Does your vinyl cutter display these symptoms? Material is stripped off the cutting edge Cutting accuracy is poor Cut line is wavy Cut line appears stitched Doesn’t cut accurately Start and end points do not match Vinyl Cutter Self-Maintenance Kit Cut like new with the
2
Embed
Does your vinyl cutter display these symptoms?...MK-GS24 MK-GR420 MK-GR540 MK-GR640 Self-Maintenance Kit Description Part Number GX-24 GX-300 GX-400 GX-500 GX-640 GS-24 GR-420 GR-540
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Does your vinyl cutter display
these symptoms?
Material is stripped o� the cutting edge
Cutting accuracy is poor
Cut line is wavy
Cut line appears stitched
Doesn’t cut accurately
Start and end points do not match
Vinyl Cutter Self-Maintenance KitCut like new with the
Degradation of pinch rollers Degradation of the cutter protection strip Bearing degradation Cutter blade wear
When the surface of the pinch roller deteriorates and it becomes impossible to feed a vinyl sheet evenly, the start and end points will not match.
If the surface of the cutter protection strip is scraped and the cutter blade enters the groove, blade jumping and a wavy cut will occur.
If the bearings inside the cutter blade holder are depleted, your graphics cannot be cut correctly.
If the cutter blade is worn out, edge stripping and blade jumping will occur.
Start and endpoints do not
match
Cuttingaccuracyis poor
Start and endpoints do not
match
Cut lineappearsstitched
Cut lineis wavy
Doesn’t cutaccurately
Material is stripped o�the cutting
edge
Cut lineappearsstitched
Cut lineis wavy
Material is stripped o�the cutting
edge
Cut lineappearsstitched
Cut lineis wavy
Watch theself-maintenance
videowww.rolanddg.com.au/cutlikenew
* CAMM-1 PRO GX-640 Self-Maintenance Kit
Maintain your cutter properly with the self-maintenance kit which contains all the necessary replacement parts.
CAMM-1/CAMM-1 PRO Self-Maintenance Kit
•Standard Cutting Blade •Cutter Pad •Blade Holder •Pinch Roller (M) •Pinch Roller (LR) •Sheet Cutter Blade Set •E-ring Holder (GR series does not include)