INSTALLATION INSTRUCTIONS [email protected] | 914.339.2929 Rear Turn Signals Ducati Hypermotard 950 Remove (2) bolts with a 4mm allen key to take off panel underneath. (Picture 1) Unplug main connector. (Picture 2) Remove (3) bolts with a 6mm allen key and slide off stock tail section. (Picture 3) Remove (4) torx bolts to expose connectors inside stock tail section and un- plug the 3 of them. (Picture 4) 1 2 3 4
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
INSTALLATION INSTRUCTIONS
[email protected] | 914.339.2929
Rear Turn Signals¬
Ducati Hypermotard 950
Remove (2) bolts with a 4mm allen key to take off panel underneath. (Picture 1)
Unplug main connector. (Picture 2)
Remove (3) bolts with a 6mm allen key and slide off stock tail section. (Picture 3)
Remove (4) torx bolts to expose connectors inside stock tail section and un-plug the 3 of them. (Picture 4)
1
2
3
4
INSTALLATION INSTRUCTIONS
[email protected] | 914.339.2929
Rear Turn Signals¬
Take new turn signal bracket and mount to existing holes with stock 6mm hardware. (Picture 5)
Mount panel you removed in step 1 back on bike using stock 4mm hardware. (Picture 6)
5
6
Related Documents
