This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
25/08/2016 V9.01
Features:> High brightness surface mount LED.> 120° viewing angle.> Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.> Qualified according to JEDEC moisture sensitivity Level 2.> Compatible to IR reflow soldering.> Environmental friendly; RoHS compliance.
Power DomiLEDTM
With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals.
Applications:> Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL), > Display: full color display video notice board.> Industry: white goods (eg: Oven, microwave, etc.).> Lighting: architecture lighting, general lighting, garden light, etc
InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes.
All SMD LEDs that are currently shipped in the reel form. Please refer to section 3 for
the details; comparing current packing and label specification versus change proposed.
2. Product type affected:
All SMD LEDs that are currently shipped in the reel form.
3. Describe changes (to be):
Existing barcode printed label (BPL) used is as shown below.
Existing BPL size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL format will be
changed to the following.
New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barcode data are
implemented now for every data field.
325 x 225 x 190
325 x 225 x 280
570 x 440 x 230
570 x 440 x 460
0.38
0.54
1.46
1.92
9 reels MAX
15 reels MAX
60 reels MAX
120 reels MAX
25/08/2016 V9.013
Time (sec)0 50 100 150 200
300
250
225
200
175
150
125
100
75
50
25
275
Tem
pera
ture
(˚C
)
Classification Reflow Profile (JEDEC J-STD-020C)
Ramp-up3˚C/sec max.
255-260˚C10-30s
60-150s
Ramp-down
6˚C/secmax.
Preheat 60-180s
480s max
217˚C
Recommended Pb-free Soldering Profile
InGaN White : DWW-LJGDOMINANTOpto TechnologiesInnovating Illumination
TM
25/08/2016 V9.014
InGaN White : DWW-LJGDOMINANTOpto TechnologiesInnovating Illumination
TM
Appendix
1) Brightness:1.1 Luminous intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3).1.2 Luminous flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3).
2) Color:2.1 Chromaticity coordinate groups are measured with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3).2.2 DOMINANT wavelength is measured with an internal reproducibility of ± 0.5nm and an expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3).
3) Voltage:3.1 Forward Voltage, Vf is measured with an internal reproducibility of ± 0.05V and an expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3).
Revision History
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or sys-
tems without the express written approval from the Managing Director of DOMINANT Opto Technologies.
Page
-
2
2
2
2
2
5
3, 4, 7, 11
1, 2, 5, 6, 7, 14
Subjects
Initial Release
Update Thermal Resistance
Update Operating Temperature and Storage Temperature
Add new partno: DWW-LJG-XY1-1
Typo error on Vf
Not for new design: DWW-LJG-W2X-1
Add Graph: Chromaticity Coordinate Shift
Update Color Bin StructureUpdate Notes in Package Outline
Update Package Specification
Update Product PhotoUpdate Vf
Add Vf Binning (Optional)Update GraphAdd Appendix
Date of Modification
05 Apr 2012
13 Mar 2013
19 Aug 2013
05 Sep 2013
23 Jan 2014
20 Jun 2014
01 Oct 2014
02 Jun 2016
25 Aug 2016
InGaN White : DWW-LJG
25/08/2016 V9.0
DOMINANTOpto TechnologiesInnovating Illumination
TM
15
InGaN White : DWW-LJG
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certifi ed quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as in-dustrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.