Dropped Objects Prevention Greater Gulf of Mexico Operational Excellence One Team, One Goal, Incident-Free Operations (IFO)
Dropped Objects Prevention Greater Gulf of Mexico
Operational ExcellenceOne Team, One Goal, Incident-Free Operations (IFO)
1.0 Purpose 1
2.0 Scope 1
3.0 Goal/Objective 2
4.0 Definition 3
5.0 Why Focus on Dropped Objects? 4
6.0 Strategy 5
7.0 Some Examples of Risk Areas 5
8.0 What Creates Dropped Objects? 6
9.0 What Are the Effects of a Dropped Object? 7
10.0 Risk Calculator 8
11.0 Recommended Actions 9
12.0 Secondary Retention 10
13.0 How Can I Personally Prevent Dropped Objects? 11
14.0 Chevron Hazard ID Tool: A 360-Degree Approach 12
15.0 Part of a Complete Safety Package 16
15.1 Hazard Hunt Using the Hazard ID Tool 16
15.2 What Is a Hazard? 17
15.3 What to Do Following a Hazard Hunt 18
15.4 Inspections 19
15.5 Temporary Equipment 19
16.0 Area Ownership 20
17.0 Pre-Job Risk Assessment 20
Contents
Note: The mention of any product or company in this handbook does not constitute an endorsement.
Dropped Objects Prevention | 1
1.0 Purpose
To describe measures to prevent the occurrence of dropped objects, align with industry best practices and meet legislative requirements.
This booklet describes the management of objects that could fall and harm people or damage property during operations performed on all facilities under Chevron operational control. Specific reference is made to the Chevron Global Dropped Objects Management Guidelines (Issue 2010) and cross-industry Dropped Objects Prevention Scheme.
2.0 Scope
2 | Greater Gulf of Mexico Dropped Objects Prevention | 3
The objective of this booklet is simple guidance to eliminate dropped objects through:
y Identification and understanding of potential workplace dropped objects hazards
y Creation of a dropped objects work group
y Understanding the various levels of protection that are available to prevent dropped objects
y Selecting and supplying the right level of mitigation
y Raising the overall awareness of dropped objects
The contents of this booklet apply to all Chevron personnel, contractors and subcontractors working on sites under Chevron operational control.
3.0 4.0Goal/Objective Definition
A dropped object is:
“Any object, with the potential to cause death, injury or equipment/environmental damage, that falls from its previous static position under its own weight.”
When referring to dropped objects, consider:
y Hand tools being used at heights
y Hand tools/equipment left behind after working at height
y Operations conducted at height
y Equipment mounted at a height that, following contact, vibration or environmental conditions, could fall, i.e., piping, lights, cameras, rigging gear, etc.
y Temporary equipment at height
y Where personnel are working on a level directly below the work site
y Lifting operations
4 | Greater Gulf of Mexico Dropped Objects Prevention | 5
6.0 Strategy5.0
7.0
Why Focus on Dropped Objects?
Some Examples of Risk Areas
Dropped objects are regularly the principal causes of incidents in the oil and gas industry and contribute to the total risk level for offshore and onshore facilities.
The consequences of a falling object include:
y Personal injury/death
y Structural damage
y Damage to equipment
y Release of hydrocarbons/fire
y Create site-specific dropped objects work groups.
y Identify and assess problem areas.
y Develop and implement an action plan.
y Monitor results.
y Continually improve.
y Rig derricks/drill floor
y Areas below lifting operations
y Cranes
y Elevated work areas or platforms
y Work spaces where equipment is mounted overhead
y Temporary/portable equipment
y Remotely operated vehicles (ROVs)
y Vessels/barges
y Pipe racks
y Forklift trucks
y Poor stacking of materials
y Ladders
y Scaffolding
6 | Greater Gulf of Mexico Dropped Objects Prevention | 7
y Poor housekeeping
y Scrap and debris left aloft
y No inspection
y No equipment maintenance
y Poor designs
y Weather
y No restraints
y No planning
y Load miscalculation
y Lack of risk assessment
y Errors in space requirements
y Instability
y Ineffective control of equipment or tools taken aloft
y No lanyards on tools used at height
y Improperly secured or inappropriate loads
y No regular inspection procedures
y Becoming blind to changes in activity (dynamic risk assessment)
y Carrying equipment while at height
8.0 9.0What Creates Dropped Objects? What Are the Effects of a Dropped Object?
Even a small object falling from a height can cause serious or fatal injuries.
The potential harm to the individual has been determined using the Dropped Objects Calculator.
The Dropped Objects Calculator was developed with a mathematical model based upon the mass of the object and the height from which it falls.
8 | Greater Gulf of Mexico Dropped Objects Prevention | 9
10.0 11.0Risk Calculator Recommended Actions
1. Create a dropped objects work group specific to the site.
2. Complete a derrick or work site dropped objects inventory with the Chevron HAZARD ID tool.
3. Use the inventory to develop an inspection program.
4. Introduce working at height procedures.
5. Introduce specific toolkits for working at height. Implement processes to account for tools.
6. Raise overall dropped objects identification and mitigation among the workforce.
7. Train relevant personnel to identify and mitigate dropped objects processes.
8. Secure tools from dropping to lower levels.
9. Following Job Safety Environment Assessment (JSA) guidelines, erect signage and physical barriers to restrict access before work is conducted overhead.
10. All rigging risk assessments require consideration of the risks involved in moving equipment at height.
11. Review and revise JSAs for dropped objects potential.
12. Introduce regular dropped objects campaigns.
13. Schedule regular Hazard Hunts.
14. Review handling and securing procedures for tubular components.
15. Introduce area ownership, and hold personnel accountable.
16. Add secondary retention, and consider safety systems, such as safety nets.
17. Inspect personal protective equipment (PPE), for example, safety harness, lanyard and chin straps.
18. Inspect all overhead equipment and locations for loose items that may present a hazard during maintenance activities.
Dropped Height (feet)
Mass (lb)
10 | Greater Gulf of Mexico Dropped Objects Prevention | 11
12.0 13.0Secondary RetentionHow Can I Personally Prevent Dropped Objects?
Secondary Securing Devices
Secondary securing devices (SSDs) secure a component at height, if the primary securing method fails. This could be a secondary safety wire (SSW), a safety net or some other engineered method designed for this function. SSD selection should consider the shock loading that may occur if the primary securing method fails. The integrity of the SSD will deteriorate over time and exposure to the elements and needs to be inspected.
Secondary Safety Systems
Secondary safety systems are fail-safe systems incorporated into equipment to ensure integrity of that equipment if the primary safety system fails. For example, a racking arm runs along a beam and is hoisted and lowered with a wire. If the wire fails, an inertia brake prevents the arm from freefalling to the ground.
y Actively support the dropped objects work group.
y Take responsibility for my actions.
y Look after my colleagues.
y Maintain good housekeeping.
y Stop unsafe activities by using my SWA.
y Make observations and report incidents.
y Review and follow procedures.
y Recognize known hazards, and follow the controls in place.
y Consider dropped objects in all Toolbox Talks.
y Consider dropped objects in all JSAs.
y Check areas after all work is completed, even if it is permit-controlled.
y Participate in Hazard Hunts.
y Investigate all incidents, including near misses.
y Secure all tools and equipment when working at height.
Dropped Objects Prevention | 1312 | Greater Gulf of Mexico
No matter where you work, from offshore platforms to onshore refineries, and in offices around the world, hazards are present. Inadequate identification of those hazards can lead to incidents and injuries across our industry.
Chevron has developed a tool that every employee and contractor can use to identify hazards.
A hazard identification tool should:
1. Be simple and intuitive to use.
2. Provide a platform for continuous and sustained improvement.
3. Be culturally neutral (easily understood in as many different cultures and languages as possible).
4. Improve the individual worker’s ability to identify hazards.
5. Integrate easily with other hazard identification processes (Loss Prevention System [LPS], JSA, Behavior-Based Safety [BBS] and Permit to Work [PTW]).
14.0 Chevron Hazard ID Tool: A 360-Degree Approach
A hazard identification tool should NOT be another process to implement.
Tem
pera
ture
The
mea
sure
men
t of d
iffer
ence
s in
the
ther
mal
en
ergy
of o
bjec
ts o
r the
env
ironm
ent,
whi
ch th
e hu
man
bod
y se
nses
as
eith
er h
eat o
r col
d.Ex
ampl
es: o
pen
flam
e; ig
nitio
n so
urce
s; h
ot o
r col
d su
rface
s, li
quid
s, o
r gas
es; s
team
; fric
tion;
and
ge
nera
l env
ironm
enta
l and
wea
ther
con
ditio
ns
Ch
em
ical
The
ener
gy p
rese
nt in
che
mic
als
that
inhe
rent
ly, o
r th
roug
h re
actio
n, h
as th
e po
tent
ial t
o cr
eate
a
phys
ical
or h
ealth
haz
ard
to p
eopl
e, e
quip
men
t, or
the
envi
ronm
ent.
Exam
ples
: fla
mm
able
vap
ors,
reac
tive
haza
rds,
ca
rcin
ogen
s or
oth
er to
xic
com
poun
ds, c
orro
sive
s,
pyro
phor
ics,
com
bust
ible
s, o
xyge
n-de
ficie
nt
atm
osph
eres
, wel
ding
fum
es, a
nd d
usts
Bio
log
ical
Livi
ng o
rgan
ism
s th
at c
an p
rese
nt a
haz
ard.
Exam
ples
: ani
mal
s, b
acte
ria, v
iruse
s, in
sect
s,
bloo
d-bo
rne
path
ogen
s, im
prop
erly
han
dled
food
, an
d co
ntam
inat
ed w
ater
Rad
iati
on
The
ener
gy e
mitt
ed fr
om ra
dioa
ctiv
e el
emen
ts o
r so
urce
s an
d na
tura
lly o
ccur
ring
radi
oact
ive
mat
eria
ls
(NO
RM
).Ex
ampl
es: l
ight
ing
issu
es, w
eldi
ng a
rcs,
sol
ar ra
ys,
mic
row
aves
, las
ers,
X-ra
ys, a
nd N
OR
M s
cale
Sou
nd
Soun
d is
pro
duce
d w
hen
a fo
rce
caus
es a
n ob
ject
or
subs
tanc
e to
vib
rate
and
the
ener
gy is
tran
sfer
red
thro
ugh
the
subs
tanc
e in
wav
es.
Exam
ples
: equ
ipm
ent n
oise
, im
pact
noi
se, v
ibra
tion,
hi
gh-p
ress
ure
rele
ase,
and
the
impa
ct o
f noi
se to
co
mm
unic
atio
n
Gra
vity
The
forc
e ca
used
by
the
attra
ctio
n of
all
othe
r m
asse
s to
the
mas
s of
the
earth
.
Exam
ples
: fal
ling
obje
ct, c
olla
psin
g ro
of, a
nd a
bo
dy tr
ippi
ng o
r fal
ling
Mo
tio
nTh
e ch
ange
in p
ositi
on o
f obj
ects
or s
ubst
ance
s.
Exam
ples
: veh
icle
, ves
sel,
or e
quip
men
t m
ovem
ent;
flow
ing
wat
er; w
ind;
and
bod
y po
sitio
ning
whe
n lif
ting,
stra
inin
g, o
r ben
ding
Mech
an
ical
The
ener
gy o
f the
com
pone
nts
of a
mec
hani
cal
syst
em, i
.e.,
rota
tion,
vib
ratio
n, o
r mot
ion
with
in a
n ot
herw
ise
stat
iona
ry p
iece
of e
quip
men
t or
mac
hine
ry.
Exam
ples
: rot
atin
g eq
uipm
ent,
com
pres
sed
sprin
gs, d
rive
belts
, con
veyo
rs, a
nd m
otor
s
Ele
ctri
cal
The
pres
ence
and
flow
of a
n el
ectri
c ch
arge
.
Exam
ples
: pow
er li
nes,
tran
sfor
mer
s, s
tatic
ch
arge
s, li
ghtn
ing,
ene
rgiz
ed e
quip
men
t, w
iring
, an
d ba
tterie
s
Pre
ssu
reE
nerg
y ap
plie
d by
a li
quid
or g
as th
at h
as b
een
com
pres
sed
or is
und
er a
vac
uum
.
Exam
ples
: pre
ssur
e pi
ping
, com
pres
sed
cylin
ders
, co
ntro
l lin
es, v
esse
ls, t
anks
, hos
es, a
nd p
neum
atic
an
d hy
drau
lic e
quip
men
t
Haz
ard I
den
tifi
cati
on
Tool
Hie
rarc
hy
of
Con
trols
Haz
ard
A co
nditi
on o
r act
ion
that
ha
s th
e po
tent
ial f
or a
n un
plan
ned
rele
ase
of, o
r un
wan
ted
cont
act w
ith,
an e
nerg
y so
urce
that
may
re
sult
in h
arm
or i
njur
y to
pe
ople
, pro
perty
, or t
he
envi
ronm
ent .
1. R
emov
e th
e en
ergy
sou
rce
2. P
reve
nt th
e re
leas
e of
ene
rgy
3. P
rote
ct fr
om th
e re
leas
e
4. U
se S
top
Wor
k A
utho
rity
© 2
00
8 C
hev
ron
En
erg
y Te
chn
olo
gy
Co
mpa
ny. A
ll ri
gh
ts r
eser
ved
. CB
RE
S/I
DC
070
360
10
/08
Po
ster
B -
En
glis
h
Dropped Objects Prevention | 1514 | Greater Gulf of Mexico
Hazard ID Tool Purpose:
y Increase awareness of energy sources that present hazards in the workplace.
y For dropped objects, identify and eliminate gravity hazards through a focused Hazard Hunt.
Gravity Hazard Examples:
y Crane loads being lifted
y Falling objects, like tools overhead
y Body trips or falls
Are there any gravity energy conditions at your location that could pose a hazard?
y Areas routinely occupied under potential falling objects, such as overhead loads or tools? Are they identified?
y Areas requiring fall protection PPE?
y Surfaces slippery or wet from weather conditions, water or oil spills?
y Stairs and ramps with loose or missing handrails or damaged tread?
y Surface protrusions or loose surfaces, such as thresholds, cover plates or grating or unsecured floor mats?
This simple tool is a wheel featuring graphic icons illustrating specific sources of energy that, if not properly handled, could lead to injury or damage to property or the environment.
Energy sources are always present in the environment. Every aspect of our daily life requires the use of energy in one form or another. However, some energy sources can contribute to the dropped object hazard.
Those energy sources are:
y Gravity – Enables objects to fall, roofs to collapse and people to trip and fall
y Motion – The movement of vehicles, vessels, water, wind or even body movement
y Mechanical – Rotating equipment, drive belts, conveyors, motors or compressed springs
y Electrical – Including power lines, transformers, static charges, lightning, wiring and batteries
y Pressure – Piping, compressed cylinders, tanks, hoses, pneumatic and hydraulic equipment
y Temperature – Including ignition sources, hot or cold surfaces, steam, friction and weather
y Chemical – Vapors, toxic compounds, combustibles, corrosives, welding fumes and dusts
y Biological – Bacteria, viruses, animals, insects, and contaminated food or water
y Radiation – Including solar rays, microwaves, X-rays and welding arcs
y Sound – Equipment noise, vibration, high-pressure release and even voice communication
16 | Greater Gulf of Mexico Dropped Objects Prevention | 17
15.0
15.1
15.2Part of a Complete Safety Package
Hazard Hunt Using the Hazard ID Tool
What Is a Hazard?
The Hazard Identification Tool has been designed as either a stand-alone resource or to augment existing processes such as safe work practices, JSA and PTW.
It is important to understand that this is not a process to implement. It’s a tool that can enhance our existing processes by strengthening our ability to recognize hazards.
Purpose
y Increase awareness of energy sources that present hazards in the workplace.
y Identify and eliminate motion hazards through focused Hazard Hunts.
A hazard is a condition or action with the potential for an unplanned release of, or unwanted contact with, an energy source that may result in harm or injury to people, property or the environment.
Motion
18 | Greater Gulf of Mexico Dropped Objects Prevention | 19
Gravity
15.3 15.4What to Do Following a Hazard Hunt Inspections
y Use SWA to immediately address the imminent hazards.
y Prioritize hazards and identify actions required to eliminate or mitigate.
y Enter maintenance items into database.
y Leaders communicate a summary of the Hazard Hunt by email to their immediate manager.
One of the most important aspects of a good dropped objects program is the ability to inspect all equipment aloft.
y Periodic inspections identify potential hazards.
y Report all nonconformities found in these inspections for correction immediately.
15.5 Temporary Equipment
y Any temporary equipment brought into the site is subjected to the same guidelines as fixed equipment.
y Site management ensures inspection of any third-party equipment before installation.
y To ensure all temporary items are accounted for and have been removed, document the temporary equipment.
y Review all temporary equipment to ensure hazards from dropped or falling objects are identified and monitored.
Dropped Objects Prevention | 2120 | Greater Gulf of Mexico
16.0
17.0
Area Ownership
Pre-Job Risk Assessment
Site management should clearly identify all risk areas and assign risk area ownership.
y Divide the location into areas.
y Assign the areas to an individual or group to check the area as often as the level of risk demands.
y Use checklists for consistency.
y Identify actions for each area of concern.
y Deal with all actions.
y Include any transportable or temporary equipment.
y To make the area safe, use SWA if a dropped object is found.
Complete a pre-job risk assessment such as a JSA before beginning any job/task, with the following goals in mind:
y Identify any dropped object hazards before starting a job or task and communicate these at a toolbox talk.
y Include discussions on tools and equipment in the JSA.
y Ensure all personnel are involved in the discussion, understand the associated hazards and implement the mitigation.
y Include the use of a dropped objects checklist.
Dropped Objects Observations
Operational Excellence One Team, One Goal, Incident-Free Operations (IFO)
22 | Greater Gulf of Mexico
Dropped Objects Observations
Operational Excellence One Team, One Goal, Incident-Free Operations (IFO)