DSM13 MULTIFUNCTION STEAM MOP …...L. Garment Steamer loth M. Steam & Detergent head N. arpet Gilder Product parts 1. Handle Lock Release 2. Handle 3. Power ord Hook 4. Steam head

DSM13 MULTIFUNCTION STEAM MOPINSTRUCTION MANUAL

w w w . v y t r o n i x . c o m

Page 1 of 12

BLANK PAGE

Page 2 of 12

Safety instructions

WARNING：Read all safety warnings and all instructions. Failure to follow the warnings and

instructions listed below may result in electric shock, fire and/or serious injury.

• Warning: When using electrical appliances, basics safety precautions, including the

following, should always be followed to reduce the risk of fire, electric shock,

personal injury and material damage.

• Read all of this manual carefully before using the appliance.

• The intended use is described in this manual. The use of any accessory or

attachment or the performance of any operation with this appliance other than

those recommended in this instruction manual may present a risk of personal injury.

• Retain this manual for future reference.

Safety of others

• If this appliance is to be used by persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge, they must be given supervision or

instruction concerning use of the appliance in a safe way and understand the

hazards involved prior to using the appliance to ensure their safety and the safety of

others around them.

• Children must not be allowed to play with this appliance

• The appliance must not be left unattended while it is connected to the mains power

supply.

• The appliance is not to be used if it has been dropped, if there are visible signs of

damage or if it is leaking

• Keep the appliance out of reach of children until it has completely cooled down after

use even once unplugged as steam may still be pressurized inside.

Page 3 of 12

Using your appliance

• Do not direct steam at people, animals, electrical appliances or electrical outlets.

• Do not expose to rain.

• Do not immerse the appliance in the water.

• Do not leave the appliance unattended.

• Do not leave the appliance connected to an electrical outlet when not in use.

• Never pull the power cord to disconnect the appliance from the socket.

• Keep the appliance cord away from heat, oil and sharp edges.

• Do not handle steam cleaner with wet hands.

• Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord

around sharp corners or expose cord to heated surfaces.

• Do not use appliance in an enclosed space filled with vapor given off by oil-base

paint thinner, some moth-proofing substances, flammable dust, or other explosive or

toxic vapors.

• Do not use on leather, wax polished furniture or floors, synthetic fabrics, velvet or

other delicate, steam-sensitive materials.

• Do not use on any unsealed hard floor surfaces. Additionally, on surfaces that have

been treated with wax or some no-wax floors, the sheen may be removed by the

heat and steam action. It is always recommended to test an isolated area of the

surface to be cleaned before proceeding. We also recommend that you check the

use and care instructions from the floor manufacturer.

• Never put detergent or chemical products into the steam mop unless they have

been approved by Vytronix Ltd, as this may damage it or make it unsafe for use.

• The appliance emits very hot steam to sanitize the area of use. This means that the

steam head and cleaning pads get very hot during use.

• Always wear suitable shoes when using your steam mop and when changing the

accessories on your steam mop. Do not wear slippers or open-toed footwear.

• The tank lid may become hot during use.

• Care should be taken when using this appliance. DO NOT touch any parts which may

become hot during use.

• Do not use without the micro-fiber cleaning pad correctly installed.

Page 4 of 12

Box contents

A. Handheld Unit

B. Main Body/Folding Handle

C. Window Squeegee

D. Small Scrub Brush

E. Medium Scrub Brush

F. Accessory Adaptor

G. Angle Nozzle

H. Grout Cleaning Tool

I. Scraping Tool

J. Measuring cup

K. Microfiber Pad

L. Garment Steamer Cloth

M. Steam & Detergent head

N. Carpet Gilder

Product parts

1. Handle Lock Release

2. Handle

3. Power Cord Hook

4. Steam head swivel

5. Lock Catch

6. Power Cord

7. Power Switch

8. Water Inlet

9. Indicator light

10. Steam Adjustment Control

11. Water Tank Cap

12. Water Tank Button

13. Water Tank

14. Detergent Tank

15. Detergent On/Off Control

Page 5 of 12

Technical specification

• Rated voltage: 220-240V

• Rated frequency: 50Hz

• Output power: 1300W (+5%,-10%)

• Water tank capacity: 300 ML

• Steam output time: 20 minutes

• With a ready indicator. when the appliance is connected to power supply, turn on

the power switch, the indicate light will change to blue, meaning the mop is ready to

emit the steam.

• The angle of the rotation axis in the cleaner is greater；

• Comprehensive accessories configuration

Assembly

WARNING: Before attempting any of the following operations, make sure that the appliance

is switched off and unplugged and that the appliance is cold and contains minimal or no

water.

Locking the handle into position / releasing the handle

• To lock the handle into the upright position, simply lift the handle until it clicks into

place. Check handle is secure before using the steam mop.

• To release the handle and fold away for storage, press the release button on the

front of the handle and then gently fold the handle downward.

Page 6 of 12

Attaching the base to the main body

Slide the bottom end of main body

onto the steam head until it clicks into

place.

The steam head can be removed from

the main body by pressing the release

button on the main body.

Attaching a cleaning pad

Simply press the pad onto the underside of the base and it will

stick in place.

To remove the pad simply peel away from the base.

Attaching Carpet Gilder

After attaching a cleaning pad, lay the carpet glider flat on the

floor with the more open side facing upward. The Steam mop

simply snaps into place by pressing it into the carpet glider.

To remove the carpet glider, carefully unhook the securing clips

and the carpet glider will release,

Page 7 of 12

Operation

1) Fill the water tank

Method one:

Open the water tank cap by tuning it counterclockwise, fill

tank with 300ML of water use measuring cup, then

replace cap and turn clockwise to close.

Method two：

Remove the water tank from main body, open the

water tank cap by tuning it counterclockwise, fill

the water tank directly from a tap, then replace cap and

turn clockwise to close.

Place the water tank back into main body until it clicks into

place.

2) If using detergent, open the cap of the detergent tank and add the detergent into

the tank.

3) Plug in the appliance.

4) When the steamer is switched on, the indicator lights will turn red either side of

water tank to indicate it is preheating. If the lights do not illuminate, please check

the "troubleshooting" section for more details.

5) It will take approximately 20 seconds for the steamer to preheat, once the steam

mop is ready to use, the water tank will glow blue and the mop will emit steam

automatically, for this reason it is important not to leave the steamer unattended

while it is pre-heating.

6) To activate the detergent function, you will need to press the on/off button situated

on the base, when on, detergent will automatically me mixed into the steam as it is

emitted.

7) A full tank of water should last approximately 20 minutes.

8) The steam flow rate can be adjusted by turning the steam dial on the main body to

increase or decrease steam intensity depending on the nature of the cleaning task.

Page 8 of 12

To use as a handheld steamer

1) Press the release button on the main body to remove

handheld unit.

2) Install the accessory adaptor to the

handheld unit, this can later be

removed by pressing the release

button.

3) Select the accessory you wish to

use, place it onto the accessory

adaptor and turn clockwise until it

locks into place.

Page 9 of 12

Accessory list

WHAT IT’S CALLED WHAT IT LOOKS LIKE WHAT IT’S FOR

Window Squeegee/Garment

Steaming Tool

Removing soap scum and grime

from shower glass, mirrors and

windows.

Taking creases out of hanging

garments, curtains tablecloths and

more.

Small and Medium Scrub

brushes

Oven, microwaves, stove tops,

showers, bathtubs, tap fixtures,

tile, grout, toys, refrigerators, and

more.

Angled Nozzle

Stove tops, around tap edges,

grout, microwaves, sinks and other

hard to reach areas.

Grout cleaning Tool

Cleaning tile grout.

Scraper Tool

Scraping off baked on food, grime,

and grease. Removing residue or

other difficult substances from

non-delicate surfaces, such as

stove tops and ovens.

Garment Steamer Cloth

To be used with “Garment

Steaming Tool”

Microfiber Pad

(design may vary)

For general cleaning of hard floors

and refreshing carpets.

Page 10 of 12

Cleaning, maintenance and storage

BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET AND COMPLETLEY

COOLED DOWN BEFORE PERFORMING MAINTENANCE

Drain the remaining water in the tank and rinse after use.

Cleaning attachments can be washed in warm water with a small amount of dish soap if they

become dirty.

How to clean the water tank

To remove water marks and/or calcium deposits that build up inside the water tank, add one

or two tablespoons of white vinegar to a full water tank, replace the tank cap and then shake

the contents.

DO NOT TURN THE STEAMER ON.

How to remove limescale

If your steam mop begins to produce steam more slowly than usual or stops producing steam

completely, it may have a buildup of limescale. Lime scale can develop over time on the

metal parts, especially in hard water areas and can greatly affect performance.

It is advised to remove lime scale on regular basis every approximately once a month,

depending on water hardness and frequency of use.

1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.

2. Secure and position the unit to ensure steam released is aimed away from the floor or

surrounding objects and surface. Plug the unit in, turn the unit ON by pressing the power

switch, and allow the unit to produce steam until the vinegar/water solution is used up.

3. Repeat the above procedure as many times as necessary until a normal steam flow rate is

achieved.

4. Rinse out the tank thoroughly.

5. Fill the water tank with fresh water, attach to the unit and release steam through the

system until the water tank is empty to completely flush out any residual cleaning solution.

WARNING

Don't leave the steamer unattended during the limescale removal process and/or while in

use.

Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure

that there is no debris left in the system.

Page 11 of 12

Cleaning blocked accessories

Due to the water hardness in some areas, you may notice that less steam comes out from

the handheld steamer accessories, this may be caused by calcium buildup inside the tip of

the accessory nozzle.

How to clean calcium buildup

We recommend using a spray lubricant. Spray a small burst or two of the lubricant inside the

tip of the Jet Nozzle. After spraying lubricant inside the component, fill the steamer with

water according to the filing directions and run a continuous jet of steam through the

affected accessory for several minutes to remove the deposit once the steam pathway is

clear, aim the steamer at a neutral surface or cleaning cloth to make sure no debris is

emitted.

This product contains no serviceable internal parts. Do not try to repair it yourself. Any

maintenance or repair that requires disassembly or any steps other than those stated in this

manual must be carried out or approved by Vytronix Ltd.

Cleaning the microfiber pad

Machine washable on at 30 – 40 degrees. Always use water only or a mild detergent.

For best results, lay flat to dry. Do not tumble dry

IMPORTANT：Never use bleach or fabric softener when washing the microfiber cleaning

pad.

Storage after use

After the steamer is used, switch off the power and then unplug the power cord.

Take out the water tank and empty the residual water and wipe the external surface with a

dry cloth.

Remove the cleaning pad and wash it so that it will be ready for next use.；

Store product in a protected, dry area.

Keep out of reach of children.

Page 12 of 12

Troubleshooting

It is always advised to check the troubleshooting guide in the event of any issues before

making contact with Vytronix Ltd as many issues can be resolved quickly and easily at home.

BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET AND COMPLETELY

COOLED DOWN BEFORE PERFORMING TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION

Reduced steam or no steam Water tank may be empty Fill water into the water tank

Steam nozzle may be blocked Clean steam nozzle

There is no power to the unit Make sure unit is plugged in

Steam control Knob is in

MIN.

T Turn steam control knob

C clockwise.

Unit will not turn on

Power cord not plugged in Plug cord into a working

socket.

Internal fuse is blown Replace fuse with

appropriate type.

Warranty Registration

To register you free one year Vytronix warranty visit www.vytronix.com using product code:

brandnew-vytronix-dsm13

Safe Disposal

This marking indicates that this product should not be disposed with other

household waste throughout the EU. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To arrange

safe disposal of your used device, please use the return and collection systems

or contact the retailer where the product was purchased.

Register your warranty at www.vytronix.com