Stainless Steel DSI ® Cast Stainless Steel Gate, Globe and Check Valves Stainless Steel DSI ® Cast Stainless Steel Gate, Globe and Check Valves
Stainless SteelDSI®
Cast Stainless SteelGate, Globe and Check Valves
Stainless SteelDSI®
Cast Stainless SteelGate, Globe and Check Valves
DSI® Forged Stainless Steeland High Alloy Gate, Globe,and Check Valves
Design Standard: API 602 (NACE MR0175 2002 Edition)Pressure Classes: 150, 300, 600, 800, 1500, 2500,(1690, 2680)Size Range: 1/4" thru 2"End Connections: Flgd, Thrd, SWE, BW End, Ext. BodyAvailable Materials: F316, F316L, F304, F304L, F321,F347, F347H, Duplex and HASTELLOY®
PBV ® Process Threadedand Socket-Weld Ball Valves Three-Piece Bolted Body
Design Standard: ASME B16.34 (Fire Safe API 607,NACE MR0175 2002 Edition)Pressure Rating: 400 thru 6000 psi(ANSI 150 thru 2500)Size Range: 1/4" thru 2"End Connections: Thrd and SWEAvailable Materials: F316
PBV ®-USA ProcessFlanged Ball Valves
Design Standard: API 608 (FireSafe API 607) (NACE MR01752002 Edition)Pressure Classes: 150, 300,600 and 1500
Size Range: 1/2" thru 12"End Connection: Flgd
Available Materials: CF8M, CF8, CN7M, CF3, CF3M, HASTELLOY® Band HASTELLOY® C.
PBV ® Process Threaded Ball Valves Two-Piece Threaded and Seal-Welded Body
Design Standard: ASME B16.34 (Fire Safe API 607,NACE MR0175 2002 Edition)Pressure Rating: 2000 WOG and 2220 WOGSize Range: 1/4" thru 2"End Connections: Thrd (Female, Male and Combo)Available Materials: CF8M
PBV ®-USA ProcessFlanged Ball Valves
Design Standard: API 608 (FireSafe API 607) (NACE MR01752002 Edition)Pressure Classes: 150, 300,600 and 1500
Size Range: 1/2" thru 12"End Connection: Flgd
Available Materials: CF8M, CF8, CN7M, CF3, CF3M, HASTELLOY® Band HASTELLOY® C.
PBV ® Process Threaded Ball Valves Two-Piece Threaded and Seal-Welded Body
Design Standard: ASME B16.34 (Fire Safe API 607,NACE MR0175 2002 Edition)Pressure Rating: 2000 WOG and 2220 WOGSize Range: 1/4" thru 2"End Connections: Thrd (Female, Male and Combo)Available Materials: CF8M
DSI® Forged Stainless Steeland High Alloy Gate, Globe,and Check Valves
Design Standard: API 602 (NACE MR0175 2002 Edition)Pressure Classes: 150, 300, 600, 800, 1500, 2500,(1690, 2680)Size Range: 1/4" thru 2"End Connections: Flgd, Thrd, SWE, BW End, Ext. BodyAvailable Materials: F316, F316L, F304, F304L, F321,F347, F347H, Duplex and HASTELLOY®.
PBV ® Process Threadedand Socket-Weld Ball Valves Three-Piece Bolted Body
Design Standard: ASME B16.34 (Fire Safe API 607,NACE MR0175 2002 Edition)Pressure Rating: 400 thru 6000 psi(ANSI 150 thru 2500)Size Range: 1/4" thru 2"End Connections: Thrd and SWEAvailable Materials: F316
Contents
Stainless Steel Standard Features 3
Testing, Modifications and Accessories 4
Standard Product Range 4With DSI® Zy-Gear Bevel Gear Chart
Conformance And 5General Design Specifications
Metal/Alloy Designations Cryogenic Valves 6
Cryogenic Valves, Features, Materials and Tables 6
Specifying DSI® Stainless Steel Figure Numbers 7
Gate Valves 8-11
Globe Valves 12-15
Swing Check Valves 16-19
Pressure Temperature Ratings 20
Zy-Tech General Terms and Conditions of Sale 21-23
Z Y - T E C H G L O B A L I N D U S T R I E S
For years, Zy-Tech’s DSI ® Stainless Steel valves have beensatisfying the needs of Petroleum Refineries, ChemicalProcessing Plants, Power Generating Plants, Pulp andPaper Plants and other processing facilities throughoutthe world for both conventional and cryogenic services.
Zy-Tech offers you a variety of Stainless Steel and HighAlloy valve product solutions.
For years, Zy-Tech’s DSI ® Stainless Steel valves have beensatisfying the needs of Petroleum Refineries, ChemicalProcessing Plants, Power Generating Plants, Pulp andPaper Plants and other processing facilities throughoutthe world for both conventional and cryogenic services.
Zy-Tech offers you a variety of Stainless Steel and HighAlloy valve product solutions.
Sign on, specify and purchase Zy-Tech’sDSI ® Stainless Steel valve products easily
through Zy-Tech’s Z-Commerce at...
Contents
Stainless Steel Standard Features 3
Testing, Modifications and Accessories 4
Standard Product Range 4With DSI® Zy-Gear Bevel Gear Chart
Conformance And 5General Design Specifications
Metal/Alloy Designations Cryogenic Valves 6
Cryogenic Valves, Features, Materials and Tables 6
Specifying DSI® Stainless Steel Figure Numbers 7
Gate Valves 8-11
Globe Valves 12-15
Swing Check Valves 16-19
Pressure Temperature Ratings 20
Zy-Tech General Terms and Conditions of Sale 21-23
Standard Features of DSI® Stainless Steel Valves
Packing System
DSI® Stainless Steel Gate and Globe valves use a combination ofdie-formed flexible graphite and inter-braided graphite in apredetermined arrangement to ensure an effective seal.Graphite packing achieves its maximum ability to isolate theatmosphere when it is contained within a chamber that is precise
Low Fugitive Emission Service
DSI® Stainless Steel Gate, Globe and Check Valves are designedand manufactured to ensure leakage of less than 100 ppm (partsper million) of volatile organic compounds.
Base line laboratory testing (static and cycle testing) has beenperformed establishing critical design parameters necessary toachieve low emission sealing in the DSI® stem packing seal area
Critical Design and Manufacturing Controls Applied To ProduceLow Emission Service Valves In DSI® Standard Products.
• Stem Straightness and Roundness• Stem Surface Finish To Maximum 32 Ra• Stuffing Box Surface Finish To Maximum 125 Ra• Stuffing Box and Gland Cylindricity• Self Centering Gland Design• Gland Packing: Die-formed Graphite Rings with Braided
Graphite Top and Bottom Wiper Rings, or Braided PTFE.• Bonnet Gaskets:
• Class 150 Gate, Globe & Check Valves:316 SS Tanged Clad Graphite or PTFE
• Class 300 & 600 Valves: 316 SS Spiral Wound or PTFE
Low Emission Design Options
Live Load Packing For valves in service that require frequent cycling or highpressure/temperature variations (Graphite only), live load-ing can extend the service life between maintenance periodsby requiring less frequent packing gland adjustments.Belleville springs are employed to provide constant packinggland stress.
Graphite Packing Braided PTFE
in finish and dimension. DSI® Gate and Globe valves are manufac-tured with stem finishes better than 32 Ra and stuffing box wallfinishes for 125 Ra. In addition, stem straightness and taper areclosely controlled. Braided PTFE packing is also available as aDSI® standard valve packing - please specify at time of order.
Durable Bonnet Gasket Design
DSI® Stainless Steel valves are furnished with an encapsulated(tongue and groove) body-to-bonnet joint design on class 150,300 and 600 gate, globe and check valves. Additionally, the rela-tively narrow ASME standard face to face dimension of class 150flanged end gate valves presents a challenge in typical bonnetgasket designs normally resulting in the utilization of oval stylebonnet gaskets.
Oval style gaskets, while typically used industry wide, are lessdurable due to differentiating radii.DSI® Stainless Steel valves have been designed to over come thisproblem by providing a body design that facilitates a fully sym-metrical, round body-to-bonnet gasket contact surface area. Thisround bonnet gasket design, in pressure classes 150, 300 and 600,is an inherently stronger gasket than a typical oval gasket.
for Gate and Globe Valves and in the bonnet gasket sealing area(cover gasket for Check Valves).
In-house testing procedures have been developed and are peri-odically performed to ensure that standard product design andmanufacturing criteria consistently result in the DSI® Gate, Globeand Check Valve meeting a maximum of 100 ppm VOC leakageprior to shipment.
3
Industry inter-changeable pre-drilledmounting pattern per MSS SP101.
Testing, Modifications and Accessories for DSI® Stainless/Cryogenic ServiceZy-Tech Global Industries offers In-House NDE Testing, avariety of Product Modifications and Accessories, saving ourcustomers time and resources by eliminating the need formultiple purchase orders, time and transportation costs.
A single warranty then applies to each modified product,with each product inspected for quality and conformance toour customer's specifications and industry standards.
Available Modifications for DSI® Stainless Steel Valves• Packing and Gasket Changes• End Connection Modifications• Gear Operator Mounting• Trim Changes• Actuation• Cryogenic Gas Columns• Hand Wheel Extensions• PTFE Disc Inserts• Drilled & Tapped Connections • By-Pass Installations• Pressure Equalizing• Acid Shields• Oxygen & Chlorine Cleaning & Packaging
• Weld End Bore Changes• Customer Specified Coatings• Chain Wheel Operator• Double Block and Bleed
NDE Testing Available (In-House) • Dye Penetrant Test• Radiography• PMI (Positive Material Identification)• API Performance Testing
Valve Type Pressure Class Size Range Bonnet Disc Zy-Gear
2"-12" - 107B 150 2"-48" Bolted OS&Y Flex
14"-24" - 207B2"-10" - 107B
Gate 300 2"-30" Bolted OS&Y Flex 12"- 20" - 207B24" - 307B
2"- 6" - 107B600 2"-24" Bolted OS&Y Flex 8"-12" - 207B
14"-24" - 307B150 2"-14" Bolted OS&Y Plug 2"-12" - 207B
Globe 300 2"-12" Bolted OS&Y Plug 2"-12" - 207B600 2"-8" Bolted OS&Y Plug 2"-12" - 207B150 2"-24" Bolted Swing n/a
Swing Check 300 2"-24" Bolted Swing n/a600 2"-16" Bolted Swing n/a
Note: DSI® Stainless Steel Globe and Check Valves are available in Classes 900 and 1500. Contact your DSI® salesperson for more information.
DSI® Stainless Steel Valves Standard Product Range with Zy-Gear Bevel Gear Chart
4
DSI® offers a broad range of standard commodity StainlessSteel Valves in flanged and weld end connections. This chart
for Zy-Gear operators is based on torque ratings for each valveat maximum differential pressure.
ConformanceNACE Compliance
The demand for valves to be resistant to sulfide stress cracking,and to perform in corrosive hydrocarbon environments, hasbecome commonplace. Facilities handling H2S bearing hydro-carbons have increased dramatically over recent years.Hydrogen sulfide concentration, total system pressure, applica-tion temperature, existence of elemental sulfur, and chloridecontent all have a bearing on appropriate material selection inthis severe environment.
All DSI® Stainless Steel gate, globe and check valves, with stan-dard API trim, have been proven reliable, and fully complywith NACE MR0175 2003. In order to ensure compliance withNACE MR0175 2003, customers must provide application spe-cific operating conditions.
In addition, all DSI® Stainless Steel gate, globe and checkvalves, with standard API trim, fully comply with NACEMR0103 2003 and MR0175 2002 Edition.
Welding
Welding and weld repair operations are conducted in accor-dance with applicable ASTM material specifications and NACE(MR0175 2002 Edition) using procedures and personnel qualifiedto ASME Section IX.
Material Test Reports
Material test reports for DSI®Stainless Steel valves are availableupon request. Material test reports meet the requirements ofEN 10204 3.1b
American Standard Item Description
API 603/API 600 Shell wall thickness and general valve design specificationsASME B16.34 General valve design: Globe and Check valvesASME B16.34 Pressure temperature ratingsASME B16.10 Face-to-face dimensions, End-to-end dimensionsASME B16.5 End flange dimensions, Gasket contact facingASME B16.25 Welding end dimensions
General Design SpecificationsDSI® Stainless Steel Valves are manufactured in strict accordance with the following standards:• API 603/ASME B16.34 • API 600 DesignPlease consult Zy-Tech Global Industries, Inc. for availability.
5
6
DSI® Stainless Steel Metal and Alloy DesignationsFor Corrosion Resistant Valves
Zy-Tech Valves For Cryogenic ServiceApplications such as liquefied natural gas, and other low tem-perature fluids, present special valve functionality challengescaused by extreme temperature conditions. Zy-Tech GlobalIndustries’ DSI® gate, globe and check valves that are designedfor cryogenic services, are specially prepared and designed toovercome these challenges.
Appropriate component materials such as 304 SS (CF8) and 316SS (CF8M) are normally used for body and trim, offering superi-or impact strength, and excellent corrosion resistance and heatloss properties. An extended bonnet and gas column design isalso normally employed to provide thermal insulation at the stemseal and stem packing area. At sufficient length, this design fea-ture places the functionality of the stem seal in the vapor zone ofthe liquid media providing safe and continuous valve operation.
A variety of body, trim, seat and seal materials are available foruse in cryogenic service. Customer specified options, such asbody cavity vent hole, special extension lengths and Kel-Fmaterials, are also available upon request.
Type ASME Designation
304L A351 Grade CF3304 A351 Grade CF8316 A351 Grade CF8M316L A351 Grade CF3M317 A351 Grade CG8M317L A351 Grade CG3M321/347 A351 Grade CF8CAlloy 20 A351 Grade CN7MDuplex/Super Duplex A351 Grade CD4MCu, A890 Grade 4A or 6AHASTELLOY® C/B A494 Grade CW12MW, A494 N12MV
TypeBoilingPoint ˚F
LNG -270Methane, CH4 -258Oxygen, O2 -296Argon, A -303Carbon Dioxide, CO2 -109Air -318Nitrogen, N2 -320Hydrogen, H2 -423Helium, He -452
Table of Liquefied Gases
Class 300 DSI® CastStainless Globe Valve
Class 800 DSI® ForgedStainless Gate Valve
Vapor
Boiling Point
Liquid
HEAT
Typical Gate ValveGas Column
Extension Feature
See Codes Below for Stainless Steel Check Valves
PackingSpecials Material Design
N No Denotation No DenotationNACE (MR0103) for Graphoil® for B16.34NACE (MR0175 Gaskets Design2002 Edition) T H
PTFE Gaskets API 600 Design
7
Specifying DSI® Cast Stainless Steel Valve Figure NumbersIt’s easy to specify DSI® Stainless Steel Valves. Just follow the example and use the figure number chart below to specify the valveyou need.
Stainless Steel Example:
A 16" Gear Operated Class 150 Gate Valve with RTJ Flanged End Connections, A351 CF8M Stainless Steel Body, 316 Stainless SteelTrim with Half Hard Faced Trim Option, Graphoil® Packing and Gaskets, API 603 Design Conformance with no Specials specified.
Valve Type Class Code
150 37Gate 300 23
600 66150 133
Globe 300 141600 161150 137
Swing Check 300 149600 165
DSI G 37 R 16 16 HFSA B C D E F G H I J
Pressure End Body Trim Stellite® Packing and DSI Series Operation Classes Connection Material Material Option GasketMaterial Specials Design
DSI No Denotation See Chart Below No Denotation 04 04 HFS No Denotation EB No Denotationfor Manual for Raised Face A351 CF8 304SS Half Hard Faced for Graphoil® Extended Bonnet for API 603
Operation and Flanged End 04L 04L Trim Packing and LD DesignCheck Valves 1/2 A351 CF3 304LSS U Gaskets Locking Device H
G Weld End 16 16 Full Hard Faced T BP API 600 DesignGear Operated R A351 CF8M 316SS Trim PTFE Packing Bypass
CW RTJ Flanged Ends 16L 16L and Gaskets NChain Wheel FF A351 CF3M 316LSS NACE (MR0175
Operated Flat Faced Ends 17 17 2002 Edition)A A351 CG8M 317SS DD
Motor Operated 17L 17L Double DiscA351 CG3M 317LSS Design
47 47 EQA351 CF8C 347SS Equalization
A20 A20 LineA351 CN7M Alloy 20
8
Gate Valves
Parts And Materials • Class 150, 300 & 600Item Part Name CF8M 316L 317 317L 304 Alloy 20
1 Body A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M2 Bonnet A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M
4Solid Wedge ≤ 11/2" A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M
Flex Wedge ≥ 2" A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M5 Seats A351 CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M6 Stem A276-316 A276-316L A276-317 A276-317L A276-304 B473-N080207 Backseat A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M
8Studs 1/2"-12" A193-B8M A193-B8M A193-B8M A193-B8M A193-B8 A193-B8MStuds ≥ 14" A193-B8 A193-B8 A193-B8 A193-B8 A193-B8 A193-B8
9Stud Nuts 1/2"-12" A194-8M A194-8M A194-8M A194-8M A194-8 A194-8MStud Nuts ≥ 14" A194-8 A194-8 A194-8 A194-8 A194-8 A194-8
10Gasket Cl. 150 Graphite Sheet W/ SS
Gasket Cl.300& Above Spiral Wound / Graphite + 316
11Handwheel 1/2"-12" ASTM A536 ASTM A536 ASTM A536 ASTM A536 ASTM A536 ASTM A536Handwheel ≥ 14" A216-WCB A216-WCB A216-WCB A216-WCB A216-WCB A216-WCB
12 Gland Flange A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M13 Yoke Sleeve A439 D-2 A439 D-2C A439 D-2C A439 D-2C A439 D-2C A439 D-2C14 Handwheel Nut 1/2"-12" Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
15Retainer Nut 1/2"-12" Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless SteelRetainer Nut ≥ 14" A576-1020-Zn A576-1020-Zn A576-1020-Zn A576-1020-Zn A576-1020-Zn A576-1020-Zn
16 Gland A276-316 A276-316L A276-317 A276-317L A276-304 B473-N0802018 Eyebolts A193-B8 A193-B8 A193-B8 A193-B8 A193-B8 A193-B819 Eyebolt Pins A194-8 A194-8 A194-8 A194-8 A194-8 A194-820 Eyebolt Nuts A194-8 A194-8 A194-8 A194-8 A194-8 A194-821 Packing Braided and Die-formed Graphite Rings23 Grease Fitting Steel Steel Steel Steel Steel Steel32 Key 2"-12" A108 A108 A108 A108 A108 A10833 Set Pin Steel Steel Steel Steel Steel Steel34 Washer 1/2" -11/2" 304SS 304SS 304SS 304SS 304SS 304SS
NPS 10" - 24"25 Bearing 16"- 24" Steel Steel Steel Steel Steel Steel26 Stud A193 B8M A193 B8M A193 B8M A193 B8M A193 B8M A193 B8M27 Stud Nut A194 8M A194 8M A194 8M A194 8M A194 8M A194 8M31 Yoke A351 CF8M A351 CF8M A351 CF8M A351 CF8M A351 CF8M A351 CF8M
Class 300
Class 300
Class 150
Class 150
Flexible WedgeNPS 2" And Over
Solid WedgeNPS 1/2"-11/2"
NPS 10" And Over
NPS 16" And Over
Separate BackseatNPS 14"-24"
NPS 1/2"-11/2"
H
D1D2
D3D
Dk
L
t
L1fa
n x ød
H1OPEN
13
6
12
19
7
2
1
4
33141114
11
34
13
2
6
15
13
25
31
26
27
32
15
23
18
20
16
21
10
7
Class 150 Gate Valves(37-37 1/2)
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H H1 Dk t Wt. Lbs. Cv
1/2 0.50 3.50 2.38 4 0.63 1.38 0.31 0.06 4.25 4.25 6.61 7.20 3.94 0.11 5 143/4 0.75 3.88 2.75 4 0.63 1.69 0.34 0.06 4.62 4.62 6.65 7.64 3.94 0.12 6 221 1.00 4.25 3.12 4 0.63 2.00 0.38 0.06 5.00 5.00 7.01 8.35 3.94 0.16 8 34
1 1/2 1.50 5.00 3.88 4 0.63 2.88 0.50 0.06 6.50 6.50 8.90 10.55 5.51 0.19 16 1102 2.00 6.00 4.75 4 0.75 3.62 0.56 0.06 7.00 8.50 11.56 13.89 7.87 0.22 30 200
2 1/2 2.50 7.00 5.50 4 0.75 4.12 0.62 0.06 7.50 9.50 13.70 16.54 7.87 0.22 46 2603 3.00 7.50 6.00 4 0.75 5.00 0.69 0.06 8.00 11.12 15.14 18.50 7.87 0.22 52 4604 4.00 9.00 7.50 8 0.75 6.19 0.88 0.06 9.00 12.00 17.48 21.76 9.84 0.25 80 8256 6.00 11.00 9.50 8 0.87 8.50 0.94 0.06 10.50 15.88 22.80 29.06 9.84 0.28 135 23008 8.00 13.50 11.75 8 0.87 10.62 1.06 0.06 11.50 16.50 28.76 36.88 13.78 0.31 222 4150
10 10.00 16.00 14.25 12 1.00 12.75 1.12 0.06 13.00 18.00 34.67 45.00 17.72 0.34 224 670012 12.00 19.00 17.00 12 1.00 15.00 1.19 0.06 14.00 19.75 40.71 52.99 17.72 0.38 472 970014 13.25 21.00 18.75 12 1.12 16.25 1.31 0.06 15.00 22.50 47.80 58.54 17.72 0.41 685 16,27716 15.25 23.50 21.25 16 1.12 18.50 1.38 0.06 16.00 24.00 54.61 66.89 19.69 0.44 1000 21,56218 17.25 25.00 22.75 16 1.25 21.00 1.50 0.06 17.00 26.00 61.00 74.80 22.05 0.47 1300 28,71520 19.25 27.50 25.00 20 1.25 23.00 1.62 0.06 18.00 28.00 66.06 83.46 27.95 0.51 1500 35,76024 23.25 32.00 29.50 20 1.25 27.25 1.81 0.06 20.00 32.00 78.25 98.50 31.50 0.57 2000 52,165
Dimensional Data (in.) and Flow Coefficient (Cv)
9
10
Class 300 Gate Valves(23-23 1/2)
H
D1
D2D3
D
Dk
L L1fa
n x ød
t
H1OPEN
14
11
34
13
2
6
11
14 33
32
15
13
23NPS 14"-24"
NPS 1/2"-3/4"
Flexible WedgeNPS 2" And Over
Solid WedgeNPS 1/2"-11/2"
NPS 10" And Over
31
26
27
11 14
12
20
8
9
2
19
18
13
1
4
32
16
21
6
15
23
7
10
33
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H H1 Dk t Wt. Lbs. Cv
1/2 0.50 3.75 2.62 4 0.62 1.38 0.50 0.06 5.50 5.50 6.85 7.76 3.94 0.12 7 143/4 0.75 4.62 3.25 4 0.75 1.69 0.56 0.06 6.00 6.00 7.13 8.35 3.94 0.15 8 221 1.00 4.88 3.50 4 0.75 2.00 0.62 0.06 6.50 6.50 9.61 10.79 7.87 0.19 12 34
1 1/2 1.50 6.12 4.50 4 0.88 2.88 0.75 0.06 7.50 7.50 10.91 12.56 7.87 0.19 24 1102 2.00 6.50 5.00 8 0.75 3.62 0.81 0.06 8.50 8.50 12.40 14.67 7.87 0.25 44 200
2 1/2 2.50 7.50 5.88 8 0.88 4.12 0.94 0.06 9.50 9.50 13.46 16.22 7.87 0.25 60 2603 3.00 8.25 6.62 8 0.88 5.00 1.06 0.06 11.12 11.12 15.31 18.70 9.84 0.28 86 4604 4.00 10.00 7.88 8 0.88 6.19 1.19 0.06 12.00 12.00 19.19 23.19 9.84 0.31 134 8256 6.00 12.50 10.62 12 0.88 8.50 1.38 0.06 15.88 15.88 23.15 29.53 13.78 0.38 247 23008 8.00 15.00 13.00 12 1.00 10.62 1.56 0.06 16.50 16.50 30.57 38.82 17.72 0.44 390 4150
10 10.00 17.50 15.25 16 1.12 12.75 1.81 0.06 18.00 18.00 36.67 47.09 19.69 0.50 630 670012 12.00 20.50 17.75 16 1.25 15.00 1.94 0.06 19.75 19.75 42.68 55.16 19.69 0.56 880 970014 13.25 23.00 20.25 20 1.25 16.25 2.06 0.06 30.00 30.00 49.00 64.21 22.05 0.62 1500 16,27716 15.25 25.50 22.50 20 1.38 18.50 2.19 0.06 33.00 33.00 55.79 66.61 24.80 0.69 1750 21,56218 17.00 28.00 24.75 24 1.38 21.00 2.31 0.06 36.00 36.00 61.00 75.16 27.95 0.75 2200 27,88920 19.00 30.50 27.00 24 1.38 23.00 2.44 0.06 39.00 39.00 67.68 83.43 31.50 0.81 3000 34,83724 23.00 36.00 32.00 24 1.62 27.25 2.69 0.06 45.00 45.00 79.92 98.11 35.43 0.94 4200 51,049
Dimensional Data (in.) and Flow Coefficient (Cv)
Class 600 Gate Valves(66-66 1/2)
D1D2
D3D
L1f
La
H
Dk
n x ød
H1OPEN
t
14
11
34
13
2
6
11
14 33
32
15
13
23NPS 1"-4"
NPS 1/2"- 3/4"
Flexible WedgeNPS 2" And Over
Solid WedgeNPS 1/2"-11/2"
NPS 10" And Over
31
26
27
NPS 6" And Over
15
13
25
11 14 33
12
20
8
9
2
1
4
19
18
13
5
15
21
6
23
7
10
16
11
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H H1 Dk t Wt. Lbs. Cv
1/2 0.50 3.75 2.62 4 0.63 1.38 0.56 0.26 6.50 6.50 — — — 0.13 8.3 143/4 0.75 4.62 3.25 4 0.75 1.69 0.62 0.26 7.50 7.50 — — — 0.16 15 221 1.00 4.88 3.50 4 0.75 2.00 0.69 0.26 8.50 8.50 — — — 0.19 20 34
1 1/2 1.50 6.12 4.50 4 0.88 2.88 0.88 0.26 9.50 9.50 — — — 0.22 38 1102 2.00 6.50 5.00 8 0.75 3.62 1.00 0.26 11.50 11.50 13.23 15.39 7.87 0.25 80 200
2 1/2 2.50 7.50 5.88 8 0.88 4.12 1.12 0.26 13.00 13.00 15.98 18.74 9.84 0.28 105 2603 3.00 8.25 6.62 8 0.88 5.00 1.25 0.26 14.00 14.00 18.23 21.61 9.84 0.31 110 4604 4.00 10.75 8.50 8 1.00 6.19 1.50 0.26 17.00 17.00 21.73 25.87 13.78 0.38 220 8256 6.00 14.00 11.50 12 1.13 8.50 1.88 0.26 22.00 22.00 30.00 36.38 19.69 0.50 650 23008 7.87 16.50 13.75 12 1.26 10.62 2.19 0.26 26.00 26.00 35.55 43.86 23.62 0.62 800 4150
10 9.75 20.00 17.00 16 1.38 12.75 2.50 0.26 31.00 31.00 38.58 49.02 29.53 0.75 1400 670012 11.75 22.00 19.25 20 1.38 15.00 2.62 0.26 33.00 33.00 48.39 60.87 29.53 0.91 1880 970014 12.87 23.75 20.75 20 1.50 16.25 2.75 0.26 35.00 35.00 55.12 64.09 31.50 0.97 2110 15,36716 14.75 27.00 23.75 20 1.63 18.50 3.00 0.26 39.00 39.00 60.83 71.06 35.43 1.09 2612 20,17218 16.50 29.25 25.75 20 1.75 21.00 3.25 0.26 43.00 43.00 69.29 78.11 35.43 1.22 3690 26,27320 18.25 32.00 28.50 24 1.75 23.00 3.50 0.26 47.00 47.00 73.62 79.92 42.99 1.34 4890 32,14124 22.00 37.00 33.00 24 2.00 27.25 4.00 0.26 55.00 55.00 85.83 82.80 42.99 1.59 7810 46,707
Dimensional Data (in.) and Flow Coefficient (Cv)
12
Globe Valves
Class 300Cryogenic Extended Stem
Class 300
Parts And Materials • Class 150, 300 & 600Item Part Name CF8M 316L 317 317L 304 Alloy 20
1 Body A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M2 Bonnet A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M4 Disc A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M5 Seat A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M6 Stem A276-316 A276-316L A276-317 A276-317L A276-304 B473-N080207 Backseat A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M8 Studs A193-B8M A193-B8M A193-B8M A193-B8M A193-B8 A193-B8M9 Stud Nuts A194-8M A194-8M A194-8M A194-8M A194-8 A194-8M
10Gasket Cl. 150 GHE Graphite Sheet W/SS
Gasket Cl.300&Above Spiral Wound / Graphite + 31611 Stem Lock Nut A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M31 Handwheel ASTM A536 ASTM A536 ASTM A536 ASTM A536 ASTM A536 ASTM A53632 Gland Flange A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M33 Yoke Sleeve A439 D-2C A439 D-2C A439 D-2C A439 D-2C A439 D-2C A439 D-2C34 Handwheel Nut A194-8 A194-8 A194-8 A194-8 A194-8 A194-836 Gland A276-316 A276-316L A276-317 A276-317L A276-304 B473-N0802038 Eyebolts A193-B8 A193-B8 A193-B8 A193-B8 A193-B8 A193-B839 Eyebolt Pins A194-8 A194-8 A194-8 A194-8 A194-8 A194-840 Eyebolt Nuts A194-8 A194-8 A194-8 A194-8 A194-8 A194-841 Packing Braided and Die-formed Graphite Rings52 Washer 304SS 304SS 304SS 304SS 304SS 304SS
Class 150 Globe Valves(133-133 1/2)
D1D2
D3D
L1
f
L
a
H
Dk
n x ød
H1OPEN
TACK WELD
TACK WELD
t
31 34 52
7
9
10
2
1
6
11
4
5
8
33
40
39
38
36
32
21 B
21 A
13
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H H1 Dk t Wt. Lbs. Cv
1/2 0.50 3.50 2.38 4 0.62 1.38 0.31 0.06 4.25 4.25 6.10 6.72 3.94 0.11 5 33/4 0.75 3.88 2.75 4 0.62 1.69 0.34 0.06 4.62 4.62 6.31 6.92 3.94 0.12 6.5 41 1.00 4.25 3.12 4 0.62 2.00 0.38 0.06 5.00 5.00 6.38 6.96 3.94 0.16 10 6
1 1/2 1.50 5.00 3.88 4 0.62 2.88 0.50 0.06 6.50 6.50 7.75 8.54 5.51 0.19 20 142 2.00 6.00 4.75 4 0.75 3.62 0.56 0.06 8.00 8.00 9.02 10.26 7.87 0.22 27 33
2 1/2 2.50 7.00 5.50 4 0.75 4.12 0.62 0.06 8.50 8.50 10.35 11.63 7.87 0.22 40 653 3.00 7.50 6.00 4 0.75 5.00 0.69 0.06 9.50 9.50 11.10 12.62 7.87 0.22 50 1004 4.00 9.00 7.50 8 0.75 6.19 0.88 0.06 11.50 11.50 13.30 14.93 9.84 0.25 83 1706 6.00 11.00 9.50 8 0.88 8.50 0.94 0.06 16.00 16.00 15.41 16.41 9.84 0.28 154 3758 8.00 13.50 11.75 8 0.88 10.62 1.06 0.06 19.50 19.50 19.26 23.25 13.78 0.31 295 710
10 10.00 16.00 14.25 12 1.00 12.75 1.12 0.06 24.50 24.50 23.27 27.72 17.72 0.34 490 100012 12.00 19.00 17.00 12 1.00 15.00 1.19 0.06 27.50 27.50 26.14 31.69 17.72 0.38 715 1720
Dimensional Data (in.) and Flow Coefficient (Cv)
14
Class 300 Globe Valves(141-141 1/2)
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H H1 Dk t Wt. Lbs. Cv
1/2 0.50 3.75 2.62 4 0.63 1.38 0.50 0.06 6.00 6.00 6.85 7.36 3.94 0.12 6.5 33/4 0.75 4.62 3.25 4 0.75 1.69 0.56 0.06 7.00 7.00 6.85 7.36 3.94 0.15 11.3 41 1.00 4.88 3.50 4 0.75 2.00 0.62 0.06 8.00 8.00 7.56 8.03 5.51 0.19 13.1 6
1 1/2 1.50 6.12 4.50 4 0.87 2.88 0.75 0.06 9.00 9.00 8.90 9.61 6.30 0.19 26 142 2.00 6.50 5.00 8 0.75 3.62 0.81 0.06 10.50 10.50 10.33 11.28 7.87 0.25 45 33
2 1/2 2.50 7.50 5.88 8 0.87 4.12 0.94 0.06 11.50 11.50 11.46 12.72 7.87 0.25 70 653 3.00 8.25 6.62 8 0.87 5.00 1.06 0.06 12.50 12.50 12.57 13.85 9.84 0.28 87 1004 4.00 10.00 7.88 8 0.87 6.19 1.19 0.06 14.00 14.00 14.75 16.29 9.84 0.31 130 1706 6.00 12.50 10.62 12 0.87 8.50 1.38 0.06 17.50 17.50 19.25 21.63 13.78 0.38 252 3758 8.00 15.00 13.00 12 0.98 10.62 1.56 0.06 22.00 22.00 23.50 26.96 17.72 0.44 495 710
10 10.00 17.50 15.25 16 1.13 12.75 1.81 0.06 24.50 24.50 26.02 30.47 23.62 0.50 810 100012 12.00 20.50 17.75 16 1.26 15.00 1.94 0.06 28.00 28.00 29.65 35.59 23.62 0.56 1060 1720
Dimensional Data (in.) and Flow Coefficient (Cv)
D1D2
D3D
L1
f
L
a
H
Dk
n x ød
H1OPEN
TACK WELD
TACK WELD
t
31 34 52
7
9
10
2
1
6
11
4
5
8
33
40
39
38
36
32
21 B
21 A
Class 600 Globe Valves(161-161 1/2)
15
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H H1 Dk t Wt. Lbs. Cv
1/2 0.50 3.75 2.62 4 0.63 1.38 0.56 0.26 6.50 6.50 — — — 0.13 8.5 33/4 0.75 4.62 3.25 4 0.75 1.69 0.62 0.26 7.50 7.50 — — — 0.16 13 41 1.00 4.88 3.50 4 0.75 2.00 0.69 0.26 8.50 8.50 — — — 0.19 17 6
1 1/2 1.50 6.12 4.50 4 0.88 2.88 0.88 0.26 9.50 9.50 — — — 0.22 36 142 2.00 6.50 5.00 8 0.75 3.62 1.00 0.26 11.50 11.50 10.33 15.43 7.87 0.25 58 33
2 1/2 2.50 7.50 5.88 8 0.87 4.12 1.12 0.26 13.00 13.00 11.46 17.00 7.87 0.28 140 653 3.00 8.25 6.62 8 0.87 5.00 1.25 0.26 14.00 14.00 12.57 18.82 9.84 0.31 180 1004 4.00 10.75 8.50 8 1.00 6.19 1.50 0.26 17.00 17.00 14.75 20.91 9.84 0.38 260 1706 6.00 14.00 11.50 12 1.13 8.50 1.88 0.26 22.00 22.00 19.25 26.57 13.78 0.50 610 3758 7.88 16.50 13.75 12 1.25 10.62 2.19 0.26 26.00 26.00 23.50 28.39 17.72 0.62 760 710
10 9.75 20.00 17.00 16 1.38 12.75 2.50 0.26 31.00 31.00 26.02 38.27 23.62 0.75 890 100012 11.75 22.00 19.25 20 1.38 15.00 2.62 0.26 33.00 33.00 29.65 42.28 23.62 0.91 1290 1720
Dimensional Data (in.) and Flow Coefficient (Cv)
D1D2
D3D
L1
f
L
a
H
Dk
n x ød
H1OPEN
TACK WELD
TACK WELD
t
31 34 52
7
9
10
2
1
6
11
4
5
8
33
40
39
38
36
32
21 B
21 A
16
Swing Check Valves
Class 300
Parts And Materials • Class 150, 300 & 600Item Part Name CF8M 316L 317 317L 304 Alloy 20
1 Body A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M2 Cover A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M3 Disc A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M4 Arm A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M5 Seat A351-CF8M A351-CF3M A351-CG8M A351-CG3M A351-CF8 A351-CN7M6 Arm Pin A276-316 A276-316L A276-317 A276-317L A276-304 B473-N080208 Disc Nut A276-316 A276-316L A276-317 A276-317L A276-304 B473-N08020
10Gasket Cl. 150 Graphite Sheet W/ GHE
Gasket Cl.300&above Spiral Wound / Graphite + 31611 Studs A193-B8M A193-B8M A193-B8M A193-B8M A193-B8 A193-B8M12 Stud Nuts A194-8M A194-8M A194-8M A194-8M A194-8 A194-8M13 Side Plug A276-316 A276-316L A276-317 A276-317L A276-304 B473-N0802014 Split Pin A276-316 A276-316L A276-317 A276-317L A276-304 B473-N0802016 Side Plug Gasket Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel18 Disc Washer Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel20 Eyebolt Steel Steel Steel Steel Steel Steel
Class 150 Swing Check Valves(137-137 1/2)
6
16
13
Hinge Pin Detail
20
3
5
2
10
144 18
1
11
12
8
H
D1D2
D3D
L L1
fa
n x ød
NPS 6" & Over
t
17
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H t Wt. Lbs. Cv
1/2 0.50 3.50 2.38 4 0.63 1.38 0.31 0.06 4.25 4.25 2.72 0.11 4 93/4 0.75 3.88 2.75 4 0.63 1.69 0.34 0.06 4.62 4.62 2.95 0.12 6 101 1.00 4.25 3.12 4 0.63 2.00 0.38 0.06 5.00 5.00 3.41 0.16 8 22
1 1/2 1.50 5.00 3.88 4 0.63 2.88 0.50 0.06 6.50 6.50 3.74 0.19 15 552 2.00 6.00 4.75 4 0.75 3.62 0.56 0.06 8.00 8.00 4.59 0.22 21 82
2 1/2 2.50 7.00 5.50 4 0.75 4.12 0.62 0.06 8.50 8.50 5.26 0.22 30 1703 3.00 7.50 6.00 4 0.75 5.00 0.69 0.06 9.50 9.50 5.89 0.22 43 1704 4.00 9.00 7.50 8 0.75 6.19 0.88 0.06 11.50 11.50 6.69 0.25 68 2956 6.00 11.00 9.50 8 0.87 8.50 0.94 0.06 16.00 16.00 10.35 0.28 128 8308 8.00 13.50 11.75 8 0.87 10.62 1.06 0.06 19.50 19.50 12.19 0.31 226 1525
10 10.00 16.00 14.25 12 1.00 12.75 1.12 0.06 24.50 24.50 14.39 0.34 317 240012 12.00 19.00 17.00 12 1.00 15.00 1.19 0.06 27.50 27.50 16.13 0.38 530 3500
Dimensional Data (in.) and Flow Coefficient (Cv)
6
16
13
Hinge Pin Detail
20
3
5
2
10
144 18
1
11
12
8
H
D1D2
D3D
L L1
fa
n x ød
NPS 6" & Over
t
Class 300 Swing Check Valves(149-149 1/2)
18
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H t Wt. Lbs. Cv1/2 0.50 3.75 2.62 4 0.63 1.38 0.50 0.06 6.00 6.00 3.11 0.12 12 93/4 0.75 4.62 3.25 4 0.75 1.69 0.56 0.06 7.00 7.00 3.35 0.15 16 101 1.00 4.88 3.50 4 0.75 2.00 0.62 0.06 8.50 8.50 3.62 0.19 29 22
1 1/2 1.50 6.12 4.50 4 0.87 2.88 0.75 0.06 9.50 9.50 4.17 0.19 30 552 2.00 6.50 5.00 8 0.75 3.62 0.81 0.06 10.50 10.50 5.61 0.25 42 82
2 1/2 2.50 7.50 5.88 8 0.87 4.12 0.94 0.06 11.50 11.50 6.10 0.25 62 1703 3.00 8.25 6.62 8 0.87 5.00 1.06 0.06 12.50 12.50 7.01 0.28 80 1704 4.00 10.00 7.88 8 0.87 6.19 1.19 0.06 14.00 14.00 7.82 0.31 118 2956 6.00 12.50 10.62 12 0.87 8.50 1.38 0.06 17.50 17.50 11.42 0.38 212 8308 8.00 15.00 13.00 12 0.98 10.62 1.56 0.06 21.00 21.00 13.70 0.44 330 1525
10 10.00 17.50 15.25 16 1.13 12.75 1.81 0.06 24.50 24.50 15.93 0.50 528 240012 12.00 20.50 17.75 16 1.26 15.00 1.94 0.06 28.00 28.00 18.41 0.56 802 3500
Dimensional Data (in.) and Flow Coefficient (Cv)
6
16
13
Hinge Pin Detail
20
3
5
2
10
144 18
1
11
12
8
H
D1D2
D3D
L L1
fa
n x ød
NPS 6" & Over
t
Class 600 Swing Check Valves(165-165 1/2)
19
End Flange
Bolt HoleSize ØD ØD1 ØD2 N Ød ØD3 a f L L1 H t Wt. Lbs. Cv1/2 0.50 3.75 2.62 4 0.63 1.38 0.56 0.26 6.50 6.50 — 0.13 10 93/4 0.75 4.62 3.25 4 0.75 1.69 0.62 0.26 7.50 7.50 — 0.16 18 101 1.00 4.88 3.50 4 0.75 2.00 0.69 0.26 8.50 8.50 — 0.19 24 22
1 1/2 1.50 6.12 4.50 4 0.87 2.88 0.88 0.26 9.50 9.50 — 0.22 40 552 2.00 6.50 5.00 8 0.75 3.62 1.00 0.26 11.50 11.50 7.36 0.25 53 82
2 1/2 2.50 7.50 5.88 8 0.87 4.12 1.12 0.26 13.00 13.00 7.87 0.28 69 1703 3.00 8.25 6.62 8 0.87 5.00 1.25 0.26 14.00 14.00 8.27 0.31 88 1704 4.00 10.75 8.50 8 1.00 6.19 1.50 0.26 17.00 17.00 10.08 0.38 170 2956 6.00 14.00 11.50 12 1.13 8.50 1.88 0.26 22.00 22.00 12.95 0.50 400 8308 7.87 16.50 13.75 12 1.25 10.62 2.19 0.26 26.00 26.00 14.33 0.62 610 1525
10 9.75 20.00 17.00 16 1.38 12.75 2.50 0.26 31.00 31.00 18.27 0.75 995 240012 11.75 22.00 19.25 20 1.38 15.00 2.62 0.26 33.00 33.00 19.13 0.91 1310 3500
Dimensional Data (in.) and Flow Coefficient (Cv)
20
Specify Zy-Tech Global Industries’ DSI® Stainless Steel valve products for yournext project. Discover why more companies are turning to Zy-Tech for
reliable, high performance fluid control products. Visit www.zy-tech.com toresearch and specify Zy-Tech products, and track & order online in real-time.
Pressure temperature ratings are based on ASME B16.34(1996 edition).
The temperatures shown are that of the pressure-contain-ing shell, which is considered to be the same temperatureas that of the fluid flowing within it.
Special consideration should be given to such items astrim, bonnet gasket material, and packing to assure thatthe rating is merited in all respects.
DSI® Stainless Steel Valves Pressure Temperature Ratings
Maximum Allowable Non-Shock Pressure (PSIG)
ServiceCF8M CF8M CF8M CF8M CF8MCG8M CF8 CG8M CF8 CG8M CF8 CG8M CF8 CG8M CF8
Temperature CF3M CF3M CF3M CF3M CF3M
Temperature ˚F Class 150 Class 300 Class 600 Class 900 Class 1500-20 to 100 275 275 720 720 1440 1440 2160 2160 3600 3600
200 235 230 620 600 1240 1200 1860 1800 3095 3000300 215 205 560 540 1120 1080 1680 1620 2795 2700400 195 190 515 495 1025 995 1540 1490 2570 2485500 170 170 480 465 955 930 1435 1395 2390 2330600 140 140 450 435 900 875 1355 1310 2255 2185650 125 125 445 430 890 860 1330 1290 2220 2150700 110 110 430 425 870 850 1305 1275 2170 2125750 95 95 425 415 855 830 1280 1245 2135 2075800 80 80 420 405 845 805 1265 1210 2110 2015850 65 65 420 395 835 790 1255 1190 2090 1980900 50 50 415 390 830 780 1245 1165 2075 1945950 35 35 385 380 775 765 1160 1145 1930 1910
1000 20 20 350 320 700 640 1050 965 1750 16051050 20 (1) 20 (1) 345 310 685 615 1030 925 1720 15451100 20 (1) 20 (1) 305 255 610 515 915 770 1525 12851150 20 (1) 20 (1) 235 200 475 400 710 595 1185 9951200 20 (1) 20 (1) 185 155 370 310 555 465 925 7701250 20 (1) 20 (1) 145 115 295 225 440 340 735 5651300 20 (1) 20 (1) 115 85 235 170 350 255 585 4301350 20 (1) 20 (1) 95 60 190 125 290 185 480 3101400 20 (1) 20 (1) 75 50 150 95 225 145 380 2401450 20 (1) 15 (1) 60 35 115 70 175 105 290 1701500 20 (1) 10 (1) 40 25 85 55 125 80 205 135
Hydrostatic Shell Test Press. 450 1125 2250 3350 5575Valve Closure Liquid 320 825 1650 2450 4080Test Pressure Air 80 80 80 80 80
Note: (1) For welding end valves only. Flanged end ratings terminate at 1000˚F.
Specify Zy-Tech Global Industries’ DSI® Stainless Steel valve products for yournext project. Discover why more companies are turning to Zy-Tech for
reliable, high performance fluid control products. Visit www.zy-tech.com toresearch and specify Zy-Tech products, and track & order online in real-time.
By acceptance of the goods described herein, the Purchaser expressly acknowledges and agrees as follows:
1. WarrantyThe warranty described below applies only to new or unused goods or goods reconditioned by Zy-Tech Global Industries, Inc.(Seller). The Seller specifically disclaims any warranty for used goods or goods sold as is.
For a period of one (1) year after date of purchase of any of the goods described herein, Seller warrants such goods shall remainfree from failure due to defects in workmanship and materials incorporated therein by or for Seller provided such failure shallnot have been caused or contributed to by improper usage, service or application, improper installation or maintenance, repairs,alterations, or modifications effected by or for the user, misuse, negligence or accident.
In the event of failure for which Seller has assumed warranty obligations hereunder, and provided written notification of suchfailure shall be immediately given to Seller, it agrees to repair, or at its option, to replace the goods sold at its sold expense.
Apart from the warranty and undertaking above set forth, or unless otherwise specifically consented to in writing by Seller, Sellerassumes no obligation or liability for losses, expense or damages, direct or consequential, suffered or incurred as a result of anyfailure of, or defect in, the goods described herein, including but not limited to, such costs, expenses or damages as may result ofany failure of, or defect in, the goods described herein, including but not limited to, such costs, expenses or damages as may resultfrom the necessity to remove, replace, restore or transport the goods from any location or service in which they may be used,regardless of the cause of such failure or defect.
This warranty extends only to the original Purchaser of the goods and is the only warranty made by Seller in connection there-with. There are no other warranties, express or implied, of any kind given with respect to the goods, their merchantability, fitnessfor any particular purpose or usage, or otherwise, nor is any person authorized to extend on behalf of Seller any form of war-ranty other than that above set forth.
The goods described herein are not sold or distributed by Seller for personal, family or household purposes, nor are they nor-mally suited for use as such.
2. PricesPrices and other terms of sale where set forth in current price sheets are subject to change without notice. Stenographic or cleri-cal errors are subject to correction.
3. Acceptance of Orders and Special OrdersAll orders are subject to acceptance by Seller at its home office, Stafford, Texas, only. No assignment of the Purchaser’s rights maybe made without the written consent of the Seller. Orders for special materials are subject to cancellation only upon agreement tomake payment for the work performed, material used, and a reasonable profit.
4. Terms, Payment and Partial ShipmentAll accounts are payable net 30 days of invoice date. One percent (1%) per month interest charged on accounts after 30 days, ortwelve percent (12%) annually. All accounts are payable in United States dollars, free of exchange, collection, or any other charges.If in the sole discretion of Seller, the financial condition of the Purchaser at any time so requires, Seller retains the right to requirefull or partial payment in advance, to set spending limits for credit accounts or to require other adequate assurances of financialresponsibility. Seller reserves the right to make partial shipments from time to time and render invoices therefore, which shall bedue and payable as provided in said invoices.
5. Freight ChargesUnless otherwise specifically noted, standard shipping charges (calculated by product weight, not including packaging) shall beadded or be in addition to the price quoted and Purchaser agrees to pay the same to Seller.
Zy-Tech Terms and Conditions of Sale continued on page 22.
Zy-Tech General Terms and Conditions of Sale
21
22
6. TaxesUnless otherwise specifically noted, the amount of any sales, use, occupancy, excise tax, or other tax, of any nature, federal, state,or local, for which Seller is legally liable, either initially or through failure of payment by Purchaser, shall be added or be in addi-tion to the price quoted and Purchaser agrees to pay the same to Seller.
7. Unavoidable ConditionsSeller shall not be liable for failure to deliver or delays in delivery occasioned by causes beyond its control, including, withoutlimitation, strikes, lockouts, fires, embargoes, war or other outbreaks of hostilities, acts of God, inability to obtain shipping space,machinery, breakdowns, delays of carriers or suppliers, and governmental acts or regulations.
8. Returns and CancellationsNo product may be returned without Seller’s prior written consent. All goods returned are subject to a handling charge plusfreight in both directions, restocking fees and charges for any required reconditioning, unless otherwise specified in writing bySeller. Overages, shortages and incorrect material claims must be made in writing within ten (10) days of receipt of goods.Cancellation of orders once placed with and accepted by Seller may be made only with its written consent.
9. No WaiverSeller’s failure to insist upon any of the terms, covenants, or conditions listed herein or to exercise any right hereunder shall notbe construed as a waiver or relinquishment of the future performances of any such term, covenant or condition, or the futureexercise of such right or a waiver or relinquishment or waiver of any other term, covenant or condition or the exercise of any otherrights hereunder.
10. Drawings, Data and Confidential InformationThe weights, dimensions, capacities, prices, performance ratings and other data included in catalogues, prospectuses, circulars,advertisements, illustrated matter and price lists constitute a guide. These data shall not be binding except to the extent that theyare by reference expressly included in the purchase order.
Any drawings or technical documents intended for use in the manufacture of machinery, equipment, plants, parts, or other mate-rial and any ancillary services associated therewith (Material), or a part thereof, and submitted to the Purchaser prior or subse-quent to the formation of the purchase order, remain the exclusive property of the Seller. They shall not, without the Seller’s con-sent, be utilized by the Purchaser or copied, reproduced, transmitted or communicated to an unauthorized third party, provided,however, that the said plans and documents shall be the property of the Purchaser if it is expressly so agreed in writing.
Any drawings or technical documents intended for use in the construction of the Material or of part thereof and submitted to theSeller by the Purchaser prior or subsequent to the formation of the purchase order remain the exclusive property of the Purchaser.They shall not, without Purchaser's consent in writing, be utilized by the Seller or copied, reproduced, transmitted or communi-cated to an unauthorized third party.
11. Governing LawThis contract shall be governed by, construed and enforced in accordance with the laws of the State of Texas.
12. Totality of Agreement, Special Provisions, ModificationsThis instrument constitutes the entire agreement of the parties with respect to all matters and things herein mentioned. Purchaserwarrants, represents and agrees that it has inspected the goods and otherwise made inquiry and review, upon its own behalf, con-cerning the nature, characteristics and quality of the materials and workmanship incorporated therein at or prior to delivery, thatit is fully contented and satisfied therewith and has independently determined that the goods are in all respects fit and usable forall purposes for which they are intended to be employed by Purchaser. It is expressly acknowledged and agreed by and betweenthe parties that neither party has, nor is now, relying upon any collateral, prior or contemporaneous agreement, written or oral,assurance or assurances, representation or warranty, of any kind or nature as to or respecting the condition or capabilities of thegoods and the other matters and things, rights and responsibilities herein fixed and described. No modification, waiver or dis-charge of any term or provision of this instrument shall be implied by law, nor shall any alteration, modification or acquittance ofany such term or provision be effective for any purpose unless in writing signed by or upon behalf of the party charged therewith.
Zy-Tech Terms and Conditions of Sale continued on page 23.
Zy-Tech General Terms and Conditions of Sale, Continued
23
Zy-Tech Global Industries, Inc. is dedicated to continuallyimproving their state-of-the-art engineering and manufac-turing capabilities to improve the overall quality of theirproducts and customer service. Zy-Tech’s entire global net-work of flow control experts consist of highly trained tech-nicians, engineers, and superior testing laboratories toensure that all products supplied to our customers are 100%in accordance with industry standards as well as our ownQuality Management System.
Our Quality Commitment...
Note: This catalog is for reference only. All information issubject to change without notice.
Zy-Tech General Terms and Conditions of Sale, Continued12. Totality of Agreement, Special Provisions, Modifications, Continued1. Returns are accepted within 180 days of shipment. Restocking charges for returned standard materials is 15%. Cancellation oforders for standard materials prior to shipment may incur a 10% minimum cancellation charge. Cancellation of non-standard mate-rial may incur up to 100% cancellation charge depending on stage of work in progress. All material returned to Zy-Tech GlobalIndustries must be accompanied by a prior written Returned Goods Authorization (RGA) form and freight must be prepaid. Allmaterial is subject to inspection and final disposition by Zy-Tech Global Industries quality department. A clean up and or re-certi-fication charge may apply to any returned materials. Special items, buyouts, and modified products are non-returnable.
2. All products are subject to prior sales.
3. All sales are subject to Zy-Tech Global Industries standard Terms & Conditions.
13. Export RegulationsZy-Tech products can only be exported in accordance with U.S. Export Administration Regulations and other U.S. legal require-ments. Diversion contrary to U.S. law is prohibited.
Contact yourlocal Zy-Techrepresentativefor more informationabout other DSI® Brandflow control products,or visit our website atwww.zy-tech.com
©2004 Zy-Tech Global Industries, Inc. • DSI® is a registered trademark of Zy-tech Global Industries, Inc. • ZGI-DSI-CSSV-6/04Grafoil® is a registered trademark of Union Carbide Corporation. • Stellite® is a registered trademark of Stoody Deloro Stellite, Inc. • Teflon® is a registered trademark of DuPont.HASTELLOY® is a registered trademark of Haynes International, Inc.
Contact yourlocal Zy-Techrepresentativefor more informationabout other DSI® Brandflow control products,or visit our website atwww.zy-tech.com
10600 Corporate Drive, Stafford, Texas 77477(281) 565-1010 • (800) 231-3530 • Fax (281) 565-3171
Your Local Representative