Equivalent Circuit DIGITAL TRANSISTOR (NPN) FEATURES Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors(see equivalent circuit) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input.They also have the advantage of almost completely eliminating parasitic effects Only the on/off conditions need to be set for operation, making device PIN CONNENCTIONS and MARKING DTC113ZM SOT-723 1. IN 2. GND 3. OUT DTC113ZE SOT-523 1. IN 2. GND 3. OUT DTC113ZUA SOT-323 1. IN 2. GND 3. OUT DTC113ZKA SOT-23-3L 1. IN 2. GND 3. OUT DTC113ZCA SOT-23 1. IN 2. GND 3. OUT DTC113ZSA TO-92S 1. GND 2. OUT 3. IN design easy DTC113ZM/ZE/ZUA ZKA /ZCA/ZSA 2019-01/02 REV:O
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Equivalent Circuit
DIGITAL TRANSISTOR (NPN)
FEATURES
� Built-in bias resistors enable the configuration of an inverter circuit
without connecting external input resistors(see equivalent circuit)
� The bias resistors consist of thin-film resistors with complete isolation
to allow negative biasing of the input.They also have the advantage of
almost completely eliminating parasitic effects
� Only the on/off conditions need to be set for operation, making device
PIN CONNENCTIONS and MARKING
DTC113ZM SOT-723
1. IN
2. GND
3. OUT
DTC113ZE SOT-523
1. IN
2. GND
3. OUT
DTC113ZUA SOT-323
1. IN
2. GND
3. OUT
DTC113ZKA SOT-23-3L
1. IN
2. GND
3. OUT
DTC113ZCA SOT-23
1. IN
2. GND
3. OUT
DTC113ZSA TO-92S
1. GND
2. OUT
3. IN
�
�
�
��
�
�
�
�
�
�
�
��
�
� ��
design easy
DTC113ZM/ZE/ZUA ZKA /ZCA/ZSA
2019-01/02REV:O
MAXIMUM RATINGS(Ta=25�� unless otherwise noted) Limits(DTC113Z�)
Symbol Parameter M E UA CA KA SA
Unit
VCC Supply Voltage 50 V
VIN Input Voltage -5 +10 V
IO Output Current 100 mA
PD Power Dissipation 100 150 200 200 200 300 mW
Tj Junction Temperature 150 � Tstg Storage Temperature -55 +150 �
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures.