DRYWALL SCREWS PHILLIPS BUGLE HEAD LAMINATING DRYWALL SCREW For temporary fastening of gypsum board to gypsum in laminated drywall construction Uses No. 2 phillips bit Generally not heat treated Length 1 ½" LAMINATORS® PHILLIPS BUGLE HEAD COARSE THREAD DRYWALL SCREW Standard drywall screws for attaching gypsum board to wood studs Maintains superior holding power and ease of penetration Uses No. 2 phillips bit Lengths 1" to 6" HIGH-TOPPERS® PHILLIPS BUGLE HEAD, SHARP POINT, FINE THREAD DRYWALL SCREWS Standard drywall screws for attaching gypsum board to 20-25ga. commercial quality metal or wood studs Uses No. 2 phillips bit Point designed for fast penetration Known in the “Trades” as the “Multi Purpose Screw” Lengths 1" to 6" TOPPERS® PHILLIPS BUGLE HEAD, SHARP POINT, ALTERNATING HIGH/LOW THREAD DRYWALL SCREW Standard drywall screws for attaching gypsum board to 20-25 ga. commercial quality metal or wood studs Uses No. 2 phillips bit Multiple applications, has varied uses Lengths 1-1/4" to 3” DUAL THREAD 869 South Rohlwing Rd, Unit G Addison, IL 60101 TEL 630-766-1273 FAX 630-766-1275 1-800-262-9680
8
Embed
DRYWALL SCREWS - AWCI SCREWS PHILLIPS BUGLE HEAD LAMINATING DRYWALL SCREW For temporary fastening of gypsum board to gypsum in laminated drywall construction
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DRYWALL SCREWS
PHILLIPS BUGLE HEAD LAMINATING DRYWALL SCREW
For temporary fastening of gypsum board to gypsum in laminated drywall constructionUses No. 2 phillips bitGenerally not heat treatedLength 1 ½"
LAMINATORS®
PHILLIPS BUGLE HEAD COARSE THREAD DRYWALL SCREW
Standard drywall screws for attaching gypsum board to wood studs Maintains superior holding power and ease of penetrationUses No. 2 phillips bitLengths 1" to 6"
HIGH-TOPPERS®
PHILLIPS BUGLE HEAD, SHARP POINT, FINE THREAD DRYWALL SCREWS
Standard drywall screws for attaching gypsum board to 20-25ga. commercial quality metal or wood studsUses No. 2 phillips bitPoint designed for fast penetrationKnown in the “Trades” as the “Multi Purpose Screw”Lengths 1" to 6"
TOPPERS®
PHILLIPS BUGLE HEAD, SHARP POINT, ALTERNATING HIGH/LOW THREAD DRYWALL SCREW
Standard drywall screws for attaching gypsum board to 20-25 ga. commercial quality metal or wood studsUses No. 2 phillips bitMultiple applications, has varied usesLengths 1-1/4" to 3”
DUAL THREAD
869 South Rohlwing Rd, Unit G Addison, IL 60101
TEL 630-766-1273 FAX 630-766-1275
1-800-262-9680
DRYWALL SCREWS
SELF-DRILLING DRYWALL SCREWS
PHILLIPS BUGLE HEAD SELF-DRILLING DRYWALL SCREW
Attaches gypsum board, insulated board and other low density material to 14-20 ga. metalUses No. 2 phillips bitLengths 1" to 3"
DRILLERS®
SELF-DRILLING PHILLIPS PAN HEAD FRAMERS
Attaches 14-20 ga. metal members
Uses No. 2 phillips bitLengths 7/16"
FRAMING DRILLERS®
SELF-DRILLING PHILLIPS PAN HEAD ZINC PLATED FRAMERS
Attaches 14-20 ga. metal. members
Maintains a commercial zinc coating offering low corrosion protection NO CORROSION WARRANTYUses No. 2 phillips bitLengths 7/16"
FRAMING Z-DRILLERS®
PHILLIPS BUGLE HEAD SELF-DRILLING ZINC PLATED DRYWALL SCREW
Attaches gypsum board, insulated board and other low density material to 14-20 ga. metalMaintains a commercial zinc coating offering low corrosion protection NO CORROSION WARRANTYUses No. 2 phillips bitLengths 1" to 3"
Z-DRILLERS®
MODIFIED TRUSS-WAFER HEAD, PHILLIPS DRIVE SHARP POINT, FINE THREAD K-LATH SCREW
Attaches metal lath to 20-25 ga. commercial quality metal studsSubstitutes as framing screwLengths 9/16" to 3"
WAFER HEAD®
SHARP POINT, FINE THREAD PHILLIPS PAN HEAD FRAMER
Attaches 20-25 ga. commercial quality metal membersLength 7/16"
FRAMERS®
SHARP POINT, SQUARE DRIVE FINISHING SCREW
Attaches base or trim over single or double layer of gypsum board to 20-25 ga. metal or wood studsUses No. 1 square bit Lengths 1-5/8", 2-1/4”, 3"
TRIM HEAD®
TOLL FREE1-800-262-9680
SELF-DRILLING ZINC K-LATH SCREWS
Attaches metal lath to 14-20 ga. steel studs Substitutes as a framing screw
Maintains a commercial zinc coating offering low corrosion protection NO CORROSION WARRANTY Uses No. 2 phillips bit
Flex Lite is light weight, easy to use and great for building curved walls, ceilings and soffits. Use it where lateral loads are not an issue and where the higher quality of Flex-C Trac is not needed.
Flex-C Lite
The 3-Legged Dog™ deflection clip eliminates fumbling or drop-ping clips.
3-Legged dog
First, Slide the 3-Legged Dog onto the end of the stud
Second,
and snap into place
Third,
conventional fasteners
Light Gauge framing for use in joint systems. See UL Fire Resistance Directory
(Control No. 6CA8, File No. R20831)
Flex-C Trac *with new Hammer-LockTM feature is designed to make life easier for the builder needing to construct curved walls, barrel vaults and more.
Flex-C Trac w/ Hammer-Lock
" " "
", 8", 10"
", 4", 6", 8", 10"
", 3 5/8" "
This sturdy, well-built product can be easily shaped by hand and installed in a fraction of the time required for traditional methods. It is also well suited for framing curved soffits and light coves as well as acoustical clouds.
Flex-C Arch
" and 6"
" and 4"
' and 8'
Using the Flex-C Trac system technology, the Flex-C Header is pre-assembled, easy to install and load bearing.
Flex-C Header
“Positive Placement” type nailers
" and 6"
Caution: Always use proper eye protection and safety measures when using power tools and air nailers.
Flex-C Angle *with Hammer-Lock™ feature is ideal for use in the construction of deep curved soffits and furr downs or other applications where the second leg of the track would interfere with perpendicular framing components.
Flex-C Anglew/ Hammer-Lock
shape of the angle.
" "
"
TOLL FREE1-800-262-9680
TOLL FREE1-800-262-9680
SCAFFOLD MOVING DEVICE
Crawler 4Piece Package
' or 6' length Item #SP-104-4P 4'
Item #SP-106-4P 6'
Item #SP-204-4P 4'
Item #SP-206-4P 6'
TOLL FREE1-800-262-9680
patent pending truss system
Item # S-204 - 4' 200 Series
Item # S-206 - 6' 200 Series
Item # S-104 - 4' 100 Series
Item # S-104 - 4' 100 Series
Crawler Scaffold
' length
"
either the 100 or 200 Series Scaffold
Item # SP-206-GRP 200 Series
Item # SP-106-GRP 100 Series
Crawler GuardRail Package
soon as the throttle
is released
"
Telescopes to 118" allowing comfortable operation at 7'
platform height
C3 TRAK-IT FUEL CELL
C4 TRAK-IT FUEL CELL
STANDARD PINS (SMOOTH SHANK WITH ROLLED POINT)Designed for use in Concrete and Masonry. All pins are zinc
plated for a minimum level of corrosion resistance.
55022 3/4"
55024 1"
55026 1 1/4"
55028 1 1/2"
TRACK-IT C4 PINS AND WASHEREach box of pins comes packaged with one fuel cell. The 2 9/16"
Sill Plate Pins also come packaged with STICK-E Washers.
55130 3/4" Pin 800 4000
55132 1" Pin 800 4000
55134 1 1/4"
55136 1 1/2"
55145 2 9/16" Sill Plate Pin 800 4000
Fuel Cells are designed to be used with the
-
Ten fasteners are collated on each patented,
plastic top hat-style strip. Use for light duty static ap-
with its unique right angle metering valve, contains enough gas
fasteners and 1 fuel cell.
Trak-It® C3Drywall Track to Steel and Concrete
Trak-It® C4
Everything-In-Between Nailer
This powerful, lightweight tool is the
line of gas powered tools. The only gas
plates to concrete foundation and
footing no problem.
Washer
TOLL FREE1-800-262-9680
ACOUSTICAL EYE LAG SHARP FLUTE, SELF-DRILLING ZINC PLATED FASTENERLAG SCREW
ZINC ACOUSTICAL TOGGLE
Designed for hanging acoustical ceilingsLarge washer assures that toggle will not pull through drywall
ACOUSTICAL TOGGLE
ACOUSTICAL EYE LAG SHARP POINT SELF-TAPPING PLAIN LAG SCREW
Attaches drop ceiling tie wires to wood base material
LAG SCREW
ACOUSTICAL THREADED T
IE-W
IRE
AC
OU
ST
ICA
L T
OG
GLE
TIE
-WIR
E W
ED
GE
AN
CH
OR
TIE
-WIR
E H
AM
ME
R A
NC
HO
RLA
DD
CE
ILIN
G C
LIP
AS
SE
MB
LY
CE
ILIN
G C
LIP
ON
LYS
TA
ND
AR
D C
EIL
ING
CLIP
PO
WE
R P
IN C
EIL
ING
CLIP
PRE-WRAPPEDAll pre-wraps are available in 4’, 6’, 8’, 10’ and