www.intertec.info Doors – Latching Systems SD512-5en Doors – Latching Systems page 1/5 1. For cabinets (un-manned) Locking systems BASIC CLASSIC Type 1: (1) Classic cabinet locking system • stainless steel • 5 mm slotted key or 7 mm square key • optional with Square/tringular key ● ○ Type 2: • swivel handle • black polyamide • equipped w. half profile cylinder (40 mm length) according to DIN 18252 ● ● Type 3: • swivel handle • stainless steel • equipped w. half profile cylinder (40 mm length) according to DIN 18252 ○ ○ Type 4: (1) • lever handle (Canada) • door latching system non lockable • optional with padlock ○ ○ Type 5: (1) • lever handle (Canada) • stainless steel • door latching system non lockable • optional with padlock ○ ○ Type 6: Used if two different key types are needed • swivel handle • for 2 half profile cylinder (HPC) • for 40/45 mm HPC ○ ○ ●= standard ○ = optional ─ = not available (1) also for frame window
5
Embed
Doors – Latching Systems · Doors – Latching Systems . SD512-5en Doors – Latching Systems page 3/5 . 2. For walk-in houses and cabinets. Note: Self-closing and lockable doors
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.intertec.info
Doors – Latching Systems
SD512-5en Doors – Latching Systems page 1/5
1. For cabinets (un-manned)
Locking systems BASIC CLASSIC
Type 1: (1) Classic cabinet locking system • stainless steel• 5 mm slotted key or
7 mm square key• optional with
Square/tringular key
● ○
Type 2: • swivel handle• black polyamide• equipped w. half profile cylinder
(40 mm length) according to DIN 18252
● ●
Type 3: • swivel handle• stainless steel• equipped w. half profile cylinder
(40 mm length) according to DIN 18252
○ ○
Type 4: (1) • lever handle (Canada)• door latching system non
lockable• optional with padlock
○ ○
Type 5: (1) • lever handle (Canada)• stainless steel• door latching system non
lockable • optional with padlock
○ ○
Type 6: Used if two different key types are needed • swivel handle• for 2 half profile cylinder (HPC)• for 40/45 mm HPC
○ ○
● = standard ○ = optional ─ = not available(1) also for frame window
www.intertec.info
Doors – Latching Systems
SD512-5en Doors – Latching Systems page 2/5
For cabinets (un-manned)
Locking systems (continued) BASIC CLASSIC
Type 7: • swivel handle• for 45 mm half profile cylinder• best solution for a large number
of in-house locking systems ○ ○
● = standard ○ = optional ─ = not available
Latching systems
Three-point latching system Double door latching system Multi-point latching system • For EEx p• Only in combination with
locking system Type 2
www.intertec.info
Doors – Latching Systems
SD512-5en Doors – Latching Systems page 3/5
2. For walk-in houses and cabinets
Note: Self-closing and lockable doors have to be used when accessing closed electrical service locations. Access doors must: - swing outwards (in escape direction)- can be opened from inside without a key at any time
Note 1: The requirements are not applicable, if the door is permanently opened during service andmaintenance and the cabinet cannot be manned.
- a security lock is used(according to DIN VDE 0100-731:2014-10, 731.729)
INTERTEC locking systems meet the requirements according to DIN EN 1125.
Equipped with…
• three-point latching system• safety profile cylinder• door handle outside• panic bar inside (equipped with double doors one panic bar for each door)• threshold protection inside
CLASSIC ARCTIC Handle • Non-metallic w. 2 rosettes
• 60 mm half profile cylinder• Non-metallic• 40 mm half profile cylinder
• Stainless steel (SS316)• 40 mm half profile cylinder