This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
RING TERMINALS FORK TERMINALS LOCKING FORK TERMINALS
Panduit ® Dry-Shrink ™ Heat Shrink TubingRecommended Tubing Size for Common Wire Types• Recommended tubing size
for use with Panduit ®
Pan-Term ® Terminals• Recommended part number
will cover both terminal and wire insulation
*Multiple stud size terminals utilize teardrop shaped stud hole for use with #6, #8, and #10 size studs.◆Expanded wire range for non-insulated ring terminals; type P18 = 22-16, type P14 = 18-14, and type P10 = 14-10.
*For premium nylon replace DNF with DPF.
Note: All warranties, including merchantability and fitness for a particular purpose, are excluded. User is responsible to determine suitability of product for intended use.
Contact Customer Service by email: [email protected] by phone: 800-777-3300 and reference TMSG05
Visit us at www.panduit.comFor more information
WireWire Strip Plier Tools Controlled Cycle
Range Length Hand Tools
Terminal StandardDescription Wire (+1/32-0)
Range (In.)(AWG)
BS Non-Insulated 26-22 1/4 X XButt Splices 22-18 9/32 X X X X X X
16-14 9/32 X X X X X X12-10 9/32 X X X X X X
BSN Nylon Insulated 26-22 1/4 X XButt Splices 22-18 9/32 X X X X X
16-14 9/32 X X X X X X X12-10 9/32 X X X X X X
BSV Vinyl Insulated 22-18 5/16 X X X X X X XButt Splices 16-14 5/16 X X X X X X X X
12-10 5/16 X X X X X X XD Non-Insulated Sleeved 22-18 9/32 X X X X X XDR Barrel Disconnects 16-14 9/32 X X X X X X
(Includes Right Angle Disc.) 12-10 9/32 X X X X X XDR-B Non-Insulated Right Angle 22-18 9/32 X X X XD-MB Female Disc. and 16-14 9/32 X X X X
Non-Insulated Male ButtedSeam Disconnect
D-M Non-Insulated Male 22-18 9/32 X X X X X XBlade Adapters 16-14 9/32 X X X X X X
D-M Non-Insulated Male Disc. 12-10 9/32 X X X X XDNF Nylon Funnel Entry Barrel 22-18 9/32 X X X X
Insulated Disconnects 16-14 9/32 X X X X X X(not .110/.111)
DNF-110 Nylon, Funnel Entry 22-18 7/32 X X XDNF-111 Barrel Insulated Disc. 16-14 9/32 X X X
.110/.111 Tab SizeDNF-FI Nylon, Fully Insulated Disc. 12-10 3/8 X X X X X XDPF-FI Premium Nylon, Fully 12-10 3/8 X X X X X X
Ins. Disc.DNF-FIB Nylon and Premium Grade 22-18 9/32 X X XDNF-FIM Nylon, Fully Insulated, 16-14 9/32 X X XDNF-FIMB Funnel Entry, Male/Female 12-10 3/8 X XDPF-FIB CouplersDPF-FIM (not .110/.111)DPF-FIMBDNF-LPBDPF-LPBDNF-FIB Nylon and Premium Grade 22-18 7/32 X X XDPF-FIB Nylon, Fully Insulated,
Funnel Entry, Disconnect.110/.111 Tab Size
DNF-FIBX Nylon, Expanded Wire 22-18 9/32 X X XEntry Fully Insulated 16-14 9/32 X X
DNG-FL Disco-Lok Nylon 22-18 1/4 X XFully Insulated Disconnect 16-14 1/4 X X
DNG-FB Supra Grip Nylon 22-18 1/4 XFully Insulated Disconnect 16-14 1/4 X
DNF-M Nylon Insulated, Funnel 22-18 9/32 X X X X XEntry, Barrel Insulated, 16-14 9/32 X X X X XMale Disconnects 12-10 9/32 X X X X X X
DNFR-B Nylon Pre-Insulated 22-18 9/32 X XRight Angle Disconnects 16-14 9/32 X X
DV-B Vinyl Insulated 22-18 1/4 X X XButted Seam Disconnects 16-14 1/4 X X X
DV Vinyl Barrel Insulated 12-10 9/32 X X XSleeved Disconnects
DV-M Vinyl Insulated 22-18 9/32 X X X X X XMale Blade Adapters 16-14 9/32 X X X X X X X
DV-MB Vinyl Insulated Butted 22-18 9/32 X X X XSeam Male Disconnects 16-14 9/32 X X X X X
DV-M Vinyl Insulated Male Disc. 12-10 9/32 X X XDV-P Vinyl Insulated 22-18 1/4 X X X X X
Piggyback Disconnects 16-14 1/4 X X X X XDVF Vinyl Funnel Entry 22-18 9/32 X X
Barrel Insulated Disconnect 16-14 9/32 X XJ Non-Insulated J214-312 14-12 1/2 X X
Wire Joints J318-412 18-12 1/2 X XJ216-410 16-10 3/4 X
WireWire Strip Plier Tools Controlled Cycle
Range Length Hand Tools
Terminal StandardDescription Wire (+1/32-0)
Range (In.)(AWG)
JN Nylon JN224-318 24-16 7/16 X X X X XInsulated JN218-216 22-16 7/16 X X X XWire JN418-212 18-12 1/2 X X X XJoints JN314-412 14-12 5/8 X
P-R Non-Insulated 26-22 3/16 X X XP-F Rings, Forks, 22-18 7/32 X X X X X XP-LF Locking Forks, 16-14 7/32 X X X X X XP-SLF Short Locking Forks, 12-10 9/32 X X X X X XP-FF Flanged ForksP-RHT6 High Temperature 22-18 9/32 X X X X X X
Rings 16-14 9/32 X X X X X X12-10 9/32 X X X X X X
P-HDR Non-Insulated 16-12 9/32 X X X X XHeavy Duty
P-P Non-Insulated, 22-18 9/32 X X X X X XPin Terminals 16-14 9/32 X X X X X X
12-10 9/32 X X X X X XP-R Non-Insulated 8 3/8
Large Ring Terminal 6 7/16 Use CT-1701 Crimping Tool4 1/22 1/2
PN-R Nylon and Nylon 26-22 3/16 X X XPN-F Funnel Entry, Forks, 22-18 7/32 X X X XPN-LF Locking Forks, 16-14 7/32 X X X X XPN-FF Flanged Forks 12-10 9/32 X X X XPNF-R (Includes ExpandedPNF-F Insulation)PNF-LFPK-R KYNAR** Rings 22-18 7/32 X X X X X
16-14 7/32 X X X X X12-10 9/32 X X X
PN-HDR Nylon Insulated Heavy 16-12 9/32 X X XPN-HDRX Duty & Nylon
Expanded Insulated HeavyDuty Rings
PN-RX Nylon Insulated 16-14 7/32 X X X X XRings (Expanded 12-10 9/32 X X X XInsulation)
PN-SLF Nylon Insulated 22-18 7/32 X X XPNF-SLF Short Locking Forks 16-14 7/32 X X X X
12-10 9/32 X X XPS Non-Insulated 22-18 5/16 X X X
Parallel Splice 20-16 5/16 X X X14-12 7/16 X X X
PSN Nylon Insulated 22-18 5/16 X XParallel Splice 20-16 5/16 X X X X X
14-12 7/16 X XPV-R Vinyl Insulated 26-22 3/16 X X XPV-F Rings and Forks 22-18 5/16 X X X X X XPV-FF (Includes Expanded 16-14 5/16 X X X X X X XPV-RX Insulation) 12-10 5/16 X X X X X XPV-FXPV-LF Vinyl Insulated 22-18 5/16 X X X X XPV-LFX Locking Forks 16-14 5/16 X X X X X
(Includes Expanded 12-10 5/16 X X X X XInsulation)
PV-HDR Vinyl Insulated 16-12 5/16 X X XPV-HDRX Heavy Duty RingsPV-P Vinyl Insulated 22-18 5/16 X X X X X
Pin Terminals 16-14 5/16 X X X X X12-10 5/16 X X X X X
PV-SLF Vinyl Insulated 22-18 5/16 X X XShort Locking Forks 16-14 5/16 X X X X
12-10 5/16 X XPV-R Vinyl Insulated 8 3/8PV-RX Large Ring 6 7/16 Use CT-720 Tool with CD-720PV8-2 Die
Terminals 4 1/22 1/2
PH Heat Shrink 22-18 5/16BSH Terminals 16-14 5/16
and Splices 12-10 5/16Use CT-310 Crimping Tool
DNH Heat Shrink 22-18 5/16Disconnects 16-14 5/16
12-10 5/16
CT-
100A
CT-
160
CT-
200
CT-
260
CT-
300-
1
CT-
400
CT-
460
CT-
1014
CT-
1015
CT-
1525
CT-
1550
/C
T-15
51
CT-
2500
CT-
1570
CT-
100A
CT-
160
CT-
200
CT-
260
CT-
300-
1
CT-
400
CT-
460
CT-
1014
CT-
1015
CT-
1525
CT-
1550
/C
T-15
51C
T-15
70
CT-
2500
**KYNAR is a registered trademark of Atofina Chemicals, Inc.
Pan-Term® Terminal Crimping ToolsHAND OPERATED – Plier Type
CT-100A ToolCrimps #22 thru #10 insulated and non-insulated terminalproducts. Cuts #4, 6, 8, and 10 screws.
CT-160 ToolCrimps #22 thru #10 insulated and non-insulated terminalproducts. Cuts 3 U.S. and 3 meter bolt sizes.
CT-1550 /CT-1551Crimps most Panduit #22 thru #10 AWG nylon and vinylinsulated terminals and splices. Crimps specific Panduit #22thru #10 AWG nylon and vinyl insulated disconnects.
CT-1570Crimps most Panduit #22 thru #10 AWG and 0.5-6.0mm2
non-insulated terminals and disconnects. Crimps specific Panduit #22 thru #10 AWG and 0.5-6.0mm2
non-insulated splices.
SPECIALTY – Controlled Cycle Type
CT-300-1, CT-1700 (Used with S Series Tubular Terminals),CT-1701, CT-1014, CT-1015, CT-400, CT-460
Battery Powered Crimping Tool CT-2500Crimps Panduit #22 – #10 AWG insulated and non-insulatedterminals, disconnects and splices. Includes tool, twobatteries, a battery charger and carrying case. Crimp headsnot included.