Page 1
Name Affiliation/Company Email
AA hamid, Nurul Nabihah Tokyo University of Science [email protected]
Abdin, Yasmine KU Leuven [email protected]
Abdulkarimova, Roza Institute of Combustion Problems [email protected]
Abot, Jandro The Catholic University of America [email protected]
Abrate, Serge Southern Illinois University
Achour Renault, Nadia Ensam [email protected]
Adali, Sarp University of KwaZulu-Natal [email protected]
Adam, Till Julian Institute of Aircraft Design and Lightweight Structures, Technische
Universität Braunschweig
[email protected]
ADAM, Laurent MSC Software Belgium [email protected]
Adumitroaie, Adi Johannes Kepler University Linz [email protected]
Advani, Suresh G. University of Delaware
Agarwal, Ankit Center for Infrastructure Engineering and Safety, School of Civil
and Environmental Engineering, University of New South Wales
[email protected]
Ageda, Daniel JEC Group [email protected]
Agogué, Romain ONERA
Ahamed, Jasim RMIT [email protected]
Ai, Qing univeristy of bristol [email protected]
Airinei, Anton Petru Poni Institute of Macromolecular Chemistry [email protected]
Aitomäki, Yvonne Luleå University of Technology [email protected]
Akamatsu, Mikio The University of Tokyo [email protected]
Akbarzadeh Shafaroudi,
Abdolhamid
Mechanical Engineering Department of McGill University [email protected]
Akermo, Malin KTH Royal Institute of Technology [email protected]
Aktas, Alper National Physical Laboratory [email protected]
Al Abadi, Haider La Trobe University [email protected]
Al Amri, Ghaithan KSU [email protected]
Alamry, Ali University of New South Wales [email protected]
Alexandre, Matthieu Vestas Wind Systems A/S [email protected]
ALEXOPOULOS, Nikolaos University of the Aegean [email protected]
Page 2
Name Affiliation/Company Email
Alfano, Giulio Brunel University - Dept of Mechanical, Aerospace and Civil
Engineering
[email protected]
Alhussein, Hussam Khalifa university [email protected]
Alipour, Nazanin Royal institute of technology (KTH) [email protected]
alkhader, Maen Stony brook university [email protected]
allaoui, Samir Orleans University [email protected]
Allegri, Giuliano Imperial College London [email protected]
Allen, Tom University of Auckland [email protected]
Allen, Robert University of Bristol [email protected]
Allen, Trevor University of Southampton [email protected]
Almeida, Sergio Lightweight Structures Laboratory - Instituto de Pesquisas
Tecnologicas
[email protected]
Almeida Junior, Jose Humberto Federal University of Rio Grande do Sul [email protected]
Alomari, Ahmed King Fahd University of Petroleum & Minerals [email protected]
Alshahrani, Hassan Concordia University [email protected]
Altan, M. Cengiz University of Oklahoma [email protected]
Alzebdeh, Khalid Sultan Qaboos University [email protected]
Amico, Sandro Federal University of Rio Grande do Sul [email protected]
Amiri, Ali North Dakota State University [email protected]
Ammasai Sengodan, Ganapathi Nanayang Technological University [email protected]
An, Qi University of Delaware [email protected]
Anders, Mark University of Southern California [email protected]
Andersen, Tom Løgstrup Technical University of Denmark [email protected]
Anderson, Mark Airbus UK
Andreasen, Jens Henrik Department of Mechanical and Manufacturing Engineering,
Aalborg University
[email protected]
Aniskevich, Andrey Institute of Polymer Mechanics, University of Latvia [email protected]
Anoshkin, Aleksandr Perm National Research Polytechnic University [email protected]
Ansari, Farhan KTH Royal Institute of Technology [email protected]
Anthony, David Imperial College London [email protected]
Antin, Kim-Niklas Aalto University [email protected]
Page 3
Name Affiliation/Company Email
Aoki, Takahira University of Tokyo
Arai, Takuya ADEKA Europe GmbH [email protected]
Arai, Masahiro Nagoya University [email protected]
Arakaki, Francisco K. EMBRAER S.A. [email protected]
Aratama, Shigeki Kawasaki Heavy Industries, Ltd.
ARGOUD, Nans VOLVO GTT [email protected]
Arhant, Mael Ifremer [email protected]
Armanios, Erian Univeristy of Texas Arlington [email protected]
Arrieta, Andres ETH Zurich [email protected]
Arvieu, Corinne Université de Bordeaux - I2M [email protected]
Asai, Satomi Goto laboratory, Department of Space Flight Systems, ISAS, JAXA [email protected]
Asano, Kazunori Kinki University [email protected]
Asare, Eric Queen Mary University of London SEMS Department [email protected]
Ashrafi, Behnam National Research Council Canada [email protected]
Askri, Ramzi University of Bordeaux [email protected]
Asp, Leif Swerea SICOMP [email protected]
Asprone, Domenico Dept. of Structures - University of Naples Federico II [email protected]
Atobe, Satoshi Tohoku University [email protected]
AUBARD, Xavier IRT Saint-Exupery [email protected]
Aubrion, Mathilde LM Wind Power [email protected]
Avgoulas, Evangelos Ioannis University of Cambridge [email protected]
Ayadi, Abderrahmane Department of Polymers and Composites Technology &
Mechanical Engineering
[email protected]
BBabeau, Arthur Ecole Centre de Nantes [email protected]
Bacarreza Nogales, Omar
Rodrigo
Imperial College London [email protected]
Bach, Daniela FORCE Technology [email protected]
Bacharoudis, Konstantinos Centre for Renewable Energy Sources and Saving [email protected]
Bachinger, Angelika Swerea SICOMP AB [email protected]
Bączek, Elżbieta The Institute of Advanced Manufacturing Technology [email protected]
Page 4
Name Affiliation/Company Email
Bae, Donghyun Yonsei University [email protected]
Baghaei, Behnaz University of Borås [email protected]
Bailey, Peter Instron [email protected]
BAILLEUL, Jean-Luc Nantes University - LTN [email protected]
Bak, Brian Aalborg universitet [email protected]
Baker, Anna University of Britsol [email protected]
Bakis, Charles Penn State University [email protected]
Balle, Frank University of Kaiserslautern, Institute of Materials Science and
Engineering
[email protected]
Bao, Yongjie Dalian University of Technology [email protected]
Baran, Ismet University of Twente, Faculty of Engineering Technology [email protected]
Barcelos Rocha, Iuri WMC Knowledge Centre [email protected]
Barfuss, Daniel ILK - TU Dresden [email protected]
Baril-Gosselin, Simon University of Ottawa [email protected]
Barnes, Rosemary UNSW [email protected]
Barroso, Alberto University of Seville [email protected]
Bartsch, Ivonne Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR) [email protected]
Barus, Matthias Ecole Nationale d'Ingénieurs de Tarbes (ENIT) [email protected]
Batalu, Dan Universitatea POLITEHNICA din Bucuresti/ Facultatea Stiinta si
Ingineria Materialelor
[email protected]
Bates, Simon University of Bristol [email protected]
Batra, Romesh Virginia Polytechnic Institute and State University [email protected]
Battley, Mark University of Auckland [email protected]
Bauer, Constantin Institute for Composite Materials
Baughman, Ray University of Texas at Dallas, NanoTech Institute [email protected]
Baur, Jeffery US Air Force/ Materials Lab
BAURIER, Hugues METRAVIB [email protected]
BAYDAR, Duygu Gulfem MIR ARAŞTIRMA VE GELİŞTİRME [email protected]
Bayraktar, Harun Albany Engineered Composites
Beauson, Justine DTU
Becker, David Institut fur Verbunwerkstoffe GmBH
BEGUINEL, Johanna Ingénierie des Matériaux Polymères @INSA Lyon (UMR 5223) [email protected]
Page 5
Name Affiliation/Company Email
BELAÏD, Marouane DRIVE - ISAT [email protected]
Belcher, Tony The Boeing Company [email protected]
BELEC, Lenaik Laboratoire Matériaux Polymère Interface Environnement Marin
(MAPIEM EA 4323), Université de Toulon
[email protected]
Bender, Jens Jakob Aalborg University [email protected]
BENELFELLAH, Abdelkibir Institut Pprime UPR 3346 – CNRS – ENSMA [email protected]
Bénéthuilière, Thibaut IMP@INSA [email protected]
Bensadoun, Farida KU Leuven - Departement of Materials Engineering [email protected]
Benter, Maike National Oilwell Varco Denmark I/S [email protected]
Berg, David Christian Clausthal UT, Department of Polymer Materials and Plastics
Engineering
[email protected]
Bergan, Andrew NASA Langley Research Center
BERGEROT, Alain Airbus Defence and Space [email protected]
Berggreen, Christian Technical University of Denmark [email protected]
Berggren, Pontus MTS Systems Norden AB [email protected]
Berglund, Lars KTH [email protected]
Berling, Phil MTS Systems Corporation [email protected]
Bernasconi, Andrea Politecnico di Milano [email protected]
BEYENE, Alem POLITECNICO DI TORINO - DIMEAS [email protected]
Bezerra, Renato Fraunhofer ICT [email protected]
Bezmelnitsyn, Alexander South Ural State University [email protected]
Bhat, Tanmay RMIT University [email protected]
BHATT, Ritesh Student [email protected]
Bian, Tianya Beijing University of Aeronautics and Astronautics [email protected]
Bickerton, Simon The University of Auckland [email protected]
Biel, Anders Technical University of Denmark [email protected]
Bielmeier, Christie University of Massachusetts Lowell [email protected]
Bilotti, Emiliano Queen Mary, University of London [email protected]
Birman, Victor Missouri University of Science and Technology [email protected]
Bisagni, Chiara Delft University of Technology [email protected]
Biskner, Adam LoadPath [email protected]
Bismarck, Alexander Imperial College London / University of Vienna [email protected]
Page 6
Name Affiliation/Company Email
BIZET, Laurent CNRS LOMC UMR6294 [email protected]
Björnsson, Andreas Linköping University [email protected]
Blacklock, Matthew RMIT University [email protected]
Blais, Maxime Ecole nationale supérieure des mines de Saint-Etienne [email protected]
BLAY, Francis MAKCLINZ SERVICES GH.LTD [email protected]
Blazquez, Antonio University of Seville [email protected]
blonder, Arielle Technion [email protected]
BOATENG, Edmond Osei MAKCLINZ SERVICES GH.LTD
Bobkov, Dmitrii JSC NPO Saturn [email protected]
Boczkal, Sonia Institute of Non-Ferrous Metals in Gliwice, Light Metals Division
Skawina
[email protected]
Bodaghi, Masoud University of Porto – Faculty of Engineering [email protected]
Bodjona, Kobye McGill University [email protected]
Bodkhe, Sampada Ecole Polytechnique de Montreal [email protected]
Bois, Christophe I2M - Université de Bordeaux [email protected]
Boothroyd, Stephen Durham University [email protected]
Boria, Simonetta University of Camerino [email protected]
Borstnar, Gregor University of Southampton [email protected]
Bosbach, Björn Technische Universität Hamburg-Harburg [email protected]
Bosia, Federico University of Torino [email protected]
Botsis, John Ecole polytechnique fédérale de Lausanne [email protected]
Bouslah, Mounia Ecole Centrale de Lyon [email protected]
Bovtun, Viktor Institute of Physics, Academy of Sciences of the Czech Republic [email protected]
Boyard, Nicolas CNRS / Laboratoire de Thermocinétique de Nantes [email protected]
Branner, Kim DTU Wind Energy [email protected]
Braun, Roman Fraunhofer IWES [email protected]
Breede, Arne Faserinstitut Bremen e.V. [email protected]
Breitzman, Timothy US Air Force Research Laboratory [email protected]
Brely, Lucas universita di torino
BREMER, Claus BCT GmbH [email protected]
Bremer, Jan BCT GmbH [email protected]
Brinchmann, Kristoffer DNV GL AS [email protected]
Page 7
Name Affiliation/Company Email
Brown, Nicholas TWI / University of Surrey
Bruck, Hugh University of Maryland [email protected]
Brunbauer, Julia Montanuniversitaet Leoben [email protected]
Brøndsted, Povl DTU Wind Energy [email protected]
Bull, Daniel University of Southampton [email protected]
Bullegas, Gianmaria Imperial College London [email protected]
Bullen, George Smart Blades, Inc
Burman, Magnus KTH [email protected]
Buruiana, Emil Constantin Petru Poni Institute of Macromolecular Chemistry [email protected]
Busuttil, Katerina Maney Publishing [email protected]
Butler, Richard University of Bath [email protected]
Büttemeyer, Holger Faserinstitut Bremen e.V. [email protected]
Böcking, Jan Universität Siegen [email protected]
Böttger, Toni UT Chemnitz [email protected]
CCAI, Hongneng School of Materials Science and Enginnering,Xi'an Jiaotong
University
[email protected]
Cairns, Douglas Montana State University [email protected]
Camanho, Pedro INEGI [email protected]
Canino, Marco Florida Atlantic University [email protected]
Cantwell, Wesley Khalifa University [email protected]
Caous, Damien I2M [email protected]
Carlone, Pierpaolo University of Salerno [email protected]
Caron Kardos, Jean-Frederik Bauer Hockey Corp.
Carraro, Paolo Andrea University of Padova [email protected]
Carrere, Nicolas LBMS/Ensta-Bretagne [email protected]
Cartledge, Andrew The University of Sheffield [email protected]
Carvelli, Valter Politecnico di Milano [email protected]
Casciati, Fabio University of Pavia [email protected]
Castro Ardila, Oscar Gerardo Denmark University of Techonology [email protected]
Cattarinuzzi, Emanuele Politecnico di Milano [email protected]
Page 8
Name Affiliation/Company Email
CATY, Olivier INP Bordeaux - Lab. LCTS [email protected]
Cazaux, Guillaume Laboratoire Ondes en Milieux Complexes UMR CNRS 6294-
Université du Havre
[email protected]
Cebeci, Hulya Istanbul Technical University [email protected]
Centea, Timotei University of Southern California [email protected]
Cerny, Miroslav Czech Technical University in Prague, Klokner Institute [email protected]
Chacko Salem, Stanley The University of Nottingham [email protected]
Challagulla, Krishna Bharti School of Engineering, Laurentian University [email protected]
Chaloupka, Alexander Fraunhofer Institute for Chemical Technology ICT branch [email protected]
Chambert, Martin Bauer Hockey Corp. [email protected]
Chandramouli, Seethalakshmi Katholieke University Leuven [email protected]
Chang, Fu-Kuo Stanford University
Chapelle, Lucie Department of Wind Energy, Section of Composites and Materials
Mechanics, Technical University of Denmark
[email protected]
Chappell, Fiona Melbourne Convention Bureau [email protected]
Charlier, Quentin IMP@INSA [email protected]
Chasiotis, Ioannis University of Illinois at Urbana-Champaign
Chattopadhyay, Aditi Arizona State University [email protected]
Chatzigeorgiou, George Arts et Métiers ParisTech [email protected]
Chawla, Nik Arizona State University [email protected]
Chehura, Edmon Cranfield University [email protected]
Chen, Menghao the University of Nottingham, UK
Chen, Junlin Beihang University [email protected]
Chen, Chao Beihang University [email protected]
Chen, Wei College of Energy and Power Engineering, Nanjing University of
Aeronautics and Astronautics
[email protected]
Chen, Daolun Department of Mechanical and Industrial Engineering, Ryerson
University
[email protected]
Chen, Yan Nanjing University of Aeronautics and Astronautics [email protected]
Chen, Xuelong Nanyang Technological University [email protected]
Chen, Wei Jen National Tsing Hua University [email protected]
Chen, Boyang National University of Singapore [email protected]
Page 9
Name Affiliation/Company Email
Chen, Wayne Purdue University [email protected]
CHEN, Xiuhua Shanghai Jiao Tong University [email protected]
Chen, Shuai The University of Nottingham [email protected]
Chen, Youming University of Auckland [email protected]
Chen, Yong University of California, Los Angeles [email protected]
CHEN, Haofeng University of Strathclyde [email protected]
Chen, Jieng-Chiang Vanung University [email protected]
Cheng, Mengge Beihang University
Cheng, Xiaoquan Beihang University [email protected]
Cheng, Kou-Pin Feng Chia University [email protected]
Cheng, Xinying The University of Sydney [email protected]
Chevalier, Jérémy Division of Materials and Processes (IMAP), Institute of
Mechanics, Materials and Civil Engineering (IMMC), Catholic
University of Louvain
[email protected]
Chiang, Chin-Lung Hungkuang University
Chiang, Fu-Pen Stony Brook University [email protected]
Chiang, Yu-Chun Yuan Ze University/Department of Mechanical Engineering [email protected]
Chizari, Kambiz Ecole Polytechnique de Montreal [email protected]
CHO, Donghwan Kumoh National Institute of Technology [email protected]
Christ, Mirko Faserinstitut Bremen e.V. [email protected]
Christke, Sandra Newcastle University
Chvojan, Jan University of West Bohemia, Regional Technological Institute [email protected]
Ciardiello, Raffaele Polytechnic University of Turin [email protected]
Cimini, Carlos UFMG [email protected]
Cinar, Kenan Namik Kemal University [email protected]
Claire, Guillebaud I2M-IMC [email protected]
Coburn, Broderick University of Bristol [email protected]
Coccon, Marco Nicolo Imperial College London [email protected]
Comba, Stefano versalis S.p.a. [email protected]
Conrado, Edoardo Politecnico di Milano - Dipartimento di Meccanica [email protected]
Coope, Tim University of Bristol [email protected]
Page 10
Name Affiliation/Company Email
Coppalle, Alexis CORIA [email protected]
Coppola, Anthony University of Illinois at Urbana-Champaign [email protected]
Coppola, Bartolomeo University of Salerno [email protected]
Correll, Nikolaus University of Colorado at Boulder [email protected]
Courteau-Godmaire, Hubert Polytechnique Montreal/CCHP [email protected]
cox, Brian teledyne [email protected]
Crammond, George University of Southampton [email protected]
Creighton, Claudia Institute for Frontier Materials (IFM), Deakin University [email protected]
Cruz Bernal, Camilo Andrés Robert Bosch GmbH [email protected]
Cui, Xiping Harbin Institute of Technology [email protected]
CUINAT-GUERRAZ, Nils McGill Univeristy [email protected]
Cullinan, Jack University of Bristol [email protected]
Cunningham, Paul Loughborough University [email protected]
Cyboron, Jolanta Institute of Advanced Manufacturing Technology [email protected]
Cysne Barbosa, Ana Paula Federal University of Rio Grande do Norte
Czel, Gergely University of Bristol [email protected]
DDaelemans, Lode Ghent University [email protected]
Daghia, Federica ENS Cachan [email protected]
Dai, Chengqin Harbin Institute of Technology, Center for Composite Materials
and Structures
Dalton, Brendan University of Ulster [email protected]
Damian, Celina Maria University Politehnica Bucharest, Advanced Polymer Materials
Group
[email protected]
Dang, Nguyen Hai NTU - Nanyang Technological University, Singapore [email protected]
Dangora, Lisa University of Massachusetts - Lowell [email protected]
Dano, Marie-Laure Université Laval [email protected]
Darracott, Will Composites Innovation Centre [email protected]
dau, Frederic I2M Institute / DUMAS Dept. [email protected]
DAVIES, Peter IFREMER [email protected]
DAVIES, Richard UNIVERSITY OF EXETER [email protected]
Page 11
Name Affiliation/Company Email
De Baere, Ives Ghent University, Department of Materials Science and
Engineering
[email protected]
de fazio, Piero ENEA - C.R. Trisaia [email protected]
de Kanter, Jens Airborne Oil & Gas
De Luca, Francois Imperial College London [email protected]
De Monte, Matthias Robert Bosch GmbH [email protected]
de nicola, Felice CIRA [email protected]
de Place, Jesper Brade Siemens Wind Power A/S [email protected]
De Silva, Karnika Product Accelerator, University of Auckland [email protected]
de Swart, Olaf Damen Shipyards [email protected]
Dean, Aamir Leibniz University of Hanover [email protected]
Dear, John Imperial College [email protected]
Dedieu, Cyril MPTC - GeM [email protected]
Degrieck, Joris Ghent University - Dept. of Materials Science and Engineering [email protected]
Del Solar, Alvaro Tufts University
DELIGIANNI, Aikaterini Ms. [email protected]
Delpino Gonzales, Orlando University of Southern California [email protected]
Deng, Yinhu Leibniz - Institut für Polymerforschung Dresden e.V. [email protected]
DERMANAKI FARAHANI,
Rouhollah
École de technologie supérieure [email protected]
Despringre, Nicolas ENSAM [email protected]
Dev, Siddharth University of Massachusetts Lowell [email protected]
Dezellus, Olivier University Lyon 1 [email protected]
Dhumal, Swapnil General Electric [email protected]
Di Fratta, Claudio ETH Zürich [email protected]
Di Modica, Pietro Newcastle University [email protected]
Diaz Rodriguez, Luis Antonio Nanomaterials and Nanotechnology Research Center CINN-CSIC-
UNIOVI-PA
[email protected]
Dicker, Michael University of Bristol [email protected]
Dieringa, Hajo Helmholtz-Zentrum Geesthacht [email protected]
Dlugosch, Michael Fraunhofer Ernst-Mach-Institute, EMI [email protected]
DOĞU, Mustafa MİR ARAŞTIRMA VE GELİŞTİRME A.Ş. [email protected]
Page 12
Name Affiliation/Company Email
doi, Taisei Advanced Course Student of Kobe City College of Technology [email protected]
Dolata, Anna Janina Silesian University of Technology [email protected]
Dolganina, Natalia South Ural State University [email protected]
Domínguez, Juan Carlos Chemical Engineering Department. Complutense University of
Madrid
[email protected]
Donaldson, Kelly MTS Systems GmbH [email protected]
Dong, Gaofeng Beihang University [email protected]
Dong, Anqi Concordia University [email protected]
Donough, Matthew RMIT University [email protected]
Drapier, Sylvain Ecole des Mines Saint-Etienne [email protected]
DRISSI-HABTI, Monssef IFSTTAR [email protected]
Drolet, Nicolas Saint-Gobain (NRDC) [email protected]
Du, Shanyi Harbin Institute of Technology [email protected]
DUFORT, Laurent ESI Group [email protected]
Duhovic, Miro Institut für Verbundwerkstoffe GmbH
Dulieu-Barton, Janice University of Southampton [email protected]
Dumarquez, Sandrine JEC Group [email protected]
Dumont, Pierre 3SR
Duplessis Kergomard, Yann ESI GROUP [email protected]
Dyzia, Maciej Silesian University of Technology [email protected]
Dzalto, Jovana Institute for Composite Materials
Dörsch, Christian Fraunhofer IWES [email protected]
EEaton, Mark Cardiff University [email protected]
Eberl, Ludwig Institute for Carbon Composites (LCC), Technische Universitaet
Muenchen
[email protected]
Echtermeyer, Andreas Theme Coordinator [email protected]
Edwards, Laura University of Bristol [email protected]
Eichenhofer, Martin ETH Zurich
Eichhorn, Stephen University of Exeter [email protected]
Ekermann, Tomas KTH Royal Institute of Technology [email protected]
El Azzouzi, Khalid IRT Jules Verne [email protected]
Page 13
Name Affiliation/Company Email
EL MOUSSAID, Mohammed University of Bordeaux [email protected]
El Safty, Adel University of North Florida [email protected]
El Said, Bassam University of Bristol [email protected]
El Yagoubi, Jalal ARTS - AQUITAINE [email protected]
Eliseeva, Tatiana Aalto University
El-Saikaly, Georges PhD candidate, Dept. of Construction Engineering, University of
Quebec, École de Technologie Supérieure (ÉTS)
[email protected]
Endruweit, Andreas University of Nottingham [email protected]
Erland, Samuel University of Bath [email protected]
Ermanni, Paolo ETH Zurich [email protected]
Erxleben, Björn Shimadzu Europa GmbH [email protected]
Evans, Simon Airbus Group Innovations
Evans, Anthony University of Nottingham
Everitt, Daniel University of Bristol [email protected]
Eyer, Gabriel Laboratoire de Mecanique et d'Acoustique [email protected]
FFabre, Victor Hutchinson SA [email protected]
Fagerström, Martin Chalmers University of Technology; Dept. Applied Mechanics [email protected]
Fagiano, Christian Onera, The French Aerospace Lab [email protected]
Fahr, Philipp Technische Universität München, Institute for Carbon Composites [email protected]
Falkenberg, Paul Technische Universität Braunschweig - Institut für
Konstruktionstechnik
[email protected]
Falzon, Brian Queen's University Belfast [email protected]
Fan, Genlian Shanghai Jiao Tong University [email protected]
Fan, Tongxiang Shanghai Jiaotong University, State Key Lab of Metal Matrix
Composites
[email protected]
Fang, Guodong Univeristy of Bristol [email protected]
Farshidi, Arash Technical University of Denmark, Department of Mechanical
Engineering
[email protected]
Fauster, Ewald Montanuniversität Leoben
Page 14
Name Affiliation/Company Email
Fedulov, Boris Skolkovo Institute of Science and Technology [email protected]
Feih, Stefanie Singapore Institute of Manufacturing Technology [email protected]
Feissel, Pierre Roberval - UTC [email protected]
Feito Sánchez, Norberto Universidad Carlos III de Madrid [email protected]
Fengrui, Liu School of Astronautics, Beihang University [email protected]
Fernandes, Jason Toyota Motor Europe [email protected]
Fernandez Villegas, Irene Delft University of Technology [email protected]
Fernberg, Patrik Swerea SICOMP [email protected]
Fernlund, Göran The University of British Columbia [email protected]
Ferré Sentis, Dimitri CNRS, Lab. 3SR, F-38000 Grenoble, France [email protected]
Fetfatsidis, Konstantine Aurora Flight Sciences [email protected]
Fideu, Paulin Airbus Operations GmbH
Fiedler, Bodo Technical University Hamburg-Harburg [email protected]
Fiore, Vincenzo University of Palermo
Fischer, Guillaume Airbus Group Innovations [email protected]
Fleck, Frank Continental Reifen Deutschland GmbH [email protected]
Fletcher, Timothy University of Bath [email protected]
Fliegener, Sascha Fraunhofer Institute for Mechanics of Materials IWM [email protected]
Fonteyn, Sander Vrije Universiteit Brussel [email protected]
Fortea Verdejo, Marta Universität Wien [email protected]
Fourel, Julie Chomarat
Fox, Bronwyn Deakin University [email protected]
FRANCESCHI, Sophie CNRS-LABORATOIRE IMRCP [email protected]
Francois-Xavier, Kromm CNRS - Université de Bordeaux [email protected]
Frenzel, Ray Experimental Physics 2, University of Augsburg [email protected]
Fridman, Ioulia IMI
Fritsch, Jens Fraunhofer Institut EMI [email protected]
Frossard, Guillaume Ecole Polytechnique Fédérale de Lausanne (EPFL) [email protected]
Fu, Qiliang KTH [email protected]
Fu, Yucan Nanjing University of Aeronautics and Astronautics [email protected]
Fuellbrandt, Marieke Technische Universität Berlin [email protected]
Fuentes, Carlos KU Leuven [email protected]
Fujii, Tomoyuki Shizuoka University [email protected]
Page 15
Name Affiliation/Company Email
Fukui, Hayato Tokyo University of Science [email protected]
Fuller, Jonathan University of Bristol [email protected]
Furedi Milhofer, Helga the Hebrew University of Jerusalem (retired) [email protected]
GGaitonde, Martin AIRBUS [email protected]
Gaitzsch, Robert Faserinstitut Bremen e.V. [email protected]
Galan-Marin, Carmen Universidad de Sevilla [email protected]
Galkin, Siegfried KIT - Institute of Vehicle System Technology [email protected]
Galland, Griselda Universidade Federal do Rio Grande do Sul/Instituto de Química [email protected]
Galos, Joel University of Cambridge [email protected]
Gamstedt, Kristofer Uppsala University [email protected]
Gans, Adam Bauer Performance Sports [email protected]
GAO, Hang Dalian University of Technology
Gao, Qi Huazhong University of Science and Technology [email protected]
Garcea, Serafina Consuelo University of Southampton [email protected]
Garcia, Vanessa FIDAMC [email protected]
Garcia, Victor UCH CEU [email protected]
Garza, Carlos University of Bristol [email protected]
Gasior, Pawel Wroclaw University of Technology [email protected]
Gautam, Mayank University of Manchester [email protected]
Gawish, Samiha National Reserach Center ,Textile Division,Dokki,Cairo, Egypt [email protected]
GE, Yangyang Institut Clément Ader (ICA); IUT Tarbes de l'Université Toulouse
III, Dépt. GMP
[email protected]
GE, Dongyun Tsinghua University [email protected]
George, Andrew Brigham Young University [email protected]
Georges, Frank-David Hamburg University of Applied Sciences [email protected]
Georgiou, Ioannis National Technical University of Athens [email protected]
Gereke, Thomas Technische Universität Dresden, Institute of Textile Machinery
and High Performance Material Technology
[email protected]
Gersborg, Allan R LM Wind Power [email protected]
Geubelle, Philippe University of Illinois [email protected]
Page 16
Name Affiliation/Company Email
Ghaffarimejlej, Vahid Technische Universität Braunschweig - institut für
Konstruktionstechnik
[email protected]
Ghazali, Habibah University of Sydney [email protected]
GHITA, Oana UNIVERSITY OF EXETER [email protected]
Ghose, Sayata The Boeing Company [email protected]
Ghosh, Somnath Johns Hopkins University [email protected]
Gibson, Geoff Newcastle University [email protected]
Gigliotti, Luigi Imperial College London [email protected]
Gilman, Jeffrey NIST [email protected]
girardot, Jeremie I2M Institute / DUMAS Dept. [email protected]
Gizik, Daniel Airbus Group Innovations [email protected]
Glud, Jens Aalborg University [email protected]
Goethals, Frederik Centexbel [email protected]
GOMEZ-FATOU, Marian CSIC Institute of Polymer Science and Technology [email protected]
Gong, Yu Beihang University [email protected]
Gong, Xiaojing Lab. ICA, IUT Tarbes, University Toulouse III, France [email protected]
Gonzalez, Carlos Universidad Politécnica Madrid [email protected]
Gonzalez, Emilio V. Universitat de Girona [email protected]
González-Cantero, Juan
Manuel
FIDAMC and University of Seville [email protected]
GOO, Nam Seo KONKUK UNIVERSITY [email protected]
Gorbatikh, Larissa KU Leuven [email protected]
Gordnian, Kamyar The University of British Columbia [email protected]
Gorrasi, Giuliana Department of Industrial Engineering-University of Salerno-
Gortner, Florian Institut für Verbundwerkstoffe
Goto, Ken Institute of Space and Astronautical Science, JAXA [email protected]
Goto, Keita Nagoya University [email protected]
Gouldstone, Christopher N12 Technologies, Inc [email protected]
Gower, Michael National Physical Laboratory [email protected]
Grail, Gael Imperial College London [email protected]
Grammatikos, Sotirios University of Bath [email protected]
Graupner, Dr.-Ing. Nina Bremen University of Applied Sciences [email protected]
Page 17
Name Affiliation/Company Email
Grave, Jon Harald Lambert Norwegian University of Science and Technology [email protected]
Greenhalgh, Emile Imperial College London [email protected]
Greisel, Michael University of Augsburg, Institute of Physics [email protected]
Grieser, Timo IVW GmbH
Grigoriou, Katherine RMIT University [email protected]
Groh, Fabian German Aerospace Center - Institute of Composite Structures and
Adaptive Systems
[email protected]
Groh, Rainer University of Bristol [email protected]
Grohmann, Yannis German Aerospace Center (DLR e.V.) [email protected]
Grohmann, Steffi Istitute for Bioprocessing and Analytical measurements (iba) [email protected]
Guan, Zhongwei University of Liverpool [email protected]
Guglhoer, Thomas University of Augsburg [email protected]
Guo, Licheng Harbin Institute of Technology [email protected]
Gurdal, Zafer University of South Carolina, McNAIR Center
Gurnagul, Norayr FPInnovations [email protected]
Guruprasad, P. J. Indian Institute of Technology Bombay [email protected]
Gustafsson, Tord BLATRADEN AB [email protected]
Guzman de Villoria, Roberto IMDEA Materiales [email protected]
Gürkan, Idris İstanbul Technical University [email protected]
HHaase, Nino University of Augsburg [email protected]
Hadjiloizi, Demetra Cyprus University of Technology [email protected]
Haeske, Marcel Institut fuer Textiltechnik (ITA) of RWTH Aachen University [email protected]
Haghi Kashani, Masoud University of British Columbia [email protected]
Hagnell, Mathilda KTH, Royal Institute of Technology [email protected]
Hajdaei, Amirhossein Element Materials Technology [email protected]
Hajian, Alireza KTH Royal Institute of Technology [email protected]
Hakansson, Eva Center for Novel High Voltage/Temperature Materials and
Structures, University of Denver, Denver, United States
[email protected]
Page 18
Name Affiliation/Company Email
Hallander, Per Saab AB [email protected]
Hallett, Steve University of Bristol [email protected]
HALLONET, Anne LGCIE Bohr - University Claude Bernard Lyon 1 [email protected]
Hallström, Stefan KTH Royal Institute of Technology
HAMAMOTO, Akira The University of Tokyo [email protected]
Hamed, Ehab University of New South Wales [email protected]
Hamila, Nahiene INSA Lyon [email protected]
Hamilton, Andrew Queen's University Belfast
Han, Geng Beihang University [email protected]
Han, Jae-Hung KAIST [email protected]
Han, Sungjin Seoul national university [email protected]
Hannemann, Benedikt Institute for Composite Materials (IVW GmbH)
Hans, Thorsten Institute for Carbon Composites [email protected]
Hansen, Peter Element Materials Technology Hitchin [email protected]
Hansen, Reinack Nanyang Technological University [email protected]
Hansen, Christopher University of Massachusetts Lowell [email protected]
Hao, Yong Shenyang Engine Design & Research Institute
Hao, Lifeng Harbin Institute of Technology, Center for Composite Materials
and Structures
[email protected]
Hao, Bin Xinjiang Technical Institute of Physics and Chemistry [email protected]
HAOJIE, Yue SHANGHAI AIRCRAFT MANUFACTURING CO.,LTD. [email protected]
HARA, Eiichi Japan Aerospace Exploration Agency
Harmandaris, Vagelis Institute of Applied and Computational Mathematics, Foundation
for Research and Technology - Hellas
[email protected]
Harper, Lee The University of Nottingham
Hartl, Stefan Vienna University of Technology [email protected]
Hasanbasic, Mirnes Shimadzu Europa GmbH [email protected]
HASEGAWA, Tadashi SHIMADZU CORPORATION [email protected]
Haselbach, Philipp DTU Wind Energy [email protected]
Hatta, Hiroshi Japan Aerospace Exploration agency [email protected]
Haug, Simon Univesity Augsburg [email protected]
Hausmann, Joachim Institut fuer Verbundwerkstoffe GmbH
Hawley, Martin Michigan State University [email protected]
Page 19
Name Affiliation/Company Email
Hayashi, Satoshi Kanazawa Institute of Technology [email protected]
HAYASHI, Takahiro The University of Tokyo, Department of Systems Innovation [email protected]
Hayman, Brian Theme Coordinator ICCM / University of Oslo [email protected]
Hazzard, Mark University of Bristol [email protected]
He, Lihua Beijing Institute of Aeronautical Materials [email protected]
He, Xiaoqiao City University of Hong Kong [email protected]
He, Shengjun Sinopec [email protected]
Heath, Callum University of Bristol [email protected]
Heil, Joseph University of Nottingham
Heinecke, Falk German Aerospace Center/Institute of Composite Structures and
Adaptive Systems
[email protected]
Hekner, Bartosz Silesian University of Technology [email protected]
Helbig, Frank Technische Universität Chemnitz [email protected]
Helenon, Fabrice HBM United Kingdom Ltd
Helmus, Rhena Technische Universität München [email protected]
Hendrickx, Kevin KU Leuven [email protected]
Henriksen, Jens FORCE Technology [email protected]
Henriksson, Fredrik Linköping University [email protected]
Henry, Eric Autodesk [email protected]
Hermsdorf, Florian Universität der Bundeswehr München [email protected]
Herrera, Steven University of California Riverside [email protected]
Herwan, Jonny Tokyo Metropolitan University [email protected]
Herwig, Tillmann Karlsruhe Institute of Technologie/Institute for Structural Analysis [email protected]
Hesse, Simon BMW AG. & Technische Universität München
Heuer, Henning Fraunhofer IKTS Dresden [email protected]
Hilton, Harry University of Illinois at Urbana-Champaign [email protected]
Hine, Peter University of Leeds [email protected]
Hinterhölzl, Roland Technische Universität München, Institute for Carbon Composites [email protected]
Hinton, Michael High Value Manufacturing Catapult
Hira, Hirohito Daido university [email protected]
Page 20
Name Affiliation/Company Email
Hirano, Yoshiyasu Japan Aerospace Exploration Agency
Hirashima, Tei JSOL Corporation [email protected]
Hoa, Suong Concordia University [email protected]
Hoang, Minh Duc Concordia University [email protected]
Hobeck, Jared University of Michigan [email protected]
Hochard, Christian LMA CNRS - Aix-Marseille University [email protected]
Hoefnagels, Johan Eindhoven University of Technology [email protected]
Hoffman, Joe University Of Denver [email protected]
Hoffmann, Marco Airbus Group Innovations [email protected]
Hojo, Masaki Dept. Mechanical Engineering and Science, Kyoto University [email protected]
Hokura, Atsushi Kanazawa Institute of Technology [email protected]
Holschuh, René BASF SE [email protected]
Hong, Seung-Chan LANL-CBNU Engineering Institute Korea and Department of
Mechatronics Engineering in Chonbuk National University
Hong, Bin Harbin Institute of Technology [email protected]
Hong, Changqing Harbin Institute of Technology [email protected]
Hong, Soon Man Korea Institute of Science and Technology [email protected]
Hongliang, Yuan National University of Defense Technology [email protected]
Hoo Fatt, Michelle Univ of Akron [email protected]
Horn, Bernhard Institute for Carbon Composites / TU München [email protected]
Hornblow, Benjamin FORCE Technology [email protected]
Horoschenkoff, Alexander Munich University of Applied Sciences [email protected]
Horst, Peter TU Braunschweig, Inst. of Aircraft Design and Lightweight
Structures
[email protected]
Hosoi, Atsushi Waseda University [email protected]
Hosur, Mahesh Tuskegee University [email protected]
Hoydonckx, Hans Transfurans Chemicals
Hsiao, Hung Yi Industrial Technology Research Institute [email protected]
Hu, Jiandong Jilin University [email protected]
Hu, Lingling Sun Yat-sen University [email protected]
Huang, Sam H. SUNY at Stony Brook
Page 21
Name Affiliation/Company Email
Huang, Farong East China University of Science & Technology [email protected]
HUANG, Lujun Harbin Institute of Technology [email protected]
Huang, Xicheng Institute of Systems Engineering, China Academy of Engineering
Physics
[email protected]
HUANG, Shaojuan Laboratoire Roberval, Université de Technologie de Compiègne [email protected]
HUANG, Ruoxuan Nanyang Technological University [email protected]
Huang, Zheng-Ming Tongji University [email protected]
Huang, Guoliang UMC [email protected]
Hubert, Pascal McGill University [email protected]
Huchette, Cédric ONERA the French Aerospace Lab
Huelsbusch, Daniel TU Dortmund University [email protected]
HUH, Young Cheol Korea Institute of Machinery and Materials [email protected]
Hultberg, Anton TPO
Humeau, Corentin Ifremer [email protected]
Hung, Yu-Chen (Owen) Hexcel Composites Ltd. [email protected]
Huong, Ling Hung Osram Opto Semiconductor Sdn. Bhd. [email protected]
Hwang, Hui Yun Andong National University [email protected]
Hvejsel, Christian Frier Siemens Wind Power A/S [email protected]
Hübler, Moritz Institute for Composite Materials
Hümbert, Martina Institut für Verbundwerkstoffe GmbH
HYODO, Takehiko SUMITOMO RUBBER INDUSTRIES,LTD [email protected]
Hörberg, Erik Saab AB [email protected]
Hörrmann, Susanne Johannes Kepler Universität Linz [email protected]
IIarve, Endel UDRI [email protected]
Ibañez, Manuel CEU Cardenal Herrera University [email protected]
Ibarretxe, Joana LEARTIKER (Lea-Artibai Ikastetxea S.Coop) / University of the
Basque Country (UPV)
[email protected]
Ichikawa, Daiki Kyoto Institute of Technology [email protected]
Idapalapati, Sridhar Nanyang Technological University [email protected]
Ihle, Alexander European Space Agency [email protected]
Ihrner, Niklas Royal Institute of Technology
Page 22
Name Affiliation/Company Email
Ikenobo, Yuki Ikenobo Headquarter [email protected]
Incarnato, Loredana Dept of Industrial Engineering-University of Salerno-
Inman, Daniel J. University of Michigan [email protected]
Irisarri, François-Xavier ONERA
Ishida, Osuke Kanazawa Institute of Technology [email protected]
Ishikawa, Takashi Professor, Nagoya University [email protected]
Islam, Mohammad Rafiqul Vocational Education Consulting [email protected]
Itakura, Daisuke TOYOBO CO., LTD.
Ivanov, Dmitry University of Bristol [email protected]
Ivens, Jan KU Leuven [email protected]
JJacobs, Koen FLIR Systems [email protected]
Jacquemin, Frédéric Université de Nantes [email protected]
Jain, Atul KU Leuven [email protected]
Jainatul, Jainatul KU Leuven [email protected]
Jakobsen, Johnny Aalborg University [email protected]
Jakubinek, Michael National Research Council Canada [email protected]
Jalalvand, Meisam University of Bristol [email protected]
Jannink, Martijn Siemens Wind Power A/S [email protected]
Jarzynka, Patryk Advanced Composite Centre for Innovation and Science
(University of Bristol)
[email protected]
Jeancolas, Antoine Pole de Plasturgie de l’Est [email protected]
Jeelani, Shaik Tuskegee University [email protected]
Jeliazkov, Momchil IMDEA Materials [email protected]
Jenkins, Peter University of Strathclyde [email protected]
Jennings, Matt Carbon Nexus, Deakin University [email protected]
Jensen, David Brigham Young University [email protected]
Jensen, Lars Rosgaard Department of Mechanical and Manufacturing Engineering,
Aalborg University
[email protected]
Jerabek, Michael Borealis Polyolefine GmbH
jespersen, Simon DOW Europe GmbH
Jespersen, Kristine Munk Technical University of Denmark (DTU) [email protected]
Jesson, David University of Surrey [email protected]
Page 23
Name Affiliation/Company Email
Jevons, Matt FERCHAU Engineering [email protected]
Ji, Zhaojie School of Aeronautic Science and Engineering, Beihang University,
Beijing, China
[email protected]
jia, Li AVIC composite Co.ltd [email protected]
Jia, Xiaolong Beijing University of Chemical Technology; Changzhou Institute of
Advanced Materials
[email protected]
jia, Jingjing HKUST [email protected]
Jia, Yongzhen Huazhong University of Science and Technology [email protected]
Jiang, Dazhi Department of Materials Science and Engineering, National
University of Defense Technology
[email protected]
Jiang, Cai Department of Materials Science and Engineering, National
University of Defense Technology
[email protected]
Jiang, Ning Tongji University, China [email protected]
Jianwei, Mao State Key Laboratory of Metal Matrix Composites, Shanghai Jiao
Tong
[email protected]
Jiao, Jian AVIC Composites Center
Jiao, Xingjian National Key Laboratory of Advanced Function Composite
Materials
[email protected]
jie, Wang Tongji University [email protected]
Jimenez, Mateo Universidad de los Andes [email protected]
JIMENEZ-MELENDO, Manuel UNVERSIDAD DE SEVILLA [email protected]
Jin, Seung-Bo Korea Aerospace Research Institute [email protected]
Jin, Chuchu Sinopec [email protected]
Jing, Xin Beihang University [email protected]
Jishi, Hassan Khalifa University [email protected]
Jochum, Christian ENSTA Bretagne [email protected]
Joffe, Roberts Lulea University of Technology [email protected]
Johannisson, Wilhelm KTH Aeronautical & Vehicle Engineering [email protected]
John, Marianne Fraunhofer IWM
John, Maya CSIR [email protected]
Johnson, Michael University of Nottingham [email protected]
Johnston, Joel Arizona State University
Page 24
Name Affiliation/Company Email
Johnston, Allison Syracuse University [email protected]
JOLIFF, Yoann MAPIEM - SeaTech [email protected]
Jones, Eric AFRL [email protected]
Jones, Frank University of Sheffield [email protected]
Jonnalagadda,
Yellavenkatasunil
Siemens Energy, inc. [email protected]
Joo, James US Air Force Research Laboratory [email protected]
Joshi, Prabij Tokyo Metropolitan University [email protected]
Just, Gordon TU Dresden, ILK [email protected]
Jürgens, Michael Airbus Group [email protected]
Jörgensen, Martin Heide Aalborg University [email protected]
Jørgensen, Jens Grandjean Siemens Wind Power A/S [email protected]
KKaboglu, Cihan Imperial College London [email protected]
Kaddour, Sam QinetiQ [email protected]
Kadlec, Martin Vyzkumny a zkusebni letecky ustav, a.s. [email protected]
Kageyama, Kazuro The University of Tokyo [email protected]
Kaka, Diyar University of Sheffield [email protected]
Kako, Jan Christoph Airbus Operations GmbH [email protected]
Kalnins, Kaspars Riga Technical University [email protected]
Kaminski, Myriam ONERA The French Aerospace Lab [email protected]
Kammerhofer, Philipp Technische Universität München / Institute for Carbon
Composites
Kanerva, Mikko Aalto University [email protected]
Kang, Renke Dalian University of Technology
Kang, Donghoon Korea Railroad Research Institute [email protected]
Kantor, Mark skoltech [email protected]
Karatzas, Vasileios Technical University of Denmark [email protected]
Kardomateas, George Georgia Institute of Technology [email protected]
KASALA, Jozef Alexander Dubcek University of Trencin in Trencin [email protected]
Katunin, Andrzej Silesian University of Technology [email protected]
Kaufmann, Joerg Technische Universität Chemnitz [email protected]
Kawai, Masamichi University of Tsukuba [email protected]
Page 25
Name Affiliation/Company Email
Kawashita, Luiz University of Bristol [email protected]
Kayran, Altan Middle East Technical University, Department of Aerospace Eng. [email protected]
Kazanci, Zafer Turkish Air Force Academy [email protected]
Keating, Elspeth University of Warwick [email protected]
Kehrer, Maria Loredana Karlsruhe Institute of Technology [email protected]
Keller, Andre FHNW [email protected]
Kelly, Piaras University of Auckland [email protected]
Kepler, Jørgen Aalborg University [email protected]
Kessler, Eduard NuCellSys GmbH, Kirchheim u. Teck, Germany
Khaleque, Tasnuva Imperial College London [email protected]
Khan, Mohammad Asgar Concordia University [email protected]
Kharshiduzzaman, Md Politecnico di Milano [email protected]
Khechen, Aris Laval University [email protected]
Khurukijwanich, Chaiwat King Mongkut's University of Technology Thonburi [email protected]
Kieffer, John University of Michigan [email protected]
kikuchi, Tetsuo toyugiken co., ltd. [email protected]
Kim, Seong Yun Korea Institute of Sicence and Technology (KIST)
Kim, Taesung Waseda University
Kim, Gyuhye ANDONG National University [email protected]
Kim, In-Gul Chungnam National University [email protected]
Kim, S. H. GIFT, POSTECH [email protected]
Kim, Moo Sun Korea Railroad Research Institute [email protected]
Kim, Yujin Seoul national university [email protected]
Kim, Jae Kwan Seoul National University [email protected]
Kim, Sumin Soongsil University [email protected]
KIM, Jang-Kyo The Hong Kong University of Science and Technology [email protected]
Kim, Alicia H University of Bath [email protected]
Kim, Byung Chul University of Bristol [email protected]
Kim, Hyonny University of California San Diego [email protected]
Kim, Daniel University of Southern California [email protected]
Kim, Kyuho Yonsei university [email protected]
Kimura, Teruo Kyoto Institute of Technology [email protected]
Page 26
Name Affiliation/Company Email
Kinloch, Ian University of Manchester [email protected]
Kisailus, David University of California [email protected]
Kishi, Hajime University of Hyogo [email protected]
Kitai, Keisuke KITAI SEISAKUSYO CO., LTD [email protected]
Kitamura, Masayuki Hokuriku Fiber Glass co.,ltd
Klaerner, Matthias Technische Universität Chemnitz [email protected]
Kleemann, Sebastian Technische Universität Braunschweig [email protected]
Klein, Markus GOM mbH [email protected]
Knudsen, Eric Søndergaard Siemens Wind Power A/S [email protected]
Kobayashi, Masatoshi Department 3, Advanced Research Division / Honda R&D Co., Ltd.
Kobayashi, Satoshi Tokyo Metropolitan University [email protected]
Koerber, Hannes Technische Universität München, Institute for Carbon Composites [email protected]
Kogo, Yasuo Tokyo University of Science [email protected]
KOICHI, Yasuhiro Kanazawa Institute of Technology [email protected]
Kojo, Eisuke Tokyo University of Science, Department of Material Science and
Technology, Faculty of Industrial Science and Technology
[email protected]
Kok, Thijs ThermoPlastic composites Research Center [email protected]
Konagaya, Shigeji Nagoya university [email protected]
Kondo, Atsushi Tokyo Metropolitan University [email protected]
Kondor, Anett Surface Measurement Systems Ltd. [email protected]
Kong, Weiyi University of Nottingham [email protected]
KONSTANTAKOPOULOU, Maria NEWCASTLE UNIVERSITY [email protected]
Kontturi, Eero Aalto University [email protected]
Kontturi, Katri Imperial College London [email protected]
Korkees, Feras Swansea University
Korotygin, Artem NPO Saturn [email protected]
Kosaka, Tatsuro Kochi University of Technology [email protected]
Kose, Kim inpro [email protected]
Page 27
Name Affiliation/Company Email
KOSTAGIANNAKOPOULOU,
Christina
Applied Mechanics Laboratory, University of Patras [email protected]
Kousiatza, Charoula University of Piraeus [email protected]
Koussios, Sotiris Delft University of Technology [email protected]
Koutras, Nikos Tu Delft [email protected]
Koutsomitopoulou, Anastasia University of Bristol [email protected]
Koyama, Masashi Meisei university [email protected]
Krajnc Alves, Marcelo Universidade Federal de Santa Catarina [email protected]
Krasnikovs, Andrejs Riga Technical Univeristy [email protected]
Krasnobrizha, Alina Ecole Centrale de Nantes [email protected]
Kratz, James University of Bristol [email protected]
Krause, Daniel German Aerospace Center (DLR) [email protected]
Kreling, Stefan Institute of joining and welding, TU Braunschweig [email protected]
Křížek, Michal University of West Bohemia,Regional Technological Institute [email protected]
Krooß, Tim Institut für Verbundwerkstoffe GmbH
Krumenacker, Nicolas McGill University
Kruse, Thomas Airbus Operations GmbH [email protected]
Kubouchi, Masatoshi Dept. Chem. Eng., Tokyo Institute of Technology [email protected]
Kudva, Jayanth NextGen Aeronautics, Inc. [email protected]
Kukla, Christian Fraunhofer Institute for Production Technology IPT
Kulakov, Vladimir Institute of Polymer Mechanics, University of Latvia [email protected]
Kumar, Vipin The University of Tokyo [email protected]
Kunkel, Christina TU Darmstadt [email protected]
Kunzmann, Christina Physik - Universität Augsburg
Kuraishi, Akira Kawasaki Heavy Industries, Ltd.
Kuratani, Yasunari Kyoto Institute of Technology [email protected]
Kurita, Hiroki CEA Saclay, DEN/DANS/DMN/SRMA/LTMEx [email protected]
Kusano, Hideaki Shimadzu Corporation
Kwon, Dong-Jun Gyeongsang National University [email protected]
LLabans, Edgars Riga Technical University [email protected]
Page 28
Name Affiliation/Company Email
Lacy, Gordon National Research Council Canada [email protected]
Ladani, Raj Sir Lawrence Wackett Aerospace Research Centre, RMIT
University
[email protected]
Ladeveze, Pierre ENS Cachan [email protected]
Laeuffer, Hortense I2M [email protected]
Lagace, Paul Massachusetts Institute of Technology [email protected]
Lagardere, Mylene Mines Douai [email protected]
Lagoutte, Cécile JEC Group [email protected]
Lahuerta Calahorra, Francisco Knowledge Centre WMC [email protected]
Laine, Eric Institute Pprime - DPMM/ED [email protected]
Lamberti, Alfredo VUB [email protected]
Lammens, Nicolas UGent [email protected]
Lamon, Jacques LMT (CNRS-ENS CACHAN) [email protected]
Landry, Benoit McGill University [email protected]
Lani, Frédéric Université catholique de Louvain [email protected]
Larsen, R. Mikael Department of Mechanical and Manufacturing Engineering,
Aalborg University
[email protected]
Laskowski, Jessica German Aerospace Center (DLR) [email protected]
Lau, Alan K.T. The Hong Kong Polytechnic University [email protected]
Lauer, Andreas Schunk Kohlenstofftechnik GmbH
Lauke, Bernd IPF Dresden [email protected]
Laurenzi, Susanna Sapienza Università di Roma [email protected]
Laursen, Jeppe H Zebicon A/S [email protected]
Laustsen, Steffen Siemens Wind Power A/S [email protected]
Lauter, Christian University of Paderborn, Automotive Lightweight Construction
(LiA)
[email protected]
Lawrence, Charlie Maney Publishing [email protected]
Le Cahain, Yann University of Bristol, ACCIS [email protected]
LE MEUR, Kévin INSA Lyon [email protected]
Leal, Andres Empa
Lee, Huen KAIST
Lee, Jung-Ryul Korea Advanced Institute of Science and Technology
Page 29
Name Affiliation/Company Email
Lee, B.-L. ("Les") Air Force Office of Scientific Research [email protected]
Lee, Koon-Yang Imperial College London [email protected]
LEE, Sihwa KAIST [email protected]
Lee, Sang-Soo Korea Institute of Science and Technology [email protected]
Lee, Jeonyoon MIT [email protected]
Lee, Min-Sik Pusan national university [email protected]
Lee, In-Bog School of Dentistry, Seoul National University [email protected]
Lee, Gyu Hee Seoul National University [email protected]
Lee, Woo Il Seoul National University [email protected]
Lee, Hanchul The University of Tokyo [email protected]
Lee, Don Toray Composites (America) [email protected]
Lee, Dong-Joo Yeungnam University [email protected]
Leeke, Gary University of Birmingham [email protected]
Legarth, Brian Nyvang DTU [email protected]
Legin, Blanche UTC - UTEAM [email protected]
Lehne, Markus BALance Technology Consulting GmbH [email protected]
lei, Yongpeng National University of Defense Technology [email protected]
Leijonmarck, Simon Swerea SICOMP AB [email protected]
Leite, Afonso University of Seville / ISEL [email protected]
Lekou, Denja Centre for Renewable Energy Sources and Saving (CRES) [email protected]
Leng, Jinsong Harbin Institute of Technology [email protected]
LENGERSDORF, Michael Institut für Textiltechnik (ITA) of RWTH Aachen University [email protected]
Lenz, Jennifer Imperial College London [email protected]
Leone, Frank NASA Langley Research Center [email protected]
Leong, Martin Siemens Wind Power A/S [email protected]
Leopold, Christian Technische Universität Hamburg-Harburg [email protected]
Lessard, Larry Mechanical Engineering, McGill University [email protected]
Leuret, Pierre Université des sciences de Nantes [email protected]
Li, Tongqi Aerospace Reasearch Institute of Materials & Processing
Technology
[email protected]
Li, Hongfu Beihang University [email protected]
Li, Shengzhe Beihang University [email protected]
Li, Long Beihang University [email protected]
Page 30
Name Affiliation/Company Email
Li, Ran College of Material Science and Engineering, Beihang University [email protected]
Li, Zhang Harbin Institute of Technology [email protected]
li, Wenbing Harbin Institute of Technology [email protected]
Li, Richard Massachusetts Institute of Technology [email protected]
Li, Zheling Materials Science Centre, The University of Manchester [email protected]
Li, Biao Northwestern Polytechnical University [email protected]
Li, Yazhi Northwestern Polytechnical University [email protected]
Li, Zheng Peking University [email protected]
Li, Yan Queen Mary University of London [email protected]
Li, Zhiqiang Shanghai Jiao Tong University [email protected]
Li, Xiang The University of Nottingham [email protected]
Li, Shuguang University of Nottingham [email protected]
LI, Dafei University of Nottingham [email protected]
Liao, Yingqiang Xi'an Aerospace Composite Materials Research Institute [email protected]
Liebers, Nico DLR [email protected]
Liebig, Wilfried Technische Universität Hamburg-Harburg
Liebsch, Alexander TU Dresden / Institut für Leichtbau und Kunststofftechnik [email protected]
Liebscher, André TU Kaiserslautern [email protected]
Lilholt, Hans Theme Coordinator ICCM [email protected]
Lin, Ching-Chang National Chiao Tung University [email protected]
Lin, Ya-Lin National Chiao Tung University [email protected]
Lindgaard, Esben Aalborg University, Department of Mechanical and Manufacturing
Engineering
[email protected]
Lindholm, Carl-Johan DIAB - Composites Consulting Group [email protected]
Ling, Henry CACM [email protected]
Linke, Markus University of Applied Sciences Hamburg [email protected]
Liotier, Pierre-Jacques Ecole des Mines de Saint-Etienne [email protected]
Lira, Cristian The National Composites Centre - UK [email protected]
Littlewood, Rob LaVision UK Ltd [email protected]
Liu, Xueshu Dalian University of Technology
Liu, Zhe University of Nottingham
Liu, Gang AVIC Composites Center [email protected]
Page 31
Name Affiliation/Company Email
Liu, Shufeng Beihang University [email protected]
Liu, Lulu College of Energy and Power Engineering, Nanjing University of
Aeronautics and Astronautics
[email protected]
Liu, Guangyan Department of Mechanics, School of Aerospace Engineering,
Beijing Institute of Technology
[email protected]
Liu, Hsien-Kuang Dept. of Mechanical and Computer Aided Engg., Feng Chia
Univ.,Taichung, Taiwan, ROC
[email protected]
Liu, Hao Halcrow/CH2M [email protected]
Liu, Liwu Harbin Institute of Technology [email protected]
Liu, Yanju Harbin Institute of Technology [email protected]
liu, Luqi National Center for Nanoscience and Technology, CHINA [email protected]
Liu, Kai School of Materials Science and Engineering, Beihang University [email protected]
Liu, Weiping Shanghai aircraft manufacturing company [email protected]
Liu, Longquan Shanghai Jiao Tong university [email protected]
Liu, Jie State Key Laboratory of Organic-Inorganic Composites / Beijing
University of Chemical Technology
[email protected]
Liu, Ming Temasek Laboratories@NTU [email protected]
LIU, Xu The Hong Kong University of Science and Technology [email protected]
Liu, Ling Tongji University [email protected]
Liu, Hong-Yuan University of Sydney [email protected]
Liu, Xing VUB - MeMC [email protected]
Liuyi, Yang HIT [email protected]
Lomov, Stepan KU Leuven [email protected]
Long, Zhang Northwestern Polytechnical University [email protected]
Longana, Marco Luigi University of Bristol - ACCIS [email protected]
Loos, Alfred Michigan State University [email protected]
Lopresto, Valentina University of Naples "Federico II" [email protected]
Louar, Mohamed Abderaouf Royal Military Academy [email protected]
Lu, Zixing Institute of Solid Mechanics, School of Aeronautics Sciences and
Engineering
[email protected]
Page 32
Name Affiliation/Company Email
Lu, Weibang Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, China [email protected]
Luinge, Hans TenCate Advanced Composites [email protected]
Luiz Passaia Tonatto, Maikson Federal University of Rio Grande do Sul [email protected]
Lukaszewicz, Dirk BMW Group
Lund, Erik Aalborg University, Department of Mechanical and Manufacturing
Engineering
[email protected]
LUO, Yang University of Bristol [email protected]
Luterbacher, Rafael University of Bristol [email protected]
Luyt, Riaan University of the Free State [email protected]
Lykov, Pavel “South Ural State University” (National Research University)
FSSFEI HPE “SUSU” (NRU)
[email protected]
Lynch, Christopher UCLA [email protected]
Lütke, Benjamin DLR [email protected]
LYU, Xiuqi The University of Tokyo [email protected]
Löser, Michael TU Dresden, IWM [email protected]
MMa, Chen-Chi M. Department of Chemical Engineering National Tsing Hua
University
[email protected]
Ma, Li Harbin Institute of Technology [email protected]
Ma, Songyun Helmholtz-Zentrum Geesthacht, Institute of Materials Research [email protected]
Ma, Yu E Northwestern Polytechnical University [email protected]
Ma, Jing Taiyuan University of Technology [email protected]
Ma, Hei Lam The Hong Kong Polytechnic University [email protected]
Ma, Peng-Cheng The Xinjiang Technical Institute of Physics and Chemistry, Chinese
Academy of Sciences
[email protected]
Macutkevic, Jan Vilnius university [email protected]
MADAU, Francesco Bridgestone Technical Center Europe S.p.A.
Madenci, Erdogan University of Arizona [email protected]
Madsen, Bo Technical University of Denmark, Department of Wind Energy [email protected]
Page 33
Name Affiliation/Company Email
Madsen, Marianne Lund FORCE Technology [email protected]
Magagnato, Dino Karlsruhe Institute of Technology (KIT)
Magi, Fabrizio University of Bristol [email protected]
Maguire, James University College Cork [email protected]
Mahishi, Jay Honda R &D Americas [email protected]
Mahmood, Haroon University of Trento, Italy [email protected]
Mai, Fang Queen Mary University of London [email protected]
Maier, Alexander Department of Processing of Composite [email protected]
Mair, Georg BAM Federal Intistute for Materials Research and Testing [email protected]
Makeev, Andrew University of Texas Arlington [email protected]
Malczyk, Piotr Technische Universität Dresden [email protected]
Maldonado, Jesus FHNW [email protected]
MALHO RODRIGUES, Aurelie Laboratoire des IMRCP-CNRS UMR5623 [email protected]
Mallick, Pankaj University of Michigan-Dearborn [email protected]
MALPOT, Amelie PPrime Institute (DPMM) [email protected]
Manca, Marcello DTU - Technical University of Denmark [email protected]
Mannberg, Peter Swerea SICOMP AB [email protected]
Manouchehr, Mehrtash Technical University of Denmark (DTU) [email protected]
MANTENA, Prabhakar University of Mississippi [email protected]
Mao, Lingtao State Key Laboratory of Coal Resources and Safe Mining [email protected]
Maples, Henry University of Vienna
Maragoni, Lucio University of Padova [email protected]
Margueres, Philippe Institut Clément Ader [email protected]
Marklund, Erik Swerea SICOMP [email protected]
Markussen, Christen Malte DTU Wind Energy [email protected]
Marotzke, Christian BAM [email protected]
Marques, António UP-FEUP [email protected]
Martakos, Georgios Siemens Wind Power A/S [email protected]
MARTIN, Zulima AIRBUS GROUP [email protected]
Martin, Ffion University of Nottingham [email protected]
Martín Esteban, Jose Antonio Airbus Operations S.L [email protected]
Page 34
Name Affiliation/Company Email
Martsman, Andreas TeXtreme [email protected]
Martyniuk, Karolina National Oil Well Varco [email protected]
Mas, Bartolomé IMDEA Materials Institute [email protected]
Masania, Kunal University of Applied Sciences and Arts Northwestern Switzerland
Masaya, Kawashima Doshisha University [email protected]
Maslouhi, Ahmed Université de Sherbrooke [email protected]
Masouras, Athanasios Applied Mechanics Laboratory/University of Patras [email protected]
Massabo, Roberta University of Genova [email protected]
MASSARD, Thierry CEA [email protected]
Mastrolembo, Giuseppe Cardiff University [email protected]
masuda, Go The University of Tokyo [email protected]
Matheis, Ralf Forschungsgesellschaft Kraftfahrwesen mbH Aachen
Matsubara, Terutake Technical staff/Kyushu University [email protected]
Matsuda, Satoshi University of Hyogo [email protected]
Matsuda, Tetsuya University of Tsukuba [email protected]
Matsuo, Tsuyoshi The University of Tokyo
Matsuzaki, Ryosuke Tokyo University of Science [email protected]
Matveev, Mikhail The University of Nottingham [email protected]
Matveeva, Anna Department of Materials Engineering, KU Leuven [email protected]
Mautner, Andreas Institute for Materials Chemistry & Research, University of Vienna [email protected]
McEnteggart, Ian Instron [email protected]
McGugan, Malcolm DTU Wind Energy [email protected]
Meerten, Yannick KU Leuven [email protected]
Mehdikhani, Mahoor KU Leuven [email protected]
Meier, Urs EMPA Swiss Federal Laboratories for Materials Science and
Technology
[email protected]
Melenka, Garrett University of Alberta [email protected]
Melo, Jose Daniel Federal University of Rio G Norte [email protected]
Memon, Anin Department of industrial engineering, Faculty of engineering,
Rajamangala University of Technology Thunyaburi
[email protected]
Page 35
Name Affiliation/Company Email
Mendoza Álvarez, Ana Isabel KTH Royal Institute of Technology [email protected]
Menezes, Eduardo Universidade Federal do Rio Grande do Sul [email protected]
Mengel, Finn Mengel Engineering [email protected]
Meraghni, Fodil ENSAM [email protected]
MERCIER, Sébastien ONERA
Meredith, James University of Sheffield [email protected]
Merino-Perez, Julián Luis The University of Sheffield [email protected]
Merz, Thomas Airbus Operations GmbH [email protected]
Merzkirch, Matthias KIT Karlsruhe [email protected]
Metaxa, Zoi National Technical University of Athens [email protected]
Metzkes, Karoline BAM, Federal Institute for Material Research and Testing [email protected]
Miaris, Angelos Premium AEROTEC GmbH [email protected]
Michael, Markus TU Chemnitz [email protected]
Michalik, Radek CompoSIDE Ltd [email protected]
Michaud, Veronique EPFL-LTC [email protected]
Michels, Ludger Coatema Coating Machinery GmbH [email protected]
Middendorf, Peter Institute of Aircraft Design, University of Stuttgart [email protected]
Mierzwa, Andreas Technische Universität München, Institute of Carbon Composites [email protected]
Miettinen, Arttu Department of Physics, University of Jyväskylä [email protected]
Migaki, Masakazu Kyoto Institute of Technology [email protected]
Mikhalkin, Andriy SE Ivchenko-Progress [email protected]
Mikkelsen, Lars Pilgaard DTU Wind Energy [email protected]
Miller, Sandi NASA [email protected]
Min, Byung Gil Kumoh National Institute of Technology [email protected]
Minakuchi, Shu The University of Tokyo [email protected]
Minty, Ross University of Strathclyde [email protected]
Miot, Stephanie Strategic Simulation and Analysis Ltd [email protected]
MISHNAEVSKY Jr., Leon Technical University of Denmark [email protected]
Misra, Manjusri University of Guelph [email protected]
Misumi, Jun Toray Industries, Inc. [email protected]
Mitchell, Cynthia University of Massachusetts Lowell [email protected]
Page 36
Name Affiliation/Company Email
Mitschang, Peter Institut für Verbundwerkstoffe GmbH [email protected]
MIYAKE, Takushi Gifu University
Miyano, Yasushi Kanazawa Institute of Technology [email protected]
Miyazato, Shinichi Kanazawa Institute of Technology [email protected]
Mizumoto, Kazuya YKK Corporation [email protected]
MIZUNO, Tomonori Marubun Corporation [email protected]
Mizuno, Junsuke Shizuoka University [email protected]
M'membe, Beene University of Bristol [email protected]
Mohagheghian, Iman Imperial College London [email protected]
Mohammadi, Mohsen University of New Brunswick [email protected]
Mohanty, Amar University of Guelph [email protected]
Mohd Kamal, Nurul Ain Imperial College London [email protected]
Mondain-Monval, Olivier University of Bordeaux - Centre Paul Pascal - CNRS [email protected]
Montagnier, Olivier Centre de Recherche de l'Armée de l'air [email protected]
Montenegro, Davi Inspire AG / ICS [email protected]
Moosburger-Will, Judith University of Augsburg [email protected]
Morimune-Moriya, Seira Kobe University [email protected]
Morino, Kazuhide ADEKA Corporation [email protected]
Morris, Christopher Newey University of Nottingham
Mosleh, Yasmine KU Leuven [email protected]
Motochika, Toshihiro Gifu university [email protected]
Motsch, Nicole Institut für Verbundwerkstoffe GmbH
MOUNIEN, Richard SAFRAN/ONERA [email protected]
Mouri Sardar Abadi, Peyman IMDEA [email protected]
Mouritz, Adrian RMIT University [email protected]
Mu, Chenzhong Nanyang Technological University [email protected]
Muddassir, Muhammad Institute of Composite Materials [email protected]
Mueller, Wolfgang M. University of Augsburg [email protected]
Mujika, Faustino University of the Basque Country [email protected]
Mukhopadhyay, Supratik University of Bristol [email protected]
Mulle, Matthieu King Abdullah University of Science and Technolopy [email protected]
Multhoff, Jörg ISATEC GmbH [email protected]
Page 37
Name Affiliation/Company Email
Mund, Malte Institute of joining and welding, Technische Universität
Braunschweig
[email protected]
Murakami, Takashi Shimadzu Corporation [email protected]
Murakami, Takeshi Shimadzu Corporation Japan [email protected]
Murayama, Hideaki The University of Tokyo/Japan [email protected]
Muscat, Martin University of Malta [email protected]
Mustafa, Ghulam Uni of Victoria BC Canada [email protected]
Myalski, Jerzy Silesian University of Technology [email protected]
Müller, Tobias BMW Group
Müller, Bernhard Delft University of Technology [email protected]
Mårtensson, Per Royal instuitute of technology, KTH / Volvo car group
Mäckel, Peter isi-sys GmbH [email protected]
Mäder, Edith Leibniz-Institut für Polymerforschung Dresden [email protected]
Möbius, Teresa Technische Universität Dresden [email protected]
Mörl, Stefan University of Bayreuth, Department for Polymer Engineering
NNa, Wonjin Seoul National University [email protected]
Nadot-Martin, Carole Institut Prime - CNRS - ENSMA - Université de Poitiers (UPR 3346) [email protected]
Naffakh, Mohammed ETSII-UPM [email protected]
nagao, Yosuke Kanagawa institute of technology [email protected]
NAGATSUKA, Wataru The University of Tokyo [email protected]
Nagel, Ulf University of Strathclyde [email protected]
Naito, Tadashi Honda R&D Co., Ltd [email protected]
Naito, Kimiyoshi National Institute for Materials Science [email protected]
Naito, Masaki Tokyo University of Science [email protected]
Nakada, Masayuki Kanazawa Institute of Technology [email protected]
Nakai, Asami Gifu University [email protected]
Nakai, Jun Tokyo Institute of Technology [email protected]
Nakao, Ryosuke Kyoto Institute of Technology [email protected]
Nakatani, Hayato Osaka City University [email protected]
Nanami, Norimichi Nihon University [email protected]
Page 38
Name Affiliation/Company Email
Narayanaswamy, Sridhar Institute of High Performance Computing [email protected]
Naya Montáns, Fernando IMDEA Materials [email protected]
Nelke, Harald TU Darmstadt, Institut für Stahlbau und Werkstoffmechanik [email protected]
Nepal, Dhriti Air Force Research Lab [email protected]
Newaz, Golam Wayne State University [email protected]
Neville, Robin University of Bristol [email protected]
Newley, Richard University of Bath [email protected]
Newman, Edward SAGE Publications Ltd [email protected]
Ngo, Anh Dung Ecole de technologie superieure [email protected]
NGUYEN, Van Dung University of Liege [email protected]
Nicholls, Tim Photron (Europe) Ltd [email protected]
Nickerson, William AVIAN Contractor Support to ONR Code 35 [email protected]
Nielsen, Steen Arnfred FORCE Tchnology [email protected]
Nielsen, Mark University of Bath [email protected]
Niemann, Steffen German Aerospace Centre [email protected]
Nieto, Ana Petroleum Institute [email protected]
Nikishkov, Yuri University of Texas at Arlington [email protected]
Nishi, Masato JSOL Corporation [email protected]
Nishida, Masayuki Kobe City College of Technology [email protected]
Nishino, Takashi Kobe University [email protected]
Nishiyabu, Kazuaki Kinki University [email protected]
Nissle, Sebastian Institute for Composite Materials
Niu, Bin Dalian University of Technology [email protected]
Niwa, Shoma Graduate School of Frontier Science, The University of Tokyo [email protected]
Nixon-Pearson, Oliver University of Bristol [email protected]
Noda, Junji Yamaguchi University [email protected]
Noordegraaf, Dirk SABIC Ventures [email protected]
Nordin, Mohd Nur Azmi Yamaguchi University [email protected]
Noury, Philippe DNV-GL [email protected]
Novo, Paulo Faculdade de Engenharia da Universidade do Porto [email protected]
Nunes, Elizabete GE [email protected]
Page 39
Name Affiliation/Company Email
Nunes, Joao Pedro Minho University [email protected]
Nutt, Steven R. University of Southern California [email protected]
Nyman, Tonny Saab Aeronautics [email protected]
Nørgaard Petersen, Helga DTU [email protected]
Nørlem, Michael Siemens Wind Power A/S [email protected]
OObeid, Hassan Université de Nantes, Agence Comptable - Service Facturier [email protected]
O'Bradaigh, Conchur University College Cork [email protected]
Ochoa, Ozden Texas A&M University [email protected]
Odegard, Greg Michigan Technological University [email protected]
Oelhafen, Jonathan Technische Universität München [email protected]
OFFEI, Stephen MAKCLINZ SERVICES GH.LTD [email protected]
O'Flynn, Kate University College Dublin
Ogasawara, Toshio JAXA [email protected]
Ogawa, Daichi School of Engineering, The University of Tokyo, Tokyo, Japan [email protected]
Ogi, Keiji Ehime University [email protected]
Ogihara, Shinji Tokyo University of Science [email protected]
OH, Ilkwon Korea Advanced Institute of Science and Technology (KAIST) [email protected]
Ohishi, Masaki Advanced Fibro-Science, Kyoto Institute of Technology. [email protected]
OHNISHI, Toru Tokyo Institute of Technology [email protected]
Ohtani, Akio Gifu University [email protected]
OHTSUKI, Atsumi Meijo university [email protected]
oka, Kosuke Mitsubishi heavy industries, Ltd. [email protected]
Oksman, Kristiina Luleå University of Technology [email protected]
okuda, Haruki University of Manchester [email protected]
Okunowski, Joachim European Patent Office Munich
Olave, Mireia IK4-IKERLAN [email protected]
Oleksik, Josef TU-Braunschweig, Institut für Konstruktionstechnik [email protected]
Oliveux, Geraldine University of Birmingham [email protected]
OLIVIER, Philippe Institut Clément Ader, Université de Toulouse [email protected]
Page 40
Name Affiliation/Company Email
Olofsson, Kurt Swerea SICOMP [email protected]
Olsson, Robin Swerea SICOMP [email protected]
Omkumar,
Meenakshisundaram
College of Engineering Guindy, Anna University, [email protected]
Opelt, Carlos Technological Institute of Aeronautics [email protected]
ORANGE, Gilles SOLVAY [email protected]
Oromiehie, Ebrahim UNSW-AUSTRALIA [email protected]
Ortlieb, Markus Shimadzu Europa GmbH [email protected]
Orza, Anamaria Emory University [email protected]
oueiny, Cynthia MAPIEM laboratory [email protected]
Ourahmoune, Reda Ecole Centrale de Lyon [email protected]
Ousji, Hamza Royal Military Academy [email protected]
Overgaard, Lars Chr. T. Aalborg University [email protected]
Oz, Fatih E. Bogazici University [email protected]
OZAWA, Yoshihito Fukushima University [email protected]
Ozden-Yenigun, Elif Istanbul Technical University [email protected]
PP S M, Rajesh Ecole Polytechnique de Montreal
Padovec, Zdenek Czech Technical University in Prague, Faculty of Mechanical
Engineering
[email protected]
Palardy, Genevieve Delft University of Technology [email protected]
Palardy-Sim, Marc McGill University [email protected]
Palleiro Palmou, Clara AIMEN Technology Centre [email protected]
Palungvachira, Patarapon Tokyo Institute of Technology [email protected]
Pan, Diankun Harbin Institute of Technology, PR China
Pan, Qing University of Nottingham [email protected]
Pandya, Kedar University of Cambridge [email protected]
Pankow, Mark North Carolina State University [email protected]
Pannier, Yannick Institut Pprime [email protected]
Pantelides, Chris University of Utah [email protected]
Pappas, Georgios ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE [email protected]
Paris, Federico University of Seville [email protected]
Park, Jonggil CINAP_IBS, DOES_SKKU [email protected]
Page 41
Name Affiliation/Company Email
Park, Joung Man Gyeongsang National University, Dept of Materials Eng &
Convergence Technology
[email protected]
Park, Mi-Young KAIST [email protected]
PARK, Jongshin Seoul NAtional University [email protected]
Park, Hyungbum Seoul National University, School of Mechanical and Aerospace
Engineering,
[email protected]
Park, Soohyun Yonsei University [email protected]
Parmentier, Antoine Cenaero
Parsons, Andrew University of Nottingham [email protected]
Pasbakhsh, Pooria Monash university Malaysia [email protected]
Patel, Rajesh Spectra-Physics [email protected]
Patrick, Jason University of Illinois at Urbana-Champaign
Paul, Baracchini CNRS - Université de Bordeaux [email protected]
Paul, Axel ThyssenKrupp MarineSystems GmbH [email protected]
Pavese, Matteo Politecnico di Torino [email protected]
Pearce, Garth UNSW Australia [email protected]
Peeters, Daniël Delft University of Technology [email protected]
Pegoretti, Alessandro University of Trento [email protected]
Pegorin, Fabio RMIT University [email protected]
Peijs, Ton Queen Mary, University of London [email protected]
Pender, Kyle University of Strathclyde [email protected]
Peng, Hua-Xin Zhejiang Universtiy [email protected]
Penumadu, Dayakar University of Tennessee Knoxville [email protected]
Pereira, Gilmar Technical University of Denmark [email protected]
Perera, Ricardo Technical University of Madrid [email protected]
Perez, Emile CNRS-LABORATOIRE DES IMRCP [email protected]
Pérez, Marco Universitat Politècnica de Catalunya - BarcelonaTech [email protected]
PERON, Mael Laboratoire de Thermocinétique de Nantes - UMR CNRS 6607 [email protected]
Perremans, Dieter KU Leuven [email protected]
Perrier, Amélie Institut Pprime [email protected]
Perron, Christophe Institut de mécanique et d'ingénierie de Bordeaux [email protected]
Petrov, Oleksii SE Ivchenko Progress
Page 42
Name Affiliation/Company Email
Philen, Michael Virginia Tech [email protected]
Piao, Hao University of Tokyo [email protected]
Picault, Elia Centrale Innovation [email protected]
Pickering, Stephen University of Nottingham [email protected]
Piepenbrock, Joachim Composite Technology Center Stade GmbH [email protected]
Pierce, Robert Monash University [email protected]
Pierreux, Gerrit Vrije Universiteit Brussel [email protected]
Pierron, Fabrice University of Southampton [email protected]
Piezel, Benoit Université de Bourgogne [email protected]
Pimenta, Soraia Imperial College London [email protected]
Pingkarawat, Khomkrit RMIT University [email protected]
Pinho, Silvestre Imperial College London [email protected]
Pini, Tommaso Politecnico di Milano [email protected]
Pinter, Pascal KIT / IAM-WK [email protected]
Pire, Myriam Saint-Gobain [email protected]
Pirondi, Alessandro Università di Parma [email protected]
Pissis, Polycarpos National Technical University of Athens [email protected]
Piyatuchsananon, Taweesak Yamaguchi University [email protected]
PLACET, Vincent FEMTO-ST [email protected]
Plaisted, Thomas United States Army Research Laboratory [email protected]
Pochiraju, Kishore Stevens Institute of Technology [email protected]
Pocklington, Istvan Kingston University London [email protected]
Pohl, Thomas Brose Fahrzeugteile GmbH & Co. Kommanditgesellschaft,
Hallstadt
[email protected]
Pollak, Ty Universal Technology Corporation [email protected]
Poole, Matthew University of Surrey [email protected]
Porfiri, Maurizio New York University [email protected]
Porras, Alicia Universidad de los Andes [email protected]
Post, Wouter 1Novel Aerospace Materials Group, Faculty of Aerospace
Engineering, Technical University of Delft
[email protected]
Potluri, Prasad University of Manchester [email protected]
Poulios, Konstantinos Technical University of Denmark [email protected]
Page 43
Name Affiliation/Company Email
Poursartip, Anoush The University of British Columbia
Pradyawong, Pradchar Tokyo Institute of Technology [email protected]
PREAU, Mathieu McGill University [email protected]
Primetzhofer, Andreas Lehrstuhl für Allgemeinen Maschinenbau [email protected]
Prusty, Gangadhara The University of New South Wales [email protected]
Przybyla, Craig Air Force Research Laboratory [email protected]
Psarras, Spyridon Imperial College London [email protected]
Pucci, Monica Francesca Ecoles Des Mines de Saint-Etienne [email protected]
PUPIN, Cédric École Polytechnique de Montréal [email protected]
Pupure, Liva Luleå University of Technology [email protected]
Pupurs, Andrejs Luleå University of Technology [email protected]
Puttaswamy, Manjula NITK Surathkal [email protected]
Pyl, Lincy Vrije Universiteit Brussel [email protected]
QQamar, Isabel University of Bristol [email protected]
Qi, Guocheng Beihang University [email protected]
Qi, Jiayi Beihang University [email protected]
Qi, Hang Georgia Institute of Technology/Associate Professor [email protected]
Qiang, He Nanjing University of Science and Technology [email protected]
Qing, Hai Nanjing University of Aeronautics and Astronautics [email protected]
Qu, Jianmin Northwestern University [email protected]
Quadflieg, Till Institut fuer Textiltechnik of RWTH Aachen University [email protected]
Quaresimin, Marino University of Padova - Department of Management and
Engineering
[email protected]
Quero, Franck Universidad de los Andes [email protected]
Queudet, Hippolyte ISL [email protected]
RRachik, Mohamed UTEAM , Université de Technologie de Compiègne [email protected]
Radford, Donald Colorado State University [email protected]
Radjef, Racim Swinburne University/Deakin University [email protected]
Radlmaier, Veronika Technische Universität München, Institute for Carbon Composites [email protected]
Radon, Maciej DNVGL Se [email protected]
Page 44
Name Affiliation/Company Email
Raijmaekers, Sibrand Knowledge Centre WMC [email protected]
Rajan, Varun Ecole Polytechnique Federale de Lausanne [email protected]
Rajan, Rathish Technology Centre Ketek Ltd [email protected]
RAJPUT, Moeen Ud Din Saeed Kungliga Tekniska Högskolan [email protected]
Raman, Venkadesh IRT jules verne [email protected]
Ramirez, Fernando Universidad de los Andes [email protected]
Ramli, Nur Farahana Universiti Malaysia Perlis [email protected]
Rangari, Vijaya Tuskegee University [email protected]
Rans, Calvin Delft University of Technology [email protected]
Rao, Sanjeev Aerospace Innovation Center [email protected]
Raquez, Jean-Marie University of Mons [email protected]
Rashkovan, Izabella UVICOM Co.Ltd [email protected]
Rasmussen, Leif FORCE Technology [email protected]
Ravandi, Mohammad National University of Singapore, Mechanical Engineering Dept. [email protected]
Razin, Alexander CRISM
Regazzi, Arnaud 3SR - LGP2 (CNRS)
Rehbein, Johannes German Aerospace Center (DLR) [email protected]
Reich, Gregory Air Force Research Laboratory
Reichl, Katie University of Michigan [email protected]
Reiter, Martin Johannes Kepler University / IPPE [email protected]
Remacha, Marina FIDAMC [email protected]
Ren, Yiru Hunan University
Ren, Guoqiang Sinopec [email protected]
Resch, Katharina University of Delaware, Montanuniversitaet Leoben, Polymer
Competence Center Leoben
[email protected]
Reurings, Niels Delft University of Technology [email protected]
rezaei, Mohsen DTU [email protected]
Rhead, Andrew University of Bath [email protected]
Richard, Luke University of Washington [email protected]
Ridha, Muhammad National University of Singapore [email protected]
Rivera-Gómez, Carlos UNIVERSIDAD DE SEVILLA [email protected]
Page 45
Name Affiliation/Company Email
Rizkalla, Sami North Carolina State University [email protected]
ROBERT, Gilles Solvay Engineering Plastics/Technyl Innovation Center [email protected]
Robinson, Paul Imperial College London [email protected]
Rodrigue, Denis Université Laval [email protected]
Rodriguez Perez, Miguel Angel University of Valladolid [email protected]
Rodriguez-Lence, Fernando Fidamc airbus group innovation [email protected]
Roepling, Hannes Airbus Helicopters GmbH [email protected]
Roese-Koerner, Imke German Aerospace Center (DLR) [email protected]
Rolland, Héloïse I2M - Arts et Métiers ParisTech - Bordeaux [email protected]
Romanov, Valentin S KU Leuven [email protected]
Romanzini, Daiane UFRGS [email protected]
Rose, Michael Fraunhofer IWS [email protected]
Roua, Christophe Cogit Composites [email protected]
Roure, Thomas Chomarat
Rousseau, Jerome Université de Bourgogne
Roy, Samit Aerospace Engineering Department, University of Alabama [email protected]
Roy, Ajit Air Force Research Laboratory [email protected]
ROZYCKI, Patrick Ecole Centrale de Nantes [email protected]
RT, Durai Prabhakaran University of Strathclyde [email protected]
Rubio, Carlos Centro de Ingenieria y Desarrollo Industrial [email protected]
Rudolph, Enrico Institute of Lightweight Structures, Technische Universität
Chemnitz
[email protected]
Runkel, Falk ETH Zurich [email protected]
Russo, Pietro National Research Council [email protected]
Rutz, Benjamin Toray Carbon Fibers, America [email protected]
RUZICKA, Milan Czech Technical University in Prague [email protected]
Rypl, Rostislav Czech Technical University in Prague [email protected]
Ryther, Chad Air Force Research Laboratory [email protected]
Ryu, Ho Jin Korea Advanced Institute of Science and Technology [email protected]
SSacchetti, Francisco University of twente / TPRC [email protected]
Page 46
Name Affiliation/Company Email
Sachse, Ronny Institut of Aircraft Design [email protected]
Safonov, Alexander The Skolkovo Institute of Science and Technology (Skoltech) [email protected]
Sager, Mustafa Plastic Omnium
Sahraee, Shahab Institute of Structural Analysis
Saito, Hiroshi Kanazawa Institute of Technology [email protected]
Saito, Takeshi Kyoto Institute of echnology [email protected]
Sakaguchi, Keisuke TOYOBO Co., Ltd. [email protected]
Sala, Maurizio DTU - Danmarks Tekniske Universitet [email protected]
Salaberger, Dietmar FH OOE Forschungs & Entwicklungs GmbH [email protected]
Salavagione, Horacio ICTP-CSIC [email protected]
Salem, Diana Ecole Centrale Paris (MSSMat)
Salunkhe, Santosh UNiversity [email protected]
Salvia, Michelle Ecole Centrale LYON [email protected]
Sanada, Kazuaki Toyama Prefectural University [email protected]
Sanchez, Fernando University CEU Cardenal Herrera [email protected]
SANCHEZ-BLAZQUEZ, Maria
Angeles
AIRBUS [email protected]
Sandström, Johan SP Technical Research Institute of Sweden [email protected]
Sanford, Gregory LoadPath
Sankar, Bhavani University of Florida [email protected]
Santo, Loredana University of Rome "Tor Vergata" [email protected]
Santulli, Carlo Università degli Studi di Camerino [email protected]
Sapozhnikov, Sergei South Ural State University [email protected]
Sarasini, Fabrizio Sapienza-Università di Roma [email protected]
sarlin, Essi Tampere University of Technology [email protected]
Sarrado, Carlos University of Girona [email protected]
Sasaki, Gen Hiroshima University [email protected]
Saseendran, Vishnu Technical University of Denmark (DTU) [email protected]
Sassi, Sonia Institut Clément Ader [email protected]
Sato, Chiaki Tokyo Institute of Technology [email protected]
Sause, Markus University of Augsburg [email protected]
Sava, Xavier BASF New Business GmbH [email protected]
Page 47
Name Affiliation/Company Email
Sawada, Takahiko Hitachi Ltd., [email protected]
SAVAGE, Luke UNIVERSITY OF EXETER [email protected]
Scalici, Tommaso Università degli Studi di Palermo [email protected]
Scarth, Carl University of Bristol [email protected]
Schaefer, Maximilian Technische Universität München, Institute for Carbon Composites [email protected]
Schaefer, Philipp Technische Universität München, Institute for Carbon Composites [email protected]
Schaeuble, Ralf Fraunhofer Institute for Mechanics of Materials IWM [email protected]
Schemmann, Malte Karlsruhe Insitute of Technology [email protected]
Schieler, Oliver AUDI AG [email protected]
Schiffer, Andreas Khalifa University [email protected]
Schijve, Warden SABIC [email protected]
Schillfahrt, Christian Chair of Processing of Composites [email protected]
schipperen, Ingrid TNO [email protected]
Schledjewski, Ralf Montanuniversitaet Leoben / Christian Doppler Laboratory for
High Efficient Composite Processing
Schleupen, Josef University of Applied Sciences Aachen [email protected]
Schlimper, Ralf Fraunhofer Institute for Mechanics of Materials IWM [email protected]
Schmidt, Henrik BASF SE
Schmidt, Jonathan Chair and Institute for Engineering Design [email protected]
Schmidt, Jens Fraunhofer ISC-HTL [email protected]
Schmidt-Lehr, Matthias Hamburg University of Technology [email protected]
Schmitt, Stefan AZL of RWTH Aachen University [email protected]
Schmitz, André Institute of Aircraft Design and Lightweight Structures [email protected]
SCHNEIDER, Julien SNECMA
Schneller, Anna University of Augsburg [email protected]
Schnurr, Raphael Technische Universität Braunschweig, Institute of Machine Tools
and Production Technology
[email protected]
Schorer, Nora Experimental Physics II, Institute of Physics, University of
Augsburg
[email protected]
Schreier, Hubert W Correlated Solutions, Inc. [email protected]
Page 48
Name Affiliation/Company Email
Schuecker, Clara Montanuniversität Leoben, Designing Plastics and Composite
Materials
Schulte, Karl Technische Universität Hamburg-Harburg [email protected]
Schuster, Jens University of Applied Sciences Kaiserslautern, Institut für
Kunststofftechnik Westpfalz
[email protected]
Schwab, Martin Institute of Lightweight Design and Structural Biomechanics [email protected]
Schwartzentruber, Jeff Ryerson Univeristy [email protected]
Schwendemann, Daniel Hochschule für Technik Rapperswil IWK
Schäfer, Kay TU Chemnitz
Schäfer, Jens Institut für Textiltechnik der RWTH Aachen University [email protected]
Scienza, Lisete Federal University of Rio Grande do Sul [email protected]
Scott, Murray Advanced Composite Structures Australia [email protected]
Sedighiamiri, Amin SABIC [email protected]
Seemann, Ralf TUHH / Institute PKT [email protected]
Semenova, Irina Ioffe Physical Technical Institute [email protected]
Seon, Guillaume University of Texas at Arlington [email protected]
Seong, Dong Gi Korea Institute of Materials Science [email protected]
Sergeichev, Ivan Skoltech [email protected]
Serrano, Leonell LBMS [email protected]
Servinis, Linden Deakin University [email protected]
Seveno, David KU Leuven
Shadmehri, Farjad Bombardier [email protected]
Shaffer, Milo Imperial College London [email protected]
shahin, Khaled NYUAD
Shamsuddin, Siti Rosminah Imperial College London
Shamsudin, Mohd Hafizi Universiti Kuala Lumpur [email protected]
Shan, Wanliang University of Nevada, Reno [email protected]
Shang, Junjun College of Mechanical Engineering and Applied Electronics
Technology , Beijing University Of Technology
[email protected]
Shaplov, Alexander INEOS RAS [email protected]
Sheen, Yuung-Ching ITRI [email protected]
Sheikh, Abdul Hamid University of Adelaide [email protected]
Page 49
Name Affiliation/Company Email
Shen, Huishen Shanghai Jiao Tong University
Shen, Xi Department of Mechanical and Aerospace Engineering, The Hong
Kong University of Science and Technology
[email protected]
shen, Lulu Tongji University [email protected]
Shen, Yiou Tongji University [email protected]
Shepherd, Robert Cornell University [email protected]
Sherafat, Mohammad Hossein McGill University [email protected]
Shi, Hanqiao Aerospace Research Institute of Materials & Processing
Technology
[email protected]
Shi, Jian Akita prefectural university [email protected]
Shi, Duoqi Beihang University [email protected]
shi, Huajie Delft University of Technology [email protected]
Shimamura, Yoshinobu Shizuoka University [email protected]
Shin, Cs Department of Mechanical Engineering, National Taiwan
University
[email protected]
Shin, Seeun Yonsei University [email protected]
Shioyama, Hiroshi AIST [email protected]
Shipsha, Anton KTH Royal Institute of Technology [email protected]
Shishkina, Oksana KU Leuven [email protected]
Shiyu, Wang Harbin Institute of Technology [email protected]
Silberschmidt, Vadim Loughborough University [email protected]
siljander, Sanna Tampere University of Technology [email protected]
Silvain, Jean-Francois ICMCB-CNRS [email protected]
Simenou Jambong, Gidéon IRT Jules Verne [email protected]
Simões, Rogério University of Beira Interior [email protected]
Simon, Martin AUDI AG
Simon, Zoltan Aerospace & Advanced Composites gmbH [email protected]
Sims, Graham National Physical Laboratory [email protected]
Singery, Vicky Chomarat [email protected]
Singh, Harpreet Indian Institute of Technology Delhi [email protected]
Singh, Chandra Veer University of Toronto [email protected]
Sisodia, Sanjay Dept. of Engineering Science/Univ. Uppsala [email protected]
Page 50
Name Affiliation/Company Email
Sistaninia, Masoud Materials Center Leoben Forschung GmbH [email protected]
Sitnikova, Elena University of Nottingham [email protected]
SKANDALI, Maria DELFT UNIVERSITY OF TECHNOLOGY [email protected]
Skordos, Alex Cranfield University [email protected]
Slinker, Keith Air Force Research Laboratory [email protected]
Smith, Paul University of Surrey
Smith, Patrick Sheffield University [email protected]
Smith, Lloyd Washington State University [email protected]
Snyder, Matt US Air Force [email protected]
Sodano, Henry University of Florida
Sodoke, Kossi Fabrice Université du Québec à Trois-Rivières [email protected]
Song, Weidong Beijing Institute of Technology [email protected]
Sonmez, Fazil O. Bogazici University [email protected]
Sorrentino, Luigi CNR - IPCB [email protected]
Sottos, Nancy University of Illinois Urbana-Champaign
Soulas, Floriane ISAE [email protected]
Stauning, Hermed René The Danish Plastics Federation, Division of Composite Materials [email protected]
Stefic, Tihomir University of J.J.Strossmayer of Osijek, Faculty of civil engineering
in Osijek
[email protected]
Stegelmann, Michael Institute of Lightweight Engineering and Polymer Technology [email protected]
Stelzer, Steffen Montanuniversitaet Leoben [email protected]
Stigh, Ulf University of Skövde [email protected]
Stodieck, Olivia University of Bristol [email protected]
Stojkovic, Miroslav National Composites Centre
Stolyarov, Oleg St. Petersburg State Polytechnical University [email protected]
Storage, Tara Air Force Research Laboratory
Storage, Kara Air Force Research Laboratory
Strange, Marianne FORCE Technology [email protected]
Straumit, Ilya KU Leuven [email protected]
Strömberg, Emma KTH Royal Institute of Technology [email protected]
STUDART, André R. ETH ZURICH [email protected]
Page 51
Name Affiliation/Company Email
Subramanian, Nithya Arizona State University [email protected]
Suemasu, Hiroshi Sophia University [email protected]
Suganuma, Hirofumi The University of Tokyo [email protected]
Sugio, Kenjiro Institute of Engineering, Hiroshima Univ. [email protected]
Sui, Gang Beijing University of Chemical Technology [email protected]
Sullivan, Erin Georgia Institute of Technology [email protected]
Summerscales, John Plymouth University [email protected]
Sun, Dan Queen's University Belfast
Sun, Baogang Aerospace Research Institute of Materials & Processing
Technology
[email protected]
Sun, Fei Huazhong University of Science and Technology [email protected]
SUN, Wen-Hsien Material and Chemical Research Laboratories [email protected]
SUN, Nijuan Science and Technology on Advanced Functional Composites
Laboratory, Aerospace Research Institute of Materials &
Processing Technology
[email protected]
SUN, Xinying The Hong Kong University of Science and Technology [email protected]
Sunter, Deborah U.S. Department of Energy [email protected]
Sutcliffe, Michael Cambridge University Engineering Department [email protected]
Suzuki, Takuya IHI Corporation [email protected]
Swiergiel, Nicolas AIRBUS GROUP [email protected]
Swolfs, Yentl KU Leuven [email protected]
Szymański, Wojciech Institute of Non-Ferrous Metals in Gliwice Light Metals Division
Skawina
[email protected]
Söderhäll, Kenneth JK-Lab [email protected]
Sörensen, Bent F DTU Wind Energy [email protected]
Sørensen, René Department of Mechanical and Manufacturing Engineering at
Aalborg University
TTABATABAEI, Seyed Ahmad KULEUVEN [email protected]
Takagaki, Kazunori The University of Tokyo [email protected]
Takagi, Hitoshi Tokushima University [email protected]
Takahashi, Ichiya Mitsubishi Electric Corporation
Takahashi, Jun The University of Tokyo [email protected]
Page 52
Name Affiliation/Company Email
Takeda, Nobuo The University of Tokyo [email protected]
Taketa, Ichiro Toray Industries, Inc. [email protected]
Talò, Michela Sapienza University of Rome - Dept. of Structural and
Geotechnical Engineering
[email protected]
Tan, K.T. The University of Akron [email protected]
Tan, Zhi Bin University of Sydney [email protected]
Tanabe, Daiki Osaka university [email protected]
TANAKA, Kazuto Doshisha University [email protected]
TANAKA, Mototsugu Kanazawa Institute of Technology [email protected]
Tang, Shuli Department of Systems Innovation, School of Engineering, The
University of Tokyo
[email protected]
tange, Yasuhiko Honda Engineering Europe
TAPEINOS, Ilias DELFT UNIVERSITY OF TECHNOLOGY [email protected]
Tarfaoui, Mostapha ENSTA Bretagne [email protected]
Taro, Nakamura The University of Tokyo [email protected]
Tashkinov, Mikhail Perm National Research Polytechnic University [email protected]
Tatsuno, Daichi Kanazawa University, Institute of Science and Engineering [email protected]
Taya, Minoru University of Washington
Taylor, Graham Oxford University [email protected]
Tcharkhtchi, Abbas ENSAM / ARTS [email protected]
Tcherbi-Narteh, Alfred Tuskegee University [email protected]
tehrani, Mehran University of New Mexico [email protected]
Terrasi, Giovanni Empa [email protected]
Theotokoglou, Efstathios National Technical university of Athens [email protected]
Therriault, Daniel Ecole Polytechnique
Thomas, Evan Air Force Research Laboratory - University of Dayton Research
Institute
[email protected]
Thomas, James P. Theme Coordinator ICCM [email protected]
Thomas, Kenneth University of Tennessee [email protected]
Thomason, James University of Strathclyde
THOMASSEY, Matthieu CETIM-CERAMT [email protected]
Thomopoulos, Stavros Washington University [email protected]
Thorvaldsen, Tom Norwegian Defence Research Establishment (FFI) [email protected]
Page 53
Name Affiliation/Company Email
Thostenson, Erik University of Delaware [email protected]
Thumsorn, Supaphorn Kyoto Institute of Technology [email protected]
Thurnherr, Claudia Laboratory of Composite Materials and Adaptive Structures /
Department of Mechanical and Process Engineering / ETH Zürich
[email protected]
ThyboThomsen, Ole Aalborg University [email protected]
TIAR, Mohamed Amine UNIVERSITE DE TECHNOLOGIE DE COMPIEGNE [email protected]
Tippur, Hareesh Auburn University [email protected]
Tirillò, Jacopo La Sapienza University of Rome [email protected]
Tofts, Alistair Correlated Solutions, Inc. [email protected]
Tomar, Vikas Purdue University West Lafayette [email protected]
TOMIDA, Shoichi HONDA R&D Center
Tomioka, Masao MITSUBISHI RAYON CO., LTD. [email protected]
Tomoaia-Cotisel, Maria Babes-Bolyai University of Cluj-Napoca [email protected]
Tonejc, Maximilian Christian Doppler Laboratory for High Efficient Composite
Processing
[email protected]
Toshiro, Ohori The Univercity of Tokyo [email protected]
Toubal, Lotfi Laboratory of Mechanics and Eco-Materials, University of Quebec [email protected]
Trappe, Volker BAM Federal Institute for Materials Research and Testing [email protected]
Trask, Richard University of Bristol [email protected]
Treutenaere, Sylvain University of Valenciennes - LAMIH [email protected]
Trifol, Jon DTU [email protected]
Truong, Hieu Texas A&M University [email protected]
Tröltzsch, Jürgen Technische Universität Chemnitz
Tsai, Jia-Lin National Chiao Tung University
Tsongas, Konstantinos Aristotle University of Thessaloniki [email protected]
Tsotsis, Thomas The Boeing Company [email protected]
Tsukada, Takuhei The University of Tokyo [email protected]
Tual, Nicolas LBMS ENSTA Bretagne [email protected]
Turner, Thomas University of Nottingham
Turon, Albert Universitat de Girona [email protected]
Tweed, John Dept of Math and Stats, Old Dominion University [email protected]
Page 54
Name Affiliation/Company Email
Tyler, Philip Enabling Process Technologies Limited [email protected]
Tzeng, Shinn-Shyong Tatung University [email protected]
UUcar Sokoli, Hülya Aalborg Universitet Esbjerg [email protected]
Uchida, Toshikazu Kyoto Institute of Technology [email protected]
UDA, Kazufumi Dept. of Vehicle System Eng., Faculty of Creative Eng., Kanagawa
Institute of Technology
[email protected]
Uda, Nobuhide Kyushu University [email protected]
Ueki, Yosuke Hitachi LTD [email protected]
Ueno, Ichiro Tokyo University of Science [email protected]
Uhlig, Kai Leibniz-Instiut für Polymerforschung Dresden e.V. [email protected]
Ulven, Chad North Dakota State University [email protected]
Umer, Rehan Khalifa University [email protected]
Unterweger, Christoph Kompetenzzentrum Holz GmbH [email protected]
Uozumi, Tadashi Gifu University
Ushakov, Andrey Skolkovo Institute of Science and Technology
Utku, Feride Sermin Yeditepe University [email protected]
Uzawa, Kiyoshi Kanazawa Institute of technology [email protected]
V,WVachon, Pierre-Luc Ecole de technologie superieure [email protected]
Wafai, Husam King Abdullah University of Science and Technology (KAUST) [email protected]
Wagner, Ronald German Aerospace Centre [email protected]
Wagner, Daniel H Weizmann Institute of Science [email protected]
WAHL, Jean-Christophe I2M - Université de Bordeaux [email protected]
Vaia, Richard US Air Force [email protected]
Walker, Eric Honda R&D Americas, Inc.
Vallons, Katleen KULeuven [email protected]
Valvo, Paolo S. University of Pisa [email protected]
Wan, Liqiang East China University of Science and Technology [email protected]
WAN, Yi the University of Tokyo [email protected]
van den Brink, Wouter NLR [email protected]
van der Heijden, Sam Ghent University [email protected]
Page 55
Name Affiliation/Company Email
Van Hemelrijck, Danny Vrije Universiteit Brussel [email protected]
van Meerbeek, Ilse Cornell University [email protected]
Wan Nawawi, Wan Mohd Fazli Imperial College London [email protected]
van Wingerde, Arno Fraunhofer IWES [email protected]
van Vuure, Aart Willem KU Leuven [email protected]
Vandellos, Thomas HERAKLES [email protected]
Wang, Yanjie Beihang University
Wang, Rongguo Harbin Institute of Technology
wang, Jin Shenyang Aircraft Design & Research Institute
Wang, Han Beihang University [email protected]
Wang, Yukun Beihang University [email protected]
Wang, Shaokai Beihang University [email protected]
Wang, Zheng Chair for Automotive Lightweight Construction [email protected]
Wang, Yanlei Dalian University of Technology [email protected]
Wang, Jinyan Dalian University of Technology [email protected]
Wang, Dan Delft University of Technology [email protected]
Wang, Peipei Fraunhofer IWES [email protected]
Wang, Xiaojun Harbin Institute of Technology [email protected]
WANG, Bing Harbin institute of technology [email protected]
Wang, Wen-Xue Kyushu University [email protected]
Wang, Yazhen Qiqihar [email protected]
Wang, Hai Shanghai Jiao Tong University [email protected]
Wang, Chun Sir Lawrence Wackett Aerospace Research Centre, RMIT
University
[email protected]
wang, Xin Southeast University [email protected]
Wang, Ying The University of Manchester [email protected]
Wang, Yanchao Tongji University [email protected]
WANG, Yuan UNIVERSITY OF EXETER [email protected]
Wardle, Brian MIT
Varna, Janis Lulea University of Technology [email protected]
Vasco, Marina Technological Federal University of Paraná [email protected]
Watanabe, Yoshimi Nagoya Institute of Technology [email protected]
Page 56
Name Affiliation/Company Email
Watanabe, Naoyuki Tokyo Metropolitan University [email protected]
Watt, Gerald TISICS Ltd [email protected]
WAUGH, Rachael University of Southampton [email protected]
Vaziri, Reza The University of British Columbia [email protected]
Weaver, Paul University of Bristol [email protected]
Wehrkamp-Richter, Tobias Technische Universität München, Institute for Carbon Composites [email protected]
Wei, Qian Dalian University of Technology [email protected]
Wei, Haowen The University of Tokyo [email protected]
Weidenmann, Kay Karlsruhe Institute of Technology [email protected]
Weiland, Jakob Technische Universität München / Institute for Carbon
Composites
[email protected]
Weinzierl, Matthias Technische Universität München
Weiss, Roland Schunk Kohlenstofftechnik GmbH [email protected]
Wellander, Anna Surface Measurement Systems /RAMCON [email protected]
Wells, Garry DSTL
Welsh, Jeffry USAF [email protected]
Velthuis, Rudi ABB Switzerland - Corporate Research [email protected]
Werner, Daniel Fraunhofer Insitute for Production Technology IPT
Verners, Osvalds Faculty of Civil Engineering and Geosiences, TU Delft [email protected]
Verpoest, Ignaas Theme Coordinator ICCM [email protected]
Vescovini, Riccardo Politecnico di Milano [email protected]
Wetjen, Denise BMW AG
Whitcomb, John Texas A&M University [email protected]
White, Scott University of Illinois at Urbana-Champaign [email protected]
Wicks, Sunny Lockheed Martin [email protected]
Wilkinson, Arthur University of Manchester [email protected]
Villalobos, Daniel Surface Measurement Systems Ltd. [email protected]
Williams, Ryan N12 Technologies [email protected]
Wilson, Peter The University of Sheffield [email protected]
Winberg, Fredrik Biteam AB [email protected]
Vinogradov, Vladimir Newcastle University [email protected]
Wippo, Verena Laser Zentrum Hannover e.V. [email protected]
Page 57
Name Affiliation/Company Email
Wisnom, Michael University of Bristol [email protected]
Wittich, Hans Technische Universität Hamburg-Harburg [email protected]
Vlak, Frane University of Split, FESB [email protected]
Vogel, Christian Institute of Lightweight Engineering and Polymer Technology [email protected]
Wolff, Johannes German Aerospace Center [email protected]
Wolfram, Tobias KL Medizintechnik GmbH&CoKG [email protected]
Volk, Brent Air Force Research Laboratory [email protected]
Wolodko, John Alberta Innovates - Technology Futures [email protected]
Won, Jong Sung Chungnam National University [email protected]
Won, You-Jin Korea Aerospace Research Institute [email protected]
von der Heyden, Aaron TU Darmstadt, Institute for Steel Structures and Materials
Mechanics
[email protected]
Wong, Joanna ETH Zurich [email protected]
Wong, Tsz-Ting The Hong Kong Polytechnic University [email protected]
Wongsriraksa, Patcharat Kanazawa Institute of Technology
Vu, Van The University of Adelaide [email protected]
Wu, Chang-Mou Department of Materials Science and Engineering, National
Taiwan University of Science and Technology
[email protected]
Wu, Shusen School of Material Sci. & Eng., Huazhong University of Sci. & Tech. [email protected]
WU, Ying The Hong Kong University of Science and Technology [email protected]
Wu, Qi the University of Tokyo [email protected]
Wucher, Benoit Cenaero [email protected]
Vukasovic, Marko University of Split, Faculty of Electrical Engineering, Mechanical
Engineering and Naval Architecture
[email protected]
VULCAN, Maria Adina Univeristy Politehnica of Bucharest, Faculty of Applied Chemistry
and Materials Science
vuorinen, Jyrki Tampere University of Technology [email protected]
Wysocki, Maciej Swerea SICOMP [email protected]
XXian, Guijun Harbin Institute of Technology [email protected]
Page 58
Name Affiliation/Company Email
xianglong, Guo State Key Laboratory of Metal Matrix Composites, Shanghai Jiao
Tong University
[email protected]
Xiao, Tang Harbin Engineering University [email protected]
xiao, Xinli harbin institute of technology [email protected]
Xie, Ningbo University of Bristol, UK [email protected]
Xintao, Wang Center for Composite Materials and Structures, Harbin Institute of
Technology
[email protected]
Xiong, Jian Harbin Institute of Technology [email protected]
Xu, Chenghai Center for Composite Materials, Harbin Institute of Technology [email protected]
Xu, Liang Department of Engineering Mechanics,Dalian University of
Technology,Dalian,China
[email protected]
xu, Zhihong Nanjing University of science and technology [email protected]
YYaldiz, Recep SABIC [email protected]
Yamamoto, Namiko Penn State University [email protected]
Yamasaki, Tatsuya Kyushu University [email protected]
Yan, Jun Dalian University of Technology [email protected]
Yan, Wenyi Monash University [email protected]
Yan, Shibo University of Nottingham [email protected]
Yanes Armas, Sonia COMPOSITE CONSTRUCTION LABORATORY (CCLAB)- ECOLE
POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL)
[email protected]
Yang, Yang Center for Microsystems Technology, IMEC and Ghent University [email protected]
Yang, Qing-Sheng College of Mechanical Engineering and Applied Electronics
Technology, Beijing University of Technology
[email protected]
Yang, Lei Dalian University of Technology [email protected]
Yang, Rui Dalian University of Technology [email protected]
Yang, Fubiao Department of Materials Science and Engineering, National
University of Defense Technology
[email protected]
Yang, Qiang Harbin institute of technology [email protected]
Yang, Zhenyu Institute of Solid Mechanics, School of Aeronautics Sciences and
Engineering, Beihang University
[email protected]
Page 59
Name Affiliation/Company Email
yang, Chengpeng Northwestern Polytechnical University [email protected]
Yang, Yu Nottingham University [email protected]
Yang, Yang Shanghai aricraft manufacturing Company [email protected]
Yang, Rongjuan Tsinghua University [email protected]
Yang, Qingda University of Miami [email protected]
Yang, Qiao Jie University of Oslo [email protected]
Yang, Liu University of Strathclyde [email protected]
Yano, Fumiaki Shimadzu Corporation [email protected]
Yano, Mamoru Tokyo University of Science, Faculty of Industrial Science and
Technology, Department of Material Science and Technology
[email protected]
Yanwei, Zhu Harbin Institute of Technology [email protected]
Yao, Liaojun Delft University of Technology [email protected]
Yaraghi, Nicholas University of California, Riverside [email protected]
Yarza Sobral, Pablo AIMEN [email protected]
Yasaee, Mehdi University of Bristol [email protected]
Yashiro, Shigeki Shizuoka University [email protected]
Yazdani Nezhad, Hamed Irish Centre for Composites Research, Materials and Surface
Science Institute, University of Limerick
[email protected]
Ye, Lin The University of Sydney [email protected]
Yeh, Yu Kuei National Cheng Kung University [email protected]
YIN, Qi Université de Technologie de Compiègne [email protected]
Yokozeki, Tomohiro University of Tokyo [email protected]
Yom-Tov, Ortal Technion-Israel Institute of Technology [email protected]
Yong, Ana National Physical Laboratory [email protected]
Yoo, Hye-Jin Surface Technology Research Group/POSCO [email protected]
Yoon, Yonghoon EPFL (ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE) [email protected]
YOON, Kwanhan Kumoh National Institute of Technology [email protected]
Yoon On, Seung Department of organic materials and fiber engineering / Chonbuk
national university
[email protected]
York, Christopher University of Glasgow [email protected]
Yoshida, Keishiro Kanazawa Institute of Technology
Yoshimura, Akinori Japan Aerospace Exploration Agency [email protected]
Page 60
Name Affiliation/Company Email
Young, Robert University of Manchester [email protected]
Yquel, Virginie Cabot Switzerland GmbH [email protected]
Yu, Hana ACCIS, University of Bristol [email protected]
Yu, Yalin Beihang University [email protected]
YU, Qiyong Beihang University [email protected]
Yu, Long Imperial College London [email protected]
YU, Bin Nanyang Technological University [email protected]
Yu, Yin School of Aeronautics and Arstronautics, Shanghai Jiao Tong
University
[email protected]
Yu, Zhefeng School of aeronautics and astronautics, Shanghai Jiao Tong
University
[email protected]
Yu, Tao School of Aerospace Engineering and Applied Mechanics, Tongji
University
[email protected]
Yu, Woong-Ryeol Seoul National Universiity [email protected]
Yu, Mingming Shanghai university [email protected]
Yu, Shuhui Shenzhen Institutes of Advanced Technology, Chinese Academy of
Sciences
[email protected]
Yu, Tianhong University of Nottingham [email protected]
Yu, Jilin University of Science and Technology of China [email protected]
Yuan, Zeshuai Institute of solid mechanics, Behang university [email protected]
Yuan, Fuh-Gwo North Carolina State University [email protected]
Yuan, Qiaolong School of Materials Science and Engineering [email protected]
Yuan, Xiaguang Sinopec [email protected]
Yuan, Huang Tsinghua University [email protected]
Yubo, Feng Harbin Institute of Technology [email protected]
Yudhanto, Arief KAUST (King Abdullah University of Science and Technology) [email protected]
Yüksel, Ferhat Fraunhofer ICT-FIL [email protected]
ZZafari, Behrouz The University of Warwick [email protected]
Zaharia, Catalin University Politehnica of Bucharest, Advanced Polymer Materials
Group
[email protected]
Zainal Abidin, Alfaferi Fraunhofer IKTS Dresden, Germany [email protected]
Page 61
Name Affiliation/Company Email
ZANG, Yu Qiqihar University, College of Materials Science and Engineering [email protected]
Zangenberg, Jens LM Wind Power [email protected]
Zantkuijl, Rob Fokker Aerostructures [email protected]
Zappalorto, Michele University of Padova
Zarif Karimi, Navid University of Bologna [email protected]
Zattera, Ademir José Universidade de Caxias do Sul [email protected]
Zeiler, Rico Polymer Engineering, University of Bayreuth, Germany
Zeng, Qingxuan Harbin Institute of Technology [email protected]
Zeng, You Institute of Metal Research, Chinese Academy of Sciences [email protected]
Zeng, Xuesen University of Nottingham [email protected]
Zenkert, Dan KTH - Royal Institute of Technology [email protected]
Zhang, Bing University of Bristol
Zhang, Boming Beihang University [email protected]
Zhang, Taotao Beihang University [email protected]
Zhang, Mengsi Beihang University [email protected]
Zhang, Qian Beihang University [email protected]
Zhang, Zuoguang Beihang University [email protected]
Zhang, Tong Beijing Institute of Aeronautical Materials [email protected]
Zhang, Jianyu College of Aerospace Engineering, Chongqing University, China [email protected]
Zhang, Zhiyuan Daiwa Itagami Co. Ltd. [email protected]
Zhang, Jifeng Department of Aerospace Engineering. Harbin Engineering
Universtiy
[email protected]
Zhang, Fenghua Harbin Insititute of Technology [email protected]
Zhang, Qiwei Harbin Institute of Technology [email protected]
Zhang, Kuangyi Imperial College [email protected]
ZHANG, Liying Nanyang Technological University [email protected]
Zhang, Zhong National Center for Nanoscience and Technology, China [email protected]
Zhang, Han Queen Mary, University of London [email protected]
Zhang, Di Shanghai Jiao Tong University [email protected]
Zhang, Ousheng Sinopec [email protected]
Zhang, Zhongsen Tongji University [email protected]
Page 62
Name Affiliation/Company Email
Zhang, Xiao-Chong University of Bristol [email protected]
ZHANG, Guanhua UNIVERSITY OF EXETER [email protected]
Zhang, Hailong University of Science and Technology Beijing [email protected]
Zhao, Xiaoran Beihang University [email protected]
Zhao, Yan Beihang University [email protected]
Zhao, Jian Shanghai Jiao Tong University [email protected]
Zhao, Xin University of Manchester [email protected]
ZHAO, Xiantao University of Nottingham [email protected]
zhenchong, Zhang BeiHang University [email protected]
Zheng, Nan The University of Sydney [email protected]
Zheng, Zhijun University of Science and Technology of China, Department of
Modern Mechanics
[email protected]
zhenjin, Cui kyoto Institute of Technology
Zhikharev, Mikhail South Ural State University [email protected]
Zhou, Yan East China University of Science and Technology [email protected]
Zhou, Min Georgia Institute of Technology [email protected]
Zhou, Gang Loughborough University, Dept of Aeronautical & Automotive
Engineering
[email protected]
Zhou, Xiang Shanghai Jiao Tong University [email protected]
Zhou, Eric UDRI [email protected]
ZHOU, Helezi University of Sydney [email protected]
Zinno, Raffaele University of Calabria [email protected]
Zou, Ting Ting Elsevier [email protected]
Zrida Ammar, Hana Luleå University of Technology [email protected]
Zu, Lei Wuhan University of Technology [email protected]
Zympeloudis, Evangelos University of Bristol [email protected]
As per 17 July