Dr. Youssef Ghaly Hanna Ghaly, M.Eng, Ph.D. Associate Professor of Civil Engineering at Cairo University, EGYPT President and Founder of
Dr. Youssef Ghaly Hanna Ghaly, M.Eng,
Ph.D.
Associate Professor of Civil Engineering at Cairo University,
EGYPT
President and Founder
of
CURRICULUM VITAE
Dr. Youssef Ghaly Hanna Ghaly
Address: 58 Bywood Dr., Etobicoke, ON, M9A-1L9
Tel: 416-554-4555
Email: [email protected]
GENERAL
NAME :
LANGUAGES :
PROFESSION :
TITLE :
Youssef Ghaly Hanna Ghaly English - Arabic Structural Engineering Associate Professor and Senior Structural Engineering Consultant
EDUCATION
TIME : SCHOOL : DEGREE : FIELD : TIME : SCHOOL : DEGREE : FIELD : TIME :
SCHOOL :
DEGREE :
From: 1980 To: 1983
McGill University, Montreal, Quebec, Canada. Ph. D. Nonlinear Finite Element Modeling of Reinforced Concrete Structures. Form: 1978 To: 1980 Carleton University, Ottawa, Ontario, Canada. M. Eng. (with Distinction) Application of Boundary Element Method to Certain Problems in Structural Dynamics
From: 1970 To: 1975
Cairo University, Giza, Egypt. B. Sc. – Civil Engineering (Honors)
EXPERIENCE RECORD
ACADEMIC EXPERIENCE
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
From: 1975 To: 1978
Civil Engineering Dept., Cairo University, Giza, Egypt Teaching Assistant Teaching Assistant in the Field of Structural Analysis and Mechanics
Form: 1978 To: 1980
Carleton University, Ottawa, Ontario, Canada. Teaching and Research Assistant Teaching Assistant in the Field of Design of Reinforced Concrete and Steel Structures.
From: 1980 To: 1983
McGill University, Montreal, Canada.
Teaching and Research Assistant
Teaching Assistant in the Field of Structural Design of
Reinforced Concrete Structures.
From: 1983 To: 1990
Cairo University, Giza, Egypt Lecturer, Structural Engineering Dept. Teaching the Subject of Structural Analysis and Mechanics and Carrying out Research in the same Field.
From: 1994 To: Current
Cairo University, Giza, Egypt Associate Professor, Structural Eng. Dept. Teaching the subject of Structural Analysis and Mechanics and Carrying out Research in the same Field.
CONSULTING EXPERIENCE
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
TIME :
EMPLOYER :
POSITION :
TYPE OF WORK :
TIME :
COMPANY :
POSITION :
TYPE OF WORK :
From: 1975 To: 1978 (part-time)
“Arab Consulting Engineers”, Cairo, Egypt. Design Engineer. Contributing to the Design of several Projects, among which:
1) 6th October Bridge in Cairo , Egypt 2) Bani–Sweef Bridge in Bani-Sweef, Egypt. 3) El-Zamalek Bridge, Cairo, Egypt
From: 1983 To: 1990 (part-time)
Prof. Dr. Sabri Samaan Consulting Office Leader of a design team Design and Verification of several Projects, among which: 1) Rod El-Farag Bridge. 2) Helwan Multistory Buildings. 3) Other Projects.
From: 1983 To: 1990 (part-time)
Cairo University, Giza, Egypt
Consulting Engineer (With the Structural Eng. Dept.)
Consulting Services to some Governmental Authorities
From: 1991 To: 1994 & from: 2001 To: 2002
Saudi Diyar Consultants, Jeddah, Saudi Arabia Head of the Structural Dept. (full-time). Design of Several Structures such as Palaces, Hospitals, Hotels and many Governmental and Private Structures.
From: 1995 To: 2000 (part-time)
Prof. Dr. Sabri Samaan Consulting Office Leader of a design team Design and Verification of several Projects, among which: 1) El-Warrak Bridge over the Nile in Egypt. 2) Aswan Cable–Stayed Bridge over the Nile. 3) El-Mouneeb Bridge over the Nile in Egypt.
MISR CONSULTANCY SERVICES:
Founded “Misr Consultancy Services” in 1995 which is a solid, respected mid-sized structural consultancy office that is large enough to offer a wide range of professional services, yet small enough to promise our clients the ‘human touch’. Over the years I have developed a team of engineers who worked under my direct supervision. My office handled the design and/or verification of big commercial and industrial projects as outlined below:
From 2006 to 2010:
Al FAYAH Pre-stressed Concrete Bridge in Abu Dahbi, United Arab Emirates.
The bridge was 4 spans 40 meters each in the downtown of Abu Dahbi.
Design of the bridge according to LRFD design specifications. Design of testing scheme of the bridge after construction.
Al Raha Beach Development Bridges (18 pre-stressed concrete bridges) in Abu Dahbi,
United Arab Emirates
The Bridges were of different number of spans and with different alignment
Verification of the design of the 18 pre-stressed concrete bridges which were designed in different international design offices.
Design and verification processes were according to LRFD design specifications.
Sorfert Fertiliser Complex in Algeria:
Sorfert Algerie is a 1.2 million tpa ammonia/granulated urea plant in the Arzew industrial
zone, Algeria. The plant accouns for one of the largest volumes of fertiliser exports to the
Mediterranean. Design of the reinforced concrete pump station of the project. Design of underground reinforced concrete tunnels for water pipes (2 pipes of
diameter = 1.2ms. each). Verification of the structural design of the different structural components of the
project (steel and reinforced concrete).
Terga Electrical Station in Algeria Electrical station with a cost of 560 million euros to build a 1,200 MW Combined Cycle power plant in
Algeria
Verification of the structural design of the reinforced concrete water tank and
pump station of the project.
Corplease Building at Smart Village in Egypt
12,000 square foot six-storey administrative building
Design of the reinforced concrete skeleton of the project.
Sphinx Building at Smart Village in Egypt
30,000 square foot six-storey pre-stressed concrete building
Design of the required excavation for the 3 basements of the building. Verification of the structural design of the 6 stories pre-stressed concrete
building. Supervision of construction of the building.
From 2011 to 2013:
New Cairo Waste Water Treatment Plant in Egypt
$472 million project wastewater Treatment Plant which is the first public-private partnership (PPP) project in Egypt. The plant has a capacity of 500,000m³/day.
Verification of the structural design of the reinforced concrete units of the plant Evaluation Study of the construction materials used.
From 2013 to 2014:
Seasonal Flights Terminal Building in Cairo Airport, Egypt The terminal building footprint is about 16,000 m2. An area of 12,000 m2 is totally enclosed and air-conditioned whereas the remaining area of 4,000 m2 is comprising a shaded outdoor plaza. In addition, two adjacent facility buildings are designated for providing services to passengers. The building serves 2.5 million passengers per year.
Verification of the structural design of the steel skeleton of the structure.
PUBLICATIONS
Hanna,
Hanna, Hanna,
Y.G. and Humar, J.L., “Boundary Element Analysis of Fluid Domain”, Journal of the Engineering Mechanics Division, ASCE, Vol. 108, No. EM2, April 1982. Y.G. and Mirza, M.S., “Nonlinear Analysis of Reinforced Concrete -Endochronic Theory”, Research Report No. 82-7, McGill University, Montreal, October 1982. Y.G. and Mirza, M.S., “Post-Cracking Behavior of Reinforced Concrete
Hanna, Hanna, Hanna, Hanna, Hanna, Hanna, Hanna, Hanna, Hanna, Hanna,
Hanna,
Shear Panels”, Research Report 82-8, McGill University, Montreal, December 1982. Y.G. and Mirza, M.S., ”Force-Displacement Models for Finite Element Analysis of Reinforced Concrete Structures”, Proceedings of the Canadian Society of Civil Engineers Annual Conference, Edmonton, Alberta, 1982, pp. 353-372. Y.G. and Mirza, M.S., “Finite Element Analysis of Reinforce Concrete“, NJIT-ASCE-ACI, Conference on Advances in Structural Concrete Design, March 1983. Y.G. and Mirza, M.S., “Post-Cracking Behavior of Planar Structures”, 1983 CSCE Canadian Structural Concrete Conference, June 1983. Y.G. and Mirza, M.S., “Finite Element Analysis of Reinforce Concrete Beams”, Report Presented to ACI Committee 435-Deflection of Concrete Structures, March 1983. Y.G., “Adaptability of Plastic Theory to the Analysis of Reinforced Concrete Structures”, The International Conference on Fracture and Damage for Concrete and Rock, Vienna, Austria, July 4-6, 1988. Y.G., Ghabrial, N.S., and Foure, B., “Cracking and Failure of Concrete Subjected to Compression and Torsion", The International Conference on Fracture and Damage for Concrete and Rock, Vienna, Austria, July 4-6, 1988. Y.G., “Plastic Analysis of Reinforced Concrete Frames”, Conference of the Structural Safety, Ain-Shams University, Cairo, Egypt, April 12-14, 1988. Y.G., “Determination of Deformations of Reinforced Concrete Beams Up to Failure”, Conference of the Structural Safety, Ain-Shams University, Cairo, Egypt, April 12-14, 1988. Y.G. and Ghabrial, N.S., “Analysis of Deep Folded Plate Systems”, The Third Arab Structural Engineering Conference, United Arab Emirates University, March 5-8, 1989. Y.G., “Secondary Stresses and Limit States Analysis of Steel Trusses”,
Journal of the Egyptian Society of Engineers, Vol. 28, No. 2, July 1989.
Y.G., “Dynamic Deformations of Bridges Subjected to Smoothly Moving Vehicles”, Journal of the Egyptian Society of Engineers, Vol. 28, No. 3, October 1989.
Hanna, Hanna,
Y.G. and Agour, M.S., “Characteristics of Load Distribution in Slab on Girder Bridges using the Semicontinum Method”, Al-Azhar Engineering 1st Conference, December 9-12,1989. Y.G. and Gad, E.H., “Dynamic Interacting Forces Acting on Highway Bridges due to Moving Vehicles”, Al-Azhar Engineering 1st Conference, December 9-12,1989.
CONFERENCES
Annual Conference of the Canadian Society of Civil Engineers, Edmonton,
Alberta, 1982.
NJIT-ASCE-ACI, Conference on Advances in Structural Concrete Design,
March, 1983.
1983 CSCE Canadian Structural. Concrete Conference, June 1983.
International Conference on Fracture and Damage for Concrete and Rock,
Vienna, Austria, July 1988.
Conference of the Structural Safety, Ain-Shams University, Cairo, Egypt, April
1988.
The Third Arab Structural Engineering Conference, United Arab Emirates
University, March 1989.
Al-Azhar Engineering 1st Conference, December 1989.
MEMBERSHIP OF PROFESSIONAL ORGANIZATIONS:
Member of the Egyptian Syndicate of Professional Engineers.
American Concrete Institute.