Melbourne, Australia Drew Price Engineering’s Karting Products Catalogue 2nd Edition •KMK02•
Jan 03, 2016
Melbourne, Australia
Drew Price Engineering’sKarting Products Catalogue
2nd Edition•KMK02•
This catalogue displays products manufactured and/or distributed by DPE.
DPE are wholesalers and distributors only – not retailers.For your nearest DPE products retailer, contact DPE or visit the web site at www.dpeng.com.au
Please note that this catalogue is designed as a helpful visual guide and does not necessarily show every item, part or variation available in DPE’s range. Consult the DPE Price List for full details and pricing of our entire range of karting products. Due to constant development, specifi cations may vary to those shown in this catalogue. Consult the DPE Price List, Brochures or www.dpeng.com.au for the latest product details and specifi cations.
57-59 Nantilla Road, Clayton North, Victoria 3168 AustraliaPostal Address: PO Box 4105, Mulgrave, Victoria 3170 Australia
Ph: (03) 9545 3944 Fax: (03) 9545 3743 (International, Ph: +61 3 9545 3944 Fax: +61 3 9545 3743)FreeCall Sales Fax No. (within Australia only) 1800 670 735
www.dpeng.com.auEmail: [email protected]
57-59 Nantilla Road, Clayton North, Victoria 3168 AustraliaPostal Address: PO Box 4105, Mulgrave, Victoria 3170 Australia
Ph: (03) 9545 3944 Fax: (03) 9545 3743 (International, Ph: +61 3 9545 3944 Fax: +61 3 9545 3743)FreeCall Sales Fax No. (within Australia only) 1800 670 735
www.dpeng.com.auEmail: [email protected]
Welcome to the second edition of the DPE ‘Kartalogue.’
After perusing this new edition you will notice that since the original Kartalogue we
have added many new products, in fact more than 100. We have even added some
entirely new lines of merchandise. So much so, that the Arrow range of karts is now in
a totally separate catalogue. This increased range of products that we can offer you is
now on display, not only within the pages of this Kartalogue, but also on our website
at www.dpeng.com.au
For approaching thirty years now, DPE has specialised exclusively in the sport of
karting, initially only in Australia. During this time, we have established a reputation
for offering quality and innovative products, a high level of customer service, total
support to our dealers and of course, competitive pricing.
We are pleased to say that since the introduction of our first Kartalogue many new
distributors, dealers and clients around the world have joined our network. It is
exciting for us to see our worldwide customer base expanding, particularly over the
last few years. To those new customers, our promise to you is what our existing dealers
have had for many years. I’m confident that once you’ve tried us, you’ll agree.
To all our customers, both new and old, we say thank you, and we look forward to
being of service to you in the near future,
Regards,
DREW PRICE
22
Drew Price Engineering’s desire is to create a mutually beneficial,
long term business relationship. Therefore;
Drew Price Engineering Pty Ltdmakes the following commitments:
• To provide quality products at fair and reasonable prices
• To communicate with you frequently and openly as we build
a win-win business relationship
• To acknowledge any communication to you within a
reasonable amount of time
• To provide friendly, courteous and memorable service
• To respect you and not take your business for granted
• To honour our commitments to you absolutely
• To be honest and act with integrity
In response, as our valued customer you agree as follows:
• To provide feedback in respect to our services and products
• To be honest and open with us to ensure the maximum benefit
from our relationship
• To pay your account with us within the agreed terms
• To advise us frankly and immediately should anything
not be to your satisfaction
2
This catalogue is designed to be used in conjunction with the DPE Price List. When referencing products, the DPE Product Code is shown as •XXXXX•. This code can be directly located in the DPE Price List. In some exploded diagrams, parts are numbered individually.
These numbers can be cross referenced to the DPE Price List, where the Product Code can be located.Due to printing processes, colours in this catalogue may vary slightly from actual items.
Any purchase from Drew Price Engineering Pty Ltd is subject to the Terms & Conditions detailed on pages 92-93 in this catalogue, and as amended from time to time.
PRODUCT/S PAGE
Arrow Karts _______________________________________________________________ 6Airboxes & Accessories _______________________________________________ 8Axles, Bearings & Flanges ___________________________________________ 10Brake Systems & Parts ________________________________________________ 14Bolts, Capscrews, Fasteners etc. __________________________________ 19Brake Discs & Hubs ____________________________________________________ 20Brake & Throttle Cables & Parts _________________________________ 22Carburettors & Parts – Rotax 125 Max ________________________ 24Carburettors & Parts – Walbro ____________________________________ 25Chains _______________________________________________________________________ 26Chainguards ______________________________________________________________ 27Clutches ____________________________________________________________________ 28Driving Apparel – MiR ________________________________________________ 29Driving Apparel – Kartech __________________________________________ 30Badges & Stickers ______________________________________________________ 32Teamwear – Rotax _____________________________________________________ 33Engines & Components _____________________________________________ 36Engines & Components – Rotax 125 Max ___________________ 38Engines & Components – Comer S-80 ________________________ 42Engines & Components – Yamaha ______________________________ 44Engine Components – Kartech ___________________________________ 46Engine Mounts __________________________________________________________ 49Exhausts, Mufflers & Accessories _________________________________ 52Fuel Tanks & Accessories ____________________________________________ 56Kart Chassis – exploded photograph ___________________________ 58Kart Chassis Parts – universal ______________________________________ 60Kart Trolleys, Stands & Covers ____________________________________ 62Lubricants & Cleaners ________________________________________________ 63Nosecones ________________________________________________________________ 64Nassa Panels ______________________________________________________________ 65Sidepods ___________________________________________________________________ 66Seats, Covers & Mounting Hardware __________________________ 68Sprockets, Hubs & Drive Sprockets _____________________________ 70Spark Plugs & Accessories __________________________________________ 72Steering Wheels _________________________________________________________ 74Numbers, Number Plates & Parts _______________________________ 76Sniper Alignment Systems __________________________________________ 77Tools – inc. gauges & accessories _______________________________ 78Alfano Timing System ________________________________________________ 82Bridgestone _______________________________________________________________ 83Tyres _________________________________________________________________________ 84Wheels ______________________________________________________________________ 86Wheel Hubs & Parts ___________________________________________________ 88Gear Ratio/Oil Ratio Charts _________________________________________ 90Clothing Size Conversion Charts _________________________________ 91Terms & Conditions ___________________________________________________ 92Alphabetical Product Index ________________________________________ 94
For nearly 30 years, Drew Price Engineering have been
designing and manufacturing innovative,
high quality kart products including
axle components, bodywork, brake
hardware and, of course, Arrow
chassis’. With success in the USA, Japan,
Australia, New Zealand, the Oceania
Championships and the Rotax Max Grand
Final in Langkawi, Malaysia, Arrow karts and
DPE products are becoming more and more
recognised all over the world.
In our large, modern kart design and
manufacturing facility in Melbourne, Australia
– possibly the largest outside Europe – we carry out most work ‘in-house’. This ensures the highest quality
is achieved and maintained. Our unique combination of modern technology, engineering ingenuity and
clever design provide us with an unparalleled platform from which to design and manufacture some of
the best karts and karting products.
In addition to Arrow karts, we also have our own exclusive ‘Kartech’ range of karting equipment, which
Australiaare reno
their innovatioDPE are no
5
nswned forn and ingenuity…exception!
comprises driving apparel, promotional items, tools,
engine and exhaust components, seats and sprockets
– just to mention a few! DPE are also agents and
distributors for many of Australia’s and the world’s
best karting components, including being the sole
Australian importer of Bridgestone kart tyres and
Rotax kart engines.
With over 30 dedicated staff at DPE, we all have the
same goal – and that’s to put DPE at the head of the
karting industry, both on and off the track.
When we design and manufacture new products, we
have Australian and International Champion drivers
who put our products through rugged test procedures,
ensuring our products can withstand the harshest of
conditions anywhere in the world. Whether it be a
Kartech wheel spacer or an award-winning Australian
chassis, if it’s built by DPE then it’s built to perfection!
DPE – Racing to the front, on and off the track!
Combining years of experience, the
latest technology and many unique
innovations, Arrow karts are among
the very best available.
Over the past 20 years, Arrow karts
have won more Australian National
and State Titles, and other major
meetings, than any other brand
– Australian or International! On
top of that, Arrow has scores of
victories to its name in International
events across the USA, Asia, South
Africa, New Zealand and, of course,
Australia – to mention but a few.
For full details on the range of Arrow Karts, as well as features and specifications, consult the Arrow Karts Catalogue and Brochures or www.dpeng.com.au
6
Above: Claudio Piazza-Musso, winner of Rotax Max Grand Final held in Langkawi, Malaysia, January 2002 – Arrow AX8 30/32
There is an Arrow kart for every class – from sub-
Juniors through to CIK homologated chassis’ and
Shifter karts – all with the same winning pedigree.
DPE and Arrow karts are leaders, not followers,
both on and off the track. Look out for Arrow karts
on a race track near you – no matter where in the
world you are!
Airbox – Rotary type (Black only)•ABRO•(Airbox only) which includes Airbox Rubber Adapter Flange (•ABFL•)
Airbox Rainguard
•ABRG•
High flow type, complete including
strap, for Kartech and KSI airboxes
Airbox Hose Clamp•ABCL•
Suits all airboxes 58-75mm
Air Filter Foam•AF•UNI brand designed for kart engines
Air Filter Clamp & ‘O’ Ring•AFC•Clamp & ‘O’ Ring securely locates and holds air filter (•AF•) to airbox
Air Filter Kit•AFK•Includes •AF• & •AFC•
Airbox Rubber Adaptor Flange•ABFL•Suits all airboxes
Airbox Tube•ABTU•
38mm flange, 23mm ID,
100mm long
Airbox Adaptor•ABAD•
Suits Yamaha engines
Airbox Adaptor(Venturi type)
•ABADV•
New design, CNC machined venturi
adapter to suit Yamaha engines
•AFC••AFCO•
‘O’ Ring only
•AF•
•AFK•Inc. •AF• & •AFC•
99
DPE offer a variety of airboxes and accessories to suit most racing classes worldwide. Made
of strong but lightweight polyethylene plastic, airboxes or inlet silencers are now mandatory
in most countries as a method of reducing noise without affecting performance.
Airbox - Piston Port type (Yellow only)•ABRR• (Airbox only) which includes Airbox Rubber Adapter Flange (•ABFL•)
Airbox - Yamaha type (Red only)•ABYA• (Complete kit) which includes
Hose Clamp (•ABCL•), Airbox Rubber Adapter Flange (•ABFL•) and Airbox
Adaptor (•ABAD•)
•ABY• (Airbox only) which includes Airbox Rubber Adapter Flange (•ABFL•)
accessories
Using only
the finest
materials, we produce
our own range of axles
and bearing flanges to
suit all makes of karts.
All our bearing flanges
are produced on the
latest CNC machinery
to ensure the closest
tolerances are achieved
and maintained.
Free spinning bearings•AXB30• (30mm) •AXB35• (35mm)•AXB40• (40mm) •AXB50• (50mm)•AXB50C• (50mm, to suit 40mm bearing flanges)
Low drag, shielded type offering minimal rolling resistance
Grub Screws•AXGS•
Replacement grubscrews for 25mm, 30mm,
35mm bearings
•AXGS/6•‘Carded’ version, qty 6
•AXGS40•Grubscrews for 40 & 50mm bearings
•AXGS40/6•‘Carded’ version, qty 6
Axle Bearing Flange – Gold
•AXQ40• 40mm gold
Machined from solid billet alloy, for all 40mm karts – includes extra 8mm hole for seat stay
Rubber Sealed type bearings•AXB25• (25mm) •HKAX01• (30mm)Rubber sealed type for low maintenance and long life
For a full listing of our axles, consult the table on the following page, the DPE Price List or www.dpeng.com.au
11
Alloy Bearing FlangeAXQ35• 35mm
Cast alloy bearing flange, including extra hole for seat stay
Alloy Bearing Flange•AXQ30• 30mm gold•AXQ30P• 30mm purple
Machined solid billet alloy bearing flange, including extra hole for seat stay
Axle Bearing Flange Set – Steel•AXBFL25• 25mm •AXBFL30• 30mm
Pressed steel, 2 per set
KeysteelAvailable in long, short
and pegged stylesSee below for details
Alloy Quick Change Bearing Flange
•AXQ25• gold•AXQ25P• purple
Allows 30mm axle to be fitted to chassis with 25mm bearing hangers
Axle Bearing Flange – Gold
•AXQ40• 40mm gold
Machined from solid billet alloy, for all 40mm karts – includes extra 8mm hole for seat stay
Code WxHxL•AXK• 6x6x59mm•AXK300• 6x6x300mm•AXK8• 8x6x60mm•AXK85• 8x5x60mm (for use with European manufactured hubs)•AXK8P• 8x3x50mm (pegged)•AXK50P• 8x3x50mm (pegged, for use with 50mm axle)
Also available as a ‘carded version’ – refer to price list for correct part number
Smart Axle Tuner Set•AXT• 40mm
The innovative way to ‘tune’ your rear axle. Simply insert the Smart Axle Tuners inside the axle to stiffen it in the middle, or at either or boths ends.
Axle Bearing Flange – Purple
•AXQ40P• 40mm purple, to suit AXB40 or AXB50C
Unique one-piece slotted design allows for handling adjustment by adjusting bolt tension. Machined
from soild billet alloy – includes extra 8mm hole for seat stay
12
*Guide only for suitable kart models, driver weights, class etc.**These axles are tested and recommended for use with Arrow karts indicated, but are also suitable for use with other kart brands.
Diameter Kart Length Approx. Keysteel Wall Comments,Product Code (mm) Model* Description (mm) Weight (g) part no. Thickness Lined Rating etc.
25mm AXLES:
•AX25S• 25 Midget Solid 1000 3795 •AXK• – No – Rooky
30mm AXLES:
•AX30H• 30 AX5** Hollow 1050 3410 •AXK• 5.5 No –
•AX30HJ• 30 Junior Hollow 1050 3410 •AXK• 5.5 No –
•AX30HL• 30 AX6** Hollow, lined 1050 3410 •AXK• 5.5 Yes –
•AX30HR• 30 Midget Hollow 1000 3240 •AXK• 5.5 No – Rooky
•AX30S• 30 All Solid 1050 5755 •AXK• – No –
•AX30TW• 30 AX6** Thin wall 1050 2320 •AXK• 3.5 No –
•AX30TWJU• 30 Junior Thin wall, lined 1050 2320 •AXK• 3.5 Yes –
•AX30TWL• 30 AX6** Thin wall, lined 1050 2320 •AXK• 3.5 Yes –
•AX30TWR• 30 Midget Thin wall 1000 2200 •AXK• 3.5 No – Rooky
40mm AXLES:
•AX40DH• 40 All Hard, 8mm key 1050 2795 •AXK8• 3 Yes Hard
•AX40DHI• 40 All Hard, 8mm key 1050 2795 •AXK8• 3 Yes To suit inboard chassis
•AX40DM1• 40 All Medium, 8mm key 1050 2795 •AXK8• 3 Yes Medium
•AX40DM1I• 40 All Medium, 8mm key 1050 2795 •AXK8• 3 Yes To suit inboard chassis
•AX40DM2• 40 All Medium 2, 8mm key 1050 2795 •AXK8• 3 Yes Med/Soft
•AX40DM2I• 40 All Medium 2, 8mm key 1050 2795 •AXK8• 3 Yes To suit inboard chassis
•AX40DS• 40 All Soft, 8mm key 1050 2795 •AXK8• 3 Yes Soft
•AX40DSI• 40 All Soft, 8mm key 1050 2795 •AXK8• 3 Yes To suit inboard chassis
•AX40HCSX• 40 All Extra soft 1050 1920 •AXK8P• 2 No Extra soft (pegged)
50mm AXLES:
•AX50M• 50 All Medium, 8mm key 1030 2548 •AXK850P• 2 No To suit inboard & outboard chassis
•AX50MS• 50 All Medium, 8mm key 1000 2475 •AXK850P• 2 No To suit inboard & outboard chassis
•AX50H• 50 All Hard, 8mm key 1030 2548 •AXK850P• 2 No To suit inboard & outboard chassis
•AX50XXXS• 50 All Ultra soft, 8mm key 1030 2548 •AXK850P• 2 No To suit inboard & outboard chassis
At DPE we pride ourselves with the high level of customer service
that we provide to our customers anywhere in the world.
To enable us to despatch your order quickly and efficiently,
DPE is equipped with the most sophisticated modern electronic
despatch system available today, guaranteeing your orders are
delivered to your doorstep without delay.
Our large warehouse facility also allows us to carry an extensive
range and quantity of karting components, meaning we can
fulfil any size order the first time.
If you needed your kart parts yesterday, then order
them through DPE today!
leaders inservice…
Brake Master Cylinder •BDHM02• Purple anodised billet alloy
Hydraulic Brake Lines & Fittings8mm Braided Lines (complete with fittings):•BDHF44• 760mm (CIK LH) •BDHF45• 805mm (CIK RH) •BDHF46• 385mm (125 M/cyl. – ‘T’ fitting) •BDHF47• 870mm (125 LHF) •BDHF48• 865mm (125 RHF) •BDHF49• 680mm (125/80 LHR) •BDHF50• 720mm (125/80 RHR)•BDHF32• 3-way ‘T’ fitting •BDHF40C• Line clips (red) •BDHF40CT• Clip to secure ‘T’ fitting (red)
Standard 6mm Plastic Line: •BDHL1• Black •BDHL1R• Red
System Product Code •BDH07125• •BDH0780• •BDH06• •BDH07• •BDH05•
Master Cylinder •See above• •BDHM02• •BDHM02• •BDHM02• •BDHM01•
Rear Caliper 4-spot •BDHC03• •BDHC03• – •BDHC01• –
Rear Caliper 2-spot – – •BDHC02• – •BDHC02•
Front Caliper (L/R) •BDHC03L/BDHC03R• – – – –
Hydraulic Brake Systems
125cc Brake Master Cylinder
•BDHMB01• Bias adjustment system•BDHM03L• Left side assembly
•BDHM03R• Right side assembly
2935 32 26
24
30 25 31
27
28
27
34
33
27 27
34
33
53
53
44
45
46
44
46
19
54 45
47
2948
4829
49
50
35 32 26
24
30 25 31
28
15
Produced in conjunction with
a specialist Australian brake
manufacturer, DPE are proud of
our ground-breaking systems.
The twin line design gives
maximum consistency and control
under all conditions, while the
solid billet construction ensures
perfectly even pad application and
wear, resulting in longer pad life.
DPE’s braking systems
will stop the opposition
in their tracks!
4-Spot Hydraulic Brake Caliper •BDHC03• Purple anodised billet alloy
Alloy 2-Spot Hydraulic Brake Caliper •BDHC02• Purple anodised billet alloy
125cc Hydraulic Front Brake Caliper
•BDHC03L• Left
•BDHC03R• Right
set(2 pieces)
set(4 off)
1
3
6 7912
13
14
14
1719
23
20
43
12
12 6 9 7
697
13
17
17
17
17
17
17
19
3
19
3 3
3
19
23set (2 pieces)
23set (2 pieces)
1set (4 pieces)
1set (4 pieces)
Brake Pads•BHL14• Soft (2 pieces)
Shims•BHS1• 1.6mm
Lining Springs•BHL21•
Barrel fittings•BHC3•
Piston•BHP1•
Lining Spacers
•BHL22•
Lining Bolts•BHL20• (bolt only)
Lever Arm Adjusting Screw•BHL25•
KSI Mechanical Brake Caliper•BHC1• no cable
•BHC2• includes cable & barrel fittings
Arrow Mechanical Brake Caliper•BDMC01• Includes clevis’ and balance wheel
Lever Arm•BHLA•
45
10
21
37
3839
40
41
42
43
set(2 pieces)
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
17
•BGT3300K• To suit Tony Kart built after 1998
•BGTH100K• To suit Tony Kart & Haase built before 1998
•BGP2600K• To suit PCR
•BGS• To suit Swiss Hutless
•BGA1100K• To suit All Kart, Azzurro, DAP
•BGB800K• To suit Birel
KSI pad sets to suit Tony Kart, Haase…
•BG03K•Hard (gray colour)
•BG02K•Soft (bronze colour)
•BG01K• To suit KSI hydraulic caliper(727AP)
•BGTI• To suit Tibi Kart
Brake Pads to suit European kartsDPE have a huge range of brake pads to suit most European karts & models. Consult the photos & dimensional drawings below for reference to particular applications. Refer to DPE Price List for full details and listing of parts available.
•BDILS• Dino Brake Pad Set (2 pieces)•BKL2• Kart Components (KP) Brake Pad Set (2 pieces)
With so many quality products available
through DPE, we believe items need
to look as good as they are.
Much of the Kartech range of products is
available in our attractive packaging (see
‘carded’ part numbers in this Kartalogue or
your DPE Price List) – from grub screws
right through to sets of brake pads!
This allows products to not only be
protected from damage, but also
displayed attractively in any karting
retail outlet. All products
are clearly labelled with
product description
and part numbers for
easy identifi cation and
reordering.
Kartech products are
not only the highest
quality, but also
safe, convenient and
attractive to display!
Quality Products…Convenient
Packaging…Attractive
Display!
19
•BNC860•
leng
th
diam
eter
desc
riptio
n*
*Description codes as follows:H – hex BH – button headC – countersunk W – washerN – standard nut L – nyloc nut
Guide for selecting correct size of bolts, nuts & washers:
19
Nyloc nutsSample code:•BNL6• 6mm
Standard NutsSample code:•BNN6• 6mm Capscrews – button head
Sample code: •BNBH530• 5x30mm
Hex Bolts – shortSample code: •BNH820• 8x20mm
WashersSample code:•BNW6• 6mm
DPE stocks an immense range of bolts,
nuts and washers for every possible karting
application. From capscrews to bolts, flat or
countersunk washers to nyloc nuts, DPE offers
a wide choice in size, and specifications.
Hex Bolts – longSample code:
•BNH1290• 12x90mm
Capscrews – countersunkSample code: •BNC850• 8x50mm
CapscrewsSample code: •BN635• 6x35mm
Concult DPE Price List for full details of sizes and specifications available
Cast IronBrake Disc•BRD1006•
100mm ID, 205mm OD, 5.5mm width
•BRD100•100mm ID, 215mm OD,
5mm width
Steel RookieBrake Disc•BRDRO•100mm ID, 195mm OD,5.5mm width
Hire Kart Brake Disc•BRDHK•
116mm ID, 218mm OD,5mm width
•BRDHK100•100mm ID, 213mm OD,
5mm width
Brake Hubs – Alloy/Silver•BRDH25• (25mm)•BRDH30• (30mm)•BRDH35• (35mm)•BRDH40• (40mm)
Also available: •BRDH306• & •BRDH356• (fully machined both sides)
Radial Vented Brake Disc•BRD100R•100mm ID, 215mm OD,12mm width
Radial Vented Front Brake Disc
•BRDFL• left•BRDFR• right
100mm ID, 160mm OD,10mm width
NOTE: P.C.D. of all discs and hubs is 114mm, except BRDHK which is 135mm
Brake Hubs – Billet Alloy•BRDH40D• gold 40mm
•BRDH40DP• purple 40mm 6mm & 8mm keyways
•BRDH50• purple 50mm 8mm keyway
‘Radically Cool’Brake Disc•BRD18•100mm ID, 205mm OD18mm width
Radially Vented/DrilledBrake Disc
•BRD100R6•100mm ID, 205mm OD,
12.5mm width
•BRD12•100mm ID, 210mm OD,
12.5mm width
21
Is there no stopping DPE’s innovation?
As well as manufacturing a range of discs and hubs to suit most
karts and applications, we also produce our own legendary radial vented ‘Radically Cool’ Brake Disc •BRD18• (above). Its unique design and construction ensures you’ll never have to worry about brake fade again – yet it weighs less than 1.0kg. Match it to our striking Billet Alloy Brake Disc Hubs and you’ll stop the opposition in their tracks every time!
22
•CABMS• Short Mechanical Brake Cable, 395mm to suit caliper •BDMC01•
Product INNER OUTER Code diameter length length End Fitting
•CABH• 2.5mm 2000mm 1680mm 8mm ball
•CABML• 2.5mm 1140mm – M5 x 20mm
•CABMS• 2.5mm 395mm – M5 x 20mm (2)
•CABX8• 2.5mm 700mm – Clevis
•CAT1• 1.1mm 1400mm 1100mm 2.9 x 5mm
•CAT1K• KSI 1.1mm 1400mm 1100mm 2.9 x 5mm
•CAT1T• 1.3mm 1450mm 1100mm 2.9 x 5mmTeflon inner
•CAT1L• 1.1mm 1650mm 1370mm 2.9 x 5mm
•CAT1R• 1.1mm 1400mm 1100mm 2.9 x 5mm
•CAT2• 2.0mm 2170mm 1830mm 6.5mm ball
•CABX8•Brake Cable, including clevis
•CABML• Long Mechanical Brake Cable, 1140mm to suit caliper •BDMC01•
•CAT1R• redThrottle Cable,
universal
•CAT1• black Throttle Cable, universal
Also available:•CAT1L• blackExtra long Throttle Cable, universal
•CABMO• Mechanical Cable outer only, length 400mm
Whether you’re stopping or
going, often the only thing
linking your foot to the throttle
or brakes is a thin strand of cable, so
you want to make sure it’s the best!
DPE has brake and throttle cables
available for every level of karting, along
with all the required hardware to fit and
use them. All cables are manufactured
from high quality steel strand wire,
for maximum strength, reliability and
durability, and have only the best fittings.
Cable Compression Springs – throttle•CAT5•
Cable Brake U-Clamps•CAB2• 4mm
•CAT2•Throttle Cable for hire karts, extra heavy duty
•CABH• Brake Cable for •BHC1• (Hire Kart Mechanical Caliper)
Tillotson Throttle Bracket•CAT9• inc. Cable adjuster & screws
•CAT3• Throttle 4mm
•CAB1• 6mmincludes 6mm standard nut
Cable Adjusters
Cable Clamp – double
•CAT4•
Includes 2 hex screws
•CAT6 Battery• (not shown)8 x 450mm, for Rotax 125 Max battery straps
•CAT7RED• 4.8 x 200mm
•CAT8• 4.8 x 280mm
•CAT7• 4.8 x 190mm
•CAT6• 2.5 x 200mm
Cable Ties
24
Rotax 125 Max Carburettor•ERWCA10•
21
41
42
4344
45
46
22
23
31
25
27
30
34
36
37
3823B23A
3940
13
19
20 Kit (3 pieces)
29
28
33
32
2624
35
The Rotax 125 Max is now a
worldwide phenomenon. The
engine and all its components are
designed for ease of use, and this
includes its Dellorto carburettor.
The slide carburettor is easy to
adjust and set up, allowing every
driver to concentrate on racing
whilst on the track.
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
DPE are authorised Australian
distributors for both Walbro
and Tillotson – the two most
commonly used carburettors in
karting worldwide This ensures we always have the parts
you want in stock and at competitive prices.
Walbro Unleaded Diaphragm Kit
•CWDK•
Walbro Piston Port Diaphragm Kit
•CWDKPP•
Walbro Leaded Diaphragm Kit•CWDKI•
Walbro Repair Kit•CWDRK•
Walbro Carburettor•CW01•
Flexi jet•CWFJ•
Extended low jet •CWFE•
2535
52
505
1720
1556
5725
59/6014
83
12
40
37
22/23
27325
230
25 1711
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
Joining Links•CH35•35 pitch link kit
•CH40•40 pitch link kit
•CH40M05• 40 pitch,5m roll (not pictured)
Clip type bracket•CHG2•
Clips for chain guard bracket•CHG3•
Yamaha Engine Chain Guard•CHGYP• Plastic
Guards fit both Yamaha KT100S & KT100J engines
26
Your kart chain is the only thing between the engine and the wheels, so don’t make the wrong choice! EK, DID and
Rolon combine the very best materials and workmanship to produce the best racing kart chains available.
Don’t fit an inadequate chain to your expensive kart… Choose EK, DID or Rolon!
NOTE: Consult Owners Manual for proper chain specification and installation. Improper selection and/or use may cause kart damage or personal injury.
•CH40J• 40 pitch,0.83m length & 2 joiners
•CH35J• 35 pitch,1.0m length & 2 joiners
Kartech Rental Kart Chain
Chain Guard•CHGSFK• (red)
Strip & fi nger guard
Fully enclosed Chain Guard•CHGFE•
The ultimate chain guard! Unique design keeps kart cleaner, quieter and provides extra safety protection. Includes universal mounting brackets.
Also available: •CHGFEB• Bare chainguard without brackets.
EK HR Silver Racing Kart Chain
Ideal for use with either Yamaha KT100S or KT100J engines. 219 pitch.Available in lengths from 96L–110L.
•CHE096• 96L •CHE098• 98L•CHE100• 100L •CHE102• 102L•CHE104• 104L •CHE106• 106L•CHE108• 108L •CHE110• 110L
Chain Guard•CHGPS• (black) •CHGPSR• (red)
Plastic strip type
EK HRD Gold Racing Kart ChainOffers the ultimate in long life chain for the Yamaha perfectionist or higher performance engines. 219 pitch. Available in lengths from 100L–114L.
•CHED100• 100L •CHED102• 102L •CHED104• 104L •CHED106• 106L•CHED108• 108L •CHED110• 110L•CHED114• 114L
•CHGFE6•includes mounting
brackets for AX6 karts
DID Racing Kart Chains
‘O-Ring’ Chain – 219 pitchHighest quality O-Ring chain for the ultimate
in performance and reliability.Available in lengths from 100L–114L.
•CHDO100• 100L •CHDO102• 102L •CHDO104• 104L •CHDO106• 106L
•CHDO108• 108L •CHDO110• 110L •CHDO112• 112L •CHDO114• 114L
Gold/Gold ‘Premium’ Chain – 219 pitchHigh quality premium specifi cation chain suitbale for most
racing kart applications. Available in lengths from 94L–110L.
•CHD094• 94L •CHD096• 96L •CHD098• 98L •CHD100• 100L •CHD102• 102L •CHD104• 104L •CHD106• 106L •CHD108• 108L •CHD110• 110L
Gold/Gold ‘High Spec’ Chain – 219 pitchThe high spec racing kart chain for high performance engines. Available in lengths from 96L–112L.
•CHDHA096• 96L •CHDHA098• 98L •CHDHA100• 100L •CHDHA102• 102L •CHDHA104• 104L •CHDHA106• 106L •CHDHA108• 108L •CHDHA110• 110L •CHDHA112• 112L
Rolon Racing Kart Chain – 219 pitch
Suitable for the Yamaha KT100J. Available in lengths from 100L–112L.
•CHR102• 102L •CHR104• 104L•CHR106• 106L •CHR108• 108L
Since 1957 Max-Torque
clutches have been
designed, engineered and
manufactured to deliver
exceptional performance.
They are unique and original in
design and engineering. Others
have copied, but none can
duplicate the performance and
reliability engineered into every
Max-Torque clutch.
•CL26•5/8 bore, 11T
35 pitch
•CL15•3/4 bore, 12T
35 pitch
•CL30•Woodruff Key
•CL25•3/4 bore, 10T
40 pitch
29
There is only one name which is synonymous worldwide
with the best karting apparel and products – MIR. MIR’s
range of Race Suits, Boots, Gloves and other racing apparel
is unsurpassed in both style and quality. MIR’s complete
range of colours and sizes ensures that every driver will not
only be comfortable, but look great too.
The MIR range also includes Wet Suits, Caps, Sports Bags,
Helmet Bags and other unique products such as Engine
Bags to protect your precious items.
For full details on the latest
range of MIR products
available, refer to DPE’s
MIR Racewear Brochure,
Price List or the DPE web
site at www.dpeng.com.au
For the latest in safety and comfort
for racewear, DPE produce and
supply the products for you. Almost
all our Kartech Racing Products are
designed and produced exclusively
by DPE using our many years of kart
racing knowledge and experience
so you can race knowing you are
racing with the very best…
Driving Gloves
You’ll easily come to grips with winning in our new Driving Gloves. Made from super soft and
comfortable chamois and synthetic leather, these extra long gloves are sure to help you guide your
kart to victory. Available in black, blue and red, Sizes XXS–XL. Product Codes •DGL__•
Jacket
Stylish weatherproof jacket
to keep you warm and dry in even
the worst weather conditions. Kartech
embroidery front and back. Black
only. Sizes S–XXXL. Product Codes
•DAKBK__•
31
Neck BraceCotton covered foam Neck Brace offers helmet support, protecting
against neck injuries. Especially recommended for younger drivers.
Black only. Available in sizes Small, Medium &
Large. Product Codes •DN__•
Driving Vest
Kartech’s Driving Vest is longer than most and protects a larger area of the ribs and torso from bruising, while inserts in each side offer extra protection and support. The back of the vest is uniquely designed with two joins instead of the usual one, providing superior spinal protection. Blue only. Available in sizes Rookie – Large. Product Codes •DV__•
ArrowSports Bag
•DAASB•Size: 80x28x38cm
32
Bridgestone Badges•DBRBL• 285 x 90mm
•DBRBS• 125 x 45mm
•DBRSTV• Bridgestone Visor sticker
•DBRST4• Bridgestone Vinyl sticker
185 x 30mmBridgestone vinyl stickers•DBRST3• 240 x 40mm
Woven Badges
Stickers
•DA23•
•DA25•
•DA26•
•DA24•
•DA27•
•DA15K•
•DA15KW•
•DA15KS•
•DA21•
•DA22•
DPE vinyl stickers•KST43• 200x60mm•KST44• 80x24mm•KST45• 58x35mm
Formula Rotax vinyl stickers•DRSFR01• 500x250mm•DRSFR02• 240x120mm•DRSFR03• 120x50mm•DRSFR04• 55x25mm
Rotax vinyl stickers•DRSRKE02• 240x100mm•DRSRKE03• 116x50mm•DRSRKE04• 56x25mm
•DRSRMC01• 310x110mm (Max Challenge)
Kartech Badge – large•DBKAL• 280x110mm
DPE Badge •DBDPE•
100x60mm
Kartech Badge •DA15B• 50x22mm
•DBRST2• Bridgestone Vinyl sticker 490 x 90mm
•DBRST1• Bridgestone Vinyl sticker 990 x 160mm
Rotax’s winning ways are not confined to
the racetrack. Their new range of apparel
is as eye catching as their race engines are
competitive. Included in the range are shirts,
windcheaters, caps and jackets. All items are
manufactured from top quality materials and
made to last many years.
Rotax Dress Shirt•DRS1• Large•DRS2• X Large
Rotax Cap•DRC•
Rotax Jacket•DRJ1• Large•DRJ2• X Large
Rotax Windcheater•DRW1• Large•DRW2• X Large
For the latest
range of Rotax
Apparel, consult the
DPE Price List or
www.dpeng.com.au
35
Today’s kart racers demand products which are practical, easy to use, aesthetically pleasing and of the
highest possible quality, while still being good value for money. To fulfi l all these requirements is a
challenging task, to say the least. To achieve this we embrace the use of the latest and highest level of
technology available. Our machining and fabrication departments use the latest, highly sophisticated
CNC lathes, machining centres and robotic welders. This allows us to manufacture and supply our
range of exciting, innovative, high quality products at competitive prices.
DPE products – The successful combination of specialist design and high technology.
Rotax is arguably the most recognised name in kart engines. With their ground breaking FR125 Max and now the new DD2 Max engines, they continue to set new trends the Karting world over. Legendary for their power and reliability, Rotax is the first choice for the driver who wants the ultimate in performance.
The Yamaha name is known worldwide for their engines and engineering, and their kart racing engines are used in many countries around the world. In Australia, the KT100S and KT100J are the basis of club and entry level kart racing respectively, providing a very effective mix of power and reliability.
For the latest information regarding Rotax Reed, Rotary and Piston Port engines, please visit the DPE web site at www.dpeng.com.au
37
The biggest ‘little thing’ in karting is the Comer S-80 engine. The compact 2-stroke features the convenience and safety of a centrifugal clutch and pull-start, making it the ideal engine for ‘Junior’ and ‘sub-Junior’ karting, or even for the young recreational karter. All this from one of the most successful names in all levels of world karting – Comer.
The sensation in karting worldwide
is the incredible watercooled Rotax FR125
Max engine. Designed for both the racing
and recreational markets, the engine
combines the best of both worlds. Engineered
and manufactured by one of the world’s
leading racing kart engine producers it has
a true race pedigree, producing over 28
horsepower, while the unique simplicity
and self-starter provides the
ultimate in hassle-free karting.
It can easily be mounted
to almost any kart chassis
with a simple kit available,
giving anyone the
chance to experience
the renowned power
and reliability of
Rotax.
Bore: 54.0mm
Stroke: 54.5mm
Weight: 12kg (as shown)
28 horsepower @ 11,500rpm
Max Fitting Kits Tools
Battery Box Rubber •ERWBBR•
Battery Cable Ties (8 x 550mm)•CAT6BATTERY•
Battery Box Set
•ERWBB•Includes Battery Box, Battery Box Rubber & Cable Ties (2)
Battery Box Clamps (2 required)
•ERWBBC30• Suits 30/32mm chassis’
Exhaust Bracket Spigot/Clamp
•EXBRWC•
•ERWXMPN8• Suits Arrow AX8 30/32mm Karts
Kit includes: •KES6• •KES6U• •EMSTR• Engine Mount
•ERWXMP• Suits Arrow AX6 30/32mm Karts
Kit includes: •KSP6L• •KSP6R• •ERWIP• •KES6• •KES6U• •EMSTR• Engine Mount4 x •EXS90• Exhaust Springs
•ERWXMPN• As above, except no pod bars
•ERWXMPU• Universal kit for 30/32mm karts. Kit includes:•ERWIP• •KES6• •KES6U• •EXBRWC•
•ERWT01•
Tool for locking crankshaft in place
•ERWT02•
Tool for fitting sprocket to clutch drum
•ERWT03C•
Clutch puller protection for thread of crank
•ERWT04•
Tool for inserting crank seals
•ERWT05•
Tool for inserting water pump seals
•ERWT06•
Tool for inserting electric starter needle bush
•ERWT07•
Tool for inserting 11T sprocket bush
•T41•
Tool for fitting 15mm circlips
Exhaust Support Bracket Set (inc. 2 x 90mm exhaust springs, 2 x90mm quick release exhaust springs)
•KES6•
Exhaust Support ‘U’ Bracket (includes 1 x 90mm exhaust spring
•KES6U•
Battery Charger
•ERWBC•
Battery Charger*
•ERWBCG•Adapter*
•ERWBCGA•
Battery Cradle (steel)*
•ERWB01•
Battery Cover*
•ERWB02•
Battery Cradle Clamp (steel clamp)*
•ERWB03S•
Battery Cradle Clamp (complete)*
•ERWB03•
*indicates parts suitable only for Engine numbers 769965 and later. Clamps suit 32mm chassis.
39
Radiator Support (complete)
•ERWW01C•
Sidepod Bars
•KSP6L• Left (AX6, 19mm)
•KSP6R• Right (AX6, 19mm)
Ignition Switch Panel•ERWIP•
18
17
74
75
76
133
134
135
135
136
136
136
136
89
90
91
92
93
126
1278
51
52
53
72
73
78
79
80
81
95
97
98
99
100
104
105
106
107
108109110
111
112 113
114
115
118
143
14
15
129
•ERWW02L•
Thread Sealant for 90˚ socket
•ERWW10•Coolant/Corrosion Inhibitor
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
1
2
3
3
4
5
6
7
56
57
5859
6061
62
63
64
65
66
141
142
140
12
47
48
49
50
50
77116
117
119
120
121
122 123
124 125
128 129
130
131
138
9
9
10
11
54
5455
55
68
69
70
71
67
82
83
84
85
86
87
88
94
96
9
11
10
101
102
103
132
128
137
1399
•ERWM•Owners Manual
Australian Edition
41
The Comer S-80 is highly successful
in Cadet and sub-Junior classes both
in Australia and around the world.
The engine provides the ultimate in
ease of use with its pull-starter and
centrifugal clutch, along with great
performance and reliability. Simply
bolt it onto the kart and go racing!
Comer S-80 EngineBore: 52mm Stroke: 38mmHorsepower: 6hpWeight: 7kg
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
43
1S2
S23
4
5
6
7
8
9
10
S7
11
12
S18
13
14
15(gasket)
16
17
18
19
20
S28
22
S30
S32
23
S34
24S36
25
26
27
27
S40
28
S41
S42
29
‘S’ prefix denotes interchangeable part. Refer to KT100SD section for product code.
prefix and red part number indicates Kartech and/or KSI product/s or options available, offering performance, price, quality, size and/or thickness advantage.
Refer to pages 48-50 for further details.
S7
K
K
K
K
14K
K
KK
K
K
KK
K
K
KK
K
K
K
K
K
The KT100J is an ultra reliable
engine with low running costs,
making it extremely popular as
an ‘entry level’ engine for those
entering the sport, or indeed for
anyone racing on a tight budget.
Used in Midgets, Rookies,
Juniors and National Class
racing in Australia.
Yamaha KT100J EngineBore: 50.0mm Stroke: 50.0mmHorsepower: 9 Weight: 10kg (inc. exhaust header)
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
45
12
2
3
4
5
6
7
7
89
9
10
11
1213
14
15
16 (set of 6)
17
18
19
20
2121
22
23
24
26
2829
30
30
31
32
33
35
37
36
38
39
39
39
41
41
42
27
25
prefix and red part number indicates
Kartech and/or KSI product/s or options
available, offering performance, price, quality, size and/or
thickness advantage.
Refer to pages 48-50 for further details.
K
K
34K
K
K
K
K
KK
K
K
K
KK
K
K
K
K
K
K
K
K
K
K
K
K K
40K
Various forms of the KT100S engine
are used in many countries, making it
one of the most popular kart racing
engines in the world! Its popularity
is due to its perfect mix of low cost,
reliability, performance and long life.
DPE’s experience with this engine is
vast, having been involved since its
introduction into Australian karting
more than 2o years ago.
Yamaha KT100SD EngineBore: 52.0mm Stroke: 46.0mm
Horsepower: 15 Weight: 11kg (inc. exhaust header)
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
Although only recently gaining popularity in some countries, the Yamaha KT100S and KT100J engines have
been a major part of the Australian karting scene for over 20 years. DPE’s vast competition experience
and technical knowledge have resulted in a wide range of race proven products, providing the karter
with the very best in quality and performance.
Kartech engine parts are a wide range of products, combining those that are designed and
manufactured exclusively for DPE, others that we manufacture ourselves, together with the highest
quality parts sourced from all around the world, including genuine Yamaha products.
Whenever you think Yamaha engines, think Kartech engine parts first…
1
6
7
7
9
9
16 (set of 6)
18
19
20
2121
23
28
30
30
32
35
37
39
39
39
25
41
41
34
40
Piston Rings
•ESRK00• •ESRK9053• Kartech
•ESRT05• •ESRT9535• KSI(Note that numbers indicate size)
Teflon coated for ease of running in and improved sealing. Manufactured to fine
tolerance, so end gaps are correct. Available in a wide range of sizes.
Kartech: 52.00-53.00mmKSI: 52.05-53.50mm
Conrods•ESCOJ• Genuine Yamaha,
crack tested (light ‘J’ rod)•EJCOT• Genuine Yamaha, crack tested, hardness tested
& checked for straightness (‘J’ rod)•ESCO• Mid weight•ESCOK• KSI
Pistons
•ESPK___• KSI•ESP___• Yamaha
(Note that numbers indicate size)
A choice of brands offering top quality, along with a comprehensive range of
sizes.KSI ‘Super Blue’: 52.02 -53.00mm
Standard: 53.10 - 53.50mm
37
35
6
AKA Cylinder Sealing Nut•ESNCA• AKA legally approved sealing nut
34
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
47
Little End Cages•ESLE03• Thompson brand
17mm wide, use with little end spacers/Yamaha KT100J engines (6 per roll)
•ESLE03W• Thompson brand 19mm wide, use with located big end (5 per roll)
•ESLE03WK• KSI brand 19mm wide (5 per roll)
Big End Cages•ESBEK• Thompson 17mm wide, use with little end spacers (6 per roll)•ESBEKN• Thompson 14mm wide, use with big end spacers (7 per roll)(•ESBEKNK• KSI 14mm wide)
Fin Damper Set•ESCYD• includes 4 short (head) & 2 long (cylinder)
CirclipsEuropean made, 14 x 1.0mm
•ESCPE• earless•ESCP• with ears
Cylinder Head Nut Set•ESNH6• set including 6 nuts & washers
•ESNH• nut only
Cylinder & Head Studs•ESS2• Cylinder/Head Stud•ESS3S• Stepped stud to repair stripped threads
Exhaust Studs•ESS4• Exhaust Stud•ESS4S• Stepped stud to repair stripped threads
Carburettor Gaskets
•ESGCA1• Carburettor gasket
Atom Ignition Module•ESIM2•
Ignition module programmed to suit KT100S
engine
Ignition Module Holder•ESIMH• Ignition holder
for genuine CDI module – safeguards against damage and
loss of expensive CDIs
Main Bearings•ESM6304/9• Superior bearings containing nine balls which contributes to lower inertia, meaning faster acceleration/deceleration, higher RPM limit and increased load limit. The ultimate main bearing!
Exhaust Headers•ESEHK• 200mm length•ESEHK2• 165mm lengthLarge diameter, mandrel formed for improved flow and performance
Powermac Exhaust Headers•ESEHKP• 165mm length•ESEHKPL• 200mm lengthStainless steel, expanded to maximum diameter (36.0mm)
Crankpin Plugs•ESCR03•
Crankshaft Seals•ESSI• Genuine Yamaha, unidirectional seal for both drive and ignition side
•ESSIT• Teflon Coated Seals
Head Gaskets4 thicknesses for quick and easy adjustment of cylinder head
•ESGH12• 1.2mm •ESGH9• 0.9mm•ESGH75• 0.75mm •ESGH6• 0.5mm
Crankshaft Nuts•ESNCD• to suit early model engines with 10mm diameter crank, 10-14mm tapered shaft
•ERNCD• to suit late model engines with 12mm diameter crank, 12-15mm tapered shaft
Cylinder Base Gaskets4 sizes for quick and easy adjustment of the cylinder/head position
•ESGB075• 0.075mm •ESGB1• 0.1mm•ESGB2• 0.2mm •ESGB4• 0.4mm
28
1
19
32
18
30
25
9
21
40
39
16
7
41
•ESGC1• Carburettor gasket
23
20
34
13
S7
S18
13
14
16
17
S28
22
S30
S32
S34
24
25
S40
28
S41
S7
14
Piston Rings•EJRK00• •EJRK9051• Kartech Teflon Coated•EJRKSI00• •EJRKSI953• KSI(Note that numbers indicate size)
Kartech rings are manufactured to fine tolerance, so end gaps are correct. Available in a wide range of sizes from 50.00-51.00.
Genuine Yamaha Conrods•ESCOJ• Crack tested
•EJCOT• Crack tested, hardness tested & checked for straightness
Pistons
•EJPK__• KSI•EJP__• Yamaha
(Note that numbers indicate size)
Popular brands offering top quality, along with a
comprehensive range of sizes from 49.98-50.65 (Yamaha),
50.05-51.00 (KSI).
Carburettor Gaskets•EJGC1•
Crankshaft Seals•EJSD• Genuine drive side seal (large)•EJSDT• Drive side teflon coated•ESSI• Ignition side•ESSIT• Ignition side teflon coated
Head Gasketsfor quick and easy adjustments of the cylinder head position
•EJGH• 0.3mm•EJGH1• 0.1mm•EJGH2• 0.2mm
Exhaust Gaskets•EJGE•
Reuseable copper type
Big End CagesThompson brand – the brand you
can trust
•EJBEK•7 per roll
Main Bearings•ESM6304/9•Superior bearings containing nine balls which contributes to lower inertia, meaning faster acceleration/deceleration, higher RPM limit and increased load limit. The ultimate main bearing!
Cylinder Base Gaskets5 sizes for quick and easy adjustments of the cylinder/head position
•EJGB075• 0.075mm •EJGB1• 0.1mm•EJGB2• 0.2mm •EJGB4• 0.4mm•EJGB75• 0.75mm
Kartech’s range of engine parts includes a wide range for the KT100J engine, as well as many which are interchangeable with the KT100S (see diagram below). As with all Kartech parts, they offer advantages over genuine and other parts in either quality, performance, size range, certification and/or price.
So if you’re looking for KT100J parts, look to Kartech first!
S30
3
24
25
17
13
14
16
28
1
•EJM6204•High speed
precision bearing
22
Numbered parts (in exploded diagrams only) are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
‘S’ prefix denotes interchangeable part. Refer to KT100S section on previous pages.
DPE also manufactures its own superior quality
engine mounts, including the unique ‘anti-vibration’
version. Its unique inserts extend chassis life, provide
greater engine performance and ensure driver
comfort by reducing vibration passing from the
engine directly through the chassis.
All DPE engine mounts have steel inserts so you’ll
never strip another clamp bolt thread.
Engine Mount – Anti vibration
•EMAV• (undrilled)
•EMAVC• (pre-drilled to suit Comer S-80)
Includes clamps, bolts & inserts. Fits 28/28.6mm
chassis, 90/92mm rail centres
Engine Mount Inserts•EMAV3•
Engine Adjuster Bolt•EM03• (Bolt - M10 x 60mm) •EM05• (Insulator - black) •EM05R• (Insulator - red)
Engine Mount – Rotax 125 Max
•EMSTR• (pre-drilled) Includes clamps & bolts. Fits 28/28.6/30mm chassis, 90/92mm rail centres
•EMSTR32• (pre-drilled) Includes clamps & bolts. Fits 32/32mm chassis, 90/92mm rail centres
Engine Mount – UndrilledTo suit 28/28.6/30mm chassis, 90/92mm rail centres:•EMST• Standard (complete)•EMSTI• Inboard (complete)
To suit 32mm chassis:•EM32• (complete)
•EMAV2• (clamp only)
49
Clamps:•EMST2I• 28/28.6/30mm inboard•EMST2• 28/28.6/30mm standard•EM32C• 32mm standard
our online ho
www.dpeng
Check out the latest parts and
accessories available…
51
DPE’s web site has been designed to provide all the
latest news and information on the enormous range
of products we manufacture and distribute. The web
site is a great companion to the Kartalogue, being
constantly updated with new products and technical
information – you can even download a PDF version
of the Kartalogue!
As well as displaying our range of products, the site
also brings you everything from the latest technical
updates and setup information, to product news and
the latest Australian tracks fitted with Alfano timing
strips. Australians can even register their Rotax 125
Max engine online!
So visit the DPE web site at www.dpeng.com.au to
keep up with all the latest happenings...
Rotax 125 Max information and
technical sections, including
downloadable Technical Bulletin Archive!
Download the latest
technical and kart
setup information…
Find your nearest
retailer or distributor,
wherever you are in
the world!
me...
.com.au
Our range of exhaust pipes and associated components is second to none, and includes more fine examples of DPE’s innovation.
Replace exhaust flex with DPE’s Solid Exhaust Adapters. With Solid Exhaust Adapters, your exhaust length will remain constant, and adjustment of length is far quicker, easier and more accurate than with exhaust flex. DPE’s Solid Exhaust Adapters are expanded at one end for a neat fit into the muffler, and reduced at the other end for a neat fit into the header pipe. They also eliminate the chance of loss of power due to cracked or broken flex.
DPE’s Exhaust Flex Adjusters allow you to quickly and easily adjust the flex length in 3, 5 and 10mm increments. No more messing around cutting flex – simply slip one of these in and away you go.
Exhaust Flex Adjuster – Powermac•EXFP•
Large diameter: 50mm. Small diameter: 45mmLength: 80mm
Exhaust Bracket Extension•EXBE•Extends by 65mm
Exhaust Bracket•EXB1• (complete)
•EXBR• (exhaust bracket rubber)
•EXB1B• (bare bracket)
Silencer Support Exhaust Cradle•EXB1S• (complete)
•EXBR• (rubber)
•EXB1B• (bare)
•EXB1• (complete)
Exhaust Flex Adjusters45mm diameter to suit Yamaha engines:
•EXFYA05• 5mm •EXFYA10• 10mm•EXFYA• Set includes •EXFYA05• & •EXFYA10•
50mm diameter to suit European engines:•EXFLA03• 3mm •EXFLA05• 5mm •EXFLA10• 10mm
•EXFLA• Set includes •EXFLA03• & •EXFLA05•
Exhaust Header Ring•EXHR•
Fits into Yamaha size headers and stops damage and eventual failure of spring flange. Suits Kartech, Powermac & Yamaha headers. Essential for use with Solid Exhaust Adapters (not for use with flex).
Solid Exhaust Adapters(Yamaha)•EXA060• 60mm •EXA070• 70mm•EXA080• 80mm •EXA090• 90mm•EXA100• 100mm •EXA110• 110mm•EXA120• 120mm •EXA130• 130mm•EXA140• 140mm
Exhaust Adapter Spacer•EXAS•
Only for use with Solid Exhaust Adapters. Fits into header pipe, allowing fast 5mm
adjustment of exhaust length. Easily removed when not required.
53
90mm Quickchange
Exhaust Springs•EXS90Q•
•EXSK15•
•EXSKM•
Muffler tie wire & clamp•EXMW•
Muffler tie wire •EXMWB•
Exhaust Springs•EXS15• (15mm) •EXS25• (25mm)•EXS45• (45mm) •EXS90• (90mm)
•EXS90•
•EXS45•
•EXS25•
•EXS15•
Muffler – Powermac Magnum Phase 2•EXMPSM•The Magnum pipe has numerous National and State Titles to its credit. If you need an exhaust to put you ahead of the rest, choose the Powermac Magnum Phase 2
Muffler – Powermac “J”•EXMPAKA•The only legal pipe for National classes (Australia)
Muffler –Powermac Bullet•EXMPSMB•Bullet pipe gives strong low range, along with increased mid range power
55
Exhaust Spring Kits•EXSK15• (15mm)•EXSK25• (25mm) •EXSK45• (45mm)•EXSKM• (mixed)
For buying convenience, each kit contains 6 header and 2 •EXS90• springs.
•EXSKM• contains 3 each 15mm, 25mm, 45mm & 90mm springs.
•EXSK25•
•EXSK45•
Muffler – Powermac Eagle•EXMPE3•Powermac pipe designed for use with ARC engines
Mufflers – Rotax High Performance100cc high performance Rotax
pipes to suit Reed, Rotary and Piston Port engines.
Exhaust Endcap – Powermac•EXEP2•
Fits over existing endcap to reduce noise, without being detrimental to performance
Suits Powermac S4, S6 & Stealth pipes
Powermac Silencer KitsAKA approved silencer for use in Australian racing classes. Kit includes Silencer, pipe, clamps & fittings.
•EXMS•Suits Powermac Eagle, S4 & S10 (mufflers with endcap).
•EXMS2•Suits Powermac Magnum and RAAP
(mufflers without endcap).
For Rotax 125 Max exhausts & parts see pages 40-41
Neoprene fuel pick up line
•FTPL•Neoprene pick up line, 90mm
Fuel pick up weight•FTP•
•FTFO•
•FTFOR•
Fuel Tank – 6.5 litre•FT6•Complete including tank fi ttings
Fuel Tank – 5 litre•FT5C•Complete including tank fi ttings, strap & plates
•FTSP• (plates)
•FTS5• (strap)
Fuel Tank – 3 litre
•FT3C•
Complete including tank fi ttings
Overfl ow bottle•FTO1S• 250ml
DPE produces its own range of
fuel tanks and accessories
including the increasingly popular
‘quick release’ tanks, as required for
many international classes.
With our comprehensive range of fuel
tank sizes and styles, we can satisfy
every karter’s needs.
Fuel Tank Fitting– ‘O’ Ring type
•FTFO•complete fi tting
includes lock nut, washer & ‘O’ ring
•FTFOR•‘O’ ring only
Fuel Tank Caps•FTC• (black)
•FTCRED• (red)
Includes cap seal. Suits 5L (•FT5C•) &
6.5L (•FT6•) fuel tanks
57
Fuel Line Kit•FLK•includes 1m fuel line, fuel filter (•FLF•)& 4 clips (•FLCL•)
Fuel lineSought after “pink” type known for its long life and manufactured from high
quality crack resistant material.
•FLFW•
•FLF•
•FL1M• 1m length•FLI020• 20m roll •FLI100• 100m roll
Fuel Tank Fitting•FTF•includes fibre washers & nut
Fuel Filters•FLF• (standard)
•FLFW• (large volume)
•FLCL• (reuseable clip)
Fuel Tank- 9.0 litreQuick ReleaseComplete, including tank fittings, cap, mounting plate & bolt
•FT9K01• Bottom outlet
•FT9K03• Clamp
•FT9K04• Bolt
•FT9K05• Cap (bare)•FT9K050• O-ring•FT9K06• Cap & O-ring
•FT9K07• Hose clamp
•FT9K09• Double-
sided tape for affixing
strengthening plate
•FT9K02• Top outlet
For parts not labelled refer to relevant section within this guide, as indicated. See also Universal Kart Chassis Parts on following pages.
12 2
2A2A
3
•KFT27R••BNC620•
•KFT28R•
•HRS6•
65
64
73
33
34
35
35
36 21
37
38
39
40
•KSBC•
•KSB03•
•KTB4P•
66
67
69
•STWWP•
•KFT27R••KFT28R•
•KFT27R••KFT28R•
26 2729 30
25
26
28
82
25
26A29A 28A 28A71 7170 72
4242 43
7026A
45
45A
53
Wheels & Partspages 86-87
Numbered parts are for easy cross referencing with DPE Price List. Consult Price List for complete listing of product codes, sizes etc.
Brake Discs & Hubs
pages 20-21
Brake & Throttle Cables pages 22-23
Steering Wheelspages 74-75
Fuel Tanks & Accessories
pages 56-57
Noseconespage 64
Nassa Panelspage 65
For parts not labelled refer to relevant section within this guide, as indicated. See also Universal Kart Chassis Parts on following pages.
59
11A
1617
17A
18
19
20
20
80
•KG02•65 65
65
65A
32
32
32
32
41
74
47
48
48A
75
77
76
•KSE14L•
•KSE14R•
79
78
51
5457
59
60
59B 59C•KTB3P•
•KTB3P•
67 67
68
•FT01S•
•KFT27•
•KFT28R•
66 13A 14
7
12
•EXB1•
•EXB1B•
•EXS90Q••EXBR•
45
7
15
11
7
88109 4 13 14
81
Brake Systems & Partspages 14-17
Wheel Hubs & Partspages 88-89
Axles, Bearings & Flangespages 10-12
Sidepodspages 66-67
Exhausts & Mufflerspages 52-55
Wheels & Partspages 86-87
Chains & Chainguardspages 26-27
Engine Mountspage 49
Steering Wheelspages 74-75
Seats & Partspages 68-69
DPE not only manufactures and supplies parts for our own Arrow
karts, but have a range of universal chassis parts to suit most other
kart chassis’. Our large manufacturing and purchasing power
enables us to offer competitive pricing on our whole range of kart
products, EVEN TO OTHER KART MANUFACTURERS!
So, no matter if it’s a part shown here, on the previous exploded
picture, or anywhere else in this catalogue, don’t hesitate to
contact us regarding your requirements. Whether you’re after one
piece or a thousand, we’re here to help you…
DPE not only manufactures and supplies parts for our own Arrow
karts, but have a range of universal chassis parts to suit most other
kart chassis’. Our large manufacturing and purchasing power
enables us to offer competitive pricing on our whole range of kart
products, EVEN TO OTHER KART MANUFACTURERS!
So, no matter if it’s a part shown here, on the previous exploded
picture, or anywhere else in this catalogue, don’t hesitate to
contact us regarding your requirements. Whether you’re after one
piece or a thousand, we’re here to help you…
Floortray Washers & Spacers
•KFT30• Black Washer (reverse)
•KFT30/10• Carded version
•KFT28• Black Countersunk Washer
•KFT28/10• Carded version
•KFT27• Rubber Spacer
•KFT27/10• Carded version
•KFT28R• Red Countersunk Washer
•KFT28R/10• Carded version
•KFT29• Yellow Countersunk Washer•KFT29/10• Carded version •KFT27R• Red Soft Spacer
•KFT27R/10• Carded version
•KFT31• Yellow Washer
(reverse)
•KFT31/10• Carded version
Pedal Pivot Springs•KP24• Throttle
•KP25• Brake
Torsion Bar Clamps25.4mm I.D:•KTB3A• polished alloy•KTB3P• purple•50KTB3• gold
31.8mm I.D:•KTB4• polished alloy•KTB4P• purple
60
•HRS6• Alloy Heel Rest
Steering Shaft Lower Pillowball•KSS9A•
Pedal Springs•KP21• 100mm long
Seat Supports•KSE14L• left (360mm)•KSE14LS• left (340mm)•KSE14R• right (310mm)
•KSE15LF• AX8-CIK left front (325mm)•KSE15LR• AX8-CIK left rear (375mm)
•KSE15RF• AX8-CIK right front (330mm)•KSE15RR• AX8-CIK right rear (375mm)
•KSE16LF• AX8-125 left front (325mm)•KSE16LR• AX8-125 left rear (370mm)
•KSE16RF• AX8-125 right front (342mm)•KSE16RR• AX8-125 right rear (385mm)
Machined Pedal Studs•KP22• 8/10mm•KP22/2• Carded
King Pins (Precision ground)
•KKP3B• 85mm•KKP3• 75mm
•KKP3C• 92mm
Tie Rod Ends•KTR15• male, R/H thread•KTR14• male, L/H thread
•KTR18• L/H thread•KTR19• R/H thread
female, R/H threadfemale, L/H thread
Tie RodsOur range includes various lengths of both
bare and complete (inc. ends) tie rods to suit almost any kart. Available in polished,
gold or purple anodised alloy, and steel.Consult DPE Price List for full
details and product listing.
Stub Axle Extension Set•KSA34• Increases front track by 60mm. Includes spacers (suits 12x1.25 threaded stubs only)
•KSA34/1•Carded version
Stub Axle Spacers•KSA31• 5mm wide, silver•KSA32• 10mm wide, silver•KSA33• 20mm wide, silver
•KSA33P• 5mm wide, purple•KSA33P1• 10mm wide, purple•KSA33P2• 20mm wide, purple
Also available:•50KSA33• 5mm wide, gold•50KSA331• 10mm wide, gold•50KSA332• 20mm wide, gold
Display packets also available.(Refer to price list for correct part number)
King Pin Bearings
•KSA26• 8mm I.D.
•KSA28• 10mm I.D.
•KSA28/2• Carded version
Steering Shaft Lower Pillowball•KSS9A•
•KSS9A/B• Carded version, contains 1 x •KSS9A• & 1 x •KSS9B•
Steering Shaft Circlip•KSS9B•
•KTR13••KTR12•
Kart Stand/TrolleyMobile kart stand & trolley to suit most karts.
Folds flat for easy storage and transport.
•K03• (complete)•K02• (bare, without wheels)
•K04• (wheel & tyre)
Kart Push Starter•K10•The safest and most convenient way to push start karts. Simply place rear of kart on trolley, push, then flick the lever to drop the kart onto the ground, and it’s away!
Every racer knows the
importance of keeping
their kart clean and in
good condition. Kartech
& MiR kart covers
protect karts from the
elements, while the
trolleys and stands make
working on karts and
transportation easy.
Kart Stand•K01•
Static kart stand to suit most
karts. Folds flat for easy storage.
Kart Stand/Trolley•K08•Heavy duty mobile kart stand & trolley. Suits most karts. Disassembles for storage and transport.
Kartech Kart Cover•K06•Silver waterproof, inc. carry bag. Universal size fits most karts.
MiR Kart Cover•MK00•Black waterproof, inc. carry bag. Universal size fits most karts.
62
Chain Lube – Kartech•OCK• 500ml squeeze pack
Box quantity: 12
Kartech’s special “high cling - low fling” formulation
ensures the chain lube stays exactly where it’s meant to
be – on the chain and not all over your kart! Suitable for both conventional and ‘O’ ring chains, it comes in an
economical and easy to use 500ml squeeze pack. You
won’t find a better value for money chain lube!
Chain Lube – Motul•OCM• 400ml aerosolBox quantity: 12
Its special formulation penetrates deep into the links, reducing friction and power loss. It is particularly suited to longer races where sustained chain lubrication is critical, or for those seeking the ultimate chain lube.
Brake & Carb Cleaner•OBCC• 300g aerosolBox quantity: 6
Spray onto brake disc and pads to clean and restore maximum braking power – no scrubbing or wiping is necessary!Equally suitable for cleaning carburettors and parts, including jets. The aerosol pack allows easy penetration into hard to get at places.
Every kart can only perform at its best when it is properly
cleaned and lubricated. DPE supply a range of cleaners and lubricants
which are sure to keep any kart performing at its optimum.
Shell 2T Max•OMAX• 1L
Box quantity: 6
Recommended for engines with oil-injection and premix
systems and specifically for use in Rotax Max engines.
Shell 2T Max is a fully synthetic premixed high performance
oil for air and watercooled 2-stroke engines with high
specific output. Shell 2T Max provides protection for very compact engines operating
under extreme conditions &/or in high thermal stresses.
Our CIK homologated nosecones
are made from tough and
durable plastic, providing the
ultimate in appearance and
protection for your valuable kart.
CIK Nosecone - bare•NOCCB• blue •NOCCBK• black •NOCCR• red•NOCCS• silver •NOCCW• white •NOCCY• yellow
CIK Nosecone - complete inc. mounting kit•NOCCBC• blue •NOCCBKC• black •NOCCRC• red•NOCCSC• silver •NOCCWC• white •NOCCYC• yellow
Heavy Duty Hire Kart Nosecone•NOCOBKHD• black only
Very popular due to its incredible strength and durability
•NOCC01• Clamp Set (2 clamps)•NOCC02• Plastic clip (red)
Nosecone Fitting Parts - CIK type
65
DPE – always the innovators, not the imitators! Once
again, we offer an exciting alternative to the standard
products you are used to… the unique DPE Nassa Panel.
Made from tough plastic in a range of colours, and fully
CIK homologated, DPE once again sets the pace
both on and off the track.
CIK Nassa Panels•NPAB• blue•NPABK• black•NPAR• red•NPAS• silver•NPAW• white•NPAY• yellow
Nassa Panels - AX6 style•NPB2• blue•NPBK2• black•NPR2• red•NPSA• silver arrow•NPW2• white•NPY2• yellow
Sidepod - Hire Kart
•HKSP• (black only)For the rental kart operator, or anyone who wants to cut running and repair costs, consider these 2kg versions of our AERO pods. They’re not quite indestructible, but they’re very close!
Sidepod - Rooky/Midget
•SI07• black •SI086• AX6 blue•SI09• yellow •SI10• white •SI11• red
Sidepod Bolt Kit
•SI30•includes 8 each:countersunk capscrews (6x20),countersunk washers,penny washers & nyloc nuts
Hire Kart SidepodLength: 665mm Width: 190mm Height: 185mm
Rooky/Midget SidepodLength: 535mm Height: 180mm Weight: 980g each
Sidepod Bars - universalDesigned to fit a wide range of karts. Available in both 19mm & 20mm diameters.
•SI20• 19mm LH •SI21• 19mm RH•SI24• 20mm LH Rotax/Universal•SI25• 20mm RH Rotax/Universal
Sidepod - AX6 style*
•SI50• black •SI51• blue•SI52• yellow •SI53• white •SI54• red •SI55• silver
AX6 style SidepodLength: 665mm Height: 185mm Weight: 1,100g each
Sidepod - AERO style*
•SI60• black •SI61• blue•SI62• yellow •SI63• white •SI64• red
AERO style SidepodLength: 665mm Height: 185mm Weight: 1,150g each
*AX6 style & AERO sidepods are not CIK approved
Sidepod - CIK
•SI70• black •SI71• blue•SI72• yellow •SI73• white•SI74• red •SI75• silver
DPE’s Aero and F1 range of pods were popular all around the world,
and this new range takes up from where they left off. The same unique
manufacturing process has been used, so they are able to withstand much
more than other brands. The all new range features F1 aerodynamic
styling – to stand out from the crowd – and is CIK homologated.
Length: 685mmWidth: 185mmHeight: 200mmweight: 1,100g each
67
If you want to be in the winner’s seat, simply fit one of ours! DPE have a complete range of sizes to suit every kart racer, from Midgets through to Super Heavy drivers. With two different styles of race seats to choose from, as well as ‘soft’ and ‘stiff’ versions of the Kartech RT seats, there is sure to
be one to fit you perfectly.
Our range also includes extra strong, reinforced hire kart seats which will take almost any punishment dished out to them, seat covers and, of course, all the fitting hardware needed to fit the seat to your kart, including our unique ‘self-aligning’ seat washers which are designed to eliminate any misalignment
and ‘preload’ within the kart from fitment of the seat.
•SE74P• (purple)
•BNC855• 8x55
•BNC860• 8x60
•BNC850• 8x50
•BNC845• 8x45
•BNC840• 8x40
•BNC835• 8x35
•BNC830• 8x30
•SE72• alloy •50SE72• gold •SE72P• purple
•SE65• alloy •50SE65• gold •SE65P• purple
•SE66• alloy •50SE66• gold •SE66P• purple
Seat strengthening washers 1.6 x 60mm, 8.5mm hole
Black plastic countersunk seat washer •SE71•
Black plastic tapered seat spacer •SE70•
Black plastic seat spacer •SE67• 8mm
Red plastic countersunk seat washer
•SE71R•
Red plastic taperedseat spacer
•SE70R•
Red plastic seat spacer
•SE67R• 8mm
Countersunk washers (alloy)
•SE73L• alloy
•SE73S• alloy •SE73SP• purple‘Self-Aligning’ washers (alloy)
Seat spacers (7mm alloy)
Seat spacers (12mm alloy)
Hire Kart SeatExtra strong reinforced fibreglass•SEH7• XX Large•SEH8• XX Large (suits DPE ‘Wild Thing’ only)
Padded Seat Cover•SE81• Seat Cover, black•SE84• Midget/Rooky Seat Cover, black
Seat rubber•SE69• 6mm
For full listing of bolts, nuts & washers available, see ‘Bolts & Nuts’ section of DPE Price List
•SE74• (alloy)
Seat Bolts
•50SE74• (gold)
69
‘Euro’ Style SeatConventional design, Soft construction seat.
See table at left for product codes and details of sizes available
Narrowest measurement
see table for sizes/styles available
Narrowest measurement
see table for sizes/styles available
Kartech ‘RT’ Style SeatDeep sided design for added driver support.
Stiffer construction than Euro Style
Seat. Available in ‘Soft’ and ‘Stiff’ versions.
See table at left for product codes and details of sizes
available
‘Stiff’
‘Soft’
Narrowest measurement
see table for sizes/styles available
Product Narrowest Code Description Measurement
•SEK80• Kartech ‘RT’ – Midget/Rooky (Soft) •SEK81• Kartech ‘RT’ – Junior (Soft) •SEK82• Kartech ‘RT’ – Extra Small (Soft) 285mm •SEK83• Kartech ‘RT’ – Small (Soft) 305mm •SEK93• Kartech ‘RT’ – Small (Stiff) 305mm •SEK84• Kartech ‘RT’ – Medium (Soft) 320mm •SEK94• Kartech ‘RT’ – Medium (Stiff) 320mm •SEK85• Kartech ‘RT’ – Large (Soft) 330mm •SEK95• Kartech ‘RT’ – Large (Stiff) 330mm •SEK86• Kartech ‘RT’ – Extra Large (Soft) 345mm •SEK96• Kartech ‘RT’ – Extra Large (Stiff) 345mm
•SEE1• Euro Size 1 – Extra small 270mm •SEE2• Euro Size 2 – Small 290mm •SEE3• Euro Size 3 – Medium 310mm •SEE4• Euro Size 4 – Large 340mm
•SEH7• Kartech – XX Large, suits hire kart 400mm
•SEH8• Kartech – XX Large 400mm (suits DPE ‘Wild Thing’ only)
Crankshaft spec’s Sprocket sizes available (T)Engine/Model taper (mm) dia. (mm) Sprocket type 9 10 11 12 13 14
Yamaha KT100J/ Grnd bore/shotpeened •SP09• •SP10• •SP11• •SP12• •SP13• •SP14•
Early model KT100S 10-14mm 10mm Packaged (qty. 1) •SP09/1• •SP10/1• •SP11/1• •SP12/1• •SP13/1• •SP14/1•
KSI ‘Economy’ •SPB09• •SPB10• •SPB11• •SPB12• •SPB13• •SPB14•
Yamaha KT100J/ Grnd bore/shotpeened – •SP10I• •SP11I• •SP12I• •SP13I• –
Early model KT100S Inboard 10-14mm 10mm Packaged (qty. 1) – •SP10I/1• •SP11I/1• •SP12I/1• •SP13I/1•
KSI ‘Economy’ – •SPB10I• •SPB11I• •SPB12I• •SPB13I•
European engines/ Grnd bore/shotpeened •SP09E• •SP10E• •SP11E• – – –
Yamaha KT100SD 12-15mm 12mm Packaged (qty. 1) •SP09E/1••SP10E/1• – – – –
KSI ‘Economy’ •SPB09E• •SPB10E• – – – –
Grnd bore/shotpeened •SP09R• •SP10R• – – – –
Rotax VM95 onwards 12mm KSI ‘Economy’ – •SPB10R• – – – –
Inboard ignition type – •SPB10RI• – – – –
Vortex KSI ‘Economy’ – •SPB10V• – – – –
Kartech SprocketsDPE offer our own high quality sprockets, at a very affordable price. Manufactured from an alloy not previously available in Australia, these sprockets will astound you with their quality and, of course, price. Available in sizes 65T – 96T.
•SPK65• = 65T •SPK66• = 66T •SPK96• = 96T (Digits in code number indicate number of teeth)
NOTE: This chart is a guide only. Actual sprocket required depends on crankshaft fitted to engine. As this may vary, check crankshaft model and details to ensure correct sprocket required.
European engines/Yamaha KT100SD
KSI Sporcket to suit European engines/Yamaha KT100SD
RotaxYamaha KT100J/early KT100S
Inboard
71
DPE is always ‘GEARED’ to your needs.
So, no matter what sprockets, sprocket hubs or
associated equipment you need, we are sure to
have it.
Our high quality, yet economical, Kartech range
axle sprockets provide the best of both worlds
– low price and high durability and life.
DPE’s drive sprockets have ground bores,
are produced using the latest gear cutting
technology, and then shot peened for longer life
– you won’t buy a better sprocket! On top of
that we have a full range of KSI drive sprockets.
And who could forget our striking range of
anodised sprocket hubs, or heat treated alloy
range – both available in a wide range of sizes.
Sprocket Hubs – AlloyManufactured from premium quality alloy, and heat treated
for added strength Available to suit 25, 30, 35 & 40mm axles
Locating diameter: 116mm. PCD: 134mm. Keyway: 6mm
•SPH25• 25mm •SPH30• 30mm•SPH35• 35mm •SPH40• 40mm
Also available: •SPH306• 30mm (fully machined both sides)
Sprocket Hubs – Purple Billet AlloyManufactured from premium quality alloy, and heat treated
for added strength Available to suit 40mm & 50mm axles
Locating diameter: 116mm. PCD: 134mm. Keyway: 8mm
•SPH40DP• 40mm •SPH50• 50mm
Sprocket Hubs – Gold Billet Alloy•SPH40D• (40mm), has both 6mm & 8mm keyways
NGK Spark Plug Cap – Silicone•SPP02•
NGK Spark Plug Cap – Rotax 125 Max•SPP02R••SPP02R/1• Carded version
NGK Spark Plug Cap – Bakelite•SPP01•
•SPP01/1• Carded version
Denso is one of the world’s largest manufacturers of components for motor vehicles. Their
range of spark plugs includes those for special performance applications, such as kart racing. Denso products have been proven on roads and race tracks around the world for almost 50 years.
Denso Spark Plugs
•SPPNP29• (W29EPT)•SPPNP31• (W31EPT)
•SPPN24• (W24ES-ZU)•SPPN27• (W27ES-ZU)•SPPN29• (W29ES-ZU)•SPPN31• (W31ES-ZU)
‘EPT’ indicates platinum racing type plugs, with platinum ground electrode and copper cored centre electrode
‘ZU’ indicates platinum racing type plugs, with platinum ground electrode and platinum tip centre electrode
72
NGK Spark Plugs and related ignition
products are renowned throughout
the motorsport world for quality,
power and performance. NGK’s
superior manufacturing processes and
construction materials ensure optimum
electrical performance in every engine.
NGK Spark Plugs To suit Rotax FR125 Max:
•SPPEGV08• (B8EGV)• •SPPEIX08• (Iridium)•SPPEGV085• (B85EGV) •SPPEIX09• (Iridium)•SPPEGV09• (B9EGV) •SPPEIX10• (Iridium)•SPPEGV095• (B95EGV) •SPPEGP95• (B95EGP)•SPPEGV10• (B10EGV) •SPPEGV105• (B105EGV) To suit Comer S-80:•SPP8• (B8EV) •SPPBPM6A• (BPM6A)•SPP9• (B9EV) •SPPBPM7A• (BPM7A) ‘EV’ indicates plugs with gold palladium construction‘EGV’ indicates racing plugs with gold palladium construction
NGK Spark Plug Lead Joiner•SPP04••SPP04/1• Carded version
NGK Spark Plug Lead/Cap Assembly•SPP03•
Steering Wheel•ST2•
Hire Kart/Fun Kart with strengthened centre
Weight: 938gDiameter: 305mm
Steering Wheel•ST1•
A truly versatile performer!
An attractive wheel with comfortable soft moulded
grip, yet increasingly popular with the rental kart industry,
where its heavy duty construction easily copes with the harsh demands.
Weight: 1232g. Diameter: 305mm
Steering Wheel•ST1C• (mini)Caliba small diameter, soft
grip, alloy spokesWeight: 914g
Diameter: 285mm
Steering Wheel•ST6C•
Caliba Sport-Kart black/red comboWeight: 784g Diameter: 310mm
Steering Wheel•ST7D•
Dark blue suede ultralightWeight: 480g Diameter: 305mm
75
Steering Wheel•ST8•Dark blue suede ultralight with
white fl at top and Arrow logoWeight: 480g
Diameter: 305mm
DPE offer a large range of
steering wheels for all
karting applications.
We manufacture,
import and distribute
the fi nest crafted
steering wheels from
Australia and around
the world. All steering
wheels are ergonomically
designed for maximum
comfort and control, while
being able to withstand the
rigours of kart racing.
Steering Wheel•ST7R•Red suede ultralightWeight: 480g Diameter: 305mm
Steering Shaft Bushes•STBN• (black nylon) 19mm bore•STBNR• (red nylon)19mm bore•STBNR2• (red nylon) 20mm bore
Steering Shaft Lock Collars•KSS9C• 19mm polished alloy, inc. 2 grub screws
•KSS9CP• 19mm anodised purple, inc. 2 grub screws
•KSS9C2• 20mm polished alloy, inc. 2 grub screws•50KSS9• 20mm gold, inc. 2 grub screws
Washers•STWW• (alloy)•STWWP• (purple)•50STWW• (gold)
Steering Boss – Alloy•KSBO2• 19mm polished alloy
•KSBO3• 19mm purple, fully machined
•KSBO22• 20mm polished alloy
For ‘Alfano’ steering wheel and fi tting hardware, refer to page 82 in this catalogue
When it comes to numbers, Number 1 is
the most important. Every customer is
Number 1 in our eyes. No matter what
number you race under, DPE has the
number plates, adhesives and numbers to
keep your kart looking great.
•NP3• Small, suits 16mm tube (front bumper)
Number Plates200x200mm (8”x8”)
•NP1• Yellow•NP1W• White
Number Plate adhesives170x195mm
•NP5• Yellow•NP5W• White
•NP5•
•NP6•
•NP5W•
•NP6W•
White Sidepod Number adhesives200x145mm
•NP6WS• White
Nassa Panel Number Plate adhesives205x200mm
•NP6• AX6 Yellow •NP6W• AX6 White
•NP7• AX8 Yellow •NP7W• AX8 White (full gloss) (full gloss)
Number SetsBlack numbers:•N0ALL•0–9 (x10 of each)100 numbers in total
Red numbers:•N0ALLR•0–9 (x10 of each)100 numbers in total
Numbers - Conventional typeBlack numbers: •N00• = 0, •N01• = 1, •N02• = 2 etc.Red numbers: •N0R0• = 0, •N0R1• = 1, •N0R2• = 2 etc.
Last digit in code number indicates sticker numberie. •N01• = 1, •N02• = 2 etc.
Number Plate Clips
•NP4• Large, suits 19mm tube
(rear bumper)•NP2• Yellow•NP2W• White
Number Plates250x200mm (10”x8”)
Number Plate Clips
77
The ultimate kart alignment system is here
– the Sniper! Combining the very best in design,
manufacturing and laser technology, the Sniper
systems make front end and full kart alignment a
simple and accurate process. From simple toe-in/toe-
out adjustment, to camber and caster changes, and
right through to full front-rear chassis alignment,
the Sniper is the simplest and most accurate way to
ensure your kart is set up to perfection.
Sniper – Standard•T11•Suits sprint karts without front brakes. Includes: 2 x Sniper units2 x stub axle spacers
Stub Axle Adapters•T11E17•
Suit 17mm stub axles. For use with •T11B•
Stub Axle Adapters•T11E25•
Suit 25mm stub axles. For use with •T11B•
Sniper – Front Brake Karts•T11B•Suits karts with front brakes,
or significant negative camber. Includes:2 x Sniper units2 x stub axle spacers 2 x battery packs2 x 17mm adapters
Sniper – Full Alignment Kit•T11C•Suits all karts with or without front brakes. Includes: Aluminium Case, 2 x Sniper units, 2 x stub axle
spacers, 2 x battery packs, 2 x 17mm adapters,
2 x rear axle plates, spirit level &
holder.
78
Tyre Inflation Ring•T22A•
Allows easy tyre fitment, and eliminates damage to tyres due to overinflation
Tyre Bead Breaker•T21•
Quickly and effortlessly releases tyre bead from 5” & 6” front & rear wheels
Tyre Changing Tool Set•T23•Includes lever & disc. You’ll wonder how you ever survived without this fabulous tool. No more skinned and bruised knuckles – removes and refits tyres in seconds
Exac-Toe Front End Alignment System•T10EC• Set (inc. bar)•T10E• Set (no bar) •T10EB• (bar only)
Front End Alignment Plates•T10• 2 piecesFor checking toe in/toe out and camber
Caster/Camber Adjuster Spanner Set•T24• 2 pieces
For use with DPE Camber/Caster Kit (•KKP6ASS•)
DPE’s huge range of tools, tape, stopwatches and tachometers cover every area of
karting. Whether you’re changing a tyre, adjusting a carburettor or making rapid
repairs between races, DPE have the tools to make your job easy. We are one of
the world’s largest stockists and manufacturers of quality tools designed and built
specifically for kart racing applications.
Tachometer•TAC1•
Economically priced tachometer with maximum RPM recall. Suits either 2 or 4 stroke. Large, easy to read digits and low
battery indicator. Size: 81x60x27mm
Kartech Stopwatch•TISW•
Features include 60 recallable lap and split memory, lap counter, fastest, slowest and average lap time display,
plus much more...
Digital Water Temperature Gauge•TTGW•Monitor water temperature for safety and performance. Maximum temp recall., easy to fit, easy to read, on/off switch for extended battery life.A must for FR125 Max users.
Tyre Gauge•T35•
0–40psi/2.7bar, 90mm diameter gauge for easy use.
Has handy pressure release valve, clip on valve fitting, and rubber
boot for protection
Tyre Gauge•T25•
0–40psi/2.7bar, 65mm diameter gauge. Has handy pressure
release valve, clip on valve fitting, and rubber boot for protection
Carburettor Inlet Lever Height Gauge•T03L•
Has 0.8, 1.0, 1.2 & 1.4mm settings for quick and easy adjustment
Carburettor Pressure/Blow Off Gauge•T03A•For checking and adjusting needle and seat blow off point, and for ensuring carb holds pressure. Highly accurate
Kartech Adhesive Tape•TAPKA• (Kartech)White adhesive tape with a multitude of uses.50mm x 66m
Insulation Tape•TAPI•Black, 18mm x 20m
Cloth Race TapeThe racer’s instant repair kit! It’s amazing the number of uses this
product has – don’t leave home without it
48mm wide x 25m long
•TAPCB• (Blue) •TAPCBK• (Black) •TAPCR• (Red)
Engine Pressure Test Kit•T14• Yamaha engines •T15• European engines
An essential tool to check for air leaks – use with •T03A•Kit includes sealing plate and bung
•T14•
•T15•
Circlip Fitting Tool•T40• 14mm for 100cc engines•T41• 15mm for Rotax 125 Max engines
Unique tool for easy fitment of circlips
81
Sprocket Holding Tool•T18•
Fits all racing kart drive sprockets
T-Bar Allen Keys•T05• 5mm •T06• 6mm •T08• 8mm
•K09K5• combo •T09K8• 8mm shaft, 5 & 6mm handle Strong and dependable
Plastic coated for easy identification and use
Sprocket Puller•T16•Unique design which fits 9T – 14T drive sprockets
Yamaha Ignition/Rotax 125 Max Clutch Puller•T17•Suits both KT100S & KT100J engines, as well as Rotax 125 Max clutch
Chain Breaker•T02•Not only can this break a chain, but it also rejoins them!Every karter should have one in their toolbox
Also available: •T02P• Replacement bolt/pin
Chain Breaker - KSI•T02K•
Also available: •T02PK• Replacement bolt/pin
•T06••T08•
•K09K5• •T09K8•
•T02KP••T02K•
•T05•
Alfano Unit•TIAP•
Includes Alfano Pro Unit & Track Sensor
Download Pen•TIAPCD•
Water Temperature Sensor•TIAPW• Suits Rotax 125 Max
•TIAPWA• Suits ARC Spec 100W
Thermocouple for Air-cooled engine
•TIAPA•
Track Sensor•TIAPTS•
The Alfano Timing System is
renowned around the world
as one of the very best. The
magnetic strips installed into
tracks ensure there are no false
reading from other competitors’
transponders, and the clever
design, durable construction and
competitive pricing makes it the
logical choice for any competitor.
As well as the Alfano Unit and
associated hardware, computer
download cables and software
are available, along with
optional sensors for different
engine configurations.
For more details and the latest
Australian tracks fitted with
Alfano strips, visit the DPE web
site at www.dpeng.com.au
Alfano Steering Wheel•STAR• Red •STAB• Black
Includes steering wheel, unit holder, and fitting hardware (Alfano Unit and Steering Boss not included).
Alfano Steering Boss
•KSBA• Suits Alfano Steering Wheel and
20mm steering column
83
Bridgestone’s success in karting is second to
none and covers every level – from the sport’s
backbone of club level racing, extending right
up to the World Championships. Bridgestone are
also the chosen tyre for many ‘control’ classes
worldwide, whilst their high performance tyres
consistently dominate major meetings the
world over. And why do Bridgestone succeed
to such a high degree? Because they have
the same philosophy as sportspeople such
as yourselves…
Whether it’s Karting, Touring Cars, FIA GT Sportscars or Formula One, Bridgestone dominates the world over.
For more than two decades The Karters’ Choice...
The desire to improve, the need to do their best and the commitment to succeed!
84
Dry Wet Dry WetType SL Open Open Superkart
YES YGK YHB YHA YHP YBH YDH
4.0/10.0-5 •TYHP4•
4.5/10.0-5 •HKTB4• •TYGK4• •TYHB4• TYHA4•
4.5/11.0-5 •HKTB5•
6.0/11.0-5 •TYHB6• TYHA6• •TYHP6•
7.1/11.0-5 •HKTB7• •TYGK7• •TYHB7• •TYHA7•
5.0/11.0-6 •TYBH56• •TYDH5•
8.0/12.0-6 •TYBH86• •TYDH8•
CompoundSize
Hard Soft
TYRE SIZES & PRODUCT CODES
(Rental)
Wet TyresSee chart below for sizes, patterns and compounds available
Slick TyresSee chart below for sizes and
compounds available
DPE are the sole Australian importers and distributors of Bridgestone
Kart Racing Tyres. We can supply tyres suitable for all racing
classes as well as rental & hobby use from our large
range in stock.
We can also supply Dunlop slicks and wets, and
Vega slicks, which are used in other control classes
worldwide, at very competitive prices. Magnum
slicks provide a perfect combination of grip and
long life for the rental or hobby kart user.
Dunlop SL Wet Tyres•TYSLW14• 4.0 front•TYSLW16• 6.5 rear
Dunlop SL1 Slick Tyres•TYSL14• 4.5 front•TYSL17• 7.1 rear
Vega XSLA Slick Tyres•TYVXSL4• 4.5 front•TYVXSL7• 7.1 rear
Magnum Tyres(Rental Kart)•HKTM4• 4.5 front•HKTM6• 6.0 rear•HKTM7• 7.1 rear
Wheel – front magnesium(for use with front hubs)
Wheel – front magnesium
Wheel – rear magnesium
FRONT WHEELS
Code Diameter Width Weight* Description
•W20• 125mm (5”) 110mm 565g Symmetrical, no offset•W21• 125mm (5”) 120mm 585g Offset•W23• 125mm (5”) 95mm 550g Super offset•W24• 125mm (5”) 110mm 590g Super offset•W24SX• 125mm (5”) 110mm 605g Extra super offset, popular wet weather wheel•W25• 125mm (5”) 120mm 585g Super offset•W26B• 125mm (5”) 120mm 600g ‘CIK’ super offset, including bead retaining bolts•W27S• 125mm (5”) 120mm 680g Spoked, Silver/Black, super offset•W27SB• 125mm (5”) 120mm 680g Spoked, High Performance Black, super offset•W28• 150mm (6”) 120mm 810g Super offset•W29• 150mm (6”) 120mm 835g Super offset, including bead retaining bolts•W30• 125mm (5”) 140mm 590g Extra wide, offset•WMF• 125mm (5”) 120mm 555g Magnesium, super offset•WMFH• 125mm (5”) 120mm 555g Magnesium, super offset, for use with front hubs•HKW01• 125mm (5”) 120mm 655g Heavy duty, for hire karts, offset
REAR WHEELS
Code Diameter Width Weight* Description (** indicates wheels suitable for use as hubbed front wheels)
•W01• 125mm (5”) 200mm 720g Conventional•W03S• 125mm (5”) 200mm 725g Spoked, Silver/Black•W03SB• 125mm (5”) 200mm 725g Spoked, High Performance Black•W04• 125mm (5”) 200mm 740g ‘CIK’ conventional, including bead retaining bolts•W05• 125mm (5”) 120mm 495g Conventional**•W05S• 125mm (5”) 120mm 480g Spoked, Silver/Black**•W06• 125mm (5”) 150mm 575g Conventional•W06S• 125mm (5”) 150mm 565g Spoked, Silver/Black•W07• 125mm (5”) 175mm 625g Conventional•W07S• 125mm (5”) 175mm 620g Spoked, Silver/Black•W08• 150mm (6”) 200mm 900g Conventional•W09• 150mm (6”) 200mm 905g Conventional, including bead retaining bolts•W10• 125mm (5”) 220mm 705g Conventional, extra wide•W10A• 150mm (6”) 120mm 665g Conventional, also suitable Gearbox front wheel•WMR180• 125mm (5”) 180mm 490g Magnesium•WMR210• 125mm (5”) 210mm 540g Magnesium•HKW02• 125mm (5”) 175mm 705g Heavy duty, for hire karts, conventional
All wheels supplied with valves and/or bearings *Dry weight of wheel with valves and/or bearings, weights may vary slightly
DPE now offer a range of magnesium wheels.
These wheels are realistically priced and are quickly
gaining popularity, particularly with
the performance orientated karter.
86
Edwards Wheels are
known all around the
world. Their name
is synonymous with
high quality and
affordable prices.
DPE is one of the
largest purchasers
and suppliers of
Edwards Wheels, and
offer extremely
competitive prices
on the entire
Edwards range.
Wheel – rearWheel – front
Wheel – front including bead retaining bolts
Wheel – front spoked
Wheel – front spoked, blackincluding bead retaining bolts
Wheel – rear spoked
Wheel – rear spoked, blackincluding bead retaining bolts
To complement our wide range of wheels, DPE manufacture
and supply a complete range of hubs and wheel parts, including
our exclusively designed gold and purple billet alloy hubs with
unique wheel location inserts. These wheel hubs look a ‘million
dollars’ yet they actually cost less than most equivalent alternatives.
Wheel Hub – FrontComplete including studs, wheel nuts & bearings
•WHFD73• 73mm purple•WHFD89• 89mm purple
Wheel HubShort (58mm long)
•WH25S• 25mm •WH30S• 30mm•WH35S• 35mm •WH40S• 40mm
Also available •WH30SS• 30mmComplete including studs & wheel nuts
Wheel HubExtended (90mm long)
•WH25E• 25mm •WH40E• 40mm
Wheel HubAX6 style (90mm long)
Complete including studs & wheel nuts:•WH30E6S• 30mm •WH35E6S• 35mm
Also available as bare hub:•WH30E6• 30mm •WH35E6• 35mm
Wheel Hub/Disc Carrier - Front 125cc
•BRDHFB• Complete including bearings
Wheel Bearings•W52• 17mm•W53• 15mm
•W52F• 17mmto suit inner of 125cc front hub
Wheel Balance Weight Strip Pack •W51• 7g x 7 (22 strips)
Bead Retaining Bolts•W59• (bolt & ‘O’ ring)•W60• (‘O’ ring only)
Wheel Balance Weight Strip•W50• 7g x 7, self adhesive backing
89
Wheel location inserts•WH40WL•Hub locaters including ‘O’ Ring
Wheel Hub - RearAlso suitable as front hub for BRDHFBComplete including studs & wheel nuts:•WH40C50P• 50mm •WH40C70P• 70mm
Also available as bare hub:•WH4050P• 50mm •WH4070P• 70mm
Wheel ‘O’ Ring•WH40WLO•
Wheel/Tie Rod End Small
Washers•W57•
Special 8 x 13mm wheel washer
Tubeless Valves (short)•W56• 35mm length
Wheel Nuts•W54••W54/3• Carded versionExtra long (22mm) for deeper 8mm hex
Wheel Studs•W55• M8 x 35
•W55/3• Carded versionManufactured from hi tensile material and heat treated for extra strength and durability
DPE Billet Alloy Wheel Hub 65mm•WH40C65• complete •WH4065• bare
DPE Billet Alloy Wheel Hub 90mm•WH40C90• complete •WH4090• bare
DPE Billet Alloy Wheel Hub 125mm•WH40C125• complete •WH40125• bare
DPE Gold Billet Alloy Wheel HubsFits 40mm axle. Includes studs, wheel nuts, wheel location insert & pinch bolt. Has both 6mm & 8mm keyways. Also available as bare hub only.
Purple Billet Alloy Wheel Hub 90mmFits 50mm axle. Has 8mm keyway.
Includes studs, wheel nuts & pinch bolt: •WH50C90P• Also available as bare hub: •WH5090P•
9 10 11 12 13 14
65 7.22 6.50 5.91 5.42 5.00 4.64 66 7.33 6.60 6.00 5.50 5.08 4.71 67 7.44 6.70 6.09 5.58 5.15 4.79 68 7.56 6.80 6.18 5.67 5.23 4.86 69 7.67 6.90 6.27 5.75 5.31 4.93 70 7.78 7.00 6.36 5.83 5.38 5.00 71 7.89 7.10 6.45 5.92 5.46 5.07 72 8.00 7.20 6.55 6.00 5.54 5.14 73 8.11 7.30 6.64 6.08 5.62 5.21 74 8.22 7.40 6.73 6.17 5.69 5.29 75 8.33 7.50 6.82 6.25 5.77 5.36 76 8.44 7.60 6.91 6.33 5.85 5.43 77 8.56 7.70 7.00 6.42 5.92 5.50 78 8.67 7.80 7.09 6.50 6.00 5.57 79 8.78 7.90 7.18 6.58 6.08 5.64 80 8.89 8.00 7.27 6.67 6.15 5.71 81 9.00 8.10 7.36 6.75 6.23 5.79 82 9.11 8.20 7.45 6.83 6.31 5.86 83 9.22 8.30 7.55 6.92 6.38 5.93 84 9.33 8.40 7.64 7.00 6.46 6.00 85 9.44 8.50 7.73 7.08 6.54 6.07 86 9.56 8.60 7.82 7.17 6.62 6.14 87 9.67 8.70 7.91 7.25 6.69 6.21 88 9.78 8.80 8.00 7.33 6.77 6.29 89 9.89 8.90 8.09 7.42 6.85 6.36 90 10.00 9.00 8.18 7.50 6.92 6.43 91 10.11 9.10 8.27 7.58 7.00 6.50 92 10.22 9.20 8.36 7.67 7.08 6.57 93 10.33 9.30 8.45 7.75 7.15 6.64 94 10.44 9.40 8.55 7.83 7.23 6.71 95 10.56 9.50 8.64 7.92 7.31 6.79 96 10.67 9.60 8.73 8.00 7.38 6.86
1 lt 5lt 10lt 20lt
16:1 62.5ml 312ml 625ml 1250ml 18:1 55.6ml 278ml 556ml 1111ml 20:1 50ml 250ml 500ml 1000ml 25:1 40ml 200ml 400ml 800ml 50:1 20ml 100ml 200ml 400ml
500ml 1 lt 2lt 5lt
16:1 8 16 32 80 18:1 9 18 36 90 20:1 10 20 40 100 25:1 12.5 25 50 125 50:1 25 50 100 250
91
NOTE: All sizes, measurements and conversions should be regarded as approximate only. Sizes and manufacturers vary from country to country. Please CHECK ALL MEASUREMENTS prior to ordering to ensure correct fi tment.
MS Midget Sml
MM Midget Med
RS Rookie Small
YS Youth Small
YL Youth Large
XS X Small
S Small
M Medium
L Large
XL X Large
XXL XX Large
XXXL XXXL
Chest (A)
33” 84cm
34” 86cm
35” 90cm
38” 96cm
42” 106cm
43” 110cm
45” 114cm
47” 120cm
50” 128cm
53” 134cm
54” 138cm
55” 140cm
SleeveLength (B)
22” 55cm
22” 56cm
22” 57cm
23” 59cm
25” 63cm
26” 65cm
26” 65cm
27” 68cm
27” 69cm
27” 69cm
28” 70cm
28” 71cm
ShoulderWidth (C)
17” 43cm
17” 44cm
18” 45cm
19” 47cm
19” 49cm
20” 50cm
20” 51cm
21” 53cm
22” 55cm
22” 56cm
23” 58cm
23” 59cm
Inside Leg Length (D)
28” 71cm
29” 73cm
29” 74cm
30” 76cm
31” 78cm
31” 79cm
31” 80cm
32” 82cm
33” 84cm
33” 85cm
34” 86cm
34” 87cm
Waist (E)
28” 70cm
28” 72cm
31” 79cm
35” 88cm
39” 98cm
39” 98cm
40” 101cm
44” 112cm
47” 119cm
49” 124cm
50” 128cm
52” 131cm
Leg Length (F)
38” 96cm
26” 99cm
39” 100cm
41” 103cm
41” 105cm
42” 107cm
43” 108cm
43” 110cm
45” 114cm
46” 116cm
46” 118cm
46” 118cm
Top Body Length (G)
13” 32cm
13” 33cm
13” 34cm
14” 36cm
15” 39cm
16” 40cm
16” 41cm
17” 43cm
18” 45cm
19” 47cm
19” 48cm
19” 49cm
Suit measurements are ‘driver’ sizes (not suit sizes) and have been provided to give you an accurate guide to sizes to ensure your Driving Suit fi ts you perfectly. There is a lot of fl exibility in the sizing of our Driving Suits. Because Driving Suits are not a tight fi tting garment, each suit size will cover a range of driver sizes which are close to the measurements. Please note that it is more likely that the length measurements (B,F,G) will dictate suit size required.
MS Midget Small
MM Midget Med
RS Rookie Small
YS Youth Small
YL Youth Large
XS X Small
S Small
M Medium
L Large
XL X Large
XXL XX Large
XXXL XXX Large
Europe(MiR)
343638424648505458606264
AustralianNZ & GB
4567891011
USAStandard
678910111213
Japanese
242526
26.527.528.52930
European(MiR)
3738404142434446
Inches
9.7510.010.2510.7511.011.2511.7512.0
Centimetres
24.7525.526.527.2528.029.029.7530.5
These terms and conditions of sale shall apply to all sales of goods by Drew Price Engineering Pty Ltd (ACN 005 232 995) (“DPE”) to the Dealer named hereon (“the Dealer”).
1. The parties acknowledge that the contract embodied herein is made in the State of Victoria and shall be governed by the laws of that State. The parties agree to submit themselves to the jurisdiction of the Courts of the State of Victoria, Australia.
2. Orders & Delivery
2.1 Until such time as DPE accepts an order submitted by the Dealer, it shall not be obliged to supply the Dealer the goods so ordered PROVIDED ALWAYS:(a) that if at any time the Dealer goes into default in respect of its payment obligations hereunder, DPE may cancel or suspend any incomplete order that has been
accepted by it without being liable to the Dealer in any way whatsoever; and(b) that DPE shall not under any circumstances be responsible to the Dealer for any breach of its obligations to supply goods pursuant to any order that is accepted,
which failure to supply is caused by matters beyond its reasonable control (including but without limiting the generality of the foregoing) acts of God, acts of any Government, war or other hostility, national or international disaster, the elements, fire, explosion, power failure, equipment failure, strikes or lockouts, inability to obtain necessary supplies and the like and other force majeure occurrences.
2.2 Delivery of goods shall be deemed to have occurred on the happening of the first of the following events:(a) upon collection of the goods from DPE’s premises by a person authorised by the Dealer or a person who holds himself/herself out as having such authority; or(b) upon collection by or delivery to a carrier nominated by the Dealer; or(c) upon delivery to the Dealer’s premises or nominated address for delivery.
2.3 The Dealer is required to make its own arrangements regarding freight from DPE’s factory. If required, the Dealer may direct DPE to organise freight on its behalf subject to the Dealer paying for the freight and insurance directly upon receipt of the goods. The Dealer further agrees to indemnify and reimburse DPE should it be held responsible for any freight charges not paid for as aforesaid.
3. General Payment Obligations
3.1 In respect of the Dealer’s obligations to make payment for goods sold by DPE to the Dealer, time shall be of the essence.
3.2 Any payments tendered by the Dealer to DPE shall be applied as follows:(a) Firstly, to reimburse DPE for any collection fees or commissions, administrative costs, out of pocket expenses and legal costs referred to in clause 6.2 (b);(b) Secondly, towards any credit charges debited or chargeable to the Dealer’s account;(c) Thirdly, in payment for goods purchased by the Dealer (such payments being applied in the order of the age of such purchase commencing with the oldest purchase).
4. Credit Limit
DPE may, in its absolute discretion grant credit to the Dealer on such terms and conditions as it requires. Credit shall be assessed based on application by the Dealer in such form as DPE shall require from time to time. DPE is under no obligation to grant credit and DPE may withdraw credit or vary the terms of credit at any time upon seven (7) days prior notice in writing.
5. Terms of Payment
The Dealer shall pay for all goods sold to it by cash or cleared funds in advance of delivery. No credit shall be granted or deemed to have been granted unless by agreement in writing from DPE in accordance with Clause 4 hereof.
6. Default
If credit is granted and the Dealer fails to pay for goods sold to it by the date due pursuant to any credit granted (“Due Date”), purchases goods so as to extend its indebtedness to DPE beyond the Credit Limit, dies or becomes of unsound mind or permanently disabled, or any of the events referred to in clause 7.4 occurs (“Default Event”):-
6.1 the whole of the sum then owing by the Dealer to DPE for all goods sold by DPE to the Dealer shall immediately become due and payable and the Dealer’s credit shall be forfeited unless DPE has otherwise agreed in writing;
6.2 DPE may in its absolute discretion debit the Dealer’s account with:-(a) a credit charge calculated on the portion of the Dealer’s account overdue from time to time from the Due Date or the happening of the Default Event at a rate
being two percentage points higher than the rate prescribed by Section 2 of the Penalty Interest Rates Act 1983;(b) all collection fees and commissions, administrative costs, out of pocket expenses and legal costs (calculated on a solicitor and own client basis) incurred by DPE
as a direct or indirect consequence of such default.
7. Retention of Title
7.1 All goods delivered by DPE remain the property of DPE until all debts owing by the Dealer to DPE have been paid, notwithstanding that payments may be made for the purpose of settlement of specifically designated claims. Until payment of all debts owing, as aforesaid, the Dealer may sell the goods in the ordinary course of business as DPE’s fiduciary and agent (but the Dealer shall not hold itself out as such) and may, for the purpose of any such sale, part with possession of the goods. The goods shall be at the risk of the Dealer on delivery to the Dealer and the Dealer shall, at its cost, insure the same in DPE’s name against such risks as a prudent owner of goods would insure and for their full insurable value.
7.2 These provisions apply notwithstanding any arrangement under which DPE provides credit to the Dealer. To the extent there is any inconsistency, these provisions shall prevail.
7.3 DPE may recover the price of the goods by action, and may file an application for the appointment of a Liquidator to the Dealer, if the goods are not paid for within DPE’s usual credit terms, or any separate arrangement for credit made by DPE with the Dealer notwithstanding that property in the goods has not passed the Dealer.
7.4 Until payment of all debts owing to DPE, it may, without prejudice to any of its other rights, without any notice, retake and resume possession of any goods which remain its property and, by its servants and agents, enter upon the Dealer’s premises, or any other place where the goods may be, for that purpose if:-(a) there is breach of any contract between DPE and the Dealer;(b) the Dealer, or if more than one person in partnership, any member of that partnership commits any act of bankruptcy prescribed in the Bankruptcy Act 1966;(c) the Dealer, if a company, enters or allows itself to be subject to any form of external administration prescribed by the Corporations Law;(d) the Dealer parts with possession of the goods or any of them otherwise than by sale in the ordinary course of business.
7.5 Upon retaking possession of those goods for which payment has not been made, DPE shall, within reasonable time inspect those goods and credit the Dealer’s account with such sum as DPE in its absolute discretion considers to be a fair and reasonable value of the said goods after making due allowance for the price for which those goods were sold to the Dealer, the condition of the goods at the time of repossession and the costs incurred by DPE in connection with the repossession, sorting and examination of goods.
7.6 The dealer hereby authorises DPE to enter upon the premises where the goods are located without being liable for trespass and to use such reasonable force as may be necessary to gain entry for the purpose of recovery of its goods in accordance with this clause.
8. Claims & Returns
8.1 DPE shall not be obliged to recognise nor shall it be responsible in law or equity for any credit claims pertaining to short delivery or claims pertaining to damaged goods unless the Dealer has given written notice to DPE within 7 days of the date on which the goods in question were delivered to or collected by the Dealer.
8.2 Should the Dealer consider that it has any claim (other than claims of the nature referred in clause 8.1 hereof) against DPE which, having regard to these terms and conditions of sale, it is entitled to make, it shall :-(a) immediately upon becoming aware of the circumstances giving rise to such a claim, notify DPE of the nature of the claim;(b) allow DPE, its servants or agents, full and free access to the goods in question to which the claims is made (or the place where the goods have been applied or used) for
the purpose of conducting such tests and examinations as DPE may in its absolute discretion consider necessary to determine whether or not the claim is justified.
TERMS AND CONDITIONS OF SALE
92
93
8.3 If the Dealer wishes to return goods to DPE where it has no entitlement to make a claim against DPE in respect of those goods, DPE shall not be obliged to accept the return of those goods, but if it elects to do so, the Dealer’s account shall be credited with an amount equal to ninety percent of the price at which the goods were sold to the Dealer.
8.4 If any goods supplied pursuant to this agreement are supplied to the Dealer as a ‘consumer’ of goods or services within the meaning of that term in the Trade Practices Act 1974 as amended or similar State legislation the dealer will have the benefit of certain non-excludable rights and remedies in respect of the products or services and nothing in these terms and conditions excludes or restricts or modifies any condition, warranty, right or remedy which pursuant to the Trade Practices Act or similar Legislation is so conferred. However, if the product is a product not ordinarily acquired for personal, domestic or household use or consumption pursuant to s68A of the Trade Practices Act and similar provisions of relevant State legislation, DPE limits its liability to payment of an amount equal to the lowest of:(a) The cost of replacing the goods(b) The cost of repair of the goods(c) The cost of having the goods repaired or replaced
8.5 Under no circumstances will DPE, and it’s directors, officers, employees and associated companies, be liable to the Dealer for indirect, consequential or economic loss or loss of profits howsoever arising.
9. Exclusion of Implied Conditions & Warranties
9.1 The only conditions and warranties which are binding on DPE in respect of the state, quality or condition of the goods supplied by it to the Dealer are those imposed and required to be binding by statute (including the Trade Practices Act 1974) and to the extent permitted thereby, the liability, if any, of DPE arising from the breach of such condition or warranties shall at DPE’s option be limited to and completely discharged by either the supply by DPE of equivalent goods or the replacement by DPE of the goods supplied to the Dealer and otherwise all other conditions and warranties in respect of the state, quality or condition of the goods supplied by DPE to the Dealer are hereby expressly excluded and negatived.
The Dealer also acknowledges that:-(a) Prior to taking delivery of the goods, the buyer conducted a thorough examination of the goods : and –(b) No warranty, condition, description or representation in relation to the goods is given by the seller, expressly or implied by this agreement or outside this agreement.(c) All warranties, terms and conditions in relation to the state, quality or fitness of the goods and of every other kind whether expressed or implied by use, statute
or otherwise is excluded.
9.2 Except as to the extent provided in this clause 9, DPE and it’s directors, officers, employees and associated companies, shall have no liability (including liability in negligence) to any person for any loss or damage, consequential or otherwise, howsoever suffered or incurred by any such person in relation to the goods sold by DPE to the Dealer, and without limiting the generality thereof, any loss or damage consequential or otherwise howsoever suffered or incurred by any such person caused by or resulting directly or indirectly from any failure, defect or deficiency of whatsoever nature or kind of or in the goods or associated with delayed delivery.
9.3 The Dealer hereby indemnifies DPE and it’s directors, officers, employees and associated companies, and shall keep DPE and it’s directors, officers, employees and associated companies, indemnified (to the extent permissible by law) in respect of any loss or damage consequential or otherwise howsoever suffered or incurred by any person caused by or resulting directly or indirectly from any failure, defect or deficiency of whatsoever nature or kind of or in the goods.
10. Dealer Changes
10.1 The Dealer acknowledges :-(a) that if it changes the entity under which it trades, it shall be its responsibility to notify DPE of such change and to separately negotiate conditions of sale under
which the new entity may commence trading with DPE;(b) that until a new trading arrangement with the new entity has been negotiated and accepted by DPE in writing:-
(i) the Dealer named herein shall remain liable for payment to DPE for all goods ordered or purchased by such new entity;(ii) it shall not be open for the Dealer to raise as a defence in any proceeding commenced by DPE for the recovery of such sums owing to DPE under these terms
and conditions of sale that the debt was incurred by a person other than the Dealer.
10.2 The Dealer shall notify DPE of any change in the composition of its directors, shareholders, partners or principals within 14 days of such change taking effect. Upon receipt of such advice, DPE may require at its discretion any new director, shareholder, partner or principal of the Dealer to execute a personal guarantee and indemnity in respect of the Dealer’s obligations hereunder.
10.3 The Dealer shall notify DPE of any change in its address not later than 7 days prior to such change occurring.
11. Unauthorised Purchases
The Dealer acknowledges :-11.1 that it is not possible for DPE to ascertain whether a person seeking to purchase goods from DPE on credit has the authority of the Dealer to do so;11.2 that it shall remain liable to pay for any unauthorised purchases;11.3 that it is prepared to take the risk that it may become liable for purchases made by an unauthorised person;11.4 that it is aware that it can insure against such a risk.
The Dealer warrants to DPE that it shall take reasonable steps to ensure that unauthorised persons are prevented from making unauthorised purchases and agrees to indemnify DPE and keep DPE indemnified against all and every loss that DPE may sustain as a result of any unauthorised purchase.
12. Waiver
No waiver by DPE of any breach of these terms and conditions of sale shall operate as a waiver of another breach of the same or any other terms and conditions of sale and the doing and/or omission of any act, matter or thing by DPE, its servants or agents (which, but for this clause ought or might amount to a waiver of DPE’s rights in respect of any such breach or default) shall not operate nor be deemed to be a waiver in any way of DPE’s rights and powers in respect of such breach or default, any rule of law or equity to the contrary notwithstanding.
13. Privacy Act Authority
For the purposes of assessing the credit worthiness of the Dealer or the guarantors from time to time and the collection of payments, the Dealer and/or the guarantors hereby irrevocably authorise DPE, its servants and agents to make such enquiries as they may deem necessary including, but not limited to, making enquiries with and obtaining reports (as may be allowed by law) from persons nominated by the Dealer as trade referees, the Dealer’s creditors, bankers and financiers, credit providers, mortgage and trade insurers and credit report agencies (hereinafter call “the Information Sources”) and the Dealer and/or the guarantors agree and consent to the Information Sources providing to DPE such information as is requested by DPE and permitted to be given by law for the aforesaid purposes. The Dealer also consents to DPE disclosing the contents of any credit report or personal information to a credit reporting agency for the purpose of that credit reporting agency creating or adding to any credit information filed in relation to the Dealer.
14. These terms and conditions supersede and exclude all prior and other discussions, representations, (contractual or otherwise) and arrangements relating to the supply of the goods or any of the goods including, but without limiting the generality of the foregoing, those relating to the performance of the goods or any part of the goods or the result that ought to be expected from using the goods.
Drew Price Engineering Pty Ltd 57-59 Nantilla Road, Clayton North, Victoria 3168 Australia Postal Address: PO Box 4105, Mulgrave, Victoria 3170 AustraliaPh: (03) 9545 3944 Fax: (03) 9545 3743 (International, Ph: +61 3 9545 3944 Fax: +61 3 9545 3743) FreeCall Sales Fax No. (within Australia only) 1800 670 735
ABN 92 059 150 693 Web site: www.dpeng.com.au Email: [email protected]
PRODUCT PAGE
Adhesive tape 80Adjusting spanners – camber/caster 81Airboxes & accessories 8-9Air fi lter 8Alfano timing system 82Alignment plates – front end 78Alignment systems - Exac-Toe 78Alignment systems - Sniper 77Allen keys – T-bar 81Apparel – Kartech 30-31Apparel – MiR 29Axles & parts 10-11Axle Bearings 10-11Axle sprockets 70-71Axle Tuners 11Badges – embroidered 32Bag – Arrow 31Bags – MiR 29Bead retaining bolts 88Bearings – Axle 10Bearings – engine (Yamaha) 47-48Bearings – king pin 61Bearings – wheel 88Bearing fl anges 11Bodywork – nassa panels 65Bodywork – nosecones 64Bodywork – sidepods 66-67Bolts, nuts, screws etc. 19Bolts – bead retaining 88Bolts – seat 68Boots – MiR 29Brake cables 22-23Brake calipers & parts 14-16Brake cleaner 63Brake discs 20-21Brake hubs 20-21Brake lines 14Brake pads 17Brake parts 14-16Brake systems 14-15Bridgestone badges 32Bridgestone stickers 32Bridgestone tyres 83-85Cables & fi ttings 22-23Cable clamps 23Cable ties 23Calipers – brake 14-16Cap – Rotax 33
Capscrews 19Carburettors & parts 24-25Carburettors – Rotax 24Carburettors – Walbro 25Carburettor cleaner 63Carburettor height level gauge 80Carburettor pressure tester 80Camber/caster adjusting spanners 78Chains & parts 26-27Chain breaker 81Chain guards 26-27Chain guard brackets 26-27Chain lube 63Chassis parts 58-59Chassis parts – universal 60-61Cleaner – brake & carb 63Clutches 28Clutch puller 81Comer S-80 engine 42-43Compression springs 23Covers – kart 62Denso spark plugs 72DID Chain 27Dress shirt – Rotax 33Drive sprockets 70Driving Boots – MiR 29Driving gloves – Kartech 30-31Driving gloves – MiR 29Driving suits – MiR 29Driving vests 31Dunlop tyres 84EK badges 32EK Chain 27Edwards wheels 87Embroidered badges 32Endcaps – exhaust 55Engine Bag – MiR 29Engines & accessories 36-46Engines – Comer S-80 42-43Engines – Rotax 38-41Engines – Yamaha 44-45Engine bearings – Yamaha 47-48
Engine mounts & parts 49Engine mount inserts 49Engine parts – Kartech 46-48Engine parts – Yamaha 46-48Engine pressure test kit 80Exac-Toe alignment system 78Exhausts, muffl ers & parts 52-55Exhaust adapters – solid 53Exhaust bracket & fi ttings 52-55Exhaust endcaps 55Exhaust fl ex 53Exhaust fl ex adjusters 53Exhaust headers – Yamaha 47Exhaust header ring 53Exhaust springs & kits 54Extensions – stub axle 61Filters – air 8Filters – fuel 57Fitting kit – Rotax 125 Max 39Flex – exhaust 53Flex adjusters – exhaust 53Floortray washers & spacers 60Formula Rotax stickers 32Front end alignment plates 78Front end alignment - Exac-Toe 78Front end alignment - Sniper 77Fuel fi lters 57Fuel lines & fi ttings 56-57Fuel tanks & accessories 56-57Fuel tank straps 56Gauges – tyre 79Gauge – carb height level 80Gauges – carb pressure test 80Gauges – water temperature 79Gloves – MiR 29Grub screws – bearing 10Header ring – exhaust 53Heel rest 60Helmet bag – MiR 29Hubs – brake 20-21Hubs – sprocket 71Hubs – wheel 88-89
95
Ignition puller 81Insulation tape 80Jacket – Kartech 30Jacket – Rotax 33Kart chassis parts 58-59Kart chassis parts – universal 60-61Kart covers 62Kart stands & trolleys 62Kartech badges 32Kartech engine parts 46-48Kartech racing apparel 30-31Kartech jacket 30Kartech sprockets – axle 70Kartech sprockets – drive 70Karts – Arrow 6-7Keysteel 11King pins & bearings 61Location inserts – wheel 89Lubricants – chain 63Magnum tyres 85Master cylinder - brake 14Max-Torque clutches 28MiR apparel & products 29Mounting hardware – seat 68-69Muffl ers 54-55Muffl er tie wire 54Nassa panels & fi ttings 65Neck braces 31NGK badge 32NGK spark plugs 73Nosecones & fi ttings 64Numbers 76Number plates & clips 76Number plate adhesives 76Nuts 19Nuts – wheel 89Oil 63Overfl ow bottle – fuel 56Pedal studs & springs 60Plug leads 73Plug lead joiner 73
Powermac badge 32Powermac muffl ers 54-55Powermac Silencers 55Pressure test kit – carb 80Pressure test kit – engine 80Puller – ignition/clutch 81Puller – sprocket 81Race tape 80Racing apparel – Kartech 30-31Rainguard – carburettor 8Rolon Chain 27Rotax 125 Max fi tting kit 39Rotax 125 Max tools 39Rotax apparel 33Rotax badge 32Rotax cap 33Rotax carburettors & parts 24Rotax engines & parts 38-41Rotax jacket 33Rotax dress shirt 33Rotax muffl ers 55Rotax stickers 32Rotax windcheater 33Seats & parts 68-69Seat supports 60Shell Oil 63Shirt – Rotax 33Sidepods 66-67Sidepod bars – universal 66Smart Axle Tuners 11Sniper Alignment systems 77Solid exhaust adapters 53Spacers – stub axle 61Spark plugs & accessories 72-73Spark plug caps 72Spark plug leads 73Spark plug lead joiner 73Sports bag – Arrow 31Sports bag – MiR 29Springs – compression 23Springs – exhaust 54
Sprockets – drive & axle 70-71Sprocket holding tool 81Sprocket hubs 71Sprocket puller 81Stands & trolleys 62Steering shaft fi ttings 61Steering wheels & parts 74-75Steering wheels – Alfano 82Stickers 32Stickers – DPE 32Stickers – Bridgestone 32Stickers – Formula Rotax 32Stickers – Rotax 32Stub axle extensions 61Stub axle spacers 61Stop watch 79Studs – wheel 89Suits – MiR driving 29Supersprox badge 32Tachometers 79Tape – Kartech 80Tape – insulation 80Tape – cloth 80Throttle cables 22-23Throttle cable bracket 23Tie rods 61Tie rod ends 61Tie wire – muffl er 54Timing system - Alfano 82Tools 78-81Tools – Rotax 125 Max 39Trolleys & stands 62T-bar allen keys 81Tubeless valves 89Tyres 83-85Tyres – Bridgestone 84Tyres – Dunlop 85Tyres – Magnum 85Tyres – Vega 85Tyre changing tools 78Tyre gauges 79Valves – tubeless 89Vega tyres 85Vests 31Walbro carburettors & parts 25Washers 19Water temperature gauge 79Wet weather suits – MiR 29Wheels – alloy 86-87Wheels – Edwards 86-87Wheels – magnesium 86-87Wheel balancing weights 88Wheel bearings 88Wheel hubs & parts 88-89Wheel location inserts 89Wheel nuts 89Wheel studs 89Wheel washers 89Windcheater – Rotax 33Yamaha badge 32Yamaha engines 44-45Yamaha engine parts 46-48Yamaha exhaust headers 47
08/02
Notes…
96
Design & Artwork by Red Bolt Visual Communication Pty Ltd.
For all the latest products, details and specifications, visit the DPE web site at
www.dpeng.com.au
Drew Price Engineering is an Australian company
who have been specialising in the design and
manufacture of innovative, high quality karts and
karting components for almost thirty years. Our
products are backed up by a high level of customer
service and total support for our dealer network.
www.dpeng.com.au57-59 Nantilla Road, North Clayton, Victoria 3168 AustraliaPostal Address: PO Box 4105, Mulgrave, Victoria 3170 AustraliaPh: (03) 9545 3944 Fax: (03) 9545 3743 Email: [email protected](International, Ph: +61 3 9545 3944 Fax: +61 3 9545 3743)FreeCall Sales Fax No. (within Australia only) 1800 670 735