-
らΗぎΩぞΗ りΠΙらΟぞりΩげ
DoP: 0107
áια ぞύσ〃。´α χ。´ι゛ής αá゛ύヾωσ。ς FIS VL (Χ。´ι゛ό αá゛ύヾιο áια χヾήσ。
σ0 σ゛仝ヾό~0´α) – EL
1. Μο`α~ι゛ός ゛ω~ι゛ός 〃α仝〃οヽοί。σ。ς 〃ο仝 〃ύヽο仝 〃ο仝 ヽヾοϊό`〃ος: DoP:
0107
2. Πヾοβ゜0ヽό´0`。ふ-0ςぶ χヾήσ。ふ-0ις): り゛ 〃ω` 仝σ〃έヾω` σ〃0ヾέωση σ0
ヾηá´α〃ω´έ`ο ή ´η ヾηá´α〃ω´έ`ο σ゛仝ヾό~0´α, ~0ί〃0 〃ο ヽヾοσάヾ〃η´α, 0ι~ι゛ά
〃α ヽαヾαヾ〃ή´α〃α B 1 - B 8
3. Κα〃ασ゛0仝ασ〃ής: fischerwerke GmbH & Co. KG,
Klaus-Fischer-Straße 1, 72178 Waldachtal, よ0ヾ´α`ία
4. り¨ο仝σιο~ο〃。´έ`ος α`〃ιヽヾόσωヽος: --
5. ぞύσ〃。´α/σ仝σ〃ή´α〃α AVCP (α¨ιο゜όá。σ。 ゛αι 0ヽα゜ήθ0仝σ。 〃。ς
σ〃αθ0ヾό〃。〃ας 〃。ς 0ヽί~οσ。ς): 1
6. り仝ヾωヽαϊ゛ό έááヾαφο α¨ιο゜όá。σ。ς: ETAG 001; 2013-04
り仝ヾωヽαϊ゛ή 〃0χ`ι゛ή α¨ιο゜όá。σ。: ETA-10/0352; 2017-08-10
Οヾáα`ισ´ός 〃0χ`ι゛ής α¨ιο゜όá。σ。ς: DIBt
Κοι`οヽοι。´έ`ος(-οι) οヾáα`ισ´ός(-οι): 1343 – MPA Darmstadt
7. ら。゜ωθ0ίσα(-0ς) 0ヽί~οσ。(-0ις):
ぐηχα`ι゛ή α`〃ισ〃αση ゛αι σ〃αθ0ヾό〃η〃α (BWR 1), Ασφά゜0ια σ〃η χヾήση
(BWR 4)
Χαヾα゛〃ηヾισ〃ι゛ές 〃ι´ές 仝ヽό σ〃α〃ι゛ή ゛αι η´ισ〃α〃ι゛ή 0`έヾá0ια,
´0〃α〃όヽιση: ~0ί〃0 〃ο ヽαヾάヾ〃η´α, σ仝á゛0゛ヾι´έ`α 〃ο ヽαヾάヾ〃η´α C 1 - C
6
Ασφά゜0ια σ0 ヽ0ヾίヽ〃ωση φω〃ιάς (BWR 2)
Α`〃ί~ヾαση σ0 φω〃ιά : だο Αá゛ύヾιο ゛α゜ύヽ〃0ι 〃ις αヽαι〃ήσ0ις 〃ης
がα〃ηáοヾίας A 1 Α`〃ίσ〃αση σ〃η φω〃ιά: ぐがり
8. Κα〃ά゜゜。゜。 〃0χ`ι゛ή 〃0゛´。ヾίωσ。 ゛αι/ή 0ι~ι゛ή 〃0χ`ι゛ή 〃0゛´。ヾίωσ。:
---
Η 0ヽί~οσ。 〃ο仝 ヽヾοϊό`〃ος ヽο仝 〃α仝〃οヽοι0ί〃αι α`ω〃έヾω 0ί`αι σύ´φω`。
´0 〃。 ふ〃ιςぶ ~。゜ωθ0ίσαふ-0ςぶ 0ヽί~οσ。ふ-0ιςぶ. Α仝〃ή 。 ~ή゜ωσ。 0ヽι~όσ0ω`
0゛~ί~0〃αι σύ´φω`α ´0 〃ο` Κα`ο`ισ´ό ふりりぶ Αヾ. ンヰ5/ヲヰヱヱ ´0
αヽο゛゜0ισ〃ι゛ή 0仝θύ`。 〃ο仝 ゛α〃ασ゛0仝ασ〃ή ヽο仝 ヽヾοσ~ιοヾί、0〃αι
ヽαヾαヽά`ω.
ぢヽοáヾαφή áια ゜οáαヾιασ´ό ゛αι 0¨ ο`ό´α〃ος 〃ο仝 ゛α〃ασ゛0仝ασ〃ή
αヽό:
Andreas Bucher, Dipl.-Ing. Wolfgang Hengesbach, Dipl.-Ing.,
Dipl.-Wirtsch.-Ing.
Tumlingen, 2017-08-17
- Α仝〃ή 。 らή゜ωσ。 Αヽό~οσ。ς ´0〃αφヾάσ〃。゛0 σ0 ~ιάφοヾ0ς á゜ώσσ0ς. σ0
ヽ0ヾίヽ〃ωσ。 ヽο仝 仝ヽάヾχ0ι α´φιβο゜ία áια 〃。 ´0〃άφヾασ。 。 αáá゜ι゛ή έ゛~οσ。
θα 仝ヽ0ヾισχύ0ι ヽά`〃α.
- だο ヽαヾάヾ〃。´α ヽ0ヾι゜α´βά`0ι ヽヾοαιヾ0〃ι゛ές ゛αι σ仝´ヽ゜。ヾω´α〃ι゛ές
ヽ゜。ヾοφοヾί0ς σ〃α αáá゜ι゛ά. Α仝〃ές ¨0ヽ0ヾ`ού` 〃ις ヽヾοβ゜0ヽό´0`0ς αヽό 〃ο
`ό´ο ふá゜ώσσα ο仝~έ〃0ヾ。ぶ .
-
Specific Part
1 Technical description of the product
The fischer injection system FIS VL is a bonded anchor
consisting of a cartridge with injection mortar fischer FIS VL, FIS
VL High Speed or FIS VL Low Speed and a steel element.
The steel element is placed into a drilled hole filled with
injection mortar and is anchored via the bond between metal part,
injection mortar and concrete.
The product description is given in Annex A.
2 Specification of the intended use in accordance with the
applicable European Assessment Document
The performances given in Section 3 are only valid if the anchor
is used in compliance with the specifications and conditions given
in Annex B.
The verifications and assessment methods on which this European
Technical Assessment is based lead to the assumption of a working
life of the anchor of at least 50 years. The indications given on
the working life cannot be interpreted as a guarantee given by the
producer, but are to be regarded only as a means for choosing the
right products in relation to the expected economically reasonable
working life of the works.
3 Performance of the product and references to the methods used
for its assessment
3.1 Mechanical resistance and stability (BWR 1)
Essential characteristic Performance
Characteristic values for static and quasi-static action,
displacements
See Annex C 1 to C 6
3.2 Safety in case of fire (BWR 2)
Essential characteristic Performance
Reaction to fire Anchorages satisfy requirements for Class
A1
Resistance to fire No performance assessed
3.3 Hygiene, health and the environment (BWR 3) Regarding
dangerous substances there may be requirements (e.g. transposed
European
legislation and national laws, regulations and administrative
provisions) applicable to the products falling within the scope of
this European Technical Assessment. In order to meet the provisions
of Regulation (EU) No 305/2011, these requirements need also to be
complied with, when and where they apply.
3.4 Safety in use (BWR 4) The essential characteristics
regarding Safety in use are included under the Basic Works
Requirement Mechanical resistance and stability.
Appendix 1 / 19
-
4 Assessment and verification of constancy of performance (AVCP)
system applied, with reference to its legal base
In accordance with guideline for European technical approval
ETAG 001, April 2013 used as European Assessment Document (EAD)
according to Article 66 Paragraph 3 of Regulation (EU) No 305/2011
the applicable European legal act is: [96/582/EC].
The system to be applied is: 1
Appendix 2 / 19
-
Appendix 3 / 19
-
Appendix 4 / 19
-
Appendix 5 / 19
-
Appendix 6 / 19
-
Appendix 7 / 19
-
Appendix 8 / 19
-
Appendix 9 / 19
-
Appendix 10 / 19
-
Appendix 11 / 19
-
Appendix 12 / 19
-
Appendix 13 / 19
-
Appendix 14 / 19
-
Appendix 15 / 19
-
Appendix 16 / 19
-
Appendix 17 / 19
-
Appendix 18 / 19
-
Appendix 19 / 19