Good performance n High capacity ≤ 10.8 m³/h and discharge head ≤ 79.5 m n Long life n Excellent NPSH values Economic solution n Low energy use n Good hydraulic performance n Economic IEC motors n Low acquisition and maintenance costs Smart and compact design n Limited dimensions, thanks to close coupled motor and pump base with compact design n Easy to install - even in small spaces n Fast DIN thread connection (suction side: 1 ¼” discharge side: 1”) n Easily accessible filling and discharge plugs n Suction and pressure connection concentrated on the pump base. Quick exchange of DPHM models without any need for adjustment of piping. dphm quality compact manufacture Material DPHM DPHMC Pump base SS 1.4308 Cast iron JL 1040 Hydraulic system 1.4301 1.4301 Shaft 1.4541 1.4541 Elastomers EPDM NBR Shaft seals Ca / Ce / EPDM Ca / Ce / NBR Plugs PEHD / TPE 1.4301 / EPDM Specifications 50 Hz 60 Hz Capacity Q Up to 9 m 3 /h Up to 10.8 m 3 /h Discharge head H Up to 55 m Up to 79.5 m Liquid temperature T -10 ºC to + 60 ºC Ambient temperature T -20 ºC to + 40 ºC, optionally to +55 ºC Pressure class PN 10 bar DIN Connections (thread) Suction side: 1 ¼” Discharge side: 1” More than 3 million options available In addition to the DPHM, we offer an extensive range of verti- cal, stainless steel centrifugal DPV pumps with the capability to provide customised solutions that perfectly suit your appli- cation. In order to meet requirements with respect to hydraulic operating area range, motor selection, speed control, available shaft seals and connections. If you have any queries about these and other performance aspects, you can always ask DP-Pumps or your DP-Pumps dealer for expert advice. 2/2 0,37kW 2/4 0,37kW 2/6 0,55kW 4/2 0,37kW 4/4 0,55kW 4/6 1,1kW 6/2, 0,37kW 6/4 1,1kW 6/6 1,5kW 0 5 10 15 20 25 30 35 40 45 50 55 60 0 1 2 3 4 5 6 7 8 9 H [m] Q [m3/h] 50 Hz 2 mounting points Economic motors 2/4/6/ stages Easily accessible filling and discharge plugs Thread connections (DIN) In stainless steel or cast iron (JL 1040) With the DPHM we introduce a compact horizontal pump that is not only robust and economical, but efficient and reliable as well. This stainless steel hydraulic assembly is based on our successful DPV range of vertical multi-stage centrifugal pumps - a technology proven to offer trouble-free performance for many years. 2/2 0,37kW 2/4 0,55kW 2/6 0,75kW 4/2 0,55kW 4/4 1,1kW 4/6 1,5kW 6/2, 0,75kW 6/4 1,5kW 6/6 2,2kW 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 0 1 2 3 4 5 6 7 8 9 10 11 H [m] Q [m3/h] 60 Hz All hydraulic components in stainless steel DPMHC (cast iron JL 1040)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Good performance
n High capacity ≤ 10.8 m³/h and
discharge head ≤ 79.5 m
n Long life
n Excellent NPSH values
Economic solution
n Low energy use
n Good hydraulic performance
n Economic IEC motors
n Low acquisition and maintenance costs
Smart and compact design
n Limited dimensions, thanks to close coupled
motor and pump base with compact design
n Easy to install - even in small spaces
n Fast DIN thread connection
(suction side: 1 ¼” discharge side: 1”)
n Easily accessible filling and discharge plugs
n Suction and pressure connection concentrated
on the pump base. Quick exchange of DPHM
models without any need for adjustment
of piping.
dphm quality compact manufacture Material DPHM DPHMC
Pump base SS 1.4308 Cast iron JL 1040
Hydraulic system 1.4301 1.4301
Shaft 1.4541 1.4541
Elastomers EPDM NBR
Shaft seals Ca / Ce / EPDM Ca / Ce / NBR
Plugs PEHD / TPE 1.4301 / EPDM
Specifications 50 Hz 60 HzCapacity Q Up to 9 m3/h Up to 10.8 m3/h
Discharge head H Up to 55 m Up to 79.5 m
Liquid temperature T -10 ºC to + 60 ºC
Ambient temperature T -20 ºC to + 40 ºC, optionally to +55 ºC
Pressure class PN 10 bar
DIN Connections (thread) Suction side: 1 ¼” Discharge side: 1”
More than 3 million options available
In addition to the DPHM, we offer an extensive range of verti-
cal, stainless steel centrifugal DPV pumps with the capability
to provide customised solutions that perfectly suit your appli-
cation. In order to meet requirements with respect to hydraulic
operating area range, motor selection, speed control, available
shaft seals and connections. If you have any queries about
these and other performance aspects, you can always ask
DP-Pumps or your DP-Pumps dealer for expert advice.
2/2 0,37kW
2/4 0,55kW
2/6 0,75kW
4/2 0,55kW
4/4 1,1kW
4/6 1,5kW
6/2, 0,75kW
6/4 1,5kW
6/6 2,2kW
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
0 1 2 3 4 5 6 7 8 9 10 11
H [m]
Q [m3/h]
2/2 0,37kW
2/4 0,37kW
2/6 0,55kW
4/2 0,37kW
4/4 0,55kW
4/6 1,1kW
6/2, 0,37kW
6/4 1,1kW
6/6 1,5kW
0
5
10
15
20
25
30
35
40
45
50
55
60
0 1 2 3 4 5 6 7 8 9
H [m]
Q [m3/h]
50 Hz 60 Hz
2 mounting points
Economic motors
2/4/6/ stages
Easily accessible filling and discharge plugs
Thread connections (DIN)
In stainless steel or cast iron (JL 1040)
With the DPHM we introduce a compact horizontal pump that is
not only robust and economical, but efficient and reliable as well.
This stainless steel hydraulic assembly is based on our
successful DPV range of vertical multi-stage centrifugal pumps
- a technology proven to offer trouble-free performance
for many years.
2/2 0,37kW
2/4 0,55kW
2/6 0,75kW
4/2 0,55kW
4/4 1,1kW
4/6 1,5kW
6/2, 0,75kW
6/4 1,5kW
6/6 2,2kW
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
0 1 2 3 4 5 6 7 8 9 10 11
H [m]
Q [m3/h]
2/2 0,37kW
2/4 0,37kW
2/6 0,55kW
4/2 0,37kW
4/4 0,55kW
4/6 1,1kW
6/2, 0,37kW
6/4 1,1kW
6/6 1,5kW
0
5
10
15
20
25
30
35
40
45
50
55
60
0 1 2 3 4 5 6 7 8 9
H [m]
Q [m3/h]
50 Hz 60 Hz
All hydraulic components in stainless steel
DPMHC (cast iron JL 1040)
4
dphmhorizontal multi-stage centrifugal pump
dp pumps
97013986/1015
the dynamics of water
Reliable
n High-quality material: impellers, conductors
and stainless steel shafts.
n Pump base in stainless steel or
corrosion-resistant cast iron
n Accurate automated manufacturing by
high-tech welding robots
n Use of existing, proven
hydraulic components
Flexible
Transparent number of standard models
n 2, 4 and 6 stages
n Stainless steel / Cast iron
n 1-phase 230 V / 3-phase 230/400 V
n 50 Hz / 60 Hz
n Customised models on request:
fewer impellers, specific seals and
O-rings, such as FPM
n ACS (France) en WRAS (UK)
drinking water quality mark
Typical DPHM applications
n Light industrial applications
n Watertransport
(drinking / non-drinking)
n Pressure boosting for water
(drinking / non-drinking)
n Irrigation (agriculture and horticulture)
n Air conditioning
dp pumpsP.O. Box 282400 AA Alphen aan den Rijn Holland