Driveline Components Catalog Flange Yokes J300P-2 March 2012 Supersedes Section 2 Dated January 2008 Find the flange yokes that are built to your vehicle’s original equipment specifications, based on the design and series of the part. Product pictured is intended to be a representation of product category.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Driveline Components CatalogFlange Yokes
J300P-2March 2012
Supersedes Section 2Dated January 2008
Find the flange yokes that are built to your vehicle’s original equipment
specifications, based on the design and series of the part.
Product pictured is intended to be a representation of product category.
2 Important: See Safety Information in General Information Section (J300P-GI)
J300P-2HOW TO USE THIS CATALOG
2). The Series of the Part
• SPL® fl ange yokes that are spring tab or strap design can be found on pages 3 through 4.• Flange yokes that are snap ring or strap design can be found on pages 5 through 8.• Flange yokes that are bearing plate design can be found on pages 9 through 11.• A part number index is provided on page 12.
Footnotes for parts and assemblies that are discontinued, will be discontinued or replaced upon depletion of stock, or not sold separately, are indicated by a symbol next to the part number. Match the symbol to the appropriate status at the bottom of the page. All other footnotes are located immediately below the yoke dimensional data.
To identify a Flange Yoke, two pieces of information are needed:
1). The Design of the Part
SNAP RING BEARING PLATE BEARING STRAP
J300P-2 Spicer Life Series™ Flange Yokes
3 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number
Figure 4
Figure 1
Figure 5
Figure 2
Figure 6
Figure 3 Side View of Figures 1, 2 & 4
Side View of Figures 3, 5 & 6
Important: See Safety Information in General Information Section (J300P-GI)
SPL90 SERIES E-5.380 (HR STYLE 4.958) D-1.625 USE KIT NO. SPL90X 5.906 5.118 .478-D 8 3.544F 3.281 2 90-2-29
Mates with std. 1710 series companion fl ange Continued on next page
J300P-2Spicer Life Series™ Flange Yokes
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number
4 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
5 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number
Important: See Safety Information in General Information Section (J300P-GI)
1000 SERIES E-1.500 D-.938 USE KIT NO. 5-170X 3.375 2.750 .312-D 4 2.250M 1.562 1 10-2-29
1100 SERIES E-2.656 D-.938 USE KIT NO. 5-101X OR 5-111X 3.375 2.750 .312-D 4 2.250F 1.188 1 1-2-49• 3.375 2.750 .312-D 4 2.250M 1.188 1 1-2-39
1210 SERIES E-2.688 D-1.062 USE KIT NO. 5-443X OR 5-736X 3.406 2.750 .328-D 4 2.250M 1.484 1 2-2-899
Fits several Nissan & Toyota pick-up trucks 3.710 3.125 .334-D 4 2.250M 1.200 1 2-2-1419•
5001902 was replaced by 2-2-01902 ; Bolts holes are equally spaced 4.330 3.661 .446-D 4 1.811M 1.634 1 2-2-01902
Bolts holes are equally spaced Continued on next page
J300P-2Flange YokesSnap Ring Design
Figure 1 Figure 2
Figure 3
6 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number1310 SERIES (Continued) E-3.469 D-1.062 USE KIT NO. 5-153X, 5-785X, 5-810X, 5-1200X 4.500 3.500 .500-D 4 2.000F 1.650 1 2-2-939
Bolts holes are equally spaced Continued on next page
J300P-2 Flange YokesSnap Ring Design
7 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number1330 SERIES (Continued) E-3.875 D-1.062 USE KIT NO. 5-213X, 5-790X, 5-812X, 5-1203X 5.360 4.251 .500-D 4 2.560F 1.618 1 5002313
Bearing strap style yoke w/brake pilot and bolt pattern 6.875 6.125 .375-D 8 6.875M 2.000 2 3-2-309
Flange has pilot for brake
J300P-2Flange YokesSnap Ring Design
Figure 1 Figure 2
Figure 3
8 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number1480 SERIES E-4.438 D-1.375 USE KIT NO. 5-188X, 5-803X OR 5-804X 5.354 4.252 .509-D 4 2.680F 1.800 1 3-2-1769
Bolt holes are equally spaced. Part has hole thru center. 5.750 4.750 .500-D 4 3.750M 2.000 1 3-2-479 5.850 4.750 .510-D 4 2.953F 2.000 1 3-2-1869
Flange has pilot for brake 6.875 6.125 .386-D 8 5.312M 2.000 2 4-2-699
Flange has pilot for brake 6.875 6.125 .406-D 8 5.312M 2.000 2 4-2-1109 7.000 6.124 .509-D 8 3.375F 2.000 2 4-2-1159
J300P-2 Flange YokesBearing Plate Design
9 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number
Figure 1
Figure 4
Figure 3
Figure 6
Figure 2
Figure 5
Side View of Figures 1, 2, 4 & 6
Side View of Figures 3 & 5
Important: See Safety Information in General Information Section (J300P-GI)
1610 SERIES E-5.312 D-1.875 USE KIT N0. 5-279X, 5-674X 6.875 6.125 .375-D 8 5.312M 2.750 2 5-2-599
Flange has pilot for brake 6.875 6.125 .375-D 8 5.312M 1.875 2 5-2-989
Flange has pilot for brake 6.875 6.125 .375-D 8 5.312M 2.750 5 5-2-599-1
Flange has pilot for brake 8.000 7.250 .375-D 8 7.750M 2.000 2 6-2-769 8.000 7.250 .375-D 8 7.750M 3.000 5 6-2-749-1
Part has opening cast thru web Continued on next page
J300P-2Flange YokesBearing Plate Design
10 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number
11 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued Part is available until supply is exhausted Not sold separately
A B - Bolt Holes C G Flange or Bolt Diameter Number Pilot Diameter Flange Illustration Spicer Swing Circle D-Drilled of M-Male Face to Figure Part Diameter Diameter T-Tapped Holes F-Female Centerline Number1880 SERIES E-8.094 D-2.188 USE KIT NO. 5-308X 9.562 8.250 .625-D 8 7.000M 2.500 1 8-2-119 9.562 8.250 .625-D 8 7.000M 3.500 1 8-2-109
J300P-2PART NUMBER INDEX
12 Important: See Safety Information in General Information Section (J300P-GI)
14 Important: See Safety Information in General Information Section (J300P-GI)
NOTES
J300P-2
15 Important: See Safety Information in General Information Section (J300P-GI)
Dana Holding Corporation strives to publish catalogs that are as accurate and user-friendly as possible. Continuous improvement is our ongoing mission. Therefore, we welcome any and all of your comments. Please forward your comments with any suggested improvements or corrections to our Catalog Department via Fax or mail.
Fax: Product Management / Catalog Department (419) 866-3925
Mail: Dana Holding Corporation Aftermarket Group Attn: Product Management / Catalog Department PO Box 321 Toledo, OH 43697-0321
Comments and Suggested Improvement/Corrections Page Number Part Number
CATALOG COMMENT FORM
J300P-2 Printed in U.S.A.Copyright Dana Limited, 2014. All rights reserved. Dana Limited.