OH 44060800.944.8511
Designed and Engineered Solutions
Designed and Engineered Solutions
Designed and Engineered Solutions
WARRANTY:The information in this document is based on test results, and represents our best understanding of compliance requirements. While this summary can help with the selection of durable goods labelling materials, the final responsibility for testing under real-world conditions rests with the converter or end user.
Need more information? Speak to your local Avery Dennison representative today - email us at [email protected]
2017-10_17969
DISCLAIMER - All Avery Dennison statements, technical information and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All Avery Dennison products are sold with the understanding that purchaser has independently determined the suitability of such products for its purposes. All Avery Dennison’s products are sold subject to Avery Dennison’s general terms and conditions of sale, see http://terms.europe.averydennison.com