DRY-ICE TECHNOLOGY CONCEPT TECHNOLOGIES SDN BHD Unit 501, Level 5, Block A, Kelana Business Centre, Jalan SS 7/2, Kelana Jaya, 47301 Petaling Jaya, Selangor.

DRY-ICE TECHNOLOGY

CONCEPT TECHNOLOGIES SDN BHD

Unit 501, Level 5, Block A, Kelana Business Centre, Jalan SS 7/2, Kelana Jaya, 47301

Petaling Jaya, SelangorTel : 03-7662 2050 Fax: 03-7662 2054

Concept Technologies Sdn Bhd

• Concept Technologies Sdn Bhd is a global provider of Chemical Maintenance Service, Advance Chemical Maintenance Solution, Industrial Wastewater / Sludge Management, Specialty Chemical

• At Concept Technologies Sdn Bhd we strive to gain a more comprehensive understanding of our customers’ needs. Our customers in turn rely on our technical expertise to improve their production efficiency, lower maintenance cost, and offer environmental friendly solutions.

Some of the Dry-Ice Blasting Users

What is Dry-Ice

• Dry ice, at -78.6°C, is an excellent, lightweight, non-mechanical, non-wetting cooling agent made by taking liquid carbon dioxide from a pressurized storage tank.

• Expanding it at ambient pressure to produce snow. The snow is then compressed with a die to make hard pellets.

• It has nearly twice the cooling power of water ice by weight and three times by volume.

• To be used for Dry-Ice Blasting

Dry-Ice Blasting

Latest Technology

What is Dry-Ice Blasting

• Dry ice blasting is a new cleaning process using solid CO2 pellets (convert directly from a solid blast pellet to a vapor)

• With the dry ice blasting process, CO2 particles are propelled at supersonic speed, impacting and thus cleaning a given surface

• The particles are accelerated by compressed air, just as with other blasting methods.

• Paint Removal (paint & printing industries)

• Rubber and plastic mould cleaning (even when the mould is still in hot condition) (manufacturing, moulding, rubber industries)

• Production machine & production line cleaning & maintenance (manufacturing, pharmaceutical industries)

• Carbon removal, glue removal, rust removal, oil removal, grease removal

• Mixer and machinery cleaning (Bakeries & food industries)

• Injection moulding, Blow moulding & Compression moulding cleaning (Automotive industries)

• Die-casting • Electrical – Live electrical switchgear

Dry-Ice Blasting can be used for

Fiberglas removal

Paint removal

Preform mould &

equipment cleaning

Plastic injection

Transformer Electrical

Pharmaceutical Industry

Printing industry

Aluminium die casting mould cleaning Tire mould cleaning

Paper production line cleaning

Bakery

Foundry

Food Industries

Equipment cleaning

Benefits Of Dry Ice Blasting Technology

• Decreased downtime through cleaning in-place, labor necessity for disassembly, transport of the equipment to and from the designated cleaning area, can be cleaned in-place and hot in most situations and reduce cleaning time

• Dry ice blasting provides a superior cleansing in less time than scrubbing with abrasive pads or wire brushes, no chemical needed

•Elimination of equipment damage, Dry ice is non-abrasive and does not change a surface’s structure

• Reductions in waste disposal because dry ice pellets vaporize upon contact, this alone can result in significant waste and cost reduction non-secondary waste disposal

• Increased safety. Dry ice blasting pellets are non-toxic and non-hazardous, which benefits the environment and eliminates the risk of contamination for employees, end products and equipment

Cleaning Method Comparison

Issue Traditional Dry-Ice Blasting

Equipment

Downtime

Cleaned in dedicated cleaning area; Disassembly / reassembly; Drying time required

Equipment can be cleaned in place; Dry process-equipment restart immediately after cleaning

Hazardous

Waste

Intensive hand scrubbing; Lengthy cleaning; Follow-up cleaning-up can be lengthy

Dramatically reduced-often completed in a quarter of time or less

Quality Cleaning Poor to average Excellent

Equipment Damage

Grit abrasions; Grit contamination; movement of equipment to and from cleaning area

No equipment damage; Preventive maintenance very realistic as labour hours are significantly reduced

Safety Health treats from solvents; Water based cleaning pose hazards around electrical equipment

Standard safety precautions; Dry process-safe around electrical equipment

Cost Cleaner becomes additional hazardous waste; Expensive solvents; Additional labour

Minimal - Cost of Dry-Ice

Blast Cleaning Comparison Chart

Blasting Cleaning

Technique

Waste for Disposal Abrasive Toxic

Electrically Conductive

Dry-Ice NO NO NO NO

Sand YES YES NO* NO

Glass Beads YES YES NO* NO

Walnut Shells YES YES NO* NO

Steam NO NO NO YES

Solvents YES NO YES YES

*Each of these blast-cleaning materials becomes contaminated upon contact if used to clean hazardous objects. These materials are then classified as toxic waste requiring safe disposal along with the removed contaminates

TRIBLAST – 2

• User-friendly control panel easy to use • Single hose - light and easy to use• Supersonic speed• Low weight and compact easy to

transport and move around• Large, insulated hopper - Fewer refills• Adjustable blast pressure from 2-16 bar

- Variable dry-ice feed rate• Better economy• Fine-tune cleaning aggression• Choice of airlock plates• Maximise range of dry ice flow rates

from 10 to 200 kg per hour (supplied standard with 30-80 kg/hr airlock plate)

• Operates with 1.7 to 4 mm pellets• Recommended 2.2 mm pellet maximises

the ..cleaning effect• Fully enclosed stainless steel cabinet• Protects the dry-ice feed system from

dust and water• Robust and easy to clean• Light weight blast gun with safety system

to eliminate accidental start• Choice of blast hose• The flexible: Silicone hose • The industrial: Teflon hose• The economical: PVC Nitril hose - New

revolutionary modular nozzle program• Gives unlimited number of combinations

to optimize blast performance

TRIBLAST – 2

http://www.youtube.com/watch?v=aHhdhrRyQJg

Click below for a Video Demo

CONCEPT TECHNOLOGIES SDN BHDUnit 501, Level 5, Block A, Kelana Business Centre, Jalan SS 7/2,

Kelana Jaya, 47301 Petaling Jaya, SelangorTel : 03-7662 2050 Fax: 03-7662 2054